Samsung SGH-X828, X828 SILVERISH PINK User Manual

Page 1

X828.book Page 1 Monday, July 3, 2006 3:50 PM

Depending on the software installed or your service provider or country, some of the descriptions in this guide may not match your phone exactly.

* Depending on your country, your phone and accessories may appear

different from the illustrations in this guide.

World Wide Web http://www.samsungmobile.com

Printed in Korea

Code No.:GH68-09999A

English. 07/2006. Rev. 1.1

Page 2

X828.book Page 2 Monday, July 3, 2006 3:50 PM

SGH-X828 User’s Guide

Page 3

X828.book Page 3 Monday, July 3, 2006 3:50 PM

Important

safety

precautions

Failure to comply with the following precautions may be dangerous or illegal.

Drive safely at all times

Do not use a hand-held phone while driving. Park the vehicle first.

Switch off the phone when refuelling

Do not use the phone at a refuelling point (service station) or near fuels or chemicals.

Switch off in an aircraft

Wireless phones can cause interference. Using them in an aircraft is both illegal and dangerous.

Switch off the phone near all medical equipment

Hospitals or health care facilities may be using equipment that could be sensitive to external radio frequency energy. Follow any regulations or rules in force.

Interference

All wireless phones may be subject to interference, which could affect their performance.

Page 4

X828.book Page 1 Monday, July 3, 2006 3:50 PM

Be aware of special regulations

Meet any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger.

Water resistance

Your phone is not water-resistant. Keep it dry.

Sensible use

Use only in the normal position (held to the ear). Avoid unnecessary contact with the antenna when the phone is switched on.

Emergency calls

Key in the emergency number for your present location, then press .

Keep your phone away from small children

Keep the phone and all its parts, including accessories, out of the reach of small children.

Accessories and batteries

Use only Samsung-approved batteries and accessories, such as headsets and PC data cables. Use of any unauthorised accessories could damage you or your phone and may be dangerous.

• The phone could explode if the battery is replaced with an incorrect type.

• Dispose of used batteries according to the manufacturer’s instructions.

At very high volumes, prolonged listening to a headset can damage your hearing.

Use of authorised software

Use only Samsung-authorised software. The use of any unauthorised software could damage your phone.

Qualified service

Only qualified service personnel may repair your phone.

For more detailed safety information, see "Health and safety information" on page 94.

Important safety precautions

Page 5

X828.book Page 2 Monday, July 3, 2006 3:50 PM

About this Guide

This User’s Guide provides you with condensed information about how to use your phone. To quickly learn the basics for your phone, please refer to “Get started” and “Step outside the phone.”

In this guide, the following instruction icons appear:

Indicates that you need to pay careful attention to the subsequent information regarding safety or phone features.



[ ]

< >

Indicates that you can get more information on the referenced page.

Indicates that you need to press the

→

Navigation keys to scroll to the specified option and then select it.

Indicates a key on the phone. For example, [ ].

Indicates a soft key, whose function is displayed on the phone screen. For example, <

• Camera and camcorder

Special

• Music player

•Bluetooth

Use the camera module on your phone to take a photo or record a video.

features of your phone

Play files using your phone as a music player.

Transfer media files and personal data and connect to other devices using free, wireless Bluetooth technology.

Page 6

X828.book Page 3 Monday, July 3, 2006 3:50 PM

• Photo printing

Print your photos to preserve your best moments forever.

• Phone to TV

View photos and video clips captured with the phone on your TV screen.

• Image editor

Crop, resize, rotate, and decorate your photos.

• File viewer

Open documents in various formats on the phone without corruption.

•Web browser

Access the wireless web to get up-to-the-minute information and a wide variety of media content.

•Java

Enjoy Java™-based embedded games and download new games.

• Offline mode

Switch your phone to offline to use its non-wireless functions in an airplane.

• Multimedia Message Service (MMS)

Send and receive MMS messages with a combination of text, image, video, and audio.

•E-mail

Send and receive e-mails with image, video, and audio attachments.

Special features of your phone

Page 7

X828.book Page 4 Monday, July 3, 2006 3:50 PM

Contents

Unpack 6

Make sure you have each item

Your phone 6

Keys, features, and locations

Get started 7

First steps to operating your phone

Install and charge the phone ...................... 7

Power on or off......................................... 8

Keys and display ...................................... 9

Access menu functions ............................ 11

Customise your phone............................. 12

Make/Answer calls .................................. 14

Step outside the phone 15

Begin with your camera, the music player, the web, and other special features

Use the camera ...................................... 15

Play music ............................................. 16

Browse the web...................................... 17

Use Phonebook ....................................... 18

Send messages....................................... 19

View messages ....................................... 21

Use Bluetooth ......................................... 22

Watch the phone display on a TV............... 23

Enter text 25

Chinese Phrasal Pinyin, Chinese Stroke, English word, ABC, Number, and Symbol modes

Call functions 30

Advanced calling features

Menu functions 34

All menu options listed

Solve problems 92

Help and personal needs

Health and safety information 94

Page 8

X828.book Page 5 Monday, July 3, 2006 3:50 PM

Overview of menu functions

To access Menu mode, press <

1 Call log

1 Recent contacts 2 Missed calls 3 Dialled calls 4 Received calls 5 Delete all 6 Call time 7 Call costs

2 Phonebook

1 Contact list 2 Create contact 3 Group 4 Speed dial 5 My namecard 6 Own number 7 Management 8 Service number 9 Information number

3 Applications

1 Music player 2 Voice recorder 3 Image editor 4 Java world 5 World clock

> in Idle mode.



p. 34



p. 34



p. 34



p. 34



p. 34



p. 35



p. 35



p. 35



p. 36



p. 36



p. 37



p. 37



p. 38



p. 38



p. 39



p. 39



p. 39



p. 39



p. 40



p. 40



p. 42



p. 43



p. 45



p. 46

3 Applications

6 Alarm 7 Calculator 8 Converter 9 Timer 10 Stopwatch 11 Key management 12 SIM AT

4 Browser

1 Home 2 SFC home 3 Enter URL 4 Bookmarks 5 Saved pages 6 History 7 Clear cache 8 Browser settings

5 Messages

1 Create message 2 My messages 3 Templates 4 Delete all 5 Settings 6 Memory status

(continued)

6 My files



p. 46



p. 47



p. 47



p. 47



p. 48



p. 48



p. 48



p. 49



p. 49



p. 50



p. 51



p. 51



p. 52



p. 52



p. 52



p. 52



p. 52



p. 52



p. 56



p. 60



p. 61



p. 61



p. 66

1 Images 2 Videos 3 Music 4 Sounds 5 Other files 6 Memory status

7 Calendar

8 Camera

9 Settings

1 Time and date 2 Phone settings 3 Display settings 4 Sound settings 5 Light settings 6 Network services 7 Bluetooth 8 Security 9 Connection settings 10 Reset settings

* Shows only if supported by your SIM

card.



p. 66



p. 67



p. 68



p. 69



p. 69



p. 70



p. 72



p. 72



p. 75



p. 80



p. 81



p. 81



p. 82



p. 83



p. 84



p. 85



p. 87



p. 89



p. 90



p. 92

Page 9

X828.book Page 6 Monday, July 3, 2006 3:50 PM

Unpack

Make sure you have each item

Phone

Battery

You can obtain various accessories from your local Samsung dealer.

• The items supplied with your phone and accessories available at your Samsung dealer may vary, depending on your country or service provider.

• Use the purchased accessories with only Samsung-authorised devices. The use of these accessories with other devices could cause problems and any repair costs would not be covered by the warranty.

Travel Adapter

User’s Guide

You r p ho ne

Keys, features, and locations

Earpiece

Volume ke ys

Display

Web access/ Confirm key

Left soft key

Dial key

Alphanumeric

keys

Special

function keys

Camera lens

Headset jack

Camera key

Navigation keys (Up/Down/ Left/Right)

Right soft key

Power on/off/ Menu exit key

Delete key

Microphone

Page 10

X828.book Page 7 Monday, July 3, 2006 3:50 PM

Get started

First steps to operating your phone

SIM card information

When you subscribe to a cellular network, you receive a plug-in SIM (Subscriber Identity Module) card loaded with your subscription details, such as your PIN, and available optional services.

Install and charge the phone

Remove the battery cover.

If the phone is already on, first turn it off by pressing and holding [ ].

Insert the SIM card.

Make sure that the gold-coloured contacts on the card face down.

Install the battery.

Reattach the battery cover.

Plug the travel adapter into the phone.

Plug the adapter into a standard AC wall outlet.

Page 11

X828.book Page 8 Monday, July 3, 2006 3:50 PM

Get started

When the phone is completely charged (the battery icon becomes still), unplug the adapter from the power outlet.

Remove the adapter from the phone.

Low battery indicator

When the battery is low:

• a warning tone sounds,

• the low battery message displays, and

• the empty battery icon blinks.

If the battery level becomes too low, the phone automatically turns off. Recharge your battery.

Power on or off

Switch on

Do not turn on the phone when mobile phone use is prohibited.

Switch off

Keypad lock

You can lock the keypad to prevent accidental presses from affecting phone operations.

In Idle mode, press and hold [ ] and press <

Yes

>. To unlock the keypad, press the left

soft key and then [ ].

You can also set the phone to lock the keypad automatically.

1. Press and hold [ ].

2. If necessary, enter the PIN and press <OK>.

1. Press and hold [ ].

Page 12

X828.book Page 9 Monday, July 3, 2006 3:50 PM

Offline mode

You can switch the phone to Offline mode, in which the phone functions requiring network connection are deactivated. This mode is helpful when you want to use your phone in a place where you are not allowed to use mobile devices, such as in an airplane and at a hospital.

To switch to Offline mode, press < and select

Settings →

Phone settings →

Offline mode → On.

In Offline mode, you can use non-wireless functions, such as games, calendar, camera, and music player.

Keys and display

Keys

Perform the function indicated on the bottom line of the display.

In Idle mode, access your favourite menus directly.

In Menu mode, scroll through menu options.

In Idle mode, launch the web browser.

In Menu mode, select the highlighted menu option or confirm input.

Make or answer a call. In Idle mode, retrieve the recent

numbers dialled, missed, or received.

Delete characters from the display or an item in an application.

Get started



p. 81

Page 13

X828.book Page 10 Monday, July 3, 2006 3:50 PM

Get started

End a call. Press and hold to switch the

phone on or off. In Menu mode, cancel input and

return the phone to Idle mode.

Enter numbers, letters, and some special characters.

In Idle mode, press and hold to access your voicemail server. Press and hold [ international call prefix.

] to enter an

[1]

Enter special characters. In Idle mode, press and hold [ ]

to activate or deactivate Silent mode. Press and hold [ ] to enter a pause between numbers.

Adjust the phone volume. In Idle mode, adjust the keypad

tone volume.

In Idle mode, press and hold to turn on the camera.

In Camera mode, take a photo or record a video.

Display

Layout

Menu Contacts

Icons

Received signal strength

Icons

display various icons.

Text and graphics

display messages, instructions, and information you enter.

Soft key function indicators

show the current functions assigned to the soft keys.

GPRS network

Connecting to GPRS

network

Transferring data in GPRS

network

Call in progress

Out of your service area;

you cannot make or receive calls

Roaming network

Page 14

X828.book Page 11 Monday, July 3, 2006 3:50 PM

New message

New e-mail

New voicemail

Call diverting feature active



p. 85

Home Zone, if registered for

the appropriate service

Office Zone, if registered for

the appropriate service

Connected to Bluetooth

hands-free

car kit or

headset



Bluetooth active

p. 87

MP3 playback in progress

MP3 playback paused

Alarm set



p. 46

Call ringer set to vibrate



p. 83

Silent mode (Vibration)

Silent mode (Mute)

Mute mode, during a call

Battery power level

* Depending on your country or service provider,

the icons shown on the display may vary.

Access menu functions

Use the soft keys

The roles of the soft keys vary depending on the function you are using. The bottom line of the display indicates their current role.

Select Back

Press the left soft key to select the highlighted option.

Press the right soft key to return to the previous menu level.

Get started

Page 15

X828.book Page 12 Monday, July 3, 2006 3:50 PM

Get started

Select an option

Use shortcuts

1. Press the appropriate soft key.

2. Press the Navigation keys to move to the next or previous option.

3. Press <

4. To exit, choose either of

Press the number key corresponding to the option you want. For the index numbers 10, 11 and 12, press [0], [ ], and [ ], respectively.

Select

Back

>, or

> to

[ ] to confirm the function displayed or option highlighted.

the following methods:

• Press <

move up one level.

• Press [ ] to return

to Idle mode.

Customise your phone

Display language

Call ringer melody

1. In Idle mode, press <

> and select

Settings → Phone settings → Language → Language

2. Select a language.

1. In Idle mode, press <

> and select

Settings → Sound settings → Incoming call → Ringtone

2. Select a ringtone category.

3. Select a ringtone.

4. Press <

Save

Page 16

X828.book Page 13 Monday, July 3, 2006 3:50 PM

Idle mode wallpaper

Menu mode skin colour

You can set wallpaper for the idle screen on the display.

1. In Idle mode, press <

> and select

Settings → Display settings → Wallpaper → Wallpaper image

2. Select an image or a video clip category.

3. Select an image or a video clip.

4. Press <

You can change the colour for the display components, such as title bars and highlight bars.

1. In Idle mode, press

2. Select a colour pattern.

Save

> and select

Settings → Display settings → Skin

Menu shortcuts

Silent mode

You can set the Navigation keys to function as shortcuts to access your favourite menus.

1. In Idle mode, press <

> and select

Settings → Phone settings → Shortcuts

2. Select a key.

3. Select a menu to be assigned to the key.

You can switch the phone to Silent mode to avoid disturbing other people.

Press and hold [ ] in Idle mode.

Get started

Page 17

X828.book Page 14 Monday, July 3, 2006 3:50 PM

Get started

Phone lock

You can protect the phone against unauthorised use with a phone password. The phone will require the password on power-up.

1. In Idle mode, press <

> and select

Settings → Security → Change password

2. Enter the default password, and press <OK>.

3. Enter a new 4- to 8-digit password and press <OK>.

4. Enter the new password again and press <OK>.

5. Select

6. Select

7. Enter the password and press <OK>.

00000000

Phone lock

Enable

Make/Answer calls

Make a call

Answer a call

Adjust the volume during a call

1. In Idle mode, enter an area code and phone number.

2. Press [ ].

3. To end the call, press [].

1. When the phone rings, press [ ].

2. To end the call, press [].

Press [Volume].

Page 18

X828.book Page 15 Monday, July 3, 2006 3:50 PM

Step outside the phone

Begin with your camera, the music player, the web, and other special features

Use the camera

Take a photo

1. In Idle mode, press and hold [] to turn on the camera.

2. Aim the lens at the subject and make any desired adjustments.

3. Press [ ] or [] to take a photo. The photo is saved automatically.

4. Press [ ] or <

Preview

another photo.

