All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to
the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to
Samsung and protected under federal laws, state laws, and international treaty provisions. Intellectual Property includes, but is not limited
to, inventions (patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation
and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you
agree that you will not (and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or
otherwise attempt to create source code from the software. No title to or ownership in the Intellectual Property is transferred to you. All
applicable rights of the Intellectual Property shall remain with SAMSUNG and its suppliers.
Samsung Telecommunications America (STA), LLC
Headquarters:Customer Care Center:
1301 E. Lookout Drive1000 Klein Rd.
Richardson, TX 75082Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
2009 Samsung Telecommunications America, LLC is a registered trademark of Samsung Electronics America, Inc. and its related
entities.
Do you have questions about your Samsung Mobile Phone?
For 24 hour information and assistance, we offer a new FAQ/ARS System (Automated Response System) at:
www.samsungtelecom.com/support
a167_UCIB3_WC_022309_F8
GH68-21206A
Printed in Mexico
T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat. 5,818,437; U.S. Pat. 5,953,541; U.S. Pat. 6,011,554 and
other patents pending.
Openwave® is a registered Trademark of Openwave, Inc.
Your phone is designed to make it easy for you to access a wide variety of content. For your protection, we want you to be aware that
some applications that you enable may involve the location of your phone being shared. For applications available through AT&T, we offer
privacy controls that let you decide how an application may use the location of your phone and other phones on your account. However,
the AT&T privacy tools do not apply to applications available outside of AT&T. Please review the terms and conditions and the associated
privacy policy for each location-based service to learn how location information will be used and protected. In addition, your AT&T phone
may be used to access the Internet and to download, and/or purchase goods, applications, and services from AT&T or elsewhere from
third parties. AT&T provides tools for you to control access to the Internet and certain Internet content. These controls may not be
available for certain devices which bypass AT&T controls.
Open Source Software
Some software components of this product incorporate source code covered under GNU General Public License (GPL), GNU Lesser General
Public License (LGPL), OpenSSL License, BSD License and other open source licenses. To obtain the source code covered under the open
source licenses, please visit:
http://www.samsungnetwork.com/Home/opensource
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE
PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
Table of Contents
Section 1: Getting Started ..............................................4
End User License Agreement for Software . . . . . . . . . . . . . . . 97
Index ............................................................................102
3
Section 1: Getting Started
This section describes how to start using your phone by
activating your service and setting up your voice mail.
Activating Your Phone
When you subscribe to a cellular network, a plug-in SIM card is
provided loaded with your subscription details, such as your PIN
and other optional services.
Removing the Battery
1. If necessary, power-off the phone by holding down the
key until the power-off image displays.
2. Remove the battery by pressing the battery lock down and
slide the battery cover away, as shown.
4
3. Lift the bottom of the battery and then lift it up and away.
Installing the SIM Card
Important!:
The plug-in SIM card and its contacts can be easily damaged by
scratches or bending. Use caution when inserting or removing
the card and keep all SIM cards out of reach of children.
Make sure the gold contacts of the card face into the phone, and
the notch in the SIM card are aligned with the notch in the phone,
as you slide the SIM card into the socket.
Notch
Removing the SIM Card
To remove the SIM card, slide it away from socket. See the
following illustration.
3. With the battery in position on the phone, place the cover
back on the handset and slide it in until it clicks.
Installing the Battery
1. Align the battery tabs with the slots at the bottom of the
phone.
2. Press the battery down until it clicks into place. Make sure
that the battery is properly installed before switching on
the phone.
Charging a Battery
Your phone is powered by a rechargeable Li-ion battery. Use the
travel adaptor to charge the battery, and use only Samsung
approved batteries and chargers.
Note:
You must fully charge the battery before using your phone for the first
time. A fully discharged battery requires up to 4 hours of charge time.
Note:
For connection to an electrical supply not located in the U.S., you must
use an adaptor of the proper configuration for the power outlet. Use of
the wrong adaptor could damage your phone and void your warranty.
