All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to
the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to
Samsung and protected under federal laws, state laws, and international treaty provisions. Intellectual Property includes, but is not limited
to, inventions (patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation
and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you
agree that you will not (and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or
otherwise attempt to create source code from the software. No title to or ownership in the Intellectual Property is transferred to you. All
applicable rights of the Intellectual Property shall remain with SAMSUNG and its suppliers.
Samsung Telecommunications America (STA), LLC
Headquarters:Customer Care Center:
1301 E. Lookout Drive1000 Klein St.
Richardson, TX 75082Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Licensed by Qualcomm Incorporated under one or more of the following patents:
U.S. Patent No. 4, 901, 307; 5, 056, 109; 5, 099, 204; 5, 101, 501; 5, 103, 459; 5, 107, 225; 5, 109, 390.
T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat. 5,818,437; U.S. Pat. 5,953,541; U.S. Pat. 6,011,554 and
other patents pending.
VoiceSignal® and the VoiceSignal logo are registered Trademarks of VoiceSignal Technologies, Inc.
Openwave® is a registered Trademark of Openwave, Inc.
The Bluetooth® word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered
trademarks and are wholly owned by the Bluetooth SIG.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE
PURCHASER TAKES THE PRODUCT “AS IS”, AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
Table of Contents
Section 1: Getting Started .............................................. 4
Index ............................................................................135
3
Section 1: Getting Started
This section explains how to start using your Samsung My Shot
phone by activating your service, setting up your Voicemail, or
getting an understanding of how this manual is put together.
Understanding this User Manual
The chapters of this manual generally follow the same order as
the menus and sub-menus in your phone. A robust index for
quick reference to most features begins on page 135.
Also included is important safety information that you should
know before using your phone. Most of this information is near
the back of the guide, beginning on page 112.
Notes and Tips
Throughout this manual some text is set apart from the rest. In
this way, important information, quick methods for activating
features, to define terms, and more are emphasized. The
definitions for these methods are as follows:
•
Notes
— Explain alternative options within the current feature, menu,
or sub-menu.
•
Tips
— Provide quick or innovative methods for performing functions
related to the subject at hand.
•
Important
— Points out important information about the current
feature that could affect performance, or even damage your phone.
Text Conventions
This manual provides condensed information about how to use
your phone. To make this possible, the following terms and icon
appear in place of repeatedly-used procedural steps:
highlight
Use the Navigation key () to move a highlighting
effect onto a menu item or screen item of interest.
select
After “highlighting” a menu item or screen item,
press the
MENU-OK
key to launch, access, or save
a highlighted menu item or screen field of interest.
➔ Used in place of “select” in long “drill down”
procedure steps.
Example:
“...
Settings
➔
Call Settings
➔
Call Answer
...”
Charging the Battery
Your phone is powered by a rechargeable standard Li-Ion battery.
Only use Samsung-approved charging devices and batteries.
Samsung accessories are designed to maximize battery life. Use
of other accessories may invalidate your warranty and may
cause damage.
Getting Started 4
Use the Travel Adapter
The travel adapter included
with your phone is a
convenient, light-weight
charger that rapidly charges
your phone from any 120/220
VAC outlet.
1. Plug the large end of the Travel Adapter into a standard
120 VAC or 220 VAC wall outlet.
Important!:
For connection to an electrical supply not located in North
America, you must use an adaptor of the proper configuration for
the power outlet. Use of the wrong adapter could damage your
phone and void your warranty.
Correct
Incorrect
2. Insert the smaller end of the Travel Adapter into the
charger/accessory connector at the bottom end of your
phone.
5
Important!:
You must unplug the adapter before removing the battery from
the phone during charging to avoid damage.
Low battery indicator
The battery indicator () in the upper-right corner of the
display indicates power level. Monitor the battery strength and
ensure your battery is adequately charged.
•
Three bars () indicate a full charge.
•
An empty battery icon () indicates a near empty battery.
•
A blinking empty battery icon () and a tone sounding indicate you
have two to three minutes before the battery is too low to operate the
phone.
If you continue to use your phone without charging its battery, the
phone will shut down.
Activating Your Phone
Contact your Wireless Carrier and follow their instructions for
obtaining service, if necessary. We suggest that you read this
guide to fully understand the services your phone supports.
Install the Battery
Note:
Your phone comes packaged with a partially charged rechargeable
standard Li-Ion battery and travel adapter.
Important!:
You must fully charge the battery the first time you use your
phone, otherwise you could damage the battery. From fully
discharged to fully charged, the battery requires up to 4 hours of
charge time.
1. Insert the top end of the
battery first, matching
the gold contacts on the
inside of the battery to
those on the phone.
2. Press lightly on the
bottom end of the battery down into the phone until it slips
into place.
