Samsung SLC480FW User Manual

Clearing paper jams

Original paper jam in exit area of scanner

• Illustrations on this user’s guide may differ from your machine depending on its options or models. Check your machine type (see "Front view" on page 21).

• This troubleshooting may not be available depending on model or optional goods (see "Front view" on page 21).

Remove any remaining pages from the document feeder.

Gently remove the jammed paper from the document feeder.

4. Troubleshooting

101

Understanding the status LED

The color of the LED indicates the machine's current status.

• Some LEDs may not be available depending on model or country (see "Control panel overview" on page 24).

• To resolve the error, look at the error message and its instructions from the troubleshooting part (see "Understanding display messages" on page 104).

• You also can resolve the error with the guideline from the computer’s Samsung Printing Status window (see "Using Samsung Printer Status" on page 255).

• If the problem persists, call a service representative.

LED Status Description

Off The machine is off-line.

Blinking When the backlight blinks, the machine is receiving or printing data.

Blue

On • The machine is on-line and can be used.

Status

Orange

Blinking

• A minor error has occurred and the machine is waiting for the error to be cleared. Check the display message. When the problem is cleared, the machine resumes.

• Small amount of toner is left in the cartridge. The estimated cartridge life

of toner is close. Prepare a new

cartridge for replacement. You may temporarily increase the printing quality by redistributing the toner (see

"Redistributing toner" on page 78).

• A toner cartridge has almost reached its estimated cartridge life

. It is recommended to replace the toner

cartridge (see "Replacing the toner cartridge" on page 80).

• The cover is opened. Close the cover.

• There is no paper in the tray when receiving or printing data. Load paper in the tray.

• The machine has stopped due to a major error. Check the display message (see "Understanding display messages" on page 104).

• A paper jam has occurred (see "Clearing paper jams" on page 95).

4. Troubleshooting

102

Understanding the status LED

LED Status Description

Blinking The machine is connecting to a wireless network.

Wireless

Power/Wake Up ( )

Eco Green

Scan to

a. Estimated cartridge life means the expected or estimated toner cartridge life, which indicates the average capacity of print-outs and is designed pursuant to ISO/IEC 19798. The number of pages

may be affected by operating environment, percentage of image area, printing interval, graphics, media and media size. Some amount of toner may remain in the cartridge even when red LED is on and the printer stops printing.

b. Some LEDs may not be available depending on model or country (see "Control panel overview" on page 24).

Blue

Green

Off The machine is disconnected from a wireless network.

On The machine is in power save mode.

Off The machine is in ready mode or machine’s power is off.

On Eco mode is on.

Off Eco mode is off.

On Scan mode is on.

Off Scan mode is off and copy mode is on.

The machine is connected to a wireless network (see "Wireless network setup" on page 155).

The default setting of Eco mode is 2-up and toner save.

Switches between scan and copy mode. The Scan to LED turns on scan mode and turns off on copy mode.

4. Troubleshooting

103

Understanding display messages

Messages appear on the control panel display to indicate the machine’s status or errors. Refer to the tables below to understand the messages’ and their meaning, and correct the problem, if necessary.

• This function is not supported for the devices which has a control panel display. You can resolve the error with the guideline from the computer’s

Printing Status window (see "Using Samsung Printer Status" on page

255).

• If a message is not in the table, reboot the power and try the printing job again. If the problem persists, call a service representative.

• When you call for service, provide the service representative with the contents of display message.

• Some messages may not appear on the display depending on the options or models.

• [error number] indicates the error number.

• [tray type] indicates the tray number.

• [media type] indicates the media type.

• [media size] indicates the media size.

Paper Jam-related messages

Message Meaning Suggested solutions

Document jam.

Remove jam

Jam or empty

Door open&close

Paper Jam

inside machine

Paper Jam in tray Paper has jammed in the

The loaded original document has jammed in the document feeder.

• Paper has jammed in the paper feed area.

• There is no paper in tray.

Paper has jammed inside the machine.

paper tray.

Clear the jam (see "Original paper jam" on page 99).

• Clear the jam (see "In tray" on page 96).

