All Intellectual Property, as defined below, owned by or which is otherwise the
property of Samsung or its respective suppliers relating to the SAMSUNG Phone,
including but not limited to, accessories, parts, or software relating there to (the
“Phone System”), is proprietary to Samsung and protected under federal laws, state
laws, and international treaty provisions. Intellectual Property includes, but is not
limited to, inventions (patentable or unpatentable), patents, trade secrets,
copyrights, software, computer programs, and related documentation and other
works of authorship. You may not infringe or otherwise violate the rights secured by
the Intellectual Property. Moreover, you agree that you will not (and will not attempt
to) modify, prepare derivative works of, reverse engineer, decompile, disassemble,
or otherwise attempt to create source code from the software. No title to or
ownership in the Intellectual Property is transferred to you. All applicable rights of
the Intellectual Property shall remain with SAMSUNG and its suppliers.
Do you have questions about your Samsung Mobile Phone?
For 24 hour information and assistance, we offer a new FAQ/ARS System
(Automated Response System) at:
www.samsungtelecom.com/support
http://www.samsungusa.com
TracFone_R355CNet10_CK06_MM_122309_F6
GH68-25543A
Printed in China
Nuance®, VSuite™, and the Nuance logo are trademarks or registered trademarks
of Nuance Communications, Inc. or its affiliates in the United States and/or other
countries.
Openwave® is a registered Trademark of Openwave, Inc.
The Bluetooth® word mark, figure mark (stylized “B Design”), and combination
mark (Bluetooth word mark and “B Design”) are registered trademarks and are
wholly owned by the Bluetooth SIG.
microSD™ and the microSD logo are Trademarks of the SD Card Association.
Open Source Software
Some software components of this product incorporate source code covered under
GNU General Public License (GPL), GNU Lesser General Public License (LGPL),
OpenSSL License, BSD License and other open source licenses. To obtain the
source code covered under the open source licenses, please visit:
http://www.samsungnetwork.com/Home/opensource
SAR Information
Your wireless phone is a radio transmitter and receiver. It is designed and
manufactured not to exceed the emission limits for exposure to radio frequency (RF)
energy set by the Federal Communications Commission (FCC) of the U.S.
Government. These limits are part of comprehensive guidelines and establish
permitted levels of RF energy for the general population. The guidelines are based
on the safety standards that were developed by independent scientific organizations
through periodic evaluation of scientific studies.
The standards include a substantial safety margin designed to assure the safety of
all persons, regardless of age and health.
.
The exposure standard for wireless phones employs a unit of measurement known
as Specific Absorption Rate (SAR). The SAR limit set by the FCC is 1.6 W/kg.
The highest SAR values for this model phone were Head: 1.04 W/kg, and
Body: 0.45 W/kg.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE
WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE
PRODUCT “AS IS”, AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF
ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT
LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE
PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE
PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE
PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY
OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION,
SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH
OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
TracFone_R355CNet10_CK06_MM_122309_F6
Table of Contents
Section 1: Getting Started .....................................................4
This section explains how to start using your phone by activating your service and
setting up your Voicemail, and explains how this manual is put together.
Notes and Tips
Throughout this manual some text is set apart from the rest. In this way, important
information, quick methods for activating features, to define terms, and more are
emphasized. The definitions for these methods are as follows:
•
Notes
— Explain alternative options within the current feature, menu, or submenu.
•
Tips
— Provide quick or innovative methods for performing functions related to the subject
at hand.
•
Important
— Points out important information about the current feature that could affect
performance, or even damage your phone.
Text Conventions
This manual provides condensed information about how to use your phone. To
make this possible, the following terms and icon appear in place of repeatedly-used
procedural steps:
highlight
select
➔ Used in place of “select” in long “drill down” procedure steps.
Use the Navigation key () to move a highlighting effect onto a menu
item or screen item of interest. Press the outer ring up, down, left, or right.
After highlighting a menu item or screen item, press the middle of the
key to launch, access, or save a highlighted menu item or screen field of
interest.
Example:
“...
Settings
➔
Call Settings
➔
Call Answer
...”
4
Installing the Battery
Your phone comes packaged with a partially charged rechargeable standard Li-Ion
battery and travel adapter.
Important!:
You must fully charge the battery the first time you use your phone. Otherwise you
could damage the battery.
1. Insert the top end of the battery (1), matching the gold contacts on the top of
the battery to those inside the phone battery compartment.
2. Lightly press the bottom end of the battery down into the phone (2) until it
slips into place.
