Samsung SCHN213 Users Manual
ELECTRONICS
Printed in Korea
Code No.: GH68-03xxxA
English.06/2003.Rev.1.0
World Wide Web
http://www.samsungmobile.com
* Some contents in this manual may differ from your phone
depending upon the software of the phone or your service
provider.
Please read this manual before operating your phone, and keep it
for future reference.
CELLULAR PHONE
SCH-N213
User’s Manual
1
IMPORTANT SAFETY PRECAUTIONS ............................................... 5
UNPACKING...................................................................................... 7
YOUR PHONE
Phone Layout ...................................................................................... 8
Display .............................................................................................. 11
Service Light ...................................................................................... 13
GETTING STARTED
Installing the Battery .......................................................................... 14
To Install the Battery ...................................................................... 14
To Remove the Battery ................................................................... 15
Charging the Battery ........................................................................... 15
Switching the Phone On/Off ................................................................ 17
Your Phone’s Modes ........................................................................... 18
CALL FUNCTIONS
Making a Call ..................................................................................... 20
Adjusting the Volume ..........................................................................26
Answering a Call .................................................................................27
Options During a Call .......................................................................... 28
Using Caller ID .................................................................................... 29
Viewing Missed Calls ........................................................................... 30
Quickly Switching to Vibrate Mode ....................................................... 30
Call Forwarding .................................................................................. 31
Call Waiting ........................................................................................31
Three-Way Calling ............................................................................... 32
SELECTING FUNCTIONS AND OPTIONS
Using the Soft Keys ............................................................................. 33
Selecting Functions and Options ........................................................... 34
Example: Setting the Display Language ...............................................35
Table of Contents
FCC RF EXPOSURE INFORMATION
In August 1996 the Federal Communications Commission (FCC) of
the United States with its action in Report and Order FCC 96-326
adopted an updated safety standard for human exposure to radio
frequency electromagnetic energy emitted by FCC regulated
transmitters. Those guidelines are consistent with the safety
standard previously set by both U.S. and international standards
bodies. The design of this phone complies with the FCC guidelines
and these international standards.
Use only the supplied or an approved antenna. Unauthorized
antennas, modifications, or attachments could impair call quality,
damage the phone, or result in violation of FCC regulations.
Do not use the phone with a damaged antenna. If a damaged
antenna comes into contact with the skin, a minor burn may result.
Please contact your local dealer for replacement antenna.
Body-worn Operation
This device was tested for typical body-worn operations with the
back of the phone kept 1.5 cm. from the body. To maintain
co mp l iance with FCC R F exposure requirements, use only belt-clips, holsters
or similar accessories that maintain a 1.5 cm. separation
distance between the user's body and the back of the phone,
including the antenna, whether extended or retracted. The use
of belt-clips, holsters and similar accessories should not contain
metallic components in its assembly. The use of accessories that
do not satisfy these requirements may not comply with FCC RF
exposure requirements, and should be avoided.
Contact your local dealer for optional accessory items.
Vehicle Mounted External Antenna (optional, if
available.)
A minimum separation distance of 7.9 inches (20cm) must be
maintained between a person and the vehicle mounted external
antenna to satisfy FCC RF exposure requirements.