• Load paper in tray (see "Loading paper in the tray" on page 40).

Clear the jam (see "Inside the machine" on page 97).

Clear the jam (see "Clearing paper jams" on page 95).

• [color] indicates the color of toner.

Paper Jam

in exit area

Paper Empty in [tray type]

Paper has jammed in the exit area.

There is no paper in tray. Load paper in tray (see

Clear the jam (see "Original paper jam in exit area of scanner" on page 101).

"Loading paper in the tray" on page 40).

4. Troubleshooting

104

Understanding display messages

Message Meaning Suggested solutions

Toner-related messages

Message Meaning Suggested solutions

• Install Toner

• Install toner

cartridge

• Not Compatible

[color] toner

• Not Compatible

toner cartridge

Not original

[color] toner

• Prepare toner

• Prepare new

cartridge

A toner cartridge is not installed.

The toner cartridge is not suitable for your machine.

The toner cartridge is not a Samsung-genuine toner cartridge.

Small amount of toner is left in the indicated cartridge. The estimated cartridge life of toner is close.

Install a toner cartridge.

Install the corresponding toner cartridge with a Samsung-genuine cartridge.

Prepare a new cartridge for a replacement. You may temporarily increase the printing quality by redistributing the toner (see "Redistributing toner" on page 78).

• Replace toner

• Replace new

cartridge

The indicated toner cartridge has almost reached its

estimated cartridge life.

The indicated toner cartridge has reached its estimated

cartridge life. might stop printing.

The machine

• You can choose Stop or Continue as shown on the control panel. If you select Stop, the printer stops printing and you cannot print any more without changing the cartridge. If you select Continue, the printer keeps printing but the printing quality cannot be guaranteed. Besides, it can cause serious damage to your machine.

• Replace the toner cartridge for the best print quality when this message appears. Using a cartridge beyond this stage can result in printing quality issues (see "Replacing the toner cartridge" on page 80).

Replace the toner cartridge (see "Replacing the toner cartridge" on page 80).

a. Estimated cartridge life means the expected or estimated toner cartridge life, which indicates

the average capacity of print-outs and is designed pursuant to ISO/IEC 19798 (see "Available supplies" on page 75). The number of pages may be affected by operating environment, percentage of image area, printing interval, media, percentage of image area, and media size. Some amount of toner may remain in the cartridge even when replace new cartridge appears and the machine stops printing.

4. Troubleshooting

105

Understanding display messages

Samsung does not recommend using a non-genuine Samsung toner cartridge such as refilled or remanufactured. Samsung cannot guarantee a non-genuine Samsung toner cartridge's quality. Service or repair required as a result of using non-genuine Samsung toner cartridges will not be covered under the machine warranty.

4. Troubleshooting

106

Understanding display messages

Message Meaning Suggested solutions

Tray-related messages

• BOOTP problem:

Auto IP Run

There is a problem with the network.

Change the Auto IP.

Message Meaning Suggested solutions

Jam or empty

Door open&close

• Paper has jammed in the paper feed area.

• There is no paper in tray.

• Clear the jam (see "In tray" on page 96).

• Load paper in tray (see "Loading paper in the tray" on page 40).

Network-related messages

Message Meaning Suggested solutions

Network Problem:

IP Conflict

The network IP address you have set is being used by someone else.

Check the IP address and reset it if necessary (see "Printing a network configuration report" on page 144).

• DHCP problem:

Auto IP Run

• BOOTP problem:

Reconfigure DHCP

• DHCP problem:

Reconfigure DHCP

802.1x

Network Error

Misc. messages

The IP address assignment is failed. This happens, when Auto IP for BOOTP/DHCP is set in SyncThru™ Web Service.

Fail to authenticate. Check the network

Change the IP address assignment method to DHCP/BOOTP or Static. If you do not change this option, the BOOTP/DHCP server continually asks to assign the IP Address.

authentication protocol. If the problem persists, contact your network administrator.

Wireless

Network Error

Wireless module is not installed.

Reboot the power and try the printing job again. If the problem persists, please call for service.

Message Meaning Suggested solutions

Adjusting Color

Registration

The machine is adjusting the color registration.

