Samsung SCD-3083 User Manual

Download

Super High Resolution WDR

Dome Camera

User Manual

SCD-3083

␃ 㢜

■

Super High Resolution WDR Dome Camera

User Manual

Copy

right



de mar k

Tra

The name of t his product is the re gistered tradem ark of Samsung Techwin C o., Ltd. Other tr ademarks mentio ned in this manual are t he registered tra demark of their res pective company.

Restriction

msung Techwin C o., Ltd shall reser ve the copyright of t his document. Und er no circumstanc es, this document

Sa shall be rep roduced, distr ibuted or changed, p artially or who lly, without formal a uthorization o f Samsung Techwin.

aimer

Discl

Samsung Tech win makes the best to v erify the integr ity and correc tness of the conte nts in this documen t, but no formal gu arantee shall be pr ovided. Use of this d ocument and the sub sequent results s hall be entirely on the user’s ow n responsibilit y. Samsung Techwin rese rves the right to ch ange the content s of this document without p rior notice.

Warra nty

If the pro duct does not oper ate properly in no rmal conditions , please let us know. S amsung Techwin will reso lve the probl em for free of charge. T he warranty pe riod is 3 years. How ever, the followings are e xcluded:

•

If the sys tem behaves abnorm ally because you ru n a program irrelev ant to the system ope ration.

•

Deterio rated perform ance or natural wor n-out in proces s of time

Design and specifications are subject to change without prior notice.



he registe red logo of Samsung Tec hwin Co., Ltd.

s t



Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we’ll introduce our model description.

■ SCD-3083 SERIES

 • NTSC MODEL • PAL MODEL SCD-3083N

  SCD-3083P

■ MODEL DESCRIPTION

• SCD-3083X

 

_



SIGNALSYSTEMSIGNALSYSTEM

 •SIGNAL SYSTEM   N→NTSC MODEL   P→PAL MODEL

ᔔ

Safety information

CAUTION

ISK OF ELECTRIC SHOCK.

DO NOT OPEN

REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

CAUTION:

WARNING

•

o prevent damage which may result in ﬁre or electric shock hazard, do not expose this

appliance to rain or moisture.

To prevent injury, this apparatus must be securely attached to the ﬂoor/wall in accordance

• with the installation instructions.

ARNING

sure to use only the standard adapter that is speciﬁed in the speciﬁcation sheet.

Using any other adapter could cause ﬁre, electrical shock, or damage to the product.

Incorrectly connecting the power supply or replacing battery may cause explosion, ﬁre,

electric shock, or damage to the product.

Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause

abnormal heat generation or ﬁre.

Securely plug the power cord into the power receptacle. insecure connection may cause

ﬁre.

When installing the camera, fasten it securely and ﬁrmly. The fall of camera may cause

personal injury.

TO COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Thi

s symbol indicates that dangerous voltage consisting a risk of electric

shock is present within this unit.

s exclamation point symbol is intended to alert the user to the

Th presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

4_ Safety information

not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers ﬁlled with water on top of the camera. doing so may cause personal injury due to ﬁre, electric shock, or falling objects.

Do not install the unit in humid, dusty, or sooty locations. doing so may cause ﬁ

electric shock.

If any unusual smells or smoke come from the unit, stop using the product. in such case,

re or

immediately disconnect the power source and contact the service center. continued use in such a condition may cause ﬁre or electric shock.

If this product fails to operate normally, contact the nearest service center. never disassemble or modify this product in any way. (samsung is not liable for problems caused by unauthorized modiﬁcations or attempted repair.)

10.

When cleaning, do not spray water directly onto parts of the product. doing so may cause ﬁre or electric shock.

CAUTION

not drop objects on the product or apply strong shock to it. Keep away from a location

Do subject to excessive vibrationor magnetic interference.

Do not install in a location subject to high temperature (over 55°C), low temperature (below

-10°C), or high humidity. Doing so may cause ﬁre or electric shock.

If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall it.

Remove the power plug from the outlet when then there is a lightning. Neglecting to do so may cause ﬁre or damage to the product.

Keep out of direct sunlight and heat radiation sources. It may cause ﬁre.

Install it in a place with good ventilation.

Avoid aiming the camera directly towards extremely bright objects such as sun, as this may damage the CCD image sensor.

Apparatus shall not be exposed to dripping or splashing and no objects ﬁlled with liquids, such as vases, shall be placed on the apparatus.

The Mains plug is used as a disconnect device and shall stay readily operable at any time.

10.

Do not expose the camera to radioactivity. Radioactivity exposure may damage the CCD.

●

SAFETY INFORMATION

English_5

Safety information

FCC STA

TEMENT

is device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions :

This device may not cause harmful interference, and

1) This device must accept any interference received including interference that may cause

2) undesired operation.

CAUTION

is equipment has been tested and found to comply with the limits for a Class A digital

Th device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Compliance Notice

This Class A digital apparatus meets all requirements of the Canadian Interference.-Causing Equipment Regulations of ICES-003.

Correct Disposal of This Product

(Applicable in the European Union and other European countries with separate collection systems)

This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

Correct disposal of batteries in this product

(Applicable in the European Union and other European countries with separate battery return systems.)

This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment.

To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.

6_ Safety information

(Waste Electrical & Electronic Equipment)

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions. Do not install near any heat sources such as radiators, heat registers, or other apparatus

(including ampliﬁ ers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug

has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not ﬁ t into your outlet, consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs,

10.

convenience receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories speciﬁ ed by the manufacturer.

11.

Use only with cart, stand, tripod, bracket, or table speciﬁ ed by the

12.

manufacturer, or sold with the apparatus.

Unplug this apparatus when a card is used. Use caution when moving the

13.

cart/ apparatus combination to avoid injury from tip-over.

