Samsung SCD-3080B User Manual

High Resolution WDR Dome Camera SCD-3080 User Guide

High Resolution Varifocal Dome Camera SCD-3080 User Guide

Before installing and operating this product,

please read this manual thoroughly.

ENGLISH

Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we'll introduce our model description.

 SCD-3080 SERIES

• NTSC MODELS • PAL MODELS SCD-3080N

SCD-3080P

 MODEL DESCRIPTION

• SCD-3080X _

SIGNAL SYSTEM

• SIGNAL SYSTEM

N Ą NTSC MODEL P Ą PAL MODEL

The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

INFORMATION -

for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

WARNING -

 Do NOT use power sources other than that specified.  Do NOT expose this appliance to rain or moisture.

This equipment has been tested and found to comply with limits

Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

To prevent electric shock and risk of fire hazards:

This installation should be made by a qualified service person and

should conform to all local codes.

Contents

•

Features

 ДДДДДДДДДДДДДДДДДДДДДДДДДД 

Precautions

•

Components and Accessories

•

Overview

•

Installation

■



ДДДДДДДДДДДДДДДДДДДДДДДДД 

ДДДДДДДДДДДДДДДДД 

 ДДДДДДДДДДДДДДДДДДДДДДДДД 

 ДДДДДДДДДДДДДДДДДДДДДДДДД 

Installation

ДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД

■ Adjust the panning and tilting, rotating while watching the monitor

■



Connecting to Monitor

■ Connecting to Power ■ Using Coaxial Communications

•

Operating Your Camera

■

Menu Configuration

 ■ Menu Setup

LENS

ДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД 

 Â

EXPOSURE

 Â

WHITE BAL

 Â

BACKLIGHT

 Â

SSNR3

 Â

•

 ДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД 

DAY/NIGHT PROFILE

ДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД 

SPECIAL EXIT

ДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД 

Troubleshooting Specifications Dimension ДДДДДДДДДДДДДДДДДДДДДДДДДД 

ДДДДДДДДДДДДДДДДДДДДДДДДДДДД 

 ДДДДДДДДДДДДДДДДДДДДДДДДДДДД 

ДДДДДДДДДДДДДДДДДДДДДДД 

ДДДДДДДДДДДДДДДДДДДД 

ДДДДДДДДДДДДДДДДДДДДДДДДДДДДД 

 ДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД 

ДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД 

ДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД 

ДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД 

ДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД 

ДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД 

ДДДДДДДДДДДДДДДДДДДДДДД 

 ДДДДДДДДДДДДДДДДДДДДДДДД 

ÄÄÄ 

COLOR DOME CAMERA SCD-3080

Features

Ultra High Resolution

By adopting a double-speed 410,000 pixel Sony CCD, the camera produces clear picture quality with a horizontal resolution of 600 TV lines for color, and 700 TV lines for B/W.

Excellent Sensitivity

The built-in high sensitivity COLOR CCD produces a clear image.

- Color : 0.3 Lux (50IRE, @F1.2),

0.0006LUX (SENS-UP, x512)

- B/W : 0.01 Lux (50IRE, @F1.2),

0.00002 LUX (SENS-UP, x512)

Intelligence

Without assistance from an external sensor, this camera independently detects and traces objects while examining stillness and movement to activate the alarm.

SSNR3 (Samsung Super Noise Reduction) Function

The high-performance SV-V DSP chip effectively removes low-light gain noise and afterimage to provide clear images even in dark environments.

Day&Night (ICR)

This camera has a function that automatically selects the mode that is appropriate for daytime or night-time conditions. The COLOR mode operates in daytime conditions to provide optimum colors, and B/W mode operates in nighttime conditions to enhance the definition of the image.

SSDR (Samsung Super Dynamic Range)

For images with high contrast between bright and dark areas from difficult lighting conditions such as backlighting, this camera selectively illuminates darker areas while retaining the same light level for brighter areas to even out the overall brightness.

PROFILE

You can set a mode according to the camera installation conditions.

- BASIC, DAY/NIGHT, BACKLIGHT, ITS, INDOOR, USER

PIP

Displays a full-size image along with the thumbnail.

WDR

By adopting a proprietary SV-V DSP chip, the camera delivers clear, high quality pictures even when the scene is backlight, by increasing exposure in dark areas while decreasing it in bright areas; a corrected image with clear details results.

VPS(Virtual Progressive Scan)

Adopting Samsung’s unique development, the VPS (Virtual Progressive Scan) enhances the sharpness of moving subject’s outline. The VPS enables elective output in progressive mode using the existing interlaced input and effectively enhances the sharpness of captured pictures from video and still images. The function effectively removes blurred outline problems resulting in excellent road monitoring and improved license plate recognition.