3. Place the battery cover
over the battery and slide
the battery cover into
place.
Remove the Battery
1. Press and hold to turn off the phone (if on).
2. Press down on the
battery cover release
latch (1) and slide the
cover (2) toward the
bottom end of the phone.
3. Lift the battery (3) up and
away from the phone,
bottom end first.
3
Getting Started 6
3
Turn Your Phone On
1. Open the flip on your phone, as
shown.
2. Press .
Note:
As with any other radio-transmitting
device, do not touch the antenna while
using your phone as this can affect call
quality and can cause the phone to
operate at a higher power level than is
necessary.
3. The phone begins searching for
a network signal.
TALK
4. Once the phone finds a signal,
the time, date, and day appear
in the second line of the display.
5. You’re now ready to place and
receive calls.
Note:
If you are outside of your carrier’s coverage or roaming area, the No
Service icon () appears at the top of the phone’s display. If you
cannot place or receive calls, try later when service is available, or at
another location.
7
Turn Your Phone Off
䊳
Press and hold for two or more seconds. Your phone
powers off.
Note:
If your phone is on and you press for less than one second, the
phone will not power off. This prevents your phone from being turned
off accidentally.
Setting Up Your Voicemail
Voicemail allows callers to leave voice messages, which can be
retrieved any time.
Note:
BACK
Press
Once your Voicemail account has been set up, you can use the
Voicemail folder (under the Message menu) to view details of voice
messages in your Voicemail box.
1. In standby mode, press and hold or dial your own
mobile number to dial Voicemail.
2. Follow the prompts in the new user tutorial to setup your
mail box.
Listen to Voicemail
1. In standby mode, press and hold or dial your own
mobile number to dial Voicemail. After connecting, you will
hear your voice greeting.
2. You are prompted to enter your password.
Section 2: Understanding Your Phone
This section outlines some key features of your phone. It also
describes the screen format and the icons that will be displayed
when the phone is in use.
Features of Your Phone
•
Domestic and international voice and text messaging service (available
on participating networks).
•
High speed data (CDMA 2000 1x Technology)
•
Bluetooth® Wireless Technology (see Note)
•
Global Positioning (GPS) Technology
•
PIM Functions
•
Picture (MMS) Messaging
•
Text (SMS) Messaging
•
E-mail Messaging
•
Built-in 1.3 Megapixel Digital Camera
•
Voice Dial
Note:
The My Shot™ phone supports the wireless handsfree profile and the
serial port profile for Bluetooth® wireless technology. The My Shot
does not support Bluetooth OBEX profiles.
Closed View of Your Phone
Features
1.
Volume Key
— Lets you adjust the ring volume in standby
mode, adjust the voice volume during a call, or mute the
ringer during an incoming call.
Understanding Your Phone 8
2.
Power / Accessory Connector
— Used to connect charging
accessories, a headset, or any available accessory cables
to your phone.
3.
Camera Lens
4.
Front Display
— The lens of your built-in camera.
— Indicates the status of your phone,
including status icons, message indicators, signal
strength, and so on.
5.
Camera Key
— Launches the Camera feature of your
phone and takes pictures, with the phone open or closed.
9
Open View (Front) of Your Phone
TALK
BACK
Features
1.
Main Display
— Indicates the status of your phone,
including numbers dialed, feature and function screens,
status icons, message indicators and contents, signal
strength, and so on.
Navigation Key
2.
— In Menu mode, lets you scroll through
the phone menu options. In Standby mode, lets you access
preset functions and one user-defined function.
3.
Left Soft Key
— Used to navigate through menus and
applications and to select the choice indicated at the
bottom left corner of the Main LCD.
4.
TALK Key
— Lets you place or receive a call. In standby
mode, press the key once to access the recent call log.
5.
Voicemail Key
— Lets you speed dial your Voicemail
account to review your voice messages.
6.
Special Function Keys
— Enter special characters. Perform
various functions.
7.
Microphone
— Lets the other caller hear you clearly when
you are speaking to them.
8.
Voice Recognition Key
— Used to launch VoiceSignal voice
recognition system.
9.
Alpha-numeric Keys
— Use these keys to enter numbers,
letters, and characters.
10.
BACK Key
— Deletes characters from the display when you
are in text entry mode. Press this key to return to the
previous menu or screen when navigating features on your
phone.
11.
END Key
— Ends a call. If you press and hold the END key,
the power goes On or Off. When you receive an incoming
call, press to send the call to voicemail.
12.
Right Soft Key
— Used to navigate through menus and
applications and to select the choice indicated at the
bottom right corner of the Main Display.
13.
MENU-OK Key
— Pressing when navigating through a
menu accepts the highlighted choice in a menu.
