All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to
the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to
Samsung and protected under federal laws, state laws, and international treaty provisions. Intellectual Property includes, but is not limited
to, inventions (patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation
and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you
agree that you will not (and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or
otherwise attempt to create source code from the software. No title to or ownership in the Intellectual Property is transferred to you. All
applicable rights of the Intellectual Property shall remain with SAMSUNG and its suppliers.
Samsung Telecommunications America (STA), LLC
Headquarters:
1301 E. Lookout Drive
Richardson, TX 75082
Toll Free Tel:
Internet Address:
Nuance®, VSuite™, T9® Text Input, and the Nuance logo are trademarks or registered trademarks of Nuance Communications, Inc. or its
affiliates in the United States and/or other countries.
The Bluetooth® word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered
trademarks and are wholly owned by the Bluetooth SIG.
microSD™, microSDHC™, and the microSD logo are Trademarks of the SD Card Association.
Openwave® is a registered Trademark of Openwave, Inc.
Loopt® is a registered Trademark of Loopt, Inc.
Open Source Software
Some software components of this product incorporate source code covered under GNU General Public License (GPL), GNU Lesser General
Public License (LGPL), OpenSSL License, BSD License and other open source licenses. To obtain the source code covered under the open
source licenses, please visit:
http://opensource.samsungmobile.com/index.jsp
.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER
TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR PURPOSE
OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE
PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE,
SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO CREATE
AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH OF THE
EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
Table of Contents
Section 1: Getting Started ..............................................4
End User License Agreement for Software . . . . . . . . . . . . . . 117
Index ............................................................................122
3
Section 1: Getting Started
This section explains how to start using your Samsung R380
phone by activating your service, setting up your Voicemail, or
getting an understanding of how this manual is put together.
Understanding this User Manual
The chapters of this guide generally follow the same order as the
menus and sub-menus in your phone. A robust index for quick
reference to most features begins on page 122.
Also included is important safety information that you should
know before using your phone. Most of this information is near
the back of the guide, beginning on page 93.
Notes and Tips
Throughout this guide there is text that is set apart from the rest.
These are intended to point out important information, quick
methods for activating features, to define terms, and more. The
definitions for these methods are as follows:
•
Notes
: Explain alternative options within the current feature, menu, or
sub-menu.
•
Tips
: Provide quick or innovative methods for performing functions
related to the subject at hand.
•
Important
: Points out important information about the current feature
that could affect performance, or even damage your phone.
Text Conventions
This manual provides condensed information about how to use
your phone. To make this possible, the following terms and icon
appear in place of repeatedly-used procedural steps:
highlight
Use the Navigation key () to move a
highlighting effect onto a menu item or screen item of
interest.
select
After “highlighting” a menu item or screen item,
press the OK key () to launch, access, or save a
highlighted menu item or screen field of interest.
➔ Used in place of “select” in long “drill down”
procedure steps.
Example:
“...
Settings
➔
Call Settings
➔
Answer Options
Getting Started 4
...”
Installing the Battery
Note:
Your phone comes packaged with a partially charged rechargeable
standard Li-Ion battery and travel adapter.
Important!:
You must fully charge the battery the first time you use your
phone, otherwise you could damage the battery.
1. Insert the top end of the
battery first, matching the
gold contacts on the top of
the battery to those on the
phone.
2. Press lightly on the bottom
end of the battery down
into the phone until it slips into place.
3. Seat the battery cover
on the back of the phone
(1) and press the battery
cover up into place (2).
5
Remove the Batter y
1. Press and hold the
key to turn off the phone
(if on).
2. Press the battery cover
down until it releases
from its catches (1).
Then, lift the cover away from the phone (2).
3. Lift the battery (1) up at
the bottom and away
from the phone (2).
Charging the Battery
Charging Head
Incorrect
Correct
USB Cable
Correct
Incorrect
Your phone is powered by a rechargeable standard Li-Ion battery.
Only use Samsung-approved charging devices and batteries.
Samsung accessories are designed to maximize battery life. Use
of other accessories may invalidate your warranty and may
cause damage.
Use the Travel Adapter
The travel adapter included with your phone is a convenient,
light-weight charger that rapidly charges your phone from any
120/220 VAC outlet.
1. Plug the large end of the Travel Adapter into a standard
120 VAC or 220 VAC wall outlet.
Important!:
For connection to an electrical supply not located in North
America, you must use an adapter of the proper configuration for
the power outlet. Use of the wrong adapter could damage your
phone and void your warranty.
