Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of
•
the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect
to the screen. Damages caused by the above effect are not covered by the Warranty.
Contents
CONNECTING AND PREPARING YOUR TV
List of Parts ........................................................ 2
Installing the Wall Mount Kit ............................... 2
Viewing the Control Panel .................................. 3
Viewing the Connection Panel ........................... 4
Viewing the Remote Control ............................... 6
Installing Batteries in the Remote Control .......... 7
Switching On and Off ......................................... 7
Placing Your Television in Standby Mode........... 7
Viewing the Menus ............................................. 8
Using the TOOLS Button .................................... 8
Plug & Play ......................................................... 9
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
Remote Control &
Batteries (AAA x 2)
Owner’s Instructions
•
➣
Warranty card / Safety Guide / Registration Cards (Not available in all locations)
Power CordProgram CDCover-BottomCleaning Cloth
Warranty card
•
Safety Guide
•
Installing the Wall Mount Kit
Wall mount items (sold separately) allow you to mount
the TV on the wall.
For detailed information on installing the wall mount,
see the instructions provided with the Wall Mount items.
Contact a technician for assistance when installing the
wall mounted bracket.
Samsung Electronics is not responsible for any damage
to the product or injury to yourself or others if you elect to
install the TV on your own.
Do not install your Wall Mount Kit while your TV is
turned on. It may result in personal injury due to
electric shock.
Remove the stand and cover the bottom hole with a
➣
cap and fasten with two screws.
Registration Cards
•
English - 2
Viewing the Control Panel
88
4
1
2
3
6
5
7
The product colour and shape may vary depending on the model.
➣
Front Panel buttons
Touch each button to
operate.
SOURCE
1
Toggles between all the available input sources
(TV, AV1, AV2, S-Video, Component1,
Component2, PC, HDMI1, HDMI2, HDMI3,
HDMI4). In the on-screen menu, use this button
as you use the
control.
MENU
2
Press to see an on-screen menu of your
features.
- VOL +
3
Press to decrease or increase the volume.
In the on-screen menu, use the - VOL + buttons
as you use the ◄ and ► buttons on the remote
control.
4
Press to change channels.
In the on-screen menu, use the
buttons as you use the ▼ and ▲ buttons on
the remote control.
(Without the Remote Control, you can turn on
the TV by using the Channel buttons.)
ENTER
button on the remote
TV’s
English - 3
5
Power Indicator
Blinks and turns off when the power is on and
lights up in stand-by mode.
POWER
6
Press to turn the TV on and off.
Remote Control Sensor
7
Aim the remote control towards this spot on
the TV.
Speakers
8
Viewing the Connection Panel
1
2345
[Side Panel Jacks]
3
6
7
8
@
The product colour and shape may vary depending on the model.
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
➣
When connecting an external device, match the colour of the connection terminal to the cable.
➣
1 PC IN [PC] / [AUDIO]
-
Connect to the video and audio output jack on your PC.
2 Connecting External
Connect RCA cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
-
Connect RCA audio cables to [R - AUDIO - L] on the rear of your set and the other ends to
-
corresponding audio out connectors on the A/V device.
HDMI IN 1, HDMI IN 2, HDMI IN 3, HDMI IN 4
3
Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)
-
No additional Audio connection is needed for an HDMI to HDMI connection.
-
When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
-
➣
What is HDMI?
-
“High Denition Multimedia interface” allows the transmission of high denition digital video data
and multiple channels of digital audio.
-
The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate
cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller
in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and
supports multi - channel digital audio.
The TV may not output sound and pictures may be displayed with abnormal colour when DVD
➣
players/Cable Boxes/Satellite receivers supporting HDMI versions older than 1.3 are connected.
When connecting an older HDMI cable and there is no sound, connect the HDMI cable to the
HDMI IN 2 jack and the audio cables to the DVI IN (HDMI2) [R-AUDIO-L] jacks on the back of
the TV. If this happens, contact the company that provided the DVD player/Cable Box/Satellite
receiver to conrm the HDMI version, then request a rmware update. HDMI cables that are not
1.3 may cause annoying icker or no screen display.
!
A/V Devices (AV IN 1)
Power Input
90
English - 4
DVI IN(HDMI2) [R-AUDIO-L]
DVI audio outputs for external devices.
-
➣
Supported modes for HDMI/DVI and Component
HDMI/DVI 50HzXXXOOOO
HDMI/DVI 60HzXOXXOOO
ComponentOOOOOOO
480i480p576i576p720p1080i1080p
4 ANT IN
To view television channels correctly, a signal must be received by the set from one of the following
sources:
An outdoor aerial / A cable television network / A satellite network
-
5 SER
VICE
Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV viewing
angle using your remote control.
