Samsung Byline SCH-R310, Byline, SCH-R310 User Manual

Download

Page 1

Samsung Byline™

(SCH-R310 Series)

PORTABLE TRI-BAND

MOBILE PHONE

User Manual

Please read this manual before operating your

phone, and keep it for future reference.

Page 2

R310.02_BJ11_CB_112508_F6

Intellectual Property

All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to Samsung and protected under federal laws, state laws, and international treaty provisions. Intellectual Property includes, but is not limited to, inventions (patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you agree that you will not (and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or otherwise attempt to create source code from the software. No title to or ownership in the Intellectual Property is transferred to you. All applicable rights of the Intellectual Property shall remain with SAMSUNG and its suppliers.

Samsung Telecommunications America (STA), LLC

Headquarters: Customer Care Center: 1301 E. Lookout Drive 1000 Klein St. Richardson, TX 75082 Plano, TX 75074 Toll Free Tel: 1.888.987.HELP (4357)

Internet Address: http://www.samsungusa.com

Do you have questions about your Samsung Mobile Phone? For 24 hour information and assistance, we offer a new FAQ/ARS System (Automated Response System) at:

www.samsungwireless.com/support

GH68-20776A

Page 3

Printed in Korea.

Licensed by Qualcomm Incorporated under one or more of the following patents: U.S. Patent No. 4, 901, 307; 5, 056, 109; 5, 099, 204; 5, 101, 501; 5, 103, 459; 5, 107, 225; 5, 109, 390.

T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat. 5,818,437; U.S. Pat. 5,953,541; U.S. Pat. 6,011,554 and other patents pending.

Nuance®, VSuite™ and the Nuance logo are trademarks or registered trademarks of Nuance Communications, Inc. or its affiliates in the United States and/or other countries.

Openwave® is a registered Trademark of Openwave, Inc. The Bluetooth® word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered

trademarks and are wholly owned by the Bluetooth SIG. Kodiak Networks®, Kodiak PTT Client, Kodiak Push To Talk, and Kodiak Networks Logo are trademarks or registered trademarks of Kodiak

Networks, Inc.

Disclaimer of Warranties; Exclusion of Liability

EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.

Page 4

Table of Contents

Section 1: Getting Started ............................................. 4

Understanding this User Manual . . . . . . . . . . . . . . . . . . . . . . . 4

Installing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Activating Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Section 2: Understanding Your Phone .......................... 8

Features of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Closed View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Open View (Front) of Your Phone . . . . . . . . . . . . . . . . . . . . . . . 9

Command Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Understanding the Display Screen . . . . . . . . . . . . . . . . . . . . . 12

Your Phone’s Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Section 3: Call Functions ............................................. 16

Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Calls Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Section 4: Menu Navigation ........................................ 26

Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Navigation Key Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Section 5: Entering Text .............................................. 27

Changing the Text Entry Mode . . . . . . . . . . . . . . . . . . . . . . . . 27

Using T9® Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Using Abc Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Entering Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Entering Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Section 6: Understanding Your Contacts .....................30

Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Finding a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Adding a New Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . .32

Editing a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Saving a Number After a Call . . . . . . . . . . . . . . . . . . . . . . . . . .36

Speed Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Contacts Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Deleting a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

ChatLINK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Metro411 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Memory Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Section 7: @Metro ........................................................ 44

Launching @Metro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Applications Shopping and Downloading (Mobile Shop) . . . . . .44

Changing Your @Metro Settings . . . . . . . . . . . . . . . . . . . . . . .44

Using On-line Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Section 8: Messages ....................................................47

Types of Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Create and Send Text Messages . . . . . . . . . . . . . . . . . . . . . . .47

Receive Text Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Message Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Page 5

Erase Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Message Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Section 9: MetroWEB ................................................... 56

MetroWEB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Launching MetroWEB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Using MetroWEB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Using Links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

How MetroWEB Keys Work . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Section 10: Voice SVC .................................................. 58

Voice SVC Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

Voice Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Voice Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

Section 11: My Contents .............................................. 63

My Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

My Ringtones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

My Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

Section 12: Tools .......................................................... 65

Accessing Your Phone’s Tools . . . . . . . . . . . . . . . . . . . . . . . . . 65

Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Memo Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70

World Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72

Stop Watch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

Tip Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Section 13: Settings ......................................................76

Accessing Your Phone’s Settings . . . . . . . . . . . . . . . . . . . . . . 76

Location Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Call Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Phone Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Memory Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Phone Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Section 14: Health and Safety Information ..................91

Health and Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . 91

Samsung Mobile Products and Recycling . . . . . . . . . . . . . . . . 92

UL Certified Travel Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Consumer Information on Wireless Phones . . . . . . . . . . . . . . . 93

Road Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Responsible Listening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

Using Your Phone Near Other Electronic Devices . . . . . . . . . 102

Potentially Explosive Environments . . . . . . . . . . . . . . . . . . . . 103

Emergency Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

FCC Notice and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

Other Important Safety Information . . . . . . . . . . . . . . . . . . . . 104

Product Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

Availability of Various Features/Ring Tones . . . . . . . . . . . . . . 106

Battery Standby and Talk Time . . . . . . . . . . . . . . . . . . . . . . . 106

Battery Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

Page 6

Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

Section 15: Warranty Information ............................. 109

Standard Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . 109

Index ............................................................................ 113

Page 7

Getting Started 4

Section 1: Getting Started

This section explains how to start using your Samsung Byline™ phone by activating your service, setting up your Voicemail, or getting an understanding of how this manual is put together.

Understanding this User Manual

The chapters of this guide generally follow the same order as the menus and sub-menus in your phone. A robust index for quick reference to most features begins on page 113.

Also included is important safety information that you should know before using your phone. Most of this information is near the back of the guide, beginning on page 91.

Notes and Tips

Throughout this guide there is text that is set apart from the rest. These are intended to point out important information, quick methods for activating features, to define terms, and more. The definitions for these methods are as follows:

•

Notes

— Explain alternative options within the current feature, menu,

or sub-menu.

•

Tips

— Provide quick or innovative methods for performing functions

related to the subject at hand.

•

Important

— Points out important information about the current

feature that could affect performance, or even damage your phone.

Text Conventions

This manual provides condensed information about how to use your phone. To make this possible, the following terms and icon appear in place of repeatedly-used procedural steps:

Installing the Battery

Note:

Your phone comes packaged with a partially charged rechargeable standard Li-Ion battery and travel adapter.

Important!:

You must fully charge the battery the first time you use your phone, otherwise you could damage the battery.

highlight

Use the Navigation key ( ) to move a highlighting effect onto a menu item or screen item of interest.

select

After “highlighting” a menu item or screen item, press the OK key to launch, access, or save a highlighted menu item or screen field of interest.

➔ Used in place of “select” in long “drill down”

procedure steps.

Example:

“...

Settings

➔

Call Settings

➔

Call Answer

...”

Page 8

Insert the top end of the battery first, matching the gold contacts on the inside of the battery to those on the phone.

2. Press lightly on the bottom end of the battery down into

the phone until it slips into place.

3. Press lightly down on the top of the battery cover.

4. Press lightly on the bottom end of the battery up over

the battery until it clicks into place.

Remove the Battery

1. Press and hold to turn off the phone (if on).

2. Press down on the battery cover (1) and slide the cover

toward the bottom end of the phone. Lift the cover (2) up and away from the phone, bottom end first.

3. Lift the battery up (1) and away (2) from the phone,

bottom end first.

Page 9

Getting Started 6

Charging the Battery

Your phone is powered by a rechargeable standard Li-Ion battery. Only use Samsung-approved charging devices and batteries. Samsung accessories are designed to maximize battery life. Use of other accessories may invalidate your warranty and may cause damage.

Use the Travel Adapter

The travel adapter included with your phone is a convenient, light-weight charger that rapidly charges your phone from any 120/220 VAC outlet.

1. Plug the large end of the Travel Adapter into a standard

120 VAC or 220 VAC wall outlet.

Important!:

For connection to an electrical supply not located in North America, you must use an adaptor of the proper configuration for the power outlet. Use of the wrong adapter could damage your phone and void your warranty.

2. Insert the smaller

end of the Travel Adapter into the charger/accessory connector on the right side of your phone.

Important!:

You must unplug the adapter before removing the battery from the phone during charging to avoid damage.

Low Battery Indicator

The battery indicator ( ) in the upper-right corner of the display indicates power level. Monitor the battery strength and ensure your battery is adequately charged.

Five bars ( ) indicate a full charge.

An empty battery icon ( ) indicates a near empty battery.

A blinking empty battery icon ( ) and a tone sounding indicate you have two to three minutes before the battery is too low to operate the phone.

If you continue to use your phone without charging its battery, the phone will shut down.

Correct

Incorrect

Page 10

Activating Your Phone

Contact your Wireless Carrier and follow their instructions for obtaining service, if necessary. We suggest that you read this guide to fully understand the services your phone supports.

Turning Your Phone On

䊳

Press and hold until the display lights.

Note:

As with any other radio-transmitting device, do not touch the antenna while using your phone as this can affect call quality and can cause the phone to operate at a higher power level than is necessary.

•

The phone begins searching for a network signal.

•

Once the phone finds a signal, the time, date, and day appear in the bottom of the display.

•

You’re now ready to place and receive calls.

Note:

If you are outside of your carrier’s coverage or roaming area, the No Service icon ( ) appears at the top of the phone’s display. If you cannot place or receive calls, try later when service is available, or at another location.

Turn Your Phone Off

䊳

Press and hold for two or more seconds. Your phone powers off.

Note:

If your phone is on and you press for less than one second, the phone will not power off. This prevents your phone from being turned off accidentally.

Setting Up Your Voicemail

Voicemail allows callers to leave voice messages, which can be retrieved any time.

Note:

Once your Voicemail account has been set up, you can use the Voicemail folder (under the Message menu) to view details of voice messages in your Voicemail box.

1. In standby mode, do one of the following:

Press and hold the key

-or-

Press and the key

-or-

Dial your own mobile number to dial Voicemail.

2. Follow the prompts in the new user tutorial to setup your

mail box.

Listen to Voicemail

䊳

In standby mode, press and hold the key or dial your own mobile number to dial Voicemail. After connecting, you will hear your voice greeting. You are prompted to enter your password.

Page 11

Understanding Your Phone 8

Section 2: Understanding Your Phone

This section outlines some key features of your phone. It also describes the screen format and the icons that will be displayed when the phone is in use.

Features of Your Phone

•

Domestic and international voice and text messaging service (available on participating networks).

•

High speed data (CDMA 2000 1x Technology)

•

Global Positioning (GPS) Technology

•

PIM Functions

•

Text (SMS) Messaging

•

Voice Dial

•

Speakerphone

Closed View of Your Phone

Features

Volume Key

— Lets you adjust the ring volume in standby mode, adjust the voice volume during a call, or mute the ringer during an incoming call.

Front Display

— Indicates the status of your phone, including status icons, message indicators, signal strength, and so on.

Page 12

Speakerphone / Push-To-Talk (PTT) Key

— In Standby

mode, pressing this key launches the

ChatLINK

screen,

enabling PTT operation.

In Standby and Call modes, pressing and holding this key toggles your phone in/out of Speakerphone mode.

In PTT mode, pressing and holding this key enables you to talk (release to listen).

Power / Accessory Connector

— Used to plug in charging accessories and to connect a headset or any available accessory cables to your phone.

Open View (Front) of Your Phone

Features

Earpiece / Speaker

— Lets you hear ringing and alert

tones, alarm tones, and the other parties to calls.

5 6 7

Page 13

Understanding Your Phone 10

Main Display

— Indicates the status of your phone, including numbers dialed, feature and function screens, status icons, message indicators and contents, signal strength, and so on.

Navigation Key

— In Menu mode, lets you scroll through the phone menu options. In Standby mode, lets you access preset functions and one user-defined function.

OK Key

— Pressing when navigating through a menu

accepts the highlighted choice in a menu.

Left Soft Key

— Used to navigate through menus and applications and to select the choice indicated at the bottom left corner of the Main LCD.

SEND Key

— Lets you place or receive a call. In standby

mode, press the key once to access the recent call log.

CLR Key

— Deletes characters from the display when you are in text entry mode. Press this key to return to the previous menu or screen when navigating features on your phone.

Voicemail Key

— Lets you speed dial your Voicemail

account to review your voice messages.

Special Function Keys

— Enter special characters.

Perform various functions.

10.

Microphone

— Lets the other caller hear you clearly

when you are speaking to them.

11.

Voice Recognition Key

— Used to launch VoiceSignal

voice recognition system.

12.

Alpha-numeric Keys

— Use these keys to enter

numbers, letters, and characters.

13.

END Key

— Ends a call. If you press and hold the END key, the power goes On or Off. When you receive an incoming call, press to send the call to voicemail.

14.

Right Soft Key

— Used to navigate through menus and applications and to select the choice indicated at the bottom right corner of the Main Display.

Command Keys

Functions for the soft keys are defined by what appears above each in the display. There are two soft keys, the Left soft key and the Right soft key .

Left Soft Key

Some functions of the Left soft key ( ) are as follows:

•

In standby mode, press the

Contacts

key ( ) to open the Contacts

Find

screen.

•

When the Left soft key function is Edit, press the

Edit

key ( ) to edit

a Contacts entry.

Page 14

Right Soft Key

Some functions of the Right soft key ( ) are as follows:

•

In standby mode, press the

@metro

key ( ) to launch the @metro

screen.

•

When the Right soft key function is Options, press the

Options

(right)

soft key ( ) and a pop-up menu appears.

•

When the Right soft key function is Back, press the

Back

(right) soft

key ( ) to back up one menu level.

OK Key

•

In a menu, press the OK key ( ) to accept the highlighted selection.

•

When the OK key function is Edit, press the

Edit

( ) key to edit a

Draft message.

Clear Key

The

CLR

key ( ) is used to erase or clear numbers, text, or symbols from the display. You can also use the key to return to a previous menu or to return to standby mode from any menu.

•

If you enter an incorrect character, briefly press to backspace

(and delete) the character.

•

To erase the entire sentence, press and hold .

•

To back up one menu level, briefly press .

End Key

•

Press and hold the End key to turn on your phone.

•

Briefly press once to disconnect a call.

•

Press to return to standby mode from any menu, or to cancel the last input.

Send Key

The

Send

key ( ) is used to answer calls, dial calls, and to

recall the last number(s) dialed, received, or missed.

•

Press once to answer calls.

•

Enter a number and briefly press to make a call.

•

Briefly press in standby mode to display a list of recent calls to and from your phone.

•

Press twice in standby mode to call the most recent number.

•

Press to pick up a waiting call. Press again to switch back to the other call.

Navigation Key

Use the directional keys on the Navigation key ( ) to browse menus, sub-menus, and lists. Each directional key also acts as a shortcut to launch applications.

Page 15

Understanding Your Phone 12

Understanding the Display Screen

1. The top line of your

phone’s display contains icons that indicate network status, battery power, signal strength, connection type, and more.

2. The center portion of

the display shows information such as call progress information, messages, and photos.

3. The bottom line of the display shows current soft key

functions. The sample screen shows that pressing the Left soft key ( ) will display the Contacts

Find

screen, pressing the OK key ( ) will display the Main Menu, and pressing the Right soft key ( ) will show the @metro screen.

Display Screen Icons

Your Byline phone can show you definitions of the icons that appear on the top line of the display.

To access the Icon Glossary:

䊳

In standby mode, press the

key ( ), then select

Settings

➔

Phone Info

➔

Icon Glossary

. A list shows of

the icons that can appear on the top line of the displays.

Dialogue Boxes

Dialogue boxes prompt for action, inform you of status, or warn of situations such as low battery. Dialogue boxes and their definitions are outlined below.

•

Choice

–

Example:

“Save Message?”

•

Reconfirm

–

Example:

“Erase All Messages?”

•

Performing

–

Example:

“Sending...” “Connecting...”

•

Completed

–

Example:

“Message Saved”

•

Information

–

Example:

“New Message”

•

Error

–

Example:

“System Error!”

•

Warning

–

Example:

“Low Battery,” “Memory Full!”

Page 16

Backlights

Backlights illuminate the display and the keypad. When you press any key or open the phone, the backlights come on. They go off when no keys are pressed within a period of time set in the Backlight menu.

Note:

During a phone call, the display backlight turns on for 10 seconds, then dims for 30 seconds, then turns off to conserve battery power, regardless of the Backlight setting.

(For more information, refer to “Backlight” on page 79.)

Your Phone’s Modes

Call Answer Mode

You can choose to answer a call by pressing any key except or , by pressing only the key, or by opening the phone’s flip. (For more information, refer to “Call Answer” on page 20.)

Input mode

Input mode determines how you enter text, numbers, and symbols. While at any text entry screen, press the Left soft key ( ), then choose the input mode from the pop-up menu using the Navigation key. Optional input modes are

T9 Word, Abc, ABC

Symbols

, and

123

. (For more information, refer to “Entering Text”

on page 27.)

Tip:

You can cycle between

T9 Word, Abc

, and

123

by repeatedly pressing and

holding the key until the phone beeps.

Lock Mode

When the phone is in Lock Mode, restrictions are placed on phone use. You can receive calls and messages, but cannot place outgoing calls (except for emergency numbers) until you unlock the phone. Lock Mode also restricts access to menus and the Volume key. Unlock your phone by entering the lock code when prompted. (For more information, refer to “Change Lock” on page 85.)

Standby Mode

Standby mode is the state of the phone once it has found service and is idle. The phone goes into standby mode:

•

After you power the phone on.

•

When you press after a call or from within a menu.

In standby mode, you will see the time, day, and date as well as all phone status icons.

Place Calls in Standby Mode

1. While in standby mode, enter a phone number,

and press to place a call.

2. Press to return to standby mode.

Page 17

Understanding Your Phone 14

Receive Messages in Standby Mode

You can receive messages in standby mode. An alert tone sounds and a notification message appears in the display when a new message arrives. The following call message options appear:

•

View Now

— This selection allows you to view the messages now.

•

View Later

— This selection allows you to view the messages at a

later date.

Highlight the desired viewing option and then press .

Talk Mode

You can place and receive calls only when your phone is on. While in a call your phone is in talk mode. Press the

Options

key ( ) to display a list of menu options. (For more information, refer to “In-Use Menu” on page 21.)

Speakerphone Mode

Lets you use your phone handsfree and/or lets you share a call with other people nearby.

To enter Speakerphone Mode from Standby Mode:

䊳

While in Standby mode, press and hold the Speakerphone/PTT key ( ), on the right side of the phone. “

Speaker On

” appears in the display, followed by the Speakerphone icon ( ) appearing in the status icon bar.

To exit Speaker Mode from Standby Mode:

䊳

While in Speakerphone mode, press and hold the Speakerphone/PTT key ( ), on the right side of the phone. “

Speaker Off

” appears in the display.

