Samsung SCD-2021R, SCD-2021RN User Manual

SALES NETWORK

Jack

• SAMSUNG TECHWIN CO., LTD.

Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400
TEL : [phone]~60 FAX : [phone]

SAMSUNG TECHWIN AMERICA Inc.

•

100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660
Toll Free : [phone] Direct : [phone]
Fax : [phone]
www.samsungcctvusa.com

www.samsungtechwin.com
www.samsungsecurity.com

SAMSUNG TECHWIN EUROPE LTD.

•

Samsung House, 1000 Hillswood Drive, Hillswood Business Park
Chertsey, Surrey, UNITED KINGDOM KT16 OPS

[phone], FAX : [phone]

TEL :

P/NO. :

PT01-001997A

Weatherproof

User Manual

IR Camera

SCD-2021R

IF ANY UNUSUAL SMELLS OR SMOKE COME FROM THE UNIT, STOP USING THE PRODUCT. IN SUCH CASE,

8.

CAUTION

RISK OF ELECTRIC SHOCK.DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSISTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.

THIS EXCLAMATION POINT SYMBOL IS INTENDED TO ALERT THE USER TO THE PRESENCE OF
IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE
ACCOMPANYING THE APPLIANCE.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

•

TO PREVENT INJURY, THIS APPARATUS MUST BE SECURELY ATTACHED TO THE FLOOR/WALL IN ACCORDANCE

•

WITH THE INSTALLATION INSTRUCTIONS.

WARNING

BE SURE TO USE ONLY THE STANDARD ADAPTER THAT IS SPECIFIED IN THE SPECIFICATIO

1.
USING ANY OTHER ADAPTER COULD CAUSE FIRE, ELECTRICAL SHOCK, OR DAMAGE TO THE PRODUCT.

INCORRECTLY CONNECTING THE POWER SUPPLY OR REPLACING BATTERY MAY CAUSE EXPLOSION, FIRE, ELECTRIC

2.
SHOCK, OR DAMAGE TO THE PRODUCT.

DO NOT CONNECT MULTIPLE CAMERAS TO A SINGLE ADAPTER. EXCEEDING THE CAPACITY MAY CAUSE ABNORMAL HEAT

3.
GENERATION OR FIRE.

SECURELY PLUG THE POWER CORD INTO THE POWER RECEPTACLE. INSECURE CONNECTION MAY CAUSE FIRE.

4.

5.

WHEN INSTALLING THE CAMERA, FASTEN IT SECURELY AND FIRMLY. THE FALL OF CAMERA MAY CAUSE PERSONAL INJURY.

DO NOT PLACE CONDUCTIVE OBJECTS (E.G. SCREWDRIVERS, COINS, METAL PARTS, ETC.) OR CONTAINERS FILLED WITH WATER

6.
ON TOP OF THE CAMERA. DOING SO MAY CAUSE PERSONAL INJURY DUE TO FIRE, ELECTRIC SHOCK, OR FALLING OBJECTS.

DO NOT INSTA

7.

LL THE UNIT IN HUMID, DUSTY, OR SOOTY LOCATIONS. DOING SO MAY CAUSE FIRE OR ELECTRIC SHOCK.

Weatherproof IR Camera User Manual

2

N SHEET.

IMMEDIATELY DISCONNECT THE POWER SOURCE AND CONTACT THE SERVICE CENTER. CONTINUED USE IN
SUCH A CONDITION MAY CAUSE FIRE OR ELECTRIC SHOCK.

9.

IF THIS PRODUCT FAILS TO OPERATE NORMALLY, CONTACT THE NEAREST SERVICE CENTER. NEVER
DISASSEMBLE OR MODIFY THIS PRODUCT IN ANY WAY. (SAMSUNG IS NOT LIABLE FOR PROBLEMS CAUSED
BY UNAUTHORIZED MODIFICATIONS OR ATTEMPTED REPAIR.)

10.

WHEN CLEANING, DO NOT SPRAY WATER DIRECTLY ONTO PARTS OF THE PRODUCT. DOING SO MAY CAUSE FIRE

OR ELECTRIC SHOCK.

CAUTION

1.

DO NOT DROP OBJECTS ON THE PRODUCT OR APPLY STRONG BLOWS TO IT. KEEP AWAY FROM A LOCATION
SUBJECT TO EXCESSIVE VIBRATION OR MAGNETIC INTERFERENCE.