Wait a few minutes.

4. Troubleshooting

107

Understanding display messages

Message Meaning Suggested solutions

Calibrating

image density…

Door Open

Close it

Scan Unit Open

or Exit JAM

Door of scanner is open.

Error [error number]

Install [color] toner

Error [error number]

Turn off then on

Error [error number]

Call for service

The machine is calibrating the image density.

The cover is not securely latched.

The scan unit is not securely latched or paper has jammed in the scanner area.

The cover of scanner is not securely latched.

The indicated toner cartridge is installed improperly, or the connector is polluted.

The machine unit cannot be controlled.

Wait a few minutes.

Close the cover until it locks into place.

• Clear the jam (see "Original paper jam" on page 99).

• Close the cover until it locks into place.

Close the cover until it locks into place.

Reinstall the Samsunggenuine toner cartridge two or three times to confirm it is seated properly. Or clean the connector. If the problem persists, contact the service representatives.

Reboot the power and try the printing job again. If the problem persists, please call for service.

Message Meaning Suggested solutions

Scanner Locked The scanner is locked. Reboot the power. If the

problem persists, please call for service.

Install TR.

belt unit.

Not compatible

transfer belt

Not installed

Waste tank

Check Fax Line The fax line is not properly

Not proper room

temp. Move set

Output bin Full

Remove paper

The transfer belt is not installed.

The transfer belt of the machine is not for your machine.

The waste toner container is not installed.

connected to the LINE port.

The machine is in a room with improper room temperature.

The output tray is full. Or the sensor is not facing down.

Install a Samsunggenuine transfer belt.

Install the a Samsunggenuine part designed for your machine.

Install a Samsunggenuine waste toner container.

Connect the fax line to the LINE port not to the EXT port (see "Rear view" on page 23).

Move the machine to a room with proper room temperature.

Remove papers from the output tray, the machine resumes printing. Or make sure the sensor is facing down. If the problem persists, call for service.

4. Troubleshooting

108

Understanding display messages

Message Meaning Suggested solutions

Prepare new

Transfer belt

Replace new

Transfer belt

Transfer Belt Error The transfer belt cannot be

Prepare new

Transfer roller

Replace new

Transfer roller

The life of the transfer belt will expired soon.

The life of the transfer belt has expired.

controlled.

The life of the transfer belt will expired soon.

The life of the transfer belt has expired.

Replace the transfer belt with a new one. Contact the service representatives.

Reboot the power and try the printing job again. If the problem persists, please call for service.

Replace the transfer belt with a new one. Contact the service representatives.

Message Meaning Suggested solutions

Replace/Install Waste Toner Tank

Prepare new

Imaging unit

Replace with

new imaging unit

Install

imaging unit

Error [error number]

Door open/close

The life span of the waste toner container has expired and the printer will stop printing until a new waste toner container is placed into the printer.

The life of the imaging unit will be expired soon.

The life of the imaging unit will be expired.

The imaging unit is not installed

The imaging unit is installed improperly, or the cover is not securely latched.

Replace a waste toner container with a Samsung-genuine waste toner container.

Replace the imaging unit with a new one. Contact the service representatives.

Reinstall the imaging unit to confirm it is seated properly. Close the cover until it locks into place.

Replace

Fuser Soon

Replace new

Fuser unit

The life of the fuser unit will be expired soon.

The life of the fuser unit will be expired.

Replace the fuser unit with a new one. Contact the service representatives.

4. Troubleshooting

109

5. Appendix

This chapter provides product specifications and information concerning applicable regulations.

• Specifications 111

• Regulatory information 120

• Copyright 133

Specifications

General specifications

These specifications are subject to change without notice. To see additional specifications and information about changes to the specifications, please visit

www.samsung.com.

