Samsung SCC-ZM395P, SCC-ZM395N, SCC-ZM395 User Manual

www.samsungsecurity.com

Color Camera Module

SPECIFICATIONS

MODEL SCC-ZM395

Version 1.1

DATE Nov.

CUSTOMER

SUPPLIER CUSTOMER

APPROVED

01. 2009

SAMSUNG ELECTRONICS Co., Ltd.

Maetan-3dong, Yeongtong-gu

416,

Tel : [phone], 3381, 3980, 3676

VSS Business Team

, Suwon-City, Gyeonggi-do, 443-742, Korea

- 1 -

Table of Contents

Revision History

-

Features

1.
Precautions

2.
Specifications

3.

Version 1.1

--------------------------------------------- 4

---------------------------------------- 5

Camera Module Spec.
Spectral Response Spec.
Hardware Spec.
Interface Circuit
Reliability Zoom Lens
Dimension
Packing Spec.

Function

4.

OSD Menu Structure
Function(OSD)

Communication

5.

-------------------------------------------------- 11

-------------------------------------------- 12

-------------------------------- 6

----------------------------- 7

------------------------------------------ 8

------------------------------------------ 9

---------------------------------- 10

----------------------------------- 13

------------------------------------------- 14

----------------------------------- 24

- 2 -

Revision History

-

Date Version Description

Version 1.1

'09. 09. 13
'09. 10. 01
'09. 11. 01

0.1

1.0

1.1

Establishment(for R&D sample)

Mass Production

Protocol changed and fixed

- 3 -

Features

1.

Version 1.1

1/4" 410

■

PowerZoomOptical
Minimum illumination
S/N Ratio

High Resolution:more than

■

This camera has realized high resolution of
full digital image processing,
technologies.

WDR(Wide Dynamic Range)

■

WDR extends the contrast range as it takesapicture of each of dark and bright areas
before compositing the two, which is useful if you takeapicture of windows insideabuilding.
Namely, it improves the picture quality of the outdoor scenery as well as indoor.
The contrast enhancer sustains the effective contrast range and expands Dynamic Range up
to

128

DNR(Digital Noise Reduction,2D+3D)

■

The DNR technology eliminates noise thus generatingadistinct and clear image.
This camera DNR function utilizes both an adaptive
of the image and an adaptive

K/470K Sony Ex-View-HAD Double Scan CCD

mm), Digital12x(0.1step)

50

Color)/600(BW) TV Lines

Color)/600(BW) TV lines using the top-notch

560(

filter reducing noise in the brightness

2D

52

x[NTSC] and

dB

160

39x (3.4~132.6

Lux(F1.6/WIDE,

1.2

Bit A/D serial signal processing and special algorithm

12

x[PAL]

Filter reducing noise caused by movement.

3D

560(

IRE, Color, Sens-Up Off)

DAYNIGHT(with DAYNIGHT Filter Assy)

■

This camera has the DayNight function which outputs the filter changing signal with
detecting the illumination condition.
DayNight operation feature an‘auto’mode which switches between day and night mode
automatically based upon the level of illumination on the scene.
And also, the COLOR mode operates in daytime conditions to provide optimum colors,
and B/W mode operates in night-time conditions to enhance the definition of the image.

CCVC(Camera Control Via Coaxial cable)

■

This isaremote control function that overlaps the coaxial cable(foratransfer of the video
signal) with the control signal. In installation or repair, this helps you control the
communication controller(optional) without additional cabling.※Coaxial Controller(Option)

Intelligent Video(Moved/Fixed)

■

This Camera provides built-in capability for video content analysis. Operational modes include
fixed mode(appear the object) and moved mode(disappear the object).

- 4 -

Precautions

2.

Avoid aiming the camera directly towards extremely bright objects such as sun,

■

as this may damage the CCD image sensor.

Do not use the camera in the extreme environments.

■

Extremely hot or cold place such as radiators, heat registers

­Operating condition

(

Close to generators of powerful electromagnetic radiation.

-

The place which is subject to light reflections, unstable lighting conditions,

-

strong vibration.

Remove dust or dirt on the surface of the CCD withablower.

■

-10℃~+50℃,

under

90%

humidity)

Version 1.1

Do not apply excessive voltage.(Operating Power Input:DC

■

The following phenomena that may appear in images are specific to CCD.

■

They do not indicate malfunctions.

White Flecks:The fleck especially tend to be seen when operation atahigh

-

environmental temp. or when you have raised the master gain and
use in sense-up function.

Vertical Smear:When an extremely bright object, such asastrong spotlight or

-

flashlight, is being shot, vertical tails may be produced on the screen,
or the image may be distorted.

Alias:When fine patterns, stripes, or lines are shot, they may appear or flicker.

-

Do not drop objects on the product or apply strong blows to it.

■

Do not install the unit in humid, dusty, or sooty locations.

■

Doingsomaycausefireorelectricshock.

9V ~ 15

V)

- 5 -

Specifications

3.

CAMERA Module Spec.

3-1.

Items Sub-items SCC-ZM395N SCC-ZM395P

CCD

Sync.

Performance

Device

SONY

PS CCD(ICX-448)

Total
Effective

Inter. H/V

15,734/59.94
LL H/V
Horizontal/Verical Resolution more than

Color mode

Sens Off

Minimum illumination

F1.6/Wide)

(

Sens x256

BW mode

Sens Off

Sens x256

ExView-HAD

1/4"

SONY

1/4"

PS CCD(ICX-449)

811 x 508 795 x 596
768 x 494 752 x 582

15,750/60

Hz

Hz

Color)/600(BW) TV Lines

560(

IRE

50

Lux

1.2
Lux

0.004

IRE

50

Lux

0.12
Lux

0.0004

25

0.6

0.002

25

0.06

0.0002

15,625/50
15,625/50

IRE

Lux

Lux

IRE

Lux

Lux

Version 1.1

ExView-HAD

Hz
Hz

IRE

15

Lux

0.36
Lux

0.001

IRE

15

Lux

0.036
Lux

0.0001

S/N Ratio

52

dB

focal length,Fnumber f=3.4~132.6mm, F1.6(Wide)/F3.7(Tele)

Lens

Drive Type Auto(DC)
M.O.D. Wide:
View Angle Tele:

1.56˚(H)x1.16˚(

0.2m ,
V), Wide:

OSD E/F/S/J/P,(E/K)
Privacy Zone

12ea(

Square)
Day&Night COLOR/BW/AUTO(with D/N Filter Assy)
Motion Detection Off/On(1ea)※Mask Area4ea
D-Zoom x1~x12(x0.1STEP)
High Speed Shutter

1/60(1/50) ~ 1/10
Flickerless Off/On
Sens Up(Low Shutter) x2~x256

BLC Off/On(Area Setting)

Functions

AGC Off/On(Max.Level Setting)
ALC(Auto Level Control) Auto(DC)/Manual(Level Control)
Line Lock Off/On(Phase Control)
Camera ID Off/On(Max.54ea/2Line)

White Balance

ATW1:

(

ATW1/ATW2/AWC/MANUAL

2,500 ~ 9,500°

K, ATW2:
DNR Off/On(Adaptive3D+2D)
DIS Off/On

PRESET Off/On

(256

WDR Off/On(x128/NTSC, x160/PAL)

Intelligent Video Yes(Moved/Fixed)
Etc. Function Detail, Reverse(H/V), Posi/Nega, PIP
Alarm Output

In/Output

Remote Control

UART(Txd/RXd,

Video Output VBS

Power

Power Input DC+9V
Power Consumption about Normal~Max.

Operating Temperature Absolute

ea(Open Collector)

1

Vp-p), CCVC(with SCX-RD100)

3.3

p-p

1.0V

(75

280~330mA(

:-10˚C~+50˚C
Operating Humidity Less than
Dimension, Weight

51.0(W)x 55.0(H)x 98.0(

Tele:

0.8 m

57.54˚(H)x 44.44˚(

E/F/G/S/I,(E/R/Po/T/Cz),

Chinese)

(

Ksec

2,000~10,000°

ea)

ohm Terminated)

~15V

DC12V)

90%

D) mm, about

230g

V)

K)

- 6 -

Spectral Response Spec.

