samsung SM-J320F Service Manual-Direy-6
7. Level 2 Repair
7-1. Disassembly
1 Detach LCD connector.
※ Caution
1) Be careful not to damage OCTA FPCB
2
※ Caution
1) Be careful not to damage the LCD
1) Put the device in the chamber for
5~10 minutes under 70~80℃.
2) Detach the LCD using Vaccum Jig.
3 Unscrew Rear 10 Point.
※ Caution
1) Be care of scratch and molding damage
4 Disassemble the REAR Hook
※ Caution
1) Be care of scratch and molding damage
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair
5
Disassemble the PBA Hook
6 Disassemble PBA from the
bracket.
※ Caution
1) Be care of PBA damage
7
Disassemble CAM from the PBA.
※ Caution
1) Be care of PBA damage
※ Caution
1) Be care of PBA damage
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Loading...