3. Place the battery cover over the battery (1) and press lightly upward (2) until it
clicks into place.
Getting Started 5
Removing the Battery
1. If your phone is turned on, press and hold to turn it off.
2. Press down on the directional arrow at the bottom end of the battery cover
and slide the cover toward the bottom end of the phone (1).
3. Lift the cover up and away from the phone, bottom end first (2).
4. Lift the bottom of the battery up (3) and away from the phone (4).
Charging the Battery
Your phone is powered by a rechargeable standard Li-Ion battery. Only use
Samsung-approved charging devices and batteries. Samsung accessories are
designed to maximize battery life. Use of other accessories may invalidate your
warranty and may cause damage.
6
Using the Travel Adapter
The travel adapter included with your phone is a convenient, light-weight charger
that rapidly charges your phone from any 120/220 VAC outlet.
1. Plug the large end of the Travel Adapter into a standard 120 VAC or 220 VAC
wall outlet.
Important!:
For connection to an electrical supply not located in North America, you must use an
adaptor of the proper configuration for the power outlet. Use of the wrong adapter
could damage your phone and void your warranty.
2. Insert the smaller end of the Travel Adapter into the charger/accessory
connector on the right side of your phone.
Warning!:
If your handset has a touch screen display, please note that a touch screen responds
best to a light touch from the pad of your finger or a non-metallic stylus. Using excessive
force or a metallic object when pressing on the touch screen may damage the tempered
glass surface and void the warranty.
Important!:
You must unplug the adapter before removing the battery from the phone during
charging to avoid damage.
Getting Started 7
Low Battery Indicator
The battery indicator () in the upper-right corner of the display indicates
power level. Monitor the battery strength and ensure your battery is adequately
charged.
•
Five bars () indicate a full charge.
•
An empty battery icon () indicates a near empty battery.
•
A blinking empty battery icon () and a tone sounding indicate you have two to three
minutes before the battery is too low to operate the phone.
If you continue to use your phone without charging its battery, the phone will shut
down.
Activating Your Phone
Contact your Wireless Carrier and follow their instructions for obtaining service, if
necessary. We suggest that you read this guide to fully understand the services your
phone supports.
Turning Your Phone On
1. Press .
2. The phone begins searching for a network signal.
3. Once the phone finds a signal, the time, date, and day appear at the top of
the display.
4. You’re now ready to place and receive calls.
Note:
If you are outside of your carrier’s coverage or roaming area (), the No Service icon
( ) appears at the top of the display. If you cannot place or receive calls, try later when
service is available, or at another location.
8
Turning Your Phone Off
䊳
Press and hold for two or more seconds. Your phone powers off.
Note:
If your phone is on and you press for less than one second, the phone will not power
off. This prevents your phone from being turned off accidentally.
Setting Up Your Voicemail
Voicemail allows callers to leave voice messages that can be retrieved any time.
Note:
Once your Voicemail account has been set up, you can use the Voicemail folder (under the
Messages menu) to view details of voice messages in your Voicemail box.
1. In standby mode, press and hold or dial your own mobile number to dial
Voicemail.
2. Follow the prompts in the new user tutorial to setup your mail box.
Listen to Voicemail
䊳
In standby mode, press and hold or dial your own mobile number to dial
Voicemail. After connecting, you will hear your voice greeting. You are prompted
to enter your password.
Memory Card
Your phone has a Memory Card slot located under the back cover. You can install a
microSD™ card to provide additional memory for storing files. A Memory Card is
required to operate your Music Player.
Getting Started 9
Install a Memory Card
1. Open the back cover of your phone.
2. Insert the memory card — contact side facing down and smaller end pointing
toward the phone — into the memory card slot.
3. Press the memory card into the slot until the card locks into place.
4. Replace the back cover.
Remove a Memory Card
1. Open the back cover of your phone.
2. Press the memory card inward until the card lock releases.
3. Remove the memory card from the memory card slot.
4. Replace the back cover.
10
Section 2: Understanding Your Phone
This section outlines some key features of your phone. It also describes the screen
format and the icons that will be displayed when the phone is in use.
Features of Your Phone
•
Domestic and international voice and text messaging service (available on participating
networks).
•
High speed data (CDMA 2000 1x Technology)
•
Bluetooth® Wireless Technology (see Note)
•
Digital Assistant Tools
•
QWERTY Keypad
•
Picture (MMS) Messaging
•
Text (SMS) Messaging
•
Built-in 1.3 Megapixel Digital Camera
•
Voice Dial
•
Music Player (MP3 — requires an optional Memory Card)
•
Memory Card Slot (microSD™ — up to 16 GB)
Note:
Your phone supports the wireless headset, hands-free, dial-up networking, A2DP, Phonebook
Access, serial port, file transfer profiles for Bluetooth
not support all Bluetooth OBEX profiles.