Getting Started 5
1.
Remove the protective cover from the port on the side of
the phone.
2. Plug the connector of the travel adaptor into the charger
port.
Correct
Incorrect
3. Plug the adaptor into a standard AC wall outlet. When
charging is finished, unplug the adaptor from the power
outlet.
4. Remove the adaptor from the charger port.
Note:
You must unplug the adaptor before removing the battery from the
phone during charging to avoid damage.
Note:
When the travel adaptor is plugged in, the charging indicator may not
appear for a few minutes, however the battery is charging properly.
6
Low Battery Indicator
When the battery is weak and only a few minutes of talk time
remain, a warning tone sounds and the “Battery Low” message
repeats at regular intervals on the display. The backlight turns off
to conserve the remaining battery power.
When the battery level becomes too low, the phone automatically
turns off.
Powering On or Off the Phone
1. Open the phone. Press and hold the key or the
key until the phone power-on screen displays.
2. If the phone asks you to enter a password, enter a
password and press the OK soft key or the key. For
more information, refer to “Change Phone Password” on
page 48.
3. If the phone asks for a PIN, enter the PIN and press the OK
soft key or the key.
The Idle screen displays while the phone searches for your
network. After the phone finds your network and displays
adequate signal strength bars, you can make or receive
calls.
Note:
The display language is preset to Automatic at the factory. To change
the language, use the Language menu. For more information, see
“Language” on page 46.
4. When you wish to switch off the phone, press and hold the
key until the power-off image displays.
Setting Up Your Voice Mail
1. Open the phone to access your keypad. From an Idle
screen, press and hold the key.
2. When connected, follow the voice prompts from the voice
mail center.
Changing the Voice Mail Number
Your SIM card gives you the default service number of the voice
mail center. However, you may need to change the number. Use
the following procedures to change your voice mail number.
1. In Idle mode, press Menu âž” Messaging âž” Messaging
Settings âž” Voicemail and press the Select soft key or
the key.
2. Highlight Voicemail and press the key.
3. Highlight Change Name and change the Name using your
keypad.
4. Highlight
5. Press the Options soft key and select
Edit Number
and change the voicemail number.
Save
to modify the
number.
6. Press the key to return to Idle mode.
Refilling Your Minutes
You can refill your minutes using your phone.
1. In Idle mode, press Options âž” Refill and press the
key.
- Or -
In Idle mode, press the
2. The
MyAccount
Left
Navigation key.
screen displays, showing your balance and
the expiration date of your current available minutes.
Highlight the
Refill
link and press the key.
You can also select the following links:
• My Profile
: allows you to view your rate plan, view your features
and purchases, reset your pass code and voicemail password, and
refill your account.
• MEdia Net Home
• Privacy Policy
: takes you to the MEdia Net home webpage.
: gives you the URL to view the Privacy Policy on your
home computer.
Getting Started 7
3.
Highlight
Credit/Debit Card
or
PIN/Pay As You Go Card
press the key.
4. Enter the Pass Code. The first time you sign on, the Pass
Code will be the last four digits of your phone number. You
will then be asked to change it.
5. After entering your Pass Code, highlight the
Submit
and press the key.
Note:
You must first call 611 and set up the use of a payment card.
and
link
6. Enter your card number, highlight the
Submit
link and
press the key.
7. Follow the on-screen instructions.
8. Your new balance should be displayed at the
MyAccount
main screen.
9. Press the key to exit the browser and return to Idle
mode.
8
Section 2: Understanding Your Phone
This section outlines some key features of your phone. It also
displays the screen and the icons that are displayed when the
phone is in use.
Features of Your Phone
Your phone is lightweight, easy-to-use and offers many
significant features. The following list outlines a few of the
features included in your phone.
User friendly, menu driven access to features and options.
•
Text messaging capability
•
Speakerphone capability
•
Featured applications provide alarms, calculator, converter, and world
time.
