Notice: All functionality, features, specifications,
Common
1. Safety Precautions
2. Specification
3. Product Function
4. Exploded View and Parts list
5. MAIN Electrical Parts List
6. Level 1 Repair
7. Level 2 Repair
8. Level 3 Repair
9. Reference data
and other product information provided in this
document, including but not limited to, benefits,
design, pricing, components, performance,
availability, and capabiliti-es of the product are
subject to change without notice. Samsung
reserves the right to alter this doc-ument or the
product described herein at anytime, without
obligation to provide notification of such
changes.
This Service Manual is a property of Samsung Electronics Co.,Ltd.
Samsung Electronics Co.,Ltd
2017. 04. Rev 1.0
ⓒ
Any unauthorized use of Manual can be punished under applicable
International and/or domestic law.
Charger : 5V/2A or 9 V/1.67 A
Data cable : USB Type-C
Confidential and pr oprietary-the contents in this service guide subjec t to change without pr ior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
9. Reference Abbreviate
Reference Abbreviate
― AAC: Advanced Audio Coding.
― AVC : Advanced Video Coding.
― BER : Bit Error Rate
― BPSK: Binary Phase Shift Keying
― CA : Conditional Access
― CDM : Code Division Multiplexing
― C/I : Carrier to Interference
― DMB : Digital Multimedia Broadcasting
― EN : European Standard
― ES : Elementary Stream
― ETSI: European Telecommunications Standards Institute
― MPEG: Moving Picture Experts Group
― PN : Pseudo-random Noise
― PS : Pilot Symbol
― QPSK: Quadrature Phase Shift Keying
― RS : Reed-Solomon
― SI : Service Information
― TDM : Time Division Multiplexing
― TS : Transport Stream
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
1. Safety Precautions
1-1. Repair Precaution
Before attempting any repair or detailed tuning, shield the device from RF noise or static
electricity discharges.
Use only demagnetized tools that are specifically designed for small electronic repairs,
as most electronic parts are sensitive to electromagnetic forces.
Use only high quality screwdrivers when servicing products. Low quality screwdrivers can
easily damage the heads of screws.
Use only conductor wire of the properly gauge and insulation for low resistance, because of the low margin
of error of most testing equipment.
We recommend 22-gauge twisted copper wire.
Hand-soldering is not recommended, because printed circuit boards (PCBs) can be easily
damaged, even with relatively low heat. Never use a soldering iron with a power rating of
more than 100 watts and use only lead-free solder with a melting point below 250°C (482°F).
Prior to disassembling the battery charger for repair, ensure that the AC power is disconnected.
Always use the replacement parts that are registered in the SEC system. Third-party replacement parts
may not function properly.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Many semiconductors and ESDs in electronic devices are particularly sensitive to static discharge and can
be easily damaged by it. We recommend protecting these components with conductive anti-static bags
when you store or transport them.
Always use an anti-static strap or wristband and remove electrostatic buildup or dissipate
static electricity from your body before repairing ESDs.
Ensure that soldering irons have AC adapter with ground wires and that the ground wires are properly
connected.
Use only desoldering tools with plastic tips to prevent static discharge.
Properly shield the work environment from accidental electrostatic discharge before opening
packages containing ESDs.
The potential for static electricity discharge may be increased in low humidity environments,
such as air-conditioned rooms. Increase the airflow to the working area to decrease the
chance of accidental static electricity discharges.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
※
GH39-01887A
6-1. S/W Download
6-1-1. Prepare for S/W Downloading
Installation program: Downloader Program (Odin3 v3.12.10.exe)
Mobile Phone
Data Cable
Mobile device specific S/W: Binary files
Settings
Data Cable :
Confidential and pr oprietary-the contents in this service guide subjec t to change without pr ior notice
Distribution, transmission, or infringem ent of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
6-1-2. S/W Installation Program (Downloader program)
Open up the S/W Installation Program by executing the "Odin3 v3.12.10.exe"
Confidential and pr oprietary-the contents in this service guide subjec t to change without pr ior notice
Distribution, transmission, or infringem ent of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
1. Enable the check mark by click on the following options,
- Check Auto Reboot, F. Reset Time, N and Erase
- Check PIT
- Check BOOTLOADER, PDA, PHONE, CSC and USERDATA Files
* Note : "Odin v3.12.10 or above" checks MD5 checksum just after file selection.
Confidential and pr oprietary-the contents in this service guide subjec t to change without pr ior notice
Distribution, transmission, or infringem ent of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
2. Enter into Download Mode
- Enter into Download Mode by pressing Volume Down button, Intelligence button and ON/OFF Button
simultaneously followed by pressing Volume up button as a direction of the phone.
Confidential and pr oprietary-the contents in this service guide subjec t to change without pr ior notice
Distribution, transmission, or infringem ent of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
3. Connect the device to PC via Data Cable.
Make sure that the one of communication ports [ID:COM] box is highlighted in
sky blue. The device is now connected with the PC and ready to download the
binary files in it.
Confidential and pr oprietary-the contents in this service guide subjec t to change without pr ior notice
Distribution, transmission, or infringem ent of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
※
4. Start downloading the binary files into the device by clicking Start button on the
screen. The green colored "PASS!" sign will appear on the upper-left box if the
binary files have been successfully downloaded into the device.
5. Disconnect the device from the Data cable.
6. Once the device boots up, you can check the version of the binary file or name
by pressing the following code in sequence;*#1234#
You can perform Factory data Reset by Settings → General Management → Reset
Caution. Never disconnect during the S/W downloading.
Confidential and pr oprietary-the contents in this service guide subjec t to change without pr ior notice
Distribution, transmission, or infringem ent of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
Library Install
To use Daseul, library files should be installed.
Launcher
DASEUL_SVC_Launcher_v3.0.12 or higher
Runtime File
1. DASEUL_IMEI_ALL_Runtime_3.1.281.0_r00405.CAB or higher
Model File
Copy Model File under the ‘Model Name’ folder
6-2. IMEI writing
6-2-1. Preparation
- New IMEI writing Program has been released.
- Supported Model : Models which CAB files are uploaded on HHPsvc INI File
category, instead of ini file.
- Refer to below IMEI writing procedure.
- H/W
- S/W
①
Refer to SVC Bulletin
“(11-82) Daseul (New IMEI writing Program) Library Install guide_rev1.0”
②
③
④
Distribution, transmission, or infringem ent of any content or data from this document without Samsung’s written authorization is strictly prohibited.
-Uploaded on HHPsvc Notice
-Uploaded on HHPsvc Notice
2. Make ‘ModelName’ folder at the same position with
launcher & Runtime file.
Confidential and pr oprietary-the contents in this service guide subjec t to change without pr ior notice
6. Level 1 Repair
1. Run DASEUL_SVC_Launcher_v3.0.12.exe
2. Select Service Mode
Model name
6-2-2 IMEI writing Process
3. Click and Select folder where the Launcher exists
Confidential and pr oprietary-the contents in this service guide subjec t to change without pr ior notice
Distribution, transmission, or infringem ent of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
4. Select Model
5. Check IMEI and click System Setting
※
Model name
Model name
Once you setup the setting, you don t have to do it again, unless there is change.
From second run of the IMEI program, check IMEI and click Extract & Run.
Distribution, transmission, or infringem ent of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Confidential and pr oprietary-the contents in this service guide subjec t to change without pr ior notice