Please read this manual before operating your phone, and keep it for
future reference.
BMC_u740_UG_EN_08102007_D3
Intellectual Property
All Intellectual Property, as defined below, owned by or which is otherwise the
property of Samsung or its respective suppliers relating to the SAMSUNG Phone,
including but not limited to, accessories, parts, or software relating thereto (the
“Phone System”), is proprietary to Samsung and protected under federal laws,
provincial laws, and international treaty provisions. Intellectual Property includes,
but is not limited to, inventions (patentable or unpatentable), patents, trade secrets,
copyrights, software, computer programs, and related documentation and other
works of authorship. You may not infringe or otherwise violate the rights secured
by the Intellectual Property. Moreover, you agree that you will not (and will not
attempt to) modify, prepare derivative works of, reverse engineer, decompile,
disassemble, or otherwise attempt to create source code from the software. No title
to or ownership in the Intellectual Property is transferred to you. All applicable
rights of the Intellectual Property shall remain with SAMSUNG and its suppliers.
Openwave® is a registered Trademark of Openwave, Inc.
RSA® is a registered Trademark of RSA Security, Inc.
Post-it®is a registered Trademark of Minnesota Mining and Manufacturing
Company aka 3M CORPORATION DELAWARE.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any
use of such marks by Samsung Electronics Canada, Inc. is under license. Other
trademarks and trade names are those of their respective owners.
Disclaimer of Warranties; Exclusion of Liability
Except as set forth in the express warranty contained on the warranty page
enclosed with the product, the purchaser takes the product "as is", and Samsung
makes no express or implied warranty of any kind whatsoever with respect to the
product, including but not limited to the merchantability of the product or its
fitness for any particular purpose or use; the design, condition or quality of the
product; the performance of the product; the workmanship of the product or the
components contained therein; or compliance of the product with the
requirements of any law, rule, specification or contract pertaining thereto. Nothing
contained in the instruction manual shall be construed to create an express or
implied warranty of any kind whatsoever with respect to the product. In addition,
Samsung shall not be liable for any damages of any kind resulting from the
purchase or use of the product or arising from the breach of the express warranty,
including incidental, special or consequential damages, or loss of anticipated
profits or benefits.
Privacy
The privacy and copyright laws of Canada govern the disclosure, reproduction and
distribution of data, media and other content, including music and video content.
Certain activities, including downloads or transfer by any means (including, via
cable, Bluetooth® or otherwise) of such content may be an infringement of
privacy or copyright law. Neither Samsung Electronics Canada Inc. nor any of its
affiliates shall be liable or responsible for any data or content disclosed,
reproduced, downloaded or distributed by the user of this equipment.
Table of Contents
Getting Started ................................................................................... 1
Index .............................................................................................. 145
Getting Started
Closed View of Phone
1. Hold Key
11. Camera Lens
2. Power/Accessory
Connector
3. Volume Keys
4. External LCD
5. Rewind Key
6. Play/Pause Key
10. Flash
9. microSDTM Card
8. Camera/
7. Fast Forward
1. Hold Key: Allows you to lock/unlock the music keys (i.e. Rewind,
Play/Pause, and Fast Forward) on the front of the phone.
2. Power/Accessory Connector: The power/accessory interface connector
is used to plug in the charging accessories and also connect any
available accessory cables to your phone. This connector also allows
you to plug in an optional headset for safe, convenient conversations.
3. Volume Keys: Allows you to adjust the master volume in idle mode (with
the flip open) or adjust the voice volume during a call. To mute the
ringer during an incoming call, press the volume key up or down. When
the flip is closed, press and hold the key, and sub LCD displays.
4. External LCD: External LCD shows signal and battery strength, time,
day, and date. It also displays incoming calls or messages.
5. Rewind Key: Music rewind key.
6. Play/Pause Key: Music play or pause key.
7. Fast Forward Key: Music forward key.
8. Camera/Camcorder Key: This key is used to launch the integrated digital
camera.
Slot
Camcorder Key
Key
1 Getting Started
9. microSD™ Card Slot: This expansion slot allows you to insert a
microSD™ memory card to add additional memory and storage
capacity.