•
Instant Messaging capability.
Open View of Your Phone
The following illustrations show the main elements of your
phone:
Understanding Your Phone 9
Keys
The following list correlates to the open and front view
illustrations.
1. Display: This screen displays useful information needed to
operate your phone.
2. Soft key: Performs the functions indicated by the screen
text on the bottom of the display.
3. Volume/Menu Navigation key: Allows you to adjust the
ringer volume in standby mode or adjust the voice volume
during a call. The volume key can also be used to scroll up
or down to navigate through the different menu options. To
mute the ringer during an incoming call, press the volume
key up or down. You can reject the call by pressing and
holding the down key.
4. Send key: Allows you to place or receive a call. In standby
mode, press the key once to access the Recent Call log. If
you press and hold the key down, you will initiate the most
recent call from the Recent Call log. If the phone is off,
press and hold to power on the handset.
10
5. Voicemail key: Press and hold the key to
automatically dial your voicemail.
6. Microphone: The Microphone allows the other callers to
hear you when you are speaking to them.
7. Special Function keys: Press the Asterisk/Shift key-
[*] character for calling features. In text mode,
enters the
hold down the [*] key to switch from Abc to T9 mode.
Pound/Space/Silent Profile Mode key-enters the pound
[#]
character. In text entry mode, press the [#] key to enter a
space between characters. Or, hold down the [#] key to
access Symbol mode. Press and hold the [#] key to toggle
between Silent and Normal Profile modes.
8. Alphanumeric keypad: Use these keys to enter numbers,
letters and characters.
9. Clear key: Deletes characters from the display when you
are in text entry mode. When in a main menu, press to
return to the previous menu. In Idle mode, press briefly to
display the Calendar in Month view.
Power on/off/Menu Exit key: Ends a call. Press and hold
2
1
3
10.
this key for a few seconds to power your phone On or Off.
While in the main menu, it returns the phone to standby
mode and cancels your input. When you receive an
incoming call, press to reject call.
11. Menu confirm key/WAP Browser: When navigating
through a menu accepts the highlighted choice in the
menu. If you press once in Idle mode, the WAP browser
will launch.
12. Navigation keys: This key allows you to scroll through
phone menu options and provides a shortcut to phone
functions from standby mode.
13. Earpiece: Used to listen to audio from your phone.
Closed View of Your Phone
Keys
The following list correlates to the front closed view illustration.
1. Camera lens: The camera lens is used for taking photos.
2. Power interface Connector/Headset jack: The power
interface connector is used to plug in the charging
accessories and the headset jack is used to plug in a
compatible headset.
3. Front display: Allows you to view an incoming call or
message. It also displays date, time, sound profile, signal
strength, and battery power icons, and any icons
associated with alerts or alarms.
Understanding Your Phone 11
Backlight
Icons
Text and graphics area
Soft key function indicators
Menu
G
Options
A backlight illuminates the display and the keypad when you
press any key or open the phone. It turns off when no keys are
pressed within a given period of time, or dims the light,
depending on the settings in the
Backlight
Internal Display Layout
The display has 3 areas:
Icons
Shows the received signal strength. The
greater the number of bars, the stronger the
signal.
Appears when a new text message has been
received.
12
menu.
Appears when a new multimedia message
has been received.
Appears when a new voice mail has been
received.
Appears when you set an alarm to ring at a
specified time.
Appears when T-Coil is enabled. Refer to the
section on "Calls" on page 50.
Appears when there is no network coverage
available.
Appears when a call is in progress.
Appears when you are connected to a WAP
service.
Appears when the Call Forwarding feature is
active.
Appears when Silent Profile Mode, Vibration or
Mute is active.
Shows the level of your battery. The more
bars you see, the more power you have
remaining.
Selecting Functions and Options
Your phone offers a set of functions that can be customized for
your ease and specific needs. These functions are arranged in
menus and sub-menus, accessed using the two soft keys. Each
menu and sub-menu allows you to view and alter the settings of
a particular function.