2.

DO NOT INSTALL IN A LOCATION SUBJECT TO HIGH TEMPERATURE (OVER 50°), LOW TEMPERATURE (BELOW

-10°), OR HIGH HUMIDITY. DOING SO MAY CAUSE FIRE OR ELECTRIC SHOCK.

3.

IF YOU WANT TO RELOCATE THE ALREADY INSTALLED PRODUCT, BE SURE TO TURN OFF THE POWER AND
THEN MOVE OR REINSTALL IT.

4.

REMOVE THE POWER PLUG FROM THE OUTLET WHEN THERE IS A LIGHTING STORM. NEGLECTING TO DO SO
MAY CAUSE FIRE OR DAMAGE TO THE PRODUCT.

5.

KEEP OUT OF DIRECT SUNLIGHT AND HEAT RADIATION SOURCES. IT MAY CAUSE FIRE.

6.

INSTALL IT IN A PLACE WITH GOOD VENTILATION.

7.

AVOID AIMING THE CAMERA DIRECTLY TOWARDS EXTREMELY BRIGHT OBJECTS SUCH AS SUN, AS THIS MAY
DAMAGE THE CMOS IMAGE SENSOR.

8.

APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS,
SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

9.

THE MAINS PLUG IS USED AS A DISCONNECT DEVICE AND SHALL STAY READILY OPERABLE AT ANY TIME.

10.

DO NOT EXPOSE THE CAMERA TO RADIOACTIVITY. RADIOACTIVITY EXPOSURE MAY DAMAGE THE CMOS.

FCC STATEMENT

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS :

1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND

2)

THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

Weatherproof IR Camera User Manual

3

Caution

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A
DIGITAL DEVICE, PURSUANT TO PART 15 OF FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE
REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED
IN A COMMERCIAL ENVIRONMENT.
THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND, IF NOT
INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL
AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED
TO CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.

IC COMPLIANCE NOTICE

THIS CLASS A DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN
INTERFERENCE.-CAUSING EQUIPMENT REGULATIONS OF ICES-003.

Correct Disposal of This Product

(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger,

headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of
waste and recycle them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of
where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

(Waste Electrical & Electronic Equipment)

Important Safety Instructions

Read these instructions.

1.
Keep these instructions.

2.
Heed all warnings.

3.
Follow all instructions.

4.
Do not use this apparatus near water.

5.
Clean only with dry cloth.

6.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

7.
Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifi ers) that produce heat.

8.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other.

9.
A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the
provided plug does not fi t into your outlet, consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from

10.

the apparatus.

Only use attachments/accessories specifi ed by the manufacturer.

11.
Use only with cart, stand, tripod, bracket, or table specifi ed by the manufacturer, or sold with the apparatus.

12.
Unplug this apparatus when a card is used. Use caution when moving the cart/ apparatus combination to avoid injury

13.

from tip-over.

Refer all servicing to qualifi ed service personnel. Servicing is required when the apparatus has been damaged in any way, such as

14.

powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatu

exposed to rain or moisture, does not operate normally, or has been dropped.

Correct disposal of batteries in this product

(Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of

with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate
that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are
not properly disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and
recycle them through your local, free battery return system.

Weatherproof IR Camera User Manual

4

s, the apparatus has been

Apparatus shall not be exposed to dripping or splashing and no objects
such as vases, shall be placed on the apparatus

Samsung Techwin cares for the environment at all product manufacturing
environment, and is taking a number of steps to provide
products.The Eco mark represents

and indicates

that the product satisfies the EU RoHS Directive.

Weatherproof IR Camera User Manual

Samsung Techwin’s will to create environment-friendly products,

5

customers with more environment-friendly

fi lled with liquids,

stages to preserve the

Component Names and Functions

Equipped with the IR LED and the illumination sensor, enables you to monitor at night as well

The camera is suitable for both internal and external use.

a

b

c

d

e

Name Description

a
b

c

IR LED

Lens

Illumination
Sensor

These infrared LED's are controlled by the illumination sensor.

Focal length of 3.6mm enables you to cover relatively longer range of monitoring.

Detects incoming light to control the IR LED.

Weatherproof IR Camera User Manual

6

as in daytime.