2. Insert the USB Data Cable into the Travel Adapter (see
above) and into the charger/accessory connector on the
upper right side of your phone, as shown here.
Important!:
You must unplug the adapter before removing the battery from
the phone during charging to avoid damage.
Low battery indicator
The battery indicator () in the upper-right corner of the
display indicates power level. Monitor the battery strength and
ensure your battery is adequately charged.
•
Five bars () indicate a full charge.
•
An empty battery icon () indicates a near empty battery.
•
A blinking empty battery icon () and a tone sounding indicate you
have two to three minutes before the battery is too low to operate the
phone.
Getting Started 6
If you continue to use your phone without charging its battery, the
phone will shut down.
Activating Your Phone
Contact your Wireless Provider and follow their instructions for
obtaining service, if necessary. We suggest that you read this
guide to fully understand the services your phone supports.
Warning!:
Your touch screen responds best to a light touch from the pad of
your finger or a non-metallic stylus. Using excessive force or a
metallic object when pressing on the touch screen may damage
the tempered glass surface and void the warranty (see “Warranty Information” on page 113).
Turning Your Phone On
1. Press and hold the key until the display lights.
Note:
As with any other radio-transmitting device, do not touch the antenna
while using your phone as this can affect call quality and can cause the
phone to operate at a higher power level than is necessary.
2. The phone begins searching for a network signal.
3. Once the phone finds a signal, the time, date, and day
appear near the top of the display.
4. You’re now ready to place and receive calls.
7
Note:
If you are outside of your carrier’s coverage or roaming area, the No
Service icon () appears at the top of the phone’s display. If you
cannot place or receive calls, try later when service is available, or at
another location.
Turn Your Phone Off
䊳
Press and hold the key for two or more seconds. Your
phone powers off.
Note:
If your phone is on and you press for less than one second, the
phone will not power off. This prevents your phone from being turned
off accidentally.
Setting Up Your Voicemail
Voicemail allows callers to leave voice messages, which can be
retrieved any time.
Note:
Once your Voicemail account has been set up, you can use the
Voicemail folder (under the
messages in your Voicemail box.
Messages
menu) to view details of voice
1. In Standby mode, press and hold the key or dial your
own mobile number to dial Voicemail.
2. Follow the prompts in the new user tutorial to setup your
mail box.
Listen to Voicemail
1. In Standby mode, press and hold the key or dial your
own mobile number to dial Voicemail. After connecting,
you will hear your voice greeting.
2. You are prompted to enter your password.
Memory Card (Optional)
Your phone has a Memory Card slot on its left side. You can
install a microSD™ or microSDHC™ Memory Card to provide
additional memory for storing files (such as, sound files and
photos) in your phone.
Install a Memory Card
1. Open the memory card slot cover on the left side of your
phone.
Incorrect
Correct
2. Carefully insert the Memory Card — label side facing up
and smaller end pointing toward the phone — into the
Memory Card slot, as shown, until you feel it click into
place.
3. Replace the battery cover.
Note:
When you install a new microSD or microSDHC card in your R380
phone, it creates the file folders needed for storing multimedia files.
If you install a microSD or microSDHC card that has been used in
another device, you should format the card. (For more information,
refer to “Memory” on page 92.)
Do not add other file folders or file types to the Memory Card with
another device. This slows the phone’s access to files on the Memory
Card. Instead, use the R380 to download files to the Memory card or
use the USB data cable with the R380 to add files to the Memory Card.
Remove a Memor y Card
1. Open the memory card slot cover on the left side of your
phone.
2. Carefully press the Memory Card inward until you feel it
release.
3. Slowly release your pressure on the card. It will slide
outward a short distance.
4. Remove the Memory Card from the Memory Card slot.
Getting Started 8
If desired, install another Memory Card. (For more
5.
information, refer to “Install a Memory Card” .)
6. Replace the battery cover.
9
Section 2: Understanding Your Phone
1
2
3
This section outlines some key features of your Samsung R380
phone. It also describes the screen format.
Your Phone’s Features
•
Domestic and international voice and text messaging service (available
on participating networks).