10. Flash: The built-in flash has manual and automatic capabilities.
11. Camera Lens: Allows you to take photos or shoot video.
Front View of Your Phone
15. Earpiece-Speaker (Right)
1. Internal LCD
14. Speaker (Left)
Getting Started
2. MENU/OK Key
3. Left Soft Key
4. TALK Key
5. Speakerphone Key
6. Camera/Camcorder
Key
7. Special Function
Keys
Soft Key is not functional in
Portrait Mode
Important: When opening the phone in Portrait Mode or Landscape Mode, it is important that
you open the phone straight up (90 degrees). Opening the phone partially in
Landscape Mode and then trying to open the phone in Portrait Mode may cause
damage to the hinge of the phone.
13. Navigation Keys
12. Right Soft Key
11. END Key
10. BACK Key
9. Alpha-numeric Keypad
7. Special Function
Keys
8. Microphone
1. Internal LCD: Displays all the information needed to operate your phone.
2. MENU/OK Key: Pressing when navigating through a menu accepts the
highlighted choice in a menu.
Getting Started 2
3. Left Soft Key: This key is used to navigate through menus and
applications by selecting the choice available in the Left Soft key Option.
4. TALK Key: Allows you to place or receive a call. In idle mode, press the
key once to access the recent call log.
5. Speakerphone Key: The speakerphone key allows you to hear the other
caller and the different ring tones and sounds offered by your phone.
The speaker also allows you to hear your music when not using
headphones.
6. Camera/Camcorder Key: This key is used to launch the integrated digital
camera when the phone is open.
7. Special Function Keys: Enters special characters. Perform various
functions.
8. Microphone: The Microphone allows the other caller to hear you clearly
when you are speaking to them.
9. Alpha-numeric Keypad: Use these keys to enter numbers, letters, and
characters.
10. BACK Key: Deletes characters from the display when you are in text
entry mode. Press to return to the previous menu or screen when
navigating features on your phone.
11. END Key: Ends a call. If you press and hold the END key, the power goes
On or Off. When you receive an incoming call, press to ignore the call
and send the call to voicemail.
12. Right Soft Key: This key is used to navigate through menus and
applications by selecting the choice available in the Right Soft key
Option.
13. Navigation Keys: These keys allow you to scroll through the phone
menu options.
14. Speaker (Left): Music, Ringtones, and Sounds are played through the
speaker. This speaker provides stereo sound for multimedia files by
acting as a left stereo speaker.
15. Earpiece-Speaker (Right): The earpiece allows you to hear the other
caller while in Portrait mode. When the phone is in a landscape
orientation, this speaker provides stereo sound for multimedia files by
acting as a right stereo speaker.
3 Getting Started
Viewing the Display Screen
Your phone’s interior and exterior display screens provides a wealth of
information about your phone’s status and options. This list identifies the symbols
you’ll see on your phone’s display screens:
indicates that your 1X web connection is active. Incoming voice calls go
directly to Voicemail; outgoing voice calls can be made, but the web
connection will terminate.
indicates that data is being transferred over the 1X network. The arrow
direction indicates whether the handset is sending or receiving data.
indicates that your 1X connection is dormant.
indicates that you are in a high-speed EV-DO coverage area.
indicates that you have an active EV-DO connection. When the arrows are
moving, data is being transferred over the EV-DO network.
indicates that the EV-DO connection is dormant.
indicates that position location is active.
indicates that position location is inactive.
indicates that your phone is in web security mode.
indicates that your phone is roaming.
indicates that you have a new Text Message.
indicates that you have a new Picture Message.
indicates that you have a new Voice Mail.
indicates that there is an unread message in your inbox.
indicates that the message has been read.
Getting Started
indicates that there is an unread urgent message in your inbox.
indicates that you have read the urgent message.
indicates that the message was sent.
Getting Started 4
indicates that the message failed to send.
X
indicates that you have a pending message to be sent.
indicates that the message is a draft.
indicates that there is URL contained in the text message.
indicates that the text message is locked. A locked message cannot be
deleted without confirmation.
indicates that your phone is in vibrate all mode.
indicates that your phone is set to ringer plus vibrate mode.
indicates that the ringer is turned off and vibrate is turned on.
indicates that the TTY option is On. This icon is displayed only when
earphones or a Bluetooth headset is in use.
indicates that the ringer is set at a level between 1-8 or that 1-Beep is
selected.
indicates that the ringer is turned off and the vibrate option is disabled.
indicates that an alarm is set on your phone.
tells you a call is in progress.
means there is no service, as your phone cannot find a signal.
displays your current signal strength. When you are receiving maximum
signal strength, five bars are shown.
displays your current battery strength at full.
displays your current battery strength at empty.
indicates that the handset is in Mute mode.
indicates that the handset is in Key Mute mode.