> to take

View a photo

Record a video

1. In Idle mode, press <

> and select

files → Images → My photos

2. Select the photo you want.

1. In Idle mode, press and hold [ ] to turn on the camera.

2. Press [1] to switch to Record mode.

3. Press [ ] or [] to start recording.

4. Press [ ], < > or [] to stop recording. The video is saved automatically.

5. Press <

Preview

record another video.

> to

Page 19

X828.book Page 16 Monday, July 3, 2006 3:50 PM

Step outside the phone

Play a video

Play music

Copy music files to the phone

1. In Idle mode, press <

> and select

files → Videos → My video clips

2. Select the video you want.

Use these methods:

• Download from the wireless webp. 49

• Download from a computer using the optional Samsung PC StudioSamsung PC Studio User’s Guide

• Receive via Bluetooth



p. 89

Create a play list

1. In Idle mode, press <

> and select

Applications → Music player

2. Press <

3. For

4. Press <

Options

select

Add to playlist →

Add all

Add files

[ ] to select the files you want and press <

Select

Back

to the MP3 player screen.

> and

Add files

, press

> to return

Page 20

X828.book Page 17 Monday, July 3, 2006 3:50 PM

Play music files

1. From the MP3 player screen, press [ ].

2. During playback, use the following keys:

•: pauses or

resumes playback.

• Left: returns to the

previous file.

• Right: skips to the

next file.

• Up: opens the play

list.

• Volume: adjusts the

volume.

• Down: stops

playback.

Browse the web

Using a built-in web browser, you can easily access the wireless web to get a variety of up-to-date services and information and to download web content.

Launch the web browser

Navigate the web

In Idle mode, press [ ] and select

• To scroll through browser

• To select an item, press

• To return to the previous

• To move to the next page,

• To access options, press

Home

items, press [Up] or [Down].

[].

page, press <

press < select Go →

Options

Back

Options

Forward

> and

Step outside the phone

Page 21

X828.book Page 18 Monday, July 3, 2006 3:50 PM

Step outside the phone

Use Phonebook

Add an entry

To the phone’s memory:

1. In Idle mode, enter a

2. Select

3. Specify contact

4. Press <

phone number and press <

Options

Phone →

information: Last name, First name, Mobile, Home, Office, Fax, Other, Email, Caller ID, Ringtone, Group, and Note.

the entry.

Save contact →

a number type.

Save

> to save

Find an entry

To t h e S IM c ar d :

1. In Idle mode, enter a phone number and press <

Options

2. Select

SIM

3. Enter a name.

4. Press < the entry.

1. In Idle mode, press <

Contacts

2. Enter the first few letters of the name you want.

3. Select an entry.

4. Scroll to a number and press press [ ] to edit contact information.

Save contact →

Save

> to save

[]

to dial, or

Page 22

X828.book Page 19 Monday, July 3, 2006 3:50 PM

Create and send a name card

1. In Idle mode, press <

Menu Phonebook → namecard

2. Specify your contact information.

3. Press < the name card.

4. To send the name card, press < select sending method.

Send messages

Send a text message (SMS)

1. In Idle mode, press <

Menu Messages → Create message → message

2. Enter the message text.

> and select

Save

> to save

Options

Send via → a

> and select

> and

Text

Send a text message (SMS)

(continued)

Send a multimedia message (MMS)

3. Press <

4. Enter destination

5. Press [ ] to send the

1. In Idle mode, press

2. Select

3. Enter the message

4. Select

Options

select

Save and send

Send only

numbers.

message.

> and select

Messages → Create message → message

Subject

subject and press [ ].

Image and video

Sound

> and

Multimedia

Step outside the phone

Page 23

X828.book Page 20 Monday, July 3, 2006 3:50 PM

Step outside the phone

5. For

Image and video

select

Add image

video

and add an image

or video clip. For

Sound

sound

clip.

6. Select

7. Enter the message text and press [ ].

8. Press < select

9. Enter destination numbers or addresses.

10. Press [ ] to send the message.

, select

and add a sound

Message

Options

Send

Add

> and

Add

Send an e-mail

1. In Idle mode, press <

Menu> Messages → Create message →

2. Select

3. Enter the e-mail subject and press [ ].

4. Select

5. Enter the e-mail text and press [ ].

6. Select

7. Add image, video, sound, music files, or document files.

8. Press < select

9. Enter e-mail addresses.

10. Press [ ] to send the e-mail.

and select

Subject

Message

File attached

Send

Options

> and

Page 24

X828.book Page 21 Monday, July 3, 2006 3:50 PM

View messages

View a text message

View a multimedia message

When a notification appears:

1. Press <

2. Select the message from the Inbox.

From the Inbox:

1. In Idle mode, press <

Messages → My messages → Inbox

2. Select an SMS message ().

When a notification appears:

1. Press <

2. Press < select

3. Select the message from the Inbox.

Retrieve

View

> and select

View

Options

> and

View a multimedia message

(continued)

View an

e-mail

From the Inbox:

1. In Idle mode, press <

> and select

Messages → My messages → Inbox

2. Select an MMS message ().

1. In Idle mode, press <

> and select

Messages → My messages → inbox

2. Select an account.

3. Press <

4. Select an e-mail or a

5. If you selected a header,

Yes

new e-mails or headers.

header.

press < select the body of the e-mail.

> to download

Options

Retrieve

> and

to view

Step outside the phone

Page 25

X828.book Page 22 Monday, July 3, 2006 3:50 PM

Step outside the phone

Use Bluetooth

Your phone is equipped with Bluetooth technology, enabling you to connect the phone wirelessly to other Bluetooth devices and exchange data with them, talk handsfree, or control the phone remotely.

Turn on Bluetooth

1. In Idle mode, press <

> and select

Settings → Bluetooth → Activation → On

2. Select

My phone’s

visibility → On

other devices to find your phone.

to allow

Search for and pair with a Bluetooth device

1. In Idle mode, press <

> and select

Settings → Bluetooth → My devices → for new devices

2. Select a device.

3. Enter a Bluetooth PIN or the other device’s Bluetooth PIN, if it has one, and press <OK>.

When the owner of the other device enters the same code, pairing is complete.

Page 26

X828.book Page 23 Monday, July 3, 2006 3:50 PM

Send data

Receive data

1. Access an application,

Phonebook, My files Calendar

2. Scroll to an item.

3. Press < select

Bluetooth

4. Select a device.

5. If necessary, enter the Bluetooth PIN and press <OK>.

To receive data via Bluetooth, your phone’s Bluetooth feature must be active.

1. When a device attempts to access your phone, press < connection.

2. If necessary, press < you are willing to receive.

Options

Send via →

Yes

> to permit

Yes

> to confirm that

, or

> and

Watch the phone display on a TV

You can view the display of your phone on a TV screen by connecting the phone and TV with a TV out cable. This enables you to enjoy the photos, videos and music stored in the phone’s memory with your family or friends on a larger screen.

Important TV information

• Depending on your particular TV model, the location and shape of the video input and audio output ports may vary. Match cable connector and TV port colours.

• Depending on the video system, the image may vibrate or in some other way be less than optimal.

• Depending on the video quality, some video clips may not display.

• You cannot use a Bluetooth stereo headset or the zooming feature in TV Out mode.

Step outside the phone

Page 27

X828.book Page 24 Monday, July 3, 2006 3:50 PM

Step outside the phone

Transfer phone display to a TV

1. With the TV switched on, connect your phone to the TV with a TV out cable, as shown.

2. Switch the TV to External Input mode.

The display switches to TV Out mode and you can view the phone’s display on the TV screen.

3. If necessary, set the video system for your TV in the

TV-out settings

menu.p. 83

4. Access the application you want and open files.

Page 28

X828.book Page 25 Monday, July 3, 2006 3:50 PM

Enter text

Chinese Phrasal Pinyin, Chinese Stroke, English word, ABC, Number, and Symbol modes

You can enter text for some features, such as Messages, Phonebook, or Calendar, by using Phrasal Pinyin, and Stroke modes for Chinese, and English word and ABC modes for English. You can also enter numbers and symbols.

Changing the text input mode

• Press the right soft key and select the text input mode you want.

Phrasal Pinyin ()

T Stroke ( ) Number ( )

Symbol (No indicator)

ABC ( )

• Press and hold [ ] to quickly switch to Symbol mode.

Phrasal S Stroke ()

English word ( )

Using Chinese Phrasal Pinyin mode

Pinyin is a system to enter Chinese words by spelling them phonetically (how they sound) using the Latin alphabet. With the Pinyin input method, you can enter Chinese characters by entering the Pinyin string using the phone’s keypad.

Your phone provides you with Phrasal Text Input (PTI) mode, an advanced Pinyin mode which predicts not only words, but phrases for your key presses. Using PTI mode, you can also add new words or phrases to the PTI dictionary.

Entering characters in Pinyin mode

1. Press the keys corresponding to the phonetic spelling, referring to the letters printed on the keys.

Example

[4] to enter ni.

2. Press [Left] or [Right] to select alternative pinyins for the keys you have pressed.

: To enter , press [6] and

Page 29

X828.book Page 26 Monday, July 3, 2006 3:50 PM

Enter text

3. If you cannot find the character you want from the display, press [Up] or [Down] to scroll through the word choices.

4. Press [1] to activate the character selection field. A number, from 1 to 5, is added to each character.

5. Press the number key corresponding to the character you want.

Rapid character entry

To enter the word zhong guo (), enter the first character using the following keystrokes; [9], [4], [6], [6], [1], and [1]. You do not have to complete the Pinyin spelling to include guo (). The character displays automatically.

Tips for using Pinyin mode

• Press [ ] to insert a space.

• Press and hold [ ] to start a new line.

• Press [Left] or [Right] to move the cursor.

•Press [C] to clear letters one by one. Press and hold [C] to clear the entire display.

Adding words or phrases to the PTI dictionary

Once you have assigned words or phrases to the PTI dictionary, the words or phrases will be the first choices for the corresponding key presses.

1. Press <

2. Enter the word or the phrase you want

3. Press the number key corresponding to

4. Press <OK> to add the word or the

Options

phrases

you want to the PTI dictionary.

and press [1] to activate the character selection field.

the word or phrase you want.

phrase to the PTI dictionary, and it is inserted into your text automatically.

> and select

to add the word or the phrase

Add new

Using Chinese Stroke mode

This mode allows you to enter individual Chinese strokes, in written order, from top to bottom, and from left to right.

Page 30

X828.book Page 27 Monday, July 3, 2006 3:50 PM

The Chinese strokes are classified into five basic categories; heng, shu, pie, dian, and zhe. The basic strokes are printed on keys [1] to [5] on the keypad.

Refer to the following table:

Category Key Strokes represented in each category

Entering strokes and characters in Stroke mode

1. Press the keys that correspond to a character’s component strokes. Press keys in the order that you would write the strokes, using one press per stroke.

Example

: To enter , press [5] to

enter and [3] to enter .

If you are uncertain of the stroke order, press [ questionable stroke. Continue entering strokes until the character displays or until you finish the character.

] in place of each

2. Press [Up] or [Down] to scroll through the choices.

3. To select a character and add it to your message, press the corresponding key, [7] to [0].

Rapid character entry

Try entering the characters zhong guo () using the following keystrokes: [2], [8], and [7]. Even though zhong guo () is a fifteen stroke character, your phone allows you to enter the complete pair in only three key presses.

Tips for Stroke mode

•Press

• Press and hold

[

]

to insert a space.

[

]

to start a new line.

• Press [Left] or [Right] to move the cursor.

Enter text

Page 31

X828.book Page 28 Monday, July 3, 2006 3:50 PM

Enter text

•Press [C] to clear letters one by one. Press and hold [C] to clear the entire display.

Using T9 English mode

This mode allows you to enter English by using T9 technology. T9 is a predictive text input mode that allows you to enter any character using single keystrokes.

Entering a word in T9 English mode

1. Press [2] to [9] to start entering a word. Press each key once for each letter.

Example

[6] to enter Hello. T9 predicts the word that you are typing,

and it may change with each key that you press.

2. Enter the whole word before editing or deleting the characters.

3. When the word displays correctly, go to step 4. Otherwise, press [0] to display alternative word choices for the keys that you have pressed.

Example

: Press [4], [3], [5], [5], and

: Of and Me use [6] and [3].

4. Press

[

next word.

]

to insert a space and enter the

Tips for using T9 English mode

•Press [1] to enter periods or apostrophes automatically.

•Press

• Press and hold

• Press the Navigation keys to move the

•Press [C] to delete characters one by

[

]

to change case.

[

]

to start a new line.

cursor.

one. Press and hold [C] to clear the entire display.

Adding a new word to the T9 dictionary

1. Enter the word that you want to add.

2. Press [0] to display alternative words for your key presses. When there are no more alternative words, the bottom line.

3. Press <

4. Enter the word you want using English

Add

word mode and press <OK>.

Add

appears on

Page 32

X828.book Page 29 Monday, July 3, 2006 3:50 PM

Using ABC mode

Press the appropriate key until the character you want appears on the display.

Key

Tips for using ABC mode

• To enter the same letter twice or to enter

•Press

•Press and hold

Characters in order displayed

Upper case Lower case

. , - ? ! @ : ( ) / # _ ~ 1

A B C 2 a b c 2

D E F 3 d e f 3

G H I 4 g h i 4

J K L 5 j k l 5

M N O 6 m n o 6

P Q R S 7 p q r s 7

T U V 8 t u v 8

W X Y Z 9 w x y z 9

space

+ = < > £ $ % & ¥ ¤ 0

a different letter on the same key, wait for the cursor to move to the right automatically or press [Right]. Then, enter the next letter.

[

]

to insert a space.

[

]

to start a new line.

• Press the Navigation keys to move the cursor.

•Press [C] to delete characters one by one. Press and hold [C] to clear the display.

Using Number mode

Number mode enables you to enter numbers.

Press the keys corresponding to the digits you want.

Using Symbol mode

Symbol mode enables you to insert symbols.

To Press

display more symbols [Up] or [Down].

select a symbol the corresponding

clear the entered symbols

insert the symbols <OK>.

number key.

[C].

Enter text

Page 33

X828.book Page 30 Monday, July 3, 2006 3:50 PM

Call functions

Advanced calling features

Making a call

1. In Idle mode, enter the area code and phone number.

• Press [C] to clear the last digit or press and hold [

• Press and hold [ ] to enter a pause between numbers.

2. Press [ ].

3. When you want to end the call, press [].

Making an international call

1. In Idle mode, press and hold [0]. The + character appears.

2. Enter the country code, area code, and phone number, then press [ ].

] to clear the whole display.

Redialling recent numbers

1. In Idle mode, press [ ] to display the list of recent numbers.

2. Scroll to the number you want and press [].

Making a call from Phonebook

Once you have stored a number in Phonebook, you can dial the number by selecting it from Phonebook.p. 36

You can also use the speed dial feature to assign your most frequently called numbers to specific number keys.p. 38

You can quickly dial a number from the SIM card using its location number assigned when stored.

