This product contains chemicals known to the State of California to cause cancer and reproductive toxicity.
Intellectual Property
All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers
relating to the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone
System”), is proprietary to Samsung and protected under federal laws, state laws, and international treaty provisions. Intellectual
Property includes, but is not limited to, inventions (patentable or unpatentable), patents, trade secrets, copyrights, software,
computer programs, and related documentation and other works of authorship. You may not infringe or otherwise violate the
rights secured by the Intellectual Property. Moreover, you agree that you will not (and will not attempt to) modify, prepare
derivative works of, reverse engineer, decompile, disassemble, or otherwise attempt to create source code from the software. No
title to or ownership in the Intellectual Property is transferred to you. All applicable rights of the Intellectual Property shall remain
with SAMSUNG and its suppliers.
Open Source Software
Some software components of this product incorporate source code covered under GNU General Public License (GPL), GNU Lesser
General Public License (LGPL), OpenSSL License, BSD License and other open source licenses. To obtain the source code covered
under the open source licenses, please visit:
http://opensource.samsung.com
SCH-R390_UM_Eng_FD04_CB_010214_F3
.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE
PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR
ITS FITNESS FOR ANY PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE
PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING
THERETO. NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR
ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, OR LOSS OF ANTICIPATED PROFITS
OR BENEFITS.
Modification of Software
SAMSUNG IS NOT LIABLE FOR PERFORMANCE ISSUES OR INCOMPATIBILITIES CAUSED BY YOUR EDITING OF REGISTRY SETTINGS,
OR YOUR MODIFICATION OF OPERATING SYSTEM SOFTWARE.
USING CUSTOM OPERATING SYSTEM SOFTWARE MAY CAUSE YOUR DEVICE AND APPLICATIONS TO WORK IMPROPERLY. YOUR
CARRIER MAY NOT PERMIT USERS TO DOWNLOAD CERTAIN SOFTWARE, SUCH AS CUSTOM OS.
Samsung Telecommunications America (STA), LLC
Headquarters:
1301 E. Lookout Drive
Richardson, TX 75082
Customer Care Center:
1000 Klein Rd.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
For 24 hour information and assistance, we offer a new FAQ/ARS System (Automated Response System) at:
www.samsung.com/us/support
The actual available capacity of the internal memory is less than the specified capacity because the operating system and default
applications occupy part of the memory. The available capacity may change when you upgrade the device.
Nuance®, VSuite™, T9® Text Input, and the Nuance logo are trademarks or registered trademarks of Nuance Communications, Inc., or its
affiliates in the United States and/or other countries.
Openwave® is a registered Trademark of Openwave, Inc.
RSA® is a registered Trademark RSA Security, Inc.
The Bluetooth® word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered
trademarks and are wholly owned by the Bluetooth SIG.
microSD™ and the microSD logo are Trademarks of the SD Card Association.
Table of Contents
Section 1: Getting Started ..............................................3
End User License Agreement for Software . . . . . . . . . . . . . . 105
Index ............................................................................ 110
Section 1: Getting Started
This section explains how to start using your phone by activating
your service, setting up your Voicemail, or getting an
understanding of how this manual is put together.
Understanding this User Manual
The chapters of this guide generally follow the same order as the
menus and sub-menus in your phone. A robust index for quick
reference to most features begins on page 110.
Also included is important safety information that you should
know before using your phone. Most of this information is near
the back of the guide, beginning on page 81.
Notes and Tips
Throughout this guide there is text that is set apart from the rest.
These are intended to point out important information, quick
methods for activating features, to define terms, and more. The
definitions for these methods are as follows:
•
Notes
: Explain alternative options within the current feature, menu, or
sub-menu.
•
Tips
: Provide quick or innovative methods for performing functions
related to the subject at hand.
•
Important
: Points out important information about the current feature
that could affect performance, or even damage your phone.
