Read these simple guidelines. Failure to comply with
them may be dangerous or illegal. For more detailed
safety information, see “Safety Information” on page
124.
Road safety comes first
Do not use a hand-held phone while driving; park the
vehicle first. Remember that in some countries, it is
illegal to use a hand-held phone while driving.
Switch off when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switch off in aircraft
Wireless phones can cause interference. Using them
on aircraft is both illegal and dangerous.
Switch off in hospital
Follow any regulations or rules. Switch the phone off
near any medical equipment.
Respect special regulations
Follow any special regulations in force in any are a
and always switch off your phone whenever it is
forbidden to use it, or when it may cause interf e re n c e
or danger (in a hospital for example).
Interference
All wireless phones may be subject to radio
interference, which may affect their performance.
45
Safety Precautions
Use qualified servicing
Only qualified service personnel must repair
equipment.
Use sensibly
Use only in the normal position (to the ear). Do not
touch the antenna unnecessarily when the phone is
switched on.
Emergency calls
E n s u re the phone is switched on and in service.
Enter the emergency number and press . Give your
location. Do not end the call until told to do so.
IMPORTANT! Only SAMSUNG-approved
accessories and batteries should be used with this
product. The use of any other power accessory will
invalidate any approval or warranty applying to the
phone, and may be dangerous.
U n p a c k i n g
Your package contains the following items *.
PhoneTravel Adapter
Battery
String
Wearable Ear Microphone
Hand Strap
Owner’s Manual
In addition, you can obtain the following accessories
for your phone from your local SAMSUNG dealer:
• DeskTop Cradle
• Car Adapter
• Slim and Standard batteries
• PC Data Link Kit
* The items may vary depending on your country or service provider.
76
Your Phone
Your Phone
Phone Layout
The following illustration shows the main elements
of your phone.
Service light
Earphone jack
Volume
During a call, adjusts
the earpiece volume.
In idle mode with the
flip cover open, the
keys adjust the key
tone volume.
Microphone
Antenna
Earpiece
Display
Left/Right Soft keys perform the functions
indicated by the text above them (in the
bottom line of the display).
Menu browse keys. In the menu facility,
scrolls through the menu options and
phonebook memory.
Deletes characters from the display.
c
In idle mode, it allows you to quick access to
the WWW services.
Makes or answers a call.
In idle mode, recalls the last number dialled.
In the menu facility, selects a menu function or
s t o res information that you have entered (such
as a name) in the phone or SIM memory.
Ends a call. Also switches the phone on and off
when pressed and held.
In the menu facility, returns to the idle mode
and cancels your input.
Enters numbers, letters and some special
characters.
Used for various purposes in different functions.
Flip cover
If the flip cover is
detached from the phone
either accidentally or on
purpose, it can be clipped
back on to the phone.
8
9
Your Phone
Display
Your Phone
Display Layout
The display comprises three areas.
Icons
Text and
graphic area
Menu PhoneBook
AreaDescription
First lineDisplays various icons (see opposite).
Middle linesDisplay messages, instructions and
any information that you enter
(number to be dialled, for example).
Last lineWhen the flip cover is open it shows
the functions currently assigned to
the two soft keys.
When flip cover is closed it is blank
or shows text to indicate when
diverting or AnswerPhone is set.
Soft key
indications
Icons
Signal strength : Shows the received
signal strength. The greater the number
of bars, the better the signal strength.
Service: Appears when a call is in
progress.
New Message: Appears when a new
text message has been received.
New Voice Mail: Appears when a new
voice mail message has been received.
Vibrator on: Appears when the vibrate
mode is on. An incoming call will vibrate
the phone rather than ring it.
Alarm on: Appears when you set an
alarm.
Battery strength: Shows the level of
your battery. The more bars you see, the
more power you have left.
10
11
Your Phone
Backlight
Getting Started
The display and keypad are illuminated by a
backlight. When you open the flip or press any key,
the backlight comes on. If you press and hold one of
the volume keys with the flip cover closed, the
display backlight switches on. The backlighting
automatically switches off if no key is pressed with a
given period of time, depending on the Backlight
option set in the Phone Settings menu. The
backlight remains on at all times when the phone is
connected to a car kit (optional).