COLOR DOME CAMERA SCD-3080

Features

Contents

DIS (Digital Image Stabilizer)

The DIS function compensates for any camera movement, to produce more stable pictures.

Miscellaneous Functions

HLC(High Light Compensation), SENS-UP, REVERSE , D-ZOOM, SHARPNESS and PRIVACY functions are provided.

Communication

Coaxial communication methods are supported.

- Protocol : Pelco Coaxitron

OSD

The camera’s OSD is complimented by 19 languages.

- NTSC : English, Korean, Japanese, Spanish, French, Portuguese, Taiwanese

- PAL : English, Chinese, German, Italian, French,

Spanish, Russian, Czech, Polish, Romanian, Serbian, Swedish, Danish, Turkish, Portuguese, Thai

COLOR DOME CAMERA SCD-3080

Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products. The Eco mark represents Samsung Techwin's will to create environment-friendly products, and indicates that the product satisfies the EU RoHS Directive.

Warnings & Cautions

This information is provided to ensure your safety and to prevent any losses, financial or otherwise. Please read it carefully and use the product accordingly.

* For product inquiries, please contact the retail shop where you bought the camera. The use of equipment such as

an aerial ladder while providing after-sales service shall be at your expense. * Separate the power plug during a thunder storm. * This product is support equipment for surveillance system. Therefore, we can't compensate for material loss and/or

personal injuries by robbery, fire, natural disaster or other such events.

Warning/Attention/Special Mark Messages

Ignoring this information may result in material loss and/or serious personal injuries including death.

Indicates "Never Allowed."

COLOR DOME CAMERA SCD-3080

Ignoring this information may result in material loss and/or a slight injuries.

Indicates "No Disassembling."

Precautions

Do not install under extreme temperature conditions.

-10ºC and +50ºC. Provide good ventilation when using in high temperature conditions.

Do not install under unstable lighting conditions.

Severe lighting changes or flickering may hinder normal camera operation.

Do not drop the camera or subject it to physical shock.

Do not install in high humidity environment.

May lower image quality.Use only under temperature conditions between

Avoid touching the camera lens.

The lens is the most important component of the camera. Be careful not to smear it with fingerprints.

Never keep the camera face to strong light directly.

May damage the CCD.May cause a product malfunction.

COLOR DOME CAMERA SCD-3080

Do not expose the camera to radioactivity.

Do not expose the camera to rain or other types of liquids.

If exposed to radioactivity, the CCD will fail.

May cause a product malfunction.Wipe dry any liquids. Liquids may contain minerals that are corrosive to electronic components.

Notes

• Exposure to a spotlight or an object emitting strong light may cause smear or blooming.

• Ensure that the power source complies with normal specifications before supplying it to the camera.

Components and Accessories

❶

➍

➋➌

High Resolution WDR Dome Camera SCD-3080 User Guide

Before installing and operating this product,

please read this manual thoroughly.

ENGLISH

❶

High Resolution WDR Dome Camera SCD-3080

➋

Instruction Manual

➌

M4 Tapping Screw 3EA

➍

Installation Video Output Cable

COLOR DOME CAMERA SCD-3080

Overview

⓬

❶

➌

⓫

R E

➏

➑ ➒ ❿ ➐

❶

Pan Base : Control panning angle of camera.

➋

Rotate Base : Control rotating angle of camera.

➌

x3.9 Vari-focal Lens Module 2.8 ~ 11mm (F1.2)

➍

Video Output Terminal to Monitor

➎

Function Setup switch : Display the menu on the screen and move the cursor to four

➏

Video Output Jack

➑

MD Output Terminal : Motion detection signals are output through this terminal.

➒

D & N Input Terminal : You can switch to Day & Night Mode by connecting an external

❿

Ground Terminal

(

D D

)

directions to confirm status or changing a selected item.

➐

Power Input Terminal

signal to this terminal.

⓫

Dome Cover

➍➎➋

⓬

Shield Case

Notes

•

Be sure to connect the Day & Night input terminal to GND when using an external input.

COLOR DOME CAMERA SCD-3080

Installation

1) Separate the dome cover by turning anti-clockwise.

2) Separate the shield case by pulling from the camera body.

* To install the dome cover on the camera

body, turn the latches in locking direction

Latch

as shown in the figure-1.

Locking direction

[Figure-1]

Installation

Main Body (Camera)

Shield Case

Unlocking direction (Anti-clockwise)

Notes

• The installation should be done by qualified service personnel or system installers.

• If the ceiling material is not strong enough to hold the installation screws, the camera may fall off. Reinforce the ceiling as needed.

• To change the position of the cable, take away the Hole Cover and pass the cable through.