For more information about RF exposure, please visit the FCC web
site at www
.fcc.gov
2 3
ENTERING TEXT
Changing the Text Input Mode .............................................................38
Using the T9 Mode .............................................................................. 39
Using the ABC Mode ............................................................................41
Using the Symbol Mode ....................................................................... 42
Using the 123 Mode ............................................................................ 43
USINGTHE MENUS
Accessing Menu Functions by Scrolling .................................................. 44
Accessing Menu Functions by Using its Shortcut .................................... 45
List of Menu Functions .........................................................................46
PHONE BOOK
Find (Menu 1-1) ............................................................................. 53
Add Entry
(Menu 1-2) ..................................................................... 54
Group
(Menu 1-3) .......................................................................... 57
Memory Status
(Menu 1-4) ..............................................................58
MESSAGES
Write (Menu 2-1) ............................................................................. 89
Inbox
(Menu 2-2) ........................................................................... 91
Outbox
(Menu 2-3) ......................................................................... 92
Saved
(Menu 2-4) ........................................................................... 93
Templates
(Menu 2-5) .................................................................... 94
Erase Messages
(Menu 2-6) ............................................................. 94
Settings
(Menu 2-7) ........................................................................ 95
Voice Mail
(Menu 2-8) ..................................................................... 94
CALL HISTORY
Missed (Menu 3-1) .......................................................................... 51
Received
(Menu 3-2) ...................................................................... 51
Dialled
(Menu 3-3) ......................................................................... 50
Erase History
(Menu 3-4) ................................................................ 52
Call Duration
(Menu 3-5) ................................................................ 52
SOUND
Ring Tones (Menu 4-1) ................................................................... 63
Ringer Volume
(Menu 4-2) .............................................................. 62
Alerts
(Menu 4-3) ........................................................................... 64
Key Tones
(Menu 4-4) ..................................................................... 63
Power On/Off Melody
(Menu 4-5) .................................................. 63
DISPLAY
Language (Menu 5-1) ..................................................................... 65
Service Area
(MENU 5-2) ............................................................... 67
Wallpaper
(MENU 5-3) .................................................................. 66
Banner
(MENU 5-4) ...................................................................... 66
Backlight
(Menu 5-5) ...................................................................... 65
Set Dual Clock
(MENU 5-6) ........................................................... 66
ORGANIZER
Scheduler (Menu 8-1) ..................................................................... 78
Task List
(Menu 8-2) ....................................................................... 82
Memo Pad
(Menu 8-3) .................................................................... 86
Alarm
(Menu 8-4) ........................................................................... 86
Calculator
(Menu 8-5) ..................................................................... 84
World Time
(Menu 8-6) ................................................................... 85
Count Down
(Menu 8-7) ................................................................. 83
SETTINGS
Call (Menu 7-1)................................................................................ 68
Phone/System
(Menu 7-2)............................................................... 69
Security
(Menu 7-3)......................................................................... 71
Voice Privacy
(Menu 7-4) ................................................................ 71
Clear Phone Book
(Menu 7-5) .......................................................... 72
Reset Phone
(Menu 7-6.................................................................... 72
54
HEALTH AND SAFETY INFORMATION
Precautions When Using Batteries ....................................................... 97
Road Safety ....................................................................................... 99
Operating Environment .................................................................... 101
Electronic Devices ............................................................................. 101
Potentially Explosive Atmospheres .................................................... 103
Emergency Calls ............................................................................... 104
Other Important Safety Information .................................................. 105
Care and Maintenance ...................................................................... 106
GLOSSARY .........................................................................108
INDEX ............................................................................... 111
QUICK REFERENCE CARD .................................................... 115
Important Safety
Precautions
Read these guidelines before using your wireless phone.
Failure to comply with them may be dangerous or
illegal.
Road Safety at All Times
Do not use a hand-held phone while driving; park the
vehicle first.
Switching Off When Refueling
Do not use the phone at a refueling point (service
station) or near fuels or chemicals.
Switching Off in Aircraft
Wireless phones can cause interference. Using them in
aircraft is both illegal and dangerous.
Switching Off in Hospitals
Switch off your phone near medical equipment.
Follow any regulations or rules in force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Special Regulations
Meet any special regulations in force in any area and
always switch off your phone whenever it is forbidden
to use it, or when it may cause interference or danger
(in a hospital for example).
76
Travel Adapter
Handset Headset
Battery
User’s Manual
Hand Strap
Unpacking
Your package contains the following items.