Items Description

Dimension Width x Length x Height

C48x

/C48xW series

C48xFN/C48xFW series 406 x 362 x 333.5 mm (16 x 14.3 x 13.1 inches)

Weight Machine without consumables

C48x

/C48xW series

C48xFN/C48xFW series 13.96 Kg (30.78 lbs)

Noise Level

Ready mode Background noise level

Print mode Color printing Less than 46 dB (A)

Black and white printing Less than 48 dB (A)

Copy mode Scanner glass Less than 52 dB (A)

Document feeder Less than 53 dB (A)

Scan mode Scanner glass Less than 51 dB (A)

Document feeder Less than 51 dB (A)

Temperature Operation 10 to 30°C (50 to 86°F)

406 x 362 x 288.6 mm (16 x 14.3 x 11.4 inches)

12.80 Kg (28.22 lbs)

Storage (packed) -20 to 40°C (-4 to 104°F)

5. Appendix

111

Specifications

Items Description

Humidity Operation 20 to 80% RH

Storage (packed) 10 to 90% RH

Power rating

110 volt models AC 110 - 127 V

220 volt models AC 220 - 240 V

Power consumption

Average operating mode Less than 290 W

Ready mode Less than 60 W

Power save mode • C48x: Less than 1.2 W

• C48xW: Less than 1.7 W (Wi-Fi Direct on: Less than 2.5 W)

• C48xFN: Less than 1.7 W

• C48xFW: Less than 2.1 W (Wi-Fi Direct on: Less than 2.9 W)

Power off mode

Network Standby Mode (All

Less than 0.45 W

• C48xW/C48xFW: Less than 1.15 W

Port Activation)

Wireless

a. Sound Pressure Level, ISO 7779. Configuration tested: basic machine installation, A4 paper, simplex printing. b. China only: If the equipment's noise is louder than 63 db (A) ,the equipment should be placed in region of relatively independent advice. c. See the rating label on the machine for the correct voltage (V), frequency (hertz) and of current (A) for your machine. d. The power consumption may be affected by the machine’s status, setting conditions, operating environment, and measuring equipment and method the country uses. e. Power consumption can be completely avoided only when the power cable is not connected. f. Wireless models only (see "Features by model" on page 7).

Module SPW-B43143S

5. Appendix

112

Specifications

Print media specifications

Type Size Dimensions

Plain paper

Letter 216 x 279 mm (8.5 x 11 inches)

Legal 216 x 356 mm (8.5 x 14 inches)

US Folio 216 x 330 mm (8.5 x 13 inches)

A4 210 x 297 mm (8.27 x 11.69 inches)

Oficio 216 x 343 mm (8.5 x 13.5 inches)

JIS B5 182 x 257 mm (7.17 x 10.12 inches)

ISO B5 176 x 250 mm (6.93 x 9.84 inches)

Executive 184 x 267 mm (7.25 x 10.5 inches)

A5 148 x 210 mm (5.83 x 8.27 inches)

A6 105 x 148 mm (4.13 x 5.83 inches)

Print media weight/Capacity

Tray

60 to 85 g/m

• 150 sheets of 75 g/m

(16 to 23 lbs bond)

(20 lbs bond)

• Maximum stack height : 15.5mm (0.6 inches)

Thick paper

Thin paper

Refer to the Plain paper section

86 to 120 g/m

(23 to 32lbs bond)

• 5 sheets

60 to 70 g/m

• 150 sheets of 60 g/m

(16 to 19 lbs bond)

(16 lbs bond)

• Maximum stack height : 15.5mm (0.6 inches)

5. Appendix

113

Specifications

Type Size Dimensions

Cotton

Colored,

Pre-printed,

Recycled

Labels

Refer to the Plain paper section

Letter, Legal, Oficio, US Folio, A4, JIS B5, ISO B5, Executive, A5

Refer to the Plain paper section

Print media weight/Capacity

Tray

75 to 90 g/m

• 150 sheets of 75 g/m

60 to 85 g/m

• 150 sheets of 75 g/m

(20 to 24 lbs bond)

(20 lbs bond)

(16 to 24 lbs bond)

(20 lbs bond)

• Maximum stack height : 15.5mm (0.6 inches)

60 to 85 g/m

• 150 sheets of 75 g/m

(16 to 24 lbs bond)

(20 lbs bond)

• Maximum stack height : 15.5mm (0.6 inches)

120 to 150 g/m

(32 to 40 lbs bond)