COLOR DOME CAMERA SCD-3080

Locking direction (Clockwise)

Dome cover

Original position of the cable

Hole Cover

Installation

When using the Ceiling bracket

Ceiling bracket

M4 tapping screw (provided)

CAMERA

Unlocking

direction

Dome cover

An arrow for installing

1) Hold the ceiling bracket (located where the arrow points to) and separate it from the main body of the

directions

camera by rotating it anti-clockwise. (refer to the picture in 'Notes' on page 11)

2) Place the separated ceiling bracket so that the “Front” side faces the area to be monitored and install it with the M4 tapping screws.

3) To combine the main body with the ceiling bracket, make sure that the pan base fixation screw face the opposite side of the “Front” side of the ceiling bracket and rotate it clockwise.

4) Adjust the camera lens to face the area to be monitored and fix the main body and the dome cover by aligning the grooves and rotating the body clockwise.

Locking direction

M4 tapping screw

[Figure-2]

Notes

•

If you want to install the camera with the ceiling bracket combined, fix it using two M4

screws at the side of the main body (refer to the [Figure-2] on page 12).

tapping

COLOR DOME CAMERA SCD-3080

Pan Base fixation screw

Adjust the panning and tilting, rotating while watching the monitor

73˚

Rotate Base

Tilt Base

Pan Base

174˚

176˚

1) You can adjust the camera to any direction by using Pan, Tilt, Rotate mechanism.

• Pan Base moves by 176˚ to each side direction and 352˚ on the whole.

• Tilt Base covers total 73˚ angle(0˚ ~ 73˚).

• Rotate Base moves by 174° to each side direction and 348° on the whole.

2) Methods of adjustment

• Mounting on a wall

➊



After mounting the camera on a wall, adjusting the panning angle so that the camera can face the direction

to monitor when tilted.

➋



Adjust the tilting angle by rotating the tilt base.

➌



Loosen the rotate base hold screw and adjust rotate base for the best view.

➍



Tighten the rotate base hold screw.

• Mounting on a ceiling

➊



After mounting the camera on a ceiling, adjusting the panning angle to the correct viewing position by rotating

the pan base.

➋



Adjust the tilting angle by rotating the tilt base.

➌



Loosen the rotate base hold screw and adjust rotate base for the best view.

➍



Tighten the rotate base hold screw.

COLOR DOME CAMERA SCD-3080

Connection

Connecting to Monitor

Connect the Video Output jack to the VIDEO-IN jack of monitor.

CCTV Camera Monitor

•

As the connecting method varies with the instruments, refer to the manual supplied with the instrument.

•

If necessary, you can connect the monitor to the REMOTE jack on the back of your camera.

• Only connect the cable when the power is turned off.

Connecting to Power

Connect the adaptor to the power input terminal as shown in the figure below. The recommended adaptor specification for SCD-3080N/SCD-3080P is DC 12V / 500mA or AC 24V / 500mA.

For AC / DC power

• Since the power specification supports both AC and DC, connect AC 24V, 500mA Adaptor or DC 12V, 500mA Adaptor.

When the resistance value of copper wire is at [20˚C(68˚F)]

Copper wire size (AWG)

Resistance (Ω/m)

Voltage Drop (V/m)

• As shown in the table above, voltage decreases as the wire gets longer. Therefore use of

an excessively long adaptor output line for connection to the camera may affect the performance of the camera.

* Standard voltage for camera operation : DC 12V ± 10%, AC 24V ±10% * There may be some deviation in voltage drop depending on the type of wire and the manufacturer.

#24(0.22mm2) #22(0.33mm2) #20(0.52mm2) #18(0.83mm2)

0.078 0.050 0.030 0.018

0.028 0.018 0.011 0.006

---- Power Input Terminal

COLOR DOME CAMERA SCD-3080

Notes

• Be sure to connect power only after all the installation is complete.

• Note that AC / DC adaptor is not supplied with camera.

• Ground should be connected to the GND terminal.

Using Coaxial Communications

• Coaxial Communications System

• OSD Control method

DVD

CAMERA DVR CONTROLLER

SET MENU/ENTER OSD KEY

UP UP KEY JOYSTICK UP

DOWN DOWN KEY JOYSTICK DOWN

LEFT LEFT KEY JOYSTICK LEFT

RIGHT RIGHT KEY JOYSTICK RIGHT

DVR

: BNC

•

---- : RS-485

•

• Video Cable The camera's video output port is connected to the monitor with a BNC coaxial

cable, shown below : If the distance between the camera and the monitor exceeds the recommended maximum, please use an auxiliary video amp.

Distance Recommended Cable Specification

300m 3C2V(RG-59/U) 450m 5C2V(RG-6/U) 600m 7C2V(RG-11/U)

Notes

• It is recommended that pure copper coax cable is used and not copper coated steel, as this will cause issues with the communication over the coaxial cable.

COLOR DOME CAMERA SCD-3080

+ 33 hidden pages