To specify the length of time for which the backlight
is active, set the Backlight menu option (5-1-5); see
page 81 for further details.
Service Light
The service light is on the top left-hand corner of the
phone. It flashes when service is available on the
phone.
To activate or deactivatethe service light, set the
Service Light menu option (5-1-6); see page 82 for
further details.
Installing the SIM Card and the Battery
• Keep all miniature SIM cards out of the reach of
small children.
• The SIM card and its contacts can be easily
damaged by scratches or bending, so be careful
when handling, inserting or removing the card.
• Before installing the SIM card, always make sure
that the phone is switched off before removing the
battery.
1.
If necessary, switch off the phone by holding down
until the
2. Remove the battery. To do so, pull the catch above
the battery on the back of the phone (①), and lift
the battery away (②).
BYE BYE
①
message is displayed.
②
Service light
1312
Getting Started
Getting Started
3. Slide the SIM card lock back and hold it in
position.
4. Insert the SIM card ensuring that the cut corner is
top right and the gold contacts of the card face
into the phone.
5. Hold the SIM card in position and release the
card lock back to lock the SIM card into place.
6. Place the battery back on the phone. First insert
the teeth on the bottom of the battery into the
corresponding slots, then push the battery against
the back of the phone until it clicks into place.
Make sure the battery is properly installed before
switching on the power.
Note: If you need to remove the SIM card, care f u l l y
slide the SIM card lock back and then lift the
SIM card out of the SIM card slot.
1514
Getting Started
Getting Started
Charging a Battery
Your phone is powered by a rechargeable Li-ion
battery. Use only approved batteries and chargers.
Ask your local SAMSUNG dealer for further details.
N o t e: You must fully charge the battery before using
your phone for the first time. A discharg e d
b a t t e ry is fully re c h a rged in appro x i m a t e l y
9 0minutes for a slim battery, 130 minutes for a
s t a n d a rd battery.
Using a Travel Adapter
The phone can be used while the battery is charging.
1. Connect the lead from the travel
adapter to the bottom of the
phone. Check that the arrow on
the lead connector is facing
towards the front of the phone.
2. Connect the adapter to a standard AC wall outlet.
When the battery is charging, the battery icon
in the top right-hand corner of the display fills
repeatedly.
3. When charging is finished, disconnect the adapter
from the power outlet.
Disconnect the adapter from the
phone by pressing the grey tabs
on either side of the connector
and pulling the connector out.
N o t e: Do not remove the battery from the phone
while the travel adapter is being connected to
the phone.
Using a DeskTop Cradle
1. Connect the lead from the travel adapter to the
DeskTop Cradle.
2. Align the tabs at the bottom of the battery with
the corresponding slots in the Desktop Cradle and
push the battery down until you hear a click.
3. Connect the adapter to a standard AC wall outlet.
The LED on the charger indicate the following:
Red: the battery is charging.
Green: the battery is fully charged.
Yellow: the battery is not plugged in correctly or
operating at a temperature that is too high
or too low.
4. When charging is finished, disconnect the adapter
from the power outlet.
Push up and hold the catch of the Desktop Cradle
and lift the battery away.
1716
Getting Started
Getting Started
Low Battery Indicator
When the battery is weak and only a few minutes of
talk time remain, you will hear a warning tone and a
message will be repeated at regular intervals on the
display:
** Warning**
Battery Low
When the battery becomes too weak for the phone
to operate, it switches off automatically.
Switching the Phone On/Off
1. Open the flip cover.
2. Hold down for more than one second to
switch the phone on.
3. If the phone asks for a password, key in the
password and press the Ok soft key. The
password is factory set to 0000. For further
details, see page 119.
4. If the phone asks for a PIN, key in the PIN and
press the Ok soft key. For further details, see
page 120. The idle screen, illustrated below, is
displayed.
