All Intellectual Property, as defined below, owned by or which is
otherwise the property of Samsung or its respecti ve suppliers
relating to the SAMSUNG Phone, including but not limited to,
accessories, parts, or software relating ther e to (the “Phone System”),
is proprietary to Samsung and protected under federal laws, state
laws, and international treaty provisions. Intellectual Pr operty
includes, but is not limited to, inventions (patentable or
unpatentable), patents, trade secrets, copyrights, software,
computer programs, and related documentation and other works of
authorship. You may not infringe or otherwise violate the rights
secured by the Intellectual Property. Moreover, you agree that you
will not (and will not attempt to) modify, prepare deriva tive works
of, reverse engineer , decompile, disassemble, or otherwise attempt to
create source code from the softwar e. No title to or ownership in the
Intellectual Property is transferred to you. All applicable rights of the
Intellectual Property shall rema in with SAMSUNG and its suppliers.
Samsung T elecommunications America (ST A), L.P.
Headquarters:Customer Care Center:
1301 E. Lookout Drive1000 Klein Street
Richardson, TX 75082Plano, TX 75074
2006 Samsung Telecommunications America, L.P. is a registered
trademark of Samsung Electronics America, Inc. and its related
entities.
Disclaimer of Warranties; Exclusion of Liability
Licensed by Qualcomm Incorporated under one or more of the
following patents: U.S. Patent No. 4, 901, 307; 5 , 056, 109; 5, 099, 204;
5, 101, 501; 5, 103, 459; 5, 107, 225; 5, 109, 390.
GH68-09387A
Openwave® is a registered Trademark of Openwave, Inc.
RSA® is a registered Trademark RSA Security, Inc.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY
CONT AINED ON T HE WARRANTY PAGE ENCLOSED WITH
THE PRODUCT , THE PURCHASER T AKES THE PRODUCT “AS
IS”, AND SAMSUNG MAKES NO EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE
MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR
ANY PARTICULAR PURPOSE OR USE; THE DESIGN,
CONDITION OR QUALITY OF THE PRODUCT; THE
PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP
OF THE PRODUCT OR THE COMPONENTS CONTAINED
THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO. NOTHING
CONTAINED IN THE INST RUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TO THE PRODUCT . IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR
ARISING FROM THE BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR
BENEFITS.
Care and Maintenance ..................................................207
Section 15: Warranty Information .................209
Standard Limited Warranty ...........................................210
Index ...............................................................217
8
Section 1: Getting Started
Topics Covered
• Understanding this User Manual
• Activating Your Phone
• Charging the Battery
• Setting Up Your Voice Mail
This section explains how to start using your phone
by activating your service, setting up your voice
mail, or getting an understanding of how this
manual is put together.
Section 1
Section 1: Getting Started9
Understanding this User Manual
The chapters of this guide generally follow the same
order as the menus and sub-menus in your phone. A
robust index for quick reference t o most featur es be gins
on page 217.
Also included is important safety information that you
should know before using your phone. Most of this
information is near the back of the guide, beginning on
page 181.
Notes and tips
Throughout this guide are icons and text that are set
apart from the rest. These are intended to point out
Section 1
important information, quick methods for activating
features, to define terms, and more. The definitions for
these methods are as follows:
• Notes: Explain alternative options within the current feature,
menu, or sub menu.
• Tips: Provide quick or innovative methods for performing
functions related to the subject at hand.
• Fast Facts: Are like snippets from a glossary. Fast facts
provide definitions in context and proximity to the menu or
feature in question.
• Important: Points out important information about the current
feature that could affect performance, or even damage your
phone.
10
Activating Your Phone
Activating Your Phone
Contact your Wireless Carrier and follow their
instructions for obtaining service, if necessary. We
suggest that you read this guide to fully understand the
services your phone supports.
Install the Battery
Note: Your phone comes packaged with a partially charged rechargeable
standard Li-Ion battery and travel adapter.