IImmppoorrttaanntt SSaaffeettyy PPrreeccaauuttiioonnss
In addition, you can obtain the following accessories for
your phone from your local Samsung dealer:
• Dummy Cradle
• Cigarette Lighter Adapter
• Headset
• Data Cable(USB support)
• Holster
Note:
This phone can be used as a wireless modem, by using
the Data Cable for connecting the phone to the USB port
of a PC or Laptop. You need to purchase the Data
Cable/Driver to use this feature.
Contact Reliance for further information.
Sensible Use
Use only in the normal position (held to the ear). Avoid
unnecessary contact with the antenna when the phone
is switched on.
Emergency Call
Ensure the phone is switched on and in service.
Key in the emergency number for your present location,
then press <Call>. If certain feature are in use,
deactivate those features before you can make an
emergency call. Give all the necessary information as
accurately as possible. Do not cut off the call until given
permission to do so.
Water Resistance
Your phone is not water-resistant. Keep it dry.
Accessories and Batteries
Use only Samsung-approved accessories and batteries.
Qualified Service
Only qualified service personnel may install or repair
your phone.
For more detailed safety information, see “Health
and Safety Information” on page 108.
98
YYoouurr PPhhoonnee
Perform the functions indicated by the text
above them, on the bottom line of the
display.
In menu mode, scroll through the menu
options and Phonebook memory.
In standby mode, enters the View
Month menu, enters the Find
Name menu.
Key Functions
Service light
Antenna
Headset jack
Adapter outlet
Earpiece
Display
Volume/Scroll keys
During a call, adjusts
the voice volume.
In standby mode,
adjusts the key beep
volume.
In menu mode,
scrolls through the
menu options.
Microphone
Your Phone
Phone Layout
The following illustrations shows the main elements of
your phone.
Makes or answers a call.
In standby mode, redials the last outgoing
number when pressed twice or held down.
Ends a call. Also switches the phone on
and off when held down.
In menu mode, cancels your input and
returns to standby mode.
Deletes characters from the display.
In menu mode, returns to the previous
menu level.
In standby mode, quickly launches
R World when held down.
(soft keys)
Enters numbers, letters and some special
characters.
~
1110
YYoouurr PPhhoonnee
Display
Layout
The display has three areas.
Icons area
Text and
graphic area
Signal Strength : Shows the received
signal strength. The greater the number of
bars, the better the signal.
Icons
Service: Appears when a call is in
progress.
No Service: Appears when you are outside
a service area. When it appears, you cannot
make or receive calls.
YYoouurr PPhhoonnee
Key Functions (continued...)
Soft key
indications area
Menu S M S
In standby mode, activates the key guard
mode when held down.
In menu mode, scroll through the menu
options.
In text input mode, changes the case.
Also, use this key for special star calling
feature.
In standby mode, enters or exits vibrate
mode when held down.
In menu mode, scroll through the menu
options.
In text input mode, inserts a space.
Also, it is used at various times when
you dial especially when using
teleservices.
New Message: Appears when a new text
message is received.
1312
Backlight
A backlight illuminates the display and the keypad.
When you press any key, the backlight lights up. It turns
off if no key is pressed within a given period of time,
depending on the Backlight option set under the
Display menu.
In key guard mode, the backlight turns on only when you
press .
To specify the length of time the phone waits before the
backlight turns off, set the Backlight menu option
(Menu 5-2); see page 65 for further details.
Service Light
The service light is on the top left of the phone. It
flashes to indicate an incoming call or message. It also
flashes for a few seconds when you turn the phone on
or off.
YYoouurr PPhhoonnee YYoouurr PPhhoonnee
Alarm: Appears when you set an alarm.
Battery Strength: Shows the level of your
battery. The more bars you see, the more
power you have left.
Vibrate mode: Appears when vibrate mode
turns on. Incoming calls vibrate the phone
instead of ringing.
Vibrate Mode: Appears when vibrate
mode is activated.
Voice Privacy: Appears when the Voice
Privacy feature is activated.
