Samsung SG648, SG688, SG606, BG606, BG60 Disassemble

11. Disassemble and assemble method

11-1 Refrigerator inside lamp replacement

1) Remove the screw with (+) driver and
push the cover to the arrow direction and
apart.

2) Remove out the lamp to the arrow direction
and replace with new one. ( Left & Right )

3) Insert the front of the cover first and screw
it.

11-2 Freezer inside lamp replacement

• Grab the the salient part of cover and pull
it down to apart. Replace the 220V/15W
lamp and insert front of cover first and
then fix it.

Samsung Electronics 41

11-3 Disassemble of refrigerator cooling part

1) Remove foods and shelves inside the
refrigerator.

2) Pull out the chilled room box to the arrow
direction and pul it up to apart at the locking
point.

3) Push the right arrow part of the chilled room
inside and apart the chilled room cover.

4) Up the cover of vegetable box and pull apart
then pull it out.

5) Remove the screws with (-) driver.

6) Release the locking part using (-) driver as
shown.

7) Pull out the cover front part.

2 screws

42 Samsung Electronics

8) Disassemble the wire housing of motor in the
center.

9) Pull the housing part and disassemble the wire
terminal.

10) Remove screws of duct and pull apart.

11) Release wire terminal on top of the left.

12) Remove screws of evap. Cover rear and release
the locking part of both left and right using (-)
driver.

Remove 2
screws

latch

Remove 2 screws

Samsung Electronics 43

♦ Cooling cycle unit assembly in the refrigerating compartment

♦ Cooling cycle unit cover assembly in the refrigerating compartment

(Groove for preventing
small ice when
defrosting)

44 Samsung Electronics