1. In Idle mode, enter a location number and press [ ].

2. Press [Left] or [Right] to scroll through other numbers.

3. Press <

Dial

you want.

> or [ ] to dial the number

Page 34

X828.book Page 31 Monday, July 3, 2006 3:50 PM

Answering a call

When you receive an incoming call, the phone rings and displays the incoming call image.

Press <

> or [ ] to answer the call.

Tips for answering a call

• When

•Press <

• Press and hold [Volume] to reject a call

Anykey answer

press any key, except for < [].p. 82

Reject

> or [ ] to reject a call.

or mute the ringer, depending on the

Volume key

setting.p. 82

is active, you can

Reject

> and

Viewing missed calls

If you have missed calls, the screen displays how many calls you have missed.

1. Press <

2. If necessary, scroll through the missed

3. Press [ ] to dial the number you want.

calls.

View

Using the headset

Use the headset to make or answer calls without holding the phone.

Connect the headset to the jack on the right side of the phone. The button on the headset works as follows:

To Press

redial the last call the button twice.

answer a call the button.

end a call the button.

Options during a call

You can access a number of functions during a call.

Adjusting the volume during a call

Use [Volume] to adjust the earpiece volume during a call.

Press [Volume up] to increase the volume level and [Volume down] to decrease the volume level.

Call functions

Page 35

X828.book Page 32 Monday, July 3, 2006 3:50 PM

Call functions

Placing a call on hold/Retrieving

Press <

Hold

> or <

on hold or retrieve the call.

Retrieve

> to place a call

Making a second call

You can make another call if your network supports this function.

1. Press <

2. Make the second call in the normal way.

3. Press <

4. Press <

5. To end the current call, press [ ].

Hold

> to put the call on hold.

Swap

calls.

call

to end the call on hold.

> to switch between the

Options

> and select

End held

Answering a second call

You can answer an incoming call while already on the phone, if your network supports this function and you have activated the call waiting feature.p. 86

1. Press [ ] to answer the call. The first call is automatically put on hold.

2. Press <

calls.

Swap

> to switch between the

3. Press <

4. To end the current call, press [ ].

Options

call

to end the call on hold.

> and select

Using the speakerphone feature

Use the speakerphone feature to talk and listen with the phone a short distance away.

Press [ ] and then < Speakerphone feature. Press the key again to switch back to the earpiece.

Using In-call options

Press <

Options

options during a call:

•

Speaker on/Normal

Speakerphone feature or switch back to Normal mode.

•

Switch to headset/Switch to phone

switch the call to a Bluetooth headset or hands-free car kit or back to the phone. To use this feature, you first need to connect your headset to the phone.



p. 88

Yes

> to access the following

: turn on the

End held

> to activate the

Page 36

X828.book Page 33 Monday, July 3, 2006 3:50 PM

•

: access the phone's menu

functions.

•

Voice on/Voice off

: switch off the phone's microphone so that the other person on the phone cannot hear you, or switch it back on.

•

Mute keys/Send keys

: switch the key

tones on or off.

To communicate with answering machines or computerised telephone systems, selected.

•

Send DTMF

Send keys

must be

: send the DTMF (Dual tone multi-frequency) tones as a group. The DTMF tones are the tones used in phones for tone dialling, sounding when you press the number keys. This option is helpful for entering a password or an account number when you call an automated system, like a banking service.

•

Phonebook

•

End held call

: access the contact list.

: disconnect the call

currently on hold.

•

Transfer

: transfer the currently active call to a caller on hold. The two callers can talk to each other, but you are disconnected from the call.

•

Join

: set up a multi-party call by adding a caller on hold to a currently active call. You can include up to 5 people on a multi-party call.

•

Select one

: select one of multi-party call participants. You can then use the following options:

Private

: have a private conversation with one multi-party call participant. The other participants can converse with each other. After the private conversation, select

Join

to return both all private participants to the multi-party call.

Remove

: disconnect one multi-party call

participant.

Call functions

Page 37

X828.book Page 34 Monday, July 3, 2006 3:50 PM

Menu functions

All menu options listed

Call log

Use this menu to view the calls you have dialled, received, or missed, and the length of calls. You can also check the cost of your calls, if your SIM card supports this function.

To access this menu, press < mode and select

Recent contacts

This menu displays the most recent calls dialled, received, or missed.

Accessing a call record

1. Press [Left] or [Right] to move to

2. Press [Up] or [Down] to scroll through

3. Press [ ] to view the details of a call,

(Menu 1)

Call log

(Menu 1.1)

another call type.

the call list.

or [ ] to dial a number.

> in Idle

Using call record options

While viewing call details, press < to access the following options:

•

Call

: edit the number and dial it.

•

Add to phonebook

Phonebook.

•

Send

: send an SMS or MMS message to

the selected number.

•

Delete

: delete the selected call record or

all records.

Missed calls

This menu displays the most recent calls you did not answer.

Dialled calls

This menu displays the most recent calls you have dialled.

Received calls

This menu displays the most recent calls you have received.

: save the number to

(Menu 1.2)

(Menu 1.3)

(Menu 1.4)

Options

Page 38

X828.book Page 35 Monday, July 3, 2006 3:50 PM

Delete all

Use this menu to delete all of the records in each call type.

1. Press [ ] to select the call types to be cleared.

2. Press <

3. Press <

Call time

This menu displays the time log for calls made and received. The actual time invoiced by your service provider will vary.

•

Last call time

last call.

•

Total dialled calls

length of all the calls you have dialled.

•

Total received calls

length of all the calls you have received. To reset the call timer, press <

and select You need to enter the phone password.

(Menu 1.5)

Delete Yes

(Menu 1.6)

The password is preset to You can change this password.



p. 90

> to confirm the deletion.

: check the length of your

: check the total

Reset selected

Options

Reset all

00000000

Call costs

This network feature displays the cost of calls. This menu is available only if supported by your SIM card. Note that this is not intended to be used for billing purposes.

•

Last call cost

last call.

•

Total cost

your calls. If the total cost exceeds the maximum cost set in you must reset the counter before you can make another call.

•

Max. cost

limit set in

•

Reset counters

counters.

•

Set max. cost

authorised for your calls.

•

Price/Unit

applied when the cost of your calls is

calculated.

(Menu 1.7)

: check the maximum cost

: check the cost of your

: check the total cost of all of

Set max. cost

: reset the cost

: set the maximum cost

: set the price per unit that is

Menu functions

Call log

(Menu 1)

Page 39

X828.book Page 36 Monday, July 3, 2006 3:50 PM

Menu functions

Phonebook

You can store phone numbers on your SIM card and in your phone’s memory. The SIM card and phone’s memory are physically separate, but they are used as a single entity called Phonebook.

To access this menu, press < mode and select

Contact list

Use this menu to search for numbers in Phonebook.

You can quickly access this menu by pressing <

(Menu 2)

Phonebook

(Menu 2.1)

Contacts

> in Idle

> in Idle mode.

Finding an entry

1. Enter the first few letters of the name that you want to find.

2. Select a name from the list.

3. Scroll to a number and press [ ] to dial or press [ ] to edit contact information.

Finding a contact in Idle mode

You can find contacts in Idle mode, by the spelling of a contact name. The phone searches for the contact names starting with the letters labelled on any of the keys you pressed.

1. In Idle mode, press the number keys containing the letters you want.

2. Press <

Options

spelling

for the matching contacts and shows results.

> and select

.The phone searches Phonebook

Search as

Using Phonebook options

While viewing contact details, press <

Options

•

> to access the following options:

Edit

: edit contact information.

Send message

message to the selected number, or an e-mail to the selected address.

Copy to

memory or to the SIM card.

Send via

MMS, e-mail, or Bluetooth.

Delete

: delete the selected contact.

: send an SMS or MMS

: copy the contact to the phone’s

: send the contact via SMS,

Page 40

X828.book Page 37 Monday, July 3, 2006 3:50 PM

Create contact

Use this menu to add a new contact to Phonebook.

(Menu 2.2)

Storing a number in the phone’s memory

1. Select

2. Change the settings or enter information

3. Press <

Phone

about the contact.

•

Last name/First name

name.

•

Mobile/Home/Office/Fax/Other

add a number in any type.

•

: assign an e-mail address.

Caller ID

you to a call from the person.

Ringtone

you to a call from the person.

Group

group.

Note

: assign an image to alert

: assign a ringtone to alert

: assign the contact to a caller

: add a memo about the person.

Save

> to save the contact.

: assign a

Storing a number on the SIM card

1. Select

2. Enter information about the contact.

SIM

•

Name

: assign a name.

•

Phone number

•

Location

To assign a caller ID image, ringtone, or group, the contact must be saved to the phone’s memory.

3. Press <

Group

Use this menu to organise your contacts in caller groups.

Save

(Menu 2.3)

: add a number.

: assign a location number.

> to save the contact.

Creating a new caller group

1. Press <

2. Enter a name for the group.

3. Select the caller ID line and set an

4. Select the ringtone line and set a

5. Press <

group

image.

melody.

Options

Save

> and select

> to save the group.

Create

Adding members to a caller group

1. Select a group.

2. Press <

Add

Menu functions

Phonebook

(Menu 2)

Page 41

X828.book Page 38 Monday, July 3, 2006 3:50 PM

Menu functions

3. Press [ ] to select the contacts to be added.

4. Press <

Options

> and choose

Select

Managing caller groups

While viewing the group list, press <

Options

•

Speed dial

Use this menu to assign a speed dial number (2 to 9) for 8 of your most frequently dialled numbers.

> to access the following options:

View

: display the members of the

selected group.

Create group Edit

: change the group properties.

Send message

e-mail message to the group members you want.

Delete

groups. Group members, however, will not be deleted from Phonebook.

: add a new group.

: send an SMS, MMS, or

: delete the selected group or all

(Menu 2.4)

Assigning speed dial numbers

1. Select a key location from 2 to 9. Key 1 is reserved for your voicemail server.

2. Select a contact from the contact list.

3. Select a number, if the contact has more than one number.

Managing speed dial entries

From the Speed dial screen, press <

Options

•

> to access the following options:

Add

: assign a number to an unassigned

key.

View

: check the name and number

assigned to a key.

Change

: assign a different number to a

key.

Remove

a key.

: clear the speed dial setting for

Dialling speed dial entries

In Idle mode, press and hold the appropriate key.

My namecard

Use this menu to create a name card and send it to other people.

(Menu 2.5)

Saving your name card

The procedure for creating your name card is the same as the one for saving a phone number in the phone’s memory.p. 37

Page 42

X828.book Page 39 Monday, July 3, 2006 3:50 PM

Using name card options

After saving your name card, press <

Options

•

Own number

Use this menu to check your phone numbers, or to assign a name to each of the numbers. Changes made here do not affect the actual subscriber numbers on your SIM card.

Management

Use this menu to manage Phonebook entries.

•

> to access the following options:

Edit

: edit the name card.

Send via

MMS, e-mail, or Bluetooth.

Exchange namecard

cards with another person via Bluetooth.

Delete

Save new contact to

memory location for saving contacts. If you select ask you to select a memory location each time you save a number.

: send the name card via SMS,

: exchange name

: delete the name card.

(Menu 2.6)

(Menu 2.7)

Always ask

: select a default

, the phone will

•

Copy all to

stored on the SIM card to the phone’s memory, or vice versa.

•

Delete all

from your phone’s memory, your SIM card, or both.

•

Memory status

contacts you have stored in the phone’s memory and on the SIM card.

Service number

Use this menu to view the list of Service Dialling Numbers (SDN) assigned by your service provider, including emergency numbers and numbers for directory enquiries. This menu is available if your SIM card supports SDN.

1. Scroll to the number you want.

2. Press <

Information number

This menu is available if supported by your SIM card. Use this menu to access the number at which you can get information about transportaion, weather, and entertainment.

1. Scroll to the number you want.

2. Press <

: copy all of the contacts

: delete all of the contacts

: check the number of

(Menu 2.8)

Dial

> or [ ].

(Menu 2.9)

Dial

> or [ ].

Menu functions

Phonebook

(Menu 2)

Page 43

X828.book Page 40 Monday, July 3, 2006 3:50 PM

Menu functions

Applications

Use this menu to play Java games, play music files, or edit photos. You can also use convenient features, such as a voice recorder, alarm clock, calculator, converter, and stopwatch.

To access this menu, press < mode and select

Music player

Use this menu to enjoy music. First, you need to save music files into your phone’s memory.

To enjoy high quality music, you can use an optional Bluetooth stereo headset.

Normal headsets and Bluetooth mono headsets are not compatible with the Music player.

(Menu 3)

Applications

(Menu 3.1)

> in Idle

Downloading or receiving music files

Your phone supports *.mp3, *.aac, and *.m4a files from the phone’s memory.

Use these methods to save music files to your phone’s memory:

• Download from the wireless webp. 49

• Download from a computer using the optional Samsung PC Studio



Samsung PC Studio User’s Guide

• Receive via an active Bluetooth connectionp. 89

The downloaded or received files are stored in the

Music

folder.p. 69

Creating a play list

1. From the Music player screen, press <

Options

→ Add all

2. For files to be added and press <

3. Press < player screen.

> and select or

Add files

Back

Add files

, press [ ] to select the

> to return to the Music

Add to playlist

Select

Playing music files

1. From the Music player screen, press <

Options

2. Select Select

use a Bluetooth headset and then search for and connect to the headset.

> and select

Phone

to use the phone speaker.

Bluetooth stereo headset

Play via

Page 44

X828.book Page 41 Monday, July 3, 2006 3:50 PM

During playback, use the following keys:

Key Function

Pauses or resumes playback.

Left Returns to the previous file.

Right Skips to the next file.

Up Opens the play list.

Down Stops playback.

Volume Adjusts the volume level.

Turns 3D sound on or off.

Changes the playback animation.

Changes the repeat mode.

Changes the equaliser mode.

Turns Shuffle mode on or off.

Locks the keys when held down to keep accidental presses from affecting playback.

Using Music player options

From the Music player screen, press <

Options

> to access the following options:

•

Play via/Pause:

begin or pause

playback.

•

Transfer to Bluetooth stereo headset/Transfer to phone

: switch sound output to a Bluetooth stereo headset or back to the phone speaker.

•

Open

: access the play list of the current album or album list. On the album list, you can set up multiple albums.

•

Go to Music

•

Send via

: access the

Music

: send the current file via

e-mail or Bluetooth.

•

Set as

: set the file as your ringtone or

as a ringtone for a Phonebook entry.

•

Activate key

: get a licence key when

the key for the selected DRM file expires.

•

Remove from playlist

: remove the

selected file from the play list.

•

Settings

: change the default settings for

playing music files.

Repeat mode Shuffle

: select a repeat mode.

: set the MP3 player to play

tracks in random order.

MP3 overrides other sounds

: set the Music player to continue playback even if you exit it.

Menu functions

folder.

