All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers
relating to the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone
System”), is proprietary to Samsung and protected under federal laws, state laws, and international treaty provisions. Intellectual
Property includes, but is not limited to, inventions (patentable or unpatentable), patents, trade secrets, copyrights, software,
computer programs, and related documentation and other works of authorship. You may not infringe or otherwise violate the
rights secured by the Intellectual Property. Moreover, you agree that you will not (and will not attempt to) modify, prepare
derivative works of, reverse engineer, decompile, disassemble, or otherwise attempt to create source code from the software. No
title to or ownership in the Intellectual Property is transferred to you. All applicable rights of the Intellectual Property shall remain
with SAMSUNG and its suppliers.
Open Source Software
Some software components of this product incorporate source code covered under GNU General Public License (GPL), GNU Lesser
General Public License (LGPL), OpenSSL License, BSD License and other open source licenses. To obtain the source code covered
under the open source licenses, please visit:
http://opensource.samsung.com
.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE
PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR
ITS FITNESS FOR ANY PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE
PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING
SCH-R270_UM_English_FE01_CH_051512_F2
THERETO. NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR
ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, OR LOSS OF ANTICIPATED PROFITS
OR BENEFITS.
SAMSUNG IS NOT LIABLE FOR PERFORMANCE ISSUES OR INCOMPATIBILITIES CAUSED BY YOUR EDITING OF REGISTRY SETTINGS,
OR YOUR MODIFICATION OF OPERATING SYSTEM SOFTWARE.
USING CUSTOM OPERATING SYSTEM SOFTWARE MAY CAUSE YOUR DEVICE AND APPLICATIONS TO WORK IMPROPERLY.
Samsung Telecommunications America (STA), LLC
Headquarters:
1301 E. Lookout Drive
Richardson, TX 75082
Customer Care Center:
1000 Klein Rd.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
For 24 hour information and assistance, we offer a new FAQ/ARS System (Automated Response System) at:
www.samsung.com/us/support
Nuance®, VSuite™, T9® Text Input, and the Nuance logo are trademarks or registered trademarks of Nuance Communications,
Inc., or its affiliates in the United States and/or other countries.
®
and NetFront™ are trademarks or registered trademarks of ACCESS Co., Ltd. in Japan and other countries.
ACCESS
The Bluetooth® word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are
registered trademarks and are wholly owned by the Bluetooth SIG.
microSD™, microSD™HC, and the microSD logo are Trademarks of the SD Card Association.
easy
edgeSM is a service mark of United States Cellular Corporation.
®
Openwave
is a registered Trademark of Openwave, Inc.
Google, the Google logo, Android, the Android logo, Gmail, Google Mail, Google Maps, Google Music, Google Play, Google Talk,
Google Play, Picasa, YouTube and other marks are trademarks of Google Inc.
Wi-Fi is a registered trademark of the Wireless Fidelity Alliance, Inc.
Swype™ and the Swype logos are trademarks of Swype, Inc.
Table of Contents
Section 1: Getting Started .......................... 4
Understanding this User Manual . . . . . . . . . . . . 4
Index .........................................................124
3
Section 1: Getting Started
This section explains how to start using your SCH-R270 by
activating your service, setting up your Voicemail, or getting an
understanding of how this manual is put together.
Understanding this User Manual
The chapters of this guide generally follow the same order as the
menus and sub-menus in your phone. A robust index for quick
reference to most features begins on page 124.
Also included is important safety information that you should
know before using your phone. Most of this information is near
the back of the guide, beginning on page 94.
Notes and Tips
Throughout this guide there is text that is set apart from the rest.
These are intended to point out important information, quick
methods for activating features, to define terms, and more. The
definitions for these methods are as follows:
•
Notes
: Explain alternative options within the current feature, menu, or
sub-menu.
•
Tips
: Provide quick or innovative methods for performing functions
related to the subject at hand.
•
Important
: Points out important information about the current feature
that could affect performance, or even damage your phone.
