Samsung SF-530, 531P Service Manual
If any items are missing or damaged, notify your dealer immediately.
Components may differ from one country to another.
If you purchase SF-531P, SmarThru User’s
Guide, USB cable and software installation
CD-ROM are additionally supplied.
SF-530 Series
User’s Guide
SmarThru
User’s Guide
LINE EXT.
Fold out the extender
if necessary.
Fold out the extender
if necessary.
Fold out the extender
if necessary.
Insert one end first, then the other end by squeezing this leg
inward to make the tray easy to insert.
Make sure both the printer and
the computer are turned off.
Note:
If you are want to use an extension telephone or an answering
machine, refer to the SF-530 Series User’s Guide.
Notes:
•
SF-530 series will turn on and the display will show ‘SYSTEM INITIAL’.
If there is no paper loaded, the displays will shows ‘NO PAPER.’ Continue
the next step.
•
Power cord must be plugged in grounded power socket.
(SF-531P only)
Document Input
Support
Document Output
Support
Handset
Handset Cradle
While pressing part A on the bottom of the
cradle, push the cradle toward the machine
until it clicks into place.
Home
Visit us at
http://www.samsungelectronics.com/mfp
httP://www.samsungelectronics.com/fa x
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
*JC68-00639AV200*
Verify the following:
• At least 32 MB or more of RAM is installed on your PC.
• There is at least 120 MB of free disk space on your PC.
• The CPU of your PC is Pentium 133 or higher.
• All applications are closed on your PC before beginning installation.
• Windows 95, Windows 98, Windows Me, Windows NT 4.0,
Windows 2000,
Note: You must install the USB driver before you install the printer driver.
For details, refer to the User’s Guide (see page 2.13) provided with
your muchine.
1. Place the software CD-ROM in the CD-ROM drive. Install will start
automatically.
If the CD-ROM drive does not automatically run:
Select Run from the Start menu, and type x:\cdsetup.exe in the Open box
(where x is the drive letter for the CD-ROM drive), then click OK.
2. When the opening screen appears, click SF-530 Series, then select the
appropriate language.
3. Click Install the Samsung Software on your PC and follow the on-screen
instructions.
Before Installing Printer Software
Installing Printer Software
To operate your printer, you must install a printer software, which translates data
from your application into data the printer understands.
The CD-ROM shipped with your printer contains the following printer drivers and
utilities:
• MFP driver for Windows.
• USB driver for the USB interface
• SmarThru
• OCR Software
Note: For information on configuring for SmarThru, or installing the USB
driver, refer to the SF-530 Series User’s Guide.
Home
Visit us at
http://www.samsungelectronics.com/mfp
http://www.samsungelectronics.com/fa x
P/N. JC68-00639A Rev.2.00
1 2
3 4
Load a stack of paper with
the print side facing up.
1 2
4
5
3
6
Shake the cartridge from side to side 5 or 6
times to redistribute the toner evenly inside
the cartridge.
SET DATE & TIME
When you install the SF-530 series for the first time, or when
the product is without power for about 15 seconds, the
display prompts you to reset the date and time.
1. Press Setup on the front panel. the display shows the first
setup menu; FAX NUMBER/NAME.
2. Press ➛ or ❿ until ‘TIME/DATE SETUP’ appears, then press
Start/Enter to access the Time/Date Setup menu.
3. The display asks you to choose a date format. Press
Start/Enter.
4. Press ➛ or ❿ until you find the desired date format, then
press Start/Enter.
If you select USA, the date appears in format of MonthDay-Year. The EUROPE format will be displayed in format
of Day-Month-Year.
The display shows the currently set date and time using
the selected date format and asks you to set the month.
04-01-2001 10:30
5. Enter the correct date and time for each item using the
number keypad on the front panel.
Each time you enter the appropriate number, the display
asks you to enter the next item in the following order:
MONTH, DATE, YEAR, HOUR, and MINUTE.
Enter the time in 24-hour format. For example, enter
2230 for 10:30 P.M.
If you enter an invalid number, the display does not
proceed to the next step. If this happens, re-enter the
correct number.
6. When you are finished, press Start/Enter to save the
setting. The display returns to Standby mode and shows
the date and time you have set.
9-MAR 12:30 FAX
Note: To set your fax number and name, refer to the
SF-530 Series User’s Guide.
(SF-531P only)
http://getMANUAL.com
Loading...