Important: You must fully charge the battery the first time you use your
phone, otherwise you could damage the battery. You can use your phone
while the battery is charging, but the battery wi ll take longer to recharge.
1. Insert the top end of the
battery first, matching the
gold contacts on the top end
of the battery to those inside
of the phone.
2. Press the bottom end of the battery down into the phone.
3. Place the battery cover over
the battery and slide the
cover upward into place.
Section 1
Section 1: Getting Started11
Turn Your Phone On
1. Open the folder on your phone, as
shown.
2. Press the key.
3. The phone begins searching for a
network signal.
4. Once the phone finds a signal, the
time, date and day appear in the
bottom of the display.
5. You’re now ready to place and
receive calls.
Section 1
Tip: Your phone has an internal antenna. Do
not touch the phone case over the antenna
while using your phone as this can affect
call quality and can cause the phone to
operate at a higher power level than is
necessary.
Note: If you are outside of your carrier’s coverage or roaming area, the No
Service icon ( ) appears at the top of the phone’s display. If you cannot
place or receive calls, try later when service is available, or at another
location.
Antenna
Turn Your Phone Off
䡲 Press and hold the key for two or more seconds. Your
phone powers off.
Press
Note: If your phone is on and you press for less than one second, the
phone will not power off. This prevents your phone from being turned off
accidentally.
12
Charging the Battery
1
2
3
4
Remove the Battery
Important! You must unplug the Travel Adapter (if it is connected) before
removing the battery from the phone during charging to avoid damage.
1. Press and hold the key to turn off the phone (if on).
2. Press the battery cover at
point (1) and slide the cover
(2) toward the bottom end of
the phone.
3. Lift the battery cover (3) up
and away from the phone,
bottom end first.
4. Lift the battery (4) up and
away from the phone, bottom
end first.
Charging the Battery
Your phone is powered by a rechargeable standard LiIon battery. Only use Samsung-approved char ging
devices and batteries. Samsung accessories are
designed to maximize battery life. Using other
accessories may invalidate your warranty and may
cause damage.
Section 1
Section 1: Getting Started13
Use the Travel Adapter
The travel adapter included with
your phone is a convenient, lightweight charger that rapidly
charges your phone from any
120/220 VAC outlet.
1. Plug the large end of the Travel Adapter into a standard
120 VAC or 220 VAC wall outlet.
Note: For connection to an electrical supply not located in the U.S., you
must use an adaptor of the proper configuration for the power outlet. Use
of the wrong adapter could damage your phone and void your warranty.
Section 1
2. Insert the smaller end of the
Travel Adapter into the charger/
accessory connector at the
bottom end of your phone.
Note: With the phone turned OFF, a discharged battery recharges fully in
approximately 3 hours.
Low battery indicator
The battery indicator () in the upper-right corner of
the display indicates power level. Monitor the battery
strength and ensure your battery is adequately charged.
• Four bars () indicate a full charge.
• An empty battery icon () indicates a near empty battery.
• A blinking empty battery icon () and a tone sounding
indicate you have two to three minutes before the battery is too
low to operate the phone.
14
Setting Up Your Voice Mail
If you continue to use your phone without charging its battery,
the phone shuts down.
Setting Up Your Voice Mail
V oice mail allows callers to leave voi ce messages, which
can be retrieved any time.
Note: Once your voice mail account has been set up, you can use the
Voice Mail folder (under the Message menu) to view details of voice
messages in your voice mail box.
1. In idle mode, press and hold the key or dial your
own mobile number to dial voice mail.
2. Follow the prompts in the new us er tutorial to se tup your
mail box.
Listen to voice mail
1. In idle mode, press and hold the key or dial your
own mobile number to dial voice mail.
2. After connecting, you are prompted to enter your
password.
Section 1
Section 1: Getting Started15
Section 1
16
Section 2: Understanding Your Phone
Topics Covered
• Features of Your Phone
• Closed View of Your Phone
• Open View of Your Phone
• Command Keys
• Understanding the Display Screen
• Your Phone’s Modes
This section outlines some key features of your
phone. This section also explains the screen and the
icons that are displayed when the phone is in use.
