Samsung SCO-5083R User Manual
High Resolution Weatherproof
IR Camera
User Manual
SCO-5083R
High Resolution Weatherproof IR Camera
User Manual
Copyright
©2014 Sam sung Techwin Co., Ltd . All rig hts res erved .
Trademark
The name of this produ ct is the registered tra demark of S amsung Techwin Co., Ltd.
Other tr ademarks menti oned in this ma nual are the registe red trademark of th eir respective co mpany.
Restriction
Samsung Tec hwin Co., Ltd s hall reser ve the copyright of this docume nt. Under no circum stances , this document
shall be reproduced, distributed or changed, partially or wholly, without formal authorization of Samsung Techwin.
Disclaimer
Samsung Tec hwin makes th e best to verify th e integrity and co rrectness of th e contents in this docum ent, but
no formal g uarantee s hall be provi ded. Use of this doc ument and the subseq uent results shall b e entirely on
the user’s own respons ibility. Samsung Techwin reser ves the righ t to change the contents o f this document
without prior notice.
Warra nty
If the pro duct does not oper ate properly in nor mal conditions, p lease let us know. Sa msung Techwin will resolve
the probl em for free of charge. T he warranty per iod is 3 years. Howe ver, the followings are exclu ded:
•If t he system behaves ab normally becaus e you run a program irr elevant to th e system operation.
•Det eriorated per formance o r natural worn-o ut in process of time.
Design and s pecification s are subjec t to change withou t prior notice.
is the registered log o of Samsung Tech win Co., Ltd.
Before operating the camera, confirm the camera model and correct input power voltage. To
help you understand this manual thoroughly, we'll introduce our model description.
■ SCO-5083R SERIES
• NTSC MODEL • PAL MODEL
SCO-5083RN SCO-5083RP
■ MODEL DESCRIPTION
• SCO-5083RX
_
SIGNAL SYSTEM
•SIGNAL SYSTEM
N → NTSC MODEL
P → PAL MODEL
safety information
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates that dangerous voltage consisting a risk of electric
shock is present within this unit.
This exclamation point symbol is intended to alert the user to the presence
of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING
• To prevent damage which may result in fire or electric shock hazard, do not expose this
appliance to rain or moisture.
• To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with
the installation instructions.
WARNING
1. Be sure to use only the standard adapter that is specified in the specification sheet.
Using any other adapter could cause fire, electrical shock, or damage to the product.
2. Incorrectly connecting the power supply or replacing battery may cause explosion, fire,
electric shock, or damage to the product.
3. Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause
abnormal heat generation or fire.
4. Securely plug the power cord into the power receptacle. Insecure connection may cause
fire.
5. When installing the camera, fasten it securely and firmly. The fall of camera may cause
personal injury.
4_ safety information
6. Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers
filled with water on top of the camera. Doing so may cause personal injury due to fire, electric
shock, or falling objects.
7. Do not install the unit in humid, dusty, or sooty locations. Doing so may cause fire or electric
shock.
8. If any unusual smells or smoke come from the unit, stop using the product. In such case,
immediately disconnect the power source and contact the service center. Continued use in
such a condition may cause fire or electric shock.
9. If this product fails to operate normally, contact the nearest service center. Never
disassemble or modify this product in any way. (samsung is not liable for problems caused
by unauthorized modifications or attempted repair.)
10
.
When cleaning, do not spray water directly onto parts of the product. Doing so may
cause fire or electric shock.
● safety information
CAUTION
1. Do not drop objects on the product or apply strong shock to it. Keep away from a location
subject to excessive vibrationor magnetic interference.
2. Do not install in a location subject to high temperature (over 55°C), low temperature (below
-30°C), or high humidity. Doing so may cause fire or electric shock.
3. If you want to relocate the already installed product, be sure to turn off the power and then
move or reinstall it.
4. Remove the power plug from the outlet when then there is a lightning. Neglecting to do so
may cause fire or damage to the product.
5. Keep out of direct sunlight and heat radiation sources. It may cause fire.
6. Install it in a place with good ventilation.
7. Avoid aiming the camera directly towards extremely bright objects such as sun, as this may
damage the CMOS image sensor.
8. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
9. The Mains plug is used as a disconnect device and shall stay readily operable at any time.
10. Do not expose the camera to radioactivity. Radioactivity exposure may damage the
CMOS.
English_5
safety information
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions :
1) This device may not cause harmful interference, and
2) This device must accept any interference received including interference that may cause
undesired operation.
CAUTION
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at
his own expense.
IC Compliance Notice
This Class A digital apparatus meets all requirements of the Canadian
Interference.-Causing Equipment Regulations of ICES-003.
Correct Disposal of This Product
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories
(e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their
working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal,
please separate these items from other types of waste and recycle them responsibly to promote the sustainable
reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government
office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be
disposed of with other household waste at the end of their working life. Where marked, the chemical symbols
Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC
Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health
or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste
and recycle them through your local, free battery return system.
6_ safety information
(Waste Electrical & Electronic Equipment)
important safety instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong is provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus.
13
. Unplug this apparatus when a card is used. Use caution when
moving the cart/ apparatus combination to avoid injury from tipover.
14
. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as powersupply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
15
. This product is intended to be supplied by a Listed Power Supply Unit marked
"Class 2" and rated from 24 Vac (50/60Hz) min 0.8A or 12 Vac min 0.8A.