<SERVICE PROVIDER>
Sat 14 Mar 12:57
Menu Phonebook
N o t e: The display language is determined by the
SIM card inserted. To change the language,
use the L a n g u a g e menu option (5 - 1 - 3); for
f u rther details, refer to page 80.
5.
When you wish to switch the phone off, hold down
for more than two seconds.
WA R N I N G :Do not switch on the phone when
w i reless phone use is prohibited or
when it may cause interf e rence or
d a n g e r.
Note: Your phone has a built-in antenna. As with any
other radio-transmitting device, do not touch
the antenna unnecessarily when the phone is
switched on. Contact with the antenna aff e c t s
call quality and may cause the phone to
operate at a higher power level than
o t h e rwise needed.
18
19
Call Functions
Call Functions
Ending a Call
Making a Call
When the idle screen is displayed, key in the area
code and phone number and press .
N o t e:
If you have set the Auto Redial option (5 - 1 - 7) toO N(see page 82) and the person you’ve called
does not answer or the line is busy, the number
is redialled automatically up to ten times.
International Calls
1. Press and hold down for the international
prefix. The + character appears.
2. Key in the country code, area code and phone
number and press .
Correcting the Number
To clear...Then...
The last digitPress the soft key.
displayed
Any other digitPress or key until
in the numberthe cursor ( ❘ ) is immediately
to the right of the digit to be
cleared.
Press the soft key.
The whole displayHold down the soft key for
more than one second.
When you have finished your call, briefly press .
Making a Call using the Phonebook
You can store the names and phone numbers of
people you call regularly in the SIM card and phone
memory, called the phonebook. You then simply
select the required name to recall the associated
number. For further details on the Phonebook feature,
refer to page 39.
Quick dialling with the SIM location number is also
possible pressing and holding the associated digit
key for the SIM location(numbers 2 through 9).
Voice Dialling
If you have set the Active Flip option (5-1-0) to ON
(see page 83), your phone also allows you to say a
name when you open the flip cover. It then automatically dials the number stored with that name. For
further details on the Voice Dialling feature, refer to
page 67.
Last Number Redial
The phone stores the last 10 numbers dialled. To
recall any of these numbers, proceed as follows.
1. If there are any characters on the display, press
to return to idle mode.
2120
Call Functions
Call Functions
2. Press to access the list of last-dialled
numbers.
3. Use or to scroll through the Redial list
until the required number is displayed.
4. Press to dial the number displayed.
Adjusting the Volume
During a call, if you want to adjust the earpiece
volume, use the volume keys on the left side of the
phone. Press to increase and to decrease the
volume.
Answering a Call
When somebody calls you, the phone rings and the
phone icon in the middle of the screen flashes.
nnnn
(( ))
Accept Reject
If the caller can be identified, the caller’s phone
number (or name if stored in your phonebook) is
displayed. If the caller cannot be identified, only the
phone icon flashes.
1. If necessary, open the flip cover. Press or the
A c c e p t soft key.
If the Any-key Answer menu option (5 - 1 - 4) is set
to O N, you can press any key without opening the
flip to answer a call except for and the
R e j e c t soft key (see page 81).
N o t e: To reject an incoming call, press the R e j e c t
soft key or. If the Any-key Answer
menu option (5 - 1 - 4) is set to O F F, you can
reject the call by pressing or o n
the left side of the phone.
Caller’s name or
number
In idle mode with the flip cover open, you can adjust
the key tone volume using the same keys.
2. End the call by closing the flip or pressing .
N o t e:You can answer a call while using the
phonebook or menu feature s .
2322
Call Functions
Viewing Missed Calls
If you are unable to answer a call for any reasons,
you can find out who was calling you, if this service
is available. In this way, you can call the person
back, if necessary.
The number of missed calls is displayed on the idle
screen immediately after the call was missed.
To view the missed call immediately, proceed as
follows.
1. If the flip cover is...Then...
ClosedOpen the flip cover.
OpenPress the View soft key.