3-2.

Version 1.1

CCD(ICX448AK/449AK)

- 7 -

Hardware Spec.

3-3.

Version 1.1

Rear View

1234

987654321

③

①

②

7
6

Zoom Lens

Tele/Wide Switch

CN207:I/O Connector-1

①

Pin NO Pin Name Description Normal Active I/O

1

2
3

4
5
6
7
8
9

RxD

TxD

GND Ground(for TxD/RxD)

DC IN Power input(DC

GND Ground(for DC IN)

VBS Composite Video Output

GND Ground(for VBS)

LPULSE Line Lock Control Clock

GND Ground(for VBS)

Read Data
CMOS
Send Data
CMOS

5V (

3.3V (

Low: Max

Low: Max

+9V ~ +15

Molex

V, high:min.3V)

0.8

V, high:min.2V)

0.1

V)

52207-0960

5
4
3
2
1

I

O

­I

-

O

­I

-

CN3:Connector for upgrading Camera Program

②

Pin NO

1
2
3
4
5
6
7

CN208:Connector for communication

③

Pin Name Description Normal Active I/O

FSPE JTEG Upgrade Mode Setting

DSPSCK JTEG Upgrade Clock

DSPSDO JTEG Upgrade Data Output

DSPSDI JTEG Upgrade Data Input

DSPSTB JTEG Upgrade Chip Selector

GND Board Ground

V+3.3V JTEG Jig Power Supply(Max

Yeonho Electronics,

(

※

0.2

12505

used for factory only)

used for factory only)

(

※

+3.3V 0 I

A)

WS-07A00

Pin NO Pin Name Description Normal Active I/O

1
2

3
4

V+5V Jig Power Supply(Max

TXD UART(Txd)
RXD UART(Rxd)

GND Board Ground

Yeonho Electronics,

0.2

A)

12505

WS-04A00

- 8 -

I

O

I
I

-

O

O
O

I

-

Interface Circuit

3-4.

①

Video Amp Block

②

Communication(TXD/RXD) Block:TTL Level

Version 1.1

③ Power Input Block

④ Lpulse (External sync) Block

DSP

3.3 Vp-p

EXT_SYN

※ NTSC: 60Hz ± 0.3Hz

PAL: 50Hz ± 0.3Hz

※Min.1msec

- 9 -

Reliability Zoom Lens

3-5.

①

Zoom Operation:more than

500,000

Version 1.1

times

Tele
side

Wide
side

Reset
Position

②Focus

Near
side

Reset
Position

∞

side

960pps (1-2phase)

1sec
1 moving
5 moving

Cycle

1

Operation:more than

Cycle

1

1sec holding

1sec

1sec holding

960pps (1-2phase)

2000step ↑

5sec holding

500,000

360pps Woblling 5 cycle

times

3step

3step

+1000step ↑

-1000step ↑

-400step ↑

+400step ↑

③

AUTO IRIS Operation:more than

OPEN

CLOSE

④

Day/Night Operaion:more than

Night

DAY

1.5sec 1 sec 1.5sec

30 sec

1 cycle

50,000

1 cycle

500,000

times

30 sec

times

1sec

- 10 -

Dimension

3-6.

Front Left Side

RearRight Side

Version 1.1

Top Side Bottom Side

- 11 -

Lens Effective Angle

Diagonal H : 20.9 mm
Horizontal H : 18.9576mm
Vertical H : 18.4620mm

Version 1.1

Packing Specifications

3-7.

Carton

(1

Zoom Module

BAG CAP

=10

ea)

Test

Report

MODEL NAME

CUSHION PANEL

(2 x 5)

LABEL

CARTON BOX

- 12 -

Function

4.

OSD MENU Structure

4-1.

MAIN MENU Description

CAMERA SET

INTELLIGENCE

PRIVACY ZONE

PRESET SET

OTHER SET

COMMUNICATION

SYSTEM INFO

LANGUAGE

CAMERA SET Description

CAMERA ID

IRIS

AGC(MOTION)

DNR

SHUTTER

SENS-UP

FLICKERLESS

DAY/NIGHT

WHITE BAL
FOCUS MODE
ZOOM SPEED

DISPLAY ZOOM

DIGITAL ZOOM

DETAIL

V-SYNC

AGC COLOR SUP

REVERSE

POSI/NEGA

PIP
DIS

Camera related functions and data.
Motion detection, and more.
Privacy related settings
Preset position and Preset ID
Configure for Factory Defaults, and more.
Communication set.
Displays the system information.
Selectalanguage on the OSD menu.

ON/OFF, Make the camera ID and set the place.
ALC/MANUAL Iris select. Setting the BLC and WDR function.
Setting the Max Gain under the low light.
Digital Noise Reduction fucntion
Set the shutter speed.(High shutter speed)
Set the shutter speed.(Slow shutter speed)
Shutter speed:NTSC(1/60
DayNight Mode(COLOR/BW/AUTO), Level set.
White Balance Mode(ATW1/ATW2/AWC/MANUAL)
Select the Focus Mode: MF, ONEAF, AF
ZOOM Speed set
ZOOM RATIO display
Digital Zoom ratio set(x1~x12:x0.1 step)
Aperture gain set
Internal/Linelock mode set
Color suppression amount at the AGC function
Horizontal/Vertical Reverse
Positive or Negative Video output set
Picture In Picture at Digital Zoom operation
Digital Image Stabilization set

→

1/100

sec), PAL

characters.(2 line)

54

(1/50→1/120

Version 1.1

sec)

INTELLIGENCE Description

MOTION

ADVANCED

MASK AREA

DISPLAY

SENSITIVITY

RESOLUTION

ALARM OUT

PRIVACY ZONE Description

PRIVACY SET

STYLE

PRESET Description

PRESET SET

OTHER SET Description

FACTORY DEFAULTS

OSD COLOR

COMMUNICATION Description

PROTOCOL, BAUD RATE, ADDRESS

SYSTEM INFO Description
SYSTEM INFO

LANGUAGE Description

LANGUAGE

Motion detection function
Advanced Motion detection function(Moved/Fixed)
Set the motion detection exception area
Motion Detection display ON/OFF
Motion Detection sensitivity
Motion Detection resolution
Alarm out set

Set the privacy zone
Set the privacy style(Mosaic, Color, etc)

Set the preset

Set the Factory default setting
OSD menu color set

Camera setting Information

select the language of OSD menu

(0~255)

Protocol set

- 13 -

Function(OSD)

4-2.

USING ICONS IN THE MENU

□

◆

If these icons appear in the left and right corner ofamenu item, you can use
the joystick to move to the previous or next menu.

EXIT)

◆

◆

◆

◆

◆

(

Exit the menu setting. Before you exits the menu setting, select SAVE to save your
settings, or select QUIT to cancel.

RET)

(

Return to the previous menu.

HOME)

(

Return to the main menu.

SAVE)

(

Used to save your settings of MASK AREA, PRIVACY ZONE and more. Once you save
your settings, they will remain even if you select QUIT in the menu.

DEL)

(

Used to delete your settings of MASK AREA, PRIVACY ZONE and more. Once you delete
your settings, they will not be restored even if you select QUIT in the menu.

Version 1.1

◆

This icon appears in the right ofamenu containing sub menu items.

MAIN MENU

□

CAMERA SET

◆

Configure Camera related functions and data.

INTELLIGENCE

◆

You can configure the settings of motion detection
and more.

PRIVACY ZONE

◆

You can configure the privacy related settings.

PRESET

◆

You can set the PRESET POSITION.

OTHER SET

◆

You can configure for Factory Defaults, and more.

COMMUNICATION

◆

Configure the settings regarding the UART communication.

SYSTEM INFO.

◆

Display the system information including the camera version and communication settings.