In some functions, you may be asked for a password or PIN.
Enter the code and press the OK soft key or the key.
When you access a list of options, your phone highlights the
currently active option. If, however, there are only two options,
such as On/Off or Enable/Disable, your phone highlights the
option that is not currently active, so that you can select it
directly.
Selecting Options
To view the various functions and options available and to select
the one you want:
•
Press the
Left
soft key.
•
To select the function displayed or the option highlighted, press the
key.
•
To view the next function or highlight the next option on a list, press the
Down
Navigation key or the
Down
volume key on the left side of
the phone.
•
To move back to the previous function or option on a list, press the
Navigation key or the Up volume key on the left side of the phone.
•
To move back up one level in the menu structure, press the
Back
key or the C key .
•
To exit the menu structure without changing the settings, press the
key.
Command Keys
Functions for the soft keys are defined by what appears above
each in the display. There are two soft keys, the left soft key
and the right soft key .
Soft Keys
The roles of the soft keys vary depending on the function you are
currently using; the labels on the bottom line of the display just
above each key indicate their current role.
Left Soft Key
Some functions of the left soft key are as follows.
•
In the Idle screen, press the
Options
soft key to open the My Menu
screen.
•
When in a menu mode the left soft key function is
Select
.
Right Soft Key
Some functions of the right soft key are as follows.
Understanding Your Phone 13
Up
soft
•
In the Idle screen, press the
Menu
soft key to open the Menu
screen.
•
When in a menu mode the right soft key function is
Back
.
Clear Key
The
CLR
key is used to erase or clear numbers, text, or
symbols from the display. You can also use to return to a
previous menu or to return to standby mode from any menu.
•
If you enter an incorrect character, briefly press to backspace
(and delete) the character.
•
To erase the entire sentence, press and hold .
•
To back up one menu level, briefly press .
•
From the Idle screen, briefly press to access the Calendar in
Month view.
End Key
The End key is used to turn on/off your phone, disconnect
calls, and return to the standby mode.
•
Press and hold the End key to turn on your phone.
•
Briefly press once to disconnect a call.
•
Press to return to standby mode from any menu, or to cancel the
last input.
14
Send Key
The Send key is used to answer calls, dial calls, and to recall
the last number(s) dialed, received, or missed.
•
Press and hold the Send key to turn on your phone.
•
Press once to answer calls.
•
Enter a number and briefly press to make a call.
•
Briefly press in standby mode to display a list of recent calls to
and from your phone.
•
Press twice in standby mode to call the most recent number.
•
Press to pick up a waiting call.
Navigation Key
Use the directional keys on the Navigation key to browse menus,
sub menus, and lists. Press the Up or
Down
navigation key when
jumping to highlighted links on the web.
Each key also acts as a shortcut to launch applications.
Create Text Message
Refill
Contact List
IM
Section 3: Call Functions
This section describes how to make or answer a call. It also
includes the features and functionality associated with making or
answering a call.
Making a Call
When the Idle screen displays, enter the area code and phone
number, and press the key.
Making an Inter national Call
1. Press and hold the key. The + character appears.
2. Enter the country code, area code, and phone number.
Press the key.
Correcting a Dialed Number
Use the following steps to correct a mis-typed entry prior to
initiating the call.
1. After dialing a number
•
To clear the last digit displayed, press the key.
•
To clear another digit in the number, press the
Left
or
Right
navigation key until the cursor is immediately to the right of the digit
to be cleared. Press the key.
•
To enter a missing digit press the
Left
or
Right
navigation key until
the cursor is in position and enter the digit.
•
To clear the whole display, press and hold the key.
2. Press the key to return to the Idle screen.
Ending a Call
When you want to finish your call, briefly press the key, or
simply close your phone.
Redialing the Last Number
All incoming, outgoing and missed calls are listed in the Recent
Calls Menu. If the number or caller is listed in your Address
Book, the name associated displays.