14.
Earpiece / Speaker
— Lets you hear ringing and alert
tones, alarm tones, and the other parties to calls.
Command Keys
Functions for the soft keys are defined by what appears above
each in the display. There are two soft keys, Left () and Right
().
Understanding Your Phone 10
Left Soft Key
TALK
TALK
TALK
TALK
TALK
TALK
TALK
B
A
C
K
B
A
C
K
B
A
C
K
B
A
C
K
Some functions of the Left soft key () are as follows:
•
In standby mode, press the
Celltop
soft key () to launch the
Celltop application. (For more information, refer to
page 63.)
•
When the Left soft key function is Edit, press the
edit a Contacts entry.
Right Soft Key
Some functions of the Right soft key () are as follows:
•
In standby mode, press the
Messages
menu.
•
When the Right soft key function is Options, press the
Messages
soft key () to launch the
() and a pop-up menu appears.
•
When the Right soft key function is Back, press the
() to back up one menu level.
MENU-OK Key
•
In standby mode, press the
MENU-OK
key () to launch the Main
Menu.
•
In a menu, press to accept the highlighted selection.
•
In camera mode, press to take a photo or to create a Picture
message.
•
When the
MENU-OK
key function is Edit, press the
edit a Draft message.
11
“Celltop”
Edit
soft key () to
Options
Back
soft key
Edit
key () to
on
soft key
TAL K Ke y
The
TAL K
TALK
key () is used to answer calls, dial calls, and to
recall the last number(s) dialed, received, or missed.
TALK
•
Press once to answer calls.
•
Enter a number and briefly press to make a call.
•
Briefly press in standby mode to display a list of recent calls to
and from your phone.
•
Press twice in standby mode to call the most recent number.
•
Press to pick up a waiting call. Press again to switch back to
TALK
TALK
TALK
TALK
TALK
the other call.
BACK Key
The
BACK
key () is used to erase or clear numbers, text, or
B
A
C
K
symbols from the display. You can also use the key to return to a
previous menu or to return to standby mode from any menu.
•
If you enter an incorrect character, briefly press to backspace
B
A
C
K
(and delete) the character.
•
To erase the entire sentence, press and hold .
•
To back up one menu level, briefly press .
B
A
C
K
B
A
C
K
END Key
•
Press and hold the
•
Briefly press once to disconnect a call.
•
Press to return to standby mode from any menu, or to cancel the
END
key () to turn your phone on or off.
last input.
Navigation Key
Use the directional keys on the Navigation key () to
browse menus, sub-menus, and lists. Each directional key also
acts as a shortcut to launch applications.
Camera Key
Use the Camera key () on the right side of the phone to
activate the camera built into your phone and to take pictures.
Volume Key
Use the Volume key () on the left side of the phone to
adjust ringer volume (in standby mode), to adjust voice call
volume (during a call), and to browse menu items.
Star Key
Use the Star key () to lock your phone (in standby mode) and
to shift capitalization and change text input mode when entering
text.
Pound Key
Use the Pound key () to launch the Axcess Search
application (in standby mode) and to insert a space when
entering text. (For more information about Axcess Search, refer
to “Axcess Search” on page 64.)
Understanding the Display Screen
1. The top line of your phone’s
1
display contains icons that
indicate network status,
battery power, signal
2
strength, connection type,
and more.
2. The center portion of the
3
display shows information
such as call progress information, messages, and photos.
3. The bottom line of the display shows current soft key
functions. The sample screen shows that pressing the Left
soft key () will display a
Menu-OK
key () will display the Main Menu, and
pressing the Right soft key () will show the
Celltop
screen, pressing the
Messages
menu.
Display Screen Icons
Your My Shot phone can show you definitions of the icons that
appear on the top line of the display.
Understanding Your Phone 12
To access the Icon Glossary:
TALK
䊳
In standby mode, select
Glossary
. A list appears showing the icons that can appear
MENU
➔
Phone Info
on the top line of the displays.
Dialogue Boxes
Dialogue boxes prompt for action, inform you of status, or warn
of situations such as low battery. Dialogue boxes and their
definitions are outlined below.
•
Choice
–
Example:
“Save Message?”
•
Reconfirm
–
Example:
“Erase All Messages?”
•
Performing
–
Example:
“Sending...” “Connecting...”
•
Completed
–
Example:
“Message Saved”
•
Information
–
Example:
“New Message”
•
Error
–
Example:
“System Error!”
•
Warning
–
Example:
“Low Battery,” “Memory Full!”
13
➔
Icon
Backlights
Backlights illuminate the display and the keypad. When you press
any key or open the phone, the backlights come on. They go off
when no keys are pressed within a period of time set in the
Backlight menu.