5 Getting Started
indicates that the handset is in Speaker mode.
L
indicates that the Camera is enabled.
indicates that the Camcorder is enabled.
indicates that the self-timer function is enabled. With the self timer
enabled, a set amount of time is required prior to taking a picture.
indicates that the white balance has been set to Sunny. This is used for
taking pictures outdoors on bright sunny days.
indicates that the white balance has been set to Cloudy. This is used for
taking pictures outdoors under cloudy conditions.
indicates that the white balance has been set to Tungsten. This is used for
taking pictures indoors under normal lighting conditions.
indicates that the white balance has been set to Fluorescent. This is used
for taking pictures indoors under fluorescent lighting conditions.
indicates that the white balance has been set to Manual. This is used for
taking pictures indoors or outdoors using your own custom settings.
indicates that a voice memo or video is being recorded.
indicates the key you must press to pause playback.
indicates the key you must press to play.
indicates that media has been uploaded to an online album or folder.
indicates that there is a voice caption attached to an image.
indicates that Bluetooth technology is enabled.
indicates that Bluetooth technology is hidden.
Getting Started
indicates that Bluetooth technology is connected.
indicates that Memory Card is inserted.
indicates that the music keys on the front of the phone are locked.
Getting Started 6
Your phone can also display a handy glossary of icons:
1. Press , highlight the Settings menu, and press .
2. Select Phone Info.
3. Select Icon Glossary.
4. Use the navigation keys to scroll through the list of icons.
MENU
OK
MENU
OK
Features of Your Phone
The SCH-u740 is lightweight, easy-to-use, reliable, and it also offers many
significant features and service options:
• Dual-band/Dual-Mode capability provides high-speed data and voice access
to other Digital Networks where roaming agreements are established. See
"Roaming" on page 26.
• Web Browser
the Web Browser" on page 41.
TM
provides access to the wireless Internet. See "Launching
• Streaming media. See "Media Player" on page 47.
• Music store and player. See "Music" on page 55.
• Downloadable games, ringers, screen savers, and applications allow you to
turn down time into fun time and to personalize your phone. See
"Downloads" on page 57.
• The Personal Organizer lets you schedule alerts to remind you of important
events. See "Planner" on page 79.
• 500 numbers stored in your Contacts list. Each Contact can have up to 5
phone numbers each. See "Contacts" on page 100.
• Hands-free interface using Voice Service. See "Voice Service" on page 28.
• 1.3 Megapixel Camera and Camcorder. See "Pictures/Videos" on page 87.
• Advanced Speech Recognition. See "Digit Dialing" on page 33.
• microSD™ Memory Card Slot. See "Using a microSD Memory Card in Your
Phone" on page 12.
• QWERTY keyboard. See "Creating and Sending Messages - Landscape
Mode" on page 127.
• Bluetooth
®
Wireless Technology. See "Bluetooth" on page 50.
• Menus and options that you can view in English or French. See "Language"
on page 121.
• EVDO 1x Technology
• Global Positioning (GPS) Technology
7 Getting Started
Turning Your Phone On and Off
(1'
(1'
To turn your phone on:
• Press and hold to turn your phone on.
Once your phone is On, it displays “Looking for Service” which indicates that your
phone is searching for a signal. When your phone finds a signal, it automatically
enters standby mode – the phone’s idle state. At this point, you are ready to begin
making and receiving calls.
If your phone is unable to find a signal after 15 minutes of searching, a Power
Save feature is automatically activated. When a signal is found, your phone
automatically returns to standby mode.
In Power Save mode, your phone searches for a signal periodically without your
intervention. You can also initiate a search for service by pressing any key (when
your phone is turned On).
Tip: The Power Save feature helps to conserve your battery power when you are in
an area where there is no signal.
(1'
Getting Started
To turn your phone off:
Your screen remains blank while your phone is off (unless the battery is charging).
(1'
• Press for two or more seconds until you see the powering down
animation on the display screen.