Call Functions
Editing a Missed Call Number
1. Press the Options soft key.
2. Press the Select soft key.
3. Change the number as required. Press or
to move back through the number.
4. To...Then press the...
Call the number key.
Store the numberSave soft key and enter
the name and location
required (for further
details, refer to page 39).
The number corresponding to the most recent
missed call is displayed, if available.
2. To...Then press the...
Scroll through the
or
key.
missed calls
Call the number displayedkey.
Edit or delete a missedOptions soft key
call number(see the following
paragraphs).
Deleting a Missed Call
1. Press the Options soft key.
2. Press or to highlight the Delete option.
3. Press the Select soft key.
You can press at any time to exit the Missed
Call feature.
N o t e:
You can access the Missed Call feature at any
time by selecting the Missed Callsmenu option
(1 - 1); for further details, see page 57.
2524
Call Functions
In-Call Options
Your phone provides a number of control functions
that you can use during a call. To access these
functions during a call, press the Options soft key.
Call Functions
Searching for a Number in the Phonebook
You can search for a number in the phonebook during
a call.
Switching the Microphone Off (Mute)
You can temporarily switch your phone’s microphone
off, so that the other party cannot hear you.
Example: You wish to say something to another
person in the room but do not want the
other party to hear you.
To switch the microphone off temporarily,
proceed as follows.
1. Press the Options soft key.
2. P ress or to highlight the M u t e o p t i o n .
3. Press the Ok soft key.
Your correspondent can no longer hear you.
To switch the microphone back on, proceed as
follows.
1. Press the Options soft key.
2. Press or to highlight the Unmute
option.
3. Press the Ok soft key.
1. Press the Options soft key.
2. Press or to highlight the Phonebook
option.
3. Press the Ok soft key.
4. Enter the start of the name that you want to find
and press the Find soft key.
N o t e : You can also scroll through the phonebook
f rom the beginning, by pressing the F i n d
soft key dire c t l y.
The phonebook entries are listed, starting with
the first entry matching your input. This entry is
also highlighted.
5. To review the highlighted entry, press the View
soft key.
For a more detailed description of the Phonebook
feature, refer to page 39.
Your correspondent can hear you again.
26
27
Call Functions
Call Functions
Putting a Call on Hold
You can place the current call on hold whenever you
want. You can make another call while you have a
call in progress if this service is supported by the
network. Of these two calls, one is active and the
other is on hold and you can swap between the calls.
To place a call on hold, press the Option soft key,
and select the Hold option. You can reactivate the
call whenever you want, by pressing the Retrieve
soft key.
To make a call while you have a call in
progress, proceed as follows.
1. Key in the phone number that you wish to dial or
look it up in the phonebook.
2. Press to dial the second call.
The first call is automatically put on hold.
Or alternatively, proceed as follows.
1. Put the current call on hold by pressing the
Options soft key, followed by the Hold option.
2. Make the second call in the normal way.
Answering a Second Call
You can answer an incoming call while you have a
call in progress, if this service is supported by the
network and if you have set the Call Waiting menu
option (5-2-3) to Active (see page 89). You will be
notified of an incoming call by a call waiting tone.
To answer a call while you have a call in progress,
proceed as follows.
1. Press to answer the incoming call.
The first call is automatically put on hold.
2. If you want to switch between the two calls,
press the Swap soft key.
If you want to end a held call, press the Options
soft key and select the End held option.
3. To end the current call, press .
Any held calls will automatically be reconnected
to you.
To swap between the two calls, simply press the
Swap soft key.
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with the other party.
When you have finished, end each call normally by
pressing .
28
29
Call Functions
Call Functions
Making a Multiparty Call
A multiparty call is a network service that allows
up to six people to take part simultaneously in a
multiparty or conference call. For more information,
contact your service provider.
Setting up the Multiparty Call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way. The
first call is automatically put on hold.
3. To join the first participant to the multiparty call,
press the Options soft key and select the Join
option.
4. To add a new person to the multiparty call, call
the person in the normal way, then press the
Options soft key and select the Join option.