6 WISELIN
-
7 S-VIDEO or VIDEO / R-AUDIO-L
-
K
Connect a USB mass storage device to view movies and photos and listen to music les.
Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or
Camcorder.
Connect RCA audio cables to [R-AUDIO-L] on your set and the other ends to corresponding audio out
-
connectors on the A/V device.
8
HEADPHONES JACK
Headphone may be connected to the headphone output on your set. While the head phone is
-
connected, the sound from the built-in speakers will be disabled.
9 AUDIO OU
Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends to
-
T [R-AUDIO-L]
corresponding audio in connectors on the Amplier or DVD Home Theatre.
0 COMPONEN
Connect component video cables (optional) to component connector ("P
-
T IN 1,2
R", "PB", "Y") on the rear of your
set and the other ends to corresponding component video out connectors on the DVD.
If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the DVD
-
and connect the DVD to component connector ("P
The P
R, PB and Y connectors on your component devices (DVD) are sometimes labeled Y, B-Y and R-Y
-
R", "PB", "Y") on your set.
or Y, Cb and Cr.
Connect RCA audio cables (optional) to [R - AUDIO - L] on the rear of your set and the other ends to
-
corresponding audio out connectors on the DVD.
! LAN
Connect a LAN cable to this port to connect to the Network.
-
@
Kensington Lock (depending on the model)
The Kensington Lock (optional) is a device used to physically x the system when used in a public
-
place.
If you want to use a locking device, contact the dealer where you purchased the TV.
-
The location of the kensington lock may be different depending on its model.
-
English - 5
Viewing the Remote Control
1 Television Standby button
2
Selects the TV mode
directly
3
Number buttons for direct
channel access
4
One/Two-digit channel
selection
5
+ : Volume increase
– : Volume decrease
6
Available source selection
7
It display "Channel List"
on the screen.
8
Use to quickly select
frequently used functions.
9
Use to see information on
the current broadcast
0
Colour buttons :
Use these buttons in
the Channel list and
WISELINK, etc.
@
Press to select the optional
display and sound modes
for sports, cinema and
games.
#
Use these buttons in
the DMA, WISELINK
and Anynet+. (: This
remote can be used
to control recording on
Samsung recorders with
the Anynet+ feature)
$ Press to backlight the
buttons on the remote.
This function is convenient
for using at night or when
the room is dark. (Using
the remote control with the
ON/OFF
set to On will reduce the
battery usage time.)
% Previous channel
^
Temporary sound switch-
off
&
P : Next channel
P : Previous channel
light button
*
Displays the main on-
screen menu
(
This function enables you
to view and play photo
and music files from an
external device.
)
Returns to the previous
menu
a
Control the cursor in the
menu.
Use wheel button
in the Content Library,
WISELINK Pro, and
Product Guide menus.
* Teletext index
) Teletext hold
b Teletext cancel
Teletext previous
page
select
Teletext,
The performance of the remote control may be affected by bright light.
➣
English - 6
Installing Batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the gure.
2. Install two AAA size batteries.
Make sure to match the "+" and "–" ends of the batteries with the
➣
diagram inside the compartment.
3
. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be
➣
using the remote control for a long time.
Using the remote control with the ON/OFF
➣
reduce the battery usage time.
➣
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special uorescent light or neon sign nearby?
light button set to On will
Switching On and Off
The mains lead is attached to the rear of your set.
1. Plug the mains lead into an appropriate socket.
➣
The standby indicator lights up
2. Press the P button
You also can press the POWERP button or the TV button on the remote control to turn the TV
➣
on.
The programme that you were watching last is reselected automatically.
➣
3
. Press the numeric button (0~9) or channel up/down (
button
on your set.
When you switch the set on for the very rst time, you will be asked to choose language in which the
➣
menus are to be displayed.
4. To switch your set off, press the POWERP button again.
on your set.
on your set.
/ ) button on the remote control or
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. The standby
mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1. Press the POWERP button on the remote control.
➣
The screen is turned off and a red standby indicator appears on your set.
. To switch your set back on, simply press the POWERP, numeric buttons (0~9), T
2
up/down ( / ) button again.
Do not leave your set in standby mode for long periods of time (when you are away on holiday, for
➣
example).
It is best to unplug the set from the mains and aerial.
English - 7
V button or channel
Viewing the Menus
1. With the power on, press the MENU button.
The main menu appears on the screen. The menu’ s left side has
icons: Picture, Sound, Channel, Setup, Input.
2
. Press the ▲ or ▼ button to select one of the icons.
Then press the
ENTER
button to access the icon’s sub-menu.