Applications

(Menu 3)

Page 45

X828.book Page 42 Monday, July 3, 2006 3:50 PM

Menu functions

Equaliser 3D sound Visualisation

animation and select the length of time the backlight remains on while playing MP3 files.

Volume

•

Details

•

Key management

keys you have acquired.

: select an equaliser setting. : turn 3D sound on or off.

: change the playback

: select a volume level.

: access the file properties.

: manage the licence

Accessing the play list

From the Music player screen, press [Up].

Press <

Options

options:

•

Play via

via the phone speaker or a Bluetooth stereo headset.

•

Add to playlist

list.

•

Go to album list

•

Move to

another album.

•

Copy to

another album.

> to access the following

: play the currently selected file

: add files to the play

: access the album list.

: move the selected file to

: copy the selected file to

•

Move track in playlist

selected file to the position you want within the play list.

•

Activate key

when the key for the selected DRM file expires.

•

Remove

files from the play list.

•

Details

•

Key management

keys you have acquired.

: get a new licence key

: remove the selected file or all

: access the file properties.

Voice recorder

Use this menu to record voice memos. A voice memo can be up to one hour long.

: move the

: manage the licence

(Menu 3.2)

Recording a voice memo

1. Press [ ] to start recording.

2. Speak into the microphone. Press [ ] to pause or resume

recording.

3. Press <

4. Press [ ] to review the voice memo,

Stop

recording. The voice memo is saved automatically.

or [Up] to record a new memo.

> or [Down] to end

Page 46

X828.book Page 43 Monday, July 3, 2006 3:50 PM

Playing a voice memo

1. From the Voice recorder screen, press <

Options

clips

2. Select a voice memo.

During playback, use the following keys:

Key Function

Left Moves backward in a memo.

Right Moves forward in a memo.

Volume Adjusts the volume.

Down Stops playback.

> and select

Pauses or resumes playback.

Go to My voice

Changing the recording mode

You can change the recording mode of the voice recorder. The maximum recording time is determined by this setting. Before recording a memo, press < select

Settings → a recording mode:

•

Limit for multimedia message

a voice memo for adding to an MMS message.

•

Limit for email

for adding to an e-mail.

Options

: record a voice memo

> and

: record

•

Maximum 1 hour

of up to one hour.

Image editor

Use this menu to edit your photos using various editing tools.

: record a voice memo

(Menu 3.3)

Applying an effect

1. Press <

2. Select a photo or take a new photo.

3. Press <

4. Press <

5. Press <

6. Enter a new file name, press <

Options

image → Open

Options

an effect option.

Done

Options

and select Ok.

> and select

Take photo

> and select

New

Effects →

Save as

Options

Transforming

1. Select a photo or take a new photo.

2. Press <

3. Press <

Options

→

an option:

•

Resize

•

Rotate

clockwise or counterclockwise.

•

Flip

: flip the photo.

Done

> and select

: change the photo size. : rotate the photo 90 degrees

Transform

Menu functions

Applications

(Menu 3)

Page 47

X828.book Page 44 Monday, July 3, 2006 3:50 PM

Menu functions

4. Press <

5. Enter a new file name, press <

Options

and select Ok.

> and select

Save as

Options

Cropping

1. Select a photo or take a new photo.

2. Press <

3. Move the cropping frame to the area of

4. Press <

5. Press <

6. Enter a new file name, press <

Options

the image you want. Press <

Options

change the frame size.

Options Options

and select Ok.

> and select

> and select > and select

Crop

Resize

Done Save as

Options

Adding visual features

You can decorate photos by adding a frame, an image, or a note.

1. Select a photo or take a new photo.

2. Press <

3. Select an item or enter text to be

4. Adjust the position of the inserted item

Options

feature type.

inserted.

and press <

> and select

Done

Insert →

5. Press <

6. Enter a new file name, press <

Options

and select Ok.

> and select

Save as

Options

Merging a stamp effect

This editing tool allows you to make an

outline stamp of a photo and then merge it with another photo. You can use this tool to create your own photo postcard by taking a photo of a handwritten message and merging it with a photo.

1. Select a photo or take a new photo.

2. Press <

3. Press <

4. Add a photo by selecting or taking a

5. Press <

6. Press <

Options

stamp

. The background photo appears

in the image box next to .

Options

image

photo. The added photo appears in the image box next to . This will be the stamp.

Options

stamp photo is added to the background photo as an outline.

Options

stamp edit options:

> and select

> to access the following

Merge

Add

Merge

. The

Page 48

X828.book Page 45 Monday, July 3, 2006 3:50 PM

•

Resize

: change the stamp size.

•

Move

: change the position of the

stamp.

•

Rotate

: rotate the stamp.

•

Stamp colour

: change the stamp

colour.

•

Shadow on

: apply a shadow to the

stamp.

7. When you have finished, press <

Options

8. Press <

9. Enter a new file name, press <

> and select

Options

Done

> and select

Save as

Options

and select Ok.

Java world

(Menu 3.4)

Use this menu to access the embedded Java games and downloaded Java applications.

Accessing an embedded game

1. Select

My games →

a game.

2. Press [ ].

Using Java application options

From the application list, press <

Options

to access the following options:

•

Start

: launch the selected application.

•

Move to

: move the application to

another folder.

•

Delete

: delete the selected application or all applications, except for the embedded games.

•

Protection

: protect the application from

being deleted.

•

Details

: access the application

properties.

•

Permissions

: set permission settings for services charging you additional costs, such as network access and SMS.

•

Upgrade

: upgrade the application to the

latest version.

•

Send information via Text message

send the URL containing the application via SMS.

•

Memory status

: access memory

information for applications.

•

Settings

: select a connection profile to be used for applications requiring network access. You can also create or edit a profile.p. 91

Menu functions

Applications

(Menu 3)

Page 49

X828.book Page 46 Monday, July 3, 2006 3:50 PM

Menu functions

World clock

Use this menu to set your local time zone and find out what time it is in another part of the world.

(Menu 3.5)

Viewing world time

1. From the world map, press [Down].

2. Press [Left] or [Right] to scroll to the city you want. As the time line moves, the time and date of the given zone display.

3. Press [ ] to save the city as your local time zone.

Applying daylight savings time

1. From the world map, press < and select

2. Press [ ] to select the time zones you want.

3. Press <

Alarm

Use this menu to set alarms. The alert type for a normal alarm corresponds to the call alert type settings. A wake-up alarm is not affected by your sound settings.

Apply daylight saving time

Save

(Menu 3.6)

Options

Setting an alarm

1. Select the type of alarm.

2. Set each alarm option:

•

Alarm

: activate the alarm.

•

Alarm time

alarm to ring.

•

AM/PM

format.

•

Repeat

•

Alarm tone

3. Press <

Save

: enter the time for the

: set AM or PM in 12-hour

: select a repeat option.

: select an alarm tone.

Stopping an alarm

• For a non-wake-up alarm, press any key.

• For a wake-up alarm, press <

or [ ]. Press any key, except <

[ ], to cause it to sound again after 5 minutes. You can do this a maximum of 5 times.

Confirm

Setting the alarm to sound even if the phone is off

From the Alarm screen, select

→ On

Confirm

> and

Auto power

Page 50

X828.book Page 47 Monday, July 3, 2006 3:50 PM

If the phone is off when it is time for the alarm to sound, the phone switches on and sounds the alarm.

Deactivating an alarm

1. Select the alarm you want to deactivate.

2. Select

Calculator

Save

Off

on the Alarm line and press

(Menu 3.7)

Use this menu to perform basic arithmetic functions, such as addition, subtraction, multiplication, and division.

1. Enter the first number.

• Press <

.()

> to insert a decimal point

or bracket.

• Press [ ] or [ ] to move the cursor.

2. Press one of the Navigation keys to access the math function you want.

3. Enter the second number.

4. Press [ ] to view the result.

5. If necessary, repeat from step 2 to continue the calculation.

Converter

(Menu 3.8)

Use this menu for common conversions, such as currency and temperature.

1. Select a converter.

2. Press [Left] or [Right] to select the original unit and press [Down].

3. Enter the value to be converted and press [Down].

• Press [ ] to insert a decimal point.

• Press [ ] to change the temperature

to above zero (+) or below zero (-).

4. Press [Left] or [Right] to select the unit to which you want to convert.

The equivalent value for the amount you entered displays.

For the currency converter, you can view and set currency rates by pressing <

Timer

View rate

(Menu 3.9)

Use this menu to set a period of time for the phone to count down. The phone will sound an alarm when the specified period of time has expired.

Menu functions

Applications

(Menu 3)

Page 51

X828.book Page 48 Monday, July 3, 2006 3:50 PM

Menu functions

Starting the timer

1. Press <

2. Enter the length of time you want to

3. Press [ ] to start counting down.

Stopping the timer

• Press any key when the timer rings.

• Press [ ] on the Timer screen to stop

Stopwatch

Use this menu to measure elapsed time. The maximum time is 10 hours.

1. Press [ ] to start the stopwatch.

2. Press [ ] to check an interval. You can

Key management

Use this menu to manage the licence keys you have acquired to activate media contents locked by DRM systems.

Press < options:

Set

count down and press <OK>.

the timer before it rings.

(Menu 3.10)

repeat this step for a total of 3 intervals.

(Menu 3.11)

Options

> to access the following

•

View

: open the corresponding media

content.

•

Delete

•

SIM AT

This menu is available if you use a SIM AT card that supports SIM Application Toolkit menus and provides additional services, such as news, weather, sports, entertainment, and location services. Available services may vary, depending on your service provider’s plans. For details, see your SIM card instructions or contact your service provider.

: delete the selected licence key.

Go to My items

corresponding file folder.

Details

: access the properties of the

licence key.

(Menu 3.12)

: access the

Page 52

X828.book Page 49 Monday, July 3, 2006 3:50 PM

Browser

The Wireless Application Protocol (WAP) browser on your phone allows you to access the wireless web. From the wireless web, you can access up-to-date information and a wide variety of media content, such as games, wallpapers, ringtones, and music files.

To access this menu, press < mode and select

Home

Use this menu to connect your phone to the network and load the homepage of the wireless web service provider. You can also press [ ] in Idle mode and select

(Menu 4)

(Menu 4.1)

Browser

> in Idle

Home

Navigating the web

To Press

scroll through browser items

select a browser item

[Up] or [Down].

[], or < and select

Options

Go to

To Press

return to the previous page

move to the next page

Back

Options

select Go →

Options

select Go →

Using page options

From any web page, press < access the following options:

•

Go to

: access the linked web page.

•

Go to homepage

homepage.

•

Enter URL

manually.

•Go: move backward or forward through pages in history.

•

Reload

: reload the current page with

updated information.

•

Bookmarks

page or access the bookmark list.

•

Send URL

page via SMS.

: return to the

: enter a URL address

: bookmark the current

: send the URL of the current

>, or

> and

Back

> and

Forward

Options

> to

Menu functions

Browser

(Menu 4)

Page 53

X828.book Page 50 Monday, July 3, 2006 3:50 PM

Menu functions

•

To Desktop view/To SmartFit view

change the display mode of the browser.

•

Save

: save the selected image or page.

•

Page details

: access the page

properties.

•

Browser options

: change the various

settings for the browser.

Cache

: change the cache mode or clear the cache. A cache is a temporary memory that stores recently accessed web pages.

: change the cookie acceptance mode or delete cookies. Cookies are pieces of personal information sent to a web server while navigating the web.

Preferences

: change the browser

display and sound settings.

Certificates

: access certificate

information.

About browser

: access version and

Exiting the browser

Press [ ] to end the network connection and exit the browser.

SFC home

(Menu 4.2)

Use this menu to access Samsung Fun Club, the preset website providing Samsung mobile phone users with attractive download services of updated ringtones and wallpapers.

You can download:

• colour images.

• polyphonic melodies.

• information and electronic catalogues for Samsung Electronics products.

SFC home

(Menu 4.2.1)

Selecting this menu loads the Samsung Fun Club homepage. You can also press [ ] in Idle mode and select

When you access Samsung Fun Club for the first time, please launch the web browser first, then access Samsung Fun Club. This service requires WAP subscription and may be unavailable depending on your local system and services.

SFC home

Page 54

X828.book Page 51 Monday, July 3, 2006 3:50 PM

Service area

Each time you move to China or HongKong, you need to change this setting to use the SFC service, according to the area where you are.

Enter URL

Use this menu to manually enter a URL address and access the associated web page.

You can add the entered URL to the Bookmark list by selecting

Bookmarks

Use this menu to save URL addresses in order to quickly access web pages.

(Menu 4.2.2)

(Menu 4.3)

(Menu 4.4)

Add bookmark

Adding a bookmark

1. Press <

2. Enter a title for the bookmark and press

3. Enter a URL address and press <

Add

been saved, press < select

[Down].

>. If a bookmark has already

Add bookmark

Options

> and

Save

Accessing a bookmarked page

Selecting a bookmark item launches the web browser and accesses the associated web page.

Using bookmark options

After saving an item, press < access the following options:

•

Go to

: access the bookmarked web

page.

•

Go to homepage

homepage.

•

Enter URL

manually.

•

Edit bookmark

and title of the bookmark.

•

Add bookmark

•

Send URL

bookmark via SMS.

•

Delete

: delete the selected bookmark or

all bookmarks.

•

Add new phrases

phrases to the PTI dictionary.

•

Cancel

: exit the current screen.

: access the

: enter a URL address

: edit the URL address

: add a new bookmark.

: send the URL address of the

: add words or

Options

Menu functions

> to

Browser

(Menu 4)

Page 55

X828.book Page 52 Monday, July 3, 2006 3:50 PM

Menu functions

Saved pages

(Menu 4.5)

You can access the list of pages you have saved while online.

If you select a link on the page, the phone switches to online to access the linked page.

History

(Menu 4.6)

You can access the list of pages you have accessed recently.

Select a URL from the list to access the corresponding web page.

Clear cache

(Menu 4.7)

Use this menu to clear information stored in the cache.

Browser settings

(Menu 4.8)

Use this menu to select a connection profile to be used for accessing the wireless web. You can also create or edit a profile.p. 91

Messages

Use the

(Menu 5)

Messages

menu to send and receive text messages, multimedia messages, and e-mails. You can also use push message and cell broadcast message features.

To access this menu, press < mode and select

Create message

Messages

(Menu 5.1)

> in Idle

Use this menu to create and send messages.

Text message

(Menu 5.1.1)

Short Message Service (SMS) allows you to send or receive text messages that may include simple pictures, animated images, and melodies.

Creating and sending an SMS message

1. Enter your message and press [ ].

• The maximum number of characters allowed in a message varies by service provider. If your message exceeds the maximum number of characters, the phone will split the message.

• You can use various options by pressing <



Options

next section

Page 56

X828.book Page 53 Monday, July 3, 2006 3:50 PM

2. Enter a destination number. To send the message to more than one

recipient, fill in additional destination fields.

3. Press [ ] to send the message.

Using options while composing an SMS message

While composing a message, press <

Options

> to access the following options:

•

Save and send

: save the message

and then send it.