Using Your Phone’s Battery and Charger
Battery Capacity
Your phone is equipped with a Lithium Ion (LiIon) battery. It allows you to recharge
your battery before it is fully drained.
When the battery runs low, the battery icon will blink to remind you to recharge the
battery. When the battery capacity is close to completely drained, the phone
sounds an audible alert and then powers down.
Note: Long backlight settings, low signal strength, searching for service, vibrate
mode, playing games, or browser use affect the battery’s talk and standby times.
Getting Started 8
Tip: Be sure to watch your phone’s battery level indicator and charge the battery
before it runs out of power.
Installing the Battery
To install the LiIon battery:
1. Slide the battery cover down and lift up to remove it.
2. Insert the top end of the battery into the phone housing by using the
direction of the arrow printed on the battery. The gold contacts on the
top of the battery should match up with those on the phone.
3. Push the bottom end of the battery down until it snaps into place.
9 Getting Started
4. Slide the battery cover up until it snaps into place.
Removing the Battery
Note: Make sure the power is off so that you don’t lose any stored numbers or
messages.
To remove your battery:
1. Use your finger to lift the battery (bottom end first) up and away from
the phone.
2. Slide the battery cover up until it snaps into place.
Getting Started
Getting Started 10
Charging the Battery
Your phone’s LiIon battery is rechargeable and should be charged as soon as
possible so you can begin using your phone.
Keeping track of your battery’s charge is important. If your battery level becomes
too low, your phone automatically turns off and you will lose all the information you
were just working on. For a quick check of your phone’s battery level, glance at the
battery charge indicator located in the upper-right corner of either of your phone’s
display screens. indicates that the battery is full. If the battery charge is
getting too low, the battery icon blinks and the phone sounds a warning tone.
Always use a Samsung-approved desktop charger, travel adapter, or vehicle power
adapter to charge your battery.
WARNING! FOR CONNECTION TO AN ELECTRICAL SUPPLY NOT LOCATED IN
NORTH AMERICA, YOU MUST USE AN ADAPTER OF THE PROPER
CONFIGURATION FOR THE POWER OUTLET. USE OF THE WRONG ADAPTER
COULD DAMAGE YOUR PHONE AND VOID YOUR WARRANTY. IMPORTANT
SAFETY INSTRUCTIONS - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS. THIS POWER UNIT IS INTENDED
TO BE CORRECTLY ORIENTED IN A VERTICAL OR HORIZONTAL OR FLOOR
MOUNT POSITION.
Note: You must unplug the adapter before removing the battery from the phone
during charging to avoid damage.
11 Getting Started
Using the Travel Adapter
To use the travel adapter provided with your phone:
1. Locate the interface connector on the side of the phone and pull out
and turn the plastic cover (shown below).
2. Plug the terminal end of the adapter into the phone’s interface
connector, orienting the adapter’s gold contact pin upward.
3. Plug the other end into an electrical outlet.
4. An animated battery icon is displayed on both the external LCD screen
and the main screen. The icon provides an indication of whether the
battery is being charged or is fully charged.
Note: It takes approximately 4 hours to fully recharge a completely drained
standard battery. With the Samsung approved LiIon battery, you can recharge the
battery before it drains completely.
Using a microSD Memory Card in Your Phone
Your phone is capable of supporting a memory storage media known as a
microSDTM memory card. This card is the newest standard of flash memory
specifically designed for use with ultra-small mobile phones and other devices. It is
ideal for storing media-rich files such as music, videos, and photographs in your
phone.
The maximum storage size for this media card is 2 GB.
Getting Started
Note: Compatibility with all high capacity microSD memory cards is not
guaranteed.
Getting Started 12
Installing the microSD Memory Card
To install the card:
1. Locate the memory slot on the right side of the phone and pull out and
turn the plastic cover.
2. Orient the microSD’s gold contact pins upward.
3. Carefully insert the microSD card into the opening and firmly push it in
until you hear a click, which indicates that the card is now securely
installed.
Note: To remove the card once it has been inserted, firmly push the end of the card
further into the phone and release—the card should pop out of the memory card
slot. If this does not work, repeat the process again.
4. With the card now securely installed, resecure the plastic cover over the
microSD slot on the phone.
13 Getting Started
Phone Basics
(1'
MENU
Note: To access the phone’s main Menu, press from standby mode. Menu
items may be selected by highlighting them with the navigation key and
MENU
pressing .