4
Text Conventions
This manual provides condensed information about how to use
your phone. To make this possible, the following terms and icon
display in place of repeatedly-used procedural steps:
highlight
select
➔ Used in place of “select” in long “drill down”
Use the Navigation key () to move a
highlighting effect onto a menu item or screen
item of interest.
After “highlighting” a menu item or screen item,
press to launch, access, or save a
highlighted menu item or screen field of interest.
procedure steps.
Example:
Select
Settings
➔
Answer
.
Call Settings
➔
Call
Battery
Your phone is powered by a rechargeable, standard Li-Ion
battery. A travel charger is included with the phone, for charging
the battery.
Note:
The battery comes partially charged. You must fully charge
the battery before using your phone for the first time. A fully
discharged battery requires up to 4 hours of charge time.
After the first charge, you can use the phone while charging.
Warning!
Use only Samsung-approved charging devices and
batteries. Samsung accessories are designed to
maximize battery life. Using other accessories may
invalidate your warranty and may cause damage.
Removing the batter y cover
Pull up using the slot provided (1), while lifting the cover
off the phone (2).
Getting Started 5
Installing the battery cover
Align the cover and press it firmly into place, being sure it
snaps into place at the corners.
Installing the Battery
Note:
Your phone comes packaged with a partially charged
rechargeable standard Li-Ion battery and travel adapter.
Important!
You must fully charge the battery the first time you use
your phone, otherwise you could damage the battery.
6
1. Remove the battery cover. For more information, refer to
“Removing the battery cover” on page 5.
2. Insert battery into the phone housing, aligning the gold
contacts on the battery with the gold contacts in the
phone. Push down on the bottom of the battery down.
3. Install the battery cover.
Removing the Battery
Charging Head
1. Press and hold to turn off the phone (if on).
2. Remove the battery cover. For more information, refer to
“Removing the battery cover” on page 5.
3. Lift the bottom of the battery up (1) and away (2) from the
phone.
Charging the Battery
Your phone is powered by a rechargeable standard Li-Ion battery.
Only use Samsung-approved charging devices and batteries.
Samsung accessories are designed to maximize battery life. Use
of other accessories may invalidate your warranty and may cause
damage.
1. Insert the larger end of the USB Data Cable into the
Charging Head.
2. Plug the charging head into a standard AC power outlet.
Incorrect
3. Insert the smaller end of the USB Data Cable into the
charger/accessory connector on the lower right side of
your phone.
Getting Started 7
Correct
Incorrect
4. When charging is complete, unplug the charging head
from the power outlet and remove the USB cable from the
phone.
8
Important!
For connection to an electrical supply not located in
North America, you must use an adaptor of the proper
configuration for the power outlet. Use of the wrong
adapter could damage your phone and void your
warranty.
Low Battery Indicator
The battery indicator () in the upper-right corner of the
display indicates power level. Monitor the battery strength and
ensure your battery is adequately charged.
Five bars () indicate a full charge.
An empty battery icon () indicates a near empty battery.
A blinking empty battery icon () and a tone sounding
indicate you have two to three minutes before the battery is too
low to operate the phone.
If you continue to use your phone without charging the battery,
the phone will shut down.
Activating Your Phone
Contact your Wireless Carrier and follow their instructions for
obtaining service, if necessary. We suggest that you read this
guide to fully understand the services your phone supports.
Turning Your Phone On
1. If closed, open your phone, as shown.
2. Press . The display lights.
Note:
As with any other radio-transmitting device, do not touch the
antenna while using your phone because this may affect call
quality or cause the phone to operate at a higher than
necessary power level.
•
The phone begins searching for a network signal.
•
Once the phone finds a signal, the time, date, and day at the top of
the screen.
•
you are now ready to place and receive calls.
Note:
If you are outside of your carrier’s coverage or roaming area,
the Roaming icon ( )displays at the top of the phone’s
screen. If you cannot place or receive calls, try later when
service is available, or at another location.
