All Intellectual Property, as defined below, owned by or which is otherwise the
property of Samsung or its respective suppliers relating to the SAMSUNG Phone,
including but not limited to, accessories, parts, or software relating there to (the
“Phone System”), is proprietary to Samsung and protected under federal laws, state
laws, and international treaty provisions. Intellectual Property includes, but is not
limited to, inventions (patentable or unpatentable), patents, trade secrets,
copyrights, software, computer programs, and related documentation and other
works of authorship. You may not infringe or otherwise violate the rights secured by
the Intellectual Property. Moreover, you agree that you will not (and will not attempt
to) modify, prepare derivative works of, reverse engineer, decompile, disassemble,
or otherwise attempt to create source code from the software. No title to or
ownership in the Intellectual Property is transferred to you. All applicable rights of
the Intellectual Property shall remain with SAMSUNG and its suppliers.
Samsung Telecommunications America (STA), LLC
Headquarters:Customer Care Center:
1301 E. Lookout Drive1000 Klein Street
Richardson, TX 75082Plano, TX 75074
2007 Samsung Telecommunications America, Inc. is a registered trademark
of Samsung Electronics America, Inc. and its related entities.
Licensed by Qualcomm Incorporated under one or more of the following patents:
U.S. Patent No. 4, 901, 307; 5, 056, 109; 5, 099, 204; 5, 101, 501; 5, 103, 459; 5,
107, 225; 5, 109, 390.
GH68-12772A
RSA® is a registered Trademark RSA Security, Inc.
The Wafer
TM
is a Trademark Alltel Communications, Inc.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE
WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE
PRODUCT “AS IS”, AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF
ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT
LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE
PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE
PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE
PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY
OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION,
SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
Samsung Mobile Products and Recycling ..............................................................174
Care and Maintenance ..........................................................................................175
Warranty Information .............................................................................176
Standard Limited Warranty ...................................................................................177
Index .........................................................................................................181
6
Section 1: Getting Started
Topics Covered
• Understanding this User Manual
• Activating Your Phone
• Charging the Battery
• Setting Up Your Voice Mail
• Memory Card (Optional)
This section explains how to start using your phone by activating your service, setting
up your voice mail, or getting an understanding of how this manual is put together.
Getting Started7
Understanding this User Manual
The chapters of this guide generally follow the same order as the menus and submenus in your phone. A robust index for quick reference to most features begins on
page 181.
Also included is important safety information that you should know before using your
phone. Most of this information is near the back of the guide, beginning on page
158.
Notes and tips
Throughout this guide are icons and text that are set apart from the rest. These are
intended to point out important information, quick methods for activating features, to
define terms, and more. The definitions for these methods are as follows:
• Notes: Explain alternative options within the current feature, menu, or sub menu.
• Tips: Provide quick or innovative methods for performing functions related to the
subject at hand.
• Important: Points out important information about the current feature that could
affect performance, or even damage your phone.
Activating Your Phone
Contact your Wireless Carrier and follow their instructions for obtaining service, if
necessary. We suggest that you read this guide to fully understand the services your
phone supports.
Install the Battery
Note: Your phone comes packaged with a partially charged rechargeable standard Li-Ion battery and travel
adapter.
Important!: You must fully charge the battery the first time you use your phone, otherwise you could
damage the battery.
1. Insert the top end (1) of the battery first,
matching the gold contacts on the top end
of the battery to those inside of the ph one.
2. Press the bottom end of the battery (2)
1
down into the phone.
2
8
Activating Your Phone
3. Place the battery cover over the battery
and slide the cover upward into place (3).
3
Turn Your Phone On
1. Press and hold the key for two or more seconds.
Note: As with any other radio-transmitting device, do not touch the antenna while using your phone as this
can affect call quality and can cause the phone to operate at a higher power level than is necessary.
2. The phone begins searching for a network signal.
3. Once the phone finds a signal, the time, date and day appear at the top of
END
the display.
4. You’re now ready to place and receive calls.
Note: If you are outside of your carrier’s coverage or roaming area ( ), the No Service icon () appears
at the top of the phone’s display. If you cannot place or receive calls, try later when service is available, or at
another location.
Turn Your Phone Off
䊳 Press and hold the key for two or more seconds. Your phone powers
END
off.
D
N
Note: If your phone is on and you press for less than one second, the phone will not power off. This
prevents your phone from being turned off accidentally.