• 5 sheets

Card stock

Bond paper

Letter, Legal, Oficio, US Folio, A4, JIS B5, ISO B5, Executive, A5,

Postcard 4x6

Refer to the Plain paper section

121 to 163 g/m

• 5 sheets

105 to 120 g/m

• 10 sheets

(32 to 43 lbs bond)

(28 to 32 lbs bond)

5. Appendix

114

Specifications

Type Size Dimensions

Archive

Refer to the Plain paper section

70 to 90 g/m

• 100 sheets

• Maximum stack height : 15.5mm (0.6 inches)

Glossy Photo,

Matte Photo

Letter, A4,

Postcard 4x6

Minimum size (custom) 105 x 148.5 mm (4.13 x 5.85 inches)

Refer to the Plain paper section

111 to 220 g/m

• 1 sheets

60 to 120 g/m

Maximum size (custom) 216 x 356 mm (8.5 x 14 inches)

a. Maximum capacity may differ depending on media weight, thickness, and environmental conditions. b. The smoothness of the labels used in this machine is 100 to 250 (sheffield). This means the numeric level of smoothness.

If media weight is over 120 g/m2 (32 lbs bond), load a paper into the tray one by one.

Print media weight/Capacity

(18.6 to 24 lbs bond)

(30 to 58 lbs bond)

(16 to 32 lbs bond)

Tray

5. Appendix

115

Specifications

System requirements

Microsoft® Windows

Operating system

Windows® XP Service Pack 3 Intel® Pentium® III 1 GHz (Pentium IV 2 GHz)

Windows Server® 2003 Intel® Pentium® III 1 GHz (Pentium IV 2 GHz)

Windows Server® 2008 Intel® Pentium® IV 1 GHz (Pentium IV 2 GHz)

Windows Vista

Windows® 7 Intel® Pentium® IV 1 GHz 32-bit or 64-bit processor or higher

Windows Server® 2008 R2 Intel® Pentium® IV 1 GHz (x86) or 1.4 GHz (x64) processors (2 GHz or faster)

Intel® Pentium® IV 3 GHz

• Support for DirectX

•DVD-R/W Drive

Requirement (recommended)

CPU RAM free HDD space

9 graphics with 128 MB memory (to enable the Aero theme).

512 MB (1 GB) 1.5 GB

512 MB (2 GB) 10 GB

512 MB (1 GB) 15 GB

1 GB (2 GB) 16 GB

512 MB (2 GB) 10 GB

Windows® 8

Windows

Windows Server® 2012

Windows Server

8.1

2012 R2

Intel

Pentium® IV 1 GHz 32-bit or 64-bit processor or higher

• Support for DirectX

•DVD-R/W Drive

Intel

Pentium® IV 1.4 GHz (x64) processors (2 GHz or faster)

9 graphics with 128 MB memory (to enable the Aero theme).

2 GB (2 GB) 20 GB

512 MB (2 GB) 32 GB

5. Appendix

116

Specifications

• Internet Explorer 6.0 or higher is the minimum requirement for all Windows operating systems.

• Users who have administrator rights can install the software.

• Windows Terminal Services is compatible with your machine.

Mac

Operating system

Requirements (Recommended)

CPU RAM Free HDD space

Mac OS X 10.6

Mac OS X 10.7 - 10.10

•Intel

processors

1 GB (2 GB) 1 GB

2 GB 4 GB

5. Appendix

117

Specifications

Linux

Items Requirements

Operating system Red Hat Enterprise Linux 5, 6, 7

Fedora 11, 12, 13, 14, 15, 16, 17, 18, 19, 20

OpenSUSE 11.2, 11.3, 11.4, 12.1, 12.2, 12.3, 13.1

Ubuntu 10.04, 10.10, 11.04, 11.10, 12.04, 12.10, 13.04, 13.10, 14.04

SUSE Linux Enterprise Desktop 10, 11

Debian 6.0, 7.0

Mint 13, 14, 15, 16, 17

CPU Pentium IV 2.4GHz (Intel Core™2)

RAM 512 MB (1 GB)

Free HDD space 1 GB (2 GB)

5. Appendix

118

Specifications

Network environment

Network and wireless models only (see "Features by model" on page 7).