Turning Your Phone Off
1. If closed, open your phone.
2. Press and hold for two or more seconds. The
phone powers off.
Note:
If the phone is on and you press for less than one
second, the phone does not power off. This prevents your
phone from accidental shut-down.
Setting Up and Listening to Voicemail
Voicemail allows callers to leave voice messages, which are
retrievable anytime.
Note:
Once your Voicemail account is set up, you can use the
Voicemail folder (under the Message menu) to view details
of voice messages in your Voicemail box.
To dial Voicemail:
1. In standby mode, press and hold or dial your own
mobile number.
2. Follow the prompts in the new user tutorial to setup your
mail box.
Getting Started 9
To listen to Voicemail
In standby mode, press and hold or dial your own
mobile number to dial Voicemail. After connecting, you
hear your voice greeting and are prompted to enter your
password.
10
Section 2: Understanding Your Phone
This section outlines some key features of your phone. It also
describes the screen format and the icons that display when the
phone is in use.
Features of Your Phone
•
Domestic and international voice and text messaging service
(available on participating networks).
•
High speed data (CDMA 2000 1x Technology)
•
Bluetooth® Wireless Technology, v2.1 Enhanced Data Rate (see Note)
•
Global Positioning System (GPS) Technology
•
Personal Information Management Tools
•
Text (SMS) and Picture (MMS) Messaging
•
Music Player (requires an optional Memory Card)
•
Memory Card Slot (MicroSD™ and microSD™HC up to 32 GB)
•
E-mail Messaging
•
Built-in 1.3 Megapixel Digital Camera
•
Voice Dial
Note:
The SCH-R270 supports the wireless Headset, Handsfree,
Object Push, File Transfer, Dial-up Networking, and Phone
Book Access profiles for Bluetooth® wireless technology.
The SCH-R270 does not support Bluetooth OBEX profiles. For
more information, refer to “Bluetooth” on page 70.
Understanding Your Phone 11
Side View
1
2
3
4
5
12
Features
1.
Volume Key
: Allows you adjust the ring volume in standby
mode, adjust the voice volume during a call, or mute the
ringer during an incoming call.
2.
Power/Accessory Connector
headset (for hands free operation), or optional TTY device,
charging accessories, or optional accessory cables to your
: Used to connect an optional
phone.
3.
Camera Key
and takes photos.
4.
3.5 MM Headset Jack
to hear music, calls, and more.
5.
Strap Attachment
: Launches the Camera feature of your phone
: Plug in a 3.5 millimeter headset jack
: Attach an optional strap (not included).
Closed View of Your Phone
1
2
Feature
1.
Camera Lens
2.
Sub LCD screen
without opening the phone.
: The lens of your built-in camera.
: Displays Status icons, time, and date
Understanding Your Phone 13
Open View (Front) of Your Phone
1
3
4
5
7
13
12
11
10
8
2
14
6
9
14
Features
1.
Earpiece
: Allows you to listen to callers.
2.
Main Display
: Indicates the status of your phone, including
status icons, message indicators, signal strength and
more.
3.
Navigation Key
: In Menu mode, lets you scroll through the
phone menu options. In Standby mode, lets you access
preset functions and one user-defined function.
4.
Left Soft Key
: Used to navigate through menus and
applications and to select the choice indicated at the
bottom left corner of the Main LCD.
5.
SEND Key
: Lets you place or receive a call. In standby
mode, press once to access the recent calls log.
6.
Voicemail Key:
Lets you speed dial your Voicemail account
to review your voice messages.
7.
Special Function Key
: When in a text entry field press and
hold to toggle between text entry modes. Also when dialing
an international number, press and hold to add a “+”.
8.
Voice Recognition Key
: Press and hold to launch voice
recognition system. Pressed while entering text in T9
mode, T9 displays an alternative word suggestion. For
details see “Using T9 Word Mode” on page 35.
9.
Microphone
: Lets the other caller hear you when you are
speaking.
10.
