Samsung SHC-750 User Manual

Ultimate

Sensitivity

SALES NETWORK

•

SAMSUNG TECHWIN CO., LTD.

145-3, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si,
Gyeonggi-do 462-703, Korea
TEL : [phone]~8139 FAX : [phone]

•

SAMSUNG OPTO-ELECTRONICS UK, LTD.

Samsung House, 1000 Hillswood Drive, Hillswood Business
Park Chertsey, Surrey KT16 OPS
TEL : [phone] FAX : [phone]

www.samsungtechwin.com
www.samsungcctv.com

•

TIANJIN SAMSUNG OPTO-ELECTRONICS CO., LTD.

7 Pingchang Rd, Nankai Dist. Tianjin 300190, P.R China
TEL : [phone](33821) FAX : [phone]

P/No. : Z6806-0762-01B

VAN 06. 09

Extreme Low Light Camera SHC-750 User’s Manual

Thank you for purchasing a SAMSUNG CCD CAMERA.
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.

ENGLISH

The lightning flash with an arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.

INFORMATION-This equipment has been tested and found to comply with limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.

WARNING -Changes or modifications not expressly approved by the manufacturer
could void the user’s authority to operate the equipment.

CAUTION : To prevent electric shock and risk of fire hazards:

Do NOT use power sources other than that specified.
Do NOT expose this appliance to rain or moisture.

This installation should be made by a qualified service person and

should conform to all local codes.

Major Functions and Features

EMCCD for Extreme Light
Sensitivity

A 1/2 inch Electron Multiplying Charge
Coupled Device (EMCCD) and advanced
digital signal processing technology are
employed to produce sharper shapes and
colors in the subject image, even under
ultra low light conditions. This is suitable
for 24-hour outdoor surveillance where
available light levels can get extremely low.

-Color: 0.008Lux (F1.2, EIAJ)

-B/W: 0.0005Lux (F1.2, EIAJ)

SHC-750 DSP

The high performance DSP capability of the
SHC-750 effectively eliminates low light
noise and produces not only clearer images
but also sharper colors. The resulting
image is vivid and precise.

Day & Night

It automatically distinguishes between day
and night, and switches to the appropriate
mode. Color mode is used during the day
to produce optimum color images; B/W
mode is used at night to deliver clearer
images in the dark.

Motion Detection

The product’s Motion Detection feature detects
moving subjects and generates a signal
accordingly. An alarm device may be connected
directly (i.e. with no external sensor) to the
product for more effective security.

Video-Drive/DC-Drive Lens
Support

Video-drive lens or DC-drive lens selection
is by a simple switch control. The
brightness of the video lens can be
adjusted without fine VR adjustments.

Samsung Super Noise Reduction
(SSNR)

Samsung original SSNR technology effectively
eliminates low light noise, increases horizontal
resolution, and improves the S/N ratio.
The resulting image is clear and vivid even in
low light conditions.

On-Screen Text Display & RS-485
Communication Technology

Camera functions may be controlled using
the on-screen text displays.
RS-485 communication technology enables
long-distance remote control of the camera
functions.

Extra Features

Extra features include Sens-Up, Privacy,
Sharpness, Smear Cancel, and Mirror.

Samsung Techwin cares for the environment at all product manufacturing
stages to preserve the environment, and is taking a number of steps to
provide customers with more environment-friendly products.The Eco mark
represents Samsung Techwin s will to create environment-friendly products,
and indicates that the product satisfies the EU RoHS Directive.

Warnings & Cautions

This information is provided to ensure your safety and to prevent any losses, financial or
otherwise. Please read it carefully and use the product accordingly.

Warning/Attention/Special Mark Messages

Ignoring this information may result in material loss and/or serious
personal injuries including death.

Indicates “Never Allowed.”

Indicates “No Disassembling.”

Indicates

Must Observe.