You need to set up the network protocols on the machine to use it as your network machine. The following table shows the network environments supported by the machine.

Items Specifications

Network interface • Ethernet 10/100 Base-TX Wired Lan

•802.11b/g/n Wireless LAN

Network operating system

•Windows

XP Service Pack 3, Windows Server® 2003, Windows Vista®, Windows® 7/8, Windows Server® 2008 R2

•Various Linux OS

• Mac OS X 10.6 -10.10

Network protocols •TCP/IPv4

• DHCP, BOOTP

• DNS, WINS, Bonjour, SLP, UPnP

• Standard TCP/IP Printing (RAW), LPR, IPP, WSD

• SNMPv 1/2/3, HTTP

• TCP/IPv6 (DHCP, DNS, RAW, LPR, SNMPv 1/2/3, HTTP)

Wireless security • Authentication: Open System, Shared Key, WPA Personal, WPA2 Personal (PSK)

• Encryption: WEP64, WEP128, TKIP, AES

5. Appendix

119

Regulatory information

This machine is designed for a normal work environment and certified with several regulatory statements.

Laser safety statement

The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1 Subchapter J for Class I(1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 608251 : 2007.

Class I laser products are not considered to be hazardous. The laser system and printer are designed so there is never any human access to laser radiation above a Class I level during normal operation, user maintenance or prescribed service condition.

Warning

When using this product, these basic safety precautions should always be followed to reduce risk of fire, electric shock, and injury to persons:

Never operate or service the printer with the protective cover removed from laser/scanner assembly. The reflected beam, although invisible, can damage your eyes.

5. Appendix

120

Regulatory information

Ozone safety

This product’s ozone emission rate is under 0.1 ppm. Because ozone is heavier than air, keep the product in a place with good ventilation.

Perchlorate warning

This Perchlorate warning applies only to primary CR (Manganese Dioxide) Lithium coin cells in the product sold or distributed ONLY in California USA.

Perchlorate Material - special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate. (U.S.A. only)

Power saver

This printer contains advanced energy conservation technology that reduces power consumption when it is not in active use.

When the printer does not receive data for an extended period of time, power consumption is automatically lowered.

ENERGY STAR and the ENERGY STAR mark are registered U.S. marks.

For more information on the ENERGY STAR program see http:// www.energystar.gov

For ENERGY STAR certified models, the ENRGY STAR label will be on your machine. Check if your machine is ENERGY STAR certified.

Recycling

Recycle or dispose of the packaging material for this product in an environmentally responsible manner.

5. Appendix

121

Regulatory information

Correct disposal of this product (Waste electrical &

(The United States of America only)

electronic equipment)

(Applicable in countries with separate collection systems)

This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other s of waste and recycle them responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling.

Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.com/recyclingdirect Or call, (877) 278 - 0799

State of California Proposition 65 Warning (US Only)

Radio frequency emissions

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

FCC information to the user

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference, and

• This device must accept any interference received, including interference that may cause undesired operation.

5. Appendix

122

Regulatory information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or experienced radio TV technician for help.

Change or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.

Canadian radio interference regulations

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled “Digital Apparatus”, ICES-003 of the Industry and Science Canada.

Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils numériques de Classe B prescrites dans la norme sur le matériel brouilleur: “Appareils Numériques”, ICES-003 édictée par l’Industrie et Sciences Canada.

RFID (Radio Frequency Interface Device)

RFID operation is subject to the following two conditions:(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. (U.S.A., France, Taiwan only)

5. Appendix

123

Regulatory information

United States of America

Federal Communications Commission (FCC)

Intentional emitter per FCC Part 15

Low power, Radio LAN devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz/5 GHz Band, may be present (embedded) in your printer system. This section is only applicable if these devices are present. Refer to the system label to verify the presence of wireless devices.

Wireless devices that may be in your system are only qualified for use in the United States of America if an FCC ID number is on the system label.

The FCC has set a general guideline of 20 cm (8 inches) separation between the device and the body, for use of a wireless device near the body (this does not

Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it. Contact manufacturer for service.