Refer all servicing to qualiﬁ ed service personnel. Servicing is required when the apparatus

14.

has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

●

SAFETY INFORMATION

Apparatus shall not be exposed to dripping or splashing and no objects ﬁ lled with liquids, such as vases, shall be placed on the apparatus

This product is intended to be supplied by a Listed Power Supply Unit marked "Class 2" and

15.

rated from 24Vac, 50 or 60 Hz / 12Vdc, min. 0.35A

Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products.The Eco mark represents Samsung Techwin’s will to create environment-friendly products, and indicates that the product satisfies the EU RoHS Directive.

English_7

Contents

INTRODUCTION

INsTAllATION

TROUBLESHOOTING

SPECIFICATIONS

CONNECTION

SETUP

Features

What’s included

Component names and Functions

Installation

Adjust the monitoring direction

of the camera

Connecting to Monitor

Connecting to Power

15 16

Using coaxial communications

Menu Conﬁ

Menu Setup

Troubleshooting

Speciﬁ

3

gration

cations

Dimension

8_ Contents

ᄔ

⮈

Introduction

FEATURES

High Resolution

By adopting a diagonal 6mm (1/3”) 520,000 pixel (NTSC), 610,000 pixel (PAL)

SONY CCD, the camera pr

max 700 TV lines(665TVL±5%) for color ER mode and 700 TV lines for BW.

Excellent Sensitivity

The built-in high sensitivity COLOR CCD produces a clear image.

- Color : 0.1 Lux (50IRE, @F1.2), 0.0002LUX (SENS-UP, x512)

- B/W : 0.01 Lux (50IRE, @F1.2), 0.00002 LUX (SENS-UP, x512)



Samsung Super Noise Reduction) Function

(

6615

The high-performance SV-V DSP chip ef and afterimage to provide clear images even in dark environments.

Day & Night

This camera has a function that automatically selects the mode that is appropriate

for daytime or night-time conditions.

conditions to provide to enhance the definition of the image.

Intelligence Without assistance from an external sensor, this camera independently detects and traces objects while examining stillness and movement to activate the alarm.

SSDR (Samsung Super Dynamic Range)

For images with high contrast between bright and dark areas fr

such as backlighting, this camera selectively illuminates darker areas while

conditions

retaining the

Miscellaneous Functions

HLC (High Light Compensation), SENS-UP, REVERSE, D-ZOOM, SHARPNESS and PRIVACY functions are provided.

Communication

Coaxial communication methods are supported.

- Protocol : Pelco Coaxitron

Osd

The camera control is convenient by using 17 different foreign language O.S.D.

- NTSC : English, Japanese, Spanish, French, Portuguese, Korean

- PAL :

same light level for brighter areas to even out the overall brightness.

English, French, German, Spanish, Italian, Chinese, Russian, Polish, Czech, Romanian, Serbian, Swedish, Danish, Turkish, Portuguese

oduces clear picture quality with a horizontal resolution

fectively removes low-light gain noise

The COLOR mode operates in daytime

optimum colors, and B/W mode operates in night-time conditions

om difficult lighting

English_9

●

INTRODUCTION

Introduction



WDR

By adopting a proprietary SV-V DSP chip, the camera delivers clear, high quality pictures even when the scene is backlight, by increasing exposure in dark areas while decreasing it in bright areas; a corrected image with clear details results.



VPS(Virtual Progressive Scan)

Adopting Samsung's unique development, the VPS(Virtual Progressive Scan) enhances the sharpness of moving subject's outline. The VPS enables elective output in progressive mode using the existing interlaced input and effectively enhances the sharpness of captured pictures from video and still images. The function effectively removes blurred outline problems resulting in excellent road monitoring and improved license plate recognition.



DIs (Digital Image stabilizer)

The DIS function compensates for any camera movement, to produce more stable pictures.

WHAT’S INCLUDED

Check if the following items are included in the product package.

Super High Resolution WDR Dome Camera

Quick Set-up Guide

SCD-3083

Camera

Video Output Cable

10_ Introduction

Quick Manual

Tapping Screw 3EA

ಲ

y y

COMPONENT NAMES AND FUNCTIONS

RED (MD_OUT WHITE (EXT_DN) BLACK (GND)

➑

➏

➐

➌

⓬

❶

⓫ ❿ ➒

Dome Cover Shield Case

Pan Base

: control panning angle of camera

Function Setup Switch

Video Output Terminal to Monitor

Rotate Base

: control rotating angle of camera.

Power Input Connector

Ground Terminal D & N Input Terminal :

You can switch to Day & Night Mode by connecting

an external signal to this terminal.

MD Output Terminal:

Motion detection signals are output through this terminal.

Video Output Jack

Be sure to connect the Day & Night input terminal to GND when using an external input.



❶

➌

➏ ➐

➑ ➒ ❿

⓫ ⓬

and right amend or conﬁ rm changes.

●

INTRODUCTION

2.8 Vari-focal Lens Module

3 ~ mm (F1.2)

8.5

: Display the OSD menu and move the cursor up, down, left,

When menu is off,

for adjusting focus. move thisswitch up(TELE) or down(WIDE)

for adjusting zoom.

automatically.

move this switch left(NEAR) or right(FAR)

Short to press this button to fit the focus

English_11

Installation

BEFORE INSTALLATION

Before installing your camera, you have to read the following cautions ：

You have to check whether the location (ceiling or wall) can bear five times the weight of your camera.

•

Don’t let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise it may cause a breakdown or fire.

•

Before installing your camera, you have to adjust the lens focus, zoom, and switch settings.

•

When installing your camera, don’t allow any person to approach the installation site. If you have any valuable things under the place, move them away.

INSTALLATION

Separate the dome cover by turning anti-clockwise and separate the shield case by pulling from

the camera body.

Main Body (Camera)

Latch

Unlocking direction (Anti-clockwise)

Shield Case

Locking direction (Clockwise)

Dome cover

12_ Installation

Hold the ceiling bracket (located where the arrow points to) and separate it from the main body of

the camera by rotating it anti-clockwise.

Place the separated ceiling bracket so that the “Front” side faces the area to be monitored

and install it with the M4 tapping screws.

PanBase

fixation

Ceilingbracket

tapping

screw

To combine the main body with the ceiling bracket, make sure that the pan base fixation screw

face the opposite side of the “Front” side of the ceiling bracket and rotate it clockwise.