3. Press the EXIT button to exit.
The on-screen menus disappear from the screen after about
➣
one minute.
Using the TOOLS Button
You can use the TOOLS button to select your frequently
used functions quickly and easily. The “Tools” menu change
depending on which external input mode you are viewing.
1. Press the TOOLS button.
The “Tools” menu will appear.
. Press the ▲ or ▼ button to select a menu.
2
3. Press the ▲/▼/◄/►/
use the selected items. For a more detailed description of each
function, refer to the corresponding page.
Anynet+ (HDMI-CEC), see page 62
♦
Picture Mode, see page 15
♦
Sound Mode, see page 21
♦
Sleep Timer, see page 23
♦
SRS TS XT, see page 21
♦
Energy Saving, see page 26
♦
Dual l-ll, see page 22
♦
PIP, see page 20
♦
Auto Adjustment, see page 34
♦
ENTER
buttons to display, change, or
TV
Mode : Standard
acklight 7
B
Contrast 95
Brightness 40
Sharpness 50
Colour
Tint G50 R50
Detailed Settings sMore
Move Enter Return
Anynet+ (HDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual l-ll : Mono
Move Enter Exit
Picture
50
Tools
English - 8
Plug & Play
When the TV is initially powered on, several basic settings
proceed automatically and subsequently. The following
settings are available.
1. Press the POWER
The message "Start Plug & Play" is displayed with "OK" selected.
2. Select the appropriate language by pressing the
Press the
3. Press the
then the
➣
➣
➣
4
. The message "Check antenna input." is displayed with "OK" selected.
Press the
➣
5
. Select the appropriate area by pressing the
Press the
6.
The "Auto Store" menu is displayed with the "Start" selected. Press the
➣
➣
➣
7
. Press the
Select the "Month", "Day" , "Year", "Hour", "Minute", or "am/pm" by pressing the ◄ or ► button.
Set the "Month", "Day" , "Year", "Hour", "Minute", or "am/pm" by pressing the ▲ or ▼ button.
➣
8
. Press the
When you have nished, press the
➣
♦
♦
♦
♦
ENTER
◄
ENTER
We recommend setting the TV to "Home Use" mode for the best picture in your home
environment.
"Store Demo" mode is only intended for use in retail environments.
If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use”
(Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and
hold the MENU button on the TV for 5 seconds.
ENTER
Please check that the antenna cable is connected correctly.
ENTER
The channel search will start and end automatically.
Press the
After all the available channels are stored, the "Clock Set" menu appears.
ENTER
You can also set the “Month”, “Day”, “Year”, “Hour” and "Minute" by pressing the number buttons
on the remote control.
ENTER
Even if the
several seconds.
Language: Select your language.
Area: Select your area.
Auto Store: Automatically scans for and stores channels available in the local area.
Clock Set: Sets the current time for the TV clock.
button on the remote control.
▲
▲
or ▼ button.
button.
or ▼ button.
ENTER
button to conrm your choice.
or ► button to select “Store Demo” or “Home Use”,
button.
button.
button to conrm your choice.
ENTER
ENTER
button at any time to interrupt the memorization process.
button.
button to conrm your setting. The message “Enjoy your viewing” is displayed.
ENTER
button is not pressed, the message will automatically disappear after
Plug & Play
Start Plug & Play.
OK
Enter
button.
English - 9
If you want to reset this feature...
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER
2. Press the
button.
ENTER
button again, to select "Plug & Play".
For further details on setting up options, refer to the page 9.
The “Plug & Play” feature is only available in the TV mode.
➣
TV
Plug & Play
Language
Time
Cable Network Setup
Auto Wall-Mount
Melody : Off
Entertainment
Energy Saving
PIP
Move Enter Return
Start Plug & Play.
Return
Enter
Setup
: English
Plug & Play
Enter Return
: Off
: Off
OK
Storing Channels Automatically
You can scan for the frequency ranges available to you (and availability depends on your area).
Automatically allocated programme numbers may not correspond to actual or desired programme
numbers. However, you can sort numbers manually and clear any channels you do not wish to
watch.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER
2. Press the
button.
ENTER
button to select "Area".
3. Select the appropriate area by pressing the ▲ or ▼ button.
Press the
ENTER
button to conrm your choice.
TV
Area :
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
4. Press the ▲ or ▼ button to select "Auto Store", then press the
ENTER
5. Press the
➣
➣
button.
ENTER
button.
The TV will begin memorizing all of the available channels.
Press the
ENTER
button at any time to interrupt the memorization process and return to the
Move Enter Return
"Channel" menu.
6. After all the available channels are stored, the "Sort" menu appears. (refer to page 13)
Channel
Asia/W.Europe
English - 10
Storing Channels Manually
You can store television channels, including those received via
cable networks.