● safety information
Apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus.
Samsung Techwin cares for the environment at all product manufacturing
stages to preserve the environment, and is taking a number of steps to provide
customers with more environment-friendly products.The Eco mark represents
Samsung Techwin’s will to create environment-friendly products, and indicates
that the product satisfies the EU RoHS Directive.
English_7
contents
INTRODUCTION
CONNECTION
CAMERA OPERATION
TROUBLESHOOTING
SPECIFICATIONS
9
14
17
33
34
9
Features
10
Components and Accessories
11
Components names and Functions
13
Adjust the lens's zoom and focus
14
Connecting to Monitor
14
Connecting to Power
15
Using Communications
17
Menu Configuration
17
Menu Setup
33
Troubleshooting
34
Specifications
36
Dimension
8_ contents
introduction
FEATURES
yHigh Resolution
Use of a 1.3mega pixel CMOS device provides clear pictures with a horizontal resolution
of 1000TVL.
y Excellent Sensitivity
The built-in high sensitivity COLOR CMOS produces a clear image.
-
Color : 0.05Lux (F1.4, 50IRE), 0.001Lux (1sec, F1.4, 50IRE)
0.02Lux (F1.4, 30IRE), 0.0006Lux (1sec, F1.4, 30IRE)
B/W : 0Lux (IR LED On)
y Intelligence
Without an external sensor, you can use this product to detect motion and generate
alarms and thus more efficient monitoring can be achieved.
y SSNR4 (Samsung Super Noise Reduction) Function
The high-performance W7 effectively removes low-light gain noise and afterimage to
provide clear images even in dark environments.
y Day&Night
This camera has a function that automatically selects the mode that is appropriate
for daytime or night-time conditions. The COLOR mode operates in daytime condi
tions to provide optimum colors, and B/W mode operates in night-time conditions to
enhance the definition of the image.
y SSDR (Samsung Super Dynamic Range)
For images with high contrast between bright and dark areas from difficult lighting conditions
such as backlighting, this camera selectively illuminates darker areas while retaining the same
light level for brighter areas to even out the overall brightness.
y PROFILE
You can set a mode according to the camera installation conditions.
- BASIC, DAY/NIGHT, BACKLIGHT, ITS, INDOOR, USER
y WDR
By adopting a proprietary W7 chip, the camera delivers clear, high quality pictures
even in backlight, by increasing exposure in dark areas while decreasing it in bright
areas; a corrected image with clear details results.
y DIS (Digital Image Stabilizer)
The DIS function compensates for any camera movement, to produce more stable
pictures.
● introduction
-
English_9
introduction
y Miscellaneous Functions
HLC(High Light Compensation), REVERSE , D-ZOOM, SHARPNESS and PRIVACY
functions are provided.
y Communication
RS-485
, Coaxial communication methods are supported.
- Coaxial Communications : Pelco Coaxitron
RS-485: Samsung-T, Samsung-E, Pelco-D, Pelco-P, Panasonic, Bosch,Honeywell,
Vicon, AD, GE
y OSD
The camera’s OSD is complimented by 17 languages.
- English, Chinese, Korean, Japanese, German, Italian, French, Spanish, Russian,
Czech, Polish, Romanian, Serbian, Swedish, Danish, Turkish, Portuguese
COMPONENTS AND ACCESSORIES
Check if the following items are included in the product package.
)JHI3FTPMVUJPO8FBUIFSQSPPG
*3$BNFSB
4XLFN0DQXDO
SCO-5083R
SCO-5083R Quick Manual Screws
Mounting Template
Cable Line
Sunshield Template Wrench
Knob Sunshield
Video Output Cable
10_ introduction
COMPONENT NAMES AND FUNCTIONS
Front
● INTRODUCTION
➊
➋
➎
➊
Camera Sunshield
2
Knob Sunshield : Fixing the sunshield onto the camera.
➌
Focus lever : Set focus of lens by turn the focus lever.
➍
Zoom lever : Set zoom magnification of lens by turn the zoom lever.
➎
Front cover
➏
Function Setup Switch : Display the menu on the screen and move the cursor to four
directions to confirm status or after changing a selected item.
➐
Video Output Terminal to Monitor : Used for monitoring of video output When camera
installation.
` When you adjust to the ZOOM & FOCUS of the lens, Please remove the front cover from the
camera, by turning the cover counterclockwise.
M
` To adjust the zoom & focus loosen the individual levers before tightening them again.
` To ensure the weatherproof integrity is maintained, Before installation the front cover, it's necessary
to push tight first. and then turn it clockwise to locking indication.
➌
▲
➍
➏
➐
▲
English_11
Introduction
Back
➒
of the power connection.
Rated Voltage and Polarity
Be ware of the
CAUTION:
➑
❿
❽
Function jack
REEN(485 –) : Signal port for RS-485- communication.
G
YELLOW(485+) : Signal port for RS-485+ communication.
BLUE (ALARM OUT) : Output port that signals when a motion is detected.
GRAY(EXT_D/N) : External signal input port for Day/Night mode setup.
BLACK(GND) : Earth-grounding port for external signal.
❾
Video output jack : Video signals are output through this port. Connect this port to the Video
IN port of a monitor.
❿
Power input terminal : Connect the power as specified for each model here.
12_
introduction
Loading...