Samsung SFG-D0100 Installers Guide

Radio Access Network

310 5G CPE Indoor

Installation Manual

Document Version 2.0

June 2018

Document Number: N/A

Describes the product installation and requirement procedure.

system, or transmitted, in any form or by any means whether, electronic, mechanical, or otherwise without the prior written permission of SAMSUNG Electronics Co., Ltd.

No warranty of accuracy is given concerning the contents of the information contained in this publication. To the extent permitted by law no liability (including liability to any person by reason of negligence) will be accepted by SAMSUNG Electronics Co., Ltd., its subsidiaries or employees for any direct or indirect loss or damage caused by omissions from or inaccuracies in this document.

SAMSUNG Electronics Co., Ltd. reserves the right to change details in this publication without notice.

This manual should be read and used as a guideline for properly installing and/or operating the product.

This manual may be changed for system improvement, standardization and other technical reasons without prior notice.

Updated manuals are available at:

https://systems.samsungwireless.com/

For questions on the manuals or their content, contact

NetSys Tech Writer@sea.s am su ng .com

Confidential

Preface vi

Conventions in this Document ........................................................................................................ vi

New and Changed Information ...................................................................................................... vii

Revision History .............................................................................................................................. vii

Organization of This Document ..................................................................................................... vii

Related Documentation ................................................................................................................. vii

Personal and Product Safety .......................................................................................................... viii

Equipment Markings ....................................................................................................................... ix

Chapter 1 Before Installation 1

System View and Interface ............................................................................................................... 1

Indoor CPE View ........................................................................................................................... 1

Indoor CPE External Interface ...................................................................................................... 2

Indoor CPE Power Cord and Power Supply .................................................................................. 2

Specifications ................................................................................................................................... 4

Cautions for Installation ................................................................................................................... 5

Before Installing ........................................................................................................................... 5

While Installing ............................................................................................................................ 5

After Installing ............................................................................................................................. 5

Installation Tools .............................................................................................................................. 6

Chapter 2 Installing System 7

Installation Procedure ...................................................................................................................... 7

Transporting and Unpacking ............................................................................................................ 8

Bringing in Items .......................................................................................................................... 8

Unpacking Items .......................................................................................................................... 8

In the Box ..................................................................................................................................... 8

Indoor CPE Installation ..................................................................................................................... 9

Fixing CPE on Window Frame ...................................................................................................... 9

Indoor CPE Installation Material .................................................................................................. 9

Chapter 3 Inspect the Installation 15

Inspection Plan........................................................................................................................... 15

On-site Inspection and Inspection Checklist ............................................................................... 16

Sharing Inspection Results and Taking Corrective Actions ........................................................ 16

Checking the Results of Corrective Actions ................................................................................ 16

Sharing the Results of Corrective Actions and Preparing Preventive Plan ................................. 16

Construction Situation Checklist ................................................................................................ 16

Appendix A Acronyms 19

Confidential

List of Figures

Figure 1. CPE DU External Interface ................................................................................................................ 2

Figure 2. Power Cord and Power Supply ......................................................................................................... 2

Figure 3. Procedure to Install the Indoor CPE ................................................................................................. 7

Figure 4. Indoor CPE Package Contents .......................................................................................................... 8

Figure 5. Indoor CPE Window Frame Installation Step 1 .............................................................................. 10

Figure 6. Indoor CPE Window Frame Installation Step 2 .............................................................................. 10

Figure 7. Indoor CPE Window Frame Installation Step 3 .............................................................................. 11

Figure 8. Indoor CPE Window Frame Installation Step 4 .............................................................................. 11

Figure 9. Indoor CPE Window Frame Installation step 5 .............................................................................. 12

Figure 10. Indoor CPE Window Frame Installation step 6 .............................................................................. 12

Figure 11. Indoor CPE Interface Overview ...................................................................................................... 13

Figure 12. LED Information ............................................................................................................................. 14

Figure 13. Installation Inspection Procedure .................................................................................................. 15

Figure 14. Troubleshooting Steps ................................................................................................................... 18

Confidential

List of Tables

Table 1. 5G Indoor CPE Power Cord and Power Supply Specifications .......................................................... 3

Table 2. 5G Indoor CPE Key Specifications .................................................................................................... 4

Table 3. Basic Installation Tools ..................................................................................................................... 6

Table 4. Requirement to Fix Indoor CPE on Window Frame ....................................................................... 12

Table 5. Construction Situation Checklist .................................................................................................... 16

Preface

Symbol

Description

Provides additional information.