LANGUAGE

◆

Selectapreferred one from the supported languages.

- 14 -

Version 1.1

4-2-1.

●

CAMERA SETUP

CAMERA ID

You can configure the general settings of the module.
Select<MAIN MENU>
The Camera Setup menu appears.
Change the settings as necessary, or select an item
to check.

The CAMERA ID menu is used for you to assignaunique
name toacamera.
Use

▲▼▶◀

ENTER]. In the lower input box of the screen, the selected

[
character will be entered.

You can enter up to

­alphabets, numbers and special characters.

LOCATION:Specify the display position of the

­camera ID.

When done, press[ENTER]. The camera ID will be displayed
in the specified position.

to selectadesired character, then press

_

CAMERA SET>.

<

→

characters including

54

IRIS

●

The
to the camera.

ALC(Automatic Light Control)

◇

menu is used if you want to adjust the intensity of radiation incomin

IRIS

g

Adjust the open and close of the iris.

LEVEL:Select an overall brightness level.

­The LEVEL menu is used to adjust the overall brightness,
where
it.

BLC:With<BACKLIGHT> set to<BLC>, you can specify

­the BLC area. With AREA set to<USER>, you can specify
the position and size.

If you use an ordinary camera inascene with an intensive
back light, the object will be displayed dark on the monitor
affected by the back light. To solve this problem, you can
use the
the sharpness of the image in suchahigh contrast scene.

will increase the brightness and

“+”

Back Light Compensation) function to improve

BLC(

“.”

will decrease

- 15 -

MANUAL

◇

Version 1.1

WDR:If you set<BACKLIGHT> to<WDR>, you will see

-

menu where you can set the WDR options. specify the

a
shutter speed in WDR LEVEL, and the composition level in

WEIGHT>. Select OUTDOOR, or INDOOR in<WHITE

<
BAL>. The WDR feature provides an extension of the gain
range, which is useful, especially if you work on pictures
both indoors and outdoors from inside ofabuilding.
Namely, it improves the sharpness of the picture in outdoor
scenery as well as indoor.

Adjust the iris level manually.
The overall brightness target ofacamera will be set to ALC
level0,while the iris can be adjusted manually.

AGC(Auto Gain Control)/MOTION

●

With AGC active, if the signal strength falls below the
standard level, AGC will amplify the video signal to
automatically improve the sensitivity.
If<SENS-UP> is set to<OFF> or<FIX> mode, the

MOTION> menu will switch to<AGC>.

<
With the USER

submenu selected, press[ENTER] to

()
display the corresponding screen. In this mode, you can select
from VERY LOW to VERY HIGH in
wider choices to your convenience. With the FIX

levels, enabling deeper,

16

submenu

()
selected, press[ENTER] to display the corresponding screen.
In this mode, you can select an individualized mode in

16

levels, regardless of the brightness.

As long as the DAY/NIGHT menu is set to AUTO in

※

Camera Setup, the AGC menu is not available.
As long as FLICKERLESS is set to ON, the AGC mode

※

is not available.
If you set BACKLIGHT to WDR, the AGC fix mode is not

※

available.
If the DAY/NIGHT menu of the CAMERA SET is set to

※

AUTO, the AGC menu will be deactivated.
If FLICKERLESS is set to ON, the AGC FIX mode will

※

be disabled.

You can specifyalevel of AGC for controlling the camera motion. This is available only of
the SENSE UP menu is set to AUTO. Select F.FAST if you want to monitoravery fast
moving object inalow contrast scene, and S.SLOW if monitoringavery slow moving,
inanimate object in the same condition.

As long as DAY/NIGHT is set to<AUTO>, the<MOTION> menu is not available.

※

- 16 -

Version 1.1

DNR(Digital Noise Reduction)

●

Reduces the noise on the screen. This is especially useful foraseverely distorted screen.
You can set the level if you set DNR to USER.
This module use the motion adaptive DNR algorithm. This is mixed

2D & 3D

method data

depends on motion.

SHUTTER

●

The

SHUTTER

menu is used to set the fixed high-speed electronic shutter, auto high speed
electronic shutter and external high speed electronic shutter(EXT).
You can select one of7options from

1/100(

PAL:1/120) to

1/10K

for the fixed high speed

electronic shutter, which is mostly used for imagingafast moving object.

As long as SENSE UP is set to AUTO, FIXED/FLICKERLESS to ON/BACKLIGHT

※

to WDR, the SHUTTER menu is not available.

SENS-UP(Low Speed shutter)

●

Automatically detects the ambient level of darkness in the dark or low contrast scene to
extend the accumulated time, keeping the image bright and sharp; It can be also used as
FIX mode.

If the SHUTTER menu is set to fixed electronic shutter mode, the SENSE UP menu

※

will not be available.
If FLICKERLESS is set to ON, or BACKLIGHT to WDR, the FIX mode of the SENSE
UP menu is not available.

FLICKERLESS

●

If set to ON, the shutter speed will be fixed to

PAL:1/120) second. This will prevent

1/100(
possible screen distortion due toamismatch between the vertical sync frequency and the
blinking frequency of the lighting.

If SHUTTER is set to FIX, SENSE UP to FIX, and AGC to FIX, the<FLICKERLESS>

※

menu is not available.

DIS(Digital Image Stabilization)

●

Digital Image Stabilization will set the anti-shake compensation.

If you set DIS to ON, the compensation area will be enlarged as set in the digital

※

zoom factor.
If you set the digital zoom factor to greater than the enlarged zoom factor for the
compensation, the DIS function will be deactivated.

DAY/NIGHT

●

DAY

◇

Fixed to DAY mode, regardless of the scene.

NIGHT

◇

Fixed to NIGHT mode, regardless of the scene.
If BURST is set to<ON>, the burst signal will be output
long with the black and white composite video signal.

AUTO

◇

According to the luminance, this will switch DAY to NIGHT mode, or vice versa.

If you use an infrared light source while in AUTO mode, this may causeafailure in

※

AUTO SWITCH or AUTO FOCUS.

- 17 -

Version 1.1

BURST:If set to<OFF>,theburstsignalwillnotbe

­output in NIGHT mode.

DAY→NIGHT BRIGHTNESS:Specify the brightness level

­switching from COLOR to BW filter. Adjusting from HIGH
toLOWwillcausetoswitchthefilterinadarker screen.

DAY→NIGHT DWELL TIME:Time required to determine

­the filter switch.

NIGHT→DAY BRIGHTNESS:Specify the brightness level

­switching from BW to COLOR filter. Adjusting from HIGH
toLOWwillcausetoswitchthefilterinadarker screen.

NIGHT→DAY DWELL TIME:Time required to determine

­the filter switch.

MASK AREA:If there existsabright spot light source in

-

night scene, you can specify the size and position as

a
needed. This will prevent an error in switching filter, or
failure to determine the filter switch inanight scene
whereabright spot light source exists.
Any excessively bright area inanight scene will be
masked.

WHITE BAL

●

You can specify MASK1and2simultaneously.

※

If<BACKLIGHT> is set to<BLC>, the MASK AREA

※

function is not available.

If you need to adjust the color according to the ambient
illumination, you can use the<WHITE BAL> function.

DAY:You can set the RED, and BLUE value in DAY

­mode. The screen will be displayed in colors according
to your settings.
You can set the R-GAIN, and B-GAIN value only in

AWC> mode.

<

NIGHT:You can set the<WHITE BAL> according to the

­ambient illumination. If NIGHT mode is set to<OFF>,
the<WHITE BAL> will operate inamode specified in
DAY mode at all times; otherwise, the screen will switch
toamode specified in

DAY/NIGHT>.

<
You can set the RED, BLUE and BRIGHTNESS value in
DAY mode. The screen will be displayed in colors
according to your settings.

- 18 -

Version 1.1

According to the specified recording mode, select

WHITE BAL> mode with

a<

necessary options.

ATW1,2:The camera can automatically adjust the color temperature in real time,

­according to the ambient conditions.

