Samsung SCD-2080R User Manual

High Resolution Day/Night IR
Dome Camera

User Manual

SCD-2080R

High Resolution Day/Night IR Dome Camera

B
T

■

■

User Manual

Copyright
©2010 Sam sung Techwi n Co., Ltd. A ll righ ts reser ved.

Tra dem ark

The name of t his product is the re gistered tradem ark of Samsung Techwin C o., Ltd.
Other tr ademarks mentio ned in this manual are t he registered tr ademark of their res pective compan y.

Restriction

Samsung Tech win Co., Ltd shall rese rve the copyrig ht of this document . Under no circumst ances, this docum ent
shall be rep roduced, distr ibuted or changed, p artially or who lly, without formal a uthorization o f Samsung Techwin.

Disclaimer

Samsung Tech win makes the best to v erify the integr ity and correc tness of the conte nts in this documen t, but
no formal gu arantee shall be pr ovided. Use of this d ocument and the sub sequent results s hall be entirely on
the user’s ow n responsibilit y. Samsung Techwin rese rves the right to c hange the content s of this document
without p rior notice.

Warra nty

If the pro duct does not oper ate properly in no rmal conditions , please let us know. S amsung Techwin will res olve
the probl em for free of charge. T he warranty pe riod is 3 years. How ever, the followings ar e excluded:

•

If the sys tem behaves abnorm ally because you r un a program irrelev ant to the system ope ration.

•

Deterio rated perform ance or natural wor n-out in proces s of time

is the regis tered logo of Sams ung Techwin Co., Ltd.

Before operating the camera, confirm the camera model and correct input power voltage.
To help you understand this manual thoroughly, we’ll introduce our model description.

■ SCD-2080R SERIES

• NTSC MODEL • PAL MODEL
SCD-2080RN SCD-2080RP

■ MODEL DESCRIPTION

• SCD-2080RX

_

SIGNAL SYSTEM

• SIGNAL SYSTEM
N → NTSC MODEL
P → PAL MODEL

safety information

C

6

7

8

9

2

3

4

5

6

7

8

9

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN

CAUTION:

WARNING

To prevent damage which may result in fi re or electric shock hazard, do not expose this

•
appliance to rain or moisture.

To prevent injury, this apparatus must be securely attached to the fl oor/wall in accordance

•
with the installation instructions.

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates that dangerous voltage consisting a risk of electric
shock is present within this unit.

This exclamation point symbol is intended to alert the user to the presence
of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.

WARNING

1.

Be sure to use only the standard adapter that is specifi ed in the specifi cation sheet.
Using any other adapter could cause fi re, electrical shock, or damage to the product.

2.

Incorrectly connecting the power supply or replacing battery may cause explosion, fi re,
electric shock, or damage to the product.

3.

Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause
abnormal heat generation or fi re.

4.

Securely plug the power cord into the power receptacle. insecure connection may cause
fi re.

5.

When installing the camera, fasten it securely and fi rmly. The fall of camera may cause
personal injury.

4_ safety information

1

1

1

6.

Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers
fi lled with water on top of the camera. doing so may cause personal injury due to fi re,
electric shock, or falling objects.

7.

Do not install the unit in humid, dusty, or sooty locations. doing so may cause fi re or
electric shock.

8.

If any unusual smells or smoke come from the unit, stop using the product. in such case,
immediately disconnect the power source and contact the service center. continued use in
such a condition may cause fi re or electric shock.

9.

c

e
e

If this product fails to operate normally, contact the nearest service center. never
disassemble or modify this product in any way. (samsung is not liable for problems caused
by unauthorized modifi cations or attempted repair.)

10.

When cleaning, do not spray water directly onto parts of the product. doing so may cause

fi re or electric shock.

● SAFETY INFORMATION

CAUTION

Do not drop objects on the product or apply strong shock to it. Keep away from a location

1.

subject to excessive vibrationor magnetic interference.

Do not install in a location subject to high temperature (over 50°C), low temperature (below

2.

-10°C), or high humidity. Doing so may cause fi re or electric shock.

If you want to relocate the already installed product, be sure to turn off the power and then

3.

move or reinstall it.

Remove the power plug from the outlet when then there is a lightning. Neglecting to do so

4.

may cause fi re or damage to the product.

Keep out of direct sunlight and heat radiation sources. It may cause fi re.

5.

Install it in a place with good ventilation.

6.

Avoid aiming the camera directly towards extremely bright objects such as sun, as this

7.

may damage the CCD image sensor.

Apparatus shall not be exposed to dripping or splashing and no objects fi lled with liquids,

8.

such as vases, shall be placed on the apparatus.

The Mains plug is used as a disconnect device and shall stay readily operable at any time.

9.

Do not expose the camera to radioactivity. Radioactivity exposure may damage the CCD.

10.

English_5

safety information

m

2
3
4
5
6
7

8

9

i

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions :

This device may not cause harmful interference, and

1)
This device must accept any interference received including interference that may cause

2)
undesired operation.

CAUTION

This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.

IC Compliance Notice

This Class A digital apparatus meets all requirements of the Canadian
Interference.-Causing Equipment Regulations of ICES-003.

Correct Disposal of This Product

(Applicable in the European Union and other European countries with separate collection systems)

This marking on the product, accessories or literature indicates that the product and its electronic accessories
(e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their
working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal,
please separate these items from other types of waste and recycle them responsibly to promote the sustainable
reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government
office, for details of where and how they can take these items for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

Correct disposal of batteries in this product

(Applicable in the European Union and other European countries with separate battery return systems.)