Getting Started 3
Text Conventions
This manual provides condensed information about how to use
your phone. To make this possible, the following terms and icon
appear in place of repeatedly-used procedural steps:
highlight
Use the
Navigation
key () to move a highlighting
effect onto a menu item or screen item of interest.
select
After “highlighting” a menu item or screen item,
press the
Center-Select
key () to launch,
access, or save a highlighted menu item or screen
field of interest.
➔ Used in place of “select” in long “drill down”
procedure steps.
Example:
“...
Settings
➔
Call Settings
➔
Auto Retry
...”
4
Battery
Your phone is powered by a rechargeable, standard Li-Ion
battery. A USB cable and Charging Head are included with the
phone, for charging the battery.
Note:
The battery comes partially charged. You must fully charge the battery
before using your phone for the first time. A fully discharged battery
requires up to 4 hours of charge time.
After the first charge, you can use the phone while charging.
Warning!:
Use only Samsung-approved charging devices and batteries.
Samsung accessories are designed to maximize battery life. Using
other accessories may invalidate your warranty and may cause
damage.
Battery Cover
The battery is under a removable cover on the back of the phone.
Removing the battery cover
䊳
Press down on the top of the cover and on the arrow at the
bottom of the cover, while sliding the cover off in the
direction of the arrow.
Installing the battery cover
䊳
Align the cover and slide it into place, making sure it snaps
securely at all four corners.
Getting Started 5
Installing the Battery
1. Remove the battery cover. For more information, refer to
“Removing the battery cover” on page 5.
2. Insert the top end of the battery into the phone housing,
aligning the gold contacts on the battery with the gold
contacts in the phone. Push down on the bottom of the
battery down until it snaps into place.
3. Install the battery cover. For more information, refer to
“Installing the battery cover” on page 5.
6
Removing the Battery
1. Remove the battery cover. For more information, refer to
“Removing the battery cover” on page 5.
2. Lift the battery up by the slot provided.
3. Lift the battery up and out of the phone.
Charging the Battery
DATA LINK CABLE
Incorrect
Charging Head
USB Cable
Correct
Incorrect
Your phone comes with a USB cable and charging head to rapidly
charge your phone from any 120/220 VAC outlet.
Note:
The battery comes partially charged. You must fully charge the battery
before using your phone for the first time. A fully discharged battery
requires up to 4 hours of charge time.
After the first charge, you can use the phone while charging.
1. Connect the USB cable to the charging head.
2. Insert the USB cable into the port at the base of the device.
Note:
This illustration displays both the correct and incorrect orientation for
connecting the charger. If the charger is incorrectly connected,
damage to the accessory port will occur therefore voiding the phone’s
warranty.
3. Plug the charging head into a standard AC power outlet.
Getting Started 7
4.
When charging is complete, the
battery indicator
() in
the upper-right corner of the display shows five unflashing
bars. Unplug the charging head from the power outlet and
remove the USB cable from the phone.
Important!:
It is recommended you fully charge the battery before using your
device for the first time.
Battery indicator
The battery indicator
() in the upper-right corner of the
display indicates power level. Monitor the battery strength and
ensure your battery is adequately charged.
•
Five bars
()
indicate a full charge.
•
An empty battery icon () indicates a near empty battery.
•
A blinking empty battery icon () and a tone sounding indicate you
have two to three minutes before the battery is too low to operate the
phone.
If you continue to operate the phone without charging, the phone
will power off.
8
Activating Your Phone
Contact your Wireless Provider and follow their instructions for
obtaining service, if necessary. We suggest that you read this
guide to fully understand the services your phone supports.
Warning!:
Your touch screen responds best to a light touch from the pad of
your finger or a non-metallic stylus. Using excessive force or a
metallic object when pressing on the touch screen may damage
the tempered glass surface and void the warranty (see “Warranty Information” on page 101).
Turning Your Phone On
䊳
Press and hold
Note:
As with any other radio-transmitting device, do not touch the antenna
while using your phone as this can affect call quality and can cause the
phone to operate at a higher power level than is necessary.
End
until the display lights.
Turn Your Phone Off
䊳
Press and hold
End
for two or more seconds. Your
phone powers off.