FCC Statement for Wireless LAN use:

While installing and operating this transmitter and antenna combination the radio frequency exposure limit of 1m W/cm2 may be exceeded at distances close to the antenna installed. Therefore, the user must maintain a minimum distance of 20cm from the antenna at all times. This device cannot be colocated with another transmitter and transmitting antenna.

include extremities). This device should be used more than 20 cm (8 inches) from the body when wireless devices are on. The power output of the wireless device (or devices), which may be embedded in your printer, is well below the RF exposure limits as set by the FCC.

This transmitter must not be collocated or operation in conjunction with any other antenna or transmitter.

Operation of this device is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device.

Taiwan only

5. Appendix

124

Regulatory information

Taiwan only

China only

Website: http://www.samsung.com/cn/support/location/ supportServiceLocation.do?page=SERVICE.LOCATION

᳝ᆇ⠽䋼

5. Appendix

125

Regulatory information

Russia / Kazakhstan / Belarus only

Germany only

Thailand only

Canada only

This product meets the applicable Industry Canada technical specifications. / Le present materiel est conforme aux specifications techniques applicables d’Industrie Canada.

The Ringer Equivalence Number (REN) is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination of an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices not exceed five. / L’indice d’equivalence de la sonnerie (IES) sert a indiquer le nombre maximal de terminaux qui peuvent etre raccordes a une interface telephonique. La

Turkey only

terminaison d’une interface peut consister en une combinaison quelconque de dispositifs, a la seule condition que la somme d’indices d’equivalence de la sonnerie de tous les dispositifs n’excede pas cinq.

5. Appendix

126

Regulatory information

Fax Branding

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone facsimile machine unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission the following information:

1 the date and time of transmission

2 identification of either business, business entity or individual sending the

message; and

3 telephone number of either the sending machine, business, business entity

or individual.

The Telephone Company may make changes in its communications facilities, equipment operations or procedures where such action is reasonably required in the operation of its business and is not inconsistent with the rules and regulations in FCC Part 68. If such changes can be reasonably expected to render any customer terminal equipment incompatible with telephone company communications facilities, or require modification or alteration of such terminal equipment, or otherwise materially affect its use or performance, the customer

Ringer Equivalence Number

The Ringer Equivalence Number and FCC Registration Number for this machine may be found on the label located on the bottom or rear of the machine. In some instances you may need to provide these numbers to the telephone company.

The Ringer Equivalence Number (REN) is a measure of the electrical load placed on the telephone line, and is useful for determining whether you have “overloaded” the line. Installing several s of equipment on the same telephone line may result in problems making and receiving telephone calls, especially ringing when your line is called. The sum of all Ringer Equivalence Numbers of the equipment on your telephone line should be less than five in order to assure proper service from the telephone company. In some cases, a sum of five may not be usable on your line. If any of your telephone equipment is not operating properly, you should immediately remove it from your telephone line, as it may cause harm to the telephone network.

The equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the rear of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.

shall be given adequate notice in writing, to allow the customer an opportunity to maintain uninterrupted service

5. Appendix

127

Regulatory information

FCC Regulations state that changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. In the event that terminal equipment causes harm to the telephone network, the telephone company should notify the customer that service may be stopped. However, where prior notice is impractical, the company may temporarily cease service, providing that they:

a promptly notify the customer. b give the customer an opportunity to correct the equipment problem. c inform the customer of the right to bring a complaint to the Federal

Communication Commission pursuant to procedures set out in FCC Rules and Regulations Subpart E of Part 68.

You should also know that:

• Your machine is not designed to be connected to a digital PBX system.

• If you intend to use a computer modem or fax modem on the same phone line as your machine, you may experience transmission and reception problems with all the equipment. It is recommended that no other equipment, except for a regular telephone, share the line with your machine.

• If your area experiences a high incidence of lightning or power surges, we recommend that you install surge protectors for both the power and the telephone lines. Surge protectors can be purchased from your dealer or telephone and electronic specialty stores.

• When programming emergency numbers and/or making test calls to emergency numbers, use a non-emergency number to advise the emergency service dispatcher of your intentions. The dispatcher will give you further instructions on how to actually test the emergency number.