When storing channels manually, you can choose:
♦
Whether or not to store each of the channels found.
♦ The programme number of each stored channel which you wish
to identify.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER
button.
2. Press the ▲ or ▼ button to select "Manual Store", then press
the
ENTER
button.
3. Select the required option by pressing the ▲ or ▼ button, then
press the
ENTER
button.
TV
Area :
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Move Enter Return
Move Enter Return
TV
Programme : P 2
Colour System : Auto
Sound System
Channel : C 3
Search : 77 MHz
Store : ?
4. When you are satised with your setting, press the
ENTER
5. Press the EXIT button to exit.
♦
Programme (Programme number to be assigned to a channel)
-
➣
♦
Colour System:
-
♦
Sound System:
-
♦
Channel (When you know the number of the channel to be stored)
-
-
➣
➣
Search (When you do not know the channel numbers)
♦
-
-
button.
Move Enter Return
Press the ▲ or ▼ button until you nd the correct number.
You can also select the channel number directly by pressing the numeric buttons (0~9).
Auto/PAL/SECAM/NTSC4.43/NTSC3.58
Press the ▲ or ▼ button to select the required colour standard.
BG/DK/I/M
Press the ▲ or ▼ button to select the required sound standard.
Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel).
Press the ► button, then press the ▲ or ▼ button to select the required number.
You can also select the channel number directly by pressing the numeric buttons (0~9).
If there is abnormal sound or no sound, re-select the sound standard required.
Press the ▲ or ▼ button to start the search.
The tuner scans the frequency range until the rst channel or the channel that you selected is
received on the screen.
Store (When you store the channel and associated programme number)
♦
Set to "OK" by pressing the
-
➣
Channel mode
-
P (Programme mode): When completing tuning, the broadcasting stations in your area have been
ENTER
button.
assigned to position numbers from P00 to P99. You can select a channel by entering the position
number in this mode.
-
C (Air channel mode): You can select a channel by entering the assigned number to each air
broadcasting station in this mode.
-
S (Cable channel mode): You can select a channel by entering the assigned number for each cable
channel in this mode.
Channel
Asia/W.Europe
Manual Store
: BG
English - 11
Adding / Locking Channels
Using the Channel Manager, you can conveniently lock or add
channels.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER
2. Press the ▲ or ▼ button to select "Channel Manager", then
press the
♦ Adding channels
Using
3. Select Channel List by pressing the
4. Move to the (
button, select a channel to be added, and press the
ENTER
➣
➣
button.
ENTER
button.
the Channel List, you can add channels.
ENTER
button.
) eld by pressing the ▲, ▼, ◄ or ►
button to add the channel.
If you press the
ENTER
button again, the ( ) symbol
next to the channel disappears and the channel is not
added.
“
” is active when "Child Lock" is selected to "On".
TV
Area :
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Move Enter Return
TV
Channel List
Child Lock
Move Enter Return
Channel
Channel Manager
: Off
Asia/W.Europe
♦ Locking channels
This feature allows you to prevent unauthorized users, such as
children, from watching unsuitable programmes by muting out
video and audio.
5. Press the ▲ or ▼ button to select "Child Lock", then press the
ENTER
button.
6. Select "On" by pressing the ▲ or ▼ button, then press the
ENTER
button.
7. Press the ▲ or ▼ button to select "Channel List", then press
the
ENTER
8. Move to the (
select a channel to be locked, and press the
button.
) eld by pressing the ▲, ▼, ◄ or ► button,
ENTER
button.
➣
If you press the
ENTER
button again, the ( ) symbol
next to the channel disappears and the channel lock is
cancelled.
➣
A blue screen is displayed when "Child Lock" is activated.
9. Press the EXI
➣
Select "On" or "Off" in "Child Lock" to easily turn the channels which selected on "
T button to exit.
or inactive.
You can select these options by simply pressing the CH LIST
button on the remote control.
Channel List
P 1 C3
Prog.
0 C--
1 C
3
2 BBC 1
3 C74
4 C75
5 C76
6 S3
7 S4
8 S6
9 S7
Add Lock
Enter
Move
Page Return
1 / 10
" to be active
English - 12
Sorting the Stored Channels
This operation allows you to change the programme numbers
of the stored channels.
This operation may be necessary after using the auto store.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER
button.
2. Press the ▲ or ▼ button to select "Sort", then press the
ENTER
button.
3. Select the channel number that you wish to change by
pressing the ▲ or ▼ button.
Press the
➣
ENTER
button.
The selected channel number and name are moved to right
side.