•

Send only

•

Insert

: just send the message.

: add a template, Phonebook

entry, or bookmark to text.

•

Add image/Add animation/Add melody

: attach a simple image,

animated image, or melody.

•

Attach

: attach a Phonebook entry as a name card or calendar data as a data format attachment.

•

Save in

: save the message in

another message box.

•

Add new phrases

: add the entered

word or phrase to the PTI dictionary.

•

Cancel

: return to the previous level.

Multimedia message

(Menu 5.1.2)

Multimedia Message Service (MMS) delivers messages containing a combination of text, image, video, and audio, from phone to phone or from phone to e-mail.

1. Select the

Subject

• You can use various options by pressing <



next section

line.

Options

> in each field.

2. Enter the message subject and press [].

3. Select the

Image and video

Sound

line and add an image, a video, or a sound file.

• The maximum size allowed for a message can differ, depending on your service provider.

• Depending on the file type or DRM (Digital Rights Management) system, some files may not be able to be forwarded.

4. Select the

Message

line.

5. Enter the message text and press [ ].

Menu functions

Messages

(Menu 5)

Page 57

X828.book Page 54 Monday, July 3, 2006 3:50 PM

Menu functions

Using options while composing an MMS message

While composing a message, press <

Options

> to access the following options:

•

Insert

: add a template, Phonebook

entry, or bookmark.

•

Save in

: save the message in

another folder.

•

Add new phrases

to the PTI dictionary.

•

Add

: add the message subject or

message text.

•

Add image/Add video/Add sound

add an image, a video clip, or a sound clip.

•

Edit

: edit the subject or text of your

message.

•

Preview

be shown on the recipient’s phone.

•

View

•

Change image/Change video Change sound

item.

•

Send

: view the message as it will

: open the selected attachment.

: send the message.

: add a new word

: replace an added

•

Add page

page by pressing [Left] or [Right].

•

Delete page

•

Edit page

page display or move the page forward among the other pages.

•

Attach

a name card or calendar data as a data format attachment, or a document file stored in the

files

•

Remove subject/Remove

message/Remove media/Remove sound/Remove

item.

•

Cancel

message.

6. When you have finished, press <

Options

7. Enter a phone number or e-mail address. To send the message to more than one

recipient, fill in additional destination fields.

8. Press [ ] to send the message.

: add pages. Move to each

: delete an added page.

: change the duration of

: attach a Phonebook entry as

Send

Other

folder.

: remove an added

: cancel composing a

> and select

Page 58

X828.book Page 55 Monday, July 3, 2006 3:50 PM

(Menu 5.1.3)

You can create and send e-mails that include text, audio, and images. To use this feature, you need to subscribe to an e-mail service and set up your e-mail account and profile.



p. 91

1. Select the

Subject

You can use various options by pressing <

line.

Options

> in each field.

2. Enter the subject of your e-mail and press [ ].

3. Select the

Message

line.

4. Enter the e-mail text.

5. When you have finished, press [ ].

6. Select the

File attached

line and select

one of the following options to add files:

•

Add image/Add video/Add sound Add music

: add media files stored in

the phone’s memory.

Depending on the file type or DRM (Digital Rights Management) system, some files may not be able to be forwarded.

•

Add other files

stored in the

•

Send

•

: send the e-mail.

Save in

: add document files

Other files

folder.

: save the e-mail in another

box.

•

Attach

: attach name cards or calendar data as data format attachments.

7. When you have finished, press <

Options

> and select

Send

8. Enter an e-mail address. To send the e-mail to more than one

recipient, fill in additional destination fields.

9. Press [ ] to send the e-mail.

Using options while composing an email.

While composing an e-mail, press <

Options

> to access the following options:

•

Insert

: add a template, Phonebook

entry, or bookmark.

•

Save in

: save the message in

another folder.

•

Add new phrases

: add a new word

to the PTI dictionary.

Menu functions

Messages

(Menu 5)

Page 59

X828.book Page 56 Monday, July 3, 2006 3:50 PM

Menu functions

•

Cancel

:return to the previous level.

•

Edit

: edit the subject or text.

•

Remove subject/Remove message

•

Remove attachment

selected attachment.

•

Remove all attachments

attachments.

My messages

Use this menu to access messages you have received, sent, or which have failed in sending.

Inbox

(Menu 5.2.1)

This folder stores all of the messages you have received, except for e-mails.

Viewing a message

The following icons may appear on the message list to show the message type:

• SMS

• MMS

• MMS notification ( : Being

• Voicemail

: clear the subject or text.

: delete the

: delete all

(Menu 5.2)

retrieved, : Failed to retrieve)

• Push message from web servers.

• Configuration message, containing

network parameters from your service provider.

• CB (Cell broadcast) message from

your service provider

• Delivery report for your sent

messages

• Depending on the DRM (Digital Rights Management) system, messages having web content may not be able to be forwarded.

icon next to a message means that

• A the message is of high priority. A greycoloured message icon indicates low priority.

Using message options

While viewing a message, press <

Options

to access the following options:

SMS messages

•

Reply via

: reply to the sender via SMS

or MMS.

•

Forward

: forward the message to other

people.

•

Delete

: delete the message.

Page 60

X828.book Page 57 Monday, July 3, 2006 3:50 PM

•

Move to phone/Move to SIM

: move the message between the SIM card and the phone’s memory.

•

Cut address

: extract URLs, e-mail addresses, or phone numbers from the message.

•

Cut media

: save media content from

the message to your phone’s memory.

•

Protection

: protect the message from being deleted. You can protect only those messages stored in the phone’s memory.

•

Add to Block list

: add the sender’s number to the Block list to reject the messages from the sender.

MMS messages/MMS notifications

•

Retrieve

: retrieve the MMS message

from the MMS server.

•

Reply via text message

: reply to the

sender via SMS.

•

Reply via multimedia message to

reply to the sender via MMS.

•

Forward

: forward the message to other

people.

•

Delete

: delete the message.

•

Cut address

: extract URLs, e-mail addresses, or phone numbers from the message.

•

Attached items

: save media content from the message to your phone’s memory.

•

Protection

: protect the message from

being deleted.

•

Details

: access the message properties.

Configuration messages

•

Install

: apply the configuration specified

in the message to your phone.

•

Cut address

: extract URLs, e-mail addresses, or phone numbers from the message.

•

Delete

: delete the message.

Push messages

•

Go to URL

: connect to the URL specified

in the message.

•

Cut address

: extract URLs, e-mail addresses, or phone numbers from the message.

•

Delete

: delete the message.

•

Protection

: protect the message from

being deleted.

Menu functions

Messages

(Menu 5)

Page 61

X828.book Page 58 Monday, July 3, 2006 3:50 PM

Menu functions

CB messages

•

Save

: save the message to the phone’s

memory.

•

Cut address

addresses, or phone numbers from the message.

•

Delete

Delivery reports

•

Cut address

addresses, or phone numbers from the report.

•

Delete

•

Protection

being deleted.

Drafts

(Menu 5.2.2)

This folder stores messages you have saved to send at a later time.

When you select a message, it opens in Edit mode so that you can edit and send the message.

Outbox

This folder stores messages that the phone is attempting to send or has failed to send.

: extract URLs, e-mail

: delete the message.

: extract URLs, e-mail

: delete the report.

: protect the report from

(Menu 5.2.3)

The following icons are available to show the message status:

• Being sent

• Failed to be sent

While viewing a message, press < to access the following options:

•

Send again

•

Forward

people.

•

Cut address

addresses, or phone numbers from the message.

•

Delete

•

Protection

being deleted.

•

Details

Sentbox

This folder stores messages that you have sent.

While viewing a message, press < to access the following options:

•

Send

•

Forward

people.

: retry sending the message.

: forward the message to other

: extract URLs, e-mail

: delete the message.

: protect the message from

: access the message properties.

(Menu 5.2.4)

: send the MMS message.

: forward the message to other

Options

Page 62

X828.book Page 59 Monday, July 3, 2006 3:50 PM

•

Cut address

: extract URLs, e-mail addresses, or phone numbers from the message.

•

Delete

: delete the message.

•

Protection

: protect the message from

being deleted.

•

Details

: access the message properties.

Email inbox

(Menu 5.2.5)

This folder stores e-mails that you have received.

Viewing an e-mail

1. Select an e-mail account.

2. Press <

Yes

select

> when

displays, or press <

Check for new email

Check for new

Options

. The phone

> and

checks the e-mail server and downloads new e-mails.

The following icons may appear on the list to show the e-mail status:

• Retrieved from the server

• Being retrieved

• Failed to retrieve

A ! icon next to a message means that the message is of high priority. A grey-coloured message icon indicates low priority.

3. Select an e-mail or a header.

4. Press [ ] or [ ] to view the previous or next e-mail.

5. Press [Left] or [Right] to view other pages in the e-mail.

Using e-mail options

While viewing the e-mail or header, press <

Options

•

> to access the following options:

Retrieve

: retrieve the body of the

e-mail from the e-mail server.

•

: send a reply to the sender or to

the sender and all of the other recipients.

•

Forward

: forward the e-mail to other

people.

•

Delete

: delete the e-mail.

•

Add to filtering list

: add the sender’s e-mail address or subject to the Block list to rej ect e- ma ils from tha t addr ess or containing that subject.

Menu functions

Messages

(Menu 5)

Page 63

X828.book Page 60 Monday, July 3, 2006 3:50 PM

Menu functions

•

Cut address

addresses, or phone numbers from the e-mail.

•

Attached items

from the e-mail to your phone’s memory.

•

Protection

being deleted.

•

Details

My folders

Use this menu to create new folders and organise your messages.

Creating a new folder

1. Press <

2. Enter a folder name, press < and select Ok.

Using folder options

On the folder list, press < access the following options:

•

Open

•

Create folder

•

Rename folder

name.

•

Delete

: extract URLs, e-mail

: save the attached files

: protect the e-mail from

: access the e-mail properties.

(Menu 5.2.6)

Yes

Options

: open the selected folder.

: add a new folder.

: change the folder

: delete the selected folder.

> to

Templates

Use this menu to make and use templates of frequently used messages.

Text message templates

You can create SMS templates with the sentences you use frequently so that you can retrieve and insert them when composing an SMS message.

Creating a template

1. Select an empty location.

2. Enter a message, press < select Ok.

Using template options

From the template list, press < access the following options:

•

Edit

•

Send message

message using the selected template.

•

Delete

•

Add new

(Menu 5.3)

(Menu 5.3.1)

Options

: edit the selected template.

: create and send a new

: delete the selected template.

: add a new template.

> and

> to

Page 64

X828.book Page 61 Monday, July 3, 2006 3:50 PM

Multimedia message templates

5.3.2)

(Menu

You can access embedded MMS templates or ones you have saved so that you can use them in composing an MMS message.

From the template list, press <

Options

> to

access the following options:

•

View

: open the selected template.

•

Edit

: edit the template.

•

Send message

: create and send a new

message.

•

Delete

: delete the selected template or all templates, except for the embedded ones.

Delete all

(Menu 5.4)

Use this menu to delete messages in each message folder all at once.

1. Press [ ] to select the message folders to be cleared.

Pressing the key twice displays the message types so that you can specify the ones to be cleared.

2. Press <

Delete

3. Press [ ] to select the check box to delete protected messages, and then press <

Yes

4. Press <

Settings

Yes

> to confirm the deletion.

(Menu 5.5)

Use this menu to set up various options for using the messaging service.

Text in the phone's current language can only be converted into graphics. For example, if Chinese is the current language, then only Chinese words can be converted to the matching graphics.

Text messages

(Menu 5.5.1)

You can configure SMS settings.

•

Sending options

: set up the options for

sending SMS messages:

Send read receipt

: send a read-reply

request along with your message.

Send delivery receipt

: set the network to inform you when your messages have been delivered.

Bearer selection GPRS preferred

: select either

GSM

, depending on your

network.

Menu functions

Messages

(Menu 5)

Page 65

X828.book Page 62 Monday, July 3, 2006 3:50 PM

Menu functions

•

Receiving options

view mode for displaying received SMS messages on your phone.The phone will convert message text to 3D vivid graphics and display it in 3D vivid view mode.

This option is available only when the message consists of a single page.

•

Block list

from which you want to reject messages.

•

Current profile

profile.

•

Profile settings

each profile.

Service centre

number of your SMS server.

Default destination

destination. It will be displayed on the first field on the Recipients field.

Default type

type. The network can convert the messages into the selected format.

Default validity

your messages are stored in the SMS server.

Setting name

: store the phone numbers

: activate 3D vivid

: select an SMS setting

: set the properties of

: store or change the

: enter the default

: set the default message

: set the length of time

: enter a profile name.

Multimedia messages

You can configure MMS settings.

•

Sending options

sending MMS messages:

Delivery report

inform you when your messages have been delivered.

Hide address

hidden from the recipient’s phone.

Read reply

along with your messages.

Priority

messages.

Expiry date

messages are stored in the MMS server.

Delivery time

messages are sent.

Outgoing message size

maximum size of attached items allowed for messages.

•

Retrieving options

for receiving MMS messages:

Reject unknown senders

messages from unknown senders.

Allow adverts

: send a read-reply request

: set the priority level of

: set the length of time

(Menu 5.5.2)

: set up the options for

: set the network to

: set your address to be

: set a time delay before

: select a

: set up the options

: reject

: accept advertisements.

Page 66

X828.book Page 63 Monday, July 3, 2006 3:50 PM

Allow information

: accept information

messages.

Allow reports

: set the network to inform the sender when a message has been delivered to you.

Recep. in home network

: determine if your phone retrieves new messages automatically when you are in your home service area.

Reception when abroad

: determine if your phone retrieves new messages automatically when you are roaming on another network.

Reception within home network or abroad has the following options:

Automatic

: the phone automatically

retrieves messages from the server.

Reject

: the phone rejects all

messages.

Manual

: the phone displays

notifications. Use the

Retrieve

to manually download new messages.

•

Multimedia message profiles

connection profile to be used for MMS. You can also create or edit a profile.



p. 91

option

: select a

Emails

(Menu 5.5.3)

You can configure default e-mail settings.

You cannot change e-mail profile and account settings while an e-mail is being sent or retrieved.

•

Sending options

: set up the options for

sending e-mails:

Send copy to self

: send a copy of your

e-mails to your e-mail account.

Send delivery receipt

: set the network to inform you when your e-mails have been delivered.

Send read receipt

: send a read-reply

request along with e-mails.

Reply-To address

: set an e-mail address to receive read-reply messages from recipients.

Priority

: select the priority level of e-

mails.

Add signature

: attach your name, phone number, a simple memo, or a tag line to your e-mails.

Edit name

: edit the name in your

signature.

Menu functions

Messages

(Menu 5)

Page 67

X828.book Page 64 Monday, July 3, 2006 3:50 PM

Menu functions

Edit number

your signature.

Edit note

signature.

•

Receiving options

for receiving e-mails:

Check interval

the phone checks the server for incoming e-mails. If you select the

Check for new email

receive new e-mails manually.