Note:
During a phone call, the display backlight dims and turns off after 10
seconds to conserve battery power, regardless of the Backlight setting.
(For more information, refer to “Backlight” on page 99.)
Your Phone’s Modes
Call Answer Mode
You can choose to answer a call by pressing any key except
or , by pressing only the key, or by opening the
TALK
phone’s flip. (For more information, refer to “Call Answer” on
page 101.)
Input mode
Input mode determines how you enter text, numbers, and
symbols. While at any text entry screen, press the Left soft key
(), then choose the input mode from the pop-up menu using
the Navigation key. Optional input modes are
Symbols
, and
123
. (For more information, refer to “Text Entry
T9 Word, Abc, ABC
Modes” on page 43.)
,
Tip:
TALK
You can cycle between
and holding the key until the phone beeps.
T9 Word, Abc
, and
123
Lock Mode
When the phone is in Lock Mode, restrictions are placed on
phone use. You can receive calls and messages, but cannot place
outgoing calls (except for emergency numbers) until you unlock
the phone. Lock Mode also restricts access to menus and the
Volume key.
To enter Lock Mode:
䊳
In standby mode, press and hold until “
mode
” appears momentarily in the display, followed by “
Locked –
”.
To exit Lock Mode:
1. While in Lock mode, press the
Unlock
prompted to enter the Lock Code.
2. Enter the lock code. “
– Locked –
” disappears from the
display.
Note:
The default lock code is the last four digits of your telephone number.
(For more information, refer to “Change Lock Code” on
page 105.)
by repeatedly pressing
Entering lock
soft key. You are
Standby Mode
Standby mode is the state of the phone once it has found service
and is idle. The phone goes into standby mode:
•
After you power the phone on.
•
When you press after a call or from within a menu.
In standby mode, you will see the time, day, and date as well as
all phone status icons.
Place Calls in Standby Mode
1. In standby mode, enter a phone number, and press to
place a call.
–
2. Press to return to standby mode.
Receive Messages in Standby Mode
While your phone is in standby mode, new incoming messages
automatically appear in the screen as they are received. Use the
Navigation key to scroll through text or to view complete images.
Talk Mode
You can place and receive calls only when your phone is on.
While in a call your phone is in talk mode. Press the
key to display a list of menu options. (For more information, refer
to “The In-Use Options” on page 27.)
Understanding Your Phone 14
Options
TALK
soft
Enter/Exit Silent Mode
Silences the ringers, the alerts, and the tones your keypad makes
when you press a key.
To enter Silent Mode:
䊳
In standby mode, repeatedly press the Volume key
() Down until “
then press
To exit Silent Mode:
䊳
While in Silent mode and standby mode, repeatedly press
SET
the Volume key () Up until “
().
Silence All
” appears in the display,
Silence All
”
disappears from the display and the desired ringer value
appears, then press
SET
().
Vibrate Mode
䊳
In standby mode, repeatedly press the Volume key
() down until “
then press
Note:
The Volume key is on the left side of phone.
SET
().
Vibrate
” appears in the display,
Adjust the Ringer
To adjust the Ringer volume, while in standby mode, press the
Volume key up or down.
15
1. In standby mode, press the Volume key up or down to set
the call ringer volume as desired.
Options are:
• Silence All • Low/Medium
•Vibrate •Medium
• 1 Beep• Medium/High
•Low •High
2. When you are satisfied with the setting, press
SET
().
Your phone returns to standby mode.
Note:
The Vibrate icon ( ) appears in the display when the phone is in
Vibrat e
mode. The No Ring icon () appears in the display when the
phone is in
Silence All
mode.
Camera Mode
Camera mode lets you take pictures with your phone’s camera.
In Camera mode, you can also adjust the resolution and
appearance of your pictures.
For more information, refer to “Camera” on page 65.
•
Entering Camera Mode
— In standby mode, press and hold the
Camera key () — on the right side of the phone.
•
Exiting Camera Mode
— Press the key.
Section 3: Call Functions
TALK
TALK
TALK
This section explains how to make or answer a call. This section
also includes the features and functionality associated with
making or answering a call.
Making a Call — Number Entry Dialing
1. With the phone on, enter the number you wish to call using
the keypad.
2. Press to place the call.
TALK
Dialing Emergency Numbers
When you call an Emergency Number, such as 911, your phone
locks itself in emergency mode, only allowing you to make calls
to the emergency call center you originally contacted. This
enables emergency operators to more easily dispatch aid, such
as police, fire fighting, and emergency medical personnel.
1. With the phone on, enter 911 using the keypad.
2. Press to place the call.
Important!:
TALK
Emergency number 911 is preset into your phone. You can dial
this number almost any time, even when the phone is locked or
restricted.