Adjust the camera lens to face the area to be monitored and fix the main body and

the dome cover by aligning the grooves and rotating the body clockwise.

tapping

screw

Ifyouwanttoinstallthecamerawiththeceiling

＊　

bracketcombined,fixitusingtwotapping atthesideofthemainbody

screw

screws



●

INSTALLATION

English_13

Installation

Adjusting the monitoring direction for the camera

Adjusting the monitoring direction

You can adjust the camera direction only when the camera is fixed on the ceiling. Where, rotating the camera unit to the left or right is called Pan, adjusting the tilt is called Tilt, and turning the lens on its axis is called Rotation.

- The effective range of pan is a total of 352 degrees.

- The effective range of rotation is a total of 348 degrees.

- The effective range of tilt is a total of 73 degrees.



Methods of adjustment

After installing the camera, adjust the panning angle in consideration of the monitoring direction.

Set the horizontal angle so that the image is not reversed.

Adjust the tilt angle so that the camera faces toward the monitoring object.

Pan

Tilt

Lens rotation

The image can be covered up by the camera case depending on the angle.

Do not forcefully turn the focus/zoom lens after the dome case is disassembled. Otherwise, it may cause an incorrect focus due to a motor failure.

14_ Installation

⻸

ಲ

㎫

ಲ

㎫

※

Connection

CONNECTING TO MONITOR

Connect the Video OUT port on the rear panel of the camera to a monitor.

Camera

As the connecting method varies with the instruments, refer to the manual supplied



with the instrument. Only connect the cable when the power is turned off.



Monitor

CONNECTING TO POWER

Since power specifications differ depending on the model, make sure to check your model name

and specifications before connecting power.

You can connect power as shown in the following figure.

----

Power Input Terminal

When the resistance value of copper wire is at [20°C(68°F)]











Copper wire size (AWG)

Resistance ( Ω /m)

Voltage Drop (V/m)



As shown in the table above, voltage decreases as the wire gets longer. Therefore use of an excessively long adaptor output line for connection to the camera may affect the performance of the camera.

Standard voltage for camera operation

There may be some deviation in voltage drop depending on the type of wire and the manufacturer.

PP

PP

PP

PP            

：

DC 12V ±10%, AC 24V ±10%

PP



PP

English_15

●

CONNECTION

Connection

Be sur

e to connect po



Note that AC / DC adaptor is not supplied with camera.



Ground should be connected to the GND terminal.



wer only after all the installation is complete.

Using coaxial communications

Coaxial Communications System

•

• OSD Control method

If you set the sensitivity level of the sub menu item (of COAX) to “Low”, you have to

•

press the MENU/ENTER (OSD KEY) button twice in a row to access the OSD menu. (To prevent an error by noise from the DVR)

CAMERA DVR CONTROLLER

SET MENU/ENTER OSD KEY

UP UP KEY JOYSTICK UP

DOWN DOWN KEY JOYSTICK DOWN

LEFT LEFT KEY JOYSTICK LEFT

RIGHT RIGHT KEY JOYSTICK RIGHT

DVR

ALARM HDD NETWORK BACKUP REC

REC

1234

ZOOM

FREEZE

BACKUP

5678

112

9101

TELE

PRESET

WIDE VIEW

MODE

AUDIO

ALRAM

DVD RECORDER

14 15 16

OPEN/CLOSE

USB

RETURN

: BNC

•

16_ Connection

ಲ

y y

- Video Cable The camera's video output port is connected to the monitor with a BNC coaxial cable, shown below : If the distance between the camera and the monitor exceeds the recommended maximum, please use an auxiliary video amp.

Distance

It is recommended that pure copper coax cable is used and not copper coated



steel, as this will cause issues with the communication o

To ensure picture quality, only single-channel video output connector can be



used while camera connected to other video equipments.

Recommended Cable Specification

300m 3C2V(RG-59/U) 450m 5C2V(RG-6/U) 600m 7C2V(RG-11/U)

ver the coaxial cable.

●

CONNECTION

English_17

Setup

MENU CONFIGRATION

MAIN SETUP

●

LENS

EXPOSURE

SSDR

WHITE BAL

BACKLIGHT

SSNR3

DAY/NIGHT

SPECIAL

EXIT

meNU seTUp

Use the Function Setup switch within the camera.

●

BRIGHTNESS

●

SENS-UP

●

OFF

●

ATW

●

MANUAL

●

OFF

●

WDR

●

AUTO

●

B/W

●

IMAGE ADJ

●

INTELLIGENCE

●

PROFILE

●

SAVE

VIDEO

▶

●

SHUTTER

●

RETURN

●

OUTDOOR

●

AWC→SET

●

USER BLC

●

OFF

●

EXTERN

●

CAM TITLE

●

PRIVACY

●

COAX

●

NOT SAVE

Function Setup switch

●

AGC

●

INDOOR

●

HLC

●

COLOR

●

SYNC

●

DIS

●

RETURN

●

RESET

Press the Function Setup switch.

Main setup menu is displayed on the monitor screen.

18_ Setup

㔤

㖳

䯝

Select the function using the Function Setup switch.

1.LENS DC

2.EXPOSURE

SSDR

WHITE BAL ATW BACKLIGHT OFF

5. SSNR3 ON

6. DAY/NIGHT AUTO

OFF

Change the status using the Function Setup switch.

8.SPECIAL

9.EXIT SAVE

MAIN SETUP

Select a desired function using the Function Setup switch.

Place the cursor over a desired item.

Set up a selected item by using the Function Setup switch.

To ﬁ

nish the setting, select ‘EXIT’ and press the Function Setup switch.

An item with the icon also has sub menus. To select a sub menu, select an item with the icon



and press the Function Setup switch.



An item with the - - - icon is unavailable due to function settings.

LENS

Using this function, you can control the screen brightness.

1.2.When the SETUP menu screen is displayed, select ‘LENS’ by using the Function

Setup switch so that the arrow indicates ‘LENS’.