To enter Speakerphone Mode during a call:

1. During a call, press and hold the Speakerphone/PTT key

( ), on the right side of the phone. You are prompted to confirm you want the speaker on.

Caution!:

Keep the phone away from you ear while in Speakerphone Mode. (For more information, refer to “Responsible Listening” on page 100.)

2. Press the

Yes

soft key. The Speakerphone icon ( )

appears in the display.

To exit Speaker Mode:

1. During a call using Speakerphone mode, press and hold

the Speakerphone/PTT key ( ), on the right side of the phone. You are prompted to confirm you want the speaker off.

2. Press the

Yes

soft key. The Speakerphone icon ( )

disappears from the display.

Enter/Exit Silent Mode

Silences all tones your phone makes and replaces all of the ringers with vibration.

Page 18

To enter Silent Mode:

䊳

In standby mode, press and hold . “

Entering Silent

Mode

” briefly appears in the display and your phone

returns to standby mode.

To exit Silent Mode:

䊳

While in Silent mode and standby mode, press and hold

. “

Exit Silent Mode

” briefly appears in the display

and your phone returns to standby mode.

Adjust the Ringer

In standby mode, press the Volume key ( ) up or down.

1. In standby mode, press the Volume key ( ) on

the left side of the phone up or down to set the call ringer volume as desired.

Options are:

2. When you are satisfied with the setting, press

SET

. Your

phone returns to Standby mode.

Tip:

You can also enter the

Volume

Voice Calls

sub-menu by pressing

➔

Settings

➔

Sound Settings ➔ Volume ➔ Voice Calls

. Use the Volume

key on the left side of your phone to adjust the ringer volume setting.

Vibrate Mode

In vibrate mode, the incoming call ringer is supplemented (

Vibrate/High

mode) or replaced (

Vibrate

mode) by vibration.

Other ringers are unaffected.

䊳

In standby mode, repeatedly press the Volume key ( ) down until “

Vibrate

” appears in the display.

The Volume key is on the left side of phone.

Note:

The Vibrate icon ( ) appears in the display when the phone’s ringer is in

Vibrate

mode.

The Vibrate/Ring icon ( ) appears in the display when the phone is in

Vibrate/High

mode.

•Ringer Off •Medium

•Vibrate •Medium/High

•Low •High

• Low/Medium • Vibrate/High

Page 19

Call Functions 16

Section 3: Call Functions

This section provides procedures for making and answering calls. This section also describes features, such as call logs and call timers, that help you make calls and manage your call time.

Making a Call

1. With the phone on, enter the number you wish to call

using the keypad.

Tip:

You can also make calls to your Contacts and to recent callers listed in the Calls logs.

2. Press to place the call.

Emergency Calls

When you call an Emergency Number, such as 911, your Byline phone locks itself in emergency mode, only allowing you to make calls to the emergency call center you originally contacted. This enables emergency operators to more easily dispatch aid, such as police, fire fighting, and emergency medical personnel.

1. With the phone on, enter the Emergency Number you

wish to call using the keypad.

Note:

You can define up to 3 emergency numbers in your phone. (For more information, refer to “Emergency #” on page 85.)

2. Press to place the call.

Tip:

If you need to make an emergency (911) call with Airplane mode enabled, just dial the emergency number and press . (For more information, refer to “Airplane Mode” on page 83.)

Three-way Calling

Call two other numbers and connect them to your call using three-way calling.

1. In standby mode, enter the number for the first party in

your call, then press .

2. When connected, ask the other party to remain on the

line. Press to place them on hold.

3. Enter the second party’s phone number and press .

4. When the second party answers, press to connect

all three parties.

Manual Pause Calling

To manually call a number with pause(s) without storing it in your Contacts list:

1. In standby mode, enter the number you wish to call.

2. Press the

Options

soft key.

The following pause options appear in the display:

Page 20

• 2-Sec Pause

— A 2-second pause after which dialing resumes.

•Wait

— A hard pause (waits for input from you).

3. Use the Up/Down navigation or arrow keys to highlight

the desired pause.

4. Press to enter the highlighted pause into the

number sequence.

5. Press to call the number.

If you include a Wait with the number and after you make the required entry, press to send your input.

Tip:

Press the

Save

soft key to store pauses along with the number if you plan to

call the number frequently.

Speed Dialing

Speed Dialing lets you place a call to any Contact stored in your Contacts list by dialing the Contact’s Location number.

1-Touch Dialing

Use 1-touch dialing to speed dial Contacts from 1 (Voicemail) through 9.

䊳

In standby mode, press and hold the number key corresponding to the desired Contact’s speed dial number.

Example:

To speed dial the Contact assigned speed dial 5, press and hold .

2-Touch Dialing

Use 2-touch dialing to speed dial Contacts from 10 through 99.

1. In standby mode, press and release the number key

representing the first digit of the desired Contact’s speed dial number.

2. Press and hold the number key representing the second

digit of the desired Contact’s speed dial number.

Example:

To speed dial the Contact assigned speed dial 35, press then press and hold .

3-Touch Dialing

Use 3-touch dialing to speed dial Contacts from 100 through 999.

1. In standby mode, press and release the number key

representing the first digit of the desired Contact’s speed dial number.

2. Press the number key representing the second digit of

the desired Contact’s speed dial number.

3. Press and hold the number key representing the third

digit of the desired Contact’s speed dial number.

Example:

To speed dial the Contacts entry assigned to speed dial 325, press

, press , then press and hold .

Page 21

Call Functions 18

Voice Dialing

The voice recognition capabilities of your Byline phone are exceptional due to advanced, speaker-independent technology. This means you do not need to “train” your phone to understand your voice. You can use your voice in a natural manner to dial numbers.

Note:

End Calls Before relaunching the VoiceSignal voice recognition software — When you use Voice Dialing to make a call, you must end that call before you can use other Voice Commands. (For more information, refer to “Voice SVC” on page 58.)

Use the

Call

command to dial any number stored in your Contacts list by saying the name of the contact (Name Dialing). You can also use Call to dial any telephone number, even numbers not stored in your contact list, by speaking the individual digits in the number (Digit Dialing).

Voice Dialing Tips:

•

Wait for the beep before speaking.

•

Speak clearly at a normal volume, as if you were talking to someone on the phone.

•

When saying a name, say the first name then the last name.

Dialing a Name

To dial a name, do the following:

1. In standby mode, press and hold .

“

Say a Command

” appears in the display and is

pronounced through the earpiece.

2. Say, “

Call

”.

You are prompted to “

Say the name or number

”.

3. Speak clearly and say the name of a person in your

Contacts list, first name followed by last name.

If the name is recognized, Voice Dial repeats the name and dials the number.

If Voice Dial is not sure which name you said, it displays a choice list of up to three names and prompts you with “

Did you say?

” followed by the first name on the list.

4. Say “Yes” to confirm the name or “No” to hear the next

name, or use the keypad to select the correct name from the list. (For more information, refer to “Choice Lists” on page 59.)

•

Press the

Repeat

soft key to say the name again.

•

Press the

Settings

soft key, then press the

Exit

soft key to exit

VoiceSignal without dialing.

If the recognized name has multiple numbers stored for it (that is, Home, Work, Mobile, and so on), Voice Dial displays the possible choices and prompts you with “

Which number?

”

5. Say one of the following number types:

•“Home

”

Page 22

•“Work

”

•“Mobile

”

Voice Dial dials the specified number.

Dialing a Number

To dial a number using Voice Dial, do the following:

1. In standby mode, press and hold .

“Say a Command” appears in the display and is pronounced through the speaker.

2. Say “Call”.

VoiceSignal prompts you to “Say the name or number.”

3. Speak clearly and say the telephone number of the

person you want to call.

Example:

Say “

7 8 1 9 7 0 5 2 0 0

If it recognizes the number, Voice Dial repeats it and dials the number. If Voice Dial is not sure it has recognized the number, it displays a choice list of up to three numbers and prompts you with “

Did you say?

”

followed by the first number on the list.

4. Say “

Yes

” to confirm the number or “No” to hear the next one, or use the keypad to select the correct number from the list. (For more information, refer to “Choice Lists” on page 59.)

•

Press the

Repeat

soft key to say the name again.

•

Press the

Settings

soft key, then press the

Exit

soft key to exit

VoiceSignal without dialing.

Pause Dialing From a Contacts Entry

If you voice dial a contact that contains 2-Sec Pause(s) simply wait for the pauses to pass and the dialing to complete.

If you voice dial a contact that contains Wait(s), wait for the appropriate prompt(s) from the number you are calling (credit card number, bank account number, and so on) and enter the appropriate response(s).

Answering a Call

Incoming

When you receive a call, the phone displays one of the following:

•

If the caller can be identified, the caller’s number (or name if it’s in your Contacts) appears in the display.

•

If the caller cannot be identified, “

Call from unavailable #

”, “

Call

from restricted #

”, or no number appears in the display.

Tip:

Assign pictures to Contacts entries. The entry’s assigned picture appears in the display when you receive a call from that entry. (For more information, refer to “Assigning a Picture to a Contacts Entry” on page 35.

The phone continues to notify you of the call until one of the following events occurs:

Page 23

Call Functions 20

•

You answer the call.

•

The calling party ends the call.

•

The call is sent to voicemail.

Call Notification Features

Your phone notifies you of a call in a variety of ways.

•

Eight ring volume settings:

Ringer Off, Vibrate, Low, Low/Medium

Medium, Medium/High, High

, or

Vibrate/High

•

Different ring types or melodies to distinguish callers.

•

Name display with caller ID. (If the caller’s name is programmed into your Contacts).

•

Information about the last 90 each of incoming, missed, and outgoing calls are automatically stored in a Calls log.

Set Call Ringer Volume

1. In standby mode, press the Volume key ( ) on

the left side of the phone up or down to set the call ringer volume as desired. Options are:

2. Press

SET

once you’re satisfied with the setting. The

phone returns to standby mode.

Tip:

You can also enter the

Volume

Voice Calls

sub-menu by pressing

➔

Settings

➔

Sound Settings ➔ Volume ➔ Voice Calls

. Use the Volume key on

the left side of your phone to adjust the ringer volume setting.

Note:

The Vibrate icon ( ) appears in the display when the phone is in

Vibrate

mode. The Vibrate/Ring icon ( ) appears in the display when the phone is in

Vibrate/High

mode.

Call Answer

Select from three methods for answering calls. This option can be changed in the

Settings

menu.

1. In standby mode, press

➔

Settings

➔

Call Settings

➔

Call Answer

2. Use the Navigation key to highlight one of the following

options:

•Any Key

— Pressing any key except or

answers a call.

• Send Key

— Only pressing answers a call.

• Flip Open

— Only opening the phone’s flip or pressing

answers a call.

3. Press to activate the desired method for answering

calls.

•Ringer Off •Medium

•Vibrate •Medium/High

•Low •High

• Low/Medium • Vibrate/High

Page 24

Call Waiting

If you’re on a call, your phone beeps when another call is incoming. Contact your Wireless Carrier for availability.

1. Press to connect and ask the calling party to

remain on the line.

2. Press and the second caller is placed on hold and

you’re returned to the original caller.

3. Press to alternate between calls.

Caller ID

Caller ID lets you identify who is calling you by displaying a caller’s number. If the caller’s name and number are stored in Contacts, the caller’s name also appears. If you’ve assigned a picture to the entry, it appears in the display as well.

Call Block

You can prevent your number from displaying on another phone’s caller ID screen by enabling Call Block.

1. In standby mode, enter , , .

2. Enter the number you wish to call, then press .

Silence an Incoming Ring

䊳

During an incoming call, press the Volume key ( ) on the left side of the phone up or down to silence the ringer.

Ignore an Incoming Call

Ignored calls are immediately forwarded to Voicemail.

䊳

During an incoming call, press the

Ignore

soft key. The

incoming call is forwarded to Voicemail.

In-Use Menu

You can access a number of menus and features even while in a call.

1. While in a call, press the

Mute

Unmute

soft key to

disable/enable the microphone.

2. While in a call, press the

Options

soft key.

The following options appear in the display:

•Speaker On

Off

— Enables/disables Speakerphone mode.

•Message

— Display the Messages menu.

•Contacts

— Display the Contacts menu.

• Recent Calls

— View your recent calls log.

• Send DTMF

— Send your phone number as DTMF tones to the

other person on the call.

• Voice Privacy

— When set to Enhanced, the phone sounds an audible beep when you loose privacy (encryption) on a CDMA connection. For this option to work correctly, you must have the Enhanced privacy option enabled in the Security settings. (This option is enabled by default.)

•Location

— Turn your GPS location on or set GPS location for

emergency calls only.

Page 25

Call Functions 22

Within the above menu list, do one of the following:

•

Use the Navigation key to highlight a menu or feature. Press to open the highlighted menu or to activate the highlighted feature.

•

Press

Cancel

to exit the menu.

Calls Logs

Your phone has Call Logs that retain information about Outgoing, Incoming, and Missed calls. The

Calls

menu lets you access this information for future reference, to return calls, and to add new Contacts. You can also view times and dates for your call and the total times for all calls.

Tip:

To quickly view a list of your most recent calls (Outgoing, Incoming, and Missed), briefly press the key in standby mode. The

All Calls

screen listing

up to 270 of your most recent calls appears in the display.

1. In standby mode, press

➔

Calls

2. Use the Navigation key to highlight one of the following

calls logs:

• Outgoing Calls

— Stores and lists records of the last 90 calls you

originated (outgoing) on your phone.

• Incoming Calls

— Stores and lists records of the last 90 calls you

received and answered (incoming) on your phone.

• Missed Calls

— Stores and lists records of the last 90 calls you

received but did not answer (missed).

• All Calls

— Lists the up to 270 call records stored in the Outgoing

Calls, Incoming Calls, and Missed Calls logs.

• Call Timer

— Shows duration of the Last Call, total durations of all Outgoing Calls, Incoming Calls, Roaming Calls, and All Calls since the last time the timers were reset, date and time of the last timers reset, and the Lifetime duration of all calls made since the phone was first activated.

• Data Counter

— Shows the total data Transmitted, Received, and the combined Total all since the last time the counters were reset, the date and time the counters were last reset, and the Lifetime total of data transmitted and received since the phone was first activated.

3. Press . The selected Calls list appears in the display

with the first call in the list highlighted.

Tip:

To view further information about a particular call, use the Navigation key to highlight the call, then press .

4. Press

Options

. The following options appear in the

display:

•Save

— Save the number to your Contacts. (For more information,

refer to

“Store Numbers from Call Logs”

on page 23.)

• Details

— Contacts calls only — Lets you view the Contacts entry

for the originator or recipient of this call.

•Erase

— Erase a selected, unlocked call from this call list.

•Lock

Unlock

— Blocks/permits erasure of the selected call from

this call list.

•Erase all

— Erase all unlocked calls from this call list.

Page 26

•View Timer

— Call Timer screen appears in the display listing the number and types of calls and their total durations. (For more information, refer to

“Call Timer”

on page 23.)

5. Use the navigation keys to highlight an option.

6. Press to perform the highlighted option’s function.

Store Numbers from Call Logs

Store numbers from your Outgoing, Incoming, Missed, and All calls logs to Contacts.

Tip:

In standby mode, briefly press to display the Recent Calls list. You can then select any call in the list to save to Contacts.

1. In standby mode, press

➔

Calls

2. Use the Navigation key to highlight

Outgoing Calls

Incoming Calls, Missed Calls

, or

All Calls

, then press .

3. Use the Up and Down navigation keys to highlight the

number you wish to store in Contacts and press .

4. Press the

Options

soft key, then use the Up and Down

navigation keys to highlight

Save

5. Select

Create New

to add the number as a Contacts

entry, or select

Update Existing

to find a Contact with

which to associate the new number.

6. Follow the prompts to store the number to Contacts.

Erase Logs

You can erase any or all calls from individual calls logs (Outgoing Calls, Incoming Calls, or Missed Calls) or from all calls logs at the same time (All Calls).

1. In standby mode, press

➔

Calls

2. Use the Navigation key to highlight

Outgoing Calls

Incoming Calls, Missed Calls

, or

All Calls

, then press the

key.

The selected Calls list appears in the display with the first call in the list highlighted.

3. Press the

Options

soft key to display a pop-up Options

menu.

4. Use the Up and Down navigation keys to highlight

Erase

all

, then press the key.

“

Erase all entries?

” appears in the display.

5. To Erase all unlocked calls from the selected calls log,

press the

Yes

soft key.

To keep all calls in the selected calls log, press the No soft key.

Call Timer

View the duration of your last call, total calls, and calls made during the life of your phone using the Call timer feature.

Page 27

Call Functions 24

Note:

Call timer is not for billing purposes.

1. In standby mode, press

➔

Calls

➔

Call Timer

. The

Call Timer

screen appears in the display with the first

timer in the list highlighted.

2. Use the Navigation key to highlight one of the following

timers:

•Last Call

— Shows the duration of the last call made with or

received by your phone since last being reset.

• Outgoing Calls

— Shows the total number and duration of calls

made with your phone since last being reset.

• Incoming Calls

— Shows the total number of calls received since

last being reset.

• Roaming Calls

— Shows the total number and duration of calls made with or received by your phone while roaming since last being reset.

• All Calls

— Shows the total number and duration of all calls made

with and received by your phone since last being reset.

•Last Reset

— Shows the date and time the call timers were last

reset.

• Lifetime Calls

— Shows the total number and duration of all calls

made with and received by your phone since being activated.

3. Press

Reset

to reset the highlighted timer.

4. Press

Reset All

to reset all of the timers except Lifetime

Calls.

5. Press to exit the Call Timer screen.

Note:

Although Total call timers can be erased, LifeTime call timers can never be erased.

Data Counter

Use Data Counter to view the amount of data that has been sent or received (or a total of both) using the data services that your phone supports. The Data Counter can be a helpful tool for monitoring data usage, especially if your service agreement has specified limits.

1. In standby mode, press the

➔

Calls

➔

Data

Counter

. The following counters appear:

•Transmit

— Shows the amount of data (in kilobytes) that your

phone has transmitted since last being reset.

• Received

— Shows the amount of data (in kilobytes) that your

phone has received since last being reset.

•Total

— Shows the amount of data (in kilobytes) that your phone

has transmitted and received since last being reset.

•Last Reset

— Shows the date and time the data counters were

last reset.

• Lifetime Data Counter

— Shows the amount of data (in kilobytes) that your phone has transmitted and received since being activated.

Page 28

To reset a timer other than Lifetime Data Counter, use the Up/Down navigation keys to highlight the timer you want to reset and press the

Reset

soft key.

3. To reset all timers except Lifetime Data Counter, press

the

Reset All

soft key.