You can add incoming callers by answering the call
and pressing Options, followed by Join. Repeat as
required.
2. Highlight the required person, by pressing or
, followed by .
3. Select Private.
Now you can talk privately with that person. The
other participants can continue to converse with
each other.
4. To return to the multiparty call, press the Options
soft key and select Join.
All the multiparty call participants can now hear
each other.
Dropping One Participant
1. Press the Options soft key and choose the
Select one option. The list of call participants
appears.
2. Highlight the required person, by pressing or
, followed by .
3. Select Remove.
The call is ended with that participant, but you
can continue to talk with the other participants.
Having a Private Conversation With One
Participant
1. Press the Options soft key and choose the
Select one option. The list of call participants
appears.
30
4. End the multiparty call by closing the flip cover or
pressing
.
31
Call Functions
Muting/Sending Key Tones
Entering Text
These options allow you to turn the key tones off or
on. If the Mute keys option is selected, your phone
does not transmit the key tones.
Note: To communicate with answering machines or
computerised telephony systems, the S e n dk e y s option must be selected.
Using the SMS Service
If you receive an SMS (Short Message Service)
message during a call, the message icon ()
flashes in the display.
After you have finished your call, you can read the
message; refer to page 61 for further details.
When storing a name in the Phone Book, creating
your personal greeting or scheduling events in your
calendar you will need to enter text into your phone.
You are provided with the following text input
modes;
• ABC: This mode allows you to enter letters by
pressing the key labelled with the desired
letter once, twice, or three times until the
letter appears on the display.
• Number: This mode allows you to enter numbers.
• T9: This mode allows you to enter English words
with only one key press per letter. Each key on
a keypad has more than one letter - a single
press on could be J,K or L. The
T9(English) mode automatically compares your
key presses to an internal linguistic database
to determine the correct word. The T9(English)
mode requires far fewer keystrokes than the
traditional multi-tap method, ABC mode.
• Symbolic: This mode allows you to enter special
characters.
is a registered Trademark of Tegic Communications, Inc.
32
33
Entering Text
Changing Text Input Mode
1. When you are in a field that allows characters
entry, you should notice the text input mode
indicator in the lower right corner of the display.
Save ENG
2. Press the right soft key. The modes available are
displayed.
Text input mode
indicator
Entering Text
• To insert a space, press .
• If you make a mistake, you can remove characters
to the left of the cursor by pressing as many
times as necessary. Pressing and holding
clears the screen.
• The cursor moves to the right when you press a
different key. When entering the same letter twice
(or a different letter on the same key) just wait for
a few seconds for the cursor to move right
automatically, and then select the next letter.
3. Scroll to the desired mode, then press the Select
soft key.
ABC Mode
Use the keys labelled with letters ( ~ ) to
write with. Press once for the first labelled letter,
twice for the second and three times for the third
etc. Pressing brings up a list of special
characters. See the table on page 35 for more
information on the characters available using the
keys.
• There are three shift states: Lower Case (no shift
indicator), Initial Cap ( indicator appears), and
Caps Lock ( indicator appears). Press one
or more times to display the appropriate shift
indicator on the bottom of the display, and begin
typing normally.
34
List of characters available:
Key Characters in the order displayed
Lower Case
. , ? ! 1 - ‘ @ :
1
a b c 2 à ä æ å Ç
2
d e f 3 é è
3
g h i 4 ì
4
j k l 5
5
m n o 6 ñ ò ö ø
6
p q r s 7 ß
7
t u v 8 ù ü
8
w x y z 9
9
0 + ( ) & _ $
0
Upper Case
: ; ¿ ¡ 1 = “ /
A B C 2 Ä Æ Å Γ
D E F 3 É ∆
G H I 4 Θ
J K L 5 Λ
M N O 6 Ñ Ö Ø Ξ
P Q R S 7 Π Σ
T U V 8 Ü Φ
W X Y Z 9 ΨΩ
0*< > % # £
35
Call Functions
Entering Text
Entering Text
Number Mode
The Number Mode enables you to enter numbers
into a text message. Press keys corresponding to the
desired digits, and manually switch back to the text
entry mode of choice.