Color temperature range ATW1:

(

AWC:Pressing[ENTER] onadesired item will perform ATW once.

-

You can set the R-GAIN/B-GAIN value.

※

- 3200K :

- 5600K :

RED:Adjust the strength of the red color.

-

BLUE:Adjust the strength of the blue color.

-

R-GAIN/B-GAIN:Specify the current color temperature manually.(only in AWC state)

-

BRIGHTNESS:Specifyabrightness level switching from DAY mode to NIGHT mode set.

-

FOCUS MODE

●

Set the color temperature to
Set the color temperature to

2500K ~ 9500

K.

3200

K.

5600

K, ATW2

: 2000K ~ 10000

You can selectafocus mode according to the angle that
you adjusted for camera recording.

K)

AF:This will monitor the screen continuously to focus

­automatically. If you adjust the focus manually, that will
operate the same as in<MF>. This will also restore
focus after the operation of zoom.

ONEAF:Restores focus after the operation of zoom,

-

and operates the same as in<MF> unless the operation
of zoom is executed.

MF:You can adjust the focus manually.

-

While you are working on the following objects,<AF> may not work properly.

※

If this is the case, use<MF> instead.

Very bright object, or dominant object inadark scene

­Object against the rear side ofamoist or dirty glass

-

scene where nearby and distant objects co-exist

-A
White wall or single-colored object

­Venetian blinds and other horizontally striped objects

-

ZOOM SPEED

●

You can adjust the zoom operation speed.
The zoom speed is the fastest when the value is

DISPLAY ZOOM

●

4.

You can set to display the zoom status on the screen.
It will disappear in about3seconds if the zoom factor has no further change.

DIGITAL ZOOM

●

You can set the maximum allowable digital zoom ratio.
Digital Zoom will start operation after it is zoomed in to the maximum optical ratio of
x39. If you set DIGITAL ZOOM to x12, you can takeashot at up to x468

(39

When you set DISPLAY ZOOM as on, you may see zoom value on the screen.

- 19 -

x12).

DETAIL

●

Controls the horizontal or vertical distinction.

V-SYNC

●

Select the vertical sync mode for INT or LINE.
IfyouselectINT,thecamerawilluse the internal synchronization.
If selecting LINE, the camera will use the external power source frequency for the
synchronization. The LL-PHASE can be adjusted as appropriate.

No input the L-Pulse signal will fix V-SYNC to INT, which can not be changed.

※

AGC COLOR SUP(AGC Color Suppression)

●

Adjust the color scheme according to

REVERSE

●

Mirrors video signals horizontally, vertically, or both.

operation value.

AGC

Version 1.1

POSI/NEGA

●

Output as it is or mirror the video brightness signal.

PIP(Picture In Picture)

●

Displaysasub image together with the main image on the same screen using the Picture
In Picture function.

If more than one PRIVACY ZONE is specified, and PRIVACY SET to<ON>,

※

the PIP function is not available.
As long as SENSE UP is set to FIXED, PIP menu is not available.
According to the luminance, PIP will disappear if the SENSE UP menu is set to AUTO.

4-2-2.

INTELLIGENCE SET UP

:+,-

You can set the motion detection and tracking in the
INTELLIGENCE menu.

In following situations, motion detection and t racking

※

function may not work properly.

When there is sudden changes of brightness

­When the device moves

­Whenacertain object’smovement fills most of the

-

framing area

When there is difficulties in distinguishing the moving

-

object and background.

MOTION

●

TRACKING:Detects and tracksamoving object.

­DETECTION:Detectsamoving object.

-

ADVANCED

●

If an object on the screen suddenly disappears or an object comes out of nowhere and
stays foracertain time, the area will be displayed.

In following situations, FIXED/MOVED detection may not work properly.

※

When multiple motions continue arbitrarily.

-

When the object that is fixed continues to move in the same position.

-

Whenanewly appearing object conceals another object that is moving.

-

- 20 -

Version 1.1

MASK AREA

●

Selectthenumberoftheareatobemaskedthatwillbe
excluded from motion detection.
Select the mask number and set the mask size and its
coverage.

DISPLAY:ON, OFF

●

With the DISPLAY option set to ON,amotion function will be displayed on the screen, if
detected.

SENSITIVITY

●

RESOLUTION

●

ALARM OUT

●

4-2-3.

:1~7

Set the sensitivity of the motion detection.

:1~5

If setting it to high, the camera can detect evenatrivial movement of the target.

When selected<ON>, it outputs alarm signal when the motion
is detected and onadetection of configured advanced
function.

PRIVACY ZONE SETUP

You can set up to
privacy of the subject when recording.

privacy zones that will be hided for

12

Select<MAIN MENU>-<PRIVACY ZONE>.
Select the number of the zone and press[ENTER].
The Zone setup screen appears.
Select the<ZOOM> and press[ENTER].
Using

▲▼

Select the<PIXEL LEVEL>.
Select the pixel level for the SIZE and LOCATION settings.
Select the<SIZE> and press[ENTER].
Using

▲▼

Select the<LOCATION> and press[ENTER].
Using

▲▼

Save the changes and move to the previous screen and
select the<STYLE>.
Select the<COLOR> and pickadesired color.

to locate zoom position.

_+

set the size of the privacy zone.

_+,

set the position of the privacy zone.

_+,

- 21 -

Version 1.1

Setting one or more privacy zone and enabling privacy function will disable

※

the PIP function.
For better privacy protection, make your privacy zone bigger than the required,
bigger by about
Video portion of mosaic pattern or colored by the privacy zone setup is not recoverable.

30%.

4-2-4.

4-2-5.

PRESET SET

OTHER SET

This function provides preset camera settings such as zoom
and focus so to enable quicker and easier accessing and
monitoring, which supports up to

Select<MAIN MENU>-<PRESET>.
Select the preset number.
Select<POSITION>.
Set<PRESET ID> to<ON> and enter the name.
For entering the name, refer to“CAMERA ID

FACTORY DEFAULTS

●

All the settings will be restored to the factory default.
However, the settings of PROTOCOL, BAUD RATE,
ADDRESS and LANGUAGE will not be restored to the
default.

212

presets.

”.

4-2-6.

COMMUNICATION

OSD COLOR:BW, R/G/B

●

You can set the OSD(On-screen Display) color to COLOR
or B/W.

The COMMUNICATION menu is used to configure the settings
regarding UART communications. Use the connector of the
camera to connect to UART. Use the
specify the protocol and baud rate for communications.

PROTOCOL

●

SAMSUNG, PELCO-P/D, VICON, PANASONIC, PHILIPS,
ERNA, DIAMOND, VCLTP, KALATEL

BAUD RATE : 2400, 4800, 9600, 19200, 38400

●

The baud rate differs, depending on the specified protocol.

※

ADDRESS :0~255

●

- 22 -

▲▼◀▶

switch to

Version 1.1

4-2-7.

4-2-8.

SYSTEM INFORMATION

You can view the system information including the protocol,
address, baud rate, serial number, camera version, and
EEPROM version.

LANGUAGE SET UP

The camera supports5different languages. Selectapreferred
language.

- 23 -

Communication

5.

Connection

1)

Data Communication:Start-Stop Synchronized serial interface

◆

Data length

◆

Stop bit

◆

Parity

◆

Baudrate

◆

Communication Protocol

2)

All communication data consist of nine bytes.

◆

Communication data start with A0(h).

◆

The format of the communication data is shown below.

◆

bit data

:8

bit

:1

None

:
: 4800, 9600, 19200, 38400

9

bps※default value

Byte Fixed

:9600

Version 1.1

bps

Byte1 Byte

Start Code

A0H(1)

Data Byte Type Contents Remarks

Byte

1

Byte

2

Byte

3

Byte

4

Byte

5

Byte

6

Byte

7

Byte

8

Byte

9

Checksum calculating example

※

Example of Pan(Left) command with motor speed20H.

In this example, camera's address is01H.