•
Large 2.2 inch (diagonally) color screen (320 x 240 pixel resolution)
•
High speed data (CDMA 2000 1x Technology)
•
Bluetooth® Wireless Technology (see Note)
•
Global Positioning System (GPS) Technology
•
Digital Assistant Tools
•
QWERTY Keypad
•
Text (SMS), Picture (MMS), Email, and Instant (IM) Messaging
•
Built-in 1.3 Megapixel Digital Camera
•
Voice Dial
•
Music Player (MP3 — requires an optional Memory Card)
•
Memory Card Slot (microSD™ and microSDHC™ — up to 16 Gb)
Note:
The R380 phone supports the wireless headset, hands-free, A2DP,
phonebook access, file transfer, and object push profiles for
Bluetooth® wireless technology.
Front View of Your Phone
Features
1.
Earpiece
: Lets you
hear ringing and alert
tones, alarm tones,
and the other parties
to calls.
2.
Display
: Indicates the
status of your phone,
including numbers
dialed, feature and
function screens,
status icons, message
indicators and
contents, signal
strength, and so on.
3.
Navigation Key
: In
Menu mode, lets you scroll through the phone menu
options. From Standby mode, press the Navigation key Left
or Right to browse the icons in the Quick Launcher, or
press the Navigation key Up (for
Messages
).
Contact List
Understanding Your Phone 10
) or Down (for
Left Soft Key
4
5
6
7
8
9
10
11 1213 14 15 16
4.
navigate through
menus and
applications and to
select the choice
indicated at the
bottom left corner of
the Main LCD.
5.
Send Key
entering a phone
number to dial the
number. Press to
answer incoming
calls. Press in
Standby mode to
launch the Recent
Calls list.
6.
Speakerphone Key
mode. (For more information, refer to “Speakerphone
Mode” on page 24.)
7.
Voicemail Key
your Wireless Provider’s server.
11
: Used to
: Press after
: Places the phone in Speakerphone
: Press and hold to dial your voice mailbox on
8.
Shift Key
: Toggles capitalization for text input between
mixed case (Abc), uppercase (ABC), and lowercase (abc).
Capitalization remains as selected until you press the Shift
key again.
9.
Fn Key
: Toggles the text input mode to let you use the
QWERTY keypad to enter numbers and symbols as well as
letters.
10.
Sym/Lock Key
: When entering text, press to launch a
Symbols screen for selecting symbols. From Standby
mode, press and hold this key to lock the keypad.
11.
Voice SVC Key
: From Standby mode, press and hold to
launch Voice SVC (Service). (For more information, refer to
“Voice SVC” on page 83.)
12.
Space/Vibrate Mode Key
: Lets you enter spaces between
words and characters. In Standby mode, press and hold to
activate Vibrate mode.
13.
Calendar Key
: Launches you phone’s Calendar tool. (For
more information, refer to “Calendar” on page 83.)
14.
Messaging Key
15.
Microphone
: Launches the
Messages
menu.
: Lets the other caller hear you clearly when
you are speaking to them.
16.
Enter Key
: Press to accept a text entry or to enter spaces
between lines of text.
Del Key
17
18
19
20
21
17.
: In text
entry mode,
deletes
characters from
the display.
18.
BACK Key
: In text
entry mode,
deletes
characters from
the display. In
menu mode,
returns you to the
previous menu or
screen.
19.
End Key
: Ends a
call. Returns you
to the Home screen. If you press and hold the END key, the
power goes On or Off. When you receive an incoming call,
press to send the call to Voicemail.
20.
Right Soft Key
applications and to select the choice indicated at the
bottom right corner of the Main Display.
: Used to navigate through menus and
21.
OK Key
: When navigating through a menu, accepts the
highlighted choice in a menu. When selecting settings in
an option screen, displays a list of available settings.
Understanding Your Phone 12
Side Views of Your Phone
1
2
3
4
Features
1.
Volume Key
: In Standby mode, lets you adjust the System
Volume. When receiving a call, lets you temporarily mute
the ringer.
2.
microSD (Memory Card) Slot
: Lets you install and remove
optional microSD Memory Card for additional image/photo
storage and for music storage.
3.
Camera Key
: From Standby mode, lights the front display
backlight and launches the Camera feature of your phone.
In Camera mode, takes pictures.
4.
Headset Connector
: Used to connect an optional headset
(for hands-free operation and/or music playback) or an
optional TTY device.
13
Rear View of Your Phone
1
2
3
Features
1.
Camera Lens
2.
Battery Cover
: The lens of your built-in camera.