Vibrate Mode Key
: Press and hold to activate vibration
mode.
11.
CLR Key
: Deletes characters from the display when you are
in text entry mode. Press this key to return to the previous
menu or screen when navigating features on your phone.
12.
END Key
: Ends a call. If you press and hold the END key, the
power goes On or Off. When you receive an incoming call,
press to send the call to voicemail.
13.
Right Soft Key
: Used to navigate through menus and
applications and to select the choice indicated at the
bottom right corner of the Main Display.
14.
OK Key
: Press when navigating through a menu to accept
the highlighted choice.
Command Keys
KeyTyp e/Mo deFunction
Left soft/Standby mode
Edit mode
Right soft/Contact
Launches the Messages menu.
Edits a contact entry.
Launches the Contacts Find
screen.
Options mode
Back
Displays a pop-up.
Goes back one menu level.
Understanding Your Phone 15
Function Keys
The Function keys launch menus, accept selections, answer
calls, dial calls, and perform other functions from Standby mode,
or in various other modes.
The following table depicts each key and the action it performs:
KeyFromAction
Standby mode
In a menu
Camera mode
Edit mode
Launches the Main Menu.
Accepts the highlighted
selection.
Takes a photo or creates a Picture
message.
Edits a Draft message.
16
KeyFromAction
Standby mode
Dialing mode
During a call
Any mode
During a call
From any menu
Text input mode
Menu mode
Answers calls.
Short press displays a list of
recent calls to and from the
phone.
Press twice to call the most
recent number.
Enter a number that you want and
call.
Dials a call.
Picks up a waiting call. Press
twice to switch back to the other
call.
Turns the phone On or Off.
Press once to disconnect the call.
Returns to Standby mode, or
cancels last input.
Deletes a character.
Press and hold to erase the entire
sentence.
Briefly press to go back one
menu level.
KeyFromAction
Voice Commands
Calls
Calendar
easy
edge
SM
Navigation key
Browse menus, submenus, or
lists.
Each directional key acts as
shortcut to launch applications.
Navigation Key Shortcuts
In standby mode, press a navigation key to launch the key’s
corresponding application.
Tip:
To customize the
then select
Settings
My Images
➔
Phone Settings
shortcut key press
➔
Shortcut Key
Menu
(),
.
Camera Key
Use the
Camera Key
•
In standby mode, press and hold to launch the camera.
•
While in Camera mode, press to take a photo.
Vibration Mode Key
Use the
Vibrate Mode Key to control Vibrate Only mode:
• In standby mode
mode.
• In standby mode
profile.
Voice Commands Key
Use the Voice Commands Key
Commands.
Vol um e Key
Use the
Volume Key
() for Camera functions:
, press and hold to set your phone to Vibrate Only
, press and hold to return to the previous sound
to launch and use Voice
() to adjust volume:
• In standby mode:
- Press to set Master Volume.
- Press and hold down to activate Sounds Off.
•
During calls:
- Press to adjust voice volume.
•
Press down to mute the ringtone of an incoming call.
Understanding Your Phone 17
Note:
1
2
3
You can also enter Camera mode in standby mode by
pressing
Menu
() ➔
Multimedia
➔
Camera
Speakerphone
Use the Speakerphone function to enable or disable the
speakerphone. This lets you conduct a call handsfree, and/or lets
you share a call with others.
To enter Speakerphone Mode
During a call, press
SPK
() ➔
Yes
soft key to activate
the speakerphone.
Caution!
While in Speakerphone mode, hold your phone away
from your ear. (For more information, refer to
“Responsible Listening” on page 107.)
To exit Speaker phone Mode
During a call, press
SPK
() ➔
Yes
soft key to deactivate the
speakerphone.
Voicemail Key
Use the
Voicemail Key
•
In standby mode, press and hold the
() to set up and check Voicemail.
Voicemail Key
()
Voicemail.
18
Understanding the Display Screen
.