Voicemail
Correct
Incorrect
Setting Up Your Voicemail
Voicemail allows callers to leave voice messages, which can be
retrieved any time.
Note:
Once your Voicemail account has been set up, you can use the
Voicemail folder (under the
messages in your Voicemail account.
1. In standby mode, press and hold or dial your own
Messages
menu) to view details of voice
mobile number to dial your Voicemail account.
2. Follow the prompts in the new user tutorial to setup your
mail box.
Listen to Voicemail
1. In standby mode, press and hold or dial your own
mobile number to dial Voicemail. After connecting, you will
hear your voice greeting.
2. You are prompted to enter your password.
Memory Card
Your phone supports optional, removable microSD™ or
microSD™HC memory cards of up to 32GB capacity (not
included). You can store music, pictures, videos, and other files
on a memory card.
Installing a Memory Card
1. Pull the memory card cover out and turn it to expose the
card slot.
2. Push the memory card into the slot until it locks into place.
Getting Started 9
Removing a Memor y Card
1. Pull the memory card cover out and turn it to expose the
memory card in the card slot.
2. Press on the memory card to release the lock, then remove
the card.
Formatting
Formatting erases all content from the memory card and
prepares it for use with your phone.
Formatting a Memory Card using Your Phone
1. In standby mode, press MENU, then select
2. At the prompt, highlight
Formatting a Memory Card using Your PC
Settings
➔
Memory ➔ Card Memory ➔ Format Card
Yes
, then press OK.
For best playback of songs stored on a microSD™ or
microSD™HC memory card, use the PC file system FAT32. For
more information about using a PC to format memory cards,
consult your PC and/or memory card reader documentation.
10
.
Section 2: Understanding Your Phone
This section outlines some key features of your Samsung
SCH-R390 phone. It also describes the screen format.
Your Phone’s Features
•
Domestic and international voice and text messaging service (available
on participating networks).
•
Large 2.4 inch (diagonally) color screen (320 x 240 pixel resolution)
•
High speed data (CDMA 2000 1x Technology)
•
Bluetooth® Wireless Technology (see Note)
•
Global Positioning System (GPS) Technology
•
Digital Assistant Tools
•
QWERTY Keypad
•
Text (SMS), Picture/Video (MMS), Email, Commercial Mobile Alerting
System (CMAS), and Social Network (Facebook, MySpace, and Twitter)
Messaging
•
Built-in 2.0 Megapixel Digital Camera
•
Voice Dial
•
Music Player (requires an optional Memory Card)
•
Memory Card Slot (microSD™ and microSDHC™ up to 32 GB)
Note:
The SCH-R390 phone supports the wireless headset, hands-free, dial
up networking, stereo (A2DP), phonebook access, object push, and file
transfer profiles for Bluetooth® wireless technology.
Understanding Your Phone 11
Front View of Your Phone
1
2
3
4
5
8
9
10
6
7
Features
1.
Earpiece
: Allows you to hear callers and alerts.
2.
Display
: Displays information to operate your phone.
12
3.
Left Soft Key
of the bottom line of the display.
4.
Send Key
mode to launch the Recent Calls list.
5.
Speakerphone Key
speakerphone.
6.
Navigation Key
phone menu. From standby mode, press up or down or left
or right for shortcuts. (For more information, refer to
“Navigation Key” on page 18.)
7.
Back Key
menu mode, press to return to a previous screen or menu.
8.
End/Power Key
return to
On or Off. When you receive an incoming call, press to send the
call to Voicemail.
9.
Right Soft Key
the right of the bottom line of the display.
10.
Center-Select Key
at the center of the bottom line of the display.
: Press to the command displayed at the left
: Press to place or receive a call. Press in standby
: Press and hold to enable/disable
: In menu mode, press to scroll through the
: In a text entry field, press to delete characters. In
: Ends a call. When navigating, press to
the Home screen. Press and hold to power the phone
: Press to select the command displayed at
: Press to select the command displayed
Features
1
5
3
4
2
6
7
8
9
10
Keypad
1.
Voicemail Key
Voicemail.
2.