Byte

2

00H 01H 01H 00H 01H 20H 00H

SumfromByte2toByte8
FFFFH

∴

Check Sum:DCH

∴

Address

Start Code A0H Data Packet Starting Point

Sender Address Sender address

Target Address Target address

Command

Check Sum LSB* of(FFFFH

Byte

-23H=

2

Sender

(1)

3

Byte

FFDCH;LSB of FFDCH=DCH

Byte

Target

Address

4

=23H

3

(1)

Byte

Byte

4~8

Command

SumfromByte2toByte8))

-(

5

Byte

6

Byte

(5)

7

Byte

Byte

Check sum

8

Byte

9

(1)

9

DCH

Ack. Format

◆

Samsung communication utilizes Ack. codes. When controller sendsacommand,
the camera sends back an Ack. This is our basic procedure to make sure that the

communication and the camera function are properly executed.

- 24 -

Byte Fixed

9

Version 1.1

Byte

A0H(1)

1

Byte

Sender

Address

2

(1)

Byte

Target

Address

3

(1)

Byte

FFH(1)

Byte

4

*

①

Byte

5

*

②

Byte

6

*

③

Byte

7

Ack. Return Code of Camera

ACK is applicable only in case that Byte4 of the command is

03H.

Byte5, Byte6 and Byte7 of theAck. data means as follows.

Byte5 of theAck. data indicates whether the camera received command successfully.

*

①

00H :
01H :

Byte6 of theAck. data indicates the mode in which camera is working.

*

②

OK
Error(Request Re-transmission)

Camera Mode Byte6 Byte7

Manual

Menu

00H 00H
01H

Don't care

④

Byte

8

*

9

FFH

- 25 -

◆ Camera Control Command

Command Byte4 Byte5 Byte6 Byte7 Byte8 Items Ack

PROTOCOL

COMMUNICA
TION

KEY(SWITCH)

SYSTEM

COMMAND

OSD

MAIN MENU)

(

CAMERA
ID

BAUDRATE
ADDRESS

When you change the protocol, maybe the baudrate and the address will be changed automatically

*

because some protocol is not support some baudrate and address
ENTER
UP
DOWN
LEFT
RIGHT
RESET
FACTORY DEFAULT
REQUEST MODEL
NAME
INFORMATION
DISPLAY
OPERATION SAVE
OPERATION CANCEL
ON
OFF
OSD COLOR
CAMERA ID
OPERATION

ID SET

00H A 05H F 0

01H B 06H G 0

02H C 07H H 0

03H D 08H I 0

04H E 09H J 0

Version 1.1

H: SAMSUNG

00

H: PANASONIC

02

02H 19H 03H 00H **H

02H 19H 00H 00H **H
02H 19H 01H 00H **H 00

03H 18H
03H 03H
03H 09H
03H 05H
03H 07H
02H 00H 00H 00H 00H
02H 01H 00H 00H 00H

FCH

02H 1
02H 22H 00H 00H 00H O

02H 23H 00H 00H 00H O
03H 17H 01H 00H
03H 17H 00H 00H
02H 1

02H 0

02H 0

AH
BH
CH
DH
EH

00H 00H 00H

K0FHP 14H U 19H Z 1
L 10H Q 15H V 1
M 11H R 16H W 1
N 12H S 17H X 1
O 13H T 18H Y 1

FFH
FFH
FFH
FFH
FFH

CH

BH
AH

AH

00H
00H
00H
00H
00H

00H 00H **H 00

00H 00H **H 00
00H 00H **H 00

01H *1H *2H

String Table

*

FFH
FFH
FFH
FFH
FFH

FCH A0 FD00FC

FFH
FFH

H: PELCO-P

04

H: ERNA

06

H: VCLTP

08
00H:4800
02H:19200

H~FFH:

.

Camera reboot
Return to factory default setting

H: OFF,01H: ON

H: BW,01H: R,02H: G,03H:
H: OFF,01H: ON

*1H (C

01

*2H (

AH

01FH5 24H

BH

1 20H 6 25H : 2

CH

2 21H 7 26H ? 2

DH

3 22H 8 27H - 2

bps,

bps,03H:

0~255 O

00 00 00

AMERA ID Sequence)

H~36H:

0~54

String):note the below table

EH

4 23H 9 28H +

H: VICON

01

H: PHILIPS

03

H: KALATEL

05

H: DIAMOND

07

H: PELCO-D

09

01H:9600

38400

FC

space

bps

bps

0A O

BO

29H *

AH
BH
CH

O

O

O
O
O
O
O
O
O

O

O
O

O

O

(
)
/

IRIS

ID LOCATION
ALC(Auto Iris)

ALC LEVEL
BLC OFF
BLC ON

BLC ON
AREA set

BLC ON
AREA DISPLAY ON

BLC ON USER
SIZE&LOCATION

02H 0
02H 02H 00H 00H 00H

02H 02H 00H 02H **H 00
02H 02H 03H 00H 00H
02H 02H 03H 00H 01H

02H 02H 04H 00H **H

02H 02H 06H 00H **H 00

02H 02H 04H *1H *2H

AH

02H 00H **H

00
02
Iris Auto

Back Light Compensation Off
Back Light Compensation On
00
02
04

*1H

*2H

- 26 -

H: UP
H: LEFT

H~40H:

H: USER
H: TOP
H: RIGHT

H: OFF

SIZE change

01H:

LOCATION change

02H:

height increase/move up

00H:

height decrease/move down

01H:

width decrease/move left

02H:

width increase/move right

03H:

H: DOWN

01

H: RIGHT

03

-32~+32 O

H: BOTTOM

01

H: LEFT

03

H: CENTER

05

H: ON

01

O
O

O
O

O

O

O

Version 1.1

AGC or
MOTION

DNR

SHUTTER

BLC ON USER AREA
Horizontal Start Point
BLC ON USER AREA
Horizontal End Point
BLC ON USER AREA
Vertical Start Point
BLC ON USER AREA
Vertical End Point

The BLC USER area minimumlength is

*

If you set the area is smaller than the minimum area, it only can display the minimum area

WDR ON
WDR WEIGHT

WDR LEVEL
WDR WHITE BAL
MANUAL IRIS
MANUAL LEVEL
IRIS OPEN
IRIS CLOSE
IRIS STOP

AGC LEVEL(MAX.)

AGC USER LEVEL
AGC FIX LEVEL

MOTION

When SENS UP is OFF/FIX, AGC can be used and when SENS UP is AUTO, MOTION can be used.

*

AGC/MOTION function is disabled when COLOR/BW mode is AUTO.

*

This function cannot be used at WDR ON and AGC F IX,

*
DNR
DNR USER LEVEL

OFF~ON

This function is disabled when FLICKERLESS is ON or SENS-UP is not OFF or WDR is ON.

*

02H 02H 07H *

02H 02H 08H *

02H 02H 09H *

02H 02H 0

02H 02H 03H 00H 02H O

This function can't be enabled at IRIS manual.

*

02H 02H 05H 02H **H 00
02H 02H 05H 03H **H 00

02H 02H 05H 01H **H 00
02H 02H 01H 00H 00H
02H 02H 01H 01H **H 00
01H 08H 00H 00H 00H X
01H 10H 00H 00H 00H X
01H 00H 00H 00H 00H X

02H 05H 00H 00H **H

02H 05H 00H 01H **H 01
02H 05H 00H 02H **H 01

02H 05H 01H 00H **H

02H 0
02H 0

02H 04H 00H 00H **H

BH
BH

AH

121 (0

00H 00H **H
01H 00H **H 01

Hi*Low0x00H~0x277H

Hi*Low0x79H~0x2B7H

Hi*Low0x00H~0xIDIH

Hi*Low0x5DH~0x211H

*

x79);minimum width is

Iris Manual

00
02
04
06

00
02
04

00
03

00
02H:1/250, 03H:1/500, 04H:1/1000,
05H:1/2000, 06H:1/4000, 07H:1/10K

94 (0

H: LOW,01H: MID,02H: HIGH
H~12H:

H: INDOOR,01H: OUTDOOR

H~40H:

H: OFF,
H: LOW,
H: HIGH,
H: USER,
H~10H:
H~10H:
H: S.SLOW,01H: SLOW,
H: NORM,
H: F.FAST

H: OFF,01H: LOW,02H: MID
H: HIGH,04H: USER
H~10H:
H: OFF,01H:

-9~+9 O

-32~+32 O

1~16 O
1~16 O

1~16 O

x5D)

.