: Secures and protects the battery and the
optional microSD memory card.
3.
Speaker
: Reproduces music and other sounds played by
your phone.
Command Keys
Soft Keys
Functions for the soft keys are indicated by labels that appear in
the display above each soft key. There are two soft keys, Left
() and Right ().
Left Soft Key
Some functions of the Left soft key () are as follows:
•
In Standby mode, press the
Menu
soft key () to open the Main
Menu.
•
In text input fields, press the Left soft key () to select the text input
method.
Right Soft Key
Some functions of the Right soft key () are as follows:
•
In Standby mode, press the
Contacts
Find
screen.
•
When the Right soft key function is Options, press the
Contacts
soft key () to launch the
Options
soft key
() and a pop-up menu of available Options appears.
Understanding Your Phone 14
OK Key
•
In Standby mode with
to launch the Applications (
highlighted Application in the
information, refer to
•
In Standby mode with
Shortcut Icon
“Shortcut Icon”
Shortcut Icon
set to On, press the OK key ()
APP
) shortcut menu and/or to launch the
APP
shortcut menu. (For more
on page 87.)
set to
Off
, press the
MENU
() to lauch the Main Menu
•
In a menu, press to accept the highlighted selection.
•
In camera mode, press to take a photo. (For more information,
refer to
“Camera”
on page 69.)
•
In a list, press the OK key () to view, select, launch, or play a
highlighted item.
Send Key
The
Send
key () is used to answer calls, dial calls, and to
recall the last number(s) dialed, received, or missed.
•
When receiving a call, press once to answer the call.
•
In Standby mode, enter a number and press to make a call.
•
In Standby mode, press to display the
All Calls
list of calls to and
from your phone.
•
Press twice In Standby mode to call the most recent number.
•
With two active calls, press to pick up a waiting call. Press
again to switch back to the original call.
15
key
BACK Key
The
BACK
key () is used to return to a previous menu or
screen. In some screens, you can also use the key to erase or
clear numbers, text, or symbols from the display.
•
To back up one menu level, briefly press .
•
To back up to Standby mode, press and hold .
Del Key
The
Del
key ( ) is used to erase or clear numbers, text, or
symbols from the display.
•
If you enter an incorrect character, briefly press to backspace (and
delete) the character.
•
To erase the entire sentence, press and hold .
End Key
•
Press and hold the
•
Briefly press once to disconnect a call.
•
Press to return to Standby mode from any menu, or to cancel the
End
key () to turn your phone on or off.
last input.
Navigation Key
Use the directional keys on the Navigation key () to
browse menus, sub-menus, and lists. (For more information,
refer to “Navigation Key Shortcuts” on page 20.)
Camera Key
To activate the camera built into your phone, in Standby mode,
press and hold the Camera key () — located on the right
side of your phone.
In Camera mode, pressing the Camera key () takes a
picture.
Note:
For more information, refer to “Camera” on page 69.
Fn Key
•
While in Input Mode, the Fn (Function) key () lets you toggle text
input modes between
•
While in Standby mode, press and hold the Fn (Function) key () to
Abc
and
123/Sym
.
activate/deactivate Vibrate Mode.
Entering Text
Your phone has a QWERTY ( ) keypad to
support quick and easy text input. You can enter text as you
would when using a computer keyboard.
The keys are labeled with a letter on the lower half and a number
or symbol on the upper half. Press the key corresponding to the
character you want to enter.
In addition, you can use the following special function keys:
Press to delete characters.
Tip:
You can also delete a character by pressing .
Press to start a new line.
Press once to enter a single upper case letter.
Press twice to select CAPS LOCK.
Press once more to remove CAPS LOCK.
Understanding Your Phone 16
Press to pop-up the first of three pages of symbols in
1
2
3
5
6
4
which you can select desired symbols.
Press once to enter 123/Sym mode for a single
character.
Press twice to toggle from Abc mode to 123/Sym mode.
Understanding the Display Screen
Your phone’s idle screen contains differing elements, depending
upon whether you enable or disable the Shortcuts menu. (For
more information, refer to “Shortcut Icon” on page 87.)
With Shortcuts Menu
Press once more to return to Abc (abc) mode.
Press to insert a space in a text entry.
1. The top line of your phone’s display contains icons that
indicate network status, battery power, signal strength,
and more. (For more information, refer to “Display Screen Icons” on page 19.)