If you call 911 an audible tone is heard and an Emergency
prompt appears in the display for the duration of the call.
Important!:
Because of various transmission methods, network parameters,
and user settings necessary to complete a call from your
wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all
wireless networks at all times.
Important!:
DO NOT depend on this phone as a primary method of calling
911 or for any other essential or emergency communications.
Note:
You can specify other numbers than 911 as emergency numbers using
the Emergency # settings. (For more information, refer to “Emergency #” on page 105.)
Manual Pause Calling
When you call automated systems (like banking services), you
are often required to enter a password or account number.
Instead of manually entering the numbers each time, you can
store the numbers in your Contacts along with special characters
called pauses.
•
P Pause
— A hard pause stops the calling sequence until you press
TALK
.
•
T Pause
— A two-second pause stops the calling sequence for two
seconds and then automatically sends the remaining digits.
Call Functions 16
To manually call a number with pause(s) without storing it to your
TALK
Contacts:
1. Enter the number you wish to call.
2. Press the Options soft key.
A pop-up menu containing the following options appears in
the display:
•
P Pause
— a hard pause (awaits input from you).
•
T Pause
— a two-second pause.
Tip:
You can create pauses longer than two seconds by entering multiple T
Pauses.
3. Use the navigation keys to highlight the desired pause
option.
4. Press to enter the highlighted pause into your number
sequence.
5. Press to call the number.
TALK
Making a Call — Speed Dialing
You can store phone numbers and contact names in your phone’s
Contacts list. Speed Dialing lets you quickly and easily dial any
contact in your Contacts list by using that contact’s location
number in the list. You can assign and change location (speed
17
dial) numbers for your contacts. (For more information, refer to
“Assigning Speed Dial Numbers” on page 36.)
One-Touch Dialing
Speed Dial numbers 002 through 009 are special One-Touch
dialing numbers. You can call the phone numbers stored in your
phone’s Contacts list and assigned Speed Dial numbers 002
through 009 by pressing and holding a single key.
Example:
For Speed Dial number 003, press and hold until the name
and number appear in the display and the number is dialed.
Two-Touch Dialing
Memory locations 010 through 099 are special Two-Touch
dialing locations.
Example:
For Speed Dial number 013, briefly press , then press and hold
until the name and number appear in the display and the
number is dialed.
Three-Touch Dialing
Memory locations 100 through 999 are special Three-Touch
dialing locations.
Example:
For Speed Dial number 113, briefly press , briefly press
again, then press and hold until the name and number appear
in the display and the number is dialed.
Pause Dialing From a Contacts Entry
TALK
TALK
•
If you speed dial a contact that contains (two-second) T Pause(s)
simply wait for the pauses to pass and the dialing to complete.
•
If you speed dial a contact that contains (hard) P Pauses, wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and press to continue
your dialing sequence.
Making a Call — Quick Search Dialing
Use the Quick Search feature to dial any number stored in your
Contacts list by pressing the number keys that correspond to the
first few letters of a Contact name.
Note:
For information on activation, see “Quick Search” on page 108.
Quick Search Dialing a Contact
To find and dial a Contact, do the following:
1. In standby mode, press the number keys that correspond
to the first few letters of the Contact name, as shown.
2. Press the Up navigation key. The Contact list
appears showing the desired Contact name.
3. Highlight the desired Contact name, then press to call
the number.
TALK
Find
screen
TALK
Making a Call — Voice Dialing
Your My Shot mobile phone includes state-of-the-art voice
recognition software that lets you dial numbers using your voice.
Using Voice Dial
Use the Voice Dial command to dial any number stored in your
Contacts list by saying the name of the contact (Name Dialing).
You can also use Voice Dial to dial any valid telephone number,
even numbers not stored in your contact list, by speaking the
individual digits in the number (Digit Dialing).
Voice Dialing Tips:
•
Wait for the beep before speaking.
•
Speak clearly at a normal volume, as if you were talking to someone
on the phone.
•
When saying a name, say the first name then the last name.
Dialing a Name
To dial a name, do the following:
1. In standby mode, press and hold the key.
“Say a Command” appears in the display and is
pronounced through the earpiece.
2. Say, “Call”.
You are prompted to “Say the name or #”.
Call Functions 18
3.
B
A
C
K
Speak clearly and say the name of a person in your
Contacts list, first name followed by last name.
If the name is recognized, Voice Dial repeats the name and
dials the number.
If Voice Dial is not sure which name you said, it displays a
choice list of up to three names and prompts you with “Did
you say?” followed by the first name on the list.
4. Say “Yes ” to confirm the name or “No” to hear the next
name, or use the keypad to select the correct name from
the list. (For more information, refer to “Choice Lists” on
page 80.)