4. Press to exit the Data Counter screen.

Note:

Although other data counters can be reset, the Lifetime Data Counter can never be reset.

Page 29

Menu Navigation 26

Section 4: Menu Navigation

This section explains the menu navigation for your phone. It also includes an outline of all the available menus associated with your phone.

Menu Navigation

Access the menus and sub-menus in your phone using the

Navigation key ( ) and soft keys ( or ), or use a

shortcut.

1. In standby mode press the

key ( ). The Main

Menu appears in the display.

Note:

More than one menu may appear in your display. This setting can be modified in the

Display

Menu Style

menu. (For more information, refer to

“Settings” on page 76.)

2. Use the Navigation key to browse through the menus.

3. Press to access a desired menu or sub-menu.

4. Press the

Back

soft key or the CLR key ( ) to return

to the previous menu.

Navigate Using Menu Shortcuts

You can also access menus and sub-menus using menu numbers. Enter the menu number after pressing the

key

( ) to go directly to the menu or sub-menu of your choice. Before you can navigate using a shortcut, you’ll need the menu or sub-menu number that you wish to access.

1. In standby mode, press the

key ( ).

2. Press the number of the menu, sub-menu, and so on for

the feature that you wish to access.

Example:

To launch the Calendar tool, press

➔

To ol s

➔

Calendar

Navigation Key Shortcuts

In standby mode, press a Navigation key to launch the key’s corresponding application in the pattern shown here.

Contacts

@metro

MetroWEB

Message

Page 30

Section 5: Entering Text

This section outlines how to select the desired text entry mode when entering characters using the phone keypad. This section also describes how to use the T9 predictive text entry system to reduce the number of key strokes needed to enter text.

Changing the Text Entry Mode

Text messages can be made up of alphabetical characters, numbers, and symbols. You can use the following text entry modes to simplify text entry:

•

T9 Word

— Press each phone key only once to enter the letter of the

word that you’re spelling. T9 WORD mode letter options are:

–

T9 Word

— Enter initial capital letters

–

T9 WORD

— Enter all upper case letters

–

T9 word

— Enter all lower case letters

•

Abc

— Enter letters by repeatedly pressing each phone key until the desired character (as shown on the key) appears in the display. ABC mode letter options are:

–

Abc

— Enter initial capital letters

–

ABC

— Enter all upper case letters

–

abc

— Enter all lower case letters

•

123

— Enter numbers by pressing the corresponding keys on the

phone keypad.

•

Symbols

— Using the phone keypad, enter a symbol into your message by pressing the number above the symbol in the Symbols pop-up window.

The current text entry mode (

T9 Word, Abc, ABC, 123

, or

Symbols

) is indicated in the lower part of a text entry screen. To change the text entry mode while composing a text message:

1. Repeatedly press and hold to toggle between

Abc

123

, and

T9Word

modes.

2. Repeatedly press to toggle between

Abc, ABC, Abc

or between

T9Word, T9WORD

, and

T9word

Or, do the following:

1. Press the Left soft key.

2. Use the Navigation key to highlight one of the following

text entry modes:

• T9Word

•Abc

•ABC

• 123

•Symbols

• Add T9 Word

— Lets you add words to the T9Word dictionary.

3. Press .

Page 31

Entering Text 28

Using T9® Mode

T9 Word recognizes commonly used words for the numeric sequence of key presses and inserts the word into your message. T9 Word is much faster than the traditional method of text entry (Abc) and requires only one key press per letter of the word that you’re spelling.

1. While composing a text message, press the Left soft

key. Use the Navigation key to highlight

T9Word

, then

press .

2. For practice, enter the word “

Samsung

” by pressing

each of the following keys only once:

T9 Word recognizes that the most commonly used word for the numeric sequence you just entered is “Samsung.” If more than one word shares the same numeric sequence, T9 Word provides the most commonly used word. Press to display other words, if available.

Note:

To enter a space, press the key. To enter a period, press the key. These key functions apply to both T9 Word and Abc modes. (For other symbols, see “Entering Symbols” on page 29.)

Using Abc Mode

1. While composing a text message, press the Left soft

key. Use the Navigation key to highlight

Abc

ABC

, then

press .

2. Enter characters while in Abc mode by pressing a key

repeatedly until the desired character appears in the display.

Example:

Press once for “G” and twice for “H”.

3. Pause briefly and the displayed character is accepted

and inserted into your message.

4. Press to enter a space and press to enter a

period.

Entering Numbers

Enter numbers into a text message while in 123 mode.

1. While composing a text message, press the Left soft

key. Use the Navigation key to highlight

123

, then press

2. Enter numbers while in 123 mode by pressing the key

labeled with the corresponding number that you wish to insert into your message.

SAMSUNG

Page 32

Entering Symbols

Enter symbols such as “@” or “%” into a text message.

1. While composing a text message, press the Left soft

key, use the Navigation key to highlight

Symbols

, then press . The first of three symbol screens appears in the display.

2. Use the

and

soft keys to page through the

other symbols, if desired.

3. Press the key that corresponds with the symbol that you

wish to enter.

Example:

Press for an exclamation point (!).

4. Repeat these steps to insert additional symbols into your

message.

Page 33

Understanding Your Contacts 30

Section 6: Understanding Your Contacts

This section details how you can manage your daily contacts by storing their names and numbers in your Contacts list. You can have your Contacts entries sorted by name.

Contacts

Up to 500 entries can be stored in Contacts. Each entry can have up to five associated phone numbers and one e-mail address. Each phone number can be up to 32 digits in length, including

Sec

Wait

pauses (see “Manual Pause Calling” on page 16 for more information), and associated names can be up to 32 characters in length. You can assign the Speed Dial numbers of your choice for each entry. You can also mark your Contacts list as Restricted to prevent unauthorized viewing. (For more information, refer to “Restriction” on page 86.)

Tip:

Speed Dial

One-Touch Dialing, Two-Touch Dialing

, and

Three-Touch Dialing

allow you to call numbers stored in Contacts faster.

Open Contacts

1. In standby mode, press

➔

Contacts

. The following

options appear in the display:

•Find

— Find a Contacts entry by name.

Tip:

You can also access the

Find

option from standby mode, by pressing the

Contacts shortcut (Up Navigation) key.

•Add New Entry

— Add a number or e-mail address to your

Contacts.

• Speed Dial

— Assign a Contacts entry to a Speed Dial number.

(For more information, refer to

“Speed Dialing”

on page 17.)

•Group

— Review, send messages to, add Contacts to, or rename

four out of your five groups. (For more information, refer to

“Contacts Groups”

on page 39.)

•ChatLINK

— Launches ChatLINK, a wireless carrier-provided

application.

• Metro411

— Launches Metro411 Directory Assistance. (For

more information, contact your Wireless Carrier.)

•Memory Info

— Display used and available memory for Contacts

entries.

Tip:

To launch the

Contacts

menu using a voice command — In standby mode,

press and hold until the phone prompts, “

Say a command.

” Say “

Go to

Contacts

” into the microphone.

2. Use the Navigation key to highlight the option of your

choice, and press .

Page 34

Note:

You can also press the keypad number key that corresponds to the menu option number.

Finding a Contacts Entry

Voice Method

Use the VoiceSignal Lookup command to view contact information for any named contact stored in your Contacts list by saying the name.

Note:

The

Lookup

command shows the requested contact information in the

display but does not dial any phone numbers for the contact.

To look up information for a specific contact:

1. In standby mode, press and hold the key to launch

VoiceSignal.

“

Say a Command

” appears in the display and is

pronounced through the speaker.

2. Say “

Lookup

”.

VoiceSignal prompts you to “

Say the name.

”

3. Speak clearly and say the full name of the person you

want to call, exactly as it is entered in your Contacts list.

•

If VoiceSignal recognizes the name you said, the Contact entry information for that name appears in the display.

•

If VoiceSignal does not recognize the name you said, a choice list of up to three names appears in the display, and VoiceSignal prompts you with “

Did you say?

” followed by the first name on the list.

4. Say “

Yes

” to confirm the name or “No” to hear the next name, or use the keypad to select the correct name from the list. (For more information, refer to “Choice Lists” on page 59.)

•

To say the name again, press

Repeat

•

To exit VoiceSignal without dialing, press

Settings

and press

Exit

5. The contact information for the name you selected

appears in the display.

•

Press to dial the number associated with the name.

•

Press

Erase

to remove this entry from your Contacts list.

•

Press the

EDIT

key ( ) to add or change information for this

entry.

•

Press

Options

and the following options pop-up in the display:

–

Send Txt Msg

— Create and send a text message to the selected

Contact.

–

Call

— Dial the number associated with the name.

–

Send Name Card Via Bluetooth

— Allows you to send a message to the selected entry which contains the information from an name entry which you have on file.

Use the Navigation key to highlight an option, then press the key. The highlighted option’s sub-menu appears in the display.

Page 35

Understanding Your Contacts 32

Shortcut Key Method

If you’ve stored a name entry in Contacts, Find allows you to find it quickly.

1. In standby mode, press

Contacts

The

Find

screen appears in the display with the

Go To

field highlighted, followed by the first few names in your Contacts list.

Tip:

You can also access the

Find

screen from standby mode by doing one of the

following:

– Press the Up Navigation key.

– Press

➔

Contacts

➔

Find

2. Enter a name as entered in Contacts. For example, if you

saved the name as “Amy Smith”, begin the search by pressing (for “A”).

As you enter letters, the names of the closest matches appear in the display.

3. When the desired entry is listed in the display, use the

Up/Down navigation keys to highlight the entry.

•

Press to dial the number associated with the name.

•

Press

Edit

to add or change information for this entry.

•

Press the

VIEW

key ( ) to show information about the entry.

•

Press

Options

. The following options appear in the display:

–

New Contact

— Add a new entry to Contacts.

–

Erase

— Erase the name and associated information.

–

Send Txt Msg

— Create and send a text message to the selected

Contact.

–

Call

— Dial the number associated with the name.

–

Send Name Card Via Bluetooth

— Allows you to send a message to the selected entry which contains the information from an name entry which you have on file.

Use the Navigation key to highlight an option, then press the key. The highlighted option’s sub-menu appears in the display.

Adding a New Contacts Entry

You can use either of two methods to add an entirely new entry to Contacts.

Dial Method

1. Using the keypad, enter the number you wish to add to

your Contacts.

2. Press the

Save

soft key. The following options appear in

the display:

•Create New

— Lets you create a new Contacts entry.

• Update Existing

— Lets you add the number you entered to an

existing Contacts entry.

Page 36

Use the Navigation key to highlight

Create New

and

press . The

Create New

screen appears in the display

showing the following icons:

4. Use the Navigation key to highlight the number type that

matches your new entry, then press .

5. Use the keypad to enter a name to associate with the

Contacts entry.

6. Press

SAVE

to save the entry.

Menu Method

1. In standby mode, press

➔

Contacts

➔

Add New

Entry

The

Add New Entry

screen appears in the display with

the

Name

field highlighted.

2. Enter the name of the new entry using the keypad. (For

more information, refer to “Entering Text” on page 27.)

3. Use the Up and Down navigation keys to highlight one of

the following fields:

•Mobile

•Home

•Work

•Pager

•E-Mail

•Group

• Ringtone

•Fax

4. Enter a phone number in the highlighted field.

5. Repeat steps 3 and 4 as needed.

6. Press to save the new entry.

Editing a Contacts Entry

Editing Contacts Name and Numbers

1. Find the Contacts entry you wish to change. (For more

information, refer to “Finding a Contacts Entry” on page

31.)

2. Use the Navigation key to highlight the entry and press

VIEW

. The

View Contact

screen appears in the display

showing the highlighted entry’s information.

3. Use the Navigation key to review the information for the

entry that you wish to change, then press

EDIT

. The

Edit

Contact

screen appears in the display.

4. Use the Navigation key to highlight the particular

information you want to add or change.

•

Press to backspace and delete numbers or letters.

Mobile

Home

Work

Pager

Fax

Page 37

Understanding Your Contacts 34

•

Press and hold to clear all numbers or letters in the highlighted field.

•

Press

Options

. The following options popup in the display:

–

Set Speed Dial

Remove Speed Dial

— Assign/remove a speed

dial number (see

“Speed Dial”

on page 37. for more

information).

–

Set As Default

— Set the number the phone will dial when

Contacts dialing, speed dialing, or voice dialing.

–

Wait

— A hard pause (waits for input from you).

–

2-Sec Pause

— A 2-second pause after which dialing resumes.

(For more information, refer to

“Add Pauses to Contacts

Numbers”

on page 34.)

Use the Up/Down navigation keys to highlight the desired option, then press .

5. When you’re finished changing the contents of a field,

press . Your changes are saved and a confirmation message appears in the display.

Add Pauses to Contacts Numbers

Calls to automated systems such as banking services often require a password or account number. Instead of manually entering these numbers, you can store them in a Contacts entry with the phone number and with special characters called pauses, up to a maximum of 32 digits.

•

Wait

— Stops the calling sequence until the phone receives further

input.

•

2-Sec Pause

— Stops the calling sequence for two seconds, then

sends the remaining digits.

Note:

You can enter multiple Waits to extend the length of a pause. For example, two consecutive Waits cause a total pause time of four seconds. Keep in mind that pauses count as digits towards the 32-digit maximum.

To add pauses to a Contacts entry number, do the following:

1. Find the Contacts entry associated with the number you

want to include one or more pauses. (For more information, refer to “Finding a Contacts Entry” on page

31.)

2. Select and edit the desired number. (For more

information, refer to “Editing a Contacts Entry” on page

33.)

3. Press

Options

. The following pause options appear in

the display:

•Wait

— A hard pause (waits for input from you).

• 2-Sec Pause

— A 2-second pause after which dialing resumes.

4. Use the Up/Down navigation keys to highlight the pause

option of your choice.

5. Press to enter the highlighted pause into the

number sequence.

6. When you’re finished entering information, press to

store the number to Contacts.

Page 38

Pause Dial from Contacts

1. If you stored the number using 2-second pause(s),

simply recall the number from Contacts.

2. If you stored the number using Wait(s), recall the

number from Contacts and wait for the appropriate prompt from the dialed number.

3. Press to dial the number.

Edit an Existing E-Mail Address

1. Find the Contacts entry you want to edit. (For more

information, refer to “Finding a Contacts Entry” on page

31.)

2. Use the Up/Down navigation keys to highlight the

desired Contacts entry, then press

Edit

The

Edit Contact

screen appears in the display.

3. Use the Up/Down navigation keys to highlight the

E-Mail

field.

4. Use the keypad to edit the E-Mail address. (For more

information, refer to “Entering Text” on page 27.)

5. Press to save your changes.

Assigning a Picture to a Contacts Entry

When you assign a picture to a Contacts entry, the picture that you assigned to the entry appears in the display when you receive a call from that Contact.

1. Find the Contacts entry you want to edit. (For more

information, refer to “Finding a Contacts Entry” on page

31.)

2. Use the Up/Down navigation keys to highlight the

desired Contact, then press

Edit

The

Edit Contact

screen appears in the display.

3. Use the Up/Down navigation keys to highlight the

Picture ID field (at the top of the

Edit Contact

screen),

then press

Set

The

My Images

screen appears in the display, showing a series of thumbnail images. (For more information, refer to “My Images” on page 63.)

4. Use the Up/Down navigation keys to highlight the image

that you wish to assign to the Contacts entry, then press

The

Edit Contact

screen re-appears in the display with a thumbnail view of the selected image in the Picture ID field.

Page 39

Understanding Your Contacts 36

Press to save the picture assignment to the selected Contacts entry.

Assigning a Ringtone to a Contacts Entry

When you assign a ringtone to a Contacts entry, the phone plays the ringtone that you assigned to the entry when you receive a call from that Contact instead of the ringtone currently assigned to Voice Calls.

1. Find the Contacts entry you want to edit. (For more

information, refer to “Finding a Contacts Entry” on page

31.)

2. Use the Up/Down navigation keys to highlight the

desired Contact, then press

Edit

The

Edit Contact

screen appears in the display.

3. Use the Up/Down navigation keys to highlight the

Ringtone

field, then press

Set

The

Contact Tone

menu appears in the display showing

the following options:

• My Ringtones

• My Sounds

4. Use the Up and Down Up/Down navigation keys to

highlight the desired option, then press .

The

My Ringtones

or the

My Sounds

file list appears in

the display.

5. Use the Up/Down navigation keys to highlight the

ringtone or sound that you wish to assign to the Contacts entry, then press .

The

Edit Contact

screen re-appears in the display with

the name of the selected file in the Ringtone field.

6. Press to save the ringer assignment to the selected

Contacts entry.

Saving a Number After a Call

Once you finish a call, you can store the caller’s number to your Contacts list.

Note:

If the call was incoming and Caller ID information was unavailable, then the

Save

option is also unavailable.

1. Press to end your call. The call time, length of call,

phone number, and name of the party (if available) appear in the display.

2. Press

Save

. The following options appear in the display:

•Create New

— Lets you create a new Contacts entry.

• Update Existing

— Lets you add the number you entered to an

existing Contacts entry.

3. Follow the instructions in the upcoming sections

depending on whether the number is a new entry or you wish to add it to an existing entry.

Page 40

Create a New Entry

1. Use the Navigation key to highlight

Create New

and

press . The

Create New

screen appears in the display

showing the following number type options:

2. Use the Navigation key to highlight the number type that

matches your new entry, then press .

3. Enter a name for the new entry (see “Entering Text” on

page 27 for more information).

4. Press . The new entry is saved to your Contacts list.

Add to an Existing Entry

1. Use the Up/Down navigation keys to highlight

Update

Existing

and press . The

Update Existing

screen appears in the display showing your Contacts list with the

Go To

field and the first Contacts entry highlighted.

2. Find the Contacts entry to which you want to add the

new number. (For more information, refer to “Finding a Contacts Entry” on page 31.)

3. Press . The following number type options appear in

the display:

Number types that are already assigned a number show the number instead of the number type label.

4. Use the Up/Down navigation keys to highlight the

desired unassigned number type, then press . The Contacts entry information appears in the display with the new number posted in the appropriate number type field.

5. Press again to save your changes to the existing

entry.

Speed Dial

A Contacts entry’s Speed Dial number corresponds to the number keys you press to speed dial one of that entry’s numbers.

Example:

To speed dial the Contacts entry assigned to Speed Dial 5, press and hold , (1-touch dialing).

To speed dial the Contacts entry assigned to Speed Dial 35, press then press and hold , (2-touch dialing).

Mobile

Home

Work

Pager

Fax

Mobile

Home

Work

Pager

Fax

Page 41

Understanding Your Contacts 38

To speed dial the Contacts entry assigned to Speed Dial 235, press

, press , then press and hold , (3-touch dialing).

You can assign one or more Speed Dial numbers to a Contacts entry during new entry creation or by editing an existing entry.