Other Icons
Ringer Off: Appears when you set the
Ringer Vol option to Off.
Key Guard Mode: Appears when the key
guard mode is activated.
14
GGeettttiinngg SSttaarrtteedd
15
Getting Started
Installing the Battery
To Install the Battery
1. Place the battery so that the tabs on it align with the
slots on the back of the phone.
2. Slide the battery toward the top of the phone until it
clicks into place.
To Remove the Battery
1. If necessary, switch off the phone by holding down
until the power-off graphic begins playing.
2. Push the catch above the battery on the back of the
phone.
3. Slide the battery toward the bottom of the phone and
lift it away.
Charging the Battery
Your phone is powered by a rechargeable Li-ion battery.
A travel adapter comes with your phone. Use only
approved batteries and chargers. Ask your local
Samsung dealer for further details.
You can use the phone while the battery is charging.
Note: You must fully charge the battery before using
your phone for the first time. A discharged battery
is fully recharged in approximately 3 hours.
17
GGeettttiinngg SSttaarrtteedd
Switching the Phone On or Off
1. Press and hold down for more than one second
to switch the phone on.
The service light on the left of the phone flashes, and
an alert sounds. When the system locates services, it
displays the date and time. You can now place and
receive calls.
If the phone is out of the service area, the No Service
icon ( ) appears on the display and you cannot make
and receive calls. You can try again later when service
is available.
Note: You can change the display language. To
change the language, use the Language menu
option (Menu 5-1); for further details, refer to
page 65.
2. When you wish to switch the phone off, hold down
for more than two seconds.
Note: If you want to switch the phone off in key guard
mode, unlock the keys first by pressing and
holding .
Mon 23 Dec 14:02
Reliance
16
GGeettttiinngg SSttaarrtteedd
1. With the battery in position on the phone, plug the
connector of the travel adapter into the connector slot
at the bottom of the phone.
2. Plug the adapter into a standard AC wall outlet.
The service light indicates the status of the battery
being charged.
• Red: the battery is charging.
• Green: the battery is fully charged.
• Orange: the battery is not plugged properly or
operating at a temperature that is too high or too
low. Please check the adapter and battery.
3. When charging is finished and the lamp on the
charger turns green, unplug the adapter from the AC
wall outlet and then from the phone.
Low Battery Indicator
When the battery is weak and only a few minutes of
talk time remain, the battery sensor lets you know by
blinking an empty Battery Strength icon ( ), you will
hear a warning tone and a message will be repeated at
regular intervals on the display. When the battery
becomes too weak for the phone to operate, it switches
off automatically.
Menu Find
19
GGeettttiinngg SSttaarrtteedd
18
GGeettttiinngg SSttaarrtteedd
Your Phone’s Modes
Standby Mode
Standby is the most basic state of your phone. The
phone goes into standby mode after you turn it on, or
whenever you briefly press . When your phone is in
standby mode, you will typically see the banner
message and current date and time. If you enter a phone
number, you can press to dial it or press the Save
soft key to save it in the internal Phonebook.
Press at any time to return to standby mode. Be
careful; if you are on a call when you press , you
will disconnect the call and return to standby mode.
Press several times or hold it down to return to
standby mode without ending the call.
The Main Menu can be accessed when you are in
standby mode.
Talk Mode
You can place and answer calls only when your phone is
turned on. During a call, the phone is in Talk mode.
While you are in talk mode, pressing the Menu soft key
gives you a list of options. See page 28 for details on
the options.
Power Save Mode
Your phone comes with a Power Save feature that will
automatically be activated if your phone is unable to find
a signal after 15 minutes of searching. While this feature
is active, the phone’s battery charge is conserved. The
phone will automatically recheck for a signal periodically.
To manually force the phone to recheck for a signal,
press any key. A message on the display lets you know
when your phone is operating in power save mode.
Key Guard Mode
You can lock the keypad by pressing and holding in
standby mode. You can prevent accidental key pressing
with this key guard mode.