To access the Recent Calls menu:
1. From the Idle Screen, press Menu âž” Recent Calls.
2. Use the Up and Down navigation keys to scroll through the
Recent Calls options. Choose from All Calls, Missed Calls,
Calls Made, Calls Received, Delete All, Call Time, Data
Volume, and Data Call Time.
3. From the Idle Screen, press the key to display a list of
the most recent numbers used in the order you dialed or
received them.
Call Functions 15
4.
Use the Up and Down navigation keys to scroll through the
numbers until the number you want highlights.
5. To dial the number, highlight the number and press the
key.
Making a Call from the Address Book
You can store phone numbers that you use regularly on the SIM
card or in the phone’s memory. These entries are collectively
called the Address Book.
Once you have stored a number in the Address Book, you can
dial it by pressing a few keys using the Speed Dial feature.
For further details about the Address Book feature, see “Finding an Address Book Entry” on page 35.
Adjusting the Call Volume
During a call, if you want to adjust the earpiece volume, use the
Volume keys on the left side of the phone.
Press the key to increase the volume level and the key to
decrease the level.
In Idle mode, you can also adjust the ringer volume using these
keys.
16
Answering a Call
When a call is received, the phone rings and displays the caller’s
phone number, or name, if stored in the Address Book.
1. From the Idle Screen press the key or the Accept soft
key to answer the incoming call.
2. Press
Menu
âž”
Settings âž” Calls
âž”
General
âž”
Call Answer
If the Any Key option in the Call Answer menu is
activated, you can press any key to answer a call except
the key and the Reject soft key.
Note:
To reject an incoming call, press and hold either the Up or Down
Volume Keys on the left side of the phone before opening the phone. A
quick press of either side volume key silences ringer on incoming call.
3. End the call by closing the phone or by pressing the
key.
Note:
You can answer a call while using the Address Book or menu features.
After ending the call, the phone returns to the function screen you
were using.
.
Recent Calls
The phone stores the numbers of the calls you’ve dialed,
received, or missed in the
Menu
âž” Recent Calls menu. If the
number or caller is listed in your Address Book, the name
associated displays.
Viewing Missed Calls
The number of calls you have missed displays on the Idle screen
when a call is missed. To view the number details, use the
following steps:
1. If the phone is closed, open the phone.
2. Press the View soft key. The most recent missed call
displays.
Note:
If there is a voicemail sent by the same number, associated icons
display and can be selected.
3. To scroll through the missed calls, press the Up or Down
navigation key.
Deleting a Missed Call
To delete a missed call entry, use the following steps:
1. Immediately after missing a call, press the key.
2. Press the Options soft key and highlight Delete. The
following options are available:
• Selected
: Only deletes the missed call that you highlight.
•All
: Deletes all missed call entries.
Highlight one of the options and press the Select soft key,
or the key.
3. At the “Delete?” prompt, press the Yes soft key to confirm
deletion or No to cancel.
Call Time
1. From the Idle Screen, press Menu âž” Recent Calls.
2. Highlight Call Time and press the Select soft key or the
key.
3. The following options that are available.
•Last Call Time
•Total Sent
• Total Received
: shows the length of time for the last call.
: shows the total length of time for the calls made.
: shows the total length of time for the calls
received.
4. If you want to reset your Call Time information, press the
Reset soft key.
Call Functions 17
5.
At the “Are You Sure?” prompt, press the Yes soft key to
confirm the reset or No to cancel.
6. Enter your password. At the “Confirm New Password”,
re-enter the same password and press the OK soft key.
Note:
You are only required to set the password 1 time. After the initial setup,
you can enter the password to reset the call times.
7. Press the Back soft key or the key to end.
Data Volume
1. From the Idle Screen, press Menu âž” Recent Calls âž”
Data Volume and press the Select soft key or the
key.