Video output

d

Power Input

e

Terminal

Accessories

Video signals are output through this port. Connect this port

Connect the power as specified for each model here.

Weatherproof

IR Camera

SCD-2021R

Quick Manual

G

N

U

S

S

A

M

Quick Manual

CAMERA

Screw 4EA

to the Video IN port of a monitor.

Plastic Anchor

Installation

precautions before installation

Ensure you read the following instructions before installing the camera:

ySelect an installation site (ceiling or wall) that can endure at least 5 times of the camera weight.
yStuck-in or peeled-off cables can cause damage to the product or a fire.

Weatherproof IR Camera User Manual

7

Installing Camera

Unit : mm

1.

Separate the LOCKING BEZEL by turnning anti-clockwise and separate the WALL BRACKET.

WALL BRACKET

CAMERA HOLDER

Unlocking direction
(Anti-clockwise)

LOCKING BEZEL

2.

Select a position where you want to install the camera, and use the screw bolts to mount the

Locking direction
(Clockwise)

wall bracket onto the wall or ceiling.

ȞȞȞȞ

3.

Adjust the camera lens and the CAMERA HOLDER to face the area to be monitored, and
then turn the LOCKING BEZEL clockwise.

Connecting to Power

• Connect the adapter to the power input connector as shown in the figure below.

Use a DC 12V.

(The Adapter is not provided with the Camera.)

Power Input Connector

Adapter (not provided)

For DC Power Type

Resistance of copper wire [at 20Cº(68ºF)]

Copper wire size (AWG)

Resistance ( Ω / m)

Voltage Drop (V/m)

• As the voltage drop according to the length of the cable in the above table, a camera may malfunction if
there is an excessively long cable run.

* Voltage for camera operation: DC 12V±10%
* Voltage drops in the above table are variable according to types of cable manufacturer.

#24(0.22mm2) #22(0.33mm2) #20(0.52mm2) #18(0.83mm2)

0.078 0.050 0.030 0.018

0.028 0.018 0.011 0.006

Connection to Monitor

Connect the VIDEO-OUT jack to the VIDEO-IN jack of monitor.

• As a connecting method varies according to instruments, refer to the manual supplied with the instrument.

• Connect the cable after power is turned off.

BNC

Monitor

Troubleshooting

If you have trouble operating your camera, refer to the following.
If the guidelines do not enable you to solve the problem, contact an authorized technician.

◾ The image on the screen is dim.

• Check if the lens are stained. If dirty, clean the lens with soft, clean cloth.

• The image is dimmer at night than daytime. If the focus is not right, adjust it at daytime.

◾ The contrast on the screen is too weak.

• Adjust the contrast feature of the monitor.

• If the camera is exposed under too strong light, change the camera position.

◾ The camera is not work properly, and the surface of the camera case is hot.

• Check that you have connected the camera to a proper power (DC 12V±10%).

Specification

Item

Video

Imaging Device

Active Pixels

Scanning System

Synchronization

Frequency

Horizontal Resolution

Min. Illumination

S/N Ratio

Lens Type

Focal Length

Max. Aperture Ratio

Operational

Digital Noise Reduction

Day & Night

Gain Control

White Balance

Shutter Mode

IR Distance

Weatherproof IR Camera User Manual

SCD-2021RN

1/3” CMOS

976 x 496

Interlace
Internal

H: 15,734Hz V: 59.94Hz

650 TV lines

0 LUX ( IR-LED )

50dB

3.6mm

2

Auto

( ICR )

Auto

Auto

Auto (3,200K° ~ 6,500K°)

Auto (Rolling Shutter)

20m

8

SCD-2021RP

H: 15,625Hz V: 50.00Hz

Weatherproof IR Camera User Manual

9

Specification

Item

Environmental

Operating Temperature
/ Humidity

Electrical

Input Voltage

Current

Mechanical

Dimension

Weight

The specification for this product may change without prior notice for product improvement.

※

SCD-2021RN SCD-2021RP

-10°C ~ +50°C (+14°F ~ +122°F) / 20% ~ 85% RH

12V DC

0.25A

Ø 93 x 78 mm

278g

Dimension

Weatherproof IR Camera User Manual

10

Weatherproof IR Camera User Manual

11

Weatherproof IR Camera User Manual

12

Weatherproof IR Camera User Manual

13

Weatherproof IR Camera User Manual

14