This marking on the battery, manual or packaging indicates that the batteries in this product should not be
disposed of with other household waste at the end of their working life. Where marked, the chemical symbols
Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC
Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health
or the environment.

To protect natural resources and to promote material reuse, please separate batteries from other types of waste
and recycle them through your local, free battery return system.

(Waste Electrical & Electronic Equipment)

6_ safety information

1

1

1
1

1

1

o

important safety instructions

Read these instructions.

e

1.

Keep these instructions.

2.

Heed all warnings.

3.

Follow all instructions.

4.

Do not use this apparatus near water.

5.

Clean only with dry cloth.

6.

Do not block any ventilation openings. Install in accordance with the manufacturer’s

7.

instructions.
Do not install near any heat sources such as radiators, heat registers, or other apparatus

8.

(including amplifi ers) that produce heat.

9.

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong is provided for your safety. If
the provided plug does not fi t into your outlet, consult an electrician for replacement of the
obsolete outlet.

10.

Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11.

Only use attachments/accessories specifi ed by the manufacturer.

12.

Use only with cart, stand, tripod, bracket, or table specifi ed by the

manufacturer, or sold with the apparatus.

13.

Unplug this apparatus when a card is used. Use caution when moving the

cart/ apparatus combination to avoid injury from tip-over.

14.

Refer all servicing to qualifi ed service personnel. Servicing is required when the apparatus

has been damaged in any way, such as powersupply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.

Apparatus shall not be exposed to dripping or splashing and no objects
fi lled with liquids, such as vases, shall be placed on the apparatus

Samsung Techwin cares for the environment at all product manufacturing
stages to preserve the environment, and is taking a number of steps to provide
customers with more environment-friendly products.The Eco mark represents
Samsung Techwin’s will to create environment-friendly products, and indicates
that the product satisfies the EU RoHS Directive.

● SAFETY INFORMATION

English_7

contents

F

y

y

y

y

y

y

y

y

y

n

INTRODUCTION

TROUBLESHOOTING

SPECIFICATIONS

9

INSTALLATION

12

CONNECTION

16

SETUP

18

31

32

9

Features

10

What’s included

11

Component names and

Functions

12

Installation

15

Adjust the panning and tilting

while watching the monitor

16

Connecting to Monitor

16

Connecting to Power

17

Using Coaxial Communications

18

Menu Confi gration

18

Menu Setup

31

Troubleshooting

32

Specifi cations

34

Dimension

i

8_ contents

introduction

FEATURES

y

Ultra High Resolution

By adopting a diagonal 6mm(1/3") 410,000 (NTSC) pixels, 470,000(PAL)
pixels SONY CCD, the camera produces clear picture quality with a horizontal
resolution of 600 TV lines for color and 700 TV lines for BW

y

Excellent Sensitivity

The Built-in high sensitivity COLOR CCD enables a clear image even in 0Lux(B/
W,IR-LED ON) or lower illumination,

y

SSNR3 (Samsung Super Noise Reduction) Function

The high-performance W-V DSP chip effectively removes low-light gain noise
and afterimage to provide clear images even in dark environments.

y

Day & Night (ICR)

This camera has a function that automatically selects the mode that is appropriate
for daytime or night-time conditions.
The COLOR mode operates in daytime conditions to provide optimum colors, and
B/W mode operates in night-time conditions to enhance the defi nition of the image.

y

IR MODE Function

The intensity of the IR-LEDs automatically adjust depending upon the closeness
of the object to prevent saturation.

y

Indoor Visibility range 20M

In B/W mode, the IR-LEDs are illuminated, the indoor visibility range at 0 Lux
is 20M

y

SSDR (Samsung Super Dynamic Range)

For images with high contrast between bright and dark areas from diffi cult lighting
conditions such as backlighting, this camera selectively illuminates darker areas
while retaining the same light level for brighter areas to even out the overall
brightness.

y

DIS (Digital Image Stabilizer)

The DIS function compensates for any camera movement, to produce more
stable pictures.

y

Communication

Coaxial communication methods are supported.

- Protocol : Pelco Coaxitron

● INTRODUCTION

English_9

introduction

C

y

Miscellaneous Functions

HLC(High Light Compensation), SENS-UP, H/V-REV, D-ZOOM, SHARPNESS,
MOTION DETECTION and PRIVACY functions are provided.

y

OSD

The camera control is convenient by using 18 different foreign language O.S.D.

- NTSC : English, French, Spanish, Japanese, Korean, Portuguese, Taiwanese

- PAL : English, French, German, Spanish, Italian, Chinese, Czech, Danish,
Polish, Portuguese, Russian, Romanian, Serbian, Swedish, Turkish

WHAT’S INCLUDED

Check if the following items are included in the product package.

High Resolution D/N IR
Dome Camera

User Manual

SCD-2080R

SCD-2080R User Manual Quick Set-up Guide

M4 Tapping Screw 3EA

Installation Video

Output Cable

High Resolution D/N IR
Dome Camera

Quick Set-up Guide

SCD-2080R

10_ introduction

COMPONENT NAMES AND FUNCTIONS

FRONT

➋

➑

➏

➐

❶

Pan Base : control panning angle of camera

❷

Tilt Base : control tilting angle of camera

❸

Video Output Terminal to Monitor

❹

x3.6 Vari-focal Lens Module 2.8 ~ 10.0mm (F1.2)

❺

Function Setup switch : Display the menu on the screen and move the cursor

❻

Power Input Terminal

➐

Video Output Jack

➑

Dome Cover

❶

➎

to four directions to confirm status or after changing a
selected item.

➌

➍

● INTRODUCTION

English_11

installation

INSTALLATION

Separate the dome cover by turning anti-clockwis.

1.