2. Use the Up and Down navigation keys to view the
following information:
• Last Sent Data
• Last Received Data
•Total Sent Data
: shows the size of data sent last.
: shows the size of data received last.
: shows the total volume of data sent from the
phone.
• Total Received Data
: shows the total volume of data received from
the phone.
3. Press the Back soft key or the key to end.
18
Data Call Time
1. From the Idle Screen, press Menu âž” Recent Calls âž”
Data Call Time and press the Select soft key or the
key.
2. The following options are available:
• Last Data Call
: shows the time used for the last data call sent or
received.
• Total Data Call
3. Press the Back soft key or the key to end.
: shows the total time used to send or receive data.
Silent Profile Mode
Silent Profile mode is convenient when you wish to stop the
phone from making noise, in a theater for example.
In Idle mode, press and hold the key until the
on
message and the Silent Profile Mode icon displays.
Silent profile
By default, your phone will vibrate when in Silent Profile mode.
You can also set it to Mute. To change the Silent Profile mode
setting, see “Sound Profiles” on page 42.
To exit and reactivate the previous sound settings, press and hold
the key again until
Normal profile on
displays. The
Silent Profile Mode icon no longer displays.
Options During a Call
Your phone provides a number of control functions that you can
use during a call.
Speakerphone Key
During a call, use the speakerphone key to activate the
speakerphone operation. Use the volume keys (located on the left
side of your phone) to adjust the volume.
Putting a Call on Hold
You can place the current call on hold whenever you want. You
can also make another call while you have a call in progress if
your network supports this service.
To put a call on hold:
1. While on a call, press the left soft key Options. Highlight
Hold and press the Select soft key. The call is on hold.
2. You can reactivate the call whenever you want, by pressing
the Resume soft key.
To make a call while you have a call in progress:
1. Place the call on hold using the previous procedures, and
enter the phone number that you wish to dial or look it up
in the Address Book.
2. Press the key to dial the second call.
When you have an active call and a call on hold, you may switch
between the two calls, changing the one on hold to active and
placing the other on hold. To switch between the two calls,
simply press the Options soft key and select
Swap
. The current
call is placed on hold and the call on hold is reactivated so that
you can continue conversing with that person.
In Call Options
During a call, press the Options soft key to access the following:
•
Hold
: Places the call on hold.
•
New Call
: places the current call on hold and allows you to enter and
dial another number.
•
Contact List
•
Message
: access the Address Book information.
: allows you to create a new text message or go to your My
Messages folder.
•
Calendar: displays the calendar on the phone.
•
Mute Keypad Tone
•
Send DTMF
: turns off the key sound during the call.
: sends DTMF (Dual Tone Multi-Frequency) tones to the
contacts you have selected.
If you have are in a multi-party call, the following options also
display.
•
Join
: joins the calls you have established with your phone.
•
Split
: when a multiparty call is in progress, the split option will allow
you to talk with any of the parties separately.
Call Functions 19
•
Remove
: allows you to remove any of the parties connected in a
multiparty call.
•
End Held Call
: ends the call that is placed on hold.
When you want to finish, end each call normally by pressing the
key.
Switching off the Microphone (Mute)
You can temporarily switch your phone’s microphone off, so that
the other person cannot hear you.
Example: You wish to say something to a person in the room, but do not want the
person on the phone to hear you.
During a call, to switch the microphone off temporarily:
1. Press the Mute soft key. Unmute displays on the soft
key.
2. Press the Unmute soft key to deactivate the Mute
function.
Muting or Sending Key Tones
These options allow you to turn the key tones off or on. If the
Mute
Keypad Tone
option is selected, your phone does not
transmit the DTMF (Dual Tone Multi-Frequency) tones of the
keys, which allows you to press keys without hearing key tones
during a call.
20
Note: To communicate with answering machines or computerized telephone
systems, the Send DTMF option must be selected.
Searching for a Number in Address Book
You can search for a number in Address Book during a call.