Shift Key
Capitalization remains as selected until you press the Shift
key again.
3.
Fn Key
QWERTY keypad to enter numbers and symbols as well as
letters.
: In standby mode, press and hold to dial
: Toggles capitalization for text input.
: Toggles the text input mode to let you use the
4.
Sym/Lock Key
Symbols screen for selecting symbols. From standby
mode, press and hold this key to lock the keypad.
5.
Voice SVC Key
launch Voice SVC. (For more information, refer to “Voice
SVC” on page 68.)
6.
Space/Vibrate Mode Key
words and characters. In standby mode, press and hold to
activate Vibrate mode.
7.
Calendar Key
8.
Messaging Key
9.
Enter Key
in a message.
10.
Backspace Key
the display. In menu mode, returns you to the previous
menu or screen.
: When entering text, press to launch a
: From standby mode, press and hold to
: Lets you enter spaces between
: Launches you phone’s Calendar tool.
: Launches the
: Press to move the insertion point to the next line
: In text entry mode, deletes characters from
Messages
menu.
Understanding Your Phone 13
Side Views of Your Phone
1
2
3
Features
1.
Volume Key
Volume. When receiving a call, lets you temporarily mute
the ringer.
2.
microSD (Memory Card) Slot
optional microSD Memory Card for additional image/photo
storage and for music storage.
3.
Camera Key
backlight and launches the Camera feature of your phone.
In Camera mode, takes pictures.
: In standby mode, lets you adjust the System
: Lets you install and remove
: From standby mode, lights the front display
14
Rear View of Your Phone
1
2
4
3
Features
1.
Headset Connector
(for hands-free operation and/or music playback) or an
optional TTY device.
2.
Camera Lens
3.
Power/USB Connector
accessories or optional USB Data cable to your phone.
4.
Speaker
your phone.
: Used to connect an optional headset
: The lens of your built-in camera.
: Used to connect charging
: Reproduces music and other sounds played by
Understanding Your Phone 15
Command Keys
Left Soft Key
Some functions of the
•
In standby mode, press the
menu.
•
In text input fields, press the
method.
Right Soft Key
Some functions of the
•
In standby mode, press the
your Contact List.
•
When the
Right Soft
for the current item.
Center-Select Key
Some functions of the
•
In standby mode, press the
•
In a list, press the
Center-Select
highlighted item.
•
In a menu, press
the
selection.
•
In camera mode, press
16
Left Soft
key () are as follows:
Left Soft
key to open the
Left Soft
key to select the text input
Right Soft
key () are as follows:
Right Soft
key function
key function is
Center-Select
Options
key () are:
Center-Select
key to open the Main Menu.
key to view, select, launch, or play a
Center-Select
key to accept the highlighted
the
Center-Select
key to take a photo.
Messaging
Contacts
to open
, press to choose options
Send Key
The
Send
key () is used to answer calls, dial calls, and to
recall the last number(s) dialed, received, or missed.
•
When receiving a call, press
•
In standby mode, enter a number and press the
the
Send
key once to answer the call.
Send
call.
•
In standby mode, press the
Send
key to display the
calls to and from your phone.
•
Press the
Send
key twice in standby mode to call the most recent
number.
•
With two active calls, press the
Press
the
Send
key again to switch back to the original call.
Send
key to pick up a waiting call.
Volume Key
Use the
Volume
key () to adjust volume:
•
In standby mode, press the
•
In standby mode, press and hold the
Volume
key to adjust Master Volume.
Volume
key down to activate
Sounds Off.
•
During calls, press the
•
During music playback, press the
•
Press the
Volume
Volume
key to adjust voice volume.
Volume
key to adjust audio volume.
key to mute the ringtone of an incoming call.
key to make a
All Calls
list of
BACK Key
The
Back
key () is used to return to a previous menu or
screen. In some screens, you can also use the key to erase or
clear numbers, text, or symbols from the display.
•
Press the
Back Key
to back up one menu level.
Delete Key
The
Delete
key () is used to erase or clear numbers, text, or
symbols from the display.