Separate the shield case by pulling from the camera body.

2.

Latch

Locking direction

[Figure1]

Unlocking direction
(Anti-clockwise)

※

To install the dome cover on the camera body, turn the latches in the locking direction as

shown in the figure 1.

The installation should be done by qualifi ed



service personnel or system installers.

If the ceiling material is not strong enough to



hold the installation screws, the camera may
fall off. Reinforce the ceiling as needed.

To change the position of the cable, take



away the Hole Cover and pass the cable
through.

Main Body
(Camera)

Locking direction
(Clockwise)

Dome cover

Original position of
the cable

Hole Cover

12_ installation

WHEN USING THE CEILING BRACKET

Ceiling bracket

An arrow for installing

directions

M4 tapping
screw (provided)

CAMERA

Locking
direction

Unlocking

direction

Dome cover

Hold the ceiling bracket (located where the arrow points to) and separate it

1.

from the main body of the camera by rotating it anti-clockwise.
(refer to the picture in 'Notes' on page 12)

Place the separated ceiling bracket so that the “Front” side faces the area to be

2.

r

monitored and install it with the M4 tapping screws.

To combine the main body with the ceiling bracket, make sure that the pan

3.

base fi xation screw face the opposite side of the “Front” side of the ceiling
bracket and rotate it clockwise.

Adjust the camera lens to face the area to be monitored and fi x the main body

4.

and the dome cover by aligning the grooves and rotating the body clockwise.

● INSTALLATION

English_13

installation

A
W

M4 tapping
screw

If you want to install the camera with the ceiling bracket combined, fi x it using two M4 tapping



screws at the side of the main body (refer to the [Figure-2] on page 14)

[Figure-2]

Pan Base
fixation
screw

14_ installation

ADJUST THE PANNING AND TILTING WHILE
WATCHING THE MONITOR

174˚

176˚

Pan Base

g

You can adjust the camera to point in any direction by using the pan, Tilt

1.

mechanism.

y

Pan Base can rotates by ±176°(total 352°)

y

Tilt Base covers 73˚ angle.

y

Rotate Base moves by 174° to each side direction and 348° on the whole.

2.

Methods of adjustment

y

When installing on a wall

➊

After mounting the camera on a wall, adjust the panning angle so that the
correct viewing angle is attained and the titling is correctly orientated.

➋

And then adjust the tilting angle by rotating the tilt base.

➌

Loosen the rotate base hold screw and adjust rotate base for the best view.

➍

Tighten pan and tilt securing screw.

y

When installing on a ceiling

➊

After mounting the camera on a ceiling, adjust the panning angle so that the
correct viewing angle is attained and the titling is correctly orientated.

➋

And then adjust the tilting angle by rotating the tilt base.

➌

Loosen the rotate base hold screw and adjust rotate base for the best view.

➍

Tighten pan and tilt securing screw.

When you want to adjust the Pan/Tilt Base, loosen, adjust and then tighten the Pan/Tilt Base



screws.

73˚

Rotate Base
Tilt Base

English_15

● INSTALLATION

connection

U

y
y

CONNECTING TO MONITOR

Connect the VIDEO-OUT jack to the VIDEO-IN jack of monitor.

CCTV Camera

y

As the connecting method varies with the instruments, refer to the manual supplied
with the instrument.

y

Only connect the cable when the power is turned off.

Monitor

CONNECTING TO POWER

Connect the adaptor to the power input connector as shown in the fi gure below.
The recommended adaptor specifi cation for SCD-2080RN/SCD-2080RP is DC 12V / 500mA.

---- Power Input Terminal

When the resistance value of copper wire is at [20°C(68°F)]

Copper wire size

(AWG)

Resistance (Ω/m) 0.078 0.050 0.030 0.018

Voltage Drop (V/m) 0.028 0.018 0.011 0.006

y

As shown in the table above, voltage decreases as the wire gets longer. Therefore,
the use of an excessively long power cable to the camera may affect the camera’s
performance.

16_ connection

#24

(0.22mm2)

#22

(0.33mm2)

#20

(0.52mm2)

#18

(0.83mm2)

*
*

* Standard voltage for camera operation : DC 12V ± 10%
* There may be some deviation in voltage drop depending on the type of wire and the

manufacturer.

Be sure to connect power only after all the installation is complete.




Ground should be connected to the GND terminal.

● CONNECTION

USING COAXIAL COMMUNICATIONS

y

Coaxial Communications System

y

OSD Control method

CAMERA DVR CONTROLLER

SET MENU/ENTER OSD KEY

UP UP KEY JOYSTICK UP

DOWN DOWN KEY JOYSTICK DOWN

LEFT LEFT KEY JOYSTICK LEFT

RIGHT RIGHT KEY JOYSTICK RIGHT

DVR

ALARM HDD NETWORK BACKUP REC

REC

1234

5678

9101112

.

DVD RECORDER

OPEN/CLOSE

R
E
C

C
A
M

M
O
N

1

2

6
7

8

- Video Cable
The camera’s video output port is connected to the monitor with a BNC coaxial

cable, shown below : If the distance between the camera and the monitor exceeds
the recommended maximum, please use an auxiliary video amp.



,

s

If the camera is controlled through coaxial communication, please use a video amp intended for
coaxial communications. Regular video amps do not transfer coaxial signals.

TELE WIDE VIEW

MODE AUDIO ALRAM

MENU

13 14 15 16

USB

RETURN

M
E
N
U

S
E
A
RC
H

M
U
L
T
I

M
E
N
U

P
R
E
S
E
T

G
R
O
U

P
P
T
Z

D
V
R

T
R

M

A

T

C

X

K

3

S
E
T
U
P

4

F
U
N
C

5

E
N
T
E

E

R
S
C

C
L
O
S

9

E

O
P
E
N

0

N
E
A
R
F

A
R

W

I
D
E

T
E
LE

•

---- : RS-485

•

Distance Recommended Cable Specifi cation

300m 3C2V(RG-59/U)

450m 5C2V(RG-6/U)

600m 7C2V(RG-11/U)

: BNC

English_17

setup

S
b
d

u

MENU CONFIGRATION

Setup Menu

●

LENS

EXPOSURE

WHITE BALANCE

SSDR

BACKLIGHT

SSNR3

DAY/NIGHT

SPECIAL

EXIT

MENU SETUP

Use the Function Setup switch beside of the lens.

Function Setup switch

DC

●

BRIGHTNESS

●

SENS-UP

●

ATW

●

MANUAL

●

OFF

●

OFF

●

OFF

●

AUTO

●

IMAGE ADJ

●

MOTION DET

●

LANGUAGE

●

SAVE

●

SHUTTER

●

RETURN

●

OUTDOOR

●

AWC→SET

●

ON

●

BLC

●

ON

●

COLOR

●

MONITOR

●

PRIVACY

●

RETURN

●

NOT SAVE

●

AGC

●

INDOOR

●

HLC

●

B/W

●

CAM TITLE

●

DIS

●

RESET

f

Press the Function Setup switch.

1.

y

Main setup menu is displayed on the monitor screen.

18_ setup

Select the function
by moving up or
down direction of
function setup switch.

䯝 1.LENS DC

2.EXPOSURE

3.WHITE BAL ATW

4.SSDR OFF

Change the status
by moving the
setup switch left or
right.

5.BACKLIGHT OFF

6.SSNR3 ON

7.DAY/NIGHT AUTO

8.SPECIAL

9.EXIT SAVE

MAIN SETUP

Select a desired function using the Function Setup switch.

2.

y

Place the cursor over a desired item.

Set up a selected item by using the Function Setup switch.

3.

To fi nish the setting, select ‘EXIT’ and press the Function Setup switch.

4.

An item with the icon also has sub menus. To select a sub menu, select an item with the icon



and press the Function Setup switch.



An item with the - - - icon is unavailable due to function settings.

LENS

Using this function, you can control the screen brightness.

When the SETUP menu screen is displayed,

1.

select ‘LENS’ by using the Function Setup
switch so that the arrow indicates ‘LENS’.

The Lens mode has sub menu site as listed below.

2.

y

BRIGHTNESS : Adjusts the video brightness.

y

FOCUS ADJ : To adjust the lens focus correctly, you must activate the Focus Settings mode. To
activate the Focus Settings mode, adjust the lens focus, and then deactivate the settings mode.

y

You can adjust the shutter value of ESC shutter mode.

MAIN SETUP

䯝 1.LENS DC

2.EXPOSURE

EXPOSURE

1.

When the SETUP menu screen is displayed,
select EXPOSURE by using the Function
Setup switch so that the arrow indicates
'EXPOSURE'.

MAIN SETUP

1.LENS DC
䯝 2.EXPOSURE

3.WHITE BAL ATW

● SETUP

English_19

setup

2.

Select a desired mode using the Function
Setup switch.

BRIGHTNESS : Adjusts the video brightness.

y

SHUTTER : You can select either auto or

y

y

y

manual shutter.

A.FLK :

Select this when you experience

-

picture fl icker, which can happen
when there is a clash with the frequency of the installed lighting.

ESC : Select this to control the shutter speed automatically. If ESC is

-

selected, the shutter speed is automatically controlled depending on
the ambient illumination of the subject.

MANUAL : You can control shutter speed manually.

-

-




AGC (AUTO GAIN CONTROL)

The higher the gain level, the brighter the
screen but the higher the noise.

-

-

-

SENS-UP

-

-









(NTSC MODEL : 1/60~1/120,000, PAL MODEL : 1/50~1/120,000)

--- : Shutter speed is fi xed at 1/60sec(1/50sec).

Set the shutter mode to --- if color rolling occurs.
When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.

OFF : Deactivates the AGC function.
LOW : Allows automatic gain control

from 5.3dB to 32dB.

HIGH : Allows automatic gain control from 5.3dB to 37dB.

: When it is night or dark, the camera automatically detects the light level

and maintains a clear picture if this mode is activated.

OFF : Deactivates the SENS-UP function.
AUTO : Activates the SENS-UP function.

If you press the Function Setup switch in ‘AUTO’ mode, You can adjust brightness by adjusting
the SENS-UP level. (x2 ~ x512)

Note that the higher the SENS-UP level, the brighter the screen, but the more likely it is that an
after-image will appear.

Although Noise, Spots, and Whitish symptoms may occur in SENS-UP operation when the
sens-up level is increased, this is normal.

If GAIN of EXPOSURE is not in use, the SENS-UP is set to “---“.

EXPOSURE SETUP

䯝 1.

BRIGHTNESS

2.SHUTTER

3.AGC HIGH

4.SENS-UP OFF

5.RETURN

:

䯝 AUTO x2

IIIIIÂIIIIIIIIIIIIIIII

LIMIT

Press SET to Return

25

---

20_ setup

WHITE BAL (WHITE BALANCE)

Use the White Balance function to adjust the screen color.

When the SETUP menu screen is displayed,

1.

select ‘White Bal’ by using the Function
Setup switch so that the arrow indicates
‘White Bal’.

2.

Select a desired mode using the Function
Setup switch.

)

※ Select one of the following 5 modes, as appropriate for your purpose.

y

: Select this when the color temperature is between 1,700°K and 11,000°K.

ATW

y

OUTDOOR

: Select this when the color temperature is between 1,700°K and

11,000°K.(sodium light inclusion)
Select this when the color temperature of environment surrounding
the subject is out of the control range (e.g. clear sky, or sunset).

y

INDOOR

: Select this when the color temperature is between 4,500°K and 8,500°K.

y

MANUAL : Select this to fi ne-tune White

Balance manually. Set White
Balance fi rst by using the ATW
or AWC mode. After that switch
to MANUAL mode, fi ne-tune the
White Balance and then press
the Function Setup switch.

y

AWC→SET

: To fi nd the optimal luminance level for the current environment,

point the camera towards a sheet of white paper and press the
Function Setup switch. If the environment changes, readjust it.



White Balance may not work properly under the following conditions.

➊

When the ambient illumination of the subject is dim.

➋ If the camera is directed towards a fl uorescent light or is installed in a

place where illumination changes dramatically, the White Balance
operation may become unstable.

MAIN SETUP

1.LENS DC

2.EXPOSURE
䯝 3.WHITE BAL ATW

4.SSDR OFF

WB MANUAL

䯝 RGAIN
BGAIN

Press SET to Return

IIIIIIIIIIIIIIIIÂIIIIIIIIIIIIII

IIIIIIIIIIIIIIIIÂIIIIIIIIIIIIII

529
532

● SETUP

English_21

setup

SSDR (SAMSUNG SUPER DYNAMIC RANGE)

SSDR illuminates darker areas of an image while retaining the same light level for
brighter areas to even out the overall brightness of images with high contrast between
bright and dark areas.

When the SETUP menu screen is displayed,

1.

select ‘SSDR’ by using the Function Setup
switch so that the arrow indicates ‘SSDR’.

2.

Use the Function Setup switch to change
the SSDR level in the sub menu according to
the contrast between bright and dark areas.

MAIN SETUP

1.LENS DC

2.EXPOSURE

3.WHITE BAL ATW
䯝 4.SSDR OFF

5.BACKLIGHT OFF

SSDR ON

SSDR OFF

BACKLIGHT

The SCD-2080R is designed so that it delivers a distinctive subject and background
at the same time, even when the subject is in backlight, by adopting a function of the
proprietary W-V DSP chip.

1.

When the SETUP menu screen is displayed,
select ‘BACKLIGHT’ by using the Function
Setup switch so that the arrow indicates
BACKLIGHT .

Select a desired mode using the Function Setup

2.

switch depending on the camera purpose.

MAIN SETUP

1. LENS DC

2. EXPOSURE

3. WHITE BAL ATW

4. SSDR OFF
䯝 5. BACKLIGHT OFF

6. SSNR3 ON

22_ setup

BLC

: Enables a user to directly select a desired area from a picture, and to view

y

r

the area more clearly.

-

LEVEL : Adjust level of the BLC function.

-

TOP/BOTTOM/LEFT/RIGHT :
Adjust the area to be enhanced.

y

HLC (High Light Compensation) :

This function masks the strong light to minimize white out due to over exposure and
preserve much of the on-screen details when the camera aims a strong light source.

-

LEVEL : Adjust level of the HLC function.

-

LIMIT : Enable to change the operating condition.

-

MASK COLOR/TONE :
Change the color / brightness of the masking area. (Black, Red, Blue, Cyan, Magenta)

-

TOP/BOTTOM/LEFT/RIGHT :
Adjust the area to be enhanced.

y

OFF

: Not being used

3.

Select a desired mode using the Function Setup switch and press the switch.

Select ‘BLC’ to adjust the area to be
enhanced then adjust the level.

BLC SETUP

䯝 LEVEL
TOP
BOTTOM
LEFT
RIGHT

IIIIIÂIIIIIIIIIIIIIIII

IIIIIIIIIIIIIIIIIIÂIII

IIIIIIÂIIIIIIIIIIIIIII

IIIIIIIIIIIIIIIIÂIIIII

MIDDLE

Press SET to Return

HLC : Enable the user to change the level,

limit, mask color/tone and area.

HLC SETUP

䯝 LEVEL
LIMIT

38

109

121

MASK COLOR BLACK
MASK TONE

54

TOP
BOTTOM
LEFT
RIGHT

NIGHT ONLY

Â

IIIIIIIIIIIIIIIIIIIII

Â

IIIIIIIIIIIIIIIIIIIII

IIIIIIIIIIIIIIIIIIÂIII

Â

IIIIIIIIIIIIIIIIIIIII

IIIIIIIIIIIIIIIIIIIIÂI

MIDDLE

120

172

1
5

5

● SETUP

Press SET to Return

Because there can be a difference in the effectiveness of HLC according to the amount of light



area in the screen, optimize the installation angle for the best HLC performance.
In a dark environment, the HLC is only activated when a high light that is larger than a certain area



is present.
The HLC is not activated in overly bright or dark condition. (In NIGHT ONLY mode.)



When HLC Function is used, D-ZOOM and DIS function are not activated.



BLC function does not work in B/W mode.



English_23

setup

SSNR3

This function reduces the background noise in a low luminance environments.

When the SETUP menu screen is displayed,

1.

select 'SSNR3' by using the Function Setup
switch so that the arrow indicates 'SSNR3' .

Select a desired mode using the Function

2.

Setup switch.

: Deactivates SSNR3 so that noise is

OFF

y

not reduced.

ON

: Activates SSNR3 so that noise is

y

reduced.

Set the SSNR3 mode to 'ON' and press the

3.

Function Setup switch. Then you can adjust
the noise reduction level.

You cannot set the SSNR3 to 'ON' or 'OFF' when the AGC mode of the EXPOSURE menu is 'OFF'.



When adjusting the noise reduction level of the SSNR3 mode, remember that the higher the level



set, the more the noise level will be reduced but that after image may also occur.

DAY/NIGHT

You can display pictures in color or black and white.

1.

When the SETUP menu screen is displayed,
select ‘DAY/NIGHT’ by using the Up and
Down buttons so that the arrow indicates
‘DAY/NIGHT’.

2.

Select a desired mode using the Left and
Right buttons according to the picture
display you want.

MAIN SETUP

1.LENS DC

2.EXPOSURE

3.WHITE BAL ATW

4.SSDR OFF

5.BACKLIGHT OFF
䯝 6.SSNR3 ON

7.DAY/NIGHT AUTO

SSNR3

䯝 LEVEL

1.LENS DC

2.EXPOSURE

3.WHITE BAL ATW

4.SSDR OFF

5.BACKLIGHT OFF

6.SSNR3 ON
䯝 7.DAY/NIGHT AUTO

8.SPECIAL

IIIIÂIIIIIIIIIIIIIIIII

Press SET to Return

MAIN SETUP

10

24_ setup

COLOR

: The picture is always displayed in color.

y

y

B/W

: The picture is always displayed in black and white.

You can turn on or off the burst signal on B/W mode.

-

IR LED Mode : On: 12EA, Off: 6EA

-

IR Mode : When IR LED is turned on

in B/W, the objects can be
clearly identifi ed due to the
function that decreases screen
saturation of objects within a
short distance.

y

AUTO

: The mode is switched to ’Color’

in a normal environment, but
switches to ’B/W‘ mode when
ambient illumination is low.
To set up the switching time for
AUTO mode, press the Function
Setup switch.

-

BURST MODE : You can turn on or
off the burst signal on B/W mode.

-

DWELL TIME : You can select the duration time about changing the day/

l

-

DURATION : You can select the brightness level at which the camera

night mode.

→

3s, 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s

switches from day to night mode.

Fast 2.5 lux 5 lux

Slow 1 lux 10 lux

Color → B/W B/W → Color

IR MODE SETUP
TOP
BOTTOM
LEFT
RIGHT

AUTO SETUP

▶ 1.BURST MODE ON

2.COLOR→B/W
DURATION FAST
DWELL TIME 3 SEC

3.B/W→COLOR
DURATION FAST
DWELL TIME 10 SEC

4.RETURN

IIIIIÂIIIIIIIIIIIIIIII

IIIIIIIIIIIIIIIIIIÂIII

IIIIIIÂIIIIIIIIIIIIIII

IIIIIIIIIIIIIIIIÂIIIII

110

118

● SETUP

50

52

※ Light levels are often site dependant.

When AGC in the EXPOSURE menu is 'OFF', '---' mode operates as selecting 'COLOR' mode



and 'AUTO' mode cannot be selected.

The OSD key does not work for 3 seconds when switching to Color or B/W, to ensure stable



camera operation.

BLC function does not work in B/W mode.



English_25

setup

SPECIAL

When the SETUP menu screen is displayed,

1.

select ‘SPECIAL’ by using the Function
Setup switch so that the arrow indicates
‘SPECIAL’.

Select a desired mode using the Function

2.

Setup switch.

IMAGE ADJ :

y

1) When the SPECIAL menu screen is
displayed, select ‘IMAGE ADJ’ by using
the Function Setup switch so that the
arrow indicates ’IMAGE ADJ‘.

2) Select a desired mode using the Function

Setup switch.
V-REV : You can flip the picture vertically

-

on the screen.

H-REV : You can flip the picture horizontally on the screen.

-

D-ZOOM : You can use a digital zoom of x1 ~ x16.

-

FONT COLOR : You can change the OSD font color.

26_ setup

-

SHARPNESS : As you increase this value, the picture outline becomes stronger and

-

RETURN : Select this to save the settings for the IMAGE ADJ menu and to

-

(White, Yellow, Green, Red, Blue)

clearer. Adjust this value appropriately depending on the sharpness
of the picture.

return to the SPECIAL menu.

MAIN SETUP

1.LENS DC

2.EXPOSURE

3.WHITE BAL ATW

4.SSDR OFF

5.BACKLIGHT OFF

6.SSNR3 ON

7.DAY/NIGHT AUTO
䯝 8.SPECIAL

9.EXIT SAVE

#䯝 1.IMAGE ADJ

2.MONITOR LCD

3.CAM TITLE OFF

4.MOTION DET OFF

5.PRIVACY OFF

6.DIS OFF

7.LANGUAGE ENGLISH

8.RETURN

䯝 1.V-REV OFF

2.H-REV OFF

3.D-ZOOM OFF

4.FONT COLOR WHITE

5.SHARPNESS ON

6.RETURN

SPECIAL

IMAGE SETUP

If you increase the SHARPNESS level too high, the picture may become distorted or noise



may appear.

:

Please change the settings value of

y

Monitor

video appropriate to your monitor.

LCD :

Please select this menu item when

-

using an LCD monitor.
You can change the gamma, PED
level and color gain in the sub menus.

-

CRT : Please select this menu item when

using a CRT monitor.

Please use this menu item when using a monitor other than standard ones.

-

USER :

You can change the gamma, PED level and color gain in the sub menus.

y

CAM TITLE

:

If you enter a title, the title will appear on the monitor.

➊

If the SPECIAL menu screen is
displayed, use the Function Setup
switch so that the arrow indicates
‘CAM TITLE’.

➋

Set it to ‘ON’ by using the Function
Setup switch.

➌

Press the Function Setup switch.

➍

Use the Function Setup switch to
move to a desired letter and select the
letter by pressing the switch. Repeat
this to enter multiple letters. You can
enter up to 15 letters.

➎

Enter a title, move the cursor to ’POS’
and press the Function Setup switch. The
entered title appears on the screen. Select
the position to display the title on the screen
by using the Function Setup switch and
press. When the position is determined,
select ’END’ and press the Function Setup
switch to return to the SPECIAL menu.

LCD MONITOR

▶ GAMMA 0.55
PED LEVEL
COLOR GAIN
RESET

CAMERA TITLE SETUP

ABCDEFGHIJKLM
NOPQRSTUVWXYZ
abcdefghijklm
nopqrstuvwxyz

-.0123456789
←→ CLR PO S END

_______________

IIIIIÂIIIIIIIIIIIIIIII

IIIIIIIIIIIIIIIÂIIIIII

Press SET to Return

FRONT DOOR

● SETUP

17
50

English_27

setup

When the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor screen even if you



enter one.



Only English is available in the mode.



If you move the cursor to CLR and press the Function Setup switch, all the letters are deleted.
To edit a letter, change the cursor to the bottom left arrow and press the Function Setup switch.
Move the cursor over the letter to be edited, move the cursor to the letter to be inserted and then
press the Function Setup switch.

MOTION DET

y

This product has a feature that allows you to observe movement of objects in 8
different areas on the screen, and the words 'MOTION DETECTED' appear on
the screen when movement is detected. You can monitor activity more effi cient.

➊

➋

-

-

-

-

-

-

-



:

When the SPECIAL menu screen is
displayed, press the Function Setup
switch so that the arrow indicates
'MOTION DET'.

Set up the mode using the Function
Setup switch.

SENSITIVITY :
You can select up to 8 MD areas.
When SENSITIVITY number is high, motion detection sensitivity is
increased to recognize even small movement.

AREA MODE : Determines whether to use the MD area selected in SENSITIVITY.

SEL POS :

Determines which of the 4 vertices of each MD area is to be used.

XPOS : Determines the coordinate of the horizontal axis for SEL POS.
YPOS : Determines the coordinate of the vertical axis for SEL POS.

FILL → SET : Fills in a selected MD area. The color of fi lling is sequentially

RETURN : Select this to save the MOTION DET menu settings and return

MD areas show only MOTION DET menu. Therefore, MD areas are only displayed while setting the
MD menu.

selected as brown, orange, blue, cyan, yellowish green, yellow,
magenta and red.

to the SPECIAL menu.

MOTION DET

䯝 1.SENSITIVITY AREA1

2.AREA MODE ON

3.SEL POS L-TOP

4.XPOS

5.YPOS

6.FILL → SET

7.RETURN

Â

IIIIIIIIIIIIIIIIIIIII

IIIÂIIIIIIIIIIIIIIIIII

3
5

28_ setup

y

PRIVACY

u

n

: Mask an area you want to hide on the screen.

➊ When the SPECIAL menu screen is

displayed, press the Function Setup
switch so that the arrow indicates
‘PRIVACY’.

➋ Set up the mode using the Function

Setup switch.

AREA : You can select up to 12

-

PRIVACY areas.

MODE : Determines whether to use

-

the area selected in the
AREA SEL, and the size and
position of the area.

-

MASK COLOR : Determine area color. You can select GREEN, RED,

-

MASK TONE : Adjust the brightness of MASK COLOR.

-

TOP/BOTTOM/LEFT/RIGHT : Adjust the size and position of the selected area.

RETURN : Select this to save the PRIVACY menu settings and return to

-

BLUE, BLACK, WHITE and GRAY.

the SPECIAL menu.

PRIVACY AREA SETUP

䯝 1.AREA AREA1

2.MODE OFF

3.MASK COLOR GREEN

4.MASK TONE

5.TOP

6.BOTTOM

7.LEFT

8.RIGHT

9.RETURN

Â

IIIIIIIIIIIIIIIIIIIII

IIÂIIIIIIIIIIIIIIIIIII

IIIIIÂIIIIIIIIIIIIIIII

Â

IIIIIIIIIIIIIIIIIIIII

IIIÂIIIIIIIIIIIIIIIIII

1

39
79
13
52

● SETUP

DIS (Digital Image Stabilizer)

y

This function mitigates any picture movement due to external factors such as wind.

As the DIS function uses the digital zoom the camera's resolution will decrease.

.

.

,



DIS doesn’t operate when background illumination is too low.



DIS doesn’t operate when object pattern is monotonic as like sky or white wall.



If DIS is enabled, the digital zoom is not confi gured to less than x1.2 level.



LANGUAGE

y

y

RETURN

: You can select the menu language according to your requirements.

: Select this to save the SPECIAL menu settings and return to the MAIN

SETUP menu.

:

English_29

setup

t

T

n

EXIT

Select a desired EXIT mode using the Function Setup switch depending on the camera
purpose.

SAVE : Save the current settings and exit the MAIN SETUP menu.

y

NOT SAVE : Do not save the current settings and exit the MAIN SETUP menu.

y

y

RESET: Resets the camera settings to the factory defaults.

Language and Monitor settings are not initialized.

If

30_ setup

troubleshooting

TROUBLESHOOTING

If you have trouble operating your camera, refer to the following table. If the guidelines do
not enable you to solve the problem, contact an authorized technician.

PROBLEM SOLUTION

Nothing appears on the screen.

The image on the screen is dim.

The image on the screen is dark.

The camera is not working
properly, and the surface of the
camera is hot.

The DAY/NIGHT menu does not
work.

The SENS-UP function does not
work.

The Motion Detection function does
not work.

Color is not correct.

The screen fl ickers continually.

IR-LED isn't lighted.

▶ Check that the power cord and line connection between the camera

and monitor are fi xed properly.

▶ Check that you have properly connected VIDEO cable to the camera

VIDEO output jack.

Is the lens stained with dirt? Clean your lens with a soft, clean cloth.

▶
▶

Check the monitor and DVR settings.

▶

If the camera is exposed to very strong light, change the camera position.

▶ Adjust the contrast feature of the monitor or DVR.
▶ If you have an intermediate device, set the 75Ω / Hi-z properly.

▶ Check that you have properly connected the camera to an appropriate

power source.

▶ Check that AGC of EXPOSURE SETUP menu is ‘OFF’.

▶ Check that AGC of EXPOSURE SETUP menu is ‘OFF’.
▶ Check that SHUTTER of EXPOSURE SETUP menu is ‘A.FLK’ or

‘MANUAL’.

▶

Check that MOTION DEF of SPECIAL SETUP menu is ‘OFF’.

▶ Check the setting of WHITE BAL SETUP menu .

▶ Check that the camera is not pointing at the sun.

▶ Isn't DAYNIGHT function setting up the color mode?

Please change the AUTO or B/W mode.

● TROUBLESHOOTING

English_31

specifications

※

SPECIFICATIONS

SCD-2080RN SCD-2080RP

Video

Imaging Device 1/3” Super HAD CCD

Total Pixels 811(H) x 508(V)

Effective Pixels 768(H) x 494(V) 752(H) x 582(V)

Scanning System 2:1 Interlace

Synchronization Internal

Frequency H : 15.734KHz V:59.94Hz H: 15.625KHz V: 50.Hz

Horizontal Resolution

Min. Illumination

S/N (Y Signal) 52dB (Weight On, AGC Off)

Video Output CVBS : 1.0Vp-p, 75Ω composite

Lens Type

Focal Length (Zoom Ratio)

Max. Aperture Ratio 1:1.2(Wide) ~ 2.8(Tele)

Angular Field of View H: 94.4˚(Wide) ~ 28˚(Tele) / V: 69.2˚(Wide) ~ 21˚(Tele)

Min. Object Distance 0.2m

Lens Type DC Auto Iris

Mount Type Board Type

Pan / Tilt

Pan Range

Tilt Range

Rotate Range

Operational

On Screen Display

Color : 600 TV lines, B/W : 700TV lines

Color : 0.15Lux (50IRE@F1.2), 0.0003Lux(Sens-up, x512)
B/W : 0Lux (LED on)

2.8 ~ 10mm (3.6x)

0° ~ 352°

0° ~ 73°

0° ~ 348°

Multi-language Support by Coaxial Cable
English, French, Spanish, Japanese,
Korean, Portuguese, Taiwanese

32_ specifi cations

II

795(H) x 596(V)

Multi-language Support by Coaxial Cable
English, French, German, Spanish,
Italian, Chinese, Czech, Danish, Polish,
Portuguese, Russian, Romanian,
Serbian, Swedish, Turkish

SCD-2080RN SCD-2080RP

SSDR On / Off (Level adjustable)

Backlight Compensation

BLC / HLC / OFF

Camera Title Off / On (Displayed 15 characters)

Day & Night Auto (ICR) / Color / B/W

Backlight Compensation

BLC / HLC / Off

Contrast Enhancement SSDR (Off / On)

Digital Noise Reduction SSNR3 ( Off/On )

Digital Image Stabilization

Off / On

Motion Detection Off / On (8 programmable zones)

Privacy Masking Off / On (12 programmable zones)

Sens-up (Frame Integration)

2x ~ 512x

Gain Control Off / Low / High

White Balance ATW / Outdoor / Indoor / Manual / AWC (1,700K° ~ 11,000K°)

Electronic Shutter Speed

1/60 ~ 1/120,000 sec 1/50 ~ 1/120,000 sec

Digital Zoom Off / On (1x ~ 16x)

Reverse H-Rev ( Off/On ), V-Rev ( Off/On )

Communication Coaxial Control ( SPC-300 Compatible )

Protocol Pelco-C (Coaxitron)

IR Distance 20m ( IR LED 12 EA )

Environmental

Operating Temperature
/ Humidity

-10°C ~ +50°C (+14°F ~ +122°F) / Less than 90% RH

Electrical

Input Voltage 12V DC ±10%

Power Consumption

Max. 3.5W

Mechanical

Color / Material

Ivory / Plastic ( Dome Cover : Smoked )

Dimension (ø×H) ø115.8x92.7mm

Weight 310g

※

This specifi cation can be changed without notice for performance improvement of product.

English_33

● SPECIFICATIONS

specifications

DIMENSION

Ø97mm

Ø115.8 mm

92.7mm

Ø90mm

34_ specifi cations

MEMO

MEMO

MEMO

MEMO

MEMO

SALES NETWORK

SAMSUNG TECHWIN CO., LTD.

Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400
TEL : [phone]~60, FAX : [phone]

SAMSUNG TECHWIN AMERICA Inc.

1480 Charles Willard St, Carson, CA 90746, UNITED STATES
Tol Free : [phone], FAX : [phone]
www.samsungcctvusa.com

www.samsungtechwin.com
www.samsungsecurity.com

SAMSUNG TECHWIN EUROPE LTD.

Samsung House, 1000 Hillswood Drive, Hillswood Business Park
Chertsey, Surrey, UNITED KINGDOM KT16 OPS

TEL : [phone], FAX : [phone]

P/NO. : Z680 6156202A