This manual describes how to instal l the ICL Indoor CPE (Model: SFG-D0100) on a window frame bracket including how to connect cables.

Conventions in this Document

Samsung Networks product documentation uses the following conventions.

Symbols

Indicates a task. Indicates a shortcut or an alternative meth od.

Confidential

Provides information or instructions that you should follow to avoid service failure or damage to equipment.

Provides information or instructions that you should follow to avoid personal injury or fatality.

Provides antistatic precautions that you should observe.

Menu Commands

menu | command

This indicates that you must select a command on a menu, where menu is the name of the menu, and command is the name of the command on that menu.

File Names and Paths

These are indicated by a bold typeface. For exam ple: Copy filename.txt into the /home/folder1/folder2/bin/ folder.

User Input and Console Screen Output Text

Input and output text is presented in the Courier font. For example,

context <designated epc-context-name>

CLI commands are presented in bold small caps. For example, Type the RTRV-NE-STS command in the input field.

Preface

Document Number

Product/Software Version

Document Version

Publication Date

Remarks Section

Title

Description

New and Changed Information

This section describes information that has been added/ changed since the previous publication of this manual.

Revision History

The following table lists all versions of this document.

Confidential

N/A Indoor ICL 5G

CPE

N/A Indoor ICL 5G

CPE

1.0 April 2018 First version

2.0 June 2018 2nd version

Organization of This Document

Chapter 1 Before Installation This chapter introduces Indoor 5G CPE description that items

should be understood before installation.

Chapter 2 Connecting

Cables Chapter 3 Installing System This chapter describes the procedures to install the Indoor CPE Chapter 4 Inspect the

Installation Appendix A Acronyms Describes the acronyms used in this manual. Appendix B Standard Torque This annex describes the standard torque when tightening the

This chapter describes the procedures to conn ect the cab les to the Indoor 5G CPE

This chapter describes the procedures of insp ect ing ins tal lation status after Indoor 5G CPE installation and cabling is completed.

bolt.

Personal and Product Safety

This product safety information includes European directives, which you must follow. If these do not apply in your country, please follow similar directives that do apply in your country.

Proposition 65 (US Only)

State of California Proposition 65 Warning (US only) WARNING: This product contains chemicals known to the State of California to

cause cancer and birth defects or other reproductive harm.

Electrical

All structural parts are grounded and all input and outputs have built-in isolation from the network. All input and output ports that connect to external power sources are designed to meet relevant national safety requirements.

Confidential

The product contains hazardous energy levels as defined by UL 60950. Care must be taken when maintaining this equipment as injury to personnel or damage to the equipment could result from mistakes. Maintenance should only be carried out by trained and competent engineers who are familiar with the relevant procedures and instructions.

Manual Handling

Care should be taken when handling equipment. Give due consideration to the weight of the equipment, the physical capability of the individual(s) handling the equipment, and movements such as twisting, bending and stooping, which could lead to skeletal and muscular injuries.

Installation

Installation is recommended to be carried out by trained personnel. All relevant safety measures should be taken to ensure equipment is not connected to live power and transmission sources during installation. Equipment must be correctly installed in order to meet the relevant safety standards and approval conditions.

Maintenance

Maintenance must only be carried out by a suitably trained and competent technician. All safety instructions must be carefully observed at all times. Equipment covers should not be removed while live power and transmission is connected unless in a controlled environment by trained technicians.

Preface

Fire

The product is powered from an AC supply. To protect against fire, the equipment is fused.

Environment

The product must be operated in an environment with the specified relative humidity and ambient temperature ranges.

Keep all liquids away from the equipment as accidental spillage can cause severe damage.

Anti-Static Precautions

The circuit boards and other modules in the product are sensitive to and easily damaged by static electricity. If any card or sub-assembly is removed from the unit, the following anti-static precautions must be observed at all times:

• Service personnel must wear anti-static wrist straps.

Confidential

• Circuit boards and sub-assemblies must be placed on ground conductive mats

or in conductive bags.

• All tools must be discharged to ground before use.

• The anti-static wrist strap and cord must be checked at regular intervals for

their suitability for use.

Equipment Markings

Correct disposal of batteries in this product (Applicable in countries with separate collection systems.)

The marking on the battery, manual or packaging indicates that the battery in this product should not be disposed of with other household waste. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66.

The battery incorporated in this product is not user replaceable. For information on its replacement, please contact your service provider. Do not attempt to remove the battery or dispose it in a fire. Do not disassemble, crush, or puncture the battery. If you intend to discard the product, the waste collection site will take the appropriate measures for the recycling and treatment of the product, including the batter y .

+ 20 hidden pages