•
If you enter an incorrect character, briefly press to backspace (and
delete) the character.
•
To erase the entire sentence, press and hold .
End Key
•
Press and hold the
•
Briefly press to disconnect a call.
•
Press to return to standby mode from any menu, or to cancel the
End
key
() to turn your phone on or off.
last input.
Camera Key
䊳
In standby mode, press and hold the
Camera
key ()
located on the right side of your phone.
When in camera mode, pressing the Camera Key takes a
picture.
Shift Key
䊳
When in a text entry field, press the
switch between
abc
(lower case) modes. Press twice quickly to lock
Abc
(initial case),
Shift
key
ABC
()
(upper case), and
to
ABC
mode, then press again to unlock.
Fn Key
While in input mode, the Fn (Function) key () lets you toggle
text input modes between
locked
123/Sym
.
Abc
and single-character
Understanding Your Phone 17
123/Sym
and
Navigation Key
Multimedia
easyedge
CalendarVoice Commands
In standby mode, press the
Navigation
key up or down, left or
right to launch menus and features in the pattern shown here.
Note:
You can change the shortcuts assigned to the UP, LEFT, and RIGHT
Navigation keys. (For more information, refer to “Set Shortcuts” on
page 79.)
Spacebar/Vibrate Mode Key
• In standby mode, p
ress and hold the
Spacebar/Vibration
key
() on the QWERTY keyboard to activate or deactivate Vibrate
mode.
•
In a text entry field press
Spacebar/Vibration
to insert a space
between character or words.
18
Calendar Key
䊳
In standby mode, press the
Calendar
QWERTY keyboard to quickly open Calendar function.
Message Key
䊳
In standby mode, press the
Messaging
QWERTY keyboard to quickly open the
Voice Command Key
䊳
In standby mode, press and hold the
()
to activate the Voice recognition feature.
Speakerphone Key
䊳
In standby mode, press the
Speakerphone
switch between the earpiece and the speakerphone,
before or during a call.
Lock/Symbol Key
•
In standby mode, press and hold the
Lock/Symbol
or unlock the keypad.
•
When in a text entry field press the
symbols. Press the
Navigation
Lock/Symbol
key left or right to scroll through the
symbols.
key
()
on the
key
()
MESSAGING
Voice Command
key () to
key
() to lock
key
to enter
on the
menu.
key
Menu Navigation
2
1
35
4
6
Access the menus and sub-menus in your phone using the
Navigation
key, soft keys, and Menu Shortcuts.
1. In standby mode, press
MENU
. The Main Menu (the
first of several menus) appears in the display.
2. Use the
3. Press
Navigation
key to browse through the menus.
OK
to enter a menu or sub-menu for a higher
menu icon or option that appears highlighted in the
display.
4. Press to return to the previous menu.
Using Menu Shortcuts
Use menu shortcuts to quickly access menus and sub-menus.
From a numbered menu, on the keypad, press the number to the
left of the menu label to jump to the desired menu, sub-menu, or
feature.
Example:
To access the
Menu
Bluetooth
sub-menu: Press the
➔
Tools
➔ for Bluetooth.
Center/Select
Understanding the Display Screen
1.
Status Line
key
icons that indicate network status, battery power, signal
strength, and more.
2.
Auto Answer Icon
: The top line of your phone’s display contains
: Indicates that the Auto Answer feature is
active.
3.
Left Soft Key Function
: The bottom line of the display shows
current soft key function. The sample screen shows that
pressing the Left Soft Key (
MESSAGING
Menu.
Messaging
) will display the
Understanding Your Phone 19
4.
Center Soft Key Function
: The bottom line of the display
shows current soft key function. The sample screen shows
that pressing the Center Soft Key (
MENU
) will display the
Main Menu.
5.
Right Soft Key Function
: The bottom line of the display
shows current soft key functions. The sample screen
shows that pressing pressing the Right Soft Key
(
Contacts
6.
Clock Display
) will show the Contacts-
: Displays the day, date, and time.
Find
screen.