1. Press the Down key to display the
2. Use the Navigation keys to select an entry. Enter the first
Contact List
screen.
few letters of the name to display entries listed starting
with the first entry matching your input. Scroll to the name
you are looking for using the Up or Down key. Press the
key to select the contact.
3. Press
Options
soft key to access the following options:
•
Edit
: allows you to edit the contact information.
•
Send Message
: allows you to send the selected contact a
message.
•Call
: allows you to call the number.
•
Copy to Phone/SIM Card
: allows you to copy the contact to the
phone memory or your SIM card.
•
Assign Speed Dial
: allows you to assign a speed dial number to
the selected contact.
•
Delete
: allows you to delete the selected contact from your Contact
List.
Press the
Select
4.
Back
soft key to return to the contact information.
soft key to make your selection or the
For further details about the Address Book feature, see “Finding an Address Book Entry” on page 35.
Call Waiting
The Call Waiting feature allows you to answer an incoming call
while you have a call in progress, if this service is supported by
the network, and you have set the Call Waiting-Voice Call Menu
to Activate. You are notified of an incoming call by a call waiting
tone.
To answer a call while you have a call in progress:
1. Press the key or the Accept soft key to answer the
incoming call. The first call is automatically put on hold.
2. To switch between the two calls, press the Options soft
key and select
Swap
.
To end a call on hold, press the Options soft key, select the End
Held Call option and press the
Select
soft key.
To end the current call, press the key.
Call Functions 21
Section 4: Menu Navigation
This section explains the menu navigation for your phone.
Menu Navigation
Menus and sub-menus can be accessed by scrolling using the
Navigation keys or by using the shortcut keys.
Accessing a Menu Function by Scrolling
1. In Idle mode, press Menu âž” Settings âž” Ph
one
. If the
menu contains sub-menus, you can access them by
highlighting the option and by pressing the Select soft key
or the key.
2. If the menu that you have selected contains further
options, repeat this step. To scroll through the menus,
press the Up or Down navigation key. To jump to the first
or last items on the menu, press the Up or Down Volume
key (located on the left side of your phone). Press the
Select soft key, or the key to make your selection.
3. To return to the previous menu level, press the Back soft
key or the key.
22
4. To exit the menu without changing the settings, press the
key.
Using Shortcuts
Numbered menu items, such as menus, sub-menus, and options
can be quickly accessed by using their shortcut numbers. In
Menu mode, Main Menus can be accessed by pressing the
number keys (1 to 9) corresponding to their location on the
screen.
Example: Accessing the Language menu.
1. Press the Menu soft key.
2. Press the key for Settings.
3. Press the key for Phone.
4. Press the key for Language. The available
languages are displayed.
Navigation Keys
The Navigation Keys come preset. To change the Navigation
Keys, follow these steps:
1. In Idle mode, press Menu âž” Settings âž” Ph
one
âž”
Shortcuts.
2. You can change the
by highlighting the option and pressing the
Up, Down, Left
and
Right
menu options
Options
key.
3. You can
Change, Remove
Down
Navigation keys to highlight the selection and press
, or
Remove All
. Use the Up or
the key.
4. Press the
Save
soft key to save your changes.
My Menu
My Menu can be accessed in Idle mode by pressing the
soft key.
My Menu displays the following menu items:
•
Refill: allows you to refill your prepaid minutes via the WAP Refill URL.
•
Camera: allows you to take photos with your camera.
•
Alarms
: allows you to set the alarms for your phone.
•
Mobile Email: allows you to access Mobile Email.
•
IM
: allows you to access Instant Messaging.
soft
Options
•
Empty 6 - #
: allows you to set the menu items to menus that you
frequently use.
Menu Navigation 23
Section 5: Entering Text
This section outlines how to select the desired text input mode
when entering characters into your phone. This section also
describes how to use the T9 predictive text entry system to
reduce the amount of key strokes associated with entering text.