4
. Select the number of the programme to which the channel is to
be moved by pressing the ▲ or ▼ button.
5
. Press the
ENTER
button. The channel is moved to its new
position and all other channels are shifted accordingly.
6. Repeat steps 3 to 5 for another channel to be sorted.
7
. Press the EXIT button to exit.
TV
Area :
Auto Store
Manual Store
Channel Manager
Sort
Name
Tune
Fine
Move Enter Return
TV
Prog. Ch. Name
C--
0
1 C23
2 C1
3 C3
4 S1
s
Move Enter Return
Assigning Channels Names
Channel names will be assigned automatically when channel
information is broadcast. These names can be changed,
allowing you to assign new names.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER
button.
2. Press the ▲ or ▼ button to select "Name", then press the
ENTER
button.
3. If necessary, select the channel to be assigned to a new
name by pressing the ▲ or ▼ button. Press the
ENTER
button
The selection bar is displayed around the name box.
➣
4
.
To...Then...
Select a letter, number or symbol Press the ▲ or ▼ button
Move on the next letterPress the ► button
Move back the previous letterPress the ◄ button
Conrm the name
➣
The following characters are available: Letters of the alphabet (A~Z) / Numbers (0~9) / Special
Press the
ENTER
button
characters (+, -, *, /, space)
. Repeat steps 3 to 4 for each channel to be assigned to a new name.
5
6
. Press the EXIT button to exit.
TV
Area :
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Move Enter Return
V
T
Prog. Ch. Name
C-- -----
0
1 C23 ----2 C16 ----3 C3 ----4 S1 ---- s
Move Enter Return
Channel
Asia/W.Europe
Sort
6
Channel
Asia/W.Europe
Name
English - 13
Fine Tuning Channel Reception
Use fine tuning to manually adjust a particular channel for
optimal reception.
1. Use the number buttons to directly select the channel that
you want to ne tune.
2. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER
3. Press the ▲ or ▼ button to select "Fine
the
ENTER
button.
Tune", then press
button.
4. Press the ◄ or ► button to adjust the ne tuning.
Press the
ENTER
button.
5. Press the EXIT button to exit.
Fine tuned channels that have been saved are marked with
➣
an asterisk "*" on the right-hand side of the channel number
in the channel banner. And the channel number turns red.
➣
To reset the ne-tuning, select "Reset" by pressing the ▲ or ▼
button and then press the
ENTER
button.
TV
Area :
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine
Move Enter Return
P 1
Adjust Save Return
Channel
Asia/W.Europe
Tune
Fine Tune
Reset
0
English - 14
Changing the Picture Standard
You can select the type of picture which best corresponds to
your viewing requirements.
1. Press the MENU button to display the menu.
Press the
2. Press the
3. Press the ▲ or ▼ button to select the desired picture effect.
Press the
4. Press the EXIT button to exit.
♦
♦
♦
The Picture mode must be adjusted separately for each input
➣
source.
You can also press the P.MODE button on the remote control to
select one of the picture settings.
ENTER
ENTER
ENTER
button, to select "Picture".
button again, to select "Mode".
button.
Dynamic: Selects the picture for high-definition in a bright
room.
Standard: Selects the picture for optimum display in a
normal environment.
Movie: Selects the picture for comfortable display in a dark
room.
2. Press the ▲ or ▼ button to select “Picture Mode”.
3. Press the ◄ or ► button to select the desired picture mode.
4. Press the EXIT or TOOLS button to exit.
Anynet+ (HDMI-CEC)
Picture Mode ◄ Standard ►
Sound Mode
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual l-ll : Mono
Move Adjust Exit
Tools
: Custom
English - 15
Adjusting the Custom Picture
Your set has several settings which allow you to control picture
quality.
1. T
o select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
2. Press the ▲ or ▼ button to select a particular item. Press the
ENTER
button.
3. Press the ◄ or ► button to decrease or increase the value of a
particular item. Press the
ENTER
button.
4. Press the EXIT button to exit.
Backlight: Adjusts the screen brightness by adjusting the LCD
♦
backlight brightness. (0~10)
Contrast: Adjusts the lightness and darkness between objects
♦
and the background.
rightness: Adjusts the brightness of the whole screen.
B
♦
Sharpness: Adjusts the outline of objects to either sharpen them
♦
or make them more dull.
Colour: Adjusts the colours, making them lighter or darker.
♦
Tint: Adjusts the colour of objects, making them more red or
♦
green for a more natural look.
The adjusted values are stored according to the selected Picture mode.
➣
In PC mode, you can only make changes to "Backlight”, “Contrast" and “Brightness”.
➣
TV, AV1, AV2, S-Video modes of the PAL system, you cannot use the "Tint" Function.