To unlock your keypad, press and hold .
When you have incoming calls in key guard mode, the
key guard is automatically deactivated and the phone
goes to standby mode. The key guard will be
automatically activated after the predetermined amount
of time.
Lock Mode
When you lock your phone using the Lock Mode menu
option (Menu 7-1) in the Security menu, you cannot use
the phone’s features. In lock mode, you can receive
messages and calls, but you cannot place an outgoing
call until you unlock the phone.
For details about locking and unlocking your phone, see
page 73.
21
CCaallll FFuunnccttiioonnss
20
Making a Call from the Phonebook
You can store the phone numbers that you use regularly
in the phone’s memory, which are collectively called the
Phonebook. Simply select the required name to recall
the associated number to dial.
For further details about the Phonebook feature, refer to
page 53.
Redialling the Last Number
To redial the last call you made, press twice
quickly or press and hold the key down.
Your phone stores the last 10 numbers you dialled. To
redial any of these numbers:
1. If you have typed any characters on the display, press
to return to standby mode.
2. Press to display the list of the dialled numbers.
3. Use and to scroll through the numbers
until the required number display.
4. To dial the number displayed, press .
Call Functions
Making a Call
In standby mode, enter the area code and phone number
and press .
Note: If you have set Auto Redial option (Menu 6-1-1) to
On, the phone will automatically retry the call up
to 10 times when a connection fails.
See page 68.
Correcting the Number
To clear Action
the last digit press .
displayed
the whole display hold down for more
than one second.
Ending a Call
When you want to finish your call, briefly press .
If you press , the call time, or the length of the call,
displays briefly and the phone returns to standby mode.
23
CCaallll FFuunnccttiioonnss
22
CCaallll FFuunnccttiioonnss
Emergency Dialling
You can place emergency call from your priority number
list even if your phone is locked. For further information
on emergency numbers, see page 75.
Prepend Dialling
The prepend option lets you add digits such as area
codes and network feature activation codes to a phone
number that is in your internal Phonebook or Call Logs.
To prepend existing phone numbers in the Phonebook or
Call Logs:
1. Access a phone number entry in a Call log or your
Phonebook. See page 21 or page 53.
2. When the desired phone number displays, press the
Option soft key to access the Options menu.
3. Press or until Prepend highlights.
4. Press the OK or Select soft key.
5. Enter the area code or feature code.
6. Press to dial the number.
Speed Dialling
Once you have stored phone numbers in the phonebook
memory, you can dial them easily whenever you want.
You can assign upto 300 numbers for Speed Dialling.
One-Touch Dial
You can dial the phone numbers stored in the
phonebook memory from 01 through 09 simply by
pressing one button.
Press and hold the third digit of the memory location
containing the number to be dialled.
For example: Location no. 009
press and hold .
The stored number and name display and then the
phone dials the number.
Two-Touch Dial
Memory locations 10 through 99 are special two-touch
locations.
Press the second digit briefly, then hold down the third
digit of the memory location.
For example
: Location no. 023
Press briefly and hold down .
The stored number and name display and then the
phone dials the number.
24
CCaallll FFuunnccttiioonnss
25
CCaallll FFuunnccttiioonnss
Three-Touch Dial
Memory locations 100 through 300 are special threetouch locations.
Press the first and the second digits briefly, and then
hold down the third digit of the memory location.
For example: Location no. 123
Press and briefly and hold down
.
The stored number and name display and then the
phone dials the number.
Note: When several numbers are saved in one location,
only the phone number which is specified with
the Speed dial label will be automatically dialled.
For details, refer to page 55.
Pause Dialling
When you call automated systems, like banking
services, you are often required to enter a password or
account number. Instead of manually entering the
numbers each time, you can store them in your
Phonebook, separated by special characters, which are
called pauses.
To store a number in your Phonebook that contains
pauses:
1. Enter the phone number you want to store, such as
the bank’s tele-service phone number.