•
Press the
Repeat
soft key to say the name again.
B
A
C
K
•
Press to exit Voice Dial without dialing.
If the recognized name has multiple numbers stored for it
(that is, Home, Work, Mobile, and so on), Voice Dial
displays the possible choices and prompts you with
“Which number?”
5. Say one of the following number types:
•“Home
”
•“Work
”
19
•“Mobile
”
Voice Dial dials the specified number.
Dialing a Number
To dial a number using Voice Dial, do the following:
1. In standby mode, press and hold the key.
“Say a Command” appears in the display and is
pronounced through the speaker.
2. Say “Call”.
VoiceSignal prompts you to “Say the name or #”.
3. Speak clearly and say the telephone number of the person
you want to call. For example, say “7 8 1 9 7 0 5 2 0 0."
If it recognizes the number, Voice Dial repeats and dials the
number. If Voice Dial is not sure it has recognized the
number, it displays a choice list of up to three numbers and
prompts you with “Did you say?” followed by the first
number on the list.
4. Say “Yes ” to confirm the number or “No” to hear the next
one, or use the keypad to select the correct number from
the list.
(For more information, refer to “Choice Lists” on page 80.)
B
A
C
K
TALK
•
Press the
Repeat
soft key to say the name again.
B
A
C
K
•
Press to exit Voice Dial without dialing.
Pause Dialing From a Contacts Entry
•
If you voice dial a contact that contains (hard waits) P Pauses(s), wait
for the appropriate prompt(s) from the number you are calling (credit
card number, bank account number, and so on) and enter the
appropriate response(s).
•
If you voice dial a contact that contains (two-second) T Pause(s) simply
wait for the pauses to pass and the dialing to complete.
Answering a Call
Your phone notifies you of a call in the following ways:
•
A ring tone sounds and/or your phone vibrates (Your phone provides
eight ring volume settings including:
Low, Low/Medium, Medium, Medium/High
different ring types to distinguish callers.)
•
A phone number (unless blocked by the caller) and a name appear in
the display (If the caller’s number and name are stored in your
Contacts list).
•
If the caller can’t be identified,
restricted number
•
Your phone continues to notify you of the call until one of the following
Call from unavailable#, Call from
, or no number appears in the display.
events occurs:
Silence All
,
Vibrate
, or
High
,
1 Beep
, and/or
•
You answer the call.
•
You ignore the call.
•
The calling party ends the call.
•
The call is sent to voicemail.
Answering an Incoming Call
䊳
Press the key. The ring tone and/or vibration stop and
the caller’s voice can be heard in the earpiece.
Tip:
You can set your phone to answer calls automatically or when you press
any key but . (For more information, refer to “Call Settings” on
page 101.)
Ignoring a Call
When you ignore an incoming call, the call is immediately
,
forwarded to your voice mail.
䊳
During an incoming call, press the
caller is forwarded to your voice mail.
Adjusting the Call Volume
In standby mode, repeatedly press the volume key ()
down until the Call Volume Level desired appears in the display.
The volume key is on the left side of phone.
TALK
Ignore
soft key. The
Call Functions 20
Calls Log
TA
L
K
The Calls log retains information about Outgoing, Incoming, and
Missed calls. You can also view times for your last call and the
time totals for all calls.
Review the Calls Log
1. In standby mode, press MENU, then select Calls.
2. Press the number key associated with the Calls log that
you wish to review or the function you wish to access:
•
Press for
•
Press for
•
Press for
•
Press for
•
Press for Data Call
•
Press for Call Timer
•
Press for Data Counter
Note:
In cases where there is a Contacts match for a Calls log entry, the
name associated with the number appears in the display instead of the
number.
Outgoing Calls
Incoming Calls
Missed Calls
All Calls
.
.
.
.
.
.
.
Outgoing Calls
Your phone retains information about the last 90 outgoing calls
and stores them in the Outgoing calls log. You can review the
21
Outgoing calls log for the time and date of a call, as well as other
information.
T
A
L
Note:
To quickly view your most recent calls, briefly press in standby
mode. Up to 270 of your most recent outgoing, incoming, and missed
calls appear in the display.
K
1. In standby mode, press MENU, then select Calls ➔
Outgoing Calls. A list of your outgoing calls appears in the
display.
2. Select a call to view further information about it.
3. Press the Options soft key. A pop-up menu containing the
following options appears in the display:
•
Save
— Save the number to your Contacts.
•
Details
— Calls to Contacts Only — Shows the entry for the called
Contact.
•
Erase
— Erase the selected call from your Outgoing call log.
•
Lock/Unlock
•
Erase All
•
View Timer
— Protect the selected call from being erased.
— Erase all calls from your Outgoing call log.