Changing the Text Input Mode
The
Text Input
functions from T9 Mode to ABC Mode, Numeric Mode, or
Symbols Mode.
Press and hold the key to toggle between the T9 Mode and
the ABC Mode.
Short press the key while in either the T9 Mode or the ABC
Mode to toggle from All Caps to Initial Caps, to Lower Case, or to
Numeric entries.
Press and hold the key to go into Symbols Mode. To exit
Symbols Mode, press either the Cancel soft key, the OK soft key
or the key.
T9 Mode
24
option allows you to change the text entry
This mode allows you to enter words with only one
keystroke per letter. Each key on the keypad has more
than one letter; for example, pressing the 5 key can enter
J, K, or L. However, the T9 mode automatically compares
the series of keystrokes you make with an internal
linguistic dictionary to determine the most likely word, thus
requiring far fewer keystrokes than the traditional Alphabet
mode.
ABC Mode
This mode allows you to enter letters by pressing the key
labeled with the letter or number you want. Press the key
once, twice, three, or four times until it displays.
Numeric Mode
This mode allows you to enter numbers.
Symbols Mode
This mode allows you to enter symbols, such as
punctuation marks.
When you are in a field that allows characters to be entered, you
Options
Send To
New Message
160
1/12
Abc
will notice the text input mode indicator on the display.
1. To change the text input mode, press the key.
2. Choose from the following options:
A long press of the key toggles between ABC mode
and T9 mode. While in ABC mode, a short press of the
key changes the text case between the ABC, Abc,
abc, and 123 mode. While in T9 mode, a short press of the
key changes the text case between
T9[E]AB, T9[E]ab
Note:
Press and hold the key to access the Symbol mode. Press the
number key corresponding to the symbol you want to enter. Use the Up
Down navigation keys to scroll through the available symbols.
and
Press the Cancel soft key to exit.
and
123
.
T9[E]Ab
Using T9 Mode
T9 Predictive Text input mode is based on a built-in dictionary.
Enter a Word in T9 Mode
1. In T9 mode, begin entering a word by pressing the 2 to 9
keys. Press each key only once for each letter. The built-in
dictionary lists words that match the keystrokes you have
entered.
Example: To enter “Hello”, press
, , , ,
The word that you are typing appears in the display. It may
change with each key that you press.
2. Enter the whole word before editing or deleting the
keystrokes.
,
3. When the word displays correctly, continue to step 4.
If the word doesn’t display correctly, press the key to
display alternative word choices for the keys that you have
pressed.
Entering Text 25
Example:
Both “Of” and “Me” have the and keys. The phone
displays the most commonly used choice first.
4. Insert a space by pressing the key and start entering
the next word.
Add a New Word into the T9 Dictionary
1. After pressing the keys corresponding to the word you
want to add, press the key to display the alternative
words.
2. When the last alternative word is displayed, Spell displays.
Press the Spell soft key or the key.
3. Enter the word you want to add using ABC mode.
4. Press the Add soft key or the key.
The word is added to the T9 dictionary and becomes the
first word for the associated keypress series.
Note:
This feature may not be available for some languages.
•
To enter periods, hyphens, colons, or parenthesis, press the key.
T9 mode applies grammar rules to ensure that correct punctuation is
used.
26
•
To shift case in T9 mode, use the key. There are 3 cases: Initial
capital, Capital lock, and Lower case.
•
You can move the cursor by using the Left and Right keys. To delete
letters, press the key. Press and hold the key to clear the
display.
Using Alphabet Mode
To use the Alphabet Mode use the to keys to enter
your text.
1. Press the key labeled with the letter you want:
•
Once for the first letter
•
Twice for the second letter
•
And so on
2. Select the other letters in the same way.
Note:
The cursor moves to the right when you press a different key. When
entering the same letter twice or a different letter on the same key, just
wait for a few seconds for the cursor to move to the right
automatically, and then select the next letter.
Loading...
+ 78 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.