OK
OK
Note: Your phone can display the various features and options in one of two
different menu styles, grid and list. By default, your handset is set to the grid (3x4
in Portrait mode and 3x3 in Landscape mode) menu style. Key commands for the
first menu level in the list style differ from those in this guide. For more information
on changing the menu style between grid and list, see "Changing the Phone’s Menu
Style" on page 36.
Displaying Your Phone Number
Just in case you forget your phone number, your phone can remind you.
To display your phone number:
MENU
1. Press , highlight the Settings menu, and press .
OK
MENU
OK
2. Select Phone Info.
3. Select Phone Number.
Making and Answering Calls
Making Calls
Placing a call from your phone is as easy as making a call from any land-line
phone. Just enter the number and press and you’re on your way to clear calls.
To make a call using your keypad:
1. Make sure your phone is on.
2. Enter a phone number. (If you make a mistake while dialing, press
to erase one digit at a time. Press and hold to erase the entire
number.)
3. Press to call.
4. Press or close the phone when you are finished.
TALK
(1'
TALK
BACK
BACK
Phone Basics
Phone Basics 14
Tip: To redial your last recent call, press twice.
(1'
Tip: Some networks support + dialing. + dialing automatically indicates to the
network that you are dialing an international call and adds the international dialing
prefix (typically ‘001’) to the call automatically. To use + dialing, press and hold the
0 key (until the + appears) before entering the phone number.
Note: In Landscape mode, you can only make calls using the speakerphone. For
more detailed procedures, see "Making Calls Using Contacts" on page 126.
You can also place calls from your phone by using Voice Command (page 28),
Speed Dialing numbers from your Contacts (page 19), and using your Call History
listings.
TALK
Answering Calls
To answer an incoming call:
1. Make sure your phone is on. (If your phone is off, incoming calls go to
Voicemail.)
2. Press to answer an incoming call. (Depending on your phone’s
Your phone notifies you of incoming calls in the following ways:
TALK
settings, you may also answer incoming calls by opening the flip cover
or by pressing any number key.)
• The phone rings or vibrates (unless set to Silence All).
• The screen displays an incoming call message.
If the incoming call is from a number stored in your Contacts, the Contacts entry’s
name is displayed. The caller’s phone number may also be displayed, if available.
The following options are also available to handle an incoming call:
(1'
• Press or the volume key to quiet the ringer.
• Press the right softkey for Ignore or press and hold the volume key to
send the incoming call to your Voicemail box immediately.
15 Phone Basics
Note: When your phone is off, incoming calls go to Voicemail.
(1'
Ending a Call
To disconnect a call when you are finished:
• Close the phone or press .
(1'
Missed Call Notification
When an incoming call is not answered, a Missed Call message is displayed on
your screen.
To dial a missed call back press .
Calling Emergency Numbers
You can place calls to 911 (dial 911 and press ), even if your phone is locked or
your account is restricted.
Warning: After initiating a 911 call, you must end the call by pressing * and # on
your keypad. This notifies the phone that the 911 call was terminated intentionally
by the user. No other calls can be made prior to terminating the emergency call.
TALK
TALK
In-Call Options
During a call, use the left softkey to Mute or UnMute your phone’s
microphone. Additional actions are available by pressing the right softkey for
Options during a call. (To select an option, press the corresponding keypad
number or highlight the option and press .)
MENU
OK
• (1) Key Mute or Key Unmute allows you to mute the key tones on your
phone so the other caller cannot hear you pressing any keys on your phone.
• (2) Contacts accesses the Contacts menu options.
• (3) Messaging allows you to check notifications and access the contents of
voice or text messages.
• (4) 3-Way Call allows you to talk to two different people at the same time.
(For more information, see "Making a Three-Way Call" on page 20.)
• (5) Call History checks your call log for Missed, Outgoing, Incoming and
Recent calls. You can also erase the logs from this menu.
• (6) Voice Memo allows you to record the current conversation. (For more
information on recording a voice memo, see "Voice Memo" on page 77.)
• (7) Tools accesses the Tools menu options.
Phone Basics
Phone Basics 16
• (8) Phone Info displays the phone number, icon glossary, the hardware/
software version, Preferred Roaming List (PRL), the system and the
technology being used.
End-of-Call Options
After receiving a call from or making a call to a phone number that is not in your
Contacts, the phone number and the duration of the call are displayed. Press the
left softkey to Save the new number in your Contacts. (See “Saving a Phone
Number” below for more information.)
Note: The End-of-Call options are not displayed for calls identified as Unknown ID
or Restricted Number.
Saving a Phone Number
Your phone can store up to 500 phone numbers in its Contacts list. Each Contacts
entry can store up to a total of five phone numbers, and each entry’s name can
contain up to 20 characters. (For more information, see "Adding a New Contact" on
page 100.)
To save a number from standby mode:
1. Enter a phone number.
2. Press the right softkey for Options.
3. Select Save.
MENU
4. Select New Entry and press .
OK
Note: Step 4 does not appear when your Contacts list is empty.
MENU
5. Select the Type using the navigation key and press .
OK
• Mobile• Home• Work
• Pager• Others
MENU
6. Enter the name using the keypad and press .
7. Press the left softkey for Done.
After you save the number, the new Contacts entry is displayed.
17 Phone Basics
OK
Finding a Phone Number
To find an entry from the Contacts menu:
1. From the Idle screen, press the right softkey for Contacts.
2. Scroll down through your list of contacts to highlight the name and
TALK
press to make the call.
Tip: To search through your list more quickly, enter the first few letters in the
Name box. The display will move down the list to the first entry that matches the
text in the Name box.
Dialing and Saving Phone Numbers With Pauses
You can dial or save phone numbers with pauses for use with automated systems,
such as Voicemail or credit card billing numbers.
There are two types of pauses available on your phone:
• Hard Pause sends the next set of numbers when you press .
TALK
• 2-Second Pause automatically sends the next set of numbers after two
seconds.
Note: You can have multiple pauses in a phone number and combine 2-second and
hard pauses.
To dial or save phone numbers with pauses:
1. Enter a phone number from standby mode.
2. Press the right softkey for Options and select Hard Pause or 2sec
Pause. Hard pauses are displayed as a “P” and 2-second pauses as a
“T”.
3. Enter additional numbers.
4. Press to dial the number.
TALK
— or—
Press the right softkey for Options and select Save to save the
number in your Contacts.
Phone Basics
When dialing a number with a hard pause, press to send the next set of
TALK
numbers.
Phone Basics 18
Abbrev. Dial
Abbreviated dialing allows you to program a five or six digit prefix for commonly
used phone numbers. When abbreviated dialing is on, you can enter the last four or
five digits of any phone number that matches the five or six digit prefix, and the
number is dialed.
To set up abbreviated dialing:
MENU
1. Press , highlight the Settings menu, and press .
OK
MENU
OK
2. Select Others.
3. Select Call Setup.
4. Select Abbrev. Dial.
MENU
5. Select On or Off and press .
6. Input the five or six digit prefix (for example, area code and prefix) and
MENU
OK
press .
OK
Making an Abbreviated Dial Call
1. Enter the last four or five digits of the prefix phone number. Abbrev. Dial
is displayed in the lower left corner with the prefix digits displayed.
Note: If there is more than one Contact entry that matches the last four or five
digits, a list is displayed which allows you to select the desired number to call.
2. Press to make the call.
TALK
Dialing From Contacts
To dial directly from a Contacts entry:
1. Press the right softkey for Contacts.
2. Scroll to highlight the desired entry and press to make the call.
TALK
Tip: If the entry contains more than one phone number, scroll left or right to display
the number you wish to call and press to make the call.
TALK
Using Speed Dialing
You can store up to 98 numbers in your phone’s speed dial memory to make
contacting friends and family as easy as pressing a few buttons. With this feature,
19 Phone Basics
you can dial Speed Dial entries using one key press for locations 2-9, or two key
presses for locations 10-99.
To use One-Touch Dialing for Speed Dial locations 2-9:
• Press and hold the appropriate key for approximately two seconds.
To use Two-Touch Dialing for Speed Dial locations 10-99:
1. Press the first digit.
2. Press and hold the second digit for approximately two seconds.
Using Caller ID
Caller ID allows people to identify a caller before answering the phone by
displaying the number of the incoming call. If you do not want your number
displayed when you make a call, just follow these easy steps.