Display Screen Icons
Your phone can show you definitions of the icons that appear on
the top (Status) line of the display.
To access the Icon Glossary:
䊳
In standby mode, press MENU ➔
Phone Info
➔
Icon Glossary
. A scrollable list appears
Settings
➔
showing the icons that can appear on the top line of the
displays.
20
Dialogue Boxes
Dialogue boxes prompt for action, inform you of status, or warn
of situations such as low battery. Dialogue boxes and their
definitions are outlined below.
•
Choice
–
Example:
“Save Message?”
•
Reconfirm
–
Example:
“Erase All Messages?”
•
Performing
–
Example:
“Sending...” “Connecting...”
•
Completed
–
Example:
“Message Saved”
•
Information
–
Example:
“New Message”
•
Error
–
Example:
“System Error!”
•
Warning
–
Example:
“Low Battery,” “Memory Full!”
Section 3: Entering Text
Entering Text
Your phone has a QWERTY keypad for quick and easy text input.
You can enter text as you would when using a computer
keyboard.
The keys are labeled with a letter on the lower half and a number
or symbol on the upper half. Press the key corresponding to the
character you want to enter.
Use these keys to enter numbers, letters, and special characters:
Backspace
: Press to delete the previous character.
Press and hold to delete the previous word.
Enter
: Press to move to the next line of text.
Shift
: Press to switch between
(upper case), and
twice quickly to lock
abc
Abc
(initial case),
(lower case) modes. Press
ABC
mode, then press again to
ABC
unlock.
Space
: Press to insert a space.
Function
: Press to cycle between text entry modes
Abc and 123/SYM.
SYM/Lock: Press
characters (symbols). Press the
right to scroll through symbols. Press
soft key) and
SYM/Lock
to select special
Navigation
Next
(the Right soft key) to show
Prev
key left or
(the Left
additional pages of symbols. Press OK or a
number key to enter a symbol in the text. Press
to exit and return to the text entry field.
When in a text entry field, press the Left soft key (Entry
Mode) to display the following:
•
T9 word/T9 Word/T9 WORD
: T9 Word is a predictive text entry mode
that recognizes common words, which match the sequence of your
key presses, and inserts the most common word into your text.
•
abc/Abc/ABC
telephones, and is the default text entry mode when using the external
keypad.
•
123/Sym
: Abc mode is standard text entry mode for mobile
: Use 123 mode to enter numbers and symbols (as shown on
the non-numeric keys) into a text field.
•
Symbols
: Use the alpha-numeric keys to enter corresponding symbols
listed in pop-up screens.
Note:
To enter, press the key for the number corresponding to a symbol.
Entering Text 21
Section 4: Call Functions
This section provides procedures for making and answering
calls. This section also describes features, such as call logs and
call timers, that help you make calls and manage your call time.
Making a Call
1. With the phone on, enter the number you wish to call using
the keypad.
2. Press
Send
to place the call.
Three-way Calling
Call two other numbers and connect them to your call using
three-way calling.
1. In standby mode, enter the number for the first party in
your call, then press
2. When connected, ask the other party to remain on the line.
Press
3. Enter the second party’s phone number and press
4. When the second party answers, press
Send
Send
.
Send
.
to place them on hold.
Send
to
connect all three parties.
22
Dialing International Numbers
Call Another Country — Manual Method
1. In Standby mode, enter 011 (the three-digit exit code for
the United States).
2. Enter the country code for the country that you are calling.
3. Enter the number that you wish to call, then press .
Note:
Puerto Rico and Canada are on the North American dialing plan.
Making calls to Puerto Rico and Canada is similar to making calls
within the United States, no unique country codes are necessary.
Call Another Country — Shor tcut Method
1. In Standby mode, press . A plus sign (+) appears in the
display.
Note:
When you press , your phone automatically replaces this + with
011, the three-digit exit code for the United States.
2. Enter the country code for the country that you are calling,
or press until a second plus sign (+) appears in the
display.
Tip:
If you place most or all of your international calls to numbers in the
same country, set-up the International Dialing shortcut to dial that
country’s code for you. (For more information, refer to “International Dialing” on page 75.)