H: VERY LOW

01

H: MID

03

H: VERY HIGH

05

H: FIX

07

H: FAST

03

1/100(1/120),

.

O

O

O

O

O

O
O

O

O

O

O

SENS-UP

OFF

00H

AUTO X2

01H

AUTO X4

02H

AUTO X6

03H

AUTO X8

04H

AUTO X12

05H

AUTO X16

06H

AUTO X24

OFF~AUTO X256

FIX X256

~

This function is disabled when SHUTTER is not OFF

*

SENS-UP FIX mode is disabled when WDR is ON, or SHUTTER is not OFF or FLICKERLESS is ON

*

02H 03H 00H 00H **H

07H

AUTO X32

08H

AUTO X48

09H

AH AUTO X641AH FIX X128

0

BH AUTO X961BH FIX X256

0

CH AUTO X1281CH

0

DH AUTO X2561DH

0

EH

0

FH FIX X2

0

10H
11H
12H
13H
14H
15H
16H
17H
18H
19H

1EH­1FH-

FIX X4
FIX X6
FIX X8
FIX X12
FIX X16
FIX X24
FIX X32
FIX X48
FIX X64
FIX X96

-

- 27 -

O

Version 1.1

FLICKER­LESS

DIS

DAY/NIGHT

FLICKERLESS

This function is disabled when SHUTTER is FIX or SENS-UP is FIX or AGC is FIX.

*
DIS

When zoom ratio is more than

*
DISPLAY
BURST

DAY/NIGHT AUTO
DAY→NIGHT
BRIGHTNESS
DAY/NIGHT AUTO
DAY→NIGHT
DWELL TIME
DAY/NIGHT AUTO
NIGHT→DAY
BRIGHTNESS
DAY/NIGHT AUTO
NIGHT→DAY
DWELL TIME

DAY/NIGHT AUTO
MASK AREA
OPERATION

DAY/NIGHT AUTO
MASK AREA
MENU DISPLAY

DAY/NIGHT AUTO

ASK AREA NO.

M
SIZE&LOCATION

DAY/NIGHT AUTO

ASK AREA NO.

M
SIZE&LOCATION

ASK AREA

M
Horizontal Start Point

ASK AREA

M
Horizontal End Point

ASK AREA

M
Vertical Start Point

ASK AREA

M
Vertical End Point

ASK AREA

M
Horizontal Start Point

ASK AREA

M
Horizontal End Point

ASK AREA

M
Vertical Start Point

ASK AREA

M
Vertical End Point

1

1

1

1

2

2

2

2

02H 0

02H 15H 00H 00H **H 00

02H 06H 00H 00H **H
02H 06H 01H 00H **H 00

02H 06H 02H 00H **H 00

02H 06H 02H 01H **H

02H 06H 02H 02H **H 00

02H 06H 02H 03H **H

02H 06H 03H *1H *2H

02H 06H 06H *1H *2H

2

02H 06H 04H *1H *2H

1

02H 06H 05H *1H *2H

02H 06H 07H *

02H 06H 08H *

02H 06H 09H *

02H 06H 0

02H 06H 17H *

02H 06H 18H *

02H 06H 19H *

02H 06H 1

CH

00H 00H **H 00

including DZOOM, DIS function becomes automatically OFF.

45x

Hi*Low0x00H~0x278H

Hi*Low0x78H~0x2B7H

Hi*Low0x00H~0x1D1H

AH

AH

Hi*Low0x5DH~0x211H

*

Hi*Low0x00H~0x278H

Hi*Low0x78H~0x2B7H

Hi*Low0x00H~0x1D1H

Hi*Low0x5DH~0x211H

*

H:OFF,01H:ON

H:OFF,01H:ON

H: DAY,01H: NIGHT

00

H: AUTO

02

H:OFF,01H:ON

H:LOW,01H:MID,02H:HIGH

sec,01H:3sec,02H:5sec

00H:2

sec,04H:15sec,05H:20sec

03H:10

sec,07H:30sec

06H:25

H: LOW,

sec,01H:3sec,02H:5sec

00H:2

sec,04H:15sec,05H:20sec

03H:10

sec,07H:30sec

06H:25
**1H

H: AREA1,01H: AREA2

00

*2H

H: OFF,01H: ON

00

**1H

H: AREA1,01H: AREA2

00

*2H

H: OFF,01H: ON

00

*1H

H: SIZE change

01

LOCATIONchange

02H:

*2H

height increase/move up

00H:

height decrease/move Down

01H:

width decrease/move left

02H:

width increase/move right

03H:

*1H

H: SIZE change

01

LOCATIONchange

02H:

*2H

height increase/move up

00H:

height decrease/move Down

01H:

width decrease/move left

02H:

width increase/move right

03H:

H: MID,02H: HIGH

01

O

O

O
O

O

O

O

O

O

O

O

O

O

O

O

O

O

O

O

O

- 28 -

WHITE
BALANCE

FOCUS

ZOOM

DIGITAL
ZOOM

Version 1.1

When BACKLIGHT is BLC, the MASK AREA is disable

*

The Mask area only can be used in AUTO mode

*

The area maximum length is

*

If you set the area is larger than the maximum area, it only can display the maximum area

Theareaminimumlength is

*

If you set the area is smaller than the minimum area, it only can display the minimum area
DAY/NIGHT state
select

DAY MODE
DAY RED

DAY BLUE
DAY AWC R-GAIN
DAY AWC B-GAIN
DAY AWC shot

NIGHT MODE
NIGHT BRIGHTNESS

NIGHT RED
NIGHT BLUE
NIGHT AWC R-GAIN
NIGHT AWC B-GAIN
NIGHT AWC shot

When AGC is OFF or FIX cannot select NIGHT mode

*

After sending the DAY/NIGHT state selection command, the screen of camera changes according to

*

the selected state that do not change according to the current state.

When sending the save command, the screen changes depending on the current state.
FOCUS
FOCUS LIMIT

OCUS FAR

F
FOCUS NEAR

OCUS STOP

F
FOCUS DIRECT

FOCUS STOP command must be used after sending FOCUS NEAR and FOCUS FA R command

*
ZOOM SPEED
ZOOM TELE
ZOOM WIDE
ZOOM STOP
ZOOM DIRECT
ZOOM RATIO
DISPLAY

ZOOM STOP command must be used after sending ZOOM WIDE and ZOOM TELE command

*

DIGITAL ZOOM
RATIO(MAX.)

DIGITAL ZOOM
DIRECT

This function is disabled when D-ZOOM OFF

*

This value is depending on the D-ZOOM ratio, D-ZOOM ratio of the max DZOOM value is different

If DZOOM DIRECT command can be sent, the zoom operates optical zoom max. value automatically

*

and operates to the DZOOM.

