Disassembly and Assembly Instructions
11.
11-1.
Disassembly
1 2
Remove screws at6points.
1)
Caution!
*
Be careful not to make scratch and molding damage
Disassemble left and right of REAR locking part
1)
using tool.(2 points)
.
3
Disassemble up and down of REAR locking part
1)
using tool.(2 points)
Caution!
*
Be careful not to make scratch and molding damage!
4
Disassemble REAR. by lifting it from FRONT ASS'Y.
1)
11-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
5 6
Disassembly and Assembly Instructions
Remove screws at2points.
1)
Caution!
*
Be careful not to make scratch and molding damage
7
Detach SIDE FPCB from LCD BRACKET
1)
Hold up SUB BOARD and Detach SUB
2)
CONNECTOR from MAIN BOARD
Caution!
*
Be careful to not to tear the FPCB.
8
Detach LCD FPCB, CAMERA FPCB, AND COAXIAL
1)
CABLE from MAIN BOARD
Caution!
*
Be careful to not to tear the FPCB.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Hold up MAIN BOARD and Detach KEY FPCB
1)
CONNECTOR from MAIN BOARD
Caution!
*
Be careful to not to tear the Slide FPCB.
11-2