Section 2
Section 2: Understanding Your Phone17
Features of Your Phone
• 128 X 160 pixel Liquid Crystal Display
• High speed data (CDMA 2000 1X Technology)
• Global Positioning Technology (GPS)
• PIM functions (Scheduler, To Do List, etc.)
• Short Message Service (SMS)
• Enhanced Message Service (EMS)
• Voice Dial
• Speakerphone
Section 2
18
Closed View of Your Phone
1. Headset Connector
2. External LCD
3. Volume Key
Closed View of Your Phone
4. Speaker
5. Speakerphone Key
1. Headset Connector
3. Volume Key
5. Speakerphone Key
Command Keys and Features
1. Headset Connector — Used for handsfree,
Teletypewriter (TTY), and Telecommunication Device for
the Deaf (TDD) equipment.
2. External LCD — Indicates when you have an incoming
call or a message.
Section 2: Understanding Your Phone19
Section 2
3. Volume Key — Lets you adjust the ringer volume in
standby mode (with the folder open) or adjust the voice
volume during a call. To mute the ringer during an
incoming call, press the volume key up or down.
4. Speaker — The speaker , on the front of the folder, plays
sounds such as ring tones and alerts.
5. Speakerphone Key — Lets you enable and disable
speakerphone mode.
Open View of Your Phone
1. Speaker
Section 2
2. Left Soft Key
3. SEND Key
4. Clear Key
5. Voice Mail Hot Key
16. Earpiece
15. Internal Display
14. Navigation Key
13. Right Soft Key
12. OK Key
11. END/Power/Menu Exit Key
10. Voice Recognition Key
9. Alpha-numeric Keys
20
6. Special Function Keys
7. Microphone
8. Power/Accessory
Connector
Open View of Your Phone
Command Keys and Features
1. Speaker — The speaker , on the front of the folder, plays
sounds such as ring tones and alerts.
2. Left Soft Key — Performs the functions indicated by the
screen text on the bottom of the internal display.
3. SEND Key — This key is used to initiate your calls.
4. CLR (clear) Key — Deletes characters from the display
when you are in text entry mode. When in a menu, press
to return to the previous menu.
5. Voice Mail Hot Key — Press and hold to automatically
dial your voicemail.
6. Special Function Keys — Enter special characters.
Perform various functions.
7. Microphone — The microphone used during phone
calls and voice memo recordings.
8. Power/Accessory Connector — Used to plug in the
Travel Charger and to connect any available accessory
cable.
9. Alpha-numeric Keys — Use these keys to enter
numbers, letters, and characters.
10.Voice Recognition Key — Lets you access your
phone’s voice recognition features.
11.END/Power/MENU Exit Key — Ends a call. Press and
hold this key for a few seconds to turn your phone On or
Off. When you receive an incoming call, press to mute
the ringer and send the call to Voice Mail.
Section 2
Section 2: Understanding Your Phone21
12.OK Key — Pressing when navigating through a menu
accepts the highlighted choice in the menu.
13.Right Soft Key — Performs the functions indicated by
the screen text on the bottom of the display.
14.Navigation Key — In menu mode, lets you browse and
highlight menu options.
15.Internal Display — Displays the numbers, messages,
and icons you need to operate your phone.
16.Earpiece — Plays sounds such as caller voices and call
progress tones.
Command Keys
Functions for the soft keys are defined by what appears
above each in the display. There are two soft keys, the
left soft key and the right soft key .
Left Soft Key
Some functions of the left soft key are as follows.
Section 2
• In standby mode, press the MENU (left) soft key ( ) to open the
main menu.
• When the left soft key function is Options, press the Options
(left) soft key ( ) and a pop-up menu appears.
• When the left soft key function is Edit, press the Edit (left) soft
key ( ) to edit a Contact.