2. The second line contains the Clock display (showing the
day, date, and time).
3. The central portion of the display shows information such
as menus, call progress information, messages, and
photos.
17
The third line from the bottom of the display contains
1
5
2
3
4
4.
additional feature status icons, such as the Automatic
Answer icon shown, and the Banner, which displays text
you enter in the Display Settings.
5. The Shortcuts menu provides easy access to popular
applications. Use the Left and Right Navigation keys to
highlight an application, then press the OK key to launch it.
6. The bottom line of the display shows current soft key
functions. The sample screen shows that pressing the Left
(
Menu
) soft key will display the Main Menu, pressing the
OK
center key will launch the highlighted application in the
Shortcuts menu, and pressing the Right (
will show the
Contact List
screen.
Contacts
) soft key
Without Shortcuts Menu
1. The top line of your phone’s display contains icons that
indicate network status, battery power, signal strength,
and more. (For more information, refer to “Display Screen Icons” on page 19.)
2. The second line contains the Clock display (showing the
day, date, and time).
3. The central portion of the display shows information such
as menus, call progress information, messages, and
photos.
4. The third line from the bottom of the display contains
additional feature status icons, such as the Automatic
Answer icon shown, and the Banner, which displays text
you enter in the Display Settings.
Understanding Your Phone 18
The bottom line of the display shows current soft key
5.
functions. The sample screen shows that pressing the Left
(
Menu
) soft key will display the Main Menu, pressing the
APP
center key will display the Shortcuts menu, and
pressing the Right (
List
screen.
Contacts
) soft key will show the
Contact
Display Screen Icons
Your phone can show you definitions of the icons that appear on
the top line of the display.
To access the Icon Glossary:
䊳
In Standby mode, press
Phone Info
➔
Menu
Icon Glossary
, then select
Settings
➔
. A list appears showing the
icons that can appear on the top line of the displays.
19
Dialogue Boxes
Dialogue boxes prompt for action, inform you of status, or warn
of situations such as low battery. Dialogue boxes and their
definitions are outlined below.
•
Choice
–
Example:
“Save Message?”
•
Reconfirm
–
Example:
“Erase All Messages?”
•
Performing
–
Example:
“Sending...” “Connecting...”
•
Completed
–
Example:
“Message Saved”
•
Information
–
Example:
“New Message”
•
Error
–
Example:
“System Error!”
•
Warning
–
Example:
“Low Battery,” “Memory Full!”
Backlights
Backlights illuminate the display and the keypad. When you press
any key or open the phone, the backlights come on. They go off
when no keys are pressed within a period of time set in the
Backlight menu.
Note:
During a phone call, the display backlight dims and turns off after 10
seconds to conserve battery power, regardless of the Backlight setting.
(For more information, refer to “Backlight” on page 86.)
Menu Navigation
Access the menus and submenus in your phone using
the Navigation key ()
and soft keys ( or ),
or use a shortcut.
1. In Standby mode,
press the
Menu
soft
key. The Main Menu (the first of several menus) appears in
the display.
2. Use the Navigation key to browse through the menus.
3. Press
OK
to enter the menu or sub-menu that appears in
the display.
4. Press Back or to return to the previous menu.
Return to the Previous Menu
•
Press
Back
/
Cancel
.
•
When
Back
/
Cancel
does not appear in the display,
press
Using Menu Shortcuts
Use menu shortcuts to quickly access menus and sub-menus.
From a numbered menu, press the number to the left of the
menu label to jump to the desired menu, sub-menu, or feature.
Example:
To jump to the
Sent
(for Messaging) and for Sent.
message folder, press
Menu
, then press
Navigation Key Shortcuts
In Standby mode, you can quickly access sub-menus or phone
functions, and launch applications, by pressing the Navigation
key.
You can select which shortcuts are available on the Navigation
key. (For more information, refer to “Set Shortcuts” on page 87.)
Understanding Your Phone 20
.
With Shortcuts Menu
Contact List
Messaging
Highlight Previous
Shortcut
Highlight Next
Shortcut
Contact List
Messaging
MetroWEB@metro
In Standby mode, press the Navigation key Up or Down to launch
the corresponding applications in the pattern shown here.
Press the Navigation key Left or Right to launch the Shortcuts
menu and/or highlight an icon in the Shortcuts menu.
Without Shortcuts Menu
In Standby mode, press the Navigation key Up or Down, Left or
Right to launch the corresponding applications in the pattern
shown here.