1. The top line of the
phone’s display
contains icons
that indicate
network status,
battery power,
signal strength,
connection type,
and more.
2. The Main Clock
displays the day,
date, and time.
3. The bottom line of the screen displays current soft key
functions.
The sample screen displays that pressing the Left soft key
Messages
launches the Messages menu, pressing
displays the Main Menu, and pressing the Right (
soft key displays the Contacts
Find
screen.
Contacts
)
to call
Display Screen Icons
Your SCH-R270 phone lists definitions of the icons that display on
the top line of the screen.
To access the Icon Glossary:
In standby mode, press
Phone Info
➔
Menu
Icon Glossary
() ➔ Settings ➔
. The icons list displays.
Menu Navigation
Access the menus and sub menus in your phone using the
navigation key (), the left or right soft keys ( or ),
or use a shortcut.
1. In standby mode, press
2. Use the navigation key to browse through the menus.
3. To enter the menu or sub menu that displays on the
Menu
().
screen, press .
4. Press the soft key to return to the previous menu.
Navigate Using a Shortcut
You can also access menus and sub menus using menu
numbers. After pressing Menu (), press the menu number
to go directly to the menu or sub menu of your choice. Before you
can navigate using a shortcut, you must know the menu or
sub-menu number to access.
1. In standby mode, press
2. Press the number of the menu, sub menu, and other
Menu
().
information for the feature to access.
Example:
Press
Menu
takes you to the
the
(), then press , . This
Multimedia
Camera
(sub menu 1).
menu (Menu 8), and then to
Navigate Using Quick Search
Use the
Quick Search
feature to find a menu or menu item by
pressing the number keys that correspond to the first few letters
of menu or menu item name. (For more information, refer to
“Quick Search” on page 90.)
Understanding Your Phone 19
Dialogue Boxes
Dialogue boxes prompt for action, inform you of status, or warn
of situations such as low battery. Dialogue boxes and their
definitions are outlined below.
•
Choice
–
Example:
“Save Message?”
•
Reconfirm
–
Example:
“Erase All Messages?”
•
Performing
–
Example:
“Sending..” “Connecting..”
•
Completed
–
Example:
“Message Saved”
•
Information
–
Example:
“New Message”
•
Error
–
Example:
“System Error!”
•
Warning
–
Example:
“Low Battery,” “Memory Full!”
20
Section 3: Call Functions
This section explains how to make and answer calls. This section
also includes the features and functionality associated with
making or answering calls.
Making and Answering a Call
Making a Call
With the phone on, enter the number to call using the
keypad and press .
Answering a Call
Press to answer an incoming call.
Adjusting the Call Volume
In standby mode, repeatedly press the
down until the Call Volume Level desired displays on the screen.
The Volume key is on the left side of phone.
Dialing Emergency Numbers
It is import that you DO NOT depend on this phone as a primary
method of calling 911 or for any other essential or emergency
communications.
Volume
key ()
Because of various transmission methods, network parameters,
and user settings necessary to complete a call from your wireless
phone, a connection cannot always be guaranteed. Therefore,
emergency calling may not be available on all wireless networks
at all times.
To place an emergency call:
1. Turn on the phone and dial 911 using the keypad.
2. Press to place the call.
You can specify other numbers as emergency numbers using the
Emergency # settings. (For more information, refer to
“Emergency #” on page 87.)
Important!
Emergency number 911 is preset into your phone. You
can dial this number almost any time, even when the
phone is locked or restricted.
If you call 911 an audible tone plays and an Emergency
prompt displays on the screen for the duration of the
call.
Call Functions 21
Dialing International Numbers
Call Another Country –Manual Method
1. In standby mode, enter
011
(the three-digit exit code for
the United States).
2. Enter the country code.
3. Enter the number to call, then press .
Note:
Puerto Rico and Canada are on the North American dialing
plan. Making calls to Puerto Rico and Canada is similar to
making calls within the United States, no unique country
codes are necessary.
Call Another Country –Shortcut Method
1. In standby mode, press and hold until a plus sign (
displays on the screen.