Right Soft Key
Some functions of the right soft key are as follows.
• In standby mode, press the MESSAGE (right) soft key ( ) to
open the Messages menu.
22
Command Keys
• When the right soft key function is Back, pres s the Back (right)
soft key ( ) to back up one menu level.
OK Key
• In a menu, press the OK key () to accept the highlighted
selection.
• When the OK key function is Edit, press the Edit (OK) key ()
to edit a Draft message.
OK
OK
Clear Key
The CLR key () is used to erase or clear numbers,
text, or symbols from the display. You can also use the
key to return to a previous menu or to return to
standby mode from any menu.
1. If you enter an incorrect character, briefly press to
backspace (and delete) the character.
2. To erase the entire sentence, press and hold .
3. To back up one menu level, briefly press .
4. To return to standby mode, press and hold until you
return to standby mode.
End Key
1. Press and hold the End key to turn your phone on or
off.
2. Briefly press once to disconnect a call.
3. Press to return to standby mode from any menu, or to
cancel the last input.
Section 2
Section 2: Understanding Your Phone23
Send Key
The Send key is used to answer calls, dial calls, and
to recall the last number(s) dialed, received, or missed.
1. Press once to answer calls.
2. Enter a number and briefly press to make a call.
3. Briefly press in standby mode to display a list of
recent calls to and from your phone.
4. Press twice in standby mode to call the most recent
number.
5. Press to pick up a waiting call. Press again to
switch back to the other call.
Navigation Key
Use the directional keys on the navigation key to
browse menus, sub menus, and lists. Each key also acts
as a shortcut to launch applications.
Speakerphone Key
Use the speakerphone key ( ) — located on the right
side of your phone — to switch from using the earpiece
Section 2
to the speakerphone before or during a call. Use the
volume keys — located on the left side of your phone
— to adjust the volume. Press the speakerphone key to
enable and disable the speakerphone option.
OK
24
Understanding the Display Screen
Understanding the Display Screen
The top line of your phone’s
display contains icons that
indicate network status, ba ttery
power, signal strength,
connection type, and more. The
following list contains icons that
may appear in your display.
Display screen icons
Signal strength—Always appears when your phone is
on and indicates the current signal strength. More lines
indicate higher signal strength.
Service indicator—Indicates a call in progress. When
dialing a number, this icon flashes until the call connects.
No service indicator—Indicates your phone cannot find
a signal because you’re outside a service area. You
cannot make or receive calls. Wait for a signal or move
into an open area to try and find a signal. The no service
indicator always appears when you turn on your phone
and disappears once service is located.
Analog mode indicator — Indicates your phone is
operating in an analog service area or that digital service
has been interrupted. Also indicates that some network
features are not available. Also, you may need to recharge
your phone’s battery more often while in an analog
service area.
Section 2
Section 2: Understanding Your Phone25
Section 2
D
Roam — Extended roaming indicator. Roaming occurs
when you use your phone outside your home area. While
roaming, a wireless provider other than yours handles
your call, so the service rate for the call may be higher
than for calls made within your home area. Please refer to
information from your Wireless Provider on roaming rates.
New Message — Indicates that you’ve received a new
text, page, or web alert message. You’re also notified by a
visual and audible alert.
Voice Mail — Indicates that you’ve received a new voice
mail.
1X Protocol — Indicates your phone is using the 1X
protocol.
IS95-2G Protocol — Indicates your phone is using the
D
IS95-2G protocol. This protocol is not capable of high
speed data.
Battery strength — Indicates the battery charge level.
The more black bars, the greater the charge. When the
battery becomes very low, a flashing empty battery icon
displays and the phone sounds an audible alert, which
indicates your phone is about to shut down.
Alarm clock — The alarm clock is set.
GPS (911 only) — This icon represents Global P ositioning
Service (GPS) for 911.
GPS — Indicates GPS is on for location.
Vibrate plus Ring — Your phone is in vibrate plus ring
mode. When you receive a call, the phone vibrates and
rings.
