SAMSUNG SEW-3030 User Manual
PORTABLE DIGITAL
WIRELESS MONITORING SYSTEM
USER MANUAL
MODEL: SEW-3030
Copyright
©2010 Samsung Techwin Co., Ltd. All rights reserved.d.
Trademark
is the registered logo of Samsung Techwin Co., Ltd.
The name of this product is the registered trademark of Samsung Techwin Co., Ltd.
Other trademarks mentioned in this manual are the registered trademark of their respective company.
Restriction
Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this document shall be
reproduced, distributed or changed, partially or wholly, without formal authorization of Samsung Techwin.
Disclaimer
Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal
guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility.
Samsung Techwin reserves the right to change the contents of this document without prior notice.
Wireless Monitoring System
User Manual
2
Caution if you use the system to watch a young child, do not place the camera
where the child can reach.
When using the system with only battery power and the charge is low, then the
picture and or sound may affected.
If this occurs then please connect the AC power adaptor and/or replace with
new batteries.
If you are using the optional rechargeable battery then plug in the AC power
adaptor to recharge
SPECIFY SERVICE INSTRUCTIONS AND WARRANTY TERMS
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
FCC NOTE:
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT.
SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE
EQUIPMENT.
WARNING:
• Some adult assembly or installation required.
• This product contains small parts that may cause choking. Keep small parts away
from children.
• This product is NOT intended to replace proper supervision of children.
• You MUST check your child’s activity regularly, as this product will not alert parents
to silent activities of a child.
• Before using this product, read and follow all instructions contained in this booklet,
and read and follow all instructions and warnings on the product.
• To prevent entanglement with adapter cords, NEVER PLACE THE CORD IN OR
NEAR A CRIB OR PLAYPEN. DO NOT place the product or its AC adapter cords
within reach of children.
• ALWAYS KEEP THE TRANSMITTER, RECEIVER AND AC ADAPTERS OUT OF
REACH OF CHILDREN.
• NEVER use the transmitter or receiver near water, including near a bathtub, sink,
laundry tub, wet basement, etc.
3
• This product is intended for indoor use only.
• This product is not intended for use as a medical monitor and its use should not
replace adult supervision.
• Check reception regularly. Test monitor before use and after changing camera
location.
• Always unplug AC adapters from wall outlets and power sources during periods of
non-use.
• To prevent overheating, keep the product and AC power adapters away from any
direct sunlight and heat sources such as radiators, heat registers, cooking devices
(e.g., stoves and ovens) and other appliances that produce heat (e.g., amplifiers,
televisions and stereos).
• Ensure that the product is well ventilated during use. Avoid contact with pillows and
furniture that may block ventilation.
• Use only the AC adapters provided with the product, as other adapters may damage
the product. Plug the adapters only into standard household current (120 volts AC).
Place the AC adapters avoiding pinch points otherwise you can damage the
adapters.
• When an AC adapter is plugged into a power source, DO NOT touch the exposed
end of the AC adapter’s cord.
• Do not use extension cords with the AC power adapters to avoid entanglement.
• This product should only be serviced by qualified and authorized Samsung service
centers.
• Images and sounds are transmitted by the product over public airwaves and
transmissions may be picked up by other units.
BATTERY WARNING
When using the product in portable mode, check batteries regularly.
DO NOT use the monitor in portable mode when batteries are low.
• DISPOSE OF OR RECYCLE BATTERIES PROPERLY IN ACCORDANCE WITH
APPLICABLE LAWS, which may vary by location.
• Insert batteries with the correct polarity.
• Do not mix new and used batteries.
• Remove exhausted batteries from the product.
• Keep all batteries away from children.
• THERE IS A RISK OF EXPLOSION IF INCORRECT BATTERIES ARE USED.
4
Features
• Samsung’s digital wireless technology provides excellent image quality and clarity.
• Virtually eliminates interference using a secure and private signal
• Up to 100 m / 330 ft wireless open space transmission range.
The actual range may vary depending on the use environment.
• Listen in with exceptional sound clarity
• Safety warning feature on monitor notifies you when
the camera is out of range of the transmitter.
• System is expandable up to 4 cameras (additional cameras sold separately).
• Two-way audio communication
• Camera temperature display on monitor
• Built-in music player with 4 different tunes.
Camera Features
• VGA resolution camera
• Night vision allows for low-light viewing up to 10 ft / 3.0 m.
Performance varies depending on environmental conditions.
• Built-in microphone and speaker
• Camera can be battery operated for true portable wireless operation
• Plays up to 4 different tunes activated from monitor
• Temperature sensor
• Nightlight
Receiver Features
• 3.5” color LCD monitor/receiver with superior image quality
• Video/Audio output for viewing on TV/Monitor or recording on VCR/DVD recorder
• Rechargeable lithium polymer battery for true portability
• Audio level indicator and alarm
• Room temperature display
Contents
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wireless Receiver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wireless Receiver Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wireless Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Camera Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11
Menu Operation
Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power Saving Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Auto mute. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Time Alarm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Screen Saver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Date Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Time Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Trigger Alert. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Temp. Alert. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A/V Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Factory Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pairing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Camera Pairing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hardware and CD driver installation . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Appendix #1 - Receiver Specifications. . . . . . . . . . . . . . . . . . . . . . . .