E
Remove the Battery
Important! You must unplug the Travel Adapter (if it is connected) before removing the battery from the
phone during charging to avoid damage.
1. Press and hold the key to turn off the phone (if on).
END
2. Slide the cover toward the bottom end of
the phone.
Getting Started9
3.
Lift the battery up and away from the
phone, bottom end first.
Charging the Battery
Your phone is powered by a rechargeable standard Li-Ion battery. Only use
Samsung-approved charging devices and batteries. Samsung accessories are
designed to maximize battery life. Using other accessories may invalidate your
warranty and may cause damage.
Use the Travel Adapter
The travel adapter included with your phone is a
convenient, light-weight charger that rapidly charges
your phone from any 120/220 VAC outlet.
1. Plug the large end of the Travel Adapter into
a standard 120 VAC or 220 VAC wall outlet.
Note: For connection to an electrical supply not located in North America, you must use an adaptor of the
proper configuration for the power outlet. Use of the wrong adapter could damage your phone and
void your warranty.
2. Insert the smaller end of the Travel Adapter into the charger/accessory
connector on the left side of your phone.
10
Setting Up Your Voice Mail
Note: With the device turned OFF, a discharged battery recharges fully in approximately 4 hours.
Low battery indicator
The battery indicator () in the upper-right corner of the display indicates power
level. Monitor the battery strength and ensure your battery is adequately charged.
• Three bars () indicate a full charge.
• An empty battery icon () indicates a near empty battery.
• A blinking empty battery icon () and a tone sounding indicate you have two to
three minutes before the battery is too low to operate the phone.
If you continue to use your phone without charging its battery, the phone shuts down.
Setting Up Y our Voice Mail
Voice mail allows callers to leave voice messages, which can be retrieved any time.
Note: Once your voice mail account has been set up, you can use the Voice Mail folder (under the Message
menu) to view details of voice messages in your voice mail box.
)
)
1. In standby mode, press and hold the key or dial your own mobile
@
number to dial voice mail.
2. Follow the prompts in the new user tutorial to setup your voice mail box.
Listen to voice mail
)
)
1. In standby mode, press and hold the key or dial your own mobile
@
number to dial voice mail. After connecting, you will hear your voice
greeting.
2. Interrupt your greeting by pressing .
3. You are then prompted to enter your password.
4. Enter your password and follow the prompts to listen to your voice mail.
Memory Card (Optional)
Your phone has a memory card slot beneath the battery cover. You can install a
microSDTM card to provide additional memory for storing files (such as, sound files
and photos) in your phone.
Getting Started 11
Install a Memory Card
1. Remove the battery cover and
battery. (See “Remove the
Battery” on page 9 for more
information.)
2. Insert the memory card — label
side facing you and smaller end
pointing toward the top of the
phone — into the memory card slot.
3. Press the memory card up into the slot until the card locks into place.
4. Install the battery and battery cover. (See “Install the Battery” on page 8 for
more information.)
Remove a Memory Card
1. Remove the battery cover and battery. (See “Remove the Battery” on page
9 for more information.)
2. Press the memory card up into the slot until the card lock releases.
3. Remove the memory card from
the memory card slot.
4. If desired, install another memory
card. (See “Install a Memory
Card” above for more
information.)
5. Install the battery and battery cover. (See 8 for more information.)
12
Features of Your Phone
Section 2: Understanding Your Phone
Topics Covered
• Features of Your Phone
• Front View of Your Phone
• Rear View of Your Phone
• Rear View of Your Phone (Memory Card Slot)
• Command Keys
• Understanding the Display Screen
• Your Phone’s Modes
This section outlines some key features of your phon e. It also displays the screen and
the icons that are displayed when the phone is in use.
Features of Your Phone
• Domestic and international voice and text messaging service (available on
participating networks).
• High speed data (CDMA 1x EVDO Technology)
• Global Positioning (GPS) Technology
• Personal Information Management (PIM) Functions
• Video Messaging
• MMS Messaging
• Text Messaging
• Email Messaging
• 1.3 Megapixel Camera with Camcorder function
• Advanced Speech Recognition
• Speakerphone
TM
• microSD
• Bluetooth
** The Wafer supports the wireless handsfree profile, serial port profile, and dial-up
networking profile for Bluetooth® wireless technology. The Wafer does not suppor t Bluetooth
OBEX profiles.