Contents

Precautions

Product Components

Names and Functions of Each Part

• Front

• Bottom

• Back

Instructions: Setup

• Lens
Using Auto Iris Lenses
Using C/CS Mount Lenses

Instructions: Connection

• Connecting a Monitor

• Connecting the Power

8

10

11
11

12
13

14
14

Instructions: Camera Operation

• Menu Functions

• Function Settings
CAMERA ID
BACKLIGHT
WHITE BAL
MOTION DET
LENS SELECTION
SHUTTER
AUTO GAIN CONTROL
SENS-UP
SSNR
SPECIAL

Remote Control / MD Output / D&N Input
Problems & Solutions

18
18

19

Product Specification
Protocol Command Description

20
20

21
22
24
26

27
28
29
30

30
32
33

35
36
37

38

Precautions

Installation of this product by unqualified
personnel is strictly prohibited.

Experience and technical know-how are required
for proper installation, and to prevent possible fire
or electric shock. Please consult an authorized
retailer for any installation questions.

Do not install the product in an area of high humidity
or near flammable materials (e.g. oil or gas).

Using the product in an incorrect environment may
cause fire, electric shock, or damage to the product.

Do not handle power plugs with
wet hands.

It may cause electric shock.

If the camera overheats or smoke is
noticed, turn the power off immediately.

It may cause fire.

Do not install the product unless the location
can fully support the product’s weight.

If it is not properly supported, the product may fall.

Do not insert foreign objects into the
product or disassemble the product.

It may cause fire or damage the product.

Do not expose the product to extreme
heat or cold.

Do not expose the product to extreme heat or cold. Temperatures outside
its operating temperature range (-10˚C(14˚F) ~ 50˚C(122˚F)) may reduce
image quality or cause product malfunction. Pay special attention to
ventilation around the product in warm locations.

Do not drop, shake, or apply severe
impact to the product.

It may damage the product. Excessive light may cause fatal damage to the CCD.

Do not touch the glass on the front of
the camera.

This is the most important part of the camera. Be careful
not to leave any marks, including fingerprints, on the glass.

Do not use the product in areas where the
illumination levels fluctuate frequently.

Fluctuating light levels caused by an unstable
fluorescent lamp, for example, may cause product
malfunction.

Do not point the camera towards a
strong light source such as the sun.

Do not expose the product to rain or water,
or place it near radioactive materials.

Water inside the camera may cause product
malfunction.

COLOR CCD CAMERACOLOR CCD CAMERA User’s ManualUser’s Manual

98

Product Components

1. 1/2 inch Ultra Low Light EM CCD
SHC-750N Color Camera

2. Connector Plug for Auto Iris Lens

3. Remote Connector Plug

Names and Functions of Each Part

Front

4. C-mount Adapter

5. User Manual

6. DC 12V/4A Adapter

Groove for Tripod Mount

Used to secure the camera case on a tripod mount:
loosen the screws located on the bottom of the tripod and secure the camera to it.

C-mount Lens Adapter

Used for mounting a C-mount lens.

Back Focus Control Screw

Adjusts back focus

Auto Iris Lens Connector

Connector port for auto iris lens

COLOR CCD CAMERACOLOR CCD CAMERA User’s ManualUser’s Manual

1110

Names and Functions of Each Part

L

Bottom Back

Groove for Tripod Mount

Used to mount the camera on a bracket or a tripod
The size of the screws for this groove is as follows.
(ISO standard)

The Tripod anchor can be relocated to the top or the
bottom. Always use the screws provided to secure the
camera. Otherwise, mounting may not be properly
secure or internal damage might occur.

1/4"-20 UNC (20 THREAD)
L:4.5mm±0.2mm (ISO standard),
or 0.197" (ASA standard)

Function Buttons

Set button: For displaying the menu screen. Press to confirm selections or changes made.
Up/Down button: For moving the screen cursor up/down to select menu items
Left/Right button: For moving the screen cursor left/right to change selected item values

Power Lamp

The lamp turns on when the power is properly connected.

D&N Input / MD Output Port

For external signal input to enable Day&Night mode filter control
For motion detection signal output to help improve security effectiveness

Power Input Connector

Connect the adapter provided with this product here; be sure to match the +/- of the port

Remote Port

Connect external devices here to control the 5 function-setting buttons remotely

COLOR CCD CAMERACOLOR CCD CAMERA User’s ManualUser’s Manual

1312