Appendix #2 - Camera Specifications . . . . . . . . . . . . . . . . . . . . . . . .
Template. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
4
6
6
9
9
1
4
16
16
16
17
18
18
18
19
19
19
20
20
21
21
21
23
28
29
30
31
6
Getting Started
The system comes with the following components:
Wireless Camera Wireless Receiver Power Adapter Power Adapter USB Cable RCA Cable CD User Manual Warranty Card Wire Clips Screws
(For Camera) (For Receiver)
Check your package to confirm that you have received the complete system,
including all components shown above
.
Wireless Receiver
Front/Back Controls
1. 3.5” LCD Screen – Displays video
from the camera.
2. Microphone – Transmits audio to
the camera when TALK Button is
pressed down and held like a walkie-
talkie
3. SLEEP Button – Displays the
selected screen saver and reduces the
LCD brightness to conserve battery. If
the blank screen saver is selected, the
LCD will turn off. Press the sleep
button again to come out of the sleep
mode. When the audio is detected from the Camera, the monitor will come out
of sleep mode.
Sensitivity on the camera needs to be set to high.
4. Navigation Controls/OK Button – Use the controls to move and select
while in Viewing Mode and Menu Mode.
Viewing Mode: The following controls are used while watching live video from
the camera:
• Press the [+/–] keys to increase or decrease the volume.
• Press the [A] key to view cameras in automatic switching mode.
7
• Press the [M] key to manually switch between cameras.
Menu Mode: Use the [+/–/A/M] keys to navigate in Menu Mode. Press the OK
button to confirm the menu selection.
5. MENU Button – Press to access the receiver menu. Press the button again
to exit.
6. Receiver Antenna – receives and sends signals from or to the camera.
7. USB Port (Optional Use) – Connect the
included USB cable to view video from the
receiver on your computer. The software CD
is included in the package to use on a PC.
After installation, this product can be used as
a network camera, compatible with SKYPE
and MSN.
8. Receiver ON and low battery indication
– When the Unit is turned on the LED is solid
green.
If the LED blinks then the battery charge is
low. Please connect to the AC power adaptor
to charge.
9. Charge Indication LED – A red LED
shows battery is charging.
A Green LED shows battery is fully charged
10. DC 5V Power Input – Connect the included AC power adaptor to power
and/or charge the receiver battery (when the receiver is not placed in the
optional Charge cradle)
11. A/V Out Port (Optional Use) – Connect the included A/V cable to view
video from a TV or monitor, or record transmissions on a DVD recorder/VCR.
NOTE: Using this feature will disable the LCD screen. The LCD screen will turn
back on when the A/V cable is disconnected.
8
12. / Button – Press the button to start or stop
the built-in tunes
13.
Button – Press the button to play next tune.
14. TALK Button – Press down and hold the button
to talk back to the camera currently being displayed
on the LCD screen.
15. Power Slide Switch – Slide the switch to ON or
OFF position to switch on/off the receiver.
16. Alarm +/-Button – Press to
increase or decrease the volume of the
audio alarm.
17. Night Light Button – Press to
remotely turn on/off the night light on the
camera (for the camera currently being
displayed on the LCD screen). When
the night light is on, an indication icon
will be displayed on the LCD screen.
18. Antenna Locking Switch – Slide
the switch to unlocking position, the
receiver antenna will pop up. Then you
can adjust the antenna to the vertical
position for better signal reception.
19. Speaker – Produces the sound transmitted from the camera(s).
NOTE: You must have more than one camera configured on the system when
using the functions that requires more than one camera.
|
9
Wireless Receiver Installation
After opening the box, fully charge the monitor before use. After initial charge,
recharge as needed.
1. Place the receiver in a place that will have clear reception with your
camera(s).
2. If you wish to view the receiver images on a larger screen, connect the
included AV cable to the receiver, and connect the other end of the cable to the
Video IN (Yellow) and Audio IN (White) ports on the TV, VCR or other
viewing/recording device.
If you wish to view the receiver images on a computer, connect one end of the
included USB cable to the receiver, and connect the other end of the cable to
the USB port on the computer. You will need to install drivers contained in the
enclosed disc first.
NOTE: When using with a TV or computer monitor, the picture may appear to
be grainy as the camera limits video resolution to VGA (640x480 pixels). This is
not a product defect. For best performance, use with the TV/Monitor PIP
(Picture in Picture) function.
Check your TV/Monitor product manual to see if this feature is available on your
TV/Monitor. This allows you to view TV or other video source and see video
from the camera in a small window on the same screen.
Wireless Camera
Front & Back Controls
1. Camera Antenna – Sends & receives signals to or from the receiver.
2. Night Light Switch – Press to turn the night light ON or OFF. Alternatively,
press the light button on the receiver to remotely turn the camera light ON or
OFF.
Note: Night Light is available only when the camera is paired to the receiver.
3. Lens/IR LED Cover – Infrared LED’s provide viewing in no/low light
conditions
4. Temperature Sensor ㅡ Gives an indication of the air temperature where the
camera is placed
Loading...