DC : You can adjust the minimum shutter and

maximum value of ESC shutter mode.

The Lens mode has sub menu items as listed below.

Brightness : Adjusts the video brightness.

FOCUS ADJ :

correctly, you must activate the Focus Settings mode under each lens menu. Activate the Focus

Settings mode, adjust the lens focus, and then deactivate the settings mode.

To adjust the DC lens focus

BRIGHTNESS

１．

▶

２．

FOCUS ADJ

３．

RETURN

SIMPLE FOCUS

１．

▶

２．

AFTER D/N

３．

RETURN

DC LENS

IIIIIIIII*IIIIIIII

FOCUS ADJ

OFF

●

SETUP

English_19

Setup

SIMPLE FOCUS

AFTER D/N :

RETURN :

: Select this

After D or N is switched, select whether to use the focus readjustment function.

Select this to save the changes in the FOCUS ADJ menu and return to the DC LENS menu.

Select this to save the changes in the DC LENS menu and return to the SETUP menu.

to fit the focus automatically.

EXPOSURE

When the SETUP menu screen is displayed, select EXPOSURE by using the Function Setup switch so that the arrow indicates

Select a desired mode using the Function

Setup switch.

BRIGHTNESS : Adjusts the video brightness.

  SHUTTER :

You can select the shutter.

ESC : Select this to control the shutter

speed automatically. If ESC is selected, the shutter speed is automatically controlled depending on the ambient illumination of the subject.Shutter speed will change between MIN and MAX by setting.



MIN : 1/50~1/60000



MAX : 1/00~1/20000

MANUAL : You can control shutter speed manually. (NTSC MODEL - 1/60sec~1/120,000sec, PAL MODEL - 1/50sec~1/120,000sec)

A.FLK : Select this when you experience picture flicker, this happen when there is

a clash with the installed lighting frequency.

--- :

Shutter speed is fixed.



When the SHUTTER is set to ESC after selecting the Internal Synchronization Type, the picture may become unstable if the camera faces a bright ﬂuorescent light. Therefore, take care when choosing

'EXPOSURE'.

䯝 1.

BRIGHTNESS

2.SHUTTER ESC

3.AGC HIGH

4.SENS-UP OFF

5.RETURN

EXPOSURE SETUP

IIIIIÂIIIIIIIIIIIIIIII

the installation position.



When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.



Set the shutter mode to --- if color rolling occurs.

20_ Setup

AGC(AUTO GAIN CONTROL) : The higher the gain level, the brighter the screen - but

HIGH : Allows automatic gain control from 5.3dB to 42dB.

OFF : Deactivates the AGC function.

LOW : Allows automatic gain control from 5.3dB to 32dB.

SENS-UP : When it is night or dark, the camera automatically detects the light level and

maintains a clear picture if this mode is activated.

OFF : Deactivates the SENS-UP function.

AUTO : Activates the SENS-UP function.

RETURN : Return to the SETUP menu.

If you press the Function Setup switch in ‘AUTO’ mode, You can adjust brightness by adjusting



the SENS-UP level. (x2 ~ x512) Note that the higher the SENS-UP level, the brighter the screen, but the more likely it is that an



after-image will appear. It is normal for Noise, Spots and Whitish symptoms to appear in SENS-UP mode when the



D-ZOOM level is increased.

SSDR (Samsung Super Dynamic Range) :

SSDR illuminates darker areas of an image while retaining the same light level for brighter areas to even out the overall brightness of images with high contrast between bright and dark areas.

When the SETUP menu screen is displayed,

select SSDR by using the Function Setup switch so that the arrow indicates

Deactivates the SSDR function.

OFF :

Activates the SSDR function.

ON :

Use the Function Setup button to change the SSDR level in the sub menu according to the contrast between bright and dark areas.

the greater the noise.

'SSDR'.

䯝 1. LEVEL

SSDR SETUP

IIIIIIIIIIIÂIIIIIIIIII

Press SET to Return

●

SETUP

SSDR ON

SSDR OFF

English_21

Setup

WHITE BAL (WHITE BALANCE)

Use the White Balance function to adjust the screen color.

When the SETUP menu screen is displayed, select ‘White Bal’ by using the Function

Setup

switch so that the arrow indicates ‘White Bal’.

Select a desired mode using the Function Setup switch.

※

Select one of the following 5 modes, as appropriate for your purpose.

ATW : Select this when the color temperature is between 2,400˚K and 10,500˚K.

OUTDOOR :

INDOOR :

MANUAL

AWC→SET



Select this when the color temperature is between 1,700˚K and 11,000˚K. (sodium light inclusion) Select this When the color temperature of environment surrounding the subject is out of the control range (e.g. clear sky, or sunset)

Select this when the color temperature is between 4,500˚K and 8,500˚K.

Select this to ﬁ

Balance manually. Set White Balance ﬁ rst by using the ATW or AWC mode. After that switch to MANUAL mode, ﬁ ne-tune the White Balance and then press the Function Setup switch.

mode.

en the color temperature of the environment surrounding the subject is out of

the control range (e.g. clear sky or sunset).

When the ambient illumination of the subject is dim.

the camera is directed towards a ﬂuorescent light or is installed in a

➌

If place where illumination changes dramatically, the White Balance operation may become unstable.

ne-tune White

To ﬁ nd the optimal luminance level for the current environment, point the camera towards a sheet of white paper and press the Function Setup switch. If the environment changes, readjust it.

WB MANUAL

IIIIII

䯝 RED GAIN BLUE GAIN

IIIIIIIIIIIIIIIII*IIIIIIIIII

Press SET to Return

White Balance may not work properly under the following conditions.In this case select the AWC

IIIIII IIIIIIIIIIIIII

117

193

22_ Setup

BACKLIGHT

The camea is designed so that it delivers a distinctive subject and background at the same time, even when the subject is in backlight, by adopting a function of the proprietary SV-V DSP chip.

When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using

the Function Setup button. so that the arrow indicates ‘BACKLIGHT’.

