Samsung SGH-i7110, GT-i7110 Alignment & Adjustment
Array course control
4.
Software Adjustments
4-1.
Test Jig(GH99
RF Test Cable(GH
-36900
39-00985
A)
A)
Test Cable(GH
Adapter(GH
39-01160
99-38251
A)
A)
4-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Array course control
Software Download
4-2.
4-2-1.
Pre-requisite for Download
GT-I7110 Mobile Device
Apollo v5.21:Downloader Application for GT-I7110
USB Download Driver:SS60_Downloader_Driver.zip
Rom Image:PDA(RnD.XML), MODEM(*.BIN) images
Equipment set for Download.
4-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Array course control
4-2-2.
Concupts
cautions
&
.
You can download PDA or MODEM separately. But We are always recommended to
download both at the same time using same version of rom image.
To download an image, the phone need to be set toaproper download mode.
There are3download modes.
PDA download:Hold
MODEM download:Hold
All download:Hold
keys and power on->Blue screen with some information.
1, 4
keys and power on->Blinking"MODEM DOWNLOAD"
7, *
on purple screen
keys and power on->Blinking"ALL DOWNLOAD" on purple screen
4, 7
For PDA image download, the phone shows download progress on the screen
For MODEM image download, the phone shows RGBW/B Screen.
For All download mode, MODEM image is downloaded first and then PDA
downloading starts.
After downloading PDA, the phone will be reboot.
Do NOT interrupt downloading process or the phone will be damaged. You would be
unable to boot up the phone or to re-flash the phone. Let it finish downloading
process even though you are flashing wrong images.
4-3
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Array course control
4-2-3.
USB Driver installation for PDA
Execution Apollo v5.24.exe.
GT-I7110 connect to the Host computer using download equipment set.
Hold
“1+4”
or Hold
key and insert power supplied test cable when use equipment set
“1+4”
key and press power on key when use equipment set
2.
Install PDA side driver.
Follow New H/W Installation Manager.
Select‘IBootHostUSB.inf’file under‘PDA_driver’folder when
Windows asks for new h/w driver. It is safe to choose“Yes”for the waring window.
Confirm“SAMSUNG BlueFin USB Downloader”Installed.
Refer to Next Page.
If Windows doesn’task for USB driver, it means USB driver installation was
**
failed before. Open Hardware Manager then delete devices with?or mark then try
again. If it doesn’twork, you need to right click on the device then try Driver
Update.
1
After installing PDA driver, Apollo shows the connection status if it is installed
properly.
4-4
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Loading...