— Shows the number of calls and/or the total time
spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming
Calls, All Calls, Last Reset, and Lifetime Calls.
Press the Msg soft key. The following options appear in
4.
the display:
•
Tex t Me ssa ge
— Lets you send a text message to the selected
number called.
•
Picture Message
— Lets you send a picture message to the
selected number called.
•
Postca rd
— Lets you send a postcard to the selected number
called.
Note:
For more information, refer to “Creating and Sending New Messages”
on page 47.
5. Select an option to perform its function.
Incoming Calls
Your phone retains information about the last 90 Incoming calls
and stores them in the Incoming call log. You can review the
Incoming call log for the time and date of the call, as well as
other information.
1. In standby mode, press MENU, then select Calls ➔
Incoming Calls. A list of your Incoming calls appears in
the display.
2. Select a call to view further information about it.
3. Press the Options soft key. A pop-up menu containing the
following options appears in the display:
•
Save
— Save the number to your Contacts.
•
Details
— Calls from Contacts Only — Shows the entry for the
calling Contact.
•
Erase
— Erase the selected call from your Incoming calls log.
•
Lock/Unlock
•
Erase All
•
View Timer
— Protect the selected call from being erased.
— Erase all calls from your Incoming calls log.
— Shows the number of calls and/or the total time
spent on the Last Call, All Calls, Outgoing Calls, Incoming Calls,
Roaming Calls, Lifetime Calls.
4. Press the Msg soft key. The following options appear in
the display:
•
Tex t Me ssa ge
— Lets you send a text message to the selected
calling number.
•
Picture Message
— Lets you send a picture message to the
selected calling number.
•
Postca rd
— Lets you send a postcard to the selected number
called.
Note:
For more information, refer to “Creating and Sending New Messages”
on page 47.
5. Select an option to perform its function.
Call Functions 22
Missed Calls
Your phone retains information about the last 90 missed calls
(calls that were never picked up) and stores them in the Missed
call log. You can review the Missed call log for the time and date
of the call, as well as other information.
1. In standby mode, press MENU, then select Calls ➔
Missed Calls. A list of your missed calls appears in the
display.
2. Select a call to view further information about it.
3. Press the Options soft key. A pop-up menu containing the
following options appears in the display:
•
Save
— Save the number to your Contacts.
•
Details
— Calls from Contacts Only — Shows the entry for the
calling Contact.
•
Erase
— Erase the selected call from your Missed call log.
•
Lock/Unlock
•
Erase All
•
View Timer
— Protect the selected call from being erased.
— Erase all calls from your Missed call log.
— Shows the number of calls and/or the total time
spent on the Last Call, All Calls, Outgoing Calls, Incoming Calls,
Roaming Calls, Lifetime Calls.
4. Press the Msg soft key. The following options appear in
the display:
23
•
Tex t Me ssa ge
— Lets you send a text message to the selected
called number.
•
Picture Message
— Lets you send a picture message to the
selected called number.
•
Postca rd
— Lets you send a postcard to the selected number
called.
Note:
For more information, refer to “Creating and Sending New Messages”
on page 47.
5. Select an option to perform its function.
All Calls
You can review all of the calls log entries (outgoing, incoming,
and missed calls) for the time and date of a call, as well as other
information.
1. In standby mode, press MENU, then select Calls ➔
All Calls. A list of all logged calls appears in the display.
2. Select a call to view further information about it.
3. Press the Options soft key. A pop-up menu containing the
following options appears in the display:
•
Save
— Save the number to your Contacts.
•
Details
— Calls from Contacts Only — Shows the entry for the
calling/called Contact.
•
Erase
— Erase the selected call from your Calls log.
•
Lock/Unlock
•
Erase All
•
View Timer
— Protect the selected call from being erased.
— Erase all calls from your Calls log.
— Shows the number of calls and/or the total time
spent on the Last Call, All Calls, Outgoing Calls, Incoming Calls,
Roaming Calls, Lifetime Calls.
4. Press the Msg soft key. The following options appear in
the display:
•
Tex t Me ssa ge
— Lets you send a text message to the selected
calling/called number.
•
Picture Message
— Lets you send a picture message to the
selected calling/called number.
•
Postca rd
— Lets you send a postcard to the selected number
called.
Note:
For more information, refer to “Creating and Sending New Messages”
on page 47.
5. Select an option to perform its function.
Data Call
Your phone retains information about the last 90 data calls and
stores them in the Data call log. You can review the Data call log
for the time, date, and duration of a data call, as well as other
information.
1. In standby mode, press MENU, then select Calls ➔
Data Call. A list of your data calls appears in the display.
2. Select a call to view further information about it.
3. Press the Options soft key. A pop-up menu containing the
following options appears in the display:
•
Erase
— Erase the selected data call from your Data Call log.