Select a desired mode using the Function Setup button depending on the

camera purpose.

OFF :

Not being used

USER BLC :

area on a picture and view that area more clearly.

HLC (High Light Compensation) :

This function masks the strong light to minimize white out due to over exposure and preserve much of the on-screen details when the camera aims a strong light source.

WDR : When there are both bright and dark areas at the same time, this mode makes

Enables a user to select a desired

LEVEL : Adjusts the brightness level of a

monitoring area. TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced.

LEVEL : Adjusts the brightness level of a monitoring area. LIMIT : Enable to change the operating condition. MASK COLOR/TONE : Change the color / brightness of the masking area. (Black, Red, Blue, Cyan, Magenta) TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced.

both areas distinctive.

LIMIT : Adjust the WDR Sensitivity by selecting LOW, MIDDLE, or HIGH. LEVEL : Adjust the WDR Brightness by controlling the bar from 1 to 10. MODE : Indoor and outdoor backlight conditions are appropriately selected. ANTI ROLLING : Rolling caused around a fluorescent lamp is improved.

BLC SETUP

䯝 1. LEVEL

2. TOP

3. BOTTOM

4. LEFT

5. RIGHT

6. RETURN

HLC SETUP

䯝 1. LEVEL

2. LIMIT MASK COLOR BLACK

4. MASK TONE

5. TOP

6. BOTTOM

7. LEFT

8. RIGHT

9. RETURN

IIIÂIIIIIIIIIIIIIIIIII

IIIIIIIIIIIIIIIIÂIIIII

IIIÂIIIIIIIIIIIIIIIIII

IIIIIIIIIIIIIIIIÂIIIII

NIGHT ONLY

IIIIIIIIIIIIIIIIIIIII

IÂIIIIIIIIIIIIIIIIIIII

IIIIIIIIIIIIIIIIIIÂIII

IÂIIIIIIIIIIIIIIIIIIII

IIIIIIIIIIIIIIIIIIIÂII

MIDDLE

100

140

MIDDLE

120

210

WDR SETUP

䯝 1. LIMIT MIDDLE

2. LEVEL

IIIIIIIIIÂIIIIIIIIIIII

3. MODE INDOOR

4. ANTI ROLLING OFF

5. RETURN

English_23

●

SETUP

Setup



 

WDR ON WDR OFF

Because there can be a difference in the effectiveness of HLC according to the amount of light area in the screen, optimize the installation angle for the best HLC performance.

In a dark environment, the HLC is only activated when a high light that is larger than a certain area is present.

The HLC is not activated in day light or when bright light is not present at night. (In NIGHT ONLY mode).

Since the performance of the WDR function may be affected by the area of the bright part of the screen, optimize the installation angle for the best WDR performance.

If you increase LIMIT, the screen display may be distorted. If you use the VPS (Virtual Progressive Scan) function, the CCD reads differently so you can not use

WDR simultaneously. If you set VPS to ON, WDR will be automatically set to FIXED Mode.

6615

This function reduces the backgr

When the SETUP menu screen is displayed, Setup switch so that the

Select a desired mode using the Function Setup

switch.

Off : Deactivates SSNR3. Noise is not reduced.



ON : Activates SSNR3 so that noise is reduced.



3. Set the SSNR3 mode to 'ON' and press the Function Setup switch.

Then you can adjust the noise reduction level.

You cannot set the SSNR3 to 'ON' or 'OFF' when the AGC mode of the EXPOSURE



24_ Setup

menu is 'OFF'.

When adjusting the noise reduction level of the SSNR3 mode, r



the level set, the mor

ound noise in a low luminance environment.

arrow indicates 'SSNR3'.

e the noise level will be reduced but that after image may also occur.

select 'SSNR3' by using the Function

▶ LEVEL

SSNR3

IIIIIIIIIIIIIIIIIIIII

Press SET to Return

emember that the higher

DAY/ NIGHT

You can display pictures in color or black and white.

1. When the SETUP menu scr

and Down buttons so that the arrow indicates ‘DAY/NIGHT’.

2. Select a desired mode using the Left and Right buttons accor you want.



AUTO

: The mode is switched to ’Color‘ in a normal environment, but switches to

‘B/W’ mode when ambient illumination is low. To set up the switching time

or AUTO mode, press the Function Setup switch. You can turn on or off

f the burst signal on B/W mode.

BURST MODE :

burst signal on B/W mode.

TION :

DURA

level at which the camera switches from day to night mode.

DWELL TIME :

time about changing the day/night mode. →3s, 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s

EXTERN : Ground to the grounding terminal to allow automatic switching between

COLOR and B/W.



COlOR : The picture is always displayed in color.



b/W : The picture is always displayed in black and white. burst mode on B/W mode.

When AGC in the EXPOSURE menu



When using an external input, Connect the D & N Input Port to the Ground Terminal.

een is displayed, select ‘DAY/NIGHT’ by using the Up

ou can turn on or off the

ou can select the brightness

You can select the duration

is set to OFF, AUTO mode is not available to select.

▶1.BURST MODE ON

2.COLORB/W DURATION FAST DWELL TIME 5 SEC

3.B/WCOLOR DURATION FAST DWELL TIME 10 SEC

4.RETURN

ding to the picture display

UTO SETUP

You can turn on or off the

●

SETUP

English_25

Setup

SPECIAL

1. When the SETUP menu screen is displayed, select ‘SPECIAL

switch

so that the arrow indicates ‘SPECIAL’.

2. Select a desir



ed mode using the Function Setup

switch.

ImAGe ADJ :

1) When the SPECIAL menu screen is

displayed, select ‘IMAGE ADJ’ by using the Function Setup switch so that the

arrow indicates ’IMAGE ADJ‘. Select a desired mode using the Function Setup switch.

: Please change the settings

monitor

LCD :



CRT :



USER : Please use this menu item when

of video appropriate to

value your monitor.

Please select this menu item when

using an LCD monitor. change the gamma, PED color gain in the sub

Please select this menu item when using a CRT monitor. You can change the PED level, color gain in the sub menus.

dard ones. You can change the in the sub menus.