®
wireless technology. Your phone does
Understanding Your Phone 11
Side View of Your Phone
1
2
3
Features
1.
Volume Key
— In standby mode, lets you adjust the incoming call ringer
volume. When receiving a call, lets you temporarily mute the ringer.
2.
Power
/
Accessory Connector
— Used to connect charging accessories or
optional accessory cables to your phone.
3.
Camera Key
— In Camera mode, takes pictures.
12
Front View of Your Phone
2
5
4
7
3
1
16
15
11
14
6
18
17
20
8
9
101912
13
Features
1.
Main Display
— Indicates the status of your phone, including numbers dialed,
feature and function screens, status icons, message indicators and contents,
signal strength, and so on.
2.
Left Soft Key
— Used to access the Main menu from the Idle screen and to
navigate through menus and applications. Press the Left soft key to select the
function indicated at the bottom left corner of the Main LCD.
3.
Speakerphone Key
4.
Talk Key
— Lets you place or receive a call. In standby mode, press the key
once to access the recent calls log.
5.
QWERTY Keypad
6.
Fn Key
— Toggles the text input mode to let you use the QWERTY keypad to
enter numbers and symbols as well as letters.
— Press and hold to turn Speakerphone mode On and Off.
— Use these keys to enter numbers, letters, and symbols.
Understanding Your Phone 13
7.
Shift Key
— Toggles capitalization for text input between mixed case (Abc),
uppercase (ABC), and lowercase (abc). Capitalization remains as selected
until you press the Shift key again.
8.
Sym Key
— In text entry mode, press to pop-up the first of three pages of
symbols. Select a symbol by pressing the associated number key.
9.
Microphone
— Lets the other caller hear you clearly when you are speaking
to them.
10.
Space Key
— In text entry mode, lets you enter spaces between words and
characters. In standby mode, allows you to Lock or Unlock your keypad.
11.
Calendar Key
— Lets you view the current, past, or future month in a monthly
calendar layout.
12.
Voice Command Key
13.
Enter Key
— Press and hold this key to activate Voice Commands.
— Press to accept a text entry or to enter spaces between lines of
text.
14.
Backspace Key
15.
END Key
— In text entry mode, deletes characters from the display.
— Ends a call. If you press and hold the END key, the power goes On
or Off. When you receive an incoming call, press to send the call to voicemail.
16.
BACK Key
— In text entry mode, deletes characters from the display. In menu
mode, returns you to the previous menu or screen.
17.
Right Soft Key
— Used to access the Browser from the Idle screen and to
navigate through menus and applications. Press the Right soft key to select
the function indicated at the bottom right corner of the Main LCD.
18.
OK Key
— When navigating through a menu, accepts the highlighted choice
in a menu.
14
Navigation Key
2
4
3
1
19.
— In Menu mode, lets you scroll through the phone menu
options. In Standby mode, lets you access preset functions and one user-
defined function.
20.
Earpiece
— Lets you hear ringing and alert tones, alarm tones, and the other
parties to calls.
Back View of Your Phone
Features
1.
Headset Connector
— Used to connect an optional headset (for hands free
operation and/or music playback) or an optional TTY device.
2.
Speaker
— Allows you to hear music.
3.
Camera Lens
4.
Mirror
— The lens of your built-in camera.
— Allows you to see yourself when taking pictures.
Command Keys
Soft Keys
Functions for the soft keys are indicated by labels that appear in the display above
each soft key. There are two soft keys, Left () and Right ().
mode, press the
Right () soft
Left () soft
key to launch the
key to launch the
Browser
.
Menu.
In standby mode, press the
In standby
OK Key
•
In a menu, press to accept the highlighted selection.
•
In camera mode, press to take a photo or to create a Picture message.
Understanding Your Phone 15
•
When the OK key function is EDIT, press the
EDIT
key () to edit a
Draft message.
Tal k Key
The
Tal k
key () is used to answer calls, dial calls, and to recall the last
number(s) dialed, received, or missed.
•
Press once to answer calls.
•
Enter a number and briefly press to make a call.
•
Briefly press in standby mode to display a list of recent calls to and from
your phone.
•
Press twice in standby mode to call the most recent number.
•
Press to pick up a waiting call. Press again to switch back to the
other call.