120 (0

02H 07H 10H 00H **H

02H 07H 00H 00H **H
02H 07H 01H 00H **H 00

02H 07H 01H 01H **H 00
02H 07H 02H **
02H 07H 03H **
02H 07H 04H 00H 01H O

02H 07H 05H 00H **H
02H 07H 0

02H 07H 06H 00H **H 00
02H 07H 06H 01H **H 00
02H 07H 07H **
02H 07H 08H **
02H 07H 09H 00H 01H O

02H 08H 00H 00H **H 00
02H 08H 01H 00H **H 00H:5
01H 01H 00H 00H 00H
01H 02H 00H 00H 00H
01H 03H 00H 00H 00H
80H 00H 00H **

02H 1
01H 20H 00H 00H 00H
01H 40H 00H 00H 00H
01H 30H 00H 00H 00H
10H 00 00 **

02H 1

02H 0

64H 00H 00H 00H *H

xEF);maximum width is

239 ( 0

x78);minimum width is

AH

DH

00H 00H **H 0

DH

01H 00H **H 00

EH

01H 00H **H

Hi

**

Hi

**

00H **H 00

Hi

**

Hi

**

Hi

**

Hi

**

.

xBC)

188 (0

x5D)

94 (0

H: Day

00

H: Night

01

H: ATW1,01H: ATW2,02H: AWC

00
03H:3200K,04H:5600K

H~40H:
H~40H:

Low

000

Low

000

H: ATW1,01H: ATW2,02H: AWC

00
03H:3200K,04H:5600K,05

H: LOW,
H~40H:
H~40H:

Low

000

Low

000

H:ONEAF,01H:AF,02H:MF

FOCUS FAR
FOCUS NEAR
FOCUS STOP

Low0x7526~0x8900

H~03H:
ZOOM TELE
ZOOM WIDE
ZOOM STOP

Low Value:0x80E6~0x9B00

H: OFF,

DZOOMDATA_OFF(x1)
DZOOMDATA_x2
DZOOMDATA_x3
DZOOMDATA_x4
DZOOMDATA_x5
DZOOMDATA_x6
DZOOMDATA_x7
DZOOMDATA_x8
DZOOMDATA_x9
DZOOMDATA_x10
DZOOMDATA_x11
DZOOMDATA_x12

DZOOM value0x00H~0xEBH

-32~+32 O

-32~+32 O
H~3FFH:
H~3FFH:

H~3FFH:
H~3FFH:

0~1023 O
0~1023 O

H: MID,02H: HIGH

01

-32~+32 O

-32~+32 O

0~1023 O
0~1023 O

cm,01H:20cm

1~4 O

H: ON

01

01H
02H
03H
04H
05H
06H
07H
08H

09H

AH

0

BH

0

H: OFF

.

00H

O

O

O
O

O
O
X
X
O
X

.

X
X
O
X

O

O

X

.

- 29 -

Version 1.1

DETAIL DETAIL

V-SYNC

V-SYNC

AGC COLOR
REVERSE REVERSE

POSI/NEGA POSI/NEGA
PIP
IMAGE STILL IMAGE STILL

LENS INITIALIZATION

INTELLI­GENCE

PRIVACY
MASK

V-SYNC PHASE

When power is DC, LINE LOCK is disabled automatically.

*
AGC COLOR
SUPPRESSION

PIP

This function is disabled when privacy zone is ON, and this PIP disappears when SENS-UP is operated.

*

MOTION DETECTION
MOTION ADVANCED

MOTION DISPLAY ON
MOTION SENSITIVITY
RESOLUTION

ALARM OUT

MOTION
MASK AREA
OPERATION

MOTION
MASK AREA
MENU(All) DISPLAY

MOTION
MASK AREA
MENU Select

MOTION

ASK AREA

M
SIZE

MOTION

ASK AREA

M
LOCATION

MOTION ADVANCED is disabled when MOTION DETECTION is DETECTION.

*
PRIVACY SET
STYLE
STYLE COLOR
Y-LEVEL
STYLE COLOR RED
STYLE COLOR BLUE
PIXEL LEVEL
PRIVACY
MASK AREA
MENU DISPLAY

02H 0
02H 10H 00H 00H **H 00

02H 10H 01H **

02H 11H 00H 00H **H 00
02H 12H 00H 00H **H 00

02H 13H 00H 00H **H 00
02H 14H 00H 00H **H 00

02H 26H 01H 00H **H 00H:
02H 24H 00H 00H 00H O

02H 16H 00H 00H **H
02H 16H 01H 00H **H 00

02H 16H 03H 00H **H 00
02H 16H 04H 00H **H 00
02H 16H 05H 00H **H 00

02H 16H 06H *1H *2H

02H 16H 02H *1H *2H

02H 16H 0

02H 16H 09H *1H *2H

02H 16H 07H *1H *2H

02H 16H 08H *1H *2H

02H 17H 00H 00H **H 00
02H 17H 02H 00H **H 00

02H 17H 02H 01H **H 00
02H 17H 02H 02H **H 00

02H 17H 02H 03H **H 00
02H 17H 05H 00H **H 00

02H 17H 01H *1H *2H

FH

00H 00H **H 00

AH

00H *H *H:00

Hi

Low

**

H~03H:

H: INT,01H: LINE LOCK
NTSC
PAL

H:LOW,01H:MID,02H:HIGH

H: OFF,01H: H,

H:POSI,01H:NEGA

H:OFF,01H:ON

H: OFF,01H: TRACKING

00

H: DETECTION

02

H:OFF,01H:FIXED/MOVED

H:OFF,01H:ON

H~06H:

H~04H:
*1

00
01

*2

00

*1

00

*2

00

*1

00

*2

00

*1

00H ~ 03H :

*2:

00
01
02
03

*1

00H ~ 03H:

*2

00
02

H: OFF,01H:ON

H~03H: MOSAIC1~4,04H: COLOR

H~DBH:

H~E0H:

H~E0H:

H~07H:
*1: 00

*2: 00

0~3 O

H~20CH:

000

H~270H:

000

OFF

,01

1~7 O
1~5 O

H: MOTION DETECTION
H: FIXED/MOVED

H:OFF,01H:ON

H~03H: MASK AREA1~4

H: OFF,01H: ON

H: OFF,01H: ON

H~03H: MASK AREA1~4

H: OFF,01H: ON

MASK AREA NO

SIZE adjust
H: height increase
H: height decrease
H: width decrease
H: width increase

MASK AREA NO

LOCATION adjust

H: UP move
H: LEFT move03H: RIGHT move

0~219 O

0~224 O
0~224 O

1~8 O

H~0BH(1~
H:OFF,01H:ON

-262~+262

-312~+312

02HV,03

H: ON

MASK NO.1~4

MASK NO.1~4

H: DOWN move

01

12)

H: H/V

,

O
O

O
O

O
O

O

O
O

O

O

O

O

O

O

O

O
O

O

- 30 -

PRIVACY

ASK AREA

M
SIZE

PRIVACY

ASK AREA

M
LOCATION

02H 17H 03H *1H *2H

02H 17H 04H *1H *2H

MASK AREA NO

*1

00H ~ 0BH:

SIZE adjust

*2:

H: height increase

00

H: height decrease

01

H: width increase

02

H: width decrease

03

MASK AREA NO

*1

00H ~ 0BH:

LOCATION adjust

*2

H: UP move

00

H: LEFT move03H: RIGHT move

02

Mask NO.1~12

MASK NO.1~12

H: DOWN move

01

Version 1.1

O

O

Horizonal Point

Horizonal Point

Vertical Point

Vertical Point

1 02H 17H 07H *1H *2H

2 02H 17H 08H *1H *2H

1 02H 17H 09H *1H *2H

202H17H0AH*1H *2H

Byte

7

7654321076543210

Pri NO.
Pri NO.:0x0H
Horizontal point value:*Hi~*Low

x00h~0x2E8H

0

7654321076543210

Pri NO.
Pri NO.:0x0H
Horizontal point value:*Hi~*Low

x00h~0x2E8H

0

7654321076543210

Pri NO.
Pri NO.:0x0H
Vertical point value:*Hi~*Low

x00h~0x124H

0

7654321076543210

Pri NO.
Pri NO.:0x0H
Vertical point value:*Hi~*Low

x00h~0x124H

0

Byte

Byte

Byte

Hi

*

~0

7

Hi

*

~0

7

Hi

*

~0

7

Hi

*

~0

xBH

xBH

xBH

xBH

Byte

Low

*

Byte

Low

*

Byte

Low

*

Byte

Low

*

8

8

8

8

O

O

O

O

PRESET

PRIVACY MASK
AREA SAVED DATA
DELETE

REVERSE

*

OFF:the left bottom corner

the left top corner

V:

Using the PRIVACY MASK AREA SAVED DATA DELETE command,the Privacy point will be

*

direct deleted even though not used the save command
PRESET SAVE
PRESET MOVE
PRESET DELETE
HOME RETURN

PRESET ID
OPERATION

02H 17H 06H 00H *H

(0,0) H :

(0,0)

03H 50H **H
03H 19H **H
03H 51H **H
02H 21H 00H 00H **H 00

02H 1

FH

the right bottom corner

H/V:the right top corner

FFH FFH
FFH FFH
FFH FFH

00H *1H *2H

PRIVACY MASK No.:0x0H

(0,0)

(0,0)

.