You can

menus.

level and

IIÂIIIIIIIIIIIIIIIIIII

IIIIIIIIIIÂIIIIIIIIIII

Setup

’ by using the Function

#䯝 1.IMAGE ADJ

2.CAM TITLE OFF

3.SYNC INT

4.INTELLIGENCE OFF

5.PRIVACY OFF

6.DIS OFF

8.COAX

9.RETURN

▶ 1. MONITOR LCD

2.VPS OFF

3.REVERSE OFF

4.PIP OFF

5.D-ZOOM OFF

6.FONT COLOR BLUE

7.SHARPNESS ON

8.LANGUAGE ENGLISH

9.RETURN

䯝 GAMMA 0.55

RESET

using a monitor other than stan-

gamma, PED level and color gain

SPECIAL

7.PROFILE BASIC

IMAGE SETUP

LCD MONITOR

PED LEVEL COLOR GAIN

Press SET to Return

26_ Setup

VPS(Virtual Progressive Scan) :

This is an advanced technology that reproduces a sharp progressive image. This is appropriate to high quality recording and file transfer via the Internet.

OFF : Selects 2:1 Interlaced Scan as the Imaging Method.

• ON : Selects Progressive Scan as the Imaging Method.

•

REVERSE : You can reverse the picture.

OFF : You don’t reverse the picture.

• H-REV : You can flip the picture horizontally on the screen.

• V-REV : You can flip the picture vertically on the screen.

• HV-REV : You can flip the picture horizontally and vertically on the screen.

•

PIP(Picture in Picture) : Displays a full-size

image along with the thumbnail to provide more detailed information. The position of the thumbnail is adjustable.

D-ZOOM : You can use a digital zoom

of x1 ~ x16.

FONT COLOR : You can change the OSD

font color. (White, Yellow, Green, Red, Blue)

SHARPNESS : As you increase this value,

the picture outline becomes stronger and clearer. Adjust this value appropriately depending on the sharpness of the picture.



OFF: Turn off Sharpness function.



ON : The higher the level is,the sharper and

clearer the outline of the image becomes.



ER (Enhanced Resolution) : Choosing this mode can increase the sharpness of the picture

LANGUAGE : You can select the menu language according to your requirements.

RETURN : Return to the SPECIAL menu.



When the V-REV or H-REV mode is enabled, the text on the screen does not ﬂ ip.



If you increase the SHARPNESS level too high, the picture may become distorted or noise may appear.

under the colour mode.

䯝 1. X POS

2. Y POS

3. RETURN

䯝 Level

PIP SETUP

IIIIIIIIIIIIIIIIIIIIIIIIIIÂIII

SHARPNESS

IIIIIIIIIIIIIIIÂIIIIIIIIIIIIII

Press SET to Return

●

SETUP

English_27

Setup

CAM TITLE :

appear on the monitor.

SYNC : In areas where the supply is at

28_ Setup

If you enter a title, the title will

If the SPECIAL menu screen is displayed, use the Function Setup button so that the arrow indicates ‘CAM TITLE’.

Set it to ‘ON’ by using the Function Setup button.

Press the set button.

Use the Function Setup button to move

to a desired letter and select the letter by pressing the set button. Repeat this

to enter multiple letters. You can enter up to 15 letters. Enter a title, move the cursor to ‘POS’ and press

the set button. The entered title appears on the screen. Select the position to display the title on the screen by using the Function Setup button and press the set button. When the position is determined, select ‘END’ and press the set button to return to the SPECIAL menu.

When the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor screen even if you enter one.

 

and Numbers are available in this mode.



If you move the cursor to CLR and press the set button, all the letters are deleted. To edit a letter,

change the cursor to the bottom left arrow and press the set button. Move the cursor over the letter to be edited, move the cursor to the letter to be inserted and then press the set button.

60Hz(NTSC), 50Hz(PAL) frequency, you can synchronize the output phase of multiple cameras using the power synchronization function (Line-Lock) without using a synchronization signal generator.

INT : Internal Synchronization Type L/L : Power Synchronization Type, Line-lock

Press the set button. You can select a desired phase from 0 to 359 when select 'phase'.



When using AC power at 60Hz(NTSC), 50Hz(PAL) frequency, you can use the L/L type synchronization.



When the power is DC 12V, the SYNC menu is ﬁ xed to the ‘INT’ mode.

If the VPS is set to ON, synchronization is ﬁxed to INT.



CAMERA TITLE SETUP

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z a b c d e f g h i j k l m n o p q r s t u v w x y z

- . 0 1 2 3 4 5 6 7 8 9 ← → C L R P O S E N D

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _

FRONT DOOR

SYNC

IIIIIIIIIIIIIIIIIIIIIIIIIIIIII

䯝 PHASE

Press SET to Return

INTELLIGENCE :

Commands the camera to motion-detect and trace an object.

MOTION : Select motion types to detect.

OFF : Not being used.

•

DETECTION : Since the camera

• detects motion without any additional external sensor, you can monitor activity more efficient.

•

TRACKING : Commands the camera to detect and trace a moving object.

FENCE : You can select up to 4 FENCE.

MODE : Determines whether to use the fence selected in the FENCE.

TYPE : Two types, line and area, of fences are available.

COUNT : Displays how many times a subject passes over the fence on the screen.

FILL : Fill or remove color from the FENCE.

POSITION :Defines the position and detection direction of a line or fenced area.

䯝 1. MOTION OFF

2. DETECT BOX ON

3. ALARM OUT OFF

4. DETECT AREA

5. MASK AREA

6. SENSITIVITY

# # 7. DETECT SIZE

8. RETURN

䯝 1. FENCE FENCE1

2. MODE OFF

3. TYPE LINE

4. COUNT OFF

5. FILL OFF # 6. POSITION

7. RETURN

1) LINE FENCE

SEL POS : Selects a position from POS1,POS2.

X POS / Y POS : Adjust the size and position of the selected line fence.

DIRECTION

DIR1 : Detects objects moving left

to right on the fence line.