Using Shortcut Icons
You can also launch popular
applications by using the
Shortcut menu icons, and
without the menu-based drill
down.
1. In Standby mode, with
the Shortcuts menu
present in the display, highlight the desired shortcut icon
by pressing the Navigation key Left or Right. The name of
the Shortcut icon appears above it.
2. Press
OK
to launch the related application.
Available Shortcut Icons
mail@metro
: Access your personal and business
Email accounts.
Metro411
: Access Metro411 Directory Assistance
service.
Metro Web
: Surf the web and download ringtones and
wallpapers.
21
@metro
: Download full featured applications over the
air including games, personalized ring tones,
pictures, and more. Send and receive instant
messages and email, or browse the web to catch up
on all the latest news.
MetroNavigator
: Locate places, get directions to any
destination, and get a map of any location.
Pocket Express
: View all of your most wanted
information on your phone: news, sports, weather,
maps, and more.
Loopt
: Locate friends on a map, using GPS
technology.
myMetro
: Manage your Wireless Provider account.
MetroBACKUP
: Automatically backup, restore, and
manage your Contacts information on your Wireless
Provider’s server.
IM and Social
: Exchange Instant Messages and Social
networking site messages.
Your Phone’s Modes
Standby mode
Standby mode is the state the phone enters once it has found
service and is idle. The phone goes into Standby mode:
•
After you power the phone on.
•
When you press after a call or from within a menu.
In Standby mode, you can use features of your Standby mode
screen (For more information, refer to “Understanding the Display Screen” on page 17). To access other phone modes or use
command keys to do the following:
Place Calls
1. In Standby mode, enter a phone number, and press to
place a call.
2. Press to return to Standby mode.
Receive Messages
You can receive Text, Picture, or Instant messages or E-mail
while in Standby mode. An alert tone sounds and a notification
message appears in the display when a new message arrives.
Understanding Your Phone 22
Adjust the Master Volume
From Standby mode, you
can adjust the Master
Volume for your phone by
pressing the Volume key
(on the left side of the
phone) Up or Down. The
Master Volume controls the
volume of all sounds
played by your phone, such
as ringers, alerts, alarms, and multimedia files.
1. From Standby mode, press the Volume key Up or Down to
set the Master Volume as desired.
2. When you are satisfied with the setting, press
SET
Your phone returns to Standby mode.
Call Answer Mode
You can choose to answer a call by pressing any key except ,
, or or by pressing only . (For more
information, refer to “Call Settings” on page 90.)
23
Talk Mode
You can place and receive calls only when your phone is on.
While in a call, your phone is in talk mode and you have the
following options available:
•
You can conduct the call by launching Speakerphone mode. (For more
information, refer to
•
To mute your phone’s microphone, press
•
For a menu of additional options, press
information, refer to
“Speakerphone Mode”
Mute
Options
“In-Call Options Menu”
on page 24.)
.
. (For more
on page 32.)
Enter/Exit Vibrate Mode
Silences the tones your keypad makes when you press a key and
replaces all ringers with vibration. (For more information, refer to
.
“Adjust the Master Volume” on page 23.)
Note:
In Standby Mode, you can also press and hold the Space key () to
enter/exit Vibrate Mode.
To enter Vibrate Mode:
䊳
In Standby mode, press the Volume key Down until the
Master Volume
screen shows
Vibrate Only
. The phone
vibrates and the Vibrate Mode icon () appears in the
display.
To exit Vibrate Mode:
䊳
While in Vibrate mode and Standby mode, press the
Volume key Up until the
setting other than
Master Volume
Vibrate Only
screen shows a
. The Vibrate Mode icon
() disappears from the display.
Speakerphone Mode
Speakerphone mode lets you use your phone hands-free and/or
share calls with others.
•
Entering Speakerphone Mode
: In Standby mode or during a call,
press and hold .
•
Exiting Speakerphone Mode
: In Standby mode or during a call, press
and hold or, end the call.
Hands-free Mode
Hands-free mode lets you operate your phone remotely, without
touching it other than to turn it on or off.
䊳
To place your phone in Hands-free mode, do one of the
following:
•
Connect an optional wired headset.
– or –
•
Pair and connect an optional Bluetooth technology headset or
hands-free car kit. (For more information, refer to
Device”
on page 82.)
“Add New
Camera Mode
Camera mode lets you take pictures with your phone’s camera.