Note:
When you press , your phone automatically replaces
this + with 011, the three-digit exit code for the United
States.
Manual Pause Calling
When you call automated systems (like banking services), you
are often required to enter a password or account number.
Instead of manually entering the numbers each time, you can
store the numbers in your Contacts along with special characters
called pauses.
•
2-Sec Pause
: A two-second pause stops the calling sequence for two
seconds then automatically sends the remaining digits.
•
Wait
: A hard pause stops the calling sequence until you
press .
To manually call a number with pause(s) without storing it to your
Contacts:
+
)
1. Enter the number to call.
2. Press the Options soft key.
3. Highlight the desired pause option and press to enter
the pause into your number sequence:
•
2-Sec Pause
•
Wait
: a two-second pause.
: a hard pause (awaits input from you).
2. Enter the country code for the country that you are calling.
3. Enter the number to call, then press .
22
Note:
If you select
select
4. Press to the number.
2-Sec Pause, P
Wait, W
displays on the screen.
displays on the screen. If you
Pause Dial from Contacts
•
If you voice dial a contact that contains (two-second) T pause(s)
simply wait for the pauses to pass and the dialing to complete.
•
If you voice dial a contact that contains (hard) P pause(s), wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, or other) and enter the appropriate
response(s).
1. If you stored the number using 2-second pause(s), simply
find the Contacts entry, highlight the number, and press
. (For more information, refer to “Finding a
Contacts Entry” on page 38.)
2. If you stored the number using Wait(s), find and dial the
number from Contacts and wait for the appropriate prompt
from the dialed number.
3. Press to resume dialing the number.
Making a Call using Speed Dial
You can store phone numbers and contact names in your phone’s
Contacts list. Speed Dialing lets you quickly and easily dial any
contact in your Contacts list by using that contact’s location
number in the list. You can assign and change location (speed
dial) numbers for your contacts. (See “Assigning a Speed Dial Location” on page 43.)
One-Touch Dialing
Speed Dial numbers 2 through 9 are special One-Touch dialing
numbers. You can call the phone numbers stored in your phone’s
Contacts list and assigned Speed Dial numbers 2 through 9 by
pressing and holding a single key.
Example:
For Speed Dial number 3, press and hold until the
name and number display and the number dials.
Two-Touch Dialing
Memory locations 10 through 99 are special Two-Touch dialing
locations.
Example:
For location number 13, briefly press , then press
and hold until the name and number displays and
the number dials.
Three-Touch Dialing
Memory locations 100 through 999 are special Three-Touch
dialing locations.
Example:
For location number 113, briefly press , briefly
press again, then press and hold until the
name and number displays and the number dials.
Call Functions 23
Pause Dialing From a Contacts Entr y
•
To speed dial a contact that contains (two-second) P pause(s) wait for
the pauses and dialing to complete.
•
To speed dial a contact that contains (hard) W pause(s), wait for the
prompt(s) from the number you called (credit card number, bank
account number, or other) then enter your digits.
Making a Call from Quick Search Dialing
Use the
Quick Search
Contacts list by pressing the number keys that correspond to the
first few letters of a Contact name. (For more information, refer to
“Quick Search” on page 90.)
Dialing a Contact using Quick Search
To find and dial a Contact, do the following:
1. In standby mode, press the number keys that correspond
to the first few letters of the Contact name.
2. Press the Up navigation key. The
desired Contact name, as shown.
3. If needed, use the Up and Down navigation keys to
highlight the Contact you wish to call.
4. Press to call the highlighted Contact.
feature to dial any number stored in your
Find
screen displays the
24
In-Call Options
You can access numerous menus and features while in a call.
1. While in a call, press the Options soft key.
The following menu items display:
•Speaker On/Off
call.
• Message
•Contacts
• Recent Calls
• Send DTMF
• Voice Privacy
•Location
: Enables/disables Speakerphone mode during this
: The
Messages
menu displays on the screen.