Memory Card slot
®
Wireless Technology **
Understanding Your Phone 13
Front View of Your Phone
1. Earpiece/Speaker
2. Display
3. OK key
4. Left soft key
5. Send key
6. Special
function keys
13. Navigation key
12. Right soft key
11. End (exit) /
Power key
10. Clear key
9. Alphanumeric
keypad
8. Microphone
7. Voice Recognition
key
Features
1. Earpiece/Speaker — Lets you hear the other caller.
2. Display — Indicates the status of your phone, including status icons,
message indicators, signal strength, and so on. Shows menus, calls, and
messages.
3. OK Key — Pressing when navigating through a menu accepts the
highlighted choice in a menu.
4. Left Soft Key — Used to navigate through menus and applications and to
select the choice available in the Left Soft key option.
5. Send Key — Lets you place or receive a call. In standby mode, press the
key once to access the recent call log.
6. Special Function Keys — Enter special characters. Perform various
8. Microphone — Lets the other caller hear you clearly when you are
speaking to them.
9. Alphanumeric Keypad — Use these keys to enter numbers, letters, and
characters.
10. Clear Key — Deletes characters from the display when you are in text
entry mode. Press this key to return to the previous menu or screen when
navigating features on your phone.
11. End Key — Ends a call. If you press and hold the END key, the power goes
On or Off. When you receive an incoming call, press to send the call to
voicemail.
12. Right Soft Key — Used to navigate through menus and applications and
to select the choice available in the Right Soft key option.
13. Navigation Key — Lets you scroll through the phone menu options.
Rear View of Your Phone
15. Camera
lens
14.Camera
key
16. Volume
key
17. Power Accessory
Connecto
Understanding Your Phone 15
Features
14. Camera Key — In standby mode, launches the camera.
In camera mode, switches between camera and camcorder functions.
15. Camera Lens — The lens of your built-in camera.
16. Volume Key — During a call, adjusts the earpiece volume.
In standby mode, adjusts the ring volume.
When receiving a call, mutes the ringer.
17. Power/Accessory Connector — Used to plug in the charging accessories
and also connect any available accessory cables to your phone. Lets you
plug in an optional headset for safe, convenient, hands-free conversations.
Rear View of Your Phone (Memory Card Slot)
18. Memory
Card slot
Feature
18. Memory Card Slot — Used to plug in a microSD memory card for
additional multimedia file storage.
16
Command Keys
Command Keys
Functions for the soft keys are defined by what appears above each in the display.
There are two soft keys, the left soft key (
) and the right soft key ().
Left Soft Key
Some functions of the left soft key are as follows.
• In standby mode, press the Celltop (left) soft key () to launch the Celltop
application. (For more information, see the Celltop user guide.
• When the left soft key function is Edit, press the Edit (left) soft key () to edit
a Contact.
• When the right soft key function is Erase, press the Erase (left) soft key ()
and a pop-up window appears prompting you to confirm the erasure.
Right Soft Key
Some functions of the right soft key are as follows.
• In standby mode, press the Message (right) soft key () to open the
Messages menu.
• When the right soft key function is Back, press the Back (right) soft key () to
back up one menu level.
• When the right soft key function is Options, press the Options (right) soft key
() and a pop-up menu appears.
OK Key
• In standby mode, press the MENU key () to open the main menu.
• In a menu, press the OK key () to accept the highlighted selection.
• In camera mode, press the OK key () to take a photo or to create a Pic
OK
OK
OK
message.
• When the OK key function is Edit, press the Edit (OK) key () to edit a Draft
OK
message.
Clear Key
The CLR key () is used to erase or clear numbers, text, or symbols from the
display. You can also use the key to return to a previous menu or to return to
standby mode from any menu.
1. If you enter an incorrect character, briefly press to backspace (and
delete) the character.
2. To erase the entire sentence, press and hold .
3. To back up one menu level, briefly press .
Understanding Your Phone 17
4.
To return to standby mode, press and hold until you return to
standby mode.
End Key
1. In standby mode, press and hold the End key () to turn your phone
END
off.
2. Briefly press once to disconnect a call.
3. Press to return to standby mode from any menu, or to cancel the last
END
END
input.
4. With your phone turned off, press to turn your phone on.
END
Send Key
The Send key () is used to answer calls, dial calls, and to recall the last
SEND
number(s) dialed, received, or missed.
1. Press once to answer calls.
2. Enter a number and briefly press to make a call.
3. Briefly press in standby mode to display a list of recent calls to and
SEND
SEND
SEND
from your phone.
