![](/html/43/43cf/43cf9b9f172bd9ca9de8e3f72f38fd9235b56688036bf89ef8228f029962f468/bg1.png)
7-1. Components on the Rear Case
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
![](/html/43/43cf/43cf9b9f172bd9ca9de8e3f72f38fd9235b56688036bf89ef8228f029962f468/bg2.png)
Tweezers / Disass'y Stick / Screw Driver(X,Y)
A OCTA Disassembly Holder
7-2. Pre-requisite
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
![](/html/43/43cf/43cf9b9f172bd9ca9de8e3f72f38fd9235b56688036bf89ef8228f029962f468/bg3.png)
BOM Description & part code
Back glass Outside tape
[GH81-17066A]
It needs all when the
Back glass is
removed/replaced
7-3. Parts which must be changed after repair
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
![](/html/43/43cf/43cf9b9f172bd9ca9de8e3f72f38fd9235b56688036bf89ef8228f029962f468/bg4.png)
※ Caution
Be careful not to damage set and OCTA.
※ Caution
Be care of scratch and molding damage.
※ Caution
Be care of damage to components.
※ Caution
Be care of damage to components.
Disassemble SIM Tray from device.
Unscrew 13Points.
Disassemble the REAR from Front Assy.
1. Unscrew 2 Points from Camera module.
2. Disassemble 2ea materials from Slide part.
1. Put the device in the chamber or
Please confirm the heating condition
can use manufactural jig if possible.
7-4. Disassembly
Hot plate as below heating condition
- SOC 68%↓: 70℃/10~20min
- SOC 68%↑: Discharge until 68%↓
※
released lastly, and follow it.
2. Detach the Back glass using
disassembly jig.
※ Below picture shows how to detach
Back Glass using service jig, however you
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.