Read reply

the phone sends a read-reply for incoming e-mails. If you select

reminder

read-reply.

Reject if larger than

maximum size for incoming e-mails. Your phone will reject e-mails that exceed the specified size.

Download method

phone downloads e-mail headers only or e-mail headers and bodies both.

Leave copy of messages on server

leave copies of e-mails on the e-mail server after retrieving.

: edit the phone number in

: edit the tag line in your

: set up the options

: determine how often

Do not notify

option to

: determine whether or not

, the phone asks you to send a

: determine the

: set whether the

, use

•

Block list

subjects you want to reject.

•

Email accounts

account and select an account to be used.

Current account Account settings

accounts using different e-mail servers. Set the options for each account:

Account name

currently selected account.

User name

Email address

address.

SMTP server

host name of the outgoing e-mail server.

SMTP port

number.

Connect to POP3(IMAP4) server first

server before connecting to the SMTP

server to send e-mails.

: specify e-mail addresses or

: set up an e-mail

: select an account.

: configure e-mail

: enter a name for the

: enter a user name.

: enter your e-mail

: enter the IP address or

: enter the SMTP port

: connect to the POP3 or IMAP4

Page 68

X828.book Page 65 Monday, July 3, 2006 3:50 PM

Protocol type

: select the protocol for the incoming e-mail server. The remaining options depend on the protocol type setting.

When the protocol type is

POP3 server:

enter the IP address or

POP3

host name of the server that receives your e-mail.

POP3 port

: enter the POP3 port

number.

User ID

Password

Use SMTP authentication

: enter the POP3 user name.

: enter the POP3 password.

: enable SMTP authentication, which requires the user to login before sending e-mails.

Same as POP3

: select if you want the SMTP server to have the same parameters as the POP3 server.

SMTP user ID

: enter the SMTP user

name.

SMTP password

: enter the SMTP

password.

APOP login

: connect to the server by

using the APOP login scheme.

Secure connection

: use a secure

connection for the e-mail service.

When the protocol type is

IMAP4 server

: enter the IP address or

IMAP4

host name of the server that receives your e-mail.

IMAP4 port

: enter the IMAP4 port

number.

User ID

Password

Use SMTP authentication

: enter the IMAP4 user name.

: enter the IMAP4 password.

: enable SMTP authentication, which requires the user to login before sending emails.

Same as IMAP4

: select if you want the SMTP server to have the same parameters as the IMAP4 server.

SMTP user ID

: enter the SMTP user

name.

SMTP password

: enter the SMTP

password.

Include attachments

: select this option to receive attachments with e-mails.

Menu functions

Messages

(Menu 5)

Page 69

X828.book Page 66 Monday, July 3, 2006 3:50 PM

Menu functions

Email retrieval limit(1-100)

number of headers you will retrieve from the server.

Secure connection

connection for e-mail service.

•

Email profile

profile to be used for e-mail services. You can also create or edit a profile.p. 91

Push messages

You can change the settings for receiving push messages from the wireless web server.

•

Receive

push messages. If you select the phone will not accept messages from the specified addresses on the Black list.

•

Black list

addresses.

: set how your phone receives

: manage blocked server

Broadcast messages

You can change the settings for receiving CB messages.

•

Receive

or not.

: select to receive CB messages,

: use a secured

: select a connection

(Menu 5.5.4)

(Menu 5.5.5)

: set the

Black list

•

Channel list

which you wish to receive CB messages. Please contact your service provider for further details.

•

Language

languages in which CB messages display.

Memory status

Use this menu to view the amount of memory currently in use in each folder.

My files

The

My files

images, videos, music files, and sound files stored in the phone’s memory.

To access this menu, press < mode and select

Depending on the file format or properties, your phone may not support some media files.

: indicate the channels from

: select the preferred

(Menu 5.6)

(Menu 6)

menu allows you to access

My files

> in Idle

Page 70

X828.book Page 67 Monday, July 3, 2006 3:50 PM

Tips for Digital Rights Management

As a result of the Digital Rights Management (DRM) system, some of the media items you download from the Internet or receive by MMS may require a license key to access them.

You can acquire the key from the website which owns the rights to the content; use the

Activate key

Note the following icons on the list:

• : Forwardable item with a valid key.

• : Forwardable item without a valid

• : Unforwardable item with a valid

• : Unforwardable item without a valid

Images

This menu displays photos you have taken and images you have downloaded, received in messages, or imported from your computer.

option.

key.

(Menu 6.1)

Viewing an image

1. Select an image folder.

2. Select an image. You can view the enlarged image by pressing [Volume up]. To zoom in or out, press [Volume]. Press the Navigation keys to scroll through the image.

Viewing a slide show

You can view your photos as a slide show, a sequential presentation of each photo in the current folder.

1. Select

2. Press <

3. Select an interval option. The slide show

4. Press <

show

begins.

My photos

Options

Stop

> and select

> to stop the slide show.

Slide

Using image options

While viewing an image, press < to access the following options:

•

Full screen view

the full screen.

•

List

: return to the image list.

: View the image on

Options

Menu functions

My files

(Menu 6)

Page 71

X828.book Page 68 Monday, July 3, 2006 3:50 PM

Menu functions

•

Send via

or Bluetooth.

•

Set as

the display or as a caller ID image for a Phonebook entry.

•

Edit

editor if it is a photo taken by the camera on the phone.p. 43

•

Activate key

the key for the selected DRM file expires.

•

Delete

•

Rename

•

Move to Favourite images/Move to Photos/Move to Downloaded images

•

Bluetooth visibility

the files you want with other Bluetooth devices.

•

Protection

deleted.

•

Print via Bluetooth

a bluetooth-compatible devices. Some printers may not be compatible with the phone.

•

Details

: send the file via MMS, e-mail,

: set the image as wallpaper for

: edit the image using the Image

: get a licence key when

: delete the file.

: change the file name.

: move the file to another folder.

: share the file or

: protect the file from being

: print the image via

: access the file properties.

•

Key management

: manage the license

keys you have acquired.

Videos

(Menu 6.2)

This menu displays video clips you have recorded, downloaded, received in messages, or imported from your computer.

Video clips recorded on other devices, such as camcorders, may not play correctly.

Playing a video clip

1. Select a video folder.

2. Select a video clip.

During playback, use the following keys:

Key Function

Pauses or resumes playback.

Left Moves backward in a file when

held down. Moves back to the previous file.

Right Skips forward in a file when held

down. Skips to the next file.

Up Opens the video list.

Volume Adjusts the volume.

Page 72

X828.book Page 69 Monday, July 3, 2006 3:50 PM

Key Function

Down Stops playback.

Using video options

After playback, press <

Options

> to access

the following options:

•

Full screen

: play the video clip on the

full screen.

•

List

: return to the video list.

•

Send via

: send the file via MMS, e-mail,

or Bluetooth.

•

Set as

: set the video clip, if saved as a 3GP file, as wallpaper for the display or a caller ID image for a phonebook entry.

•

Activate key

: get a licence key when

the key for the selected DRM file expires.

•

Delete

: delete the file.

•

Rename

•

Move to Favourite videos/Move to

: change the file name.

Video clips/Move to Downloaded videos

•

: move the file to another folder.

Bluetooth visibility

: share the file or the files you want with other Bluetooth devices.

•

Protection

: protect the file from being

deleted.

•

Details

•

: access the file properties.

Key management

: manage the licence

keys you have acquired.

Music

(Menu 6.3)

This menu displays MP3 files you have downloaded or imported from your computer.

Select a file. The music player opens.



p. 40

When you play a file from this menu, without first adding it to the play list in the music player, background play is not supported.

Sounds

(Menu 6.4)

This menu displays voice memos you have recorded, and sound files you have downloaded, received in messages, or imported from your computer.

Playing a sound clip

1. Select a sound folder.

2. Select a sound clip. For a voice memo, see

Voice recorder

.p. 43

Menu functions

My files

(Menu 6)

Page 73

X828.book Page 70 Monday, July 3, 2006 3:50 PM

Menu functions

Using sound options

While playing a sound file, press < to access the following options:

•

List

: return to the sound list.

•

Send via

: send the file via MMS, e-mail,

or Bluetooth.

•

Set as

: set the sound as your call ringtone or a ringtone for a Phonebook entry.

•

Activate key

: get a licence key when

the key for the selected DRM file expires.

•

Delete

: delete the file.

•

Rename

•

Move to Favourite sounds/Move to

: change the file name.

Voice recorder files/Move to Downloaded sounds

: move the file to

another folder.

•

Bluetooth visibility

: share the file or the files you want with other Bluetooth devices.

•

Protection

: protect the file from being

deleted.

•

Details

: access the file properties.

•

Key management

: manage the licence

keys you have acquired.

Options

Other files

Use this menu to view various document

(Menu 6.5)

files and files stored in the phone’s memory without corruption. Available file formats are DOC, XLS, PPT, PDF, and TXT.

Viewing a file

Select a file. Picsel File Viewer runs to open the document.

• Depending on the file size or memory capacity of Picsel File Viewer, a file may not open properly.

• If a document file contains languages unsupported by Picsel File Viewer, the content of the document will not display correctly.

Use the following keys to view the document:

Key Function

Up/Down/

Pans around the page.

Left/Right

Volume up/1Zooms in.

Volume down/

Zooms out.

Page 74

X828.book Page 71 Monday, July 3, 2006 3:50 PM

Key Function

Fits the document to the page size.

Returns to the first page.

Returns to the previous page.

Rotates the document.

Moves to the next page.

Moves to the last page.

Changes the display to Full screen view or Normal screen view.

Using document options

While viewing a document, press <

Options

> or < > to access the following

options:

•

Full screen view/Normal view

change the view mode.

•

Zoom

: zoom in or out.

•

Fit to

: fit the document to the page size,

screen width, or screen height.

•

Go to

: move to another page of the

document.

•

Rotate

•

: rotate the document.

Screen panning/Normal panning

change the panning mode to by screen or by preset pixel.

•

Hide controller/Show controller

or display the shortcut tool bar in Full screen view.

•

Send via

: send the file via MMS, e-mail,

or Bluetooth.

•

Delete

: delete the selected file.

•

Rename

•

Bluetooth visibility

: change the file name.

: share the file or the files you want with other Bluetooth devices.

•

Protection

: protect the file from being

deleted.

•

Details

: access the file properties.

•

Shortcuts

: view the functions of the

keys you can use in Picsel File Viewer.

Menu functions

: hide

My files

(Menu 6)

Page 75

X828.book Page 72 Monday, July 3, 2006 3:50 PM

Menu functions

Memory status

Use this menu to view memory information for media items in the phone’s memory. For the phone’s memory, press [Left] or [Right] to view the memory status by size or number of items.

Calendar

The

Calendar

track of your schedule.

To access this menu, press < mode and select

(Menu 6.6)

(Menu 7)

menu enables you to keep

Calendar

> in Idle

Consulting the calendar

When you enter the calendar in Month view appears with today’s date indicated by a gray box.

Calendar

menu, the

Selecting a day

• Press [Left] or [Right] to move by day.

• Press [Up] or [Down] to move by week.

• Press [Volume] to move by month.

At the bottom right of the screen, the calendar displays the date from the lunar calendar. In addition, it displays which of the 24 solar divisions corresponding with the day. You can also view national holidays in Day view.

Using calendar options

Press <

Options

options:

•

View by

calendar.p. 75

•

Create

•

Go to

specific date.

•

Event list

•

Delete

calendar by using various deleting options.

•

Missed alarm events

whose alarms you have missed.

•

Memory status

information for the items stored on the calendar.

> to access the following

: change the view mode of the

: add a new item.next section

: select today’s date or enter a

: sort items by type of item.

: delete the items stored on the

You can delete recurring events in Day view only.

: view items

: access memory

Page 76

X828.book Page 73 Monday, July 3, 2006 3:50 PM

Creating an item

You can store appointments, anniversaries, memos, and tasks on the calendar. More than one item per day can be stored.

Entering a new appointment

1. Select a date on the calendar.

2. Press <

3. Enter information or change the settings:

Options

Appointment

•

Subject

appointment.

•

Details

•

Start date

the starting date and time for the appointment.

•

AM/PM

time format.

•

End date

ending date and time for the appointment.

•

AM/PM

time format.

•

Location

the location of the appointment.

> and select

: enter a title for the

: enter appointment details.

and

Start time

: select AM or PM in 12-hour

and

End time

: select AM or PM in 12-hour

: enter information about

: enter the

Create →

: enter

•

Alarm

: set an alarm for the

appointment.

•

Before

: set how long before the appointment the alarm is to alert you.

•

Alarm tone

•

Repeat

recur and select a repeat unit.

•

Until

appointment will recur.

4. Press <

Save

: select an alarm tone.

: set the appointment to

: set the ending date, if the

> to save the appointment.

Entering a new anniversary

1. Select a date on the calendar.

2. Press <

3. Enter information or change the settings:

Options

Anniversary

•

Occasion

the anniversary.

•

Date

•

Alarm

anniversary.

•

Before

anniversary the alarm is to alert you.

•

Alarm time

alarm to ring.

> and select

: enter information about

: enter the date.

: select to set an alarm for the

: set how long before the

: enter the time for the

Create →

Menu functions

Calendar

(Menu 7)

Page 77

X828.book Page 74 Monday, July 3, 2006 3:50 PM

Menu functions

•

AM/PM

: select AM or PM in 12-hour

time format.

•

Alarm tone

•

Repeat every year

to remind you of the anniversary every year.

4. Press <

Entering a memo

1. Select a date on the calendar.

2. Press <

Memo

3. Enter a memo, press < select

Save

Entering a task

1. Select a date on the calendar.

2. Press <

Task

3. Enter information or change the settings:

•

Task

task.

•

Start date

•

Due date

•

Select priority

level.

4. Press <

: select an alarm tone.

: set the phone

Save

> to save the anniversary.

Options

Save

> and select

: enter information about the

: enter the starting date.

: enter the ending date.

: select a priority

> to save the task.

Create →

Options

Create →

> and

Viewing an item

Once you have scheduled things, the item icons and the number of items for a specific day appears at the bottom of the calendar.

• Appointment • Anniversary

• Task • Memo

• Festival

Accessing an item

1. Select a date on the calendar to display the items for the day.

2. Select an item to view its details.

3. Press [Left] or [Right] to access the other items scheduled for the selected day.

Using options

While viewing an item, press < access the following options:

•

Edit

: edit the item.

•

Create

: add a new item.

•

Send via

e-mail, or Bluetooth.

•

View by

calendar.

•

Delete

: send the item via SMS, MMS,

: change the view mode of the

: delete the item.

Options

> to

Page 78

X828.book Page 75 Monday, July 3, 2006 3:50 PM

•

Memory status

: access memory information for the items stored on the calendar.

Viewing an item in a different mode

You can change the calendar display to Day view or Week view. Press < select

View by →

a view mode.

Options

> and

Day view

You can view items for the selected date. Select an item to view its details.