4. Press twice in standby mode to call the most recent number.
5. Press to pick up a waiting call. Press again to switch back to the
SEND
SEND
SEND
other call.
Navigation Key
Use the directional keys on the navigation key () to browse menus, sub-
OK
menus, and lists. Each key also acts as a shortcut to launch applications.
Camera Key
In standby mode, momentarily press the Camera key ( ) — located on the right
side of your phone — to activate the camera built into your phone.
With the camera or camcorder active, pressing and holding the Camera key ( )
switches between the camera and camcorder functions.
18
Understanding the Display Screen
Understanding the Display Screen
1. The top line of your phone’s main
1
display contains icons that indicate
network status, battery power,
signal strength, connection type,
and more.
2
2. The center portion of the main
display shows information such as
call progress information,
3
messages, and photos.
3. The bottom line of the main display shows current soft key functions. The
sample screen shows that pressing the Left soft key () will launch
the Celltop application, pressing the MENU key () will display the Main
OK
Menu, and pressing the Right soft key () will show the Messages
menu.
Display Screen Icons
Your Wafer phone can show you definitions of the icons that appear on the top lines
of the front and main displays. To access the Icon Glossary:
䊳 In standby mode, press the MENU key (), then press (for Set-
OK
tings), (for Phone Info), and for Icon Glossary. A list shows of
the icons that can appear on the top line of the display.
Dialogue Boxes
Dialogue boxes prompt for action, inform you of status, or warn of situations such as
low memory. Dialogue boxes and their definitions are outlined below.
• Choice
• Example: “Save message?”
• Reconfirm
• Example: “Erase all messages?”
• Performing
• Example: “SENDING...” “Connecting...”
• Completed
• Example: “Message saved in drafts”
• Information
• Example: “New Message”
Understanding Your Phone 19
•
Error
• Example: “Card not available, Insert card”
• Warning
• Example: “Battery Low,” “Memory Full!”
Backlights
Backlights illuminate the display and the keypad. When you press any key or open
the phone, the backlights come on. They go off when no keys are pressed within a
period of time set in the Backlight menu.
Note: During a phone call, the display backlight dims and turns off after ten seconds to conserve battery
power, regardless of the Backlight setting.
See “Backlight” on page 139 for more information.
Your Phone’s Modes
Call Answer Mode
You can select how you wish to answer a call.
1. In standby mode, press the MENU key (), then press (for
Settings), (for Call Settings), and s for Call Answer. The
OK
)
)
@
following call answer options appear in the display:
•Any Key — Pressing any key except the key or key answers a call.
•Send Key — Only pressing answers a call.
Tip: Tip: You can set your phone to answer calls automatically, without any input from you. (See “Auto
Answer” on page 141 for more information.)
SEND
END
2. Use the navigation keys to highlight an option.
3. Press the key to select the method for answering calls.
OK
Input mode
Input mode determines how you enter text, numbers and symbols. While at any text
entry screen, press the Left soft key (), then choose the input mode from the
pop-up menu using the navigation keys. Optional input modes are T9 Word, Abc,
ABC, 123, and Symbols. (See “Entering Text” on page 47 for more information.)
Tip: You can also cycle between T9 Word, Abc, and 123 by repeatedly pressing and holding the key.
20
Your Phone’s Modes
Lock Modes
Phone Lock
When the phone is in Phone Lock mode, restrictions are placed on phone use. You
can receive calls and messages, but cannot place outgoing calls (except for
emergency numbers) until you unlock the phone. Phone Lock mode also restricts
access to menus and the volume key. Unlock your phone by entering the lock code
when prompted. (See “Lock Phone” on page 144 for more information.)
Keypad Lock
When the phone is in Keypad Lock mode, the keypad and side keys are locked. This
prevents accidental operation of phone functions and features, such as dialing and
the camera. (See “Auto key lock” on page 151 for more information.)
• While in standby mode, press and hold the key to place the phone in Keypad
Lock Mode. “Keypad is locked” appears in the display.
• While in standby mode, press the Unlock (left) soft key (), then press the
key to unlock the keypad and side keys. “Keypad is unlocked” appears in the
display.
Standby Mode
Standby mode is the state of the phone once it has found service and is idle. The
phone goes into standby mode:
• After you power the phone on.
• When you press after a call or from within a menu.