DIR2 : Detects objects moving right to left on the fence line.

DIR1/2 : Detects all objects moving crosswise on the fence line.

RETURN : Return to the TRACKING menu.

1. SEL POS

2. X POS

3. Y POS

4. DIRECTION DIR1

5. RETURN

INTELLIGENCE

IIIIIIIIÂIIIIIIII

IIIIIIIIÂIIIIIIIII

TRACKING

LINE FENCE

IIIIIIIIIIIIIIIIIIIII



IIIIIIIIIIIIIIIIIIIIIIIII

3 3

POS1

●

SETUP

English_29

Setup

30_ Setup

2) AREA FENCE SEL POS : Selects a position from

RETURN:

•

FIXED/MOVED : Detects an object that emerges or disappears from the

A detection (FIXED/MOVED) error may occur if :



multiple motions occur continuously in random directions

a fixed object moves in one position continuously

a second object screens the first moving object

DETECT BOX : Outlines an object on the screen in a box when its movement

matches a custom Motion Type. ALARM OUT : Releases a signal from the MD Output Port on the back of the

camera when an object’s movement matches a custom Motion Type. DETECT AREA : Motion Detection and

tracking will only occur within this defined area. (Full Screen is defined as factory default). MASK AREA : Specify a detection

exception area to mask.

number and specify the size and position.

AREA : You can select up to 4 areas.

•

MODE : Determines whether to use

•

TOP / BOTTOM / LEFT / RIGHT :

•

Adjust the size and position of the selected area.

POS1 ~ POS4.

X POS / Y POS : Adjust the size and position of the selected area fence.

DIRECTION

IN : Detects objects entering the

fenced area.

OUT : Detects objects exiting the fenced area

IN/OUT : Detects all objects entering and exiting the fenced area.

RETURN :

Return to the TRACKING menu.

Return to the INTELLIGENCE menu.

screen, or stays onscreen without movement.

䯝 1.TOP

2.BOTTOM

3.LEFT

Select a mask area

the area selected in the AREA.

4.RIGHT

5.RETURN

䯝 1.AREA

2.MODE

3.TOP

4.BOTTOM

5.LEFT

6.RIGHT

7.RETURN

AREA FENCE

1. SEL POS POS1

2. X POS

3. Y POS

4. DIRECTION IN

5. RETURN

DETECT AREA

IIIIIIIIIIIIIIIIIIIII

MASK AREA

IIIIIÂIIIIIIIIIIIIIIII

IIIIIIIIIIIIÂIIIIIIIII

IIIIIIIIIIIIIIIIIIIII

IIIIIIIIIIIIÂIIIIIIIII

IIIIIIIIIIIIIIIIIIIII



IIIIIIIIIIIIIIIIIIIIIIIII

AREA1

OFF

110

RETURN : Select this to save the MASK AREA menu settings and return

•

SENSITIVITY : Set the sensitivity of the motion detection. When you adjust the

lower level, the more sensitive.

DETECT SIZE : Selects an object size to detect on the screen. When you

adjust higher levels, the more larger size.

RETURN : Return to the SPECIAL menu.

PRIVACY :

Mask an area you want to hide on the screen.

When the SPECIAL menu screen is

1) displayed, press the set button so that the arrow indicates ‘PRIVACY’. Set up the mode using the Function

2) Setup button.

AREA : You can select up to 12 PRIVACY areas. MODE : Determines whether to use the

area selected in the AREA. MASK COLOR : Determine area color.

You can select Green, Red, Blue, Black, White, Gray. TRANSPARENCY : Adds or removes transparency from the masking area.

SEL POS/ XPOS/ YPOS : Adjust the size and position of the selected area.

RETURN :

DIS (Digital Image Stabilizer) :



 

to the INTELLIGENCE menu.

PRIVACY AREA SETUP

䯝 1. AREA AREA1

2. MODE OFF

3. MASK COLOR GREEN

4. TRANSPARENCY OFF

5. SEL POS

6. X POS

7. Y POS

8. RETURN

Return to the SPECIAL menu.

This function mitigates any picture movement due to external factors such as wind.

As the DIS function uses the digital zoom, the camera's resolution will decrease. DIS doesn’t operate when background illumination is too low. DIS doesn’t operate when object pattern is monotonic as like sky or white wall.

IIIIIIIIIIIIIIIIIIIII

L_TOP

●

SETUP

10 10

English_31

ড়

⥂

Setup

PROFILE :

Select a desired mode using

the Function

the picture

SHUTTER ESC ESC ESC GAIN HIGH HIGH HIGH HIGH HIGH - WHITE BAL ATW ATW ATW OUTDOOR INDOOR - BACKLIGHT OFF OFF USER BLC OFF OFF - SSNR3 ON ON ON ON ON - DAY/NIGHT AUTO AUTO AUTO AUTO AUTO -

Setup switch according to

display

BASIC : The most common environment

is set to meet.

DAY/NIGHT :

so it optimizes to the day or night

conditions, respectively.

BACKLIGHT : so you can distinguish the object from the background in a severe backlighting scene.

ITS : It will be set automatically so you can easily check the trafﬁc conditions. INDOOR : It will be set automatically to help you take a picture in a regular

USER : Automatically conﬁgures the camera to your custom settings.

Select Custom for Simple Setup mode.

Conﬁgure the menu options to your custom settings.

The settings are automatically saved as Custom mode.

Proﬁle user mode don't initialize when menu resets.

In the PROFILE menu, you can configure the following camera settings at once.

It will be set automatically

indoor lighting condition.

BASIC DAYNIGHT

BACKLIGHT

1.IMAGE ADJ

2.CAM TITLE OFF

3.SYNC INT

4.INTELLIGENCE OFF

5.PRIVACY OFF

6.DIS OFF

#䯝

7.PROFILE BASIC

8.COAX

9.RETURN

ITS INDOOR USER

MANUAL(1/250)

SPECIAL

A.FLK -

32_ Setup

COAX

You can select whether to use COAX

communication.