Assignment During Entry Creation

To assign a Speed Call number to a new Contacts entry number, do the following:

1. Follow either of the New Contacts entry procedures (see

“Adding a New Contacts Entry” on page 32) until you enter a name for the entry.

2. After entering the Contacts entry name,

do not press

. Instead, use the Up/Down Up/Down navigation

keys to highlight the number field.

3. Press

Options

. The following options appear in the

display:

• Set Speed Dial

— Assign a speed dial number.

• Set as default

— Set the number the phone will dial when

Contacts dialing, speed dialing, or voice dialing.

•Wait

— A hard pause (waits for input from you).

• 2-Sec Pause

— A 2-second pause after which dialing resumes

(see

“Add Pauses to Contacts Numbers”

on page 34 for

more information).

Use the Up/Down Up/Down navigation keys to highlight

Set Speed Dial

, then press . The

Speed Dial

screen

appears in the display.

4. Use the Up/Down Up/Down navigation keys to highlight

an Unassigned Speed Dial number or enter an Unassigned Speed Dial number in the

Go To

field using

the keypad.

Important!:

Do not enter Speed Call numbers 1, 411, 611, or 911. These numbers are already assigned to Voicemail (001), to Information (411), to Customer Care (611), and to emergency use (911).

5. Press

SET

. You are prompted to confirm your Speed Dial

number assignment.

6. Press the

Yes

to save your Speed Dial assignment and

return to the

Add New Entry

screen.

Note:

Press No to discard the assignment and return to the

Speed Dial

screen.

7. Press to save your changes.

Changing a Speed Dial Location

1. Find the Contacts entry you want to edit. (For more

information, refer to “Finding a Contacts Entry” on page

31.)

2. Use the Up and Down navigation keys to highlight the

desired entry.

Page 42

Press

Edit

. The

Edit Contact

screen appears in the

display.

4. Use the Up and Down navigation keys to highlight the

number field marked by the Speed Dial icon ( ).

5. Press

Options

. The following options appear in the

display:

• Remove speed dial

— Unassign the current speed dial number.

• Set as default

— Set the number the phone will dial when

Contacts dialing, speed dialing, or voice dialing.

•Wait

— A hard pause (waits for input from you).

• 2-Sec Pause

— A 2-second pause after which dialing resumes.

(For more information, refer to

“Add Pauses to Contacts

Numbers”

on page 34.)

6. Use the Up/Down navigation keys to highlight

Remove

Speed Dial

, then press . “

Remove speed dial?

” pops up in the display to confirm your desire to remove the entry.

7. Press the

Yes

to remove the Speed Dial assignment.

“

Speed Dial Removed

” pops up in the display, and you

are returned to the

Edit Contact

screen.

8. Do steps 3 through 7 of “Assignment During Entry

Creation” on page 38.

Contacts Groups

Contact Groups let you easily send messages to multiple, selected Contacts. You can also use Groups to find Contact entries and to add/remove Contacts names in a Group or to create or rename a Group.

Add Contacts Entry to a Group

Using Add New/Edit Contact Option

To add a Contact to a Group using either the Add New Contact option or the Edit Contact option, do the following:

1. Create a Contacts entry (see “Adding a New Contacts

Entry” on page 32) or find a Contacts entry (see “Finding a Contacts Entry” on page 31) that you want to

add to a Group.

2. Use the Up and Down navigation keys to highlight the

Group

field, the press

Set

The

Select Group

screen appears in the display showing

Groups similar to the following:

• No Group

•Business

• Colleague

•Family

• Friends

Page 43

Understanding Your Contacts 40

Use the Up and Down navigation keys to highlight the Group to which you want to assign the selected Contact, then press .

You are returned to the

Add New Entry/Edit Contact

screen and the selected Group name populates the

Group

field.

4. Press to save your changes.

Using Group Add Option

The Add option lets you add one or more existing Contacts to a Group.

1. In standby mode, press

➔

Contacts

➔

Group

The

Group List

screen appears in the display showing

Groups similar to the following:

• No Group

•Business

• Colleague

•Family

• Friends

2. Use the Navigation key to highlight a Group, then press

Options

. The following options popup in the display:

• Send Txt Msg

•Rename

•Erase

•Add

3. Use the Navigation key to highlight

Add

, then press .

The

Add Contacts

screen appears in the display showing

a list of Contacts entries.

4. Do one of the following:

•

Use the Navigation key to highlight an entry you want to add to the group, then press

MARK

. A checkmark appears in the entry’s

checkbox. Repeat as needed to check all the desired Contacts.

•

Press

Mark All

Note:

To unmark a marked Contact, highlight the Contact and press

MARK

to clear

the checkmark.

5. When you have marked the Contacts you want to add to

the group, press

Done

. “

Contact added to group

” appears in the display, followed by the selected Group list including the added Contacts.

Rename a Group

The Rename option lets you change the name any of the Groups, except No Group.

1. In standby mode, press

➔

Contacts

➔

Group

. The

Group List

screen appears in the display.

2. Use the Navigation key to highlight the Group name

other than No Group that you wish to change, then press

Options

. The following options popup in the display:

Page 44

• Send Txt Msg

•Rename

•Erase

•Add

3. Use the Navigation key to highlight

Rename

, then press

The

Rename Group

screen appears in the display.

4. Enter changes to the group name using the keypad. (For

more information, refer to “Entering Text” on page 27.)

5. When you have completed your changes to the Group

name, press

SAVE

“

Group Renamed

” appears in the display followed by the

Group List

screen showing your renamed Group.

Add a New Group

The New option lets you add Groups.

1. In standby mode, press

➔

Contacts

➔

Group

. The

Group List

screen appears in the display.

2. Press

New

. The

New Group

screen appears in the

display.

3. Enter a new group name using the keypad. (For more

information, refer to “Entering Text” on page 27.)

4. When you have completed entering the new Group

name, press

SAVE

. “

Group Saved

” appears in the display

followed by the

Group List

screen showing your new

Group.

Erase a Group

The

Erase

option lets you delete a Group, thus freeing you to

reassign the Contacts formerly in the Group.

1. In standby mode, press the

➔

Contacts

➔

Group

The

Group List

screen appears in the display.

2. Use the Up and Down navigation keys to highlight the

Group that you wish to delete, then press

Options

The following options popup in the display:

• Send Txt Msg

•Rename

•Erase

•Add

3. Use the Navigation key to highlight

Erase

, then press the

key.

You are prompted to confirm the Group erasure.

4. Press

Yes

to confirm erasure of the Group. Press No to

retain the Group.

Deleting a Contacts Entry

1. Find the Contacts entry you want to delete. (For more

Page 45

Understanding Your Contacts 42

information, refer to “Finding a Contacts Entry” on page

31.)

2. Use the Navigation key to highlight the desired entry.

3. Press

Options

. The following options appear in the

display:

•New Contact

•Erase

• Send Txt Msg

•Call

•

Send Name Card Via Bluetooth

4. Use the Navigation key to highlight

Erase

, then press

. The phone prompts you to confirm the erasure.

5. Press

Yes

to confirm erasure of the selected Contact.

Press No to retain the Contact.

ChatLINK

ChatLINK is a downloadable Push-To-Talk (PTT) application provided by your Wireless Carrier. ChatLINK lets you conduct PTT calls with selected Contacts or Groups.

Obtaining ChatLINK

1. In standby mode, press

➔

Contacts

➔

ChatLINK

If ChatLINK is not present on your phone, “

Can’t find

application on phone. Click Yes to search catalog

” appears in the display. (For more information, refer to “@Metro” on page 44..)

2. Press the

Yes

soft key. The @metro MobileShop catalog

appears in the display.

3. Select and download the ChatLINK application.

4. Follow prompts and information from your Wireless

Carrier to setup ChatLINK on your phone.

Launching ChatLINK

1. In Standby mode, press

➔

Contacts

➔

ChatLINK

䊳

The

ChatLINK List

screen appears in the display. The ChatLink status icon also appears in the display, if not already present.

Using ChatLINK

To make/receive ChatLINK calls, set your ChatLINK status, and manage your ChatLINK Contacts and Groups, follow instructions provided by your Wireless Carrier and/or access the ChatLINK help information on your phone.

䊳

In the

ChatLINK List

screen, press the

Options

soft key and

select

ChatLINK Help

. The

ChatLINK Help

screen appears.

Page 46

Metro411

The 411 menu option lets you access Metro411 Directory Assistance service.

䊳

In standby mode, press

➔

Contacts

➔

Metro411

Metro411 Directory Assistance

screen appears in the

display.

Note:

For more information about Metro411 Directory Assistance service, contact your Wireless Carrier.

Memory Info

The Memory Info menu option lets you view the amount of memory you have used to store Contacts entries, as well as the memory remaining to store more Contacts entries.

䊳

In standby mode, press

➔

Contacts

➔

Memory

Info

The

Memory Info Contacts

screen appears in the display

showing the

Tot al

amount of memory in your phone, the

amount of memory

Used

to store Contacts entries, and

the remaining (

Free

) for Contacts entries.

Page 47

@Metro 44

Section 7: @Metro

With Mobile Shop, you can download full featured applications over the air including games, personalized ring tones, pictures, and more. You can send and receive instant messages and email, or browse the web to catch up on all the latest news.

This section outlines how to obtain games and other applications for your phone. For more information, contact your Wireless Carrier.

Launching @Metro

1. In standby mode, do one of the

following to launch @Metro:

•

Press Right navigation key (@Metro shortcut).

•

Press

@metro

soft key.

•

Press

➔

@Metro

➔

@Metro

The @metro menu appears in the display as shown.

Applications Shopping and Downloading (Mobile Shop)

Download games, ring tones, e-mail, and more using Mobile Shop.

Note:

For information on airtime charges, contact your Wireless Carrier.

1. At the @metro menu, highlight

MobileShop

( ), then

press .

Note:

The first time you access Mobile Shop, “

Browsing online and downloading

apps may incur network usage charges

” appears in the display along with

instructions on how to remove this message.

Your phone takes a moment to connect, then the Mobile Shop Catalog menu appears in the display.

Follow the instructions in your phone’s display.

Please check with your Wireless Carrier for availability of applications.

Changing Your @Metro Settings

Use the

Settings

menu in Mobile Shop to manage, move, order

applications, and much more.

1. At the @metro menu, highlight

Settings

( ), then

press . The following options appear in the display:

• Order Apps

— Download applications over the network.

Page 48

• Move Apps

— Move previously downloaded applications between

available folders.

• Manage Apps

— View used and available memory.

• Main Menu View

— Select whether to view the main Mobile

Shop menu in a list or icon format.

•View Log

— View the Mobile Shop log, which displays information

about recent activity using Mobile Shop.

2. Highlight the desired option.

3. Press to enter the option’s sub-menu and view or

change settings.

Using On-line Help

The Help sub-menu within @metro is a short tutorial on several @metro-Mobile Shop features. View information about charges, cancelling subscriptions, buying apps, disabling apps, and more.

1. At the @metro menu, highlight the Help ( ) icon.

2. Press . The Help subjects described in the following

subsections appear in the display.

3. Highlight the desired Help subject.

4. Press to view the selected Help information.

Buying New Apps

To buy new and exciting apps, visit the MobileShop catalog. It provides you with a variety of apps you can choose from.

What do I pay?

When you buy an app, you will be charged for the purchase cost of the app and the network connections to download it.

Demo Apps

A Demo app is free and is designed to demonstrate the app’s main features. It usually expires after a certain period of time or a number of uses and often has limited functions. When you run a demo app, you will be presented with a purchase option so you won’t have to look for the app in the MobileShop catalog.

Removing Apps

You may remove apps that are no longer needed. When you remove an app, you cannot use the application unless you purchase it again. To remove an app, choose Settings > Manage Apps. Then, select the app you want to remove.

Disabled Apps

You can install new apps even if the memory of your phone is full by partially removing (disabling) apps you haven’t used recently. When you need to use a disabled app, you can restore it at no additional purchase cost.

Page 49

@Metro 46

Restoring Apps

Disabled apps can be quickly restored at no additional purchase cost. To restore an app, run the application you want to restore from the Main Menu. You will be guided through the restoration process.

Expired Apps

Apps that were purchased based on the number of uses or time expire. You can purchase additional uses from the MobileShop catalog.

Page 50

Section 8: Messages

This section explains how to send or receive different types of messages. This section also describes the features and functionality associated with messaging.

Types of Messages

Your phone is able to send and receive Text messages to compatible phones and devices. Text messages can be up to 160 characters in length.

Note:

Available memory is shared between all messages. You can store up to 100 messages. However, the exact number is dependent upon message length.

Create and Send Text Messages

1. In standby mode, press the Down navigation key. The

Create Text Msg

screen appears in the display showing

the

To:

list.

Tip:

To l a u nch t he

Create Txt Msg

screen using a voice command — In standby

mode, press and hold until the phone prompts, “

Say a command.

” Say

“

Send Text

” into the microphone. You are then prompted to say a Contact

name or a number for the first recipient of the message.

2. Enter the phone number or e-mail address of the

recipient, then press . The

Tex t:

field appears in the

display.

3. Enter the text content of your message using the

keypad. (For more information, refer to “Entering Text” on page 27.)

At any point while composing a message:

•

Press the Left soft key ( ) to change the text entry mode. The following text entry options appear in the display:

–

T9 Word

–

Abc

–

ABC

–

123

–

Symbols

–

Add T9 Word

•

Use the Up and Down navigation keys to highlight the desired option, then press .

4. Press the

Options

to complete the message text and set message send options. The following options appear in the display:

• Edit Send To

— Edit the recipient’s number or email address.

• Add Quick Text

— Insert pre-composed text in your message.

•Save As Draft

— Save the message to your Draft folder.

• Priority Level

— Choose

High

Normal

Page 51

Messages 48

• Validity Period

— Enter the Date when this message will cease to be valid, then use the Left and Right navigation keys to choose the Time.

• Delivery Ack

— Choose On or

Off

— Requests confirmation

when your message is received.

• Add To Contacts

— Save the recipient’s number or e-mail

address as a Contacts list entry.

5. Once you’re finished entering your message, press

SEND

Receive Text Messages

When you receive a message in standby mode, the ringer sounds (unless turned off) and

New Message

appears in the display along with the closed envelope icon ( ). The date and time of the message also appear in the display along with the following options:

•

View Now

— Opens the message, where you have the option to Forward, Reply With Copy, Save Quick Text, Lock, Add To Contacts, Message Info, and Extract.

•

View Later

— Saves the message to your Inbox, where you can view

it later, then returns your phone to standby mode.

Highlight your choice, then press .

Receive Messages While in a Call

When you receive a message while in a call, New Message appears in the display along with the closed envelope icon

( ). The date and time of the message also appear in the display along with the following options:

•

View Now

— Opens the message, where you have the option to Forward, Reply With Copy, Save Quick Text, Lock, Add To Contacts, Message Info, and Extract.

•

View Later

— Saves the message to your Inbox, where you can view

it later, and returns your phone to call mode.

Highlight the desired option, then press .

View a Text Message Now

1. After you select the

View Now

option, the new text

message appears in the display.

2. While viewing your message press

Options

. The

following options appear in the display:

•Forward

— Send a copy of this message to another recipient.

• Reply With Copy

— Compose and send a reply message to the originator of the received message and include a copy of the original message.

•Save Quick Text

— Save the text in this message as a new Quick

Tex t.

•Lock

Unlock

— Block/permit erasure of the highlighted

message.

•Add To Contacts

— Save the sender’s number to your Contacts.

•Message Info

— Shows message delivery status, addressee,

size, and so on.

•Extract

— Calls originator of this message.

Page 52

Highlight an option, then press to perform the function for the highlighted option.

Note:

For more information on received message options, see “Inbox” on page

49.

View a Text Message Later

1. From the

Messages

menu, select

Inbox

. The Inbox

appears in the display.

2. If the new text message is not highlighted, use the Up

and Down navigation keys to highlight the new message.

3. Press . The new text message appears in the

display.

Message Boxes

Your phone stores messages in any one of five message boxes. The subsections that follow describe each message box in detail.

Inbox

Received messages of all types (except Voicemail) are stored in the Inbox.

1. From the

Messages

menu, select

Inbox

. A list of

incoming messages appears in the display.

Tip:

While in a call, press

Options

, then select

Message

to open the

Messages

menu.

2. Use the navigation keys to highlight the message that

you wish to view.

3. Press to view contents of the highlighted message.

4. While viewing your message press

Options

. The

following options appear in the display:

•Forward

— Send a copy of this message to another recipient.

• Reply With Copy

— Compose and send a reply message to the originator of the received message and include a copy of the original message.

•Save Quick Text

— Save the text in this message as a new Quick

Tex t.

•Lock

Unlock

— Block/permit erasure of the highlighted

message.

•Add To Contacts

— Save the sender’s number to your Contacts.

•Message Info

— Shows message delivery status, addressee,

size, and so on.

•Extract

— Calls the sender of the received message.

5. Use the Up/Down navigation keys to highlight an option.

Press to perform the function for the highlighted option.

Managing Inbox Messages

1. From the

Messages

menu, select

Inbox

. A list of

Page 53

Messages 50

incoming messages appears in the display.

2. Highlight a message in the list.

3. Press

Erase

to remove the highlighted message from the

Inbox.

4. Press

Options

. The following options appear in the

display:

•Reply

— Compose and send a reply message to the originator of

the received message.

• Reply With Copy

— Compose and send a reply message to the originator of the received message and include a copy of the original message.

•Forward

— Send a copy of this message to another recipient.

•Lock

Unlock

— Block/permit erasure of the highlighted

message.

• Add To Contacts

— Save the sender’s number to your Contacts.

• Erase Inbox

— Delete all unlocked messages from the Inbox.

•Message Info

— Shows message delivery status, addressee,

size, and so on.

5. Highlight an option, then press to perform the

function for the highlighted option.

Outbox

Your phone stores messages in the Outbox, regardless of whether the message was successfully transmitted. Verify if and when a message or E-Mail was successfully received by enabling the Delivery Ack feature.

Review Messages in the Outbox

1. From the

Messages

menu, select

Outbox

. Your list of

sent messages appear in the display.

2. Highlight a message that you wish to review, then press

OPEN

3. While viewing your message press

Options

. The

following options appear in the display:

•Forward

— Send the highlighted message to another recipient.

•Save Quick Text

— Save the message text as Quick Text for

insertion into other messages.

•Lock

Unlock

— Block/permit erasure of the highlighted

message.

•Add To Contacts

— Save the recipient’s number to your

Contacts.

•Message Info

— Shows message delivery status, addressee,

size, and so on.

•Extract

— Calls recipient of this message.

4. Highlight an option, then press to perform the

function for the highlighted option.