END
In standby mode, you will see the time, day, and date as well as all phone status
icons.
1. While in standby mode, enter a phone number, and press to place a
SEND
call.
2. Press to return to standby mode.
END
Receive Messages in Standby Mode
You can receive messages in standby mode. An alert tone sounds and a notification
message appears in the display when a new message arrives. The following options
also appear in the display:
• View Now
• View Later
Use the navigation keys to highlight the desired option and press the key.
OK
Understanding Your Phone 21
Speakerphone Mode
While in Talk mode, press Options (right) soft key (), use the Up and Down
navigation keys to highlight Speakerphone, then press the key to switch from
OK
using the earpiece to the speakerp hone (speakerphone option) and back to using the
earpiece. Use the volume keys — located on th e left si de of y our pho ne — t o adjust
the volume. Your phone automatically drops out of Speakerphone mode when you
end the call.
Talk Mode
You can place and receive calls only when your phone is on. While in a call your
phone is in Talk mode. Press the Options (right) soft key () to display a list of
menu options. See “The In-Use Options” on page 38 for more information.
Vibrate Mode
Silence all tones your phone makes and replace them with vibrations.
䊳 In standby mode, repeatedly press and the Down volume key ( ) until
Vibrate appears in the display.
The volume key is on the upper left side of phone, near the upper left soft
corner of the display.
Adjust the Ringer
In standby mode, press the volume key ( ) on the left side of the phone
1.
up or down. Options are:
• Ringer Off • Medium
• Vibrate • Medium/High
• Low • High
• Low/Medium • Vibrate/High
2. When you are satisfied with the setting, press the SET () key. Your
OK
phone returns to standby mode.
Tip: You can also enter the Volume sub-menu by pressing the MENU key ( ), then pressing the ,
)
)
)
)
@
, , and keys. Use the navigation keys or the volume key on the upper left side of your
phone to adjust the ringer volume settings.
@
OK
Note: The Vibrate icon ( ) appears in the display when the phone is in Vibrate mode. The Vibrate plus
Ring icon () appears in the display when the phone is in or Vibrate/High mode.
22
Section 3: Call Functions
Topics Covered
• Making a Call — Number Entry Dialing
• Making a Call — Speed Dialing
• Making a Call — Voice Dialing
• Answering a Call
• Ignoring a Call
• Adjusting the Call Volume
• Calls Log
• Roaming
This section explains how to make or answer a call. This section also includes the
features and functionality associated with making or answering a call.
Call Functions 23
Making a Call — Number Entry Dialing
1. With the phone on, enter the number you wish to call using the keypad.
2. Press the key to place the call.
SEND
Dialing Emergency Numbers
To place an emergency call:
1. With the phone on, enter 911 using the keypad.
2. Press the key to place the call.
SEND
You can specify other numbers as emergency numbers using the Emergency #
settings. (See ‘Emergency #” on page 145 for more information.)
Important!: Emergency number 911 is hard-coded into your phone. You can dial this number almost any
time, even when the phone is locked or restricted.
If you call 911 an audible tone is heard and an Emergency prompt appears in the display for
the duration of the call.
Important!: Because of various transmission methods, network parameters, and user settings necessary
to complete a call from your wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all wireless networks at all times.
Important!: DO NOT depend on this phone as a primary method of calling 911 or for any other essential or
emergency communications.
Dialing International Numbers
Call another country from the U.S.
1.
In standby mode, enter the three-digit exit code (011) for the United States.
2. Enter the country code for the country that you are calling.
3. Enter the number that you wish to call, then press the key.
Note: Puerto Rico and Canada are on the North American dialing plan. When making calls to Puerto Rico
and Canada it is similar to making calls within the United States, no unique country codes are
necessary.
SEND
Placing calls when outside the U.S. — Mexico
•
Calling locally within Mexico: Dial the seven or eight-digit number.
• Calling long distance within Mexico: Dial 01, plus the ten-digit number (includes
area code).
24
Making a Call — Speed Dialing
• Calling to the U.S. or Canada from Mexico: Dial 001, plus the ten-digit number
(includes area code).
• Calling Voicemail from Mexico: Dial 001, plus your ten-digit wireless number.
Once you hear the recorded prompt, press and enter your passcode.
Manual Pause Calling
When you call automated systems (like banking services), you are often required to
enter a password or account number. Instead of manually entering the numbers
each time, you can store the n umbers in your Co ntact s al ong wi th sp ecial c hara cters
called pauses.