T9 Mode
T9 predictive text input allows you to enter words
easily with a minimum of key presses. As you press
each key the phone selects a letter that makes up a
word that it thinks you are trying to type, based on a
built-in dictionary. As a new letter is added the word
changes based on the key you have pressed.
1. When you are in the T9 predictive text input, start
writing a word by using keys to . Press
each key only once for one letter.
For example, to enter ‘hello’ in the T9 English
mode, press , , , and .
2. The word you are typing appears in the display. It
may change with each key you press.
3. Type to the end of the word before editing or
deleting any keystrokes.
4. Complete each word with a space by pressing .
5. If the word is correct, start writing the next word.
If the word is not correct, press one or more
times to display alternate word choices for the keys
you have typed. (For example, ‘of’ and ‘me’ both
shares the sequence , . The phone displays
the most commonly used choice first.)
• To type words not found in the T9 mode, change
the text input mode to the ABC mode.
• To delete a character, press . Press and hold
to erase entire words.
• There are three shift states: Lower Case (no shift
indicator), Initial Cap ( indicator appears), and
Caps Lock ( indicator appears). Press one
or more times to display the appropriate shift
indicator, and begin typing normally.
Meet me at
Save ENG
Shift indicator
N o t e: If you want to exit the text input mode without
saving your input, press . The phone goes
back to the previous menu level.
3736
Call Functions
Entering Text
Symbolic Mode
The Symbolic Mode enables you to enter various
symbols into a text message.
123 456 789
.(),:;%!
Save SYM
To scroll through the symbols available, press
or (or the volume keys on the left side of
the phone). Press number keys corresponding to the
desired mark, then the phone automatically switches
back to the text entry mode used just prior to
selecting the SymbolicMode.
Phonebook
You can store phone numbers and their associated
names in the memory of your SIM card. In addition,
you can store up to 200 numbers and names in the
phone memory. The SIM card and phone memories,
although physically separate, are used as if they
were a single entity, called the Phonebook.
Storing a Phone Number with a Name
As soon as you start to enter a number, Save
appears above the left soft key to allow you to store
the number in the phonebook.
1. Key in the number to be stored.
2. When you are sure that it is correct, press the
Save soft key.
N o t e s:
• If you make a mistake while entering a number,
c o rrect it using the soft key. For furt h e r
details, refer to page 20.
• To insert a dialling pause for special phone
s e rvices, such as banking by phone, hold down
. ‘P’ is displayed to indicate the pause.
3. Enter the associated name (the maximum length
depends on your SIM card). For information on
how to enter a name, see page 33.
4. When you are satisfied, press the Save soft key.
The phone now displays the first free location in
the SIM card for you to save the number and
name. If the card memory is full, the first free
location in the phone memory is displayed.
3938
P h o n e b o o k
P h o n e b o o k
5. Press the right soft key to toggle between the
phone (To Phone) and card (To Card) memories.
6. If you do not want to save the number and name
in the suggested location, press to clear the
location number and enter your preferred location
by pressing the number keys.
7. Press Ok to store the name and number.
8. You can access the phonebook options by
pressing the Options soft key, or scroll through
the memory with or .
To exit, press .
Phonebook Options
When storing or viewing a number in the phonebook,
Options appears above the left soft key to allow you
to access the phonebook options, described in the
following paragraphs.
Accessing the Options
To access the various phonebook options, proceed as
follows.
2. To...Then press the...
Select the Select soft key.
highlighted option
Highlight a
or key
one or
different optionmore times until the
required option is
highlighted.
Voice Record
Note: This option appears only when no name has
been re c o rd e d .
Allows you to add a voice tag to the number.
Follow the instructions given by your phone to record
the required name.
Play Voice
Note: This option appears only when you have
a l ready re c o rded some names.
Plays back the names that you have recorded.
1. Press the Options soft key.
The first available option is highlighted.
40
41
Loading...
+ 49 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.