BACK Key
The
BACK
key () is used to erase or clear numbers, text, or symbols from the
display. You can also use the key to return to a previous menu or to return to
standby mode from any menu.
•
If you enter an incorrect character, briefly press to backspace (and delete) the
character.
•
To erase the entire sentence, press and hold .
•
To back up one menu level, briefly press .
End Key
•
Press and hold the
•
Briefly press once to disconnect a call.
•
Press to return to standby mode from any menu, or to cancel the last input.
End
key () to turn your phone on or off.
Navigation Key
Use the directional keys on the Navigation key () to browse menus, submenus,
and lists. Each directional key also acts as a shortcut to launch applications. For
more information, refer to “Navigation Key Shortcuts” on page 27.
16
Camera Key
In standby mode, press and hold the Camera key () located on the right side
of your phone, to activate the camera. In camera mode, pressing the Camera key
() takes a picture.
Entering Text
Your phone has a QWERTY ( ) keypad to support quick and
easy text input. You can enter text as you would when using a computer keyboard.
The keys are labeled with a letter on the upper half and a number or symbol on the
lower half. Press the key corresponding to the character you wish to enter.
In addition, you can use the following special function keys:
Press to delete characters.
Tip:
You can also delete a character by pressing .
Press to start a new line.
Press once to enter a single upper case letter.
In Abc mode, press once to select CAPS LOCK.
Press once more to remove CAPS LOCK.
Press to pop-up the first of three pages of symbols. Select
a symbol by pressing the associated number key.
Press to toggle entry mode between Abc and 123/Sym.
Press to insert a space in a text entry.
Understanding Your Phone 17
Understanding the Display Screens
1
2
4
3
Main Display
1. The top line of your phone display contains icons that indicate network
status, battery power, signal strength, and more. For more information, refer
to “Display Screen Icons” on page 18.
2. The next line contains the date and the time.
3. The center portion of the display shows information such as call progress
information, messages, and photos.
4. The bottom line of the display shows current soft key functions. The Left
(
Menu
) soft key displays the Main
key launches the
Browser
Menu
and pressing the Right (
Browser
.
Display Screen Icons
Your phone can show you definitions of the icons that appear on the top line of the
displays.
To access the Icon Glossary:
䊳
In standby mode, press
appears showing the icons that can appear on the top line of the displays.
Menu
➔
Settings
➔
Phone Info
➔
Icon Glossary
. A list
) soft
18
Section 3: Call Functions
This section explains how to make and answer calls. This section also includes the
features and functionality associated with making or answering calls.
Making a Call — Number Entry Dialing
1. With the phone on, enter the number you wish to call using the keypad.
2. Press to place the call.
Dialing Emergency Numbers
To place an emergency call:
1. With the phone on, enter 911 using the keypad.
2. Press to place the call.
You can specify other numbers as emergency numbers using the Emergency #
settings.
Important!:
Emergency number 911 is preset into your phone. You can dial this number almost any
time, even when the phone is locked or restricted.
If you call 911 an audible tone is heard and an Emergency prompt appears in the
display for the duration of the call.
Important!:
Because of various transmission methods, network parameters, and user settings
necessary to complete a call from your wireless phone, a connection cannot always be
guaranteed. Therefore, emergency calling may not be available on all wireless
networks at all times.
Important!:
DO NOT depend on this phone as a primary method of calling 911 or for any other
essential or emergency communications.
Call Functions 19
Dialing International Numbers
Call Another Country — Manual Method
1. In standby mode, enter
2. Enter the country code for the country that you are calling (for example,
011
(the three-digit exit code for the United States).
82
South Korea).
3. Enter the number that you wish to call, then press .
Note:
Puerto Rico and Canada are on the North American dialing plan. Making calls to Puerto Rico
and Canada is similar to making calls within the United States, no unique country codes are
necessary.
Manual Pause Calling
When you call automated systems (like banking services), you are often required to
enter a password or account number. Instead of manually entering the numbers
each time, you can store the numbers in your Contacts along with special
characters called pauses.
To manually call a number with pause(s) without storing it to your Contacts:
1. Enter the number you wish to call.
2. Press the Options soft key. A pop-up menu containing the following options
appears in the display:
•
2-Sec Pause
— A two-second pause stops the calling sequence for two seconds and
then automatically sends the remaining digits. P appears in the display.
•
Wait
— A hard pause stops the calling sequence until you press . W appears in
the display.
3. Highlight the desired pause option.
4. To enter the highlighted pause into your number sequence, press .
5. Press to call the number.
for
20
Loading...
+ 54 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.