Samsung SM-A300M service manual Direy

Level

7.

7-1.

Pre-requisite

Tweezers/Disass'y Stick/Screw Driver Anti-statoc Gloves

Repair

2

OCTA Disassembly Holder Anti-static Mat

Acryl Jig Rework Form Glass Absorbers(2ea)

Tape Rework Form Mobile Dryer

7-1

Confidential and proprietary-the contents in this service guide subject to change without prior notice.

Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.

Level2Repair

Parts which must be changed after repair

7-2.

OCTA Form Tape

Touch Key Top Tape

7-2

Confidential and proprietary-the contents in this service guide subject to change without prior notice.

Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.

Disassembly

7-3.

Level2Repair

1

1)Afterheatingfor10minutethedeviceat
80ºC, take out the dviec from Mobile dryer

2

1) Detach the Bracket Cu tape carefully from the
OCTA Cu sheet suing Glass absorber and holder.

2) Be careful not to separate LCD from TSP

3

4

1) Disassemble loosen 12 Point of Bracket 1) Disassemble Bracket and REAR

7-3

Confidential and proprietary-the contents in this service guide subject to change without prior notice.

Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.