In Camera mode, you can also adjust the resolution and
appearance of your pictures. (For more information, refer to
“Camera” on page 69.)
•
Entering Camera Mode
key () — on the right side of the phone — then select
•
Exiting Camera Mode
Note:
You can also enter Camera mode while in Standby mode, by selecting
Menu
➔
Multimedia
: In Standby mode, press and hold the Camera
Camera
: Press .
➔
Camera
.
Input Mode
Input mode determines how you enter text, numbers, and
symbols. Optional text input modes are
T9WORD, abc, Abc, ABC, 123/Sym
T9word, T9Word
, and
Symbols
,
. While at any text
entry screen, press the left soft key ( ), , or to toggle
between the optional modes. (For more information, refer to
“Entering Text” on page 16.)
Tip:
You can toggle between
T9word, T9Word
You can toggle between
, and
abc, Abc
and
T9WORD
Abc
ABC
entry modes by pressing .
and
123/Sym
Understanding Your Phone 24
entry modes or between
entry modes by pressing .
.
Lock Mode
Your phone has two lock modes: Keypad Lock mode and Phone
Lock mode.
•
In Keypad Lock mode, most of your phone’s keys are disabled. This
lets you carry your phone in a pocket or bag with no risk of accidental
dialing.
•
In Phone Lock mode, restrictions are placed on phone use. You can
receive calls and messages, but cannot place outgoing calls (except
for emergency numbers) until you unlock the phone. Phone Lock mode
also restricts access to menus and the Volume key. You enable Phone
Lock mode by setting your phone to lock automatically when you
power it on. (For more information, refer to
“Phone Lock Setting”
page 88.)
Locking Your Phone’s Keypad
䊳
In Standby mode, press and hold .
Unlocking the Keypad
䊳
In Lock mode, press the right soft key (
Unlock
), then press
.
Unlocking Phone Lock
䊳
In Standby mode, press the right soft key (
Unlock
), then
enter the lock code when prompted. (For more information,
refer to “Phone Lock Setting” on page 88.)
25
on
Section 3: Call Functions
This section provides procedures for making and answering
calls. This section also describes features, such as call logs and
call timers, that help you make calls and manage your call time.
Making a Call
1. With the phone on, enter the number you wish to call using
the keypad.
2. Press to place the call.
Three-way Calling
Call two other numbers and connect them to your call using
three-way calling.
1. In Standby mode, enter the number for the first party in
your call, then press .
2. When connected, ask the other party to remain on the line.
Press to place them on hold.
3. Enter the second party’s phone number and press .
4. When the second party answers, press to connect all
three parties.
Manual Pause Calling
To manually call a number with pause(s) without storing it in your
Contacts list:
1. In Standby mode, enter the number you wish to call.
2. Press
Options
. The following pause options appear in the
display:
• Add 2-Sec Pause
•
Add Wait
3. Select the desired pause to enter it into the number
: A 2-second pause after which dialing resumes.
: A hard pause (waits for input from you).
sequence.
4. Press to call the number.
Tip:
Press Save to store pauses along with the number if you plan to call the
number frequently.
Call Functions 26
Speed Dialing
Speed Dialing lets you place a call to any Contact stored in your
Contacts list by dialing the Contact’s Location number.
1-Touch Dialing
Use 1-touch dialing to speed dial Contacts from 1 (Voicemail)
through 9.
䊳
In Standby mode, press and hold the number key
corresponding to the desired Contact’s speed dial number.
Example:
To speed dial the Contact assigned speed dial 5, press and hold
.
2-Touch Dialing
Use 2-touch dialing to speed dial Contacts from 10 through 99.
1. In Standby mode, press and release the number key
representing the first digit of the desired Contact’s speed
dial number.
2. Press and hold the number key representing the second
digit of the desired Contact’s speed dial number.
Example:
To speed dial the Contact assigned speed dial 35, press then
press and hold .
27
3-Touch Dialing
Use 3-touch dialing to speed dial Contacts from 100 through 999.
1. In Standby mode, press and release the number key
representing the first digit of the desired Contact’s speed
dial number.
2. Press the number key representing the second digit of the
desired Contact’s speed dial number.
3. Press and hold the number key representing the third digit
of the desired Contact’s speed dial number.
Example:
To speed dial the Contacts entry assigned to speed dial 325, press
, press , then press and hold .
Loading...
+ 98 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.