Note:
When you press , your phone automatically replaces the second +
with the two-digit country code you have selected for the
International Dialing shortcut.
3. Enter the number that you wish to call, then press .
Manual Pause Calling
To manually call a number with pause(s) without storing it in your
Contacts list:
1. In standby mode, enter the number you wish to call.
2. Press
Options
. The following options appear in the display:
• Add 2-Sec Pause
•
Add Wait
3. Highlight and press
4. Press
Tip:
Press Save to store pauses along with the number if you plan to call the
number frequently.
: A 2-second pause after which dialing resumes.
: A hard pause (waits for input from you).
OK
to select the desired option.
Send
to call the number.
Call Functions 23
Speed Dialing
Speed Dialing lets you place a call to any Contact stored in your
Contacts list by dialing the Contact’s Location number.
1-Touch Dialing
Use 1-touch dialing to speed dial Contacts from 1 (Voicemail)
through 9.
䊳
In standby mode, press and hold the number key
corresponding to the desired Contact’s speed dial number.
2-Touch Dialing
Use 2-touch dialing to speed dial Contacts from 10 through 99.
1. In standby mode, press and release the number key
representing the first digit of the desired Contact’s speed
dial number.
2. Press and hold the number key representing the second
digit of the desired Contact’s speed dial number.
24
3-Touch Dialing
Use 3-touch dialing to speed dial Contacts from 100 through 999.
1. In standby mode, press and release the number key
representing the first digit of the desired Contact’s speed
dial number.
2. Press the number key representing the second digit of the
desired Contact’s speed dial number.
3. Press and hold the number key representing the third digit
of the desired Contact’s speed dial number.
Answering a Call
䊳
To answer an incoming call, press
Note:
To choose other options for answering calls, see “Answer Options” on
page 74.
Send
.
Sending Calls to Voicemail
䊳
To ignore a call and send it to voicemail, press
Tip:
To silence the ringer on an incoming call, press Quiet, or press
the
Volume
key () down.
Ignore
.
Answering Call-Waiting Calls
When you receive a call while on a call:
•
To place the first call on hold and answer the new call, press
Send
.
•
To return to the first call, press Send again.
Call In-Progress Options
You can access menus and features while in a call:
䊳
Press
Options
for these options:
•New Text Msg
• Contact List
• Recent Calls
• Send DTMF
: Display the
: Diplay the
: View the
NEW TEXT MESSAGE
CONTACT LIST
ALL CALLS
log.
screen.
: Send your phone number as DTMF (touch) tones to
the other person on the call.
• Bluetooth
: Display the BLUETOOTH MENU screen
•Memo Pad
•Location
: Launch the Memo Pad to create or edit a text Memo.
: Set your phone’s GPS Location On or to E911
(emergency calls) Only.
• Voice Privacy
: Choose Standard or Enhanced voice encryption,
where available.
䊳
To control whether the other caller can hear you, press
Mute/Unmute
.
screen.
Voice Commands
Voice Commands is advanced speech recognition software that
recognizes your spoken commands to dial phone numbers,
create messages, and launch phone features such as Contacts,
Calendar, and My Music.
To use Voice Commands, speak naturally into your phone, at a
distance of 3-12 inches. There is no need to “train” Voice
Commands, it is designed to recognize natural speech.
䊳
In standby mode, press and hold
Voice Commands
– or –
In standby mode, press MENU, then select
Voice SVC ➔ Voice Commands
Note:
At each step, Voice Commands displays a list of available commands.
If Voice Commands does not recognize your command, it will prompt
you to confirm.
Tip:
Press
Help
at any time to display helpful tips for using Voice Commands.
.
Too ls
You can perform the following functions with Voice Commands:
•
Call <Name or Number>:
Place a call to a saved contact, to a
telephone number, or to voicemail.
•
Send <MSG Type>
: Create a Text/Picture/Video message to a saved
contact, or to a telephone number.
Call Functions 25
.
➔
Loading...
+ 88 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.