26
Understanding the Display Screen
Ring — Your phone is in ring mode. When you receive a
call, the phone rings.
Ringer Silent — The ringer has been set to Silent using
the volume key on the side of the phone.
Silent mode — Indicates your phone is in silent mode.
Ringer is silenced for all alerts, incoming calls, and
incoming messages. The phone alerts you of incoming
calls, alerts, and messages by vibration and a flashing
Service LED.
Vibrate mode — Your phone is in vibrate mode. When
you receive a call, the phone vibrates instead of ringing.
Dialogue Boxes
Dialogue boxes prompt for action, inform you of status,
or warn of situations such as low memory. Dialogue
boxes and their definitions are outlined below.
• Choice
䢇 Example: “Save to draft?”
• Reconfirm
䢇 Example: “Erase all inbox msgs?”
• Performing
䢇 Example: “Sending...” “Connecting...”
• Completed
䢇 Example: “Message Saved”
• Information
䢇 Example: “New Message”
• Error
䢇 Example: “Syst em Err or!”
Section 2: Understanding Your Phone27
Section 2
• Warning
䢇 Example: “Battery Low,” “Memory Full!”
Backlights
Backlights illuminate the internal and external displays
and the keypad. When you press any key or open the
phone, the backlights come on. They go off when no
keys are pressed within a period of time set in the
Backlight menu.
Note: During a phone call, the display backlights dim and turn off after one
minute to conserve battery power, regardless of the Backlight setting.
See “Backlight” on page 156 for more information.
External Display
Your phone has an external display on the outside of
the folder. When you close the phone, the external
display shows a digital clock.
Icons that appear in the external display indicate the
following:
Section 2
• Incoming calls and messages
• Alarms and alerts
• Battery charge level
• Signal strength
• Service protocol 1x
• Digital roaming service
• Ringer/sound mode
28
Your Phone’s Modes
Your Phone’s Modes
Call Answer Mode
You can select how you wish to answer a call.
1. In standby mode, press the MENU (left) soft key ( ),
then press (for Settings), (for Call Options),
and for Call Answer. The following call answer
options appear in the display:
䢇 Send Key — Only pressi ng answers a call.
䢇 Folder Open — Opening the phone’ s folder o r pressing
answers a call.
䢇 Any Key — Pressing any key except the key or key
answers a call.
2. Use the navigation keys to highlight an option.
3. Press the key to select the method for answering
calls.
OK
Input mode
Input mode determines how you enter text, numbers
and symbols. While at any text entry screen, press the
Option (left) soft key ( ), then choose the input mode
from the pop-up menu using the navigation keys.
Optional input modes are T9 Word, Alpha, Symbol, Number, and Quick Text. (See “Section 5: Entering
Text” on page 67 for more information.)
Tip: You can also cycle between T9 Word, Alpha, and Number by
repeatedly pressing and holding .
Section 2: Understanding Your Phone29
Section 2
Lock Mode
When the phone is in Lock Mode, restrictions are
placed on phone use. You can receive calls and
messages, but cannot place outgoing calls (except for
emergency numbers) until you unlock the phone.
Lock Mode also restricts access to menus and the
volume key. Unlock your phone by entering the lock
code when prompted. (See “Lock Phone” on page 172
for more information.)
Standby Mode
Standby mode is the state of the phone once it has
found service and is idle. The phone goes into standby
mode:
• After you power the phone on.
• When you press after a call or from within a menu.
In standby mode, you will see the time, day, and date as
well as all phone status icons.
1. While in standby mode, enter a phone number, and press
Section 2
Receive Messages in Standby Mode
You can receive messages in standby mode. An alert
tone sounds and a notification message appears in the
display when a new message arrives.
to place a call.
2. Press to return to standby mode.
• Press the View (right) soft key ( ) to view now.
• Press the Ignore (left) soft key ( ) to view later.
30
Loading...
+ 190 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.