•
Lock / Unlock
— Protect the selected data call from being
erased.
•
Erase All
— Erase all calls from your Outgoing call log.
•
Data Counter
— Shows the total data Transmitted during the call,
Received during the call, Total data transmitted and received during
the call, the date and time the Data Counters were last reset, and
the Lifetime Data Counter.
4. Select an option to perform its function.
Call Timer
View the duration of your last call, total calls, and calls made
during the life cycle of you phone using the Call Timer feature.
Note:
Call Timer is not for billing purposes.
1. In standby mode, press MENU, then select Calls ➔
Call Timer.
Call Functions 24
The following options appear in the display:
•
Last Call
— View the duration of your last call.
•
Outgoing Calls
— View the duration of the total outgoing calls
made on your phone since the last erasure.
•
Incoming Calls
— View the duration of the total incoming calls
received on your phone since the last erasure.
•
Roaming Calls
— View the total calls duration on your phone
while roaming since the last erasure.
•
All Calls
— View the duration of the total call, incoming, outgoing,
and data calls made on your phone since the last erasure.
•
Last Reset
— View the time and date all timers were last reset.
•
Lifetime Calls
— View the duration of all calls since your phone
was activated.
2. Press the Reset () to reset a selected counter except
Last Reset and Lifetime Calls.
3. Press the Reset All () to reset all counters except
Lifetime Calls.
4. Press or if you wish to exit the list.
Note:
Although Total call timers can be erased, the Lifetime call timer can
never be erased.
25
Data Counter
View the amount of Transmit data, Receive data, and Total data
transmitted or received since the last time you reset the data
counters, and the Lifetime amount of data transmitted or
received.
Note:
Data Counter is not for billing purposes.
1. In standby mode, press MENU ➔ Calls ➔ Data Counter.
The following options appear in the display:
•
Tra n sm it
— View the total amount of data transmitted by your
phone since the last reset.
•
Received
— View the total amount of data received by your phone
since the last reset.
•
Tot a l
— View the total amount of data sent or received by your
phone since the last reset.
•
Last Reset
— View the time and date all timers were last reset.
•
Lifetime Data Counter
— View the total amount of data sent or
received by your phone since activation (Lifetime Data Counter
cannot be reset).
2. Press the Reset () to reset a selected counter except
Last Reset and Lifetime Data Counter.
3. Press the Reset All () to reset all counters except
Lifetime Data Counter.
B
B
A
C
K
A
C
Press or if you wish to exit the list.
4.
Note:
Although Total data counters can be erased, the Lifetime Data Counter
can never be erased.
K
Roaming
What is Roaming?
Roaming lets you use your phone when you travel outside of your
Wireless Provider’s coverage area. The Roaming icon ( )
appears in the top line of the display when Roaming is active,
and extra charges may apply when making or receiving calls.
Note:
Some features may be unavailable while roaming. Roaming also
consumes additional power from the battery requiring more frequent
recharging. Contact your Wireless Provider for more information about
Roaming.
How Roaming Works
Roam Option lets you set roaming preferences if you move in and
out of your home network. The following roaming options are
available:
•
Home only
— Your phone is available for normal operation only in the
designated coverage area.
•
Automatic
— Your Wireless Provider’s Preferred Roaming List (PRL) of
networks is used to acquire service. If no preferred networks are
found, any digital system is acquired.
Note:
For more information, refer to “System Select” on page 107.
Call Functions 26
Section 4: Menu Navigation
B
A
C
K
This section explains the menu navigation for your phone. It also
includes an outline of the menus available with your phone.
Menu Navigation
Access menus using the MENU key (), the Navigation key
(), the soft keys (), or a shortcut.
1. In standby mode, press MENU (). The Main Menu
appears in the display.
2. Use the Navigation key () to browse phone menus.
3. Press to access a menu or sub-menu highlighted in
the display.
Return to the Previous Menu
B
A
C
K
Press or Back () to return to the previous menu.
Navigation Key Shortcuts
In standby mode, press a navigation key (as illustrated below) to
launch its corresponding application.
27
Axcess Web
Music
Contacts(Find)
Axcess Shop
The In-Use Options
Access numerous menus and features even while in a call.
Note:
If the call is disconnected while accessing the In-Use Option, the InUse Option disappears from the display and the phone eventually
returns to standby mode.
1. While in a call, press Options (). The following menu
items appear in the display:
•Contacts
• Call History
— The Contacts
— View, respond to, and manage your recent
Find
screen appears in the display.
outgoing, incoming, and missed calls.
•Message
— The Messages menu appears in the display. (For
more information, refer to
“Messaging”
on page 47.)
Loading...
+ 112 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.