2. Press the Pause soft key.
The letter “P” displays within the number, meaning
that a hard pause will occur at that point in the
calling sequence.
3. Continue entering numbers and using the Pause soft
key to enter pauses.
4. Store the number in your Phonebook as you normally
would by pressing the Save soft key and following
the screen prompts.
Pause Dialling from a Stored Phonebook Entry
1. Dial the number from the Phonebook.
2. Wait for the appropriate prompt for the number, such
as a credit card number or a bank account number.
3. When prompted, press to send the DTMF (DualTone Multi-Frequency) number that follows your
pause.
Manual Pause Dialling
You can enter pauses manually during the dialling
process.
1. Enter the phone number of the service you want to
connect to, such as a bank’s tele-service phone
number.
2. Press the Pause soft key.
The letter “P” displays within the number, meaning
that a hard pause will occur at that point in the
calling sequence.
27
CCaallll FFuunnccttiioonnss
26
CCaallll FFuunnccttiioonnss
3. Continue entering the number and using the Pause
soft key to enter pauses.
4. When the number is completed, press to make a
call to the number.
Adjusting the Volume
During a call, if you want to adjust the voice volume,
use the volume keys on the left side of the phone.
Press the upper part to increase the volume level and
the lower part to decrease the level. After adjusting the
volume level, press the OK soft key.
In standby mode, you can adjust the key beep volume
using these keys.
Answering a Call
When someone calls you, the phone rings and displays
the phone icon in the middle of the display.
When the caller can be identified, the caller’s phone
number, or name, if it is stored in your Phonebook,
displays. If the caller cannot be identified, only the
phone icon displays.
1. To answer a call, press .
If the Answer Mode menu option (Menu 6-1-2) is
set to By any key, you can answer the call by
pressing any key, except for and the volume
keys.
If the menu is set to By send key, you must press
to answer the call. For further details on the
Answer Mode menu, see page 68.
When you press or the volume key once, when a
call is received, the phone stops ringing or vibrating
depending on the mode it is in. You can still answer
the call by pressing . Press twice to
disconnect without answering the call.
2. To end an answered call press .
Note
: You can answer a call while using the phone
book or menu features. The current operation will
be interrupted.
29
CCaallll FFuunnccttiioonnss
28
CCaallll FFuunnccttiioonnss
Options During a Call
Your phone provides a number of control functions that
you can use during a call. As many of the functions are
network services, you may not be able to use all of them
at all times.
Press the Menu soft key during a call to access the
following options:
Mute/Quit: allows you to switch your phone’s
microphone off or on. When you mute the microphone,
the other party cannot hear you.
For example
: You wish to say something to another
person in the room but do not want the other party to
hear you.
Calls: allows you to access the Calls menu. See page
50 for details.
Phone Book: allows you to access the Phone Book
menu. See page 53 for details.
Silent/Quit: allows you to switch the key tones off or
on. By switching the tones off, you can press the keys
without hearing annoying key tones during a call.
Version: allows you to view the software and hardware
version of your phone.
Voice Privacy : encrypts the voice channel so that
people cannot eavesdrop on your conversation. For
further details, see page 77.
Clear Voice : allows you to switch whisper mode on to
increase the receiving sensitivity of the microphone. See
page 71 for further details.
Send DTMF : allows you to send the DTMF tones of the
displayed number.
Using Caller ID
This feature tells you who is calling you by displaying
the caller’s number when the phone rings. If a caller’s
name and number are stored in your Phonebook, the
corresponding name displays along with the number. If
you call someone whose phone is available this feature,
your phone number displays on her or his phone.
Note: For further details about the Caller ID service,
contact Reliance.
31
CCaallll FFuunnccttiioonnss
30
CCaallll FFuunnccttiioonnss
Viewing Missed Calls
Your phone keeps a list of calls that you do not answer
when the phone is on and service is available. The
phone indicates a missed call by displaying a text
notification on the screen. Additionally, if caller
information is available, the screen displays the phone
number of the most recent missed call.