Messages and Lock Mode

Your phone can still receive messages while in Lock Mode. The time and date of the message appear in the display, but you cannot access the message until you enter the lock code.

Page 54

Managing Outbox Messages

1. From the

Messages

menu, select

Outbox

. Your list of

sent messages appear in the display.

2. Highlight a message, then press

Erase

to remove the

highlighted message from the Outbox.

3. Press

Options

. The following options appear in the

display:

•Forward

— Send the highlighted message to another recipient.

• Resend

— Re-send the highlighted message to the original

recipient.

•Lock

Unlock

— Block/permit erasure of the highlighted

message.

• Add To Contacts

— Save the recipient’s number to your

Contacts.

•Erase Outbox

— Delete all unlocked messages from the Outbox.

•Message Info

— Shows message delivery status, addressee,

size, and so on.

4. Highlight an option, then press to perform the

function for the highlighted option.

Draft Box

Messages in the Draft Box are those that have been composed but never sent. You can return to the Draft Box at any time to view, edit, or send a draft message.

Create a Draft Message

1. In standby mode, press the Down navigation key. The

Create Text Msg

screen appears in the display showing

the

To:

list.

2. Enter the phone Number or E-Mail address of a

recipient, then press .

3. Compose your message using the keypad, then press

Options

4. Select

Save As Draft

. A confirmation message appears in

the display and your message is saved to the Drafts box.

View and Edit Draft Text Messages

1. From the

Messages

menu, select

Drafts

. A list of any draft messages that you’ve saved appears in the display.

2. Highlight a text message that you wish to view or edit,

then press

EDIT

. The message text edit screen appears

in the display.

3. Enter or change the recipient’s number and/or e-mail

address and the message text using the keypad. (For more information, refer to “Entering Text” on page 27.)

4. Press

Options

to complete the message text and set message send options. The following options appear in the display:

Page 55

Messages 52

• Edit Send To

— Change, add, or remove recipients from this

message.

• Add Quick Text

— Insert pre-composed text into your message

text.

•Save As Draft

— Save the message to your Drafts box.

• Priority Level

— Choose

High

Normal

• Validity Period

— Enter the Date when this message will cease to be valid, then use the Left and Right navigation keys to choose the Time.

• Delivery Ack

— Choose On or

Off

— Requests confirmation

when your message is received.

• Add To Contacts

— Save the recipient’s number or e-mail

address to your Contacts.

5. Highlight the desired option, then press to perform

the function for the highlighted option.

6. When you have completed composing your message,

press

SEND

Managing Draft Messages

1. From the

Messages

menu, select

Drafts

. A list of any draft messages that you’ve composed appears in the display.

2. Highlight a message.

3. To remove the highlighted message from the Drafts box,

press

Erase

. You are prompted to confirm erasure of the

highlighted draft message.

•

To erase this draft message, press

Ye s

•

To keep this draft message in your Drafts box, press No.

4. For other options, press

Options

. The following options

appear in the display:

•Send

— Send the highlighted message to the original recipient, if the recipient’s number and/or e-mail address is included with the draft message.

•Lock

Unlock

— Block/permit erasure of the highlighted

message.

•Add To Contacts

— Save the recipient’s number and/or e-mail

address to your Contacts.

•Save Quick Text

— Save the message text as Quick Text for

insertion into other messages.

• Erase Drafts

— Delete all unlocked draft messages.

5. Highlight an option, then press to perform the

function for the highlighted option.

Voicemail

Messages in your voice mailbox are logged in the Voicemail box of the Messages menu. Open the Voicemail box to view the Callback # (if available), Urgency, and other details of the Voicemail message.

Listen to Voicemail Now

Once you’ve received a new voicemail message, you have the option to either:

Page 56

•

Listen Now

— Calls your voice mailbox and allows you to listen to

your messages.

•

Listen Later

— Returns you to standby mode where you can later

choose to call your mailbox and review your messages.

Highlight the desired option, then press .

Listen to Voicemail Later

If you choose to review your voicemail messages at a later time:

1. In standby mode, press the Up navigation key, then

select

Voicemail

. The

View Contact

screen appears in the

display.

2. Press to call your voice mailbox and listen to the

message.

Note:

You can also press and hold to dial your voice mailbox.

Erase Messages

Using Erase Messages, you can erase all of the messages in each of your boxes from one convenient location.

Note:

This function erases all messages in a selected box. To delete a single message, open the box from the

Messages

menu, highlight a message, open

the message if you want, then press

Erase

to delete it.

1. In standby mode, press

➔

Messages

➔

Erase

Messages

. The following options appear in the display:

• Inbox

— Deletes all unlocked messages stored in the Inbox.

•Outbox

— Deletes all unlocked messages stored in the Outbox.

• Drafts

— Deletes all unlocked messages stored in the Drafts box.

•All Messages

— Deletes all unlocked messages stored in all of

the message boxes, except Voicemail.

2. Highlight the box containing the messages that you wish

to delete, then press . You’re prompted to confirm the erasure of all messages in the selected box or in all boxes.

3. Press

Yes

to delete the messages. Press No to cancel

deleting the messages.

Message Settings

Use the

Msg Settings

sub-menus to define general settings and

text message settings.

Page 57

Messages 54

General Message Settings

1. In standby mode, press

➔

Messages

➔

Msg

Settings

➔

General

. The following options appear in the

display:

•Auto Save

— Choose whether your messages are saved

automatically when you exit them (On,

Off, Prompt

• Auto Erase

— Choose to receive (On) or not receive (

Off

) a

warning message when you delete a message.

•Quick Text

— Edit your pre-composed messages, which can then

be inserted into new messages.

• Voicemail #

— Edit or view your Voicemail number.

• Entry Mode

— Choose the default method for entering text into

messages (

T9 Word, Abc, ABC, 123

• Callback #

— Choose whether to include a callback phone number with your outgoing messages, and enter the number to be included.

• Reminder

— Select whether and how often you will hear and/or

feel a reminder that you have received a message (

Once, Every 2

Minutes, Every 15 Minutes, Off

2. Highlight the desired option with the Navigation key.

3. Press to enter the highlighted option’s sub-menu.

Editing and Entering Quick Text

1. In standby mode, press

➔

Messages

➔

Msg

Settings

➔

General

➔

Quick Text

. The

Quick Text

sub-

menu appears in the display.

2. To create a new Quick Text:

•

Press

New

Tip:

You can also create new Quick Text by viewing/editing an Outbox or Drafts message and using the

Save Quick Text

option in the

Options

menu. (For more

information, refer to “Review Messages in the Outbox” on page 50.)

•

Enter/change the text content of your Quick Text using the keypad. (For more information, refer to

“Entering Text”

on page 27.)

–

To change Text Input Mode, press the Left soft key.

•

Once you’re finished entering your Quick Text, press OK. The Quick Text menu appears in the display with your new Quick Text highlighted.

3. To change a Quick Text:

•

Highlight a Quick Text you want to change, then press

EDIT

. (You cannot change the pre-defined Quick Text included with your phone.)

Note:

You cannot change or erase pre-loaded Quick Texts.

•

Enter/change the text content of your Quick Text using the keypad. (For more information, refer to

“Entering Text”

on page 27.)

Page 58

To erase a Quick Text:

•

Highlight a Quick Text you want to erase, then press

Erase

. You are

prompted to confirm erasure of the highlighted Quick Text.

•

To erase the highlighted Quick Text, press

Ye s

. To keep it, press No.

Text Message Settings

1. In standby mode, press

➔

Messages

➔

Msg

Settings

➔

Text Message

. The following options appear

in the display:

•Auto View

— On/

Off

— With Auto View On, the full content of a

text message appears in the display as the messages is received.

• Signature

— Create a signature, which can be included at the

bottom of outgoing message text.

•Auto Scroll

— On/

Off

— With Auto Scroll On, the full content of a text message automatically rolls upward on the display, one screenfull at a time.

2. Highlight the desired option with the Navigation key.

3. Press to enter the highlighted option’s sub-menu.

Picture Message Settings

1. In standby mode, press

➔

Messages

➔

Msg

Settings

➔

Picture Message

. The following options

appear in the display:

• Auto Receive

— On/

Off

— With Auto Receive On, the full content of a picture message appears in the display as the messages is received.

2. Highlight the desired option with the Navigation key.

Page 59

MetroWEB 56

Section 9: MetroWEB

This section outlines how to launch MetroWEB, how to navigate to other pages on the web, and how the keys on the keypad are used with the web application. Additionally, links to other sites are briefly discussed.

MetroWEB

With MetroWEB, you can conveniently surf the web and download ringtones and wallpapers using your phone. Each time you launch MetroWEB, your phone connects to the Internet and the service indicator icon ( ) appears in the display.

Stored Web Content

MetroWEB ends an Internet connection after a certain period of inactivity, however some information from your session remains stored in the phone (if you leave your phone turned on). You can access this information without reconnecting to the Internet. However, if you are viewing stored information, and you select a link to a site that was not accessed in your last session, you automatically re-connect to the Internet.

Launching MetroWEB

1. In standby mode, do one of the following to launch

MetroWEB:

•

Press the Left navigation key (MetroWEB shortcut key).

•

Press

➔

MetroWEB

➔

Get In Web

A list of categories (each representing one or more web sites) appears in the display.

2. Use the navigation keys to browse the categories.

3. Once the desired category is highlighted, press to

enter the category list.

Exit MetroWEB

䊳

To exit MetroWEB, press .

Using MetroWEB

When you use MetroWEB, some of the keys operate differently than during a normal phone call. MetroWEB presents on-screen items in any of the following ways:

•

Text or numeric input.

•

Links (embedded in content).

•

Numbered options (some may not be numbered).

•

Simple text.

You can act upon options or links by using the soft keys.

Page 60

MetroWEB soft keys

At the bottom of the MetroWEB display is a bar that contains browser commands. The Left and Right soft keys are used to execute the browser commands that appear in their respective corners of the display.

Using Links

Links have several purposes, such as jumping to a different page, to a different site, or even initiating a phone call. Links are shown inside of brackets ([ ]). You can normally use the Left soft key ( ) to select a link when it is highlighted.

How MetroWEB Keys Work

The following table lists MetroWEB keys and their functions.

•

Navigation key

— Use to browse lists and options

•

Back Key

— A browse, back-up key. Press once to back up one page. Press and hold to go back to home page. Press to clear the last number, letter, or symbol entered. Press and hold to completely clear the text display.

•

SHIFT Key

— Press before entering text to enable

uppercase characters.

•

Space Key

— Press to insert a space when entering text.

• Number 1 thru 0 — Use the number keys to select items

in a menu if they are numbered.

•

End Key

— Press to exit the MetroWEB and return the

phone to standby mode.

•

Left Soft Key

— Press to activate the command that

appears above it in the display.

•

Right Soft Key

— Press to activate the command that

appears above it in the display.

Page 61

Voice SVC 58

Section 10: Voice SVC

This section explains how you can use and customize your phone’s VoiceSignal voice recognition feature.

Voice SVC Options

Your Byline phone includes VoiceSignal, state-of-the-art voice recognition software that lets you use your voice to dial numbers, access your Contacts list, and open Tools. To access your phone’s voice recognition, do the following:

1. In standby mode, press the

➔

Voice SVC

. The

following options appear in the display:

• Voice Commands

— Lets you place calls, access your Contacts List, review your appointments, and more by speaking commands into your phone. (Also see

“Voice Dialing”

on page 18 and see

“Voice Method”

on page 31 for more information.)

• Voice Settings

— Lets you tailor VoiceSignal to better respond to your voice and your phone use preferences. (For more information, refer to

“Digit Dialing”

on page 60.)

2. Highlight the desired sub-menu, then press .

Voice Commands

1. To access the Voice Commands menu, do one of the

following:

•

In standby mode, press and hold the key.

•

In standby mode, press

➔

Voice SVC

➔

Voice

Commands

Note:

You can also set your phone to start VoiceSignal when you open the flip or connect an optional headset to the phone. (For more information, refer to “Voice Launch” on page 62.)

“

Say a Command

” appears in the display and is pronounced through the earpiece, followed by a list of available commands:

•Call

— Lets you dial the phone by saying any name stored in your contact list, without ever having to record, or “train” that name. VoiceSignal automatically voice-activates all your contacts, even if you have hundreds of them stored on your phone. You can also dial any telephone number, even if it is not stored in your contact list, by saying the digits in the number. (For more information, refer to

“Voice Dialing”

on page 18.)

• Send Text

— Lets you access Create Text Message.

• Lookup

— Lets you find a Contact by name and review the

Contact’s information.

•Go to

— Lets you access the following list of your phone’s features

and functions:

–

Contacts

–

Calls

–

Messages

Page 62

–

@metro

–

MetroWeb

–

VoiceSVC

–

My Contents

–

Too ls

–

Settings

• Check

— Lets you say a single command (such as “

Status

”) to

verify your phone's:

Status, Signal, Network, Battery

, or

phone #

2. Speaking clearly, say the command that you want to

use.

If VoiceSignal does not recognize a command, it prompts you to repeat the command.

If VoiceSignal still does not recognized the command, it tells you “

No match found

” and offers you the option of

selecting

Settings

Repeat

before canceling voice

recognition.

Voice Command Tips:

•

Make sure you wait for the beep before speaking.

•

Speak clearly at a normal volume, as if you were talking on the phone.

Voice Settings

Choice Lists

When VoiceSignal cannot recognize a name or number, it displays a choice list of up to three possible choices, and prompts you to confirm the correct one.

You can select how VoiceSignal will use choice lists with name dialing, digit dialing, and contacts.

To change the way VoiceSignal uses choice lists:

1. In standby mode, press

➔

Voice SVC

➔

Voice

Settings

➔

Choice Lists

2. Highlight the Choice List behavior you prefer:

•Automatic

— VoiceSignal displays a choice list only when it is not

sure if it has correctly recognized the name or number.

•Always On

— VoiceSignal always displays a choice list, even

when there is only one choice.

•Always Off

— VoiceSignal never displays a choice list.

3. Press

or to accept the new setting. Press

to discard the new setting and return to the

Voice

Settings

menu.

Sensitivity

1. In standby mode, press

➔

Voice SVC

➔

Voice

Settings

➔

Sensitivity

Page 63

Voice SVC 60

Use the Up and Down navigation keys to adjust the selected Sensitivity setting incrementally between

Reject More

spoken commands or names and

Reject

Less

spoken commands or names.

3. Press

or to accept the new setting. Press

to discard the new setting and return to the

Voice

Settings

menu.

Digit Dialing

If you regularly have trouble with VoiceSignal not recognize the numbers you say, try adapting digit dialing to your voice. Adapting can improve the accuracy of digit recognition, especially for people with strong regional accents.

Note:

After you adapt Digit Dial, your phone is customized to your voice, and your voice only. Others will not be able to use it unless they reset the phone to factory defaults.

Adaptation involves recording several sequences of four digits each. The recording process takes about a minute.

Tips for Adapting Digit Dialing:

•

Use Adapt Digits in a quiet place.

•

Make sure you wait for the beep before starting to speak.

•

Speak clearly, and say each digit distinctly.

•

If you make a mistake while recording a sequence of digits, or if there is an unexpected noise that spoils the recording, re-record that sequence.

•

Only adapt digits if you are regularly having problems with digit dialing. Once you adapt, digit dialing will not work as well for other people using your phone. (You can always reset digit adaptation to its original state, as described below.)

Adapt Digits

To adapt digit dialing, do the following:

1. In standby mode, press

➔

Voice SVC

➔

Voice

Settings

➔

Digit Dialing

. The following options appear in

the display:

• Adapt Digits

•Reset Digits

2. Use the Up/Down navigation keys to highlight

Adapt

Digits

, then press the

Select

soft key. Your phone

displays text describing the Adapt Digits process.

3. Press the key. Your phone displays the first digit

sequence and “

Please say

” plays through the speaker

followed by the four digits appearing in the display.

4. Wait for the beep and say the digits using your normal

tone of voice. After a moment, the phone plays back the recording and prompts “

Did the recording sound ok?

”

•

If the recording was good, say “

Yes

.”

Page 64

•

If you need to re-record, say “No.”

If you say “No,” the phone prompts you to pronounce the digits again. Wait for the beep and then say the digits.

Repeat this step until you’re satisfied with the recording.

5. After confirming that the recording sounds “ok”,

continue the recording process with the next set of digits.

6. After 10 sets of digits, the phone asks whether you want

to do more adaptation. Answer “

Yes

.”

7. Repeat steps 4 and 5 for another 10 sets of digits. After

the second group of 10 sets of digits, “

Adaptation

complete

” plays through the speaker and you are

returned to the

Digit Dialing

menu.

Reset Digits

To reset digit dialing to factory default settings, do the following:

1. In standby mode, press

➔

Voice SVC

➔

Voice

Settings

➔

Digit Dialing

. The following options appear in

the display:

• Adapt Digits

• Reset Digits

2. Highlight

Reset Digits

, then press . The phone

prompts you to confirm digit reset.

3. Press

or to reset your digit adaptation, or press

Back

or to cancel.

Sound

Sound lets you specify what (if any) text prompts you want your phone to read to you through the earpiece.

1. In standby mode, press

➔

Voice SVC

➔

Voice

Settings

➔

Sound

. The following options appear in the

display:

•Prompts

— On/Off — Enables or disables audio prompts.

•Digits

— On/Off — Enables or disables digit playback.

•Names

— On/Off — Enables or disables name playback.

• Name Settings

— Lets you adjust the

Speed

(Faster or Slower)

and

Volume

(Louder or Softer) of your phone’s audio name

playback.

2. Highlight the desired option, then press .

3. Highlight the desired setting.

4. Press

or to accept the new setting. Press

to discard the new setting and return to the

Voice

Settings

menu.

Page 65

Voice SVC 62

Voice Launch

To set the key or action that launches VoiceSignal, do the following:

1. In standby mode, press

➔

Voice SVC

➔

Voice

Settings

➔

Voice Launch

. The following options appear

in the display:

• Key Only

— Press and hold to activate VoiceSignal for one

call.

• Key/EarMic

— Attach a headset to your phone. Press and hold

or press and hold the button on the headset to activate

VoiceSignal.

•Key/Flip

— Open the flip or press and hold to activate

VoiceSignal.

2. Highlight the option you want.

3. Press

or to accept the new setting. Press

to discard the new setting and return to the

Voice

Settings

menu.

About

This option causes the About VoiceSignal screen to appear in the display, showing version and build information about the VoiceSignal software included on your phone.

䊳

In standby mode, press

➔

Voice SVC

➔

Voice

Settings

➔

About

The

About VoiceSignal

screen appears in the display showing the version level of the VoiceSignal software currently installed on your phone.

Page 66

Section 11: My Contents

This section details access to and use of the folders on your phone where preloaded and downloaded images, ringtones, and sound files are stored.

Note:

For more information about downloading images, ringtones, and sound files, contact your Wireless Carrier.

My Images

My Images lets you manage images you download, and lets you choose the images that appear in your phone’s display when you turn it on or off, while in standby mode (wallpaper), and as image IDs for your contacts.

1. In standby mode, press

➔

My Contents

➔

Images

. A multiple-page matrix of thumbnail views of

saved photos and images appears in the display.

2. Highlight an image.

3. Press the

VIEW

key to expand the highlighted image to

fill the screen.

Press the

Options

soft key. The following options appear

in the display:

•

Set As

— Lets you set the highlighted image as the Main

Wallpaper or as a Picture ID for one of your Contacts.

•

Rename

— Change the file name for the highlighted image.

•

Lock

Unlock

— Block/permit erasure of the highlighted image.

•

Erase

— Erase the highlighted image.

•

Erase All

— Erase all unlocked images from My Images.

•

Photo Info

— Shows the image file’s name, date and time,

resolution, and size.

4. Highlight an option, then press .

5. Press to return to the

My Contents

menu, or

press to return to standby mode.

My Ringtones

My Ringtones lets you assign ringtones for calls, alarms, and other alerts.

1. In standby mode, press

➔

My Contents

➔

Ringtones

. A list of ringtones appears in the display.

2. Use the Navigation key to highlight a ringtone.

3. Press

Set As

to assign the highlighted ringtone to be

used as a

Ringtone, Contact ID

, or as an

Alert Tone

Press

PLAY

to hear the ringtone.

Press

Options

. The following options appear in the

display:

•Lock

Unlock

— Block/permit erasure of the highlighted ringtone.

Page 67

My Contents 64

•Erase

— Erase the highlighted ringtone.

•Rename

— Change the file name for the highlighted ringtone.

• Ringtone Info

—

Shows the title, size, type, and date for the file.

• Send Via Bluetooth

— Send the file via Bluetooth.

4. Press to return to the

My Contents

menu, or

press to return to standby mode.

My Sounds

My Sounds lets you record and manage voice memo files and assign melodies as ringers or alerts.

1. In standby mode, press

➔

My Contents

➔

Sounds

The following options appear in the display:

• Record New

— Lets you record voice memos.

•

A list of recorded voice memo files and melodies.

2. Use the navigation keys to highlight a file.

3. When you highlight

Record New

and press , the

Record New

screen appears in the display.

•

Press

REC

to start recording a voice memo.

•

Press

Pause

to pause/resume recording.

•

Press

SAVE

to stop recording and save the voice memo.

4. When you highlight a saved voice memo file, you have

the following options:

•

Press

Erase

to erase the selected voice memo file, if it is unlocked.

•

Press

PLAY

to listen to the voice memo.

•

Press

Options

, and the following options appear in the display:

–

Send

— Send the file via Bluetooth.

–

Set As

— Set the file as your Ringtone, Contact ID, or Alert Tone.

–

Rename

— Change the name of the voice memo file.

–

Lock

Unlock

— Block/permit erasure of the highlighted image.

–

Erase all

— Erase all unlocked voice memos.

–

Sound Info

— Shows the title, size, type, and date for the file.

5. When you highlight a melody file, you have the following

options:

•

Press

PLAY

to hear the ringtone.

•

Press

Options

to show the following options:

–

Set As

— assign the highlighted ringtone to be used as a

Ringtone, Contact ID

, or as the

Alert Tone

–

Erase all

— Erase all unlocked melodies.

–

Sound Info

— Shows the title, size, type, and date for the file.

6. Press to return to the

My Contents

menu, or

press to return to standby mode.

Page 68

Section 12: Tools

This section explains how you can use your phone’s Personal Information Manager (PIM) functions to view today’s calendar, schedule appointments, set an alarm, perform simple math calculations, and more.

Accessing Your Phone’s Tools

To launch the Tools menu:

䊳

In standby mode, press

➔

Too ls

. The

Tools

appears in the display.

Bluetooth

Bluetooth is a short-range wireless communications technology capable of exchanging information over a distance of about 30 feet without requiring a physical connection.

Unlike infrared, you don't need to line up the devices to beam information with Bluetooth. If the devices are within a range of one another, you can exchange information between them, even if they are located in different rooms.

The Bluetooth wireless technology settings menu provides the ability to view and change the device name, show the visibility, and set the security for the device.

Turn Bluetooth On/Off

When the Bluetooth is turned on, you can use the Bluetooth features available. When the Bluetooth is turned off, you cannot send or receive information via Bluetooth. To save battery life or in situations where Bluetooth use is prohibited, such as airline traveling, you can turn off the Bluetooth wireless technology headset.

Add New Device

To search for available Bluetooth devices:

1. From the

Tools

menu, select Bluetooth. The Bluetooth

screen appears in the display showing the following

options:

• Add New Device

•Registered List

• Bluetooth Settings

2. Highlight

Add New Device

and press .

3. “Place device you are connecting to in discoverable mode”

appears in the display.

4. Place the Bluetooth device in discoverable mode. (See the

device user manual for more information.)

Page 69

Tools 66

Press .

Note:

If Bluetooth is off, it automatically turns on.

Your phone searches for available Bluetooth devices.

Named icons for available devices appear in the display.

Note:

When more than 5 devices are detected, additional icons are placed on additional

Bluetooth

screen pages.

6. Identify the device you want to pair with your phone by

selecting an icon.

7. Press to pair the selected device with the phone. You

are prompted to enter the passkey or PIN for the selected

device.

8. Enter the device passkey or PIN and press . (See the

device user manual for more information.)

Note:

If you are pairing and connecting to another phone or to a personal computer, both devices prompt for a passkey or PIN. To successfully pair and connect your phone with the other device, the same passkey or PIN must be entered on both devices.

Registered List

The Bluetooth screen shows the icons for Bluetooth wireless technology devices paired with your handset.

1. From the

Tools

menu, select Bluetooth ➔ Registered

List. Icons for registered Bluetooth devices appear in the

display.

Connecting to a Bluetooth Device

From the Registered List,

1. Highlight the device and press .

2. If you are unable to connect with the device a pop-up

appears in the display. Press the

Yes

soft key to retry.

Disconnecting from a Bluetooth Device

From the Registered List,

䊳

Highlight the device and press the

Off

soft key.

Managing Your Registered List

1. Highlight a device and press the

Options

soft key. The

following options appear in the display:

•

Remove Device

— Deletes the device. from the Registered List.

•

Rename Device

— Lets you change or replace the device name.

Page 70

•

Device Info

— Shows the device name, Type of device, Status,

Address, Pairing Date, the time of Last Connection.

2. Select the desired option.

Bluetooth Settings

1. From the

Tool s

menu, select Bluetooth ➔ Bluetooth

Settings. The Settings screen appears in the display

showing the following options:

• Enable/Disable

— Select to turn Bluetooth on or off.

• Discovery Mode

— Allows other Bluetooth devices to see your device as accessible. Select On for other devices to see your device, or

Off

for no visibility.

• Device Name

— Shows the Bluetooth Address of your phone. You

may change this name. Enter the text and press

• Supported Profiles

— Shows which devices are available:

–

Headset

— Supports use of a compatible Bluetooth headset for

mono voice.

–

Handsfree

— Supports Bluetooth headsets, and may also support other installed compatible Bluetooth devices with speakerphone capabilities.

–

Object Push

— Allows sending and receiving of contact name

cards between devices.

–

File Transfer

— Allows the capability to send or receive non-

protected data files to a compatible Bluetooth device.

• Device Info

— Shows the Bluetooth Type, Status, and Address of

your phone.

2. Select the desired option.

Calendar

Calendar allows you to view the current, past, or future month in calendar format. While viewing the calendar, the current date is highlighted, and days with scheduled events are surrounded by a box.

Navigating the Calendar

1. From the

Tools

menu, select

Calendar

The calendar appears in the display with the current date highlighted. The month and year appear at the top of the display.

2. Use the following controls to highlight a date in the

Calendar screen:

• Left/Right navigation keys

— Move the highlighting back/

ahead one day per keypress.

• Up/Down navigation keys

— Move the highlighting back/ahead

one week per keypress.

• Up/Down volume keys

— Moves the date and screen back/

ahead one month per keypress.

Add a New Event

1. From the

Tools

menu, select

Calendar

Page 71

Tools 68

The calendar appears in the display with the current date highlighted. The month and year appear at the top of the display.

2. Navigate to a desired date. (For more information, refer

to “Navigating the Calendar” on page 67.)

3. Press

Add

. The

New Event

screen appears in the display

with the

Appointment Name

option highlighted.

4. Enter the

Appointment Name

using the keypad. (For

more information, refer to “Entering Text” on page 27.)

5. Use the Up/Down navigation keys to highlight the

following New Event options:

• Start Date

— Populated with highlighted Calendar date. To

change the date, use the keypad.

•Start Time

— Populated with the current time (rounded to the

nearest half-hour). To change the time, use the keypad.

–

Use the Left/Right navigation keys to select AM or PM.

• End Date

— Populated with highlighted Calendar date. To change

the date, use the keypad.

• End Time

— Populated with a time one half-hour later that

Start

Time

. To change the time, use the keypad.

–

Use the Left/Right navigation keys to select AM or PM.

•Alert

— Select

To ne

Vibrate

Light Only

using the Left/Right

navigation keys.

–

To select a particular Tone, use the Up/Down navigation keys to highlight the current Tone and press the Left/Right navigation key.

The

Alert Tone

menu appears in the display. (For more information,

refer to

“Ringer Type”

on page 80.)

• Reminder

— Select

Once

Every 2 Minutes

Every 15

Minutes

Off

using the

Left/Right navigation keys.

•Alert Time

— Select

15 Min. Before

30 Min. Before

1 Hour

Before

3 Hours Before

5 Hours Before

1 Day Before

Time

5 Min. Before

using the

Left/Right navigation keys.

6. To store this Event in your Calendar, press

SAVE

. An

alarm will notify you prior to the Event, if

Reminder

is set

to a value other than

Off

View/Change an Event

1. From the

Tools

menu, select

Calendar

A calendar appears in the display with the current date highlighted. The month and year appear at the top of the display.

2. Navigate to a desired date. (For more information, refer

to “Navigating the Calendar” on page 67.)

3. To open the highlighted date and show a list of Events,

press

VIEW

4. Highlight an Event to view, then press

VIEW

to display

the specifics of the highlighted Event.

5. To scroll the Event contents, use the Up/Down

navigation keys.

Page 72

To change the event details, press

Edit

. (For more

information, refer to “Add a New Event” on page 67.)

7. To return to the Events list, press .

8. For other options, press

Options

. The following options

appear in the display:

•Monthly

— Repeat this event monthly.

•Erase

— Remove this event from the Calendar.

9. Highlight an option. Press to invoke the highlighted

option.

Memo Pad

Create notes and store them in Memo Pad. Notes that you create in Memo Pad can’t be prioritized or assigned an alert. Return to Memo Pad anytime to review and edit your notes.

Create a Memo

1. From the

Tools

menu, select

Memo Pad

. A list of any

stored Memos appears in the display.

2. To add a Memo, press

Add

. A numbered

Memo

screen

appears in the display.

3. Enter Memo text using the keypad. (For more

information, refer to “Entering Text” on page 27.)

4. When you’re finished entering details for the Memo,

press . The Memo is saved.

5. To discard this Memo and return to the

Memo Pad

screen, press

Cancel

Review, Edit, and Erase Memos

1. From the

Tools

menu, select

Memo Pad

. A list of any

stored Memos appears in the display.

2. To review a Memo:

•

Highlight a Memo and press

VIEW

. The numbered

Memo

view

screen appears in the display.

•

Use the Up/Down navigation keys to scroll the Memo text.

3. To edit a Memo:

•

From the

Memo Pad

screen, highlight the Memo and press

Options

. The following options appear in the display:

–

Edit

— Change the currently highlighted Memo.

–

Erase

— Erase the highlighted Memo.

–

Erase all

— Erase all of the unlocked memos.

–

Lock

Unlock

— Prevent/allow erasure of the highlighted Memo.

Select

Edit

. The numbered

Memo

edit screen appears in the

display.

•

From the

Memo

view screen, press

Edit

. The numbered

Memo

edit screen appears in the display.

•

Use the keypad to change the Memo text. (For more information, refer to

“Entering Text”

on page 27.)

•

When you’re finished changing the Memo, press . The changed Memo is saved.

4. To erase a Memo:

Page 73

Tools 70

•

From the

Memo Pad

screen, highlight the Memo and press

Options

. The following options appear in the display:

–

Edit

— Change the currently highlighted memo.

–

Erase

— Erase the highlighted memo.

–

Erase all

— Erase all of the unlocked memos.

–

Lock

Unlock

— Prevent/allow erasure of the highlighted memo.

Select

Erase

. You are prompted to confirm the erasure.

•

From the

Memo

view screen, press

Options

. The following options

appear in the display:

–

Erase

— Erase the Memo you are viewing.

–

Add New Memo

— Add a new Memo to Memo Pad.

–

Lock

Unlock

— Prevent/allow erasure of the Memo you are

viewing.

Select

Erase

. You are prompted to confirm the erasure.

•

To erase the Memo, press

Ye s

. To keep the Memo, press No.

Alarm Clock

Your phone has three alarm clocks that you can set to go off once, or to recur daily at a specific time. Once set, an alarm clock is easy to change or turn off completely.

Note:

The Alarm Clock doesn’t function when the phone is turned off. If the time for an alarm that was set for Once has elapsed while the phone is off, the alarm occurs at the specified time on the next day.

Set an Alarm

1. From the

Tool s

menu, select

Alarm Clock

. The following

options appear in the display:

•Alarm 1

•Alarm 2

•Alarm 3

2. Highlight the alarm clock that you wish to set, then

press . The selected

Set Alarm

screen appears in the

display with the

Alarm

option highlighted and with the

current time showing above it.

3. Use the Up/Down navigation keys to highlight the

following Set Alarm options:

•Alarm

— Use the Left/Right navigation keys to select On or

Off

•Time

— Populated with the current time. To change the time, use

the keypad.

–

Use the Left/Right navigation keys to select AM or PM.

• Frequency

— Use the Left/Right navigation keys to select

Daily

Mon.–Fri.

Weekends

Once

• Ringer

— Select

To ne

Vibrate

Light Only

using the Left/Right

navigation keys.

–

To select a particular Tone, use the Up/Down navigation keys to highlight the current Tone and press the Left/Right navigation key. The

Alert Tone

menu appears in the display. (For more information,

refer to

“Ringer Type”

on page 80.)

4. When you’re finished entering the time and frequency

for the alarm, press

SAVE

. If the Alarm is set to On, the

alarm icon ( ) appears in the top of the display.

Page 74

When an Alarm Sounds

An animated alarm clock appears in the display and an alert sounds when the specified time for the alarm arrives.

•

To silence the alarm, press .

•

If the alarm was set as a

Daily

alarm, the alarm icon remains in the top

of the display.

•

If the alarm was set as a

Once

only alarm, the alarm icon disappears

from the top of the display.

Turn Of f an Alarm

1. From the

Tools

menu, select

Alarm Clock

. The following

options appear in the display:

•Alarm 1

•Alarm 2

•Alarm 3

2. Highlight the Alarm you wish to turn off, then press

Options

. The following options appear in the display:

•Off

— Disables the highlighted Alarm and retains the current

settings.

•Reset Alarm

— Disables the highlighted Alarm and resets the

Alarm settings to default values.

•Reset All

— Disables all Alarms and resets all Alarm settings to

default values.

3. Highlight the desired option and press . The selected

Alarm(s) is(are) turned off.

World Time

World Time lets you view the time of day or night in any of the 24 different time zones around the world.

Note:

To us e

World Time

, you need to subscribe to your Wireless Provider’s digital

service.

1. From the

Tools

menu, select

World Time

. A world map

appears in the display.

Page 75

Tools 72

Use the Left/Right navigation keys to browse cities and their current times. The following cities are supported.

3. Do one of the following:

•

Press to set the selected city/time zone as the default time zone for your phone.

•

Press to return to the

Tools

menu.

Enable Daylight Savings Time (DST)

1. While viewing the World Time map, press the

Options

soft key.

DST Off

DST On

pops-up in the display.

2. Press to accept the highlighted setting. If the DST

icon ( ) appears in the display, it indicates that Daylight Savings Time is enabled.

Calculator

You can perform calculations, including addition, subtraction, multiplication and division using your phone.

1. From the

Tools

menu, select

Calculator

. The Calculator

screen appears in the display.

2. Enter the first number in your equation using the

keypad. (Numbers can be up to 9 digits long, and can include a decimal point followed by up to 2 more digits.)

•

Press to enter a decimal point.

•

Press to change the sign for a number to a negative.

3. Press

Operator

to add parentheses [( )] to your equation or to enter a Power exponent (^), such as, 3^2, which is the equivalent of 32.

EST/EDT: New York EST/EDT: Montreal EST/EDT: Boston

Caracas Brasilia Mid Atlantic

Cape Verde London Paris

Rome Berlin Athens

Helsinki Jerusalem Moscow

Baku Abu Dhabi Tashkent

New Delhi Alma-ata Bangkok

Jakarta Hong Kong Beijing

Seoul Tokyo Guam

Sydney Okhotsk Wellington

Samoa Midway HAST/HADT: Honolulu

AKST/AKDT: Alaska PST/PDT: Seattle PST/PDT:

San Francisco

PST/PDT: Los Angeles MST/MDT: Denver MST/MDT: Arizona

CST/CDT: Dallas CST/CDT: Chicago CST/CDT: Houston

CST/CDT: Mexico City EST/EDT: Detroit EST/EDT:

Washington D.C

Page 76

Press the

Clear

soft key to clear current entries.

5. Use the Navigation keys (as shown in the

Calculator

screen) to set the type of calculation that you wish to perform. Your choices are as follows.

•[ +

] Addition

•[ x

] Multiplication

•[ -

] Subtraction

•[ ÷

] Division

6. Use the keypad to enter the second number into your

equation.

7. Press to perform the calculation and view the result.

Stop Watch

You can use this function to set a stop watch.

1. From the

Tools

menu, select

Stop Watch

. The

Stop Watch

screen appears in the display.

2. Press to start, stop, and resume the Stop Watch

count.

3. Press

Record

at the start of each succeeding event/lap to record the completion time for the previous event/lap. You can record up to eight event/lap times.

4. Press

Reset

to reset the Stop Watch and to erase all Stop

Watch (lap) times recorded.

Converter

The conversion menu provides the following conversion categories:

•

Currency

•

Length

•

Weight

•

Volume

•

Area

•

Temperature

Using Converters

To convert a currency, length, weight, volume, area, or temperature, do the following:

1. From the

Tool s

menu, select

Converter

. The following list

of converters appears in the display:

• Currency

• Length

• Weight

•Volume

•Area

• Temperature

2. Highlight the conversion feature you wish to use, then

press .

Page 77

Tools 74

Highlight and select the units to be converted

From

and

4. Enter the quantity you want converted in the

From

field.

The converted quantity appears in the To field.

Note:

To include a decimal point, press the key.

Currency — Reviewing/Editing Exchange Rates

The Currency Converter includes long-term average exchange rates as default values. To review and/or change a default exchange rate to the current exchange rate, do the following:

1. From the

Tool s

menu, select

Converter

➔

Currency

2. Press

Rate

. The

EXCHANGE RATE

list appears in the

display.

3. Press

EDIT

. The

EDIT EXCHANGE RATE

list appears in the

display.

4. Highlight a currency whose exchange rate you wish to

change.

5. Use the keypad keys to change the selected exchange

rate value.

6. Press to save the changed exchange rate. The

EXCHANGE RATE

list appears in the display.

7. To change any other exchange rates, repeat Steps 3 – 6.

8. Press to return to the

Converter

screen.

Currency — Adding Exchange Rates

You can use the Currency Converter to convert from and to obscure currencies by adding exchange rates for these currencies. To add a currency and its exchange rate to the Currency Converter, do the following:

1. From the

Tools

menu, select

Converter

➔

Currency

2. Press the

Rate

soft key. The

Exchange Rate

list for the

From

currency appears in the display.

3. Press the

Add

soft key. The

Add Exchange Rate

screen

appears in the display with the

Base

field highlighted.

4. Use the Left/Right navigation key to select the

Base

currency to be converted from.

5. Press the Down navigation key to highlight the

Currency

field.

6. Enter an identifier of up to 5 characters for the new

currency using the keypad. (For more information, refer to “Entering Text” on page 27.)

7. Highlight the

Exchange Rate

field.

8. Enter a decimal exchange rate for the new currency

using the keypad.

Note:

Press the key to enter the decimal point.

The

Exchange Rate

field only accepts up to five digits after the decimal point.

Page 78

To add the new exchange rate to the list, press

SAVE

Currency — Erasing Exchange Rates

You cannot erase the preloaded currencies from the Exchange Rate list. You can erase a currency that you have added to the list by doing the following:

1. From the

Tools

menu, select

Converter

➔

Currency

2. Press

Rate

. The

EXCHANGE RATE

list for the

From

currency appears in the display.

3. Highlight the user-added currency exchange rate to be

erased.

4. Press

Erase

. You are prompted to confirm the erasure.

Note:

The

Erase

soft key is undefined for preloaded Exchange Rates. This prevents

you from erasing them.

5. To erase the selected exchange rate, press

Yes

. To keep

the selected exchange rate, press No.

Tip Calculator

Tip Calculator automatically calculates the following amounts:

•

Gratuity (tip)

•

Individual payment (for groups)

Calculations are based on the total amount of the check, a selected gratuity percentage, and the number of people paying.

1. From the

Tools

menu, select

Tip Calculator

. The

Tip

Calculator

screen appears in the display with the

Bill

field highlighted.

2. Enter the total amount of the bill using the keypad.

Note:

To include a decimal point, press the key.

3. If needed, press the Down navigation key to highlight

the

Tip

field.

4. Enter a tip percentage using the keypad.

5. If needed, press the Down navigation key to highlight

the

# Paying

field.

6. Enter the number of persons paying using the keypad.

7. The amount of the

Tip

, the bill

Total

, and the amount

Each

person should pay appear in the lower half of the

screen.

Page 79

Settings 76

Section 13: Settings

This section explains how to configure your phone’s language, network preferences, security options, and other settings.

Accessing Your Phone’s Settings

To launch the Settings menu:

1. In standby mode, press

➔

Settings

The

Settings

menu appears in the display.

Location Setting

You can set your phone to pass Global Positioning System (GPS) data to identify your location to the network continually or only when you make an emergency (911) call.

Note:

Check with your Wireless Carrier to determine if/when/where location-based services are available.

1. From the

Settings

menu, select

Location

. The following

Location options appear in the display:

•Location On

— Your location data is continually sent wherever the feature is available. (Default value — supports some downloaded apps.)

• 911 Only

— Your location data is sent only when you dial 911.

2. Highlight the desired option and press to select the

function. The

Settings

menu appears in your display.

3. Press to return to standby mode.

Display Settings

Display settings let you change your phone’s menu appearance, display brightness and contrast, and display content to better meet your needs.

1. From the

Settings

menu, select

Display Settings

. The

following menus appear in the display:

• Menu Style

— Lets you select whether the Main Menu appears

as an array of Icons or as a List of menu labels.

• Wallpaper

— Choose the images that appear as background in

the Main and Front displays on your phone while in standby mode.

• Clock Format

— Choose whether the time and date appear in the Main and Front displays on your phone in optional digital or analog (clock face) style or in the default digital style.

•Theme

— Choose the color set used to show menus and screens

on your phone’s display.

• Dialing Font Size

— Lets you select the size of the font used to

display digits you dial.

• Banner

— Lets you change or replace the text greeting that appears in the display when your phone is in standby mode. Also lets you enable/disable an ERI (Extended Roaming Indicator) banner.

• Backlight

— Set backlight options for the Main Display, Keypad,

and Brightness.

Page 80

•Contrast

— Adjust Main display or Front display contrast between

-50 and 50.

2. Use the Up/Down navigation keys to highlight a sub-

menu.

3. Press to enter the highlighted sub-menu. The

following sections describe the Display sub-menus in greater detail.

Menu Style

1. From the

Settings

menu, select

Display Settings

➔

Style

. The following options appear:

•Icon

— Shows all main menus as an array of icons.

•List

— Shows main menus in scrollable list (text) format.

2. Use the navigation keys to highlight the desired Menu

Style, then press .

Wallpaper

Wallpaper lets you choose images that appear in the background on your phone’s Main and Front displays while in standby mode.

1. From the

Settings

menu, select

Display Settings

➔

Wallpaper

➔

Main Display

Front Display

. The following

options appear:

•My Images

— Lets you select an image that you’ve downloaded.

•Preset Images

— Lets you select an image that came preloaded

with your phone.

2. Highlight the image type that you wish to use and press

. A list of images appears in the display.

3. Highlight the image that you wish to use and press

to save your selection.

Clock Format

Lets you choose whether the time and date appear in the Main and Front displays on your phone in optional digital or analog (clock face) style or in the default digital style.

1. From the

Settings

menu, select

Display Settings

➔

Clock

Format

. The following clock options appear in the

display:

•Main Clock

•Front Clock

2. Use the navigation keys to highlight the desired clock,

then press . The following clock format options appear in the display:

•Digital

— Time, date, and day of the week are shown using an

alternate, large digital format.

•Analog

— Time is shown using an analog clock face image.

•Off

— Time, date, and day of the week are shown using the

default, small digital format.

3. Highlight the image that you wish to use and press

to save your selection.

Page 81

Settings 78

Theme

Lets you select the colors used to show menus and screens in the Main display.

1. From the

Settings

menu, select

Display Settings

➔

Theme

. The following options appear in the display:

2. Use the Left and Right navigation keys to show the

desired color theme (which appears in the preview screen), then press to save the selected theme setting.

Dialing Font Size

Lets you select the size your dialing font.

1. From the

Settings

menu, select

Display Settings

➔

Dialing Font Size

. The following options appear in the

display:

•Normal

•Large

2. Use the Up and Down navigation keys to highlight the

desired setting and press to save the selected setting.

Banner

Create your own personalized greeting that appears in the display while your phone is in standby mode.

1. From the

Settings

menu, select

Display Settings

➔

Banner

. The following sub-menus appear in the display:

•Personal

• ERI Banner

2. Highlight the desired banner, then press the key.

If you select

Personal

, the

Banner

screen appears in the

display with the

Enter Text

field highlighted.

3. Enter a word or short phrase to appear in your phone’s

display while in standby mode (Up to 12 characters). (For more information, refer to “Entering Text” on page

27.)

4. Press and hold to erase an existing banner, if

necessary.

5. Press to save your changes.

If you select

ERI Banner

, the following options appear in

the display:

•On

Page 82

•Off

6. Highlight the desired option, then press .

Backlight

You can set the backlight for your display or keypad to remain on for a specified period of time or remain on as long as the folder is open.

Prolonged backlight use drains your battery faster.

1. From the

Settings

menu, select

Display Settings

➔

Backlight

. The following sub-menus appear in the

display:

•Main Display

— Sets the time the internal display backlight

remains on after a period of inactivity. Optional settings are:

seconds, 15 seconds, 30 seconds, Always On

, and

Always

Off

•Keypad

— Sets the amount of time the keypad backlight remains

on after a period of inactivity. Optional settings are:

10 seconds, 15

seconds, 30 seconds, Always On

, and

Always Off

•Brightness

— Use the Left and Right navigation keys to select

between any of 5 optional settings.

2. Highlight the desired sub-menu and press .

3. Use the Navigation keys to change settings as desired in

the selected sub-menu, and press to save your selection.

Contrast

Set the front display contrast to your preference.

1. From the

Settings

menu, select

Display Settings

➔

Contrast

. The following options are available:

• Main Contrast

— Sets contrast for main display.

• Front Contrast

— Sets contrast for front display.

2. Use the Up/Down navigation keys to highlight the

display contrast you want to adjust, then press . The selected Contrast screen appears in the display showing the current contrast setting.

3. Use the Left/Right navigation keys to adjust the contrast

for the selected display. The results of your adjustments appear in the Contrast screen.

4. Press to save your new contrast setting.

Sound Settings

Sound Settings let you customize your phone’s audio properties, such as ringers, keypad tones, alerts, start up melody, and more.

Volume

Use the Volume sub-menu to set the default volume for call ringers, message alerts, and alarms.

1. From the

Settings

menu, select

Sound Settings

➔

Volume

Page 83

Settings 80

The following options appear in the display:

• Voice Calls

— Lets you set your phone to be silent, play a sound,

and/or vibrate in response to incoming calls.

•Messages

— Lets you set your phone to be silent, play a sound,

and/or vibrate in response to incoming messages.

•Alarms

— Lets you set your phone to be silent, play a sound, and/

or vibrate in response to a preset alarm time being reached.

2. Highlight the desired option, then press .

3. Use the Navigation key or the Volume key (on the left

side of your phone) to select the volume level (

Ringer

Off, Low, Low/Medium, Medium, Medium/High

, or

High

)

or vibrate mode (

Vibrate, Vibrate/High

) for the selected

option.

Tip:

In Standby mode, when you use the Volume key to select a volume level, the level you select is for the Voice Calls ringer only.

4. Press

SET

to save the option setting.

Ringer Type

You can assign ring tones and melodies for calls, alarms, and other alerts in the Ringer Type sub-menu.

1. From the

Settings

menu, select

Sound Settings

➔

Ringer

Type

. The following ringer types appear in the display:

• Voice Calls

•Messages

–

Text Message

–

Picture Message

–

Voicemail

• Roam Ringer

2. Highlight a ringer type, then press . The following

ringtone options appears in the display:

• My Ringtones

• My Sounds

3. Highlight the desired ringtone gallery, then press .

4. Scroll through the list of ringtones and melodies.

•

To play a ringtone or melody, press

Play

5. When the desired ringetone or melody plays, press

to save your selection.

Alerts

You can set your phone to sound an alert whenever you enter or leave your service area, connect or disconnect a call, and other options.

1. From the

Settings

menu, select

Sound Settings

➔

Alerts

The following options appear in the display:

• Minute Beep

— Sound an alert ten seconds before each elapsed

minute of a call.

•Roaming

— Sound an alert when you leave your home service

area.

• Call Connect

— Sound an alert when you connect/disconnect a

call.

Page 84

•Power On/Off

— Play power on and power off melodies.

2. Highlight a sub-menu, then press . The following

options appear in the display:

•On

•Off

3. Highlight active (

) or inactive (

Off

) for the selected

alert, then press to confirm your selection.

Key Tone

You can set the Tone Level (volume) for tones that play when you press keys on your phone and the Tone Length for DTMF tones generated when you press keypad keys.

1. From the

Settings

menu, select

Sound Settings

➔

Key

Tone

. The following options appear in the display:

• Tone Level

— Lets you set the volume at which tones play when

you press a key on your phone (

Off, Low, Low/Medium

Medium, Medium/High

, or

High

• Tone Length

— Lets you select time length (

Short

Long

) for the DTMF pulses your phone generates when you press keypad keys.

2. Highlight the desired sub-menu, then press .

3. Show or highlight the desired setting, then press to

save your setting.

Call Settings

The Call Settings sub-menu lets you set call options such as Auto Retry, Data rates for data calls, and more.

Call Answer

You can select a specific answer mode when you receive an incoming call. Your phone can be preset to answer when you do any of the following:

1. From the

Settings

menu, select

Call Settings

➔

Call

Answer

. The following call answer options appear in the

display:

•Any Key

— Pressing any key except the Volume key or key

answers a call.

• Send Only

— Only pressing answers a call.

• Flip Open

— Opening the flip or pressing answers a call.

2. Highlight the preferred option, then press .

Auto Answer

Auto Answer enables your phone to automatically answer calls after a period of time that you specify.

1. From the

Settings

menu, select

Call Settings

➔

Auto

Answer

. The following options appear in the display:

•Off

• After 1 Second

• After 3 Seconds

Page 85

Settings 82

• After 5 Seconds

2. Highlight the desired setting, then press .

Auto Retry

Auto Retry automatically re-dials a number if there is no answer or the dialed party is busy. Depending upon your location, the number of times your phone redials a number may vary.

1. From the

Settings

menu, select

Call Settings

➔

Auto

Retry

. The following options appear in the display:

•Off

• Every 10 Seconds

• Every 30 Seconds

• Every 60 Seconds

2. Highlight the desired setting, then press .

TTY Mode

Your phone is fully Teletypewriter (TTY)/Telecommunication Device for the Deaf (TDD) compatible. You connect TTY/TDD equipment to the headset connector on the right side your phone.

TTY Mode must be enabled (TTY Full selected) before you can use your phone with TTY/TDD equipment.

1. From the

Settings

menu, select

Call Settings

➔

TTY

Mode

A message pops-up warning of possible headset and non-TTY accessory performance impairment when in TTY mode and prompting you to confirm that you want to enable/disable TTY Mode.

•

Press

Ye s

to change the TTY Mode setting.

•

Press No to keep the current TTY Mode setting.

If you press

Yes

, the following options appear in the

display:

• TTY Full

— Enables TTY mode while letting you hear and speak

with the other party.

• TTY + Talk

— Enables TTY mode while letting you speak with the

other party.

• TTY + Hear

— Enables TTY mode while letting you hear the other

party.

• TTY Off

— Disables TTY mode.

Note:

The

TTY Mode

option has no effect on the phone’s earpiece, microphone, or

speaker. When you select

TTY Full

, all currently enabled sound functions

remain enabled.

2. Highlight your selection and press . You’re returned

to the previous menu and the TTY icon ( ) appears in the top of the display.

Voice Privacy

Voice Privacy lets you choose what level of voice security (Standard or Enhanced) your phone will use.

Page 86

Tip:

You can change your Voice Privacy setting during a call by using the

In-Use

options. (For more information, refer to “In-Use Menu” on page 21.)

1. From the

Settings

menu, select

Call Settings

➔

Voice

Privacy

. The following options appear in the display:

• Standard

• Enhanced

2. Highlight the Voice Privacy option of your choice, then

press .

3. the top of the display.

Data Settings

Voice Privacy lets you choose what level of voice security (Standard or Enhanced) your phone will use.

1. From the

Settings

menu, select

Call Settings

➔

Data

Settings

. The following options appear in the display:

•Data Off

— No incoming data calls can be received.

•Data for Next Call

— Waits for data call (not voice) for 10 minutes.

• Data Until Powered Off

— No incoming voice calls can be

received.

2. Highlight the Data Setting option of your choice, then

press .

Phone Settings

Airplane Mode

When set to On, Airplane Mode disables all radio functions of your phone. This prevents you from making or receiving calls, but allows you to use other features (such as the camera and the Tools) safely in sensitive environments, such as on board an aircraft.

1. From the

Settings

menu, select

Phone Settings

➔

Airplane Mode

. The following options appear in the

display:

•On

— Disables the radio transmitter and receiver and the Bluetooth

interface in your phone.

Tip:

If you need to make an emergency call with Airplane mode enabled, just dial the emergency number and press .

•Off

— Enables the radio transmitter and receiver in your phone.

2. To return to the Phone Settings menu, press .

3. Highlight the desired option, then press . You are

prompted to confirm your setting change.

•

Press

Ye s

to change to the new setting.

•

Press No to discard the change and keep the original setting.

Page 87

Settings 84

Note:

If you press

Yes

, you are returned to standby mode, and the Airplain Mode

icon ( ) appears in the display. If you press No, the

Airplane Mode

screen

remains in the display.

Language

The Language option changes the language of menus, submenus, and other user-interface features.

1. From the

Settings

menu, select

Phone Settings

➔

Language

The following options appear in the display:

• English

•Español

2. Highlight your language preference, then press .

Security

Use the Security sub-menu to lock your phone, set up emergency numbers, enable or disable voice privacy, set restrictions, and other security options.

To access the

Security

menu, do the following:

1. From the

Settings

menu, select

Phone Settings

➔

Security

The “

Enter Code

” prompt appears in the display.

2. Enter the four-digit lock code using the keypad.

Note:

The default lock code is the last four digits of your mobile phone number.

The “

Enter Code

” prompt disappears and the

Security

menu appears in the display.

Lock Phone

Locking the phone blocks all outgoing calls except those to 911 and to the three user-programmed emergency numbers. You can lock the phone manually, or set the phone to lock automatically when turned on. In Lock mode, you can answer calls, but you must unlock the phone to place calls (except to emergency and secret numbers).

Important!:

If you do the following, you won’t be able to access your phone and you will be required to call the Service Center to unlock your phone.

– Set

Lock Phone

On Power Up

– Change the

NAM Selection

setting without a number programed into

NAM2

1. From the

Security

menu, select

Lock Phone

. The

following options appear in the display:

•Lock

— The phone locks immediately and stays locked until you

enter the lock code.

•Unlock

— The phone remains unlocked.

•On Power Up

— The phone locks automatically the next time your

phone is powered on and stays locked until you enter the lock code.

Page 88

Highlight the Lock Phone option of your choice, then press to perform the function for the highlighted option.

Change Lock

The default lock code is generally the last four digits of your phone number. It is advisable to change the default lock code to a secret code for security purposes.

1. From the

Security

menu, select

Change Lock

The “

New Lock Code

” prompt appears in the display.

2. Enter the New Lock Code. You’re prompted to re-enter

the New Lock Code for verification.

3. Enter the New Lock Code again. Your changes are

stored.

Tip:

Your phone does not allow you to view the lock code for obvious security reasons. If you change the lock code, be sure to write down or memorize the new code.

Emergency #

You have the option of storing up to three emergency numbers to your phone. Each number can be up to 32 digits in length. All emergency numbers can be dialed any time, even when your phone is locked or restricted.

Note:

Emergency number 911 is hard-coded into your phone. You can dial this number any time, even when the phone is locked, restricted, or in Airplane Mode. If you call 911, an audible tone plays and an Emergency prompt appears in the display for the duration of the call.

Important!:

Because of various transmission methods, network parameters, and user settings used to complete a call from your wireless phone, a connection cannot always be guaranteed. Therefore, emergency calling may not be available on all wireless networks at all times.

Important!:

DO NOT depend on this phone as a primary method of calling 911 or for essential or emergency calls.

Remember to always turn your phone on and check for adequate signal strength before placing a call.

Note:

When you dial an emergency number, you phone locks itself to the emergency location that answered the call and locks itself in 911-Only mode, blocking from dialing any number but an emergency number.

Store Emergency Numbers

1. From the

Security

menu, select

Emergency #

2. Press , , or to select one of the three

emergency numbers.

3. Enter the emergency number (up to 32 digits in length).

4. Press to save the number that you entered.

Page 89

Settings 86

Press

Cancel

to discard your entry and return to the

Emergency #

menu.

Call Emergency Numbers in Lock Mode

1. In standby mode, enter the emergency number using

the keypad.

2. Press to place the call.

Reset Phone

Reset Phone returns all setup parameters (except for the Contacts entries) to their factory default values.

Caution!:

Before selecting

Reset Phone

, contact your Wireless Carrier. Invoking

Reset Phone

may erase settings made by your Wireless Carrier from your

phone, resulting in loss of service.

䊳

From the

Security

menu, select

Reset Phone

A prompt appears in the display to restore default settings (except for Contacts).

•

Press

Yes

to reset your phone to factory default settings.

•

Press No to keep the current settings.

Erase All Entry

Erase All Entry deletes all entries from the Contacts list.

䊳

From the

Security

menu, select

Erase All Entry

A prompt appears in the display to restore default Contacts entries and erase all others.

•

Press

Ye s

to reset (delete) your Contacts list.

•

Press No to keep the current Contacts entries.

Restriction

Restriction lets you restrict the use of your phone for outgoing calls, incoming calls, and calls placed by/to your Contacts.

1. From the

Security

menu, select

Restriction

. The

following options appear in the display:

• Outgoing

— Restrict/allow outgoing calls.

•Incoming

— Restrict/allow incoming calls.

•Contacts

— Restrict/allow calls not to or from Contacts.

2. Highlight the desired Restriction and press . The

following options appear in the display:

•On

— Restrict (block) selected calls.

•Off

— No restriction on selected calls.

Note:

Default setting for all Restrictions is

Off

3. Highlight the desired setting, then press .

NAM Selection

NAM Selection allows you to set your preferred system. Contact your Wireless Carrier for more information.

Page 90

Important!:

If you do the following, you won’t be able to access your phone and you will be required to call the Service Center to unlock your phone.

– Set

Lock Phone

On Power Up

– Change the

NAM Selection

setting without a number programed into

NAM2

1. From the

Settings

menu, select

Phone Settings

➔

NAM

Selection

The following NAM options appear in the display:

•NAM 1

— Your service contract has one phone line.

•NAM 2

— Your service contract has two phone lines.

2. Highlight the desired NAM setting, then press .

Note:

The phone automatically restarts.

System Select

The System Select feature enables you to automatically or manually select the network used when roaming outside of your home area.

1. From the

Settings

menu, select

Phone Settings

➔

System Select

. The following roaming options appear in

the display:

• MetroPCS only

— Roaming is off. If your home system is not available then your calls will not be connected, and the No Service icon ( ) appears in the display. In some service areas, an

operator may come on-line and ask you how you would prefer to pay for a call.

•Automatic

— Roaming is on. This option will always try to connect your calls using a digital service in the Preferred Roaming List (PRL) loaded into your phone. If a preferred service is not found, then this option will attempt to acquire any digital service.

2. Highlight the desired roaming option, then press .

The

Phone Settings

menu appears in the display.

Set Time

Use Set Time to set the current time and date.

Note:

In digital service mode, the

Set Time

feature is disabled. The network adjusts

time and date on your phone automatically.

1. From the

Settings

menu, select

Phone Settings

➔

Set

Time

. The following options appear in the display:

•Set Date

•Set Time

2. Highlight the desired Set Time option, then press .

The associated screen (

Set Time

Set Date

) appears in

the display.

Set Time

1. In the

Set Time

screen, enter the current time using your

keypad.

Page 91

Settings 88

Note:

The hour and minute values must be entered using two digits each (such as, 05 or 11). You must enter the hour value in 12-hour format (that is, values 01 – 12).

2. To select am or pm, use the Left and Right navigation

keys.

3. Press to save the new time.

Set Date

1. In the

Set Date

screen, enter the current date using your

keypad.

Note:

The month and day values must be entered using two digits each (such as, 10 or 30). The year value must be entered using all four digits (such as,

2007).

2. Press to save the new date.

Quick Search

Quick Search is an easy way to locate contacts in your Contacts list and individual Menu options.

1. From the

Settings

menu, select

Phone Settings

➔

Quick

. The following options appear in the display:

•On

•Off

2. Highlight the desired option, then press .

Searching for a Contact

1. In standby mode, press the first few numeric keys that

correspond to the letters of the Contact’s name.

Example:

To search for “Sally” you would enter

725

2. Press the Up navigation key. A list of Contact names

appears in the display.

3. Highlight the searched for Contact.

•

To call the Contact, press .

•

To view the Contact, press .

Searching for a Menu Item

1. In standby mode, press the first few numeric keys that

correspond to the letters of the Menu option label.

Example:

To search for “Inbox” you would enter

462

2. Press the Down navigation key. A list of matching menu

options appears in the display.

3. Highlight the desired menu option, then press to

access the content for the searched for menu option.

Page 92

Memory Info

Memory Info shows the amount of phone memory that is available and used, and details the distribution of the used memory.

1. From the

Settings

menu, select

Memory Info

. The

following memory usage items appear in the display:

•Total Used

— Shows Total phone memory Used to store Images,

Ringtones, Sounds, and Applications.

• Available

— Shows total phone memory Available to store

Images, Ringtones, Sounds, and Applications.

•My Images

— Shows total phone memory used to store Images

in the My Images folder.

• My Ringtones

— Shows total phone memory used to store

ringtones in the My Ringtonoes folder.

• My Sounds

— Shows total phone memory used to store recorded

sounds in the My Sounds folder.

• Applications

— Shows total phone memory used to store

downloaded Applications.

2. Press to return to the

Settings

menu.

Phone Info

Phone Info lets you identify the hardware and software versions of your phone and to identify the phone number assigned to your phone.

Phone Number

The Phone Number option lets you review the ten-digit number assigned to your phone by your Wireless Carrier and other information useful when contacting Customer Service.

1. From the

Settings

menu, select

Phone Info

➔

Phone

Number

. The Phone number screen appears in the

display listing the following information:

•

Phone Number assigned by your Wireless Carrier.

•

Support System information.

2. Press to return to the

Phone Info

menu.

Icon Glossar y

This option causes the

Icon Glossary

list to appear showing the

icons that can appear in the display and the names of the icons.

1. From the

Settings

menu, select

Phone Info

➔

Icon

Glossary

. A list of the icons that can appear on the top

line of the display appears in the display.

2. Press to return to the

Phone Info

menu.

Page 93

Settings 90

Version

You can view the S/W (Software) version, PRL (Preferred Roaming List) identifier, ERI (Extended Roaming Indicator), Browser version, and H/W (Hardware) version on your phone. This feature is helpful if you need to contact Customer Service.

1. From the

Settings

menu, select

Phone Info

➔

Version

. Hardware and software information for your phone appears in the display.

2. Press to return to the

Phone Info

menu.

MEID

You can view both the Mobile Equipment Identifier (MEID) of your phone using this feature. This feature is helpful if you need to contact Customer Service.

1. From the

Settings

menu, select

Phone Info

➔

MEID

. Hardware and software information for your phone appears in the display.

2. Press to return to the

Phone Info

menu.

Page 94

Section 14: Health and Safety Information

This section outlines the safety precautions associated with using

your phone. These safety precautions should be followed to safely use your phone.

Health and Safety Information

Exposure to Radio Frequency (RF) Signals

Certification Information (SAR)

Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the exposure limits for radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. government.

These FCC exposure limits are derived from the recommendations of two expert organizations, the National Counsel on Radiation Protection and Measurement (NCRP) and the Institute of Electrical and Electronics Engineers (IEEE).

In both cases, the recommendations were developed by scientific and engineering experts drawn from industry, government, and academia after extensive reviews of the scientific literature related to the biological effects of RF energy.

The exposure limit set by the FCC for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate (SAR). The SAR is a measure of the rate of

absorption of RF energy by the human body expressed in units of watts per kilogram (W/kg). The FCC requires wireless phones to comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg). The FCC exposure limit incorporates a substantial margin of safety to give additional protection to the public and to account for any variations in measurements.

SAR tests are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.

Before a new model phone is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC. Tests for each model phone are performed in positions and locations (e.g. at the ear and worn on the body) as required by the FCC. For body worn operation, this phone has been tested and meets FCC RF exposure guidelines when used with an accessory that contains

Page 95

Health and Safety Information 92

no metal and that positions the handset a minimum of 1.5 cm from the body.

Use of other accessories may not ensure compliance with FCC RF exposure guidelines.

The FCC has granted an Equipment Authorization for this mobile phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. The maximum SAR values for this model phone as reported to the FCC are:

Cellular CDMA

•

Head: 0.958 W/Kg.

•

Body-worn: 0.871 W/Kg.

PCS CDMA

•

Head: 1.05 W/Kg.

•

Body-worn: 0.472 W/Kg.

AWS CDMA

•

Head: 0.634 W/Kg.

•

Body-worn: 0.448 W/Kg.

SAR information on this and other model phones can be viewed on-line at

http://www.fcc.gov/oet/ea

. To find information that pertains to a particular model phone, this site uses the phone FCC ID number which is usually printed somewhere on the case of the phone.

Sometimes it may be necessary to remove the battery pack to find the number. Once you have the FCC ID number for a particular phone, follow the instructions on the website and it should provide values for typical or maximum SAR for a particular phone. Additional product specific SAR information can also be obtained at

www.fcc.gov/cgb/sar.

Samsung Mobile Products and Recycling

Samsung cares for the environment and encourages its customers to recycle Samsung mobile phones and genuine Samsung accessories.

Go to:

https://fun.samsungmobileusa.com/recycling/index.jsp

for more

information.

UL Certified Travel Adapter

The Travel Adapter for this phone has met applicable UL safety requirements. Please adhere to the following safety instructions per UL guidelines.

FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE.

IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS.

DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS.

Page 96

FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE AN ATTACHMENT PLUG ADAPTOR OF THE PROPER CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT IS INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR HORIZONTAL OR FLOOR MOUNT POSITION.

Consumer Information on Wireless Phones

The U.S. Food and Drug Administration (FDA) has published a series of Questions and Answers for consumers relating to radio frequency (RF) exposure from wireless phones. The FDA publication includes the following information:

What kinds of phones are the subject of this update?

The term wireless phone refers here to hand-held wireless phones with built-in antennas, often called "cell," "mobile," or "PCS" phones. These types of wireless phones can expose the user to measurable radio frequency energy (RF) because of the short distance between the phone and the user's head. These RF exposures are limited by Federal Communications Commission safety guidelines that were developed with the advice of FDA and other federal health and safety agencies.

When the phone is located at greater distances from the user, the exposure to RF is drastically lower because a person's RF exposure decreases rapidly with increasing distance from the source. The so-called "cordless phones," which have a base unit connected to the telephone wiring in a house, typically operate at

far lower power levels, and thus produce RF exposures well within the FCC's compliance limits.

Do wireless phones pose a health hazard?

The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of radio frequency energy (RF) in the microwave range while being used. They also emit very low levels of RF when in the stand-by mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed by additional research.

In some cases, other researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent results.

What is FDA's role concerning the safety of wireless phones?

Under the law, FDA does not review the safety of radiationemitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless

Page 97

Health and Safety Information 94

phones are shown to emit radio frequency energy (RF) at a level that is hazardous to the user. In such a case, FDA could require the manufacturers of wireless phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazard no longer exists.

Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone industry to take a number of steps, including the following:

•

Support needed research into possible biological effects of RF of the

type emitted by wireless phones;

•

Design wireless phones in a way that minimizes any RF exposure to

the user that is not necessary for device function; and

•

Cooperate in providing users of wireless phones with the best possible

information on possible effects of wireless phone use on human health.

FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of RF safety to ensure coordinated efforts at the federal level. The following agencies belong to this working group:

•

National Institute for Occupational Safety and Health

•

Environmental Protection Agency

•

Federal Communications Commission

•

Occupational Safety and Health Administration

•

National Telecommunications and Information Administration

The National Institutes of Health participates in some interagency working group activities, as well.

FDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission (FCC). All phones that are sold in the United States must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA and other health agencies for safety questions about wireless phones.

FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher power than do the wireless phones themselves, the RF exposures that people get from these base stations are typically thousands of times lower than those they can get from wireless phones.

Base stations are thus not the primary subject of the safety questions discussed in this document.

What are the results of the research done already?

The research done thus far has produced conflicting results, and many studies have suffered from flaws in their research methods. Animal experiments investigating the effects of radio frequency energy (RF) exposures characteristic of wireless phones have yielded conflicting results that often cannot be repeated in other laboratories. A few animal studies, however, have suggested that low levels of RF could accelerate the development of cancer in laboratory animals.

Page 98

However, many of the studies that showed increased tumor development used animals that had been genetically engineered or treated with cancer-causing chemicals so as to be predisposed to develop cancer in absence of RF exposure. Other studies exposed the animals to RF for up to 22 hours per day. These conditions are not similar to the conditions under which people use wireless phones, so we don't know with certainty what the results of such studies mean for human health.

Three large epidemiology studies have been published since December 2000. Between them, the studies investigated any possible association between the use of wireless phones and primary brain cancer, glioma, meningioma, or acoustic neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of the studies demonstrated the existence of any harmful health effects from wireless phones RF exposures. However, none of the studies can answer questions about long-term exposures, since the average period of phone use in these studies was around three years.

What research is needed to decide whether RF exposure from wireless phones poses a health risk?

A combination of laboratory studies and epidemiological studies of people actually using wireless phones would provide some of the data that are needed. Lifetime animal exposure studies could be completed in a few years. However, very large numbers of

animals would be needed to provide reliable proof of a cancer promoting effect if one exists. Epidemiological studies can provide data that is directly applicable to human populations, but ten or more years' follow-up may be needed to provide answers about some health effects, such as cancer. This is because the interval between the time of exposure to a cancer-causing agent and the time tumors develop - if they do - may be many, many years. The interpretation of epidemiological studies is hampered by difficulties in measuring actual RF exposure during day-to-day use of wireless phones.

Many factors affect this measurement, such as the angle at which the phone is held, or which model of phone is used.

What is FDA doing to find out more about the possible health effects of wireless phone RF?

FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure that high priority animal studies are conducted to address important questions about the effects of exposure to radio frequency energy (RF). FDA has been a leading participant in the World Health Organization international Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result of this work has been the development of a detailed agenda of research needs that has driven the establishment of new research

Page 99

Health and Safety Information 96

programs around the world. The Project has also helped develop a series of public information documents on EMF issues.

FDA and Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations.

CTIA-funded research is conducted through contracts to independent investigators. The initial research will include both laboratory studies and studies of wireless phone users. The CRADA will also include a broad assessment of additional research needs in the context of the latest research developments around the world.

What steps can I take to reduce my exposure to radio frequency energy from my wireless phone?

If there is a risk from these products - and at this point we do not know that there is - it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radio frequency energy (RF). Since time is a key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure.

•

If you must conduct extended conversations by wireless phone every

day, you could place more distance between your body and the source

of the RF, since the exposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna.

Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the RF exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless phone use.

What about children using wireless phones?

The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to take steps to lower exposure to radio frequency energy (RF), the measures described above would apply to children and teenagers using wireless phones. Reducing the time of wireless phone use and increasing the distance between the user and the RF source will reduce RF exposure.

Some groups sponsored by other national governments have advised that children be discouraged from using wireless phones at all. For example, the government in the United Kingdom distributed leaflets containing such a recommendation in December 2000. They noted that no evidence exists that using a wireless phone causes brain tumors or other ill effects.

Page 100

Their recommendation to limit wireless phone use by children was strictly precautionary; it was not based on scientific evidence that any health hazard exists.

Do hands-free kits for wireless phones reduce risks from exposure to RF emissions?

Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that handsfree kits reduce risks. Hands-free kits can be used with wireless phones for convenience and comfort. These systems reduce the absorption of RF energy in the head because the phone, which is the source of the RF emissions, will not be placed against the head. On the other hand, if the phone is mounted against the waist or other part of the body during use, then that part of the body will absorb more RF energy. Wireless phones marketed in the U.S. are required to meet safety requirements regardless of whether they are used against the head or against the body. Either configuration should result in compliance with the safety limit.

Do wireless phone accessories that claim to shield the head from RF radiation work?

Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that accessories that claim to shield the head from those emissions reduce risks. Some products that claim to shield the user from RF

absorption use special phone cases, while others involve nothing more than a metallic accessory attached to the phone. Studies have shown that these products generally do not work as advertised. Unlike "hand-free" kits, these so-called "shields" may interfere with proper operation of the phone. The phone may be forced to boost its power to compensate, leading to an increase in RF absorption. In February 2002, the Federal trade Commission (FTC) charged two companies that sold devices that claimed to protect wireless phone users from radiation with making false and unsubstantiated claims. According to FTC, these defendants lacked a reasonable basis to substantiate their claim.

What about wireless phone interference with medical equipment?

Radio frequency energy (RF) from wireless phones can interact with some electronic devices. For this reason, FDA helped develop a detailed test method to measure electromagnetic interference (EMI) of implanted cardiac pacemakers and defibrillators from wireless telephones. This test method is now part of a standard sponsored by the Association for the Advancement of Medical instrumentation (AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and many other groups, was completed in late 2000. This standard will allow manufacturers to ensure that cardiac pacemakers and defibrillators are safe from wireless phone EMI. FDA has tested