: The Contacts
: Lets you change your phone’s Location setting.
Find
screen displays on the screen.
: The
All Calls
Log screen displays on the screen.
: Send your phone number as DTMF tones.
: Select
Standard
or
Enhanced
voice privacy.
Voice Commands
Voice Commands is advanced speech recognition software that
recognizes your spoken commands to dial phone numbers,
create messages, and launch phone features such as Contacts,
Calendar and My Music.
The system prompts you to say a command. When the system is
listening, speak clearly and say the command. If you are
frequently prompted to repeat a command, go to the Settings
menu to train the system to your voice.
Note:
At each step, Voice Commands displays a list of available
commands.
If Voice Commands does not recognize your command, it
prompts for confirmation.
In standby mode, press and hold to launch Voice
Commands.
The following is a list of functions that you can perform
with Voice Commands:
• Call <Name or #>
: Say the name or number of the person to call,
or say voicemail or last number.
• Send <MSG Type>
• Go To <Menu>
•Check <Item>
•Contacts <Name>
: Select a message type: Text or Picture.
: Say the application name or menu item to open.
: View details about your phone’s status.
: Searches and displays a contact by name to
call. Ex: say “Contacts Aaron”.
•Redial
: Redials the last phone number called.
•Help
: Displays helpful information about the Nuance Voice Service.
Call <Name or #>
Place a call by speaking a contact name or telephone number.
1. In standby mode, press and hold .
The audio prompt “
Please say a command
” sounds and the
Voice Commands display.
2. Say “
Call
”, followed by:
•
“<
A Contact Name
•
for a contact. Or, say “Call”, followed by the t ype of number, Mobile,
>”, to call the default telephone number
Home, Work, or Pager.
•“<Telephone Number
•“Voicemail
•“Last Number
3. Follow the prompts to confirm your selection and place the
>” to dial phone number.
” to access voicemail.
” to dial the number for the most recent call record.
call.
Send <MSG Type>
Create a new message by speaking the type of message and the
recipient(s).
1. In standby mode, press and hold .
The audio prompt “
Please say a command
” sounds and the
Voice Commands display.
2. Say “
Send <Text, or Picture> Message to <contact name>”.
Call Functions 25
The new message opens, with the To: field populated with
your selection(s). Continue creating the message.
Go To <Menu>
Access a menu item by speaking the menu’s name.
1. In standby mode, press and hold .
The audio prompt “
Please say a command
” sounds and the
Voice Commands display.
2. Say “
Go to
”, followed by the name of a menu item, for
example, “Calls”, “Messages”, “Contacts”,
“Tools”, “Multimedia”, “Settings“, “Phone Settings”,
“Sound Settings” or other item. The item opens.
Check <Item>
Access device information by speaking the command.
1. In standby mode, press and hold .
The audio prompt “
Please say a command
” sounds and the
Voice Commands display.
2. Say “
Check
”, followed by a command:
• Status
: Displays status details about the phone such as levels for
the battery, data signal, missed calls, and more.
•Voicemail
•Messages
: Opens the Voicemail screen.
: Lists the status of all the message types including: New
Voicemail, New TXT Messages, and New Picture Messages.
26
• Missed calls
•Time
• Signal Strength
: Displays missed calls.
: Displays the current time and date.
: Displays and announces the current signal
strength level.
• Battery Level
•Volume
•My Number
Contacts <Name>
1. In standby mode, press and hold .
The audio prompt “
: Displays and announces the current battery level.
: Displays the Master Volume status.
: Displays the phone number assigned to this phone.
Please say a command
Voice Commands display.
2. Say “
Contacts
”, followed by a command:
•Call
: Followed by the contact name, dials the contact.
•Create New
: Displays the NEW CONTACT screen so you can create
a new contact.
•Modify
: Say the name of the contact t o modify. Displays the contact
information to modify.
•Erase
: Say the name of the contact to erase.
” sounds and the
Loading...
+ 101 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.