PRESET No.)

**(

PRESET No.)

**(

PRESET No.)

**(

H~47H: OFF,1~60 min.,

*1H

H~FFH: PRESET No.0~255

00

*2H

H:OFF,01H:ON

00

- 31 -

2~12

~0

hour

xBH

O

O
O
O
O

O

PRESET ID
MENU DISPLAY

00H A 05H F 0
01H B 06H G 0
02H C 07H H 0
03H D 08H I 0
04H E 09H J 0

LANGUAGE LANGUAGE SELECT

CCD

DEFECT
COMPENSATION

Version 1.1

*1H

H~FFH: PRESET No.0~255

00

02H 20H *1H *2H *3H

String Table

*

AH

K0FHP 14H U 19H Z 1

BH

L 10H Q 15H V 1

CH

M 11H R 16H W 1

DH

N 12H S 17H X 1

EH

O 13H T 18H Y 1

02H 1

55H 40H 00H 00H 00H O

EH

00H 00H **H

*2H (PRE

01H~0CH:0~12

*3H (

AH
BH
CH
DH

NTSC-1 MODEL

00
02
04

PAL-1 MODEL

00
02
04

CHINA MODEL

00

SET ID Sequence)

String)

EH

4 23H 9 28H +

H: French

H: French
H: Spanish

03

space

01FH5 24H
1 20H 6 25H : 2
2 21H 7 26H ? 2
3 22H 8 27H - 2

H: English,
H: Spanish,03H: Japanese
H: Portuguese

H: English,
H: German
H: Italian

H: Chinese

01

01

29H *

AH
BH
CH

O

(
)
/

O

- 32 -

◆ Camera Inquiry Command

Command Byte4 Byte5 Byte6 Byte7 Byte8 Items

POSITION

ZOOM

MAGNIFICATION

FOCUS POSITION

DAY
RED,BLUE Gain value

AWC

NIGHT
RED,BLUE Gain value

Horizontal&Vertical
Value

BLC USER
AREA

Horizontal Value

Vertical Value

Horizontal&Vertical
Value

FILTER_
AUTO
MASK

1_

AREA

FILTER_
AUTO
MASK

2_

AREA

INTELLI­GENCE

Horizontal Value

Vertical Value

Horizontal&Vertical
Value

Horizontal Value

Vertical Value

ALARM State

Version 1.1

A0

00 00 70

50H

60H

63H

61H

62H

65H

*

7654321076543210765432107654321076543210

Horizontal Start Point Horizontal End Point Vertical Start Point Vertical End Point
9876543210987654321098765432109876543210

66H

67H

68H

7654321076543210765432107654321076543210

Horizontal Start Point Horizontal End Point Vertical Start Point Vertical End Point
9876543210987654321098765432109876543210

69H

6

6

7654321076543210765432107654321076543210

Horizontal Start Point Horizontal End Point Vertical Start Point Vertical End Point
9876543210987654321098765432109876543210

6

6

6

FFH FFH FFH FFH

FFH FFH FFH FFH

FFH FFH FFH FFH

FFH FFH FFH FFH

FFH FFH FFH FFH

FFH FFH FFH FFH A0

Byte

◇◇

Byte

Byte

AH FFH FFH FFH FFH

BH FFH FFH FFH FFH A0

Byte

CH FFH FFH FFH FFH

DH FFH FFH FFH FFH

EH FFH FFH FFH FFH

Byte8value

4~

4

FFH FFH FFH FFH

FFH FFH FFH FFH

FFH FFH FFH FFH A0

4

FFH FFH FFH FFH

4

Byte

Byte

Byte

5

*

◇◇

5

*

◇◇

5

Byte

Byte

Byte

Byte

Byte

"

◇◇ ◇◇

"

◆◆ ◆◆

A0

00 00 60 00 00

"

◇◇ ◇◇

Return value(x1

:

A0

00 00 63 00 00

"

◇◇ ◇◇

A0

00 00 61

"

◆◆ ◆◆

"

◇◇ ◇◇

A0

00 00 62

"

◆◆ ◆◆

"

◇◇ ◇◇

00 00

6

A0

00 00 66

"

◆◆ ◆◆

"

◇◇ ◇◇

A0

00 00 67

"

◆◆ ◆◆

"

◇◇ ◇◇

00 00

Byte8value

4~

6

A0

00 00 69

"

◆◆ ◆◆

"

◇◇ ◇◇

A0

00 00 6A

"

◆◆ ◆◆

"

◇◇ ◇◇

00 00

Byte8value

4~

6

A0

00 00 6C

"

◆◆ ◆◆

"

◇◇ ◇◇

A0

00 00 6D

"

◆◆ ◆◆

"

◇◇ ◇◇

A0

00 00 6E

"◆◆" : 00 → ALARM OFF
"◆◆" : 01 → ALARM ON

◆◆ ◆◆ ◇◇ ◇◇

Zoom Position value

"

DZoom Position value

"

◇◇ ◇◇

ZoomMagnification value

"

~ x468)

◇◇ ◇◇

FOCUS value

"

◆◆ ◆◆ ◇◇ ◇◇

Red Gain value

"

Blue Gain value

"

◆◆ ◆◆ ◇◇ ◇◇

Red Gain value

"

Blue Gain value

"

◇◇ ◇◇ ◇◇ ◇◇ ◇◇

Byte

7

◆◆ ◆◆ ◇◇ ◇◇

Horizontal Start Point value

"

Horizontal End Point value

"

◆◆ ◆◆ ◇◇ ◇◇

Vertical Start Point value

"

Vertical End Point value

"

◇◇ ◇◇ ◇◇ ◇◇ ◇◇

Byte

7

◆◆ ◆◆ ◇◇ ◇◇

Horizontal Start Point value

"

Horizontal End Point value

"

◆◆ ◆◆ ◇◇ ◇◇

Vertical Start Point value

"

Vertical End Point value

"

◇◇ ◇◇ ◇◇ ◇◇ ◇◇

Byte

7

◆◆ ◆◆ ◇◇ ◇◇

Horizontal Start Point value

"

Horizontal End Point value

"

◆◆ ◆◆ ◇◇ ◇◇

Vertical Start Point value

"

Vertical End Point value

"

00 00 00 ◆◆

Byte

Byte

Byte

8

8

8

- 33 -

Version 1.1

◆ Pan/Tilt angle decide the privacy area display

NO Ack. Signal

(

)

Command Byte4 Byte5 Byte6 Byte7 Byte8 Items

eceived the current pan/tilt value, the

R

02H 25H **H **H **H

Byte6

*

PAN/TILT ANGLE

When Pan/Tilt angle is changed,always send the Pan/Tilt angle to ZM395 set

※

value

~8

Byte6 Byte7 Byte8

pan_high

bit

(

5~12)

Pan input range

0 ~ 3590 (0

X000~0XE06

pan_low

bit

(

privacy zone display area will be changed
automatically.

tilt_high

1~4)

)

bit

(

5~12)

0~3590 (0

Tilt input range

X000~0XE06

.

Becausethe privacy zone need the current Pan/Tilt angle to displaywhen you set the privacy zone

se the protocol is like the above.

U

ex) when the Pan angle is

and Tilt angle is

180°

send the protocol is like

30°,

:022570812C.

tilt_low

bit

(

1~4)

)

.

- 34 -