If you use the COAX communication, you

prevent malfunctions by selecting

sensitivity levels against noise.

RETURN :

Return to the MAIN SETUP menu.

low

䯝

SENSITIVITY

2. RETURN

COAX SENSITIVITY

LOW

EXIT

Select a desired EXIT mode using the Function Setup button depending on the camera purpose.

SAVE : Save the current settings and exit the MAIN SETUP menu.

NOT SAVE : Do not save the current settings and exit the MAIN SETUP menu.

RESET : Resets the camera settings to the factory defaults. Communication,

Language and Monitor settings are not initialized.

●

SETUP

English_33

Troubleshooting

TROUBLESHOOTING

If you have trouble operating your camera, r

you to solve the problem, contact an authorized technician.

PROBLEM

Nothing appears on the screen.

The image on the screen is dim.

The image on the screen is dark.

The camera is not working

properly, and the surface of the camera is hot.

The DAY/NIGHT function does not work.

Color is not correct.

The screen ﬂ ickers continually.

When coaxial communication is not available

efer to the following table. If the guidelines do not enable

▶ Check that the power cord and line connection between the

camera and monitor are ﬁ

▶ Check that you have properly connected VIDEO cable to the

camera VIDEO output jack.

▶ Is the lens stained with dirt? Clean your lens with a soft, clean cloth. ▶

Check the monitor and DVR settings.

▶

If the camera is exposed to very strong light, change the camera position.

▶ Adjust the contrast feature of the monitor or DVR.

If you have an intermediate device, set the 75Ω / Hi-z properly.

▶

▶ Check that you have properly connected the camera to an

appropriate power source.

▶

Check that

AGC of EXPOSURE SETUP menu is ‘OFF’.

▶ Check the setting of WHITE BAL SETUP menu .

▶ Check that the camera is not pointing at the sun.

▶ Make sure that the camera and monitor are installed within

the recommended distance.

▶

Use the video ampliﬁ er equivalent to coaxitron if the recommended installation distance is exceeded.

SOLUTION

xed properly.

34_Troubleshooting

Specifications

SPECIFICATIONS

VIDEO

Imaging Device

Total Pixels

Effective Pixels

Scanning System

Synchronization

Frequency

Horizontal Resolution

Min. Illumination

S / N Ratio

Video Output

Lens Type

Focal Length(Zoom Ratio)

Max. Aperture Ratio

Angular Field of View

Lens Type

Mount Type

Pan / Tilt /Rotate

Pan/Tilt/Rotate Range

OPERATIONAL

On Screen Display

Camera Title

SCD-3083N SCD-3083P

1/3’

’ Super HAD CCD II

1028(H) x 508(V) 1028(H) x 596(V)

976(H) x 494(V) 976(H) x 582(V)

2 : 1 Interlace / Progressive

Internal / Line Lock

H:15.734KHz / V:59.94Hz H:15.625KHz / V:50Hz

Color : ER mode Max 700TV lines(665 TVL ± 5%),B/W : 700TV lines

COLOR : 0.1 Lux (50IRE, @F1.2), 0.0002Lux (SENS-UP, x512)

B/W : 0.01Lux (50IRE, @F1.2), 0.00002Lux (SENS-UP, x512)

52dB (AGC off, Weight on)

CVBS : 1.0 Vp-p / 75Ω composite

3 ~ 8.5mm (2.8x)

F1.2

H: 105.5°(Wide)~37.1°(Tele),V: 57.5°(Wide)~21.0°(Tele)

DC Auto Iris

Board Type

0°~352° / 0°~73° / 0°~348°

Multi-language Support by Coaxial Cable English, Japanese, Spanish, French, Portuguese, Korean

Off / On (Displayed 15 characters)

Multi-language Support by Coaxial Cable English, French, German, Spanish, Italian, Chinese, Russian, Polish, Czech, Romanian, Serbian, Swedish, Danish, Turkish, Portuguese

●

SPECIFICATIONS

English_35

Specifications

Day & Night

Backlight Compensation

Wide Dynamic Range

Dynamic Range (SSDR)

Digital Noise Reduction (SSNR

Digital Image Stabilization

Privacy Masking

Sens-up (Frame Integration)

Gain Control

White Balance

Electronic Shutter Speed

Digital Zoom

Flip / Mirror

Profile

VPS

Communication

Environmental

Operating Temperature / Humidity

Electrical

Input Voltage

Power Consumption

Mechanical

Dimension

Weight

※

This speciﬁcation can be changed without notice for performance improvement of product.

Ⅲ )

SCD-3083N SCD-3083P

Auto (ICR) / EXTERNAL/ Color / B/W

Off/ USER BLC / HLC / WDR

128x 160x

Off / On

Off / On (12 Programmable zones, Polygonal type)

2x ~ 512x

Off/ Low / High

ATW / Outdoor / Indoor / Manual / AWC (1,700K° ~ 11,000K°)

1/60 ~ 1/120,000 sec 1/50 ~ 1/120,000 sec

Off / On (1x ~ 16x)

Off / H-Rev / V-Rev / HV-Rev

Basic, Day & Night, Backlight, ITS, Indoor, User

Off / On

Coaxial Control ( SPC-300 Compatible )

-10°C ~ +55°C (+14°F ~ +131°F) / Less than 90% RH

AC 24V ± 10% , DC 12V±10%

0.35A

Ø115.8 x 92.7mm

363g

36_ Speciﬁ

cations

DIMENSION

Ø115.8

Ø97

Unit: mm

●

SPECIFICATIONS

92.7

English_37

SALES NETWORK

SAMSUNG TECHWIN CO., LTD.

Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60, FAX : +82-31-8018-3745

SAMSUNG TECHWIN AMERICA Inc.

100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Fax : +1-201-373-0124 www.samsungcctvusa.com

www.samsungtechwin.com www.samsungsecurity.com

SAMSUNG TECHWIN EUROPE LTD.

Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS

+44-1932-45-5300, FAX : +44-1932-45-5325

TEL :

PT01-002077A

NO. :

Samsung SCD-3083 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual