Samsung SHD-200C, SHD-300C User Manual
INSTALLATION MANUAL – SHD-200C / SHD-300C Corner Mount
Unpacking
Unpack carefully. This is mechanical equipment and should be
handled with care. If an item appears to have been damaged in
shipment, replace it properly in its carton and notify the shipper. If
any items are missing, notify Broadsight Systems, Inc. The shipping
carton is the safest container in which the unit may be transported.
Save it for possible future use.
Service
If the unit ever needs repair service, the customer should contact
Broadsight Systems, Inc. for a return materials authorization (RMA)
and shipping instructions.
Care and Maintenance
Perform routine maintenance to keep the unit dust free.
Model Designation
SHD-200C Large Corner Mount
SHD-300C Small Corner Mount
Description
The Corner Mount Camera Brackets are designed to allow a Samsung
Techwin miniature camera to be installed in the corner of a room.
Hardware Kit
2 x Screw, #10 x 1-1/4 Pan Head Phillips
2 x Wall Anchor
1 x Wrench, Torx Tamper Resistant
Tools Required
#2 Phillips Head Screwdriver
Certification
Camera installation should be performed by a licensed professional
and conform to the National Electrical Code (NEC) and any applicable
local codes.
Installation
1. Remove cover by removing two (2) tamper resistant screws
using wrench provided. Set cover aside.
2. Use corner mount backbox as a template to mark installation
hole locations. Drill surface using appropriate sized drill bit.
Fasteners provided in kit are not ideal for all installation types.
3. Drill hole for cable entry into backbox. Route cables/camera
into backbox and attach power/data cable(s).
4. Use appropriate wall anchors and screws to attach backbox to
installation surface.
5. Orient camera as needed to achieve desired field of view.
6. Replace cover to complete installation.
Figure 1 - SHD-300C Small Corner Mount
Figure 2 - SHD-200C Large Corner Mount
Made in the USA by Broadsight Systems, Inc. for Samsung Techwin Page 1 of 2
3.7”
95mm
3.6”
92mm
3.4”
86mm
2.0”
51mm
3.6”
92mm
SHD-300C
Dimensional Drawing
SHD-200C
Dimensional Drawing
4.4”
112mm
6.0”
152mm
8.4”
213mm
6.0”
152mm
6.0”
152mm
Made in the USA by Broadsight Systems, Inc. for Samsung Techwin Page 2 of 2
Loading...