• P pause — A hard pause stops the calling sequence until you press the key.
SEND
• T pause — A two-second pause stops the calling sequence for two seconds and
then automatically sends the remaining digits.
To manually call a number with pause(s) without storing it to your Contacts:
1. Enter the number you wish to call.
2. Press the Options (right) soft key (). A pop-up menu containing the
following options appears in the display:
•P pause — a hard pause (awaits input from you).
•T pause — a two-second pause.
3. Use the navigation keys to highlight the desired pause option.
4. Press to enter the highlighted pause into your number sequence.
5. Press to call the number.
OK
SEND
Making a Call — Speed Dialing
You can store phone numbers and contact names in your phone’s Contacts list.
Speed Dialing lets you quickly and easily dial any contact in your Contacts list by
using that contact’s location number in the list. You can assign and change location
(speed dial) numbers for your contacts. (See ‘Assigning Speed Dial Numbers” on
page 61 for more information.)
One-Touch Dialing
Memory locations 002 through 009 are special One-Touch dialing locations. You can
call the phone numbers stored in your phone’s Contacts list from 002 through 009 by
pressing and holding a single key.
Example: For location number 003, press and hold the key until the name and number appear in the
display and the number is dialed.
Call Functions 25
Two-Touch Dialin g
Memory locations 010 through 099 are special Two-Touch dialing locations.
)
)
Example: For location number 013, briefly press the key, then press and hold the key until the
name and number appear in the display and the number is dialed.
@
Three-Touch Dialing
Memory locations 100 through 999 are special Three-Touch dialing locations.
)
)
Example: For location number 113, briefly press the key, briefly press the key again, then press
and hold the key until the name and number appear in the display and the number is
dialed.
@
)
)
@
Pause Dialing From a Conta cts En try
• If you speed dial a contact that contains (two-second) T pause(s) simply wait for
the pauses to pass and the dialing to complete.
• If you speed dial a contact that contains (hard) P pause(s), wait for the appropriate
prompt(s) from the number you are calling (credit card number, bank account
number, and so on) and enter the appropriate response(s).
Making a Call — Voice Dialing
Your Wafer mobile phone includes state-of-the-art voice recognition software that
lets you dial numbers using your voice.
Using Voice Dial
Use the Voice Dial command to dial any number stored in your Contacts list by
saying the name of the contact (Name Dialing). You can also use Voice Dial to dial
any valid telephone number, even numbers not stored in your contact list, by
speaking the individual digits in the number (Digit Dialing).
Voice Dialing Tips:
•
Wait for the beep before speaking.
• Speak clearly at a normal volume, as if you were talking to someone on the phone.
• When saying a name, say the first name then the last name.
Dialing a Name
To dial a name, do the following:
1. In standby mode, press and hold the key.
“Say a Command” appears in the display and is pronounced through the
earpiece.
26
Making a Call — Voice Dialing
2. Say, “Call”.
You are prompted to “Say the name or #”.
3. Speak clearly and say the name of a person in your Contacts list, first name
followed by last name.
If the name is recognized, Voice Dial repeats the name and dials the
number.
If Voice Dial is not sure which name you said, it displays a choice list of up
to three names and prompts you with “Did you say?” followed by the first
name on the list.
4. Say “Yes” to confirm the name or “No” to hear the next name, or use the
keypad to select the correct name from the list. (See ‘Choice Lists” on
page 121, for more information.)
• Press the Repeat (right) soft key () to say the name again.
• Press the Settings (left) soft key (), then press the Exit (right) soft key
() to exit Voice Dial without dialing.
If the recognized name has multiple numbers stored for it (that is, Home,
Work, Mobile, and so on), Voice Dial displays the possible choices and
prompts you with “Which number?”
5. Say one of the following number types:
• “Home”
• “Work”
• “Mobile”
Voice Dial dials the specified number.
Dialing a Number
To dial a number using Voice Dial, do the following:
1. In standby mode, press and hold the key.
“Say a Command” appears in the display and is pronounced through the
speaker.
2. Say “Call”.
VoiceSignal prompts you to “Say the name or #”.
3. Speak clearly and say the telephone number of the person you want to call.
For example, say “7 8 1 9 7 0 5 2 0 0."
Call Functions 27
If it recognizes the number, Voice Dial repeats and dials the number. If
Voice Dial is not sure it has recognized the number , it displays a choice list
of up to three numbers and prompts you with “Did you say?” followed by
the first number on the list.