• This machine may not be used on coin service or party lines.

• This machine provides magnetic coupling to hearing aids.

You may safely connect this equipment to the telephone network by means of a standard modular jack, USOC RJ-11C.

Replacing the Fitted Plug (for UK Only)

Important

The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug and has a 13 amp fuse. When you change or examine the fuse, you must re-fit the correct 13 amp fuse. You then need to replace the fuse cover. If you have lost the fuse cover, do not use the plug until you have another fuse cover.

Contact the people from you purchased the machine.

The 13 amp plug is the most widely used in the UK and should be suitable. However, some buildings (mainly old ones) do not have normal 13 amp plug sockets. You need to buy a suitable plug adaptor. Do not remove the moulded plug.

5. Appendix

128

Regulatory information

If you cut off the moulded plug, get rid of it straight away.

You cannot rewire the plug and you may receive an electric shock if you plug it into a socket.

Important warning:

You must earth this machine.

The wires in the mains lead have the following color code:

• Green and Yellow: Earth

• Blue: Neutral

• Brown: Live

If the wires in the mains lead do not match the colors marked in your plug, do the following:

Declaration of conformity (European countries)

Approvals and Certifications

Hereby, Samsung Electronics, declares that this [Xpress C48x series] is in compliance with the essential requirements and other relevant provisions of Low Voltage Directive (2006/95/EC), EMC Directive (2004/108/EC).

Hereby, Samsung Electronics, declares that this [Xpress C48xW series, Xpress C48xFN series, Xpress C48xFW series] is in compliance with the essential requirements and other relevant provisions of R&TTE Directive 1999/5/EC.

The declaration of conformity may be consulted at www.samsung.com, go to Support > Download center and enter your printer (MFP) name to browse the EuDoC.

You must connect the green and yellow wire to the pin marked by the letter “E” or by the safety ‘Earth symbol’ or colored green and yellow or green.

You must connect the blue wire to the pin which is marked with the letter “N” or colored black.

You must connect the brown wire to the pin which is marked with the letter “L” or colored red.

You must have a 13 amp fuse in the plug, adaptor, or at the distribution board.

January 1, 1995: Council Directive 2006/95/EC Approximation of the laws of the member states related to low voltage equipment.

January 1, 1996: Council Directive 2004/108/EC, approximation of the laws of the Member States related to electromagnetic compatibility.

March 9, 1999: Council Directive 1999/5/EC on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity. A full declaration, defining the relevant Directives and referenced standards can be obtained from your Samsung Electronics Co., Ltd. representative.

5. Appendix

129

Regulatory information

EC Certification

Certification to 1999/5/EC Radio Equipment & Telecommunications Terminal Equipment Directive (FAX)

This Samsung product has been self-certified by Samsung for pan-European single terminal connection to the analogue public switched telephone network (PSTN) in accordance with Directive 1999/5/EC. The product has been designed to work with the national PSTNs and compatible PBXs of the European countries:

In the event of problems, you should contact the Euro QA Lab of Samsung Electronics Co., Ltd. in the first instance.

The product has been tested against TBR21. To assist in the use and application of terminal equipment which complies with this standard, the European Telecommunication Standards Institute (ETSI) has issued an advisory document (EG 201 121) which contains notes and additional requirements to ensure network compatibility of TBR21 terminals. The product has been designed against, and is fully compliant with, all of the relevant advisory notes contained

European radio approval information (for products fitted with EU-approved radio devices)

Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz/5 GHz band, may be present (embedded) in your printer system which is intended for home or office use. This section is only applicable if these devices are present. Refer to the system label to verify the presence of wireless devices.

Wireless devices that may be in your system are only qualified for use in the European Union or associated areas if a CE mark is on the system label.

The power output of the wireless device or devices that may be embedded in you printer is well below the RF exposure limits as set by the European Commission through the R&TTE directive.

European states qualified under wireless approvals:

in this document.

EU countries

European states with restrictions on use:

EEA/EFTA countries

No limitations at this time

5. Appendix

130

+ 70 hidden pages