➣
You can return to the factory defaults picture settings by selecting the "Reset".
➣
(Refer to "Resetting the Picture Settings to the Factory Defaults" on page 19)
The energy consumed during use can be signicantly reduced if the level of brightness of the picture
➣
is reduced, and then this will reduce the overall running cost.
TV
Mode : Standard
acklight 7
B
Contrast 95
Brightness 40
Sharpness 50
Colour
Tint G50 R50
Detailed Settings sMore
Move Enter Return
▲
Backlight
▼
Move Adjust Return
Picture
50
7
Conguring Detailed Settings on the Picture
You can set detailed picture settings.
1. Press the MENU button to display the menu.
Press the
2. Press the
ENTER
ENTER
button, to select "Picture".
button to select “Mode”.
Press the ▲ or ▼ button to select “Standard” or “Movie”, then
press the
ENTER
button.
3. Press the ▲ or ▼ button to select "Detailed Settings", then press
the
ENTER
button.
4. Select the required option by pressing the ▲ or ▼ button, then
press the
5. When you are satised with your setting, press the
ENTER
button.
ENTER
button.
6. Press the EXI
"Detailed Settings" is available in "Standard" or "Movie" mode.
➣
➣
In PC mode, you can only make changes to “Dynamic Contrast”,
T button to exit.
“Gamma” and “White Balance” from among the “Detailed
Settings” items.
♦
B
lack Adjust: Off/Low/Medium/High
You can directly select the black level on the screen to adjust the screen depth.
♦
Dynamic Contrast: Off/Low/Medium/
High
You can adjust the screen contrast so that the optimal contrast is provided.
English - 16
TV
Mode : Standard
acklight 7
B
Contrast 95
Brightness 40
Sharpness 50
Colour
Tint G50 R50
Detailed Settings sMore
Move Enter Return
TV
Black Adjust : Off
Dynamic Contrast
Gamma : 0
Colour Space : Native
White Balance
Flesh
Edge Enhancement
xvYCC
Move Enter Return
Picture
50
Detailed Settings
: Medium
Tone : 0
: Off
: Off
Gamma: -3 ~ +3
♦
You can adjust the Primary Colour (Red, Green, Blue) Intensity.
Press the ◄ or ► button until you reach the optimal setting.
Colour Space: Auto/Native/Custom
♦
Colour space is a Colour matrix composed of “Red”, “Green” and “Blue” Colours.
Select your favourite Colour space to experience the most natural Colour.
♦ Auto: Auto Colour Space automatically adjusts to the most natural colour tone based on
programme sources.
♦ Native: Native Colour Space offers deep and rich colour tone.
♦ Custom: Adjusts the colour range to suit your preference.
Customizing the Colour Space
➣
Colour:
Red/Green/Blue/Yellow/Cyan/Magenta
Adjusts the Colour range to suit your preference.
“Colour” is available when “Colour Space” is set to “Custom”.
Press the ▲ or ▼ button to select “Red”, “Green”, “Blue”, “Yellow”, “Cyan” or “Magenta”.
Press the EN
Red/Green/Blue: In “Colour”, you can adjust the RGB values for the selected colour.
Press the ▲ or ▼ button to select "Red", "Green" or "Blue" to change it.
Press the EN
Press the ◄ or ► button to decrease or increase the value of a particular item. Press the
EN
TER button.
Reset: Resets the colour space to the default values.
You can adjust the colour temperature for more natural picture colours.
R-Offset/G-Offset/
adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the
Press the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted white balance will be reset to the factory defaults.
Flesh
Tone: -15 ~ +15
You can emphasize the pink 'flesh tone' in the picture.
Press the ◄ or ► button until you reach the optimal setting.
Changing the adjustment value will refresh the adjusted screen.
➣
Edge Enhancement: Off/On
You can emphasize object boundaries in the picture.
xvYCC: Off/On
Setting the xvYCC mode to On increases detail and colour space when watching movies from an
external device (ie. DVD player) connected to the HDMI or Component IN jacks. You must set the
Picture Mode to Movie to enjoy this feature.
➣
Only available in "HDMI" and "Component" on "Movie" mode.
If xvYCC function is active, PIP cannot be selected.
➣
TER button.
TER button.
B-Offset/R-Gain/G-Gain/B-Gain: Changing the adjustment value will refresh the
ENTER
button.
English - 17
Conguring Picture Option
1. Press the MENU button to display the menu.
Press the
ENTER
button, to select "Picture".
2. Press the ▲ or ▼ button to select "Picture Options", then press
the
ENTER
button.