The following icons may display to indicate the item status:

• Alarm set

• Recurring time

• Task priority (Red: high, Blue: normal, Grey: low)

• Completed task

Week view

You can view items for the selected week. A cell on the timetable indicates the presence of a schedule item. Select a cell in the day you want.

Camera

(Menu 8)

You can use the camera module embedded in your phone to take photos and record videos.

To access this menu, press < mode and select

Camera

> in Idle

, or press and hold

[].

• Do not take photos of people without their permission.

• Do not take photos in a place where cameras are not allowed.

• Do not take photos in a place where you may interfere with another person’s privacy.

Taking a photo

You can take photos in various modes. The camera produces JPEG photos.

When you take a photo in direct sunlight or in bright conditions, shadows may appear on the photo.

1. Access the hold [] to turn on the camera.

2. Make any desired adjustments.

• Press < > to access camera

Camera

menu or press and

options.next section

Menu functions

Camera

(Menu 8)

Page 79

X828.book Page 76 Monday, July 3, 2006 3:50 PM

Menu functions

• Use the keypad to change the camera settings or switch to other modes.



p. 77

3. Press [ ] or [] to take a photo. The photo is saved in the

To Press

access photo options

delete the photo [C] and then

return to Capture mode

My photos

Options



p. 78

Yes

[] or <

Preview

folder.

Using camera options in Capture mode

In Capture mode, press < > to access the following options:

•

Record video

•

Shooting mode

following modes:

Single shot

mode. You can select whether or not the camera automatically saves a photo.

: switch to Record mode.

: take a photo in the

: take a photo in Normal

Multi-shot

You can select the number of photos the camera will take and the shooting speed.

Mosaic shot

save them in one frame. You can select the layout.

•

Effects

a special effect.

•

Frames

•

Timer

camera takes a photo.

•

Go to My photos photos

•

Settings

taking a photo.

Size Quality Viewfinder Scene programs

use Night shot mede.

Shutter sound

you hear when you press the shutter release, [].

Zoom sound

zooming on or off.

: take a series of action stills.

: take several stills and

: change the colour tone or apply

: apply a decorative frame.

: set a time delay before the

folder.

: access the

: change the default settings for

: select an image size.

: select an image quality setting.

: select a preview screen.

: set whether or not to

: select the sound that

: turn the sound effect for

Page 80

X828.book Page 77 Monday, July 3, 2006 3:50 PM

Brightness sound

effect for brightness adjustment on or off.

White balance

balance of the image. You can make your photo appear warmer or cooler.

ISO

: change the ISO setting, which controls the sensitivity of your camera. For low light situations, select a higher ISO number. The higher the ISO number, the faster the camera shutter functions and the more sensitive the camera is to light. Higher ISO settings may bring some distortion to an image.

•

Camera shortcuts

of the keys you can use in Capture mode.

: turn the sound

: adjust the colour

: view the functions

Using the keypad in Capture mode

You can use the keypad to customise your camera settings in Capture mode.

Key Function

Left/Right Adjusts the brightness.

Up/Down Zooms in or out.

Key Function

Volume up Flips the image vertically.

Volume down

Flips the image horizontally.

Switches to Record mode.



p. 78

Changes the image size.

Changes the image quality.

Changes the shooting mode.

Changes the colour tone or applies a special effect.

Changes the white balance.

Selects a decorative frame.

Sets the timer.

Changes the ISO setting.

Goes to the folder.

Changes the preview screen.

Switch to Night shot mode.

My photos

Menu functions

Camera

(Menu 8)

Page 81

X828.book Page 78 Monday, July 3, 2006 3:50 PM

Menu functions

Using photo options

After saving a photo, press < access the following options:

•

View

: access one of the multi-shot

photos.

•

Viewfinder

•

Send via

or Bluetooth.

•

Set as

the display or as a caller ID image for a Phonebook entry.

•

Edit

editor.p. 43

•

Delete

•

Rename

•

Go to My photos photos

•

Protection

deleted.

•

Print via Bluetooth

a Bluetooth-compatible printer. Some printers may not be compatible with the phone.

•

Details

: return to Capture mode.

: send the file via MMS, e-mail,

: set the photo as wallpaper for

: edit the photo using the Image

: delete the file.

: change the file name.

folder.p. 67

: protect the file from being

: access the file properties.

Options

: access the

: print the photo via

> to

Recording a video

You can record a video of what is displayed on the camera screen and save it.

1. In Capture mode, press [1].

2. Make any desired adjustments.

• Press < > to access camera options.next section

• Use the keypad to change the camera settings or switch to other modes.



p. 79

3. Press [ ] or [ ] to start recording.

4. Press [ ], < > or [ ] to stop recording. The video is automatically saved in the

To Press

play back the video clip [ ].

access video options <

delete the video clip [C] and then

return to Record mode <

My video clips



folder.

Options

p. 80

Yes

Preview

Page 82

X828.book Page 79 Monday, July 3, 2006 3:50 PM

Using camera options in Record mode

In Record mode, press < > to access the following options:

•

Take photo

•

Effects

: switch to Capture mode.

: change the colour tone or apply

a special effect.

•

Timer

: set a time delay before the

camera starts recording.

•

Go to My video clips video clips

•

Settings

folder.

: change the following settings

: access the

for recording a video:

Recording mode

: select a video

recording mode. Select

Normal

to record a video within the limit of the currently available memory. The video clip is saved in MP4 format.

Select

Limit for multimedia

messages/wallpaper

to record a video suitable for messaging or for setting as wallpaper. The video clip is saved in 3GP format.

Size

: select a frame size.

Quality

: select an image quality.

Viewfinder Record audio

: select a preview screen.

: record audio with a video

clip.

Zoom sound

: turn the sound effect for

zooming on or off.

Brightness sound

: turn the sound effect for brightness adjustment on or off.

White balance

: adjust the colour balance of the image. You can make your video appear warmer or cooler.

•

Camcorder shortcuts

: view the functions of the keys you can use in Record mode.

Using the keypad in Record mode

You can use the keypad to customise your camera settings in Record mode:

Key Function

Left/Right Adjusts the brightness.

Up/Down Zooms in or out.

Volume up Flips the image vertically.

Menu functions

Camera

(Menu 8)

Page 83

X828.book Page 80 Monday, July 3, 2006 3:50 PM

Menu functions

Key Function

Volume down

Using video options

After saving a video clip, press < to access the following options:

Flips the image horizontally.

Switches to Capture mode.



p. 75

Changes the frame size.

Changes the image quality.

Changes the video recording mode.

Changes the colour tone or applies a special effect.

Changes the white balance.

Mutes or unmutes audio.

Sets the timer.

Goes to the folder.

Changes the preview screen.

My video clips

Options

•

Full screen

full screen.

•

Record another

mode.

•

Send via

or Bluetooth.

•

Set as

3GP file, as wallpaper for the display or a caller ID image for a phonebook entry.

•

Delete

•

Rename

•

Go to My video clips video clips

•

Protection

deleted.

•

Details

Settings

The

Settings

various setting options to customise the phone to your preferences and needs. You can also reset the settings to their default status.

To access this menu, press < mode and select

: play the video clip on the

: return to Record

: send the file via MMS, e-mail,

: set the video clip, if saved as a

: delete the file.

: change the file name.

folder.p. 68

: protect the file from being

: access the file properties.

(Menu 9)

menu provides you with

Settings

: access the

> in Idle

Page 84

X828.book Page 81 Monday, July 3, 2006 3:50 PM

Time and date

(Menu 9.1)

Use this menu to change the time and date displayed on your phone. Before setting the time and date, specify your time zone in the

World clock

•

Set time

•

AM/PM

menu.p. 46

: enter the current time.

: select AM or PM in 12-hour

time format.

•

Time format

•

Set date

•

Date format

•

Auto update

: select a time format.

: enter the current date.

: select the date format.

: activates the auto time update feature. Your phone will read the MCC (Mobile Country Code) from the network and automatically update the current time for the country that you are in when you within a country.

Time information may not be updated when you move to one time zone to another within a country.

Phone settings

(Menu 9.2)

Many different features of your phone’s system can be customised to suit your preferences.

Language

(Menu 9.2.1)

Use this menu to change the settings for text input mode.

•

Language

: you can change the

language of the display.

•

Fuzzy pinyin pairs

: you can select Mohu pinyin pairs so that you can easily enter characters that are similar in phonetic spelling.

Greeting message

(Menu 9.2.2)

Use this menu to enter the greeting that is displayed briefly when the phone is switched on.

Shortcuts

(Menu 9.2.3)

You can use the Navigation keys as shortcuts to access specific menus directly from Idle mode. Use this menu to assign a shortcut to a key.

Menu functions

Settings

(Menu 9)

Page 85

X828.book Page 82 Monday, July 3, 2006 3:50 PM

Menu functions

Assigning a shortcut menu

1. Select a key to be used as a shortcut key.

2. Select the menu to be assigned to the key.

Using shortcut options

Press <

Options

options:

•

Change

menu.

•

Remove

assignment to the selected key.

•

Remove all

assignments.

Auto keypad lock

Use this menu to set the phone to lock the keypad automatically when the display turns off after a specified time.

Volume key

Use this menu to set whether the phone mutes the call ringer or rejects a call if you press and hold [Volume] when a call comes in.

> to access the following

: assign or change a shortcut

: deactivate the shortcut

: deactivate all shortcut

(Menu 9.2.4)

(Menu 9.2.5)

Extra settings

You can turn the automatic redialling or answering feature on or off.

•

Auto redial

to ten attempts to redial a phone number after an unsuccessful call.

•

Anykey answer

call by pressing any key, except for [ ] and <

Offline mode

Use this menu to switch the phone to Offline mode or back to Online mode.

Display settings

Use this menu to change settings for the display.

Wallpaper

You can set up the idle screen on the display.

•

Wallpaper image

video clip to be displayed on the display.

•

Text position

you don’t want to display text in Idle mode, select

•

Text mode

(Menu 9.2.6)

: set the phone to make up

: answer an incoming

Reject

(Menu 9.2.7)

(Menu 9.3)

(Menu 9.3.1)

: select an image or

: select a text position. If

Off

: select a font style.

Page 86

X828.book Page 83 Monday, July 3, 2006 3:50 PM

•

Text colour

•

Graphic logo

: select a font colour.

: set the phone to display a graphic icon instead of the service provider’s logo on the idle screen. This is only available if a graphic icon has been received in a message.

Skin

(Menu 9.3.2)

You can select a skin colour pattern for Menu mode.

Brightness

(Menu 9.3.3)

You can adjust the brightness of the display for varying lighting conditions.

Dialling display

(Menu 9.3.4)

Use this menu to select a font colour for the numbers entered while dialling.

Show caller information

(Menu 9.3.5)

Use this menu to set the phone to display missed call notifications with the most recently missed caller’s information.

TV-out settings

(Menu 9.3.6)

Use this menu to select a video system for a TV.

Sound settings

(Menu 9.4)

Use this menu to customise various sound settings.

Incoming call

(Menu 9.4.1)

Use this menu to change the sound settings for incoming calls.

•

Ringtone

: select a ringtone to be used

for the call ringer.

•

Volume

•

Alert type

: select a ringtone volume.

: specify how you are to be

informed of incoming calls.

Keypad tone

(Menu 9.4.2)

Use this menu to select the tone that the phone sounds when you press a key.

You can adjust the keypad tone volume

Volume

using [

Message tone

] in Idle mode.

(Menu 9.4.3)

Use this menu to change the sound settings for incoming SMS messages, MMS messages, e-mails, and CB messages individually.

•

Tone

: select one of several message

tones.

Menu functions

Settings

(Menu 9)

Page 87

X828.book Page 84 Monday, July 3, 2006 3:50 PM

Menu functions

•

Alert type

informed when a message comes in.

•

Repetition

informs you of a new message.

Power on/off

Use this menu to select the melody that the phone sounds when it is switched on or off.

Ontime alarm

Use this menu to set the phone to sound an alert every hour on the hour.

Silent mode

Use this menu to set how the phone acts to alert you to a specific event while in Silent mode.

Extra tones

Use this menu to customise additional tones for the phone.

•

Minute minder

every minute during an outgoing call to keep you informed of the length of your call.

•

Connection tone

beep when an outgoing call connects to the system.

: specify how you are to be

: specify how often the phone

(Menu 9.4.4)

(Menu 9.4.5)

(Menu 9.4.6)

(Menu 9.4.7)

: set the phone to beep

: set the phone to

•

Alerts on call

when you receive a new message or when the time for an alarm comes during a call.

•

Indicative tone

when a pop-up window displays.

Light settings

Use this menu to change settings for the backlight.

Backlight time

You can select the length of time the backlight or display stays on.

•

Main display normal

of time the backlight stays on.

•

Main display dim

time the display stays on in Dim mode after the backlight turns off. After a specified time, the display turns off.

Keypad light

You can set how the phone controls the use of the keypad light. Select one of the following options in the

•

Any time

used.

: set the phone to beep

(Menu 9.5)

(Menu 9.5.1)

: select the length

: select the length of

(Menu 9.5.2)

Use at

line.

: the keypad light is always

Page 88

X828.book Page 85 Monday, July 3, 2006 3:50 PM

•

Night time

: the keypad light is used

only between 5:00 PM and 9:00 AM.

•

Custom time

: specify the time period

that the keypad light is used.

Network services

(Menu 9.6)

Use this menu to access network services. Please contact your service provider to check their availability and subscribe to them, if you wish.

Call diverting

(Menu 9.6.1)

This network service reroutes incoming calls to a phone number that you specify.

1. Select a call diverting option:

•

Divert always

•

Busy

: divert calls when you are on

: divert all calls.

another call.

•No

: divert calls when you do

not answer the phone.

•

Unreachable

: divert calls when you are not in an area covered by your service provider or when your phone is switched off.

•

Cancel all

: cancel all call diverting

options.

2. Select the type of calls to be diverted.

3. Select

4. Move to the

Activate

diverting, select

Divert to

. To deactivate call

Deactivate

line.

5. Enter the number to which calls are to be diverted.

6. If you selected

Seconds

No reply

, move to the

line and select the length of time the network delays before diverting a call.

7. Press <

Call barring

Select

(Menu 9.6.2)

This network service allows you to restrict your calls.

1. Select a call barring option:

•

All outgoing calls

: prohibit all

outgoing calls.

•

International

: prohibit international

calls.

•

International except home

: only allow calls to numbers within the current country when you are abroad, and to your home country.

•

All incoming calls

: prohibit

incoming calls.

Menu functions

Settings

(Menu 9)

Page 89

X828.book Page 86 Monday, July 3, 2006 3:50 PM

Menu functions

•

Incoming while abroad

incoming calls when you use your phone outside of your home country.

•

Cancel all

: cancel all call barring settings, allowing calls to be sent and received normally.

•

Change barring password

the call barring password obtained from your service provider.