To block your phone number from being displayed for a specific outgoing call:
1. Dial *67 on your keypad.
2. Enter the number you want to call.
3. Press .
To permanently block your number, call the Customer Service department of your
network service provider.
Responding to Call Waiting
When you’re on a call, Call Waiting alerts you of incoming calls by sounding two
beeps. Your phone’s screen informs you that another call is coming in and displays
the caller’s phone number (if it is available and you are in digital mode).
To respond to an incoming call while you’re on a call:
• Press . (This puts the first caller on hold and answers the second call.)
To switch back to the first caller:
• Press again.
Making a Three-Way Call
With Three-Way Calling, you can talk to two people at the same time. When using
this feature, the normal airtime rates will be charged for each of the two calls.
To make a Three-Way Call:
1. Enter a number you wish to call and press .
TALK
TALK
TALK
TALK
Phone Basics
Phone Basics 20
2. Once you have established the connection, press the right softkey
for Options and select 3-Way Call.
3. Dial the second number and press the left softkey .
4. When you’re connected to the second party, press again to begin
TALK
your three-way call.
If one of the people you called hangs up during your call, you and the remaining
caller stay connected. If you initiated the call and are the first to hang up, all three
callers are disconnected.
Tip: You can also begin a Three-Way Call by displaying a phone number stored in
your Contacts, Call History, or Messaging. To call the third party, press .
TALK
Note: Call Waiting and Three-Way Calling are not available while roaming off the
network.
21 Phone Basics
TTY Use With Handset
A TTY (also known as a TDD or Text Telephone), is a telecommunications device
that allows people who are deaf or hard of hearing, or who have speech or
language disabilities, to communicate by telephone.
Your phone is compatible with selected TTY devices. Please check with the
manufacturer of your TTY device to ensure that it supports digital wireless
transmission. Your phone and TTY device will connect via a special cable that
plugs into your phone's headset jack. If this cable was not provided with your TTY
device, contact your TTY device manufacturer to purchase the connector cable.
Note: Not all service providers support TTY. Consult your service provider for
more information.
Phone Basics
To turn TTY Mode on or off:
MENU
1. Dial ##889 on your keypad and press . (A brief explanation of TTY
OK
Mode will display.)
MENU
2. Press again to continue.
3. Press the navigation key up or down to select TTY On or TTY Off and
OK
MENU
OK
press to save and exit.
Note: In TTY Mode when your headset is plugged in, your phone will display the
TTY access icon. If TTY mode is enabled, the headset cannot be used.
IMPORTANT 911 Emergency Calling: We recommend that TTY users make
emergency calls by other means, including Telecommunications Relay Services
(TRS), analog cellular, and land line communications. Wireless TTY calls to 911
may be corrupted when received by public safety answering points (PSAPs)
rendering some communications unintelligible. The problem encountered appears
related to TTY equipment or software used by PSAPs. The wireless industry and
PSAP community are currently working to resolve this.
Phone Basics 22
Entering Text
Selecting a Character Input Mode
Your phone provides convenient ways to enter words, letters, punctuation,
symbols, and numbers whenever you are prompted to enter text (for example,
when adding a Contacts entry or when sending text messages).
To change the character input mode:
1. When you display a screen where you can enter text, press the right
softkey for Options. Soft key options are not displayed when
viewing existing messages.
2. Select a character input mode:
• T9 (English): to enter characters using predictive T9 Text Input (see
page 23).
• Alpha: to enter characters by tapping the keypad (see page 24).
• Symbol: to enter symbols (see page 25).
• Number: to enter numbers (see page 25).
• Preset Msg: to enter a pre-prepared message, chosen from a list of
common phrases.
• Recent Msg: to reuse the text from a recent message.
• Emoticons: to enter emoticon symbols.
• Text Options: to customize your character input mode.
Note: Not all character input modes may be available for all phone features. For
instance, Preset Msg and Recent Msg are only available when composing text and
picture messages.
T9 Text Input
T9 Text Input lets you enter text in your phone by pressing keys just once per letter.
(To select the T9 (English) mode when entering text, see “Selecting a Character
Input Mode” above.)
T9 Text Input analyzes the letters you enter using an intuitive word database and
creates a suitable word. (The word may change as you type.) Other possible words
appear in a list below your text.
• To choose a word displayed in the list, scroll up and down using the up and
down navigation keys.
23 Entering Text
Loading...
+ 124 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.