TV
More
Picture Options
Reset
3. Select the required option by pressing the ▲ or ▼ button, then
press the
4. When you are satised with your setting, press the
button.
5. Press the EXI
➣
Colour
♦
You can select the most comfortable colour tone to your eyes.
➣
ENTER
button.
ENTER
T button to exit.
In PC mode, you can only make changes to the “Colour
Tone” and “Size” from among the items in “Picture Options”.
Tone: Cool2/Cool1/Normal/Warm1/Warm2
The adjusted values are stored according to the selected
Move Enter Return
TV
Colour Tone : Normal
Size
Digital NR : Auto
DNIe
HDMI Black Level
100Hz Motion Plus
Blue Only Mode
Move Enter Return
"Picture" mode.
When the picture mode is set to Dynamic or Standard, Warm1 and Warm2 cannot be selected.
➣
Size: 1
♦
6:9/Wide Zoom/Zoom/4:3/Just Scan
You can select the picture size which best corresponds to your viewing requirements.
16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
♦
Wide Zoom: Magnify the size of the picture more than 4:3.
♦
Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
♦
4
♦
:3: This is the default setting for a video movie or normal broadcasting.
♦
Just Scan: Use the function to see the full image without any cutoff when HDMI (720p/1080i/
1080p) or Component (1080i/1080p) signals are input.
In PC Mode, only "16:9" and "4:3" mode can be adjusted.
➣
Settings can be adjusted and stored for each external device you have connected to an input of
➣
the TV.
Temporary image retention may occur when viewing a static image on the set for more than two
➣
hours.
"Wide Zoom": Move the screen up/down using the ▲ or ▼ button after selecting the
➣
pressing the ► or ENTER button.
"Zoom": Select
➣
by pressing the ◄ or ►button. Use the ▲ or ▼ button to move the picture up
and down. After selecting , use the ▲ or ▼ button to magnify or reduce the picture size in the
vertical direction.
When Double (
➣
After selecting “Just Scan” in HDMI (1080i/1080p) or Component (1080i/1080p) mode:
➣
Select
by pressing the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture.
, ) mode has been set in PIP, the Picture Size cannot be set.
Reset: Press the ◄ or ► button to select “Reset”, then press the ENTER button.
You can initialize the setting.
If you use the “Just Scan” function with HDMI 720p input, 1 line will be cut at the top, bottom, left
➣
and right as in the overscan function.
Picture
: OK
Picture Options
: 16:9
: Off
: Normal
: Off
: Off
by
You can select these options by simply pressing the P.SIZE
button on the remote control.
English - 18
Digital NR: Off/Low/Medium/High/Auto
♦
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction
feature to help reduce any static and ghosting that may appear on the screen.
When the signal is weak, select one of the other options until the best picture is displayed.
➣
DNIe: Off/ Demo/On
♦
This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you can
view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the applied
DNIe and normal pictures on the screen, for demonstration purposes. Using this function, you can view
the difference in the visual quality.
DNIe™ (Digital Natural Image engine)
➣
This feature brings you more detailed image with 3D noise reduction, detail enhancement,
contrast enhancement and white enhancement. New image compensation Algorithm gives
brighter, clearer, more detailed image to you.
eyes.
This function is not available in "Movie" and "Standard" mode.
➣
H
DMI Black Level: Normal/Low
♦
You can directly select the black level on the screen to adjust the screen depth.
➣
This function is active only when the external input connects to HDMI(RGB signals).
♦
Hz Motion Plus: Off/Low/Medium/High/Demo
100
Removes drag from fast scenes with a lot of movement to provide a clearer picture.
➣
This function is not available in PC mode.
If you enable "100 Hz Motion Plus", noise may appear on the screen.
➣
If this occurs, set "100Hz Motion Plus" to "off" or select one of the other options.
Blue Only Mode: Off/On
♦
This function is for AV device measurement experts. This function displays the blue signal only by
removing the red and green signals from the video signal so as to provide a Blue Filter effect that is
used to adjust the Colour and Tint of video equipment such as DVD players, Home Theaters, etc.
Using this function, you can adjust the Colour and Tint to preferred values appropriate to the signal
level of each video device using the Red/Green/Blue/ Cyan/Magenta/Yellow Colour Bar Patterns,
without using an additional Blue Filter.
➣
“Blue Only Mode” is available when the picture mode is set to “Movie” or “Standard”.
DNIe™ technology will t every signal into your
Resetting the Picture Settings to the Factory Defaults
You can return to the factory defaults picture settings.
o select the desired picture effect, follow the "Changing the
1. T
Picture Standard" instructions number 1 to 3 (On page 15).
