Samsung SGH-X210 Schematics
6. Disassembly and Assembly instructions
6-1. Disassembly
1
1) Unscrew the REAR at the four points.
2) Disassemble the IF COVER
3) Disassemble the EAR COVER
※
caution
1) Be careful not to make scratch and
molding damage!
2
PULL OUT
"FRONT
CASE"
1) Disassemble the Rear from the bottom side
to the upper side.
※
caution
1) Be careful not to make scratch and
molding damage!
PULL OUT
"REAR
CASE"
43
1) Disassemble the LCD CONNECTOR
2) Disassemble the PBA from the FRONT
ASS'Y
3) Remove the DUST TAPE
4) Disassemble the Keypad.
※
caution
1) When PBA is separated from LCD
Connector, Be careful not to damage!
2) Be careful not to damage LCD FPCB!
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
1) Push the hinge between Folder Upper and
lower, And Disassemble Front from Folder.
※
caution
1) Be careful not to make scratch and
molding damage!
2) Be careful not to damage LCD FPCB!
6-1
Disassembly and Assembly instructions
5
SCREW CAP
POINTS
1) Remove screw caps.
2) Unscrew the FOLDER Upper.
※
caution
1) Be careful not to make scratch and
molding damage!
2) Be careful not to damage LCD FPCB!
7 8
6
1) By using an assembly stick, Disassemble
FolderUpperfromFolderlower
(Right and Left are the same process)
※
caution
1) Be careful not to make scratch and
molding damage!
1) Disassemble the MOTOR and the SPEAKER
from FOLDER LOWER by using a pincette.
※
caution
1) Be careful not to make scratch and
molding damage!
2) Do not use the speaker bonding part
at disassembling speaker (Only use
marking point)
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
1) Disassemble FPCB HOLE COVER
※
caution
1) Be careful not to damage the LCD FPCB.
6-2
Loading...