Press or Redial soft key to call the displayed
number.
To view missed calls, access the Missed menu option
(Menu 1-3). For further details, see page 51.
Quickly Switching to Vibrate Mode
The vibrate mode disables all sounds on the phone. This
feature is best used in situations where the phone might
disturb others, such as in a meeting, at a library or in a
theater. You can switch your phone to vibrate mode with
one touch of a key.
In standby mode, to enter the vibrate mode, press and
hold down until “Entering Vibrate Mode” and the
Vibrator icon ( ) display.
To exit the vibrate mode and reactivate the previous
sound settings, press and hold down again until
“Exit Vibrate Mode” appears. The Vibrator icon no
longer displays.
Call Forwarding
This feature provides the option of forwarding incoming
calls to another phone number, even while your phone is
turned off. Activating Call Forwarding does not affect
outgoing calls made from this phone.
Note: Contact Reliance for availability.
Call Waiting
The Call Waiting feature allows you to receive another
call while you have a call in progress. Your phone alerts
you to a call waiting by beeping and displaying “Call
Waiting.”
Your phone provides the option of turning the Call
Waiting feature on and off, if you have subscribed to the
service. Call Waiting is on by default in the phone. If you
choose to have a undisturbed conversation, simply turn
off the feature for the current call.
Note: Contact Reliance for availability.
To answer a waiting call:
1. Press and the current call is put on hold and you
can answer the waiting call.
2. Press again to switch between the two calls.
Note: If you do not answer a waiting call, the phone will
forward the call to voicemail or another number
that you have set up. Contact Reliance for more
information.
3332
CCaallll FFuunnccttiioonnss
Three-Way Calling
This feature allows up to three people to take part
simultaneously in a call. The phone records each party
into the Dialled Calls Log. Also, You are billed airtime
for each outgoing call separately.
Note: Contact Reliance for availability.
To place a Three-Way call:
1. During a call, press and the first participant is
automatically put on hold.
2. Enter a phone number of the second participant, and
press .
3. When you are connected to the second participant,
press to begin the three-way call.
If one of the callers hangs up, the call ends with that
participant, but you can continue to talk with the other
participant. If you initiated the call and you hang up
first, all three parties are disconnected.
Selecting Functions
and Options
Using the Soft Keys
Your phone offers a set of functions that allow you to
customize it. These functions are arranged in menus and
sub-menus, accessed via the two soft keys marked
and . Each menu and sub-menu allows you to view
and alter the settings of a particular function.
The roles of the soft keys vary according to the current
context; the label on the bottom line of the display just
above each key indicates its current role.
Example:
Menu Find
Press the left soft
key to access the
menu options.
Press the right
soft key to access
the SMS feature.
Reliance
Mon 23 Dec 14:02
34
SSeelleeccttiinngg FFuunnccttiioonnss aanndd OOppttiioonnss
35
SSeelleeccttiinngg FFuunnccttiioonnss aanndd OOppttiioonnss
Selecting Functions and Options
To view the various functions/options available and
select one required:
1. Press the appropriate soft key.
2. To Press
select the: the Select soft key.
• function displayed
or
• options highlighted
view the next function or .
or highlight the next
option in a list
move back to the or .
function or option
in a list
move back up one the Back soft key or
level in the structure .
exit the structure .
without changing the
settings.
In some functions, you may be asked for a lock code.
Enter the required code.
Example: Setting the Display Language
1. When the idle screen displays, press the Menu soft
key to enter the menu mode.
2. Scroll through the menus until you reach the Display
menu, by pressing .
3. To enter the Display menu, press the Select soft
key.
Mon 23 Dec 14:02
Reliance
Menu S M S
5:Display
Select Back
1:Language
2:Backlight
3:Banner
Select Back
Loading...