2. Press the ▲ or ▼ button to select "Reset", then press the
ENTER
3. Press the ▲ or ▼ button to select "OK" or "Cancel".
Press the
4. Press the EXIT button to exit.
The "Reset" will be set for each "Picture" mode.
➣
button.
ENTER
button.
English - 19
TV
More
Picture Options
Reset : O
Move Enter Return
Picture
OK
K
Cancel
Viewing the Picture In Picture (PIP)
You can display a sub picture within the main picture of set
programme or video input. In this way, you can watch the
picture of set programme or video input from any connected
equipment while watching the main picture.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER
button.
2. Press the▲ or ▼ button to select "PIP", then press the
ENTER
3. Press the
button.
ENTER
button to select “PIP”.
Press the▲ or ▼ button to select "On", then press the
ENTER
button.
4. Select the required option by pressing the ▲ or ▼ button, then press the EN
5. When you are satisfied with your setting, press the
TER button.
ENTER
button.
6. Press the EXIT button to exit.
➣
You may notice that the picture in the PIP window becomes
slightly unnatural when you use the main screen to view a game
or karaoke.
Easy Setting
1. Press the TOOLS button on the remote control.
. Press the ▲ or ▼ button to select “PIP”, then press the
2
ENTER
button.
3. Press the ◄ or ► button to select the “On”.
4. Press the ▲ or ▼ button to select a particular item.
5. Press the ◄ or ► button to select the required option.
6.
♦
PIP: On/Off
Press the EXI
T or TOOLS button to exit.
You can activate or deactivate the PIP function.
Main pictureSub picture
Component 1, 2 TV, AV1, AV2
HDMI 1, 2, 3, 4TV, AV1, AV2
PCTV, AV1, AV2
Source
♦
You can select a source of the sub-picture.
Size:
♦
/ /
You can select a size of the sub-picture.
If main picture is in "HDMI" mode, "Size" is available.
➣
Position:
♦
/ / /
You can select a position of the sub-picture.
➣
♦
Programme
In Double (
, ) mode, "Position" cannot be selected.
You can select a channel of the sub-picture only when the "Source" is set to "TV".
TV
TV
Anynet+ (HDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
PIP
PIP : ◄ On ►
Source
Programme : P 1
Size :
Position :
Setup
Plug & Play
: English
Language
Time
Cable Network Setup
Auto Wall-Mount
Melody : Off
Entertainment
Energy Saving
PIP
Move Enter Return
Mode : Custom Equalizer
PIP : On
TS XT : Off
SRS
: TV
Source
olume : Off
Auto V
:
Size
Internal Mute
Position
Reset
Programme
Move Enter Return
Move Enter Return
Move Enter Exit
: TV
Move Adjust Return
: Off
: Off
PIP
: Off
:
: P 1
Tools
PIP
English - 20
Sound Features
1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Sound", then press the ENTER button.
2. Select the required option by pressing the ▲ or ▼ button, then
press the
3. When you are satised with your setting, press the
button.
4. Press the EXIT button to exit.
♦
Mode: Standard/Music/Movie/Speech/Custom
You can select the type of special sound effect to be used when
watching a given broadcast.
Easy Setting
1. Press the TOOLS button on the remote control.
2
3. Press the ◄ or ► button to select the desired sound mode.
Sleep
SRS TS XT : Off
Energy Saving : Off
Dual l-ll : Mono
Move Adjust Exit
Sound
TS XT : Off
olume : Off
: Main
Tools
Equalizer: Balance/100Hz/300Hz/1kHz/3kHz/10kHz
♦
TV
Equalizer
The sound settings can be adjusted to suit your personal
preferences.
If you make any changes to these settings, the sound mode
➣
is automatically switched to "Custom".
Balance 100Hz 300Hz 1kHz 3kHz 10kHz
Move Adjust Return
SRS
TS XT: Off/On
♦
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel
content over two speakers. TruSurround delivers a compelling, virtual surround sound experience
through any two-speaker playback system, including internal television speakers. It is fully compatible
with all multichannel formats.
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select “SRS TS XT”.
3. Press the ◄ or ► button to select the "Off" or "On".
4. Press the EXI
T or TOOLS button to exit.
Anynet+ (HDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT ◄
Energy Saving
Dual l-ll : Mono
Move Adjust Exit
Tools
: Off
Off ►
TruSurround XT, SRS and Symbol are trademarks of SRS Labs, Inc.
TruSurround XT technology is incorporated under license from SRS Labs,
Inc.
♦
Auto Volume: Off/On
Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume
every time the channel is changed. This feature lets you automatically adjust the volume of the
desired channel by lowering the sound output when the modulation signal is high or by raising the
sound output when the modulation signal is low.
English - 21
Loading...
+ 52 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.