4. Say “Yes” to confirm the number or “No” to hear the next one, or use the
keypad to select the correct number from the list. (See "Choice Lists" on
, for more information.)
page 121
• Press the Repeat (right) soft key () to say the name again.
• Press the Settings (left) soft key (), then press the Exit (right) soft key
() to exit Voice Dial without dialing.
Pause Dialing From a Conta cts En try
• If you voice dial a contact that contains (two-second) T pause(s) simply wait for the
pauses to pass and the dialing to complete.
• If you voice dial a contact that contains (hard) P pause(s), wait for the appropriate
prompt(s) from the number you are calling (credit card number, bank account
number, and so on) and enter the appropriate response(s).
Answering a Call
Your phone notifies you of a call in the following ways:
• A ring tone sounds and/or your phone vibrates (Your phone provides eight ring
, or Vibrate/High, and/or different ring types to distinguish
callers.)
• A phone number (unless blocked by the caller) and a name appear in the displa y (If
the caller’s number and name are stored in your Contacts list).
• If the caller can’t be identified, Call from unavailable#, Call from restricted
number, or no number appears in the display.
• Your phone continues to notify you of the call until one of the following events
occurs:
• You answer the call.
• You ignore the call.
• The calling party ends the call.
• The call is sent to voicemail.
Answering an Incoming Call
䊳 Press the key. The ring tone and/or vibration stop and the caller’s
SEND
voice can be heard in the earpiece.
28
Ignoring a Call
Tip: Y ou can set your phone to answer calls when you press any key but the key or automatically. (See
‘Call Settings” on page 141 for more information.
ND
E
Ignoring a Call
When you ignore an incoming call, the call is immediately forwarded to your voice
mail.
䊳 During an incoming call, press the Ignore (right) soft key (). The
caller is forwarded to your voice mail.
Adjusting the Call Volume
In standby mode, repeatedly press the volume key ( ) down until the Call Volume
Level desired appears in the display. The volume key is on the left side of phone.
Calls Log
The Calls log retains information about Outgoing, Incoming, and Missed calls. You
can also view times for your last call and the time totals for all calls.
Review the Calls Log
1. In standby mode, press the MENU key (). The Main Menu appears in
OK
the display.
2. Press the key (for Calls).
3. Press the number key associated with the Calls log that you wish to review
or the function you wish to access:
• Press for Outgoing Calls.
)
)
@
• Press for Incoming Calls.
• Press for Missed Calls.
• Press for All Calls.
• Press for Da ta Call.
• Press for Call Timer.
• Press for Data Counter .
Note: In cases where there is a Contacts match for a Calls log entry, the name associated with the number
appears in the display instead of the number.
Call Functions 29
Outgoing Calls
Your phone retains information about the last 90 outgoing calls and stores them in
the Outgoing calls log. You can review the Outgoing calls log for the time and date of
a call, as well as other information.
Note: To quickly view your most recent calls, briefly press in standby mode. Up to 270 of your most
recent outgoing, incoming, and missed calls appear in the display.
1. In standby mode, press the MENU key (), then press (for Calls)
)
)
@
and for Outgoing Calls. A list of your outgoing calls appears in the
SEND
OK
display.
2. Use the navigation keys to highlight a call, then press to view further
OK
information about the call.
3. Press the Options (right) soft key (). A pop-up menu containing the
following options appears in the display:
•Save — Save the number to your Contacts.
• Details — Calls to Contacts Only — Shows the entry for the called Contact.
•Erase — Erase the selected call from your Outgoing call log.
• Lock/Unlock — Protect the selected call from being erased.
• Erase All — Erase all calls from your Outgoing call log.
• View Timer — Shows the number of calls and/or the total time spent on the
Last Call, Outgoing Calls, Incoming Calls, Roaming Calls, All Calls, Last Reset,
and Lifetime Calls.
4. Press the Msgs (left) soft key (). The following options appear in the
display:
• Text Message — Lets you send a text message to the selected number called.
• Picture Message — Lets you send a picture message to the selected number
called.
• Video Message — Lets you send a video message to the selected number
called.
Note: See ‘Creating and Sending New Messages” on page 66 for more information.
5. Use the navigation keys to highlight an option.
6. Press the key to perform the highlighted option’s function.
OK
30
Loading...
+ 154 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.