2. Select the type of calls to be barred.

3. Select

Activate

barring, select

. To deactivate call

Deactivate

4. Enter the call barring password supplied by your service provider and press <

Select

Call waiting

(Menu 9.6.3)

This network service informs you when someone is trying to reach you while you are on another call.

1. Select the type of calls to which call waiting option will apply.

2. Select

Activate

waiting, select

. To deactivate call

Deactivate

: prohibit

: change

Network selection

(Menu 9.6.4)

This network service allows you to either automatically or manually select the network to be used while roaming outside of your home area. You can select a network other than your home network only if there is a valid roaming agreement between the two.

Caller ID

(Menu 9.6.5)

This network service allows you to prevent your phone number from being displayed on the phone of the person being called. If you select

Default

, the phone will use the

default setting provided by the network.

Some networks may not allow you to change this setting.

Voice mail server

(Menu 9.6.6)

Use this menu to store the number of the voicemail server and access your voicemails.

You must store the voicemail server number before accessing the server. Your service provider can give you the number.

•

Connect to voice server

: connect to the voicemail server to listen to your messages.

Page 90

X828.book Page 87 Monday, July 3, 2006 3:50 PM

•

Voice server number

: enter the

voicemail server number.

Closed user group

(Menu 9.6.7)

Use this menu to set incoming and outgoing calls to be restricted to a selected user group. For details about how to create a closed user group (CUG), contact your service provider.

•

Index list

: add, delete, or activate CUG

index numbers.

•

Outside access

: enable calls to numbers other than those in the closed user group. This feature depends on the nature of your CUG subscription.

•

Default group

: enable the default CUG, if you have set one with your service provider. When making a call, you are given the option of using your default CUG, instead of selecting one from the list.

Bluetooth

(Menu 9.7)

Using the Bluetooth feature, you can connect the phone wirelessly to other Bluetooth devices and exchange data with them, talk hands-free, or control the phone remotely.

Bluetooth technology allows free wireless connections between all Bluetooth-compliant devices within a range of 10 meters. Since the devices communicate using radio waves, they do not need to be in line of sight to each other.

• If there are obstacles between the devices, the operating distance may be reduced.

• It is recommended that you do not use the Bluetooth feature while using multimedia features, such as voice recorder, camera, and Music player, or vice versa, for better performance.

• Some devices may not be compatible with your phone.

Setting up the Bluetooth feature

The

Bluetooth

menu provides the following

options:

•

Activation

: activate or deactivate the

Bluetooth feature.

•

My devices

: search for connectable

Bluetooth devices.

•

My phone’s visibility

: allow other Bluetooth devices to search for your phone.

Menu functions

Settings

(Menu 9)

Page 91

X828.book Page 88 Monday, July 3, 2006 3:50 PM

Menu functions

•

My phone’s name

device name to your phone, which is then displayed on other devices.

•

Secure mode

asks for your confirmation when other devices access your data.

•

Bluetooth services

Bluetooth services.

Searching for and pairing with a Bluetooth device

1. From the Bluetooth setting options, select

My devices

2. Select

Search for new devices

After searching, a list of devices to which you can connect displays. The following icons indicate the type of device:

• Stereo headset • Printer

• Computer • PDA

• Mobile phone • Unknown

• Mono headset/Hands-free car kit

The colour of the icon indicates the status of the the device:

• Grey for unpaired devices

• Blue for paired devices

: assign a Bluetooth

: determine if the phone

: display available

device

• Orange for devices that are currently connected to your phone

3. Select a device.

4. Enter a Bluetooth PIN and press <OK>. This code is used just once and you do not need to memorise it.

When the owner of the other device enters the same code, pairing is complete.

Some devices, especially headsets or hands-free car kits, may have a fixed Bluetooth PIN, such as device has a code, you must enter it.

0000

. If the other

Using device options

From the device list, press <

Options

> to

access the following options:

•

Connect

: connect to a headset or

hands-free car kit.

•

Disconnect

: end the connection with

the connected device.

•

Browse files

: search for data from the device and import data directly to your phone.

•

Service list

: access the Bluetooth

service list of the device.

•

Rename

: rename the paired device.

Page 92

X828.book Page 89 Monday, July 3, 2006 3:50 PM

•

Authorise device/Unauthorised device

: determine whether or not the phone asks you to permit connection when other devices try to connect to your phone.

•

Delete

: remove the selected device or all devices from the list.

Sending data via Bluetooth

1. Activate the Bluetooth feature.

2. Select the application in which the item you want to send is stored.

3. Scroll to the item you want and press <

Options

4. Select Select

Send via → Bluetooth Search for new devices

The phone searches for devices within range and displays a list of available devices.

5. Select a device.

6. If necessary, enter the Bluetooth PIN needed for pairing and press <OK>.

Receiving data via Bluetooth

To receive data via Bluetooth, your phone’s Bluetooth feature must be active and its visibility must be enabled.

1. If an unauthorised Bluetooth device sends data to your phone, press <

Yes

to allow the device to access your phone.

2. Press <

Security

Yes

> to receive data.

(Menu 9.8)

Use this menu to protect the phone against unauthorised use by managing the several access codes of your phone and SIM card.

If you enter an incorrect PIN/PIN2 three times in succession, the SIM card is blocked. To unblock it, you need to enter your PUK/PUK2 (Personal Unblocking Key). The codes are supplied by your service provider.

PIN check

(Menu 9.8.1)

The 4- to 8-digit PIN (Personal Identification Number) protects your SIM card against unauthorised use. When this feature is enabled, the phone requires your PIN each time it is switched on.

Menu functions

Settings

(Menu 9)

Page 93

X828.book Page 90 Monday, July 3, 2006 3:50 PM

Menu functions

Change PIN code

Use this menu to change your PIN. The PIN check feature must be enabled to change the PIN.

Phone lock

Use this menu to lock the phone from unauthorised use. When this feature is enabled, you must enter a 4- to 8-digit phone password each time the phone is switched on.

The password is preset to change the password, use the

password

menu.

Change password

Use this menu to change your phone password.

Privacy

Use this menu to lock access to messages, files, or all menu functions on the phone, except for call functions. When a privacy option is enabled, you must enter the phone password to access the locked items or functions.

(Menu 9.8.5)

(Menu 9.8.2)

(Menu 9.8.3)

(Menu 9.8.4)

00000000

Change

. To

SIM lock

This menu allows your phone to work only with the current SIM card by assigning a SIM lock code. You must enter the SIM lock code to use a different SIM card.

Fixed dialling mode

If supported by your SIM card, Fixed Dialling Number (FDN) mode restricts your outgoing calls to a limited set of phone numbers. When this feature is enabled, you can make calls only to phone numbers stored on the SIM card.

Change PIN2 code

If supported by your SIM card, use this menu to change your current PIN2.

Connection settings

Use this menu to create and customise the profiles containing the settings for connecting your phone to the network.

(Menu 9.8.6)

(Menu 9.8.7)

(Menu 9.8.8)

(Menu 9.9)

Page 94

X828.book Page 91 Monday, July 3, 2006 3:50 PM

You need these settings to use the web browser or send MMS messages or e-mails.

Your phone is set up by default for connecting to the network. If you change the settings without first checking with your service provider, the web browser, MMS, and e-mail features may not work properly.

Creating a WAP profile

1. Press <

New

>. If a profile has already been saved, press < select

Add new connection

Options

> and .

2. Set profile parameters:

•

Profile name

•

Homepage URL

: enter a profile name.

: enter the URL address of the page to be used as your homepage.

•

Proxy

: activate or deactivate the

proxy server.

•

IP address

: enter the IP address of

the proxy server.

•

Port

: enter the port number of the

proxy server.

•

Linger time

: set a time period after which the network is disconnected if there has been no new data traffic in that time.

•

DNS

: activate or deactivate the DNS

(Domain Name Server) addresses.

•

DNS 1

and

DNS 2

: enter the primary

and secondary DNS addresses.

•

Bearer

: select the network bearer

type.

•

Advanced settings

: change the advanced options. Depending on the bearer setting, available options vary.

When the bearer is set to

APN

: enter the access point name.

: enter the login ID.

: enter the login

GPRS

password.

When the bearer is set to

Dial number

: enter the PPP phone

GSM

number.

: enter the login ID.

: enter the login

password.

Menu functions

Settings

(Menu 9)

Page 95

X828.book Page 92 Monday, July 3, 2006 3:50 PM

Solve problems

Data call type

data transmission.

3. Press <

Save

: select a call type for

> to save the profile.

Using profile options

Press <

Options

options:

•

Edit

•

Delete

•

Add new connection

profile.

Reset settings

Use this menu to reset the phone’s settings you have changed.

1. Press [ ] to select the setting categories to be reset.

2. Press <

3. Press <

4. Enter the phone password and press <OK>.

> to access the following

: edit the selected profile.

: delete the profile.

: add a new

(Menu 9.10)

Reset

Yes

> to confirm the reset.

The password is preset to You can change this password.



p. 90

00000000

Solve problems

Help and personal needs

To save the time and expense of an unnecessary service call, perform the simple checks in this section before contacting a service professional.

When you switch on your phone, the following messages may appear:

“Insert SIM”

• Be sure that the SIM card is correctly installed.

“Enter password”

• The automatic locking function has been enabled. You must enter the phone’s password before you can use the phone.

“Enter PIN”

• You are using your phone for the first time. You must enter the PIN supplied with the SIM card.

• The PIN check feature is enabled. Every

time the phone is switched on, the PIN has to be entered. To disable this feature, use the

PIN check

menu.

Page 96

X828.book Page 93 Monday, July 3, 2006 3:50 PM

“Enter PUK”

• The PIN has been entered incorrectly three times in succession, and the SIM card is now blocked. Enter the PUK supplied by your service provider.

“No service,” “Network failure,” or “Not done” displays

• The network connection has been lost. You may be in a weak signal area. Move and try again.

• You are trying to access an option for which you have no subscription with your service provider. Contact the service provider for further details.

You have entered a number but it was not dialled

• Be sure that you have pressed [ ].

• Be sure you have accessed the right cellular network.

• Be sure that you have not set an outgoing call barring option.

Your correspondent cannot reach you

• Be sure that your phone is switched on. ([ ] pressed for more than one second.)

• Be sure that you are accessing the correct cellular network.

• Be sure that you have not set an incoming call barring option.

Your correspondent cannot hear you speaking

• Be sure that you have switched on the microphone.

• Be sure that you are holding the phone close enough to your mouth. The microphone is located at the bottom of the phone.

The phone starts beeping and “Warning. Low battery” flashes on the display

• Your battery is insufficiently charged. Recharge the battery.

The audio quality of the call is poor

• Check the signal strength indicator on the display ( ). The number of bars indicates the signal strength from strong () to weak ().

• Try moving the phone slightly or moving closer to a window if you are in a building.

Page 97

X828.book Page 94 Monday, July 3, 2006 3:50 PM

Health and safety information

No number is dialled when you re-call a Phonebook entry

•Use the

• Re-store the number, if necessary.

The battery doesn’t charge properly or the phone sometimes turns itself off

• Wipe the charging contacts both on the

If the above guidelines do not help you to solve the problem, take note of:

• The model and serial numbers of your

•Your warranty details

• A clear description of the problem

Then contact your local dealer or Samsung after-sales service.

Contact list

number has been stored correctly.

phone and on the battery with a clean soft cloth.

phone

menu to ensure the

Health and safety information

SAR certification information

This phone meets European Union (EU) requirements concerning exposure to radio waves.

Your mobile phone is a radio transmitter and receiver. It is designed and manufactured to not exceed the limits for exposure to radiofrequency (RF) energy, as recommended by the EU Council. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines were developed by independent scientific organisations through the periodic and thorough evaluation of scientific studies. The limits include a substantial safety margin designed to ensure the safety of all persons, regardless of age and health.

The exposure standard for mobile phones employs a unit of measurement known as Specific Absorption Rate (SAR).

Page 98

X828.book Page 95 Monday, July 3, 2006 3:50 PM

The SAR limit recommended by the EU Council is 2.0

W/kg.

The highest SAR value for this model phone was 0.679 W/kg

SAR tests are conducted using standard operating positions with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a base station, the lower the power output of the phone.

* The SAR limit for mobile phones used by the public is

2.0 watts/kilogram (W/kg) averaged over ten grams of body tissue. The limit incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. The SAR values may vary, depending on national reporting requirements and the network band.

Precautions when using batteries

• Never use a charger or battery that is damaged in any way.

• Use the battery only for its intended purpose.

• If you use the phone near the network’s base station, it uses less power. Talk and standby time are greatly affected by the signal strength on the cellular network and the parameters set by the network operator.

• Battery charging time depends on the remaining battery charge, the type of battery, and the charger used. The battery can be charged and discharged hundreds of times, but it will gradually wear out. When the operation time is noticeably shorter than normal, it is time to buy a new battery.

• If left unused, a fully charged battery will discharge itself over time.

Page 99

X828.book Page 96 Monday, July 3, 2006 3:50 PM

Health and safety information

• Use only Samsung-approved batteries, and recharge your battery only with Samsung-approved chargers. Disconnect the charger from the power source when it is not in use. Do not leave the battery connected to a charger for more than a week, since overcharging may shorten its life.

• Extreme temperatures will affect the charging capacity of your battery: it may require cooling or warming first.

• Do not leave the battery in hot or cold places because the capacity and lifetime of the battery will be reduced. Try to keep the battery at room temperature. A phone with a hot or cold battery may not work temporarily, even when the battery is fully charged. Li-ion batteries are particularly affected by temperatures below 0°C (32°F).

• Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object like a coin, clip or pen causes a direct connection between the + and – terminals of the battery (metal strips on the battery). For example, do not carry a spare battery in a pocket or bag where the battery may contact metal objects. Short-circuiting the terminals may damage the battery or the object causing the short-circuiting.

• Dispose of used batteries in accordance with local regulations. Always recycle. Do not dispose of batteries in a fire.

Road safety

Your wireless phone gives you the powerful ability to communicate by voice, almost anywhere, anytime. But an important responsibility accompanies the benefits of wireless phones, one that every user must uphold.

Page 100

X828.book Page 97 Monday, July 3, 2006 3:50 PM

When you are driving a car, driving is your first responsibility. When using your wireless phone while driving, follow local regulations in the country or region you are in.

Operating environment

Remember to follow any special regulations in force in the area you are in, and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger.

When connecting the phone or any accessory to another device, read its user’s guide for detailed safety instructions. Do not connect incompatible products.

As with other mobile radio transmitting equipment, users are advised that for the satisfactory operation of the equipment and for the safety of personnel, it is recommended that the equipment should only be used in the normal operating position (held to your ear with the antenna pointing over your shoulder).

Electronic devices

Most modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone. Consult the manufacturer to discuss alternatives.

Pacemakers

Pacemaker manufacturers recommend that a minimum distance of 15 cm (6 inches) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research and recommendations of Wireless Technology Research. If you have any reason to suspect that interference is taking place, switch off your phone immediately.

Hearing aids

Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may wish to consult your hearing aid manufacturer to discuss alternatives.

Health and safety information