Samsung SCC-C6455N User Manual

User Manual

Smart Dome Camera

SCC-C6455N

imagine the possibilities

Thanks you for purchasing this Samsung product. To receive a more complete service, please visit our website www.samsungsecurity.com

00885A-NA_SCC-C6455N-ENG.indb 1 2009-08-05 오후 2:42:40

2_ overview

overview

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.

This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.

WARNING

To reduce the risk of ﬁre or electric shock, do not expose this appliance to rain or moisture.

To prevent injury, this apparatus must be securely attached to the ﬂoor/wall in accordance with the installation instructions.

Use only the 24V, 60Hz AC adaptor for power supply.

WARNING

Be sure to use only the standard adapter that is speciﬁed in the speciﬁcation sheet. Using any other adapter could cause ﬁre, electrical shock, or damage to the product.

Incorrectly connecting the power supply or replacing battery may cause explosion, ﬁre, electric shock, or damage to the product.

Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause abnormal heat generation or ﬁre.

Securely plug the power cord into the power receptacle. Insecure connection may cause ﬁre.

When installing the camera, fasten it securely and ﬁrmly. The fall of camera may cause personal injury.



00885A-NA_SCC-C6455N-ENG.indb 2 2009-08-05 오후 2:42:41

English _3

English

Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers ﬁlled with water on top of the camera. Doing so may cause personal injury due to ﬁre, electric shock, or falling objects.

Do not install the unit in humid, dusty, or sooty locations. Doing so may cause ﬁre or electric shock.

If any unusual smells or smoke come from the unit, stop using the product. In such case, immediately disconnect the power source and contact the service center. Continued use in such a condition may cause ﬁre or electric shock.

If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modiﬁcations or attempted repair.)

When cleaning, do not spray water directly onto parts of the product. Doing so may cause ﬁre or electric shock

Do not expose the product to the direct airﬂow from an air conditioner. Otherwise, it may cause moisture condensation inside the Clear Dome due to temperature difference between internal and external of the dome camera.

If you install this product in a low-temp area such as inside a cold store, you must seal up the wiring pipe with silicon, so that the external air can not ﬂow inside the housing. Otherwise, external high, humid air may ﬂow inside the housing, pooling moisture or vapor inside the product due to a difference between internal and external temperature.

10.

11.

12.

00885A-NA_SCC-C6455N-ENG.indb 3 2009-08-05 오후 2:42:41

overview

4_ overview

CAUTION

Do not drop objects on the product or apply strong blows to it. Keep away from a location subject to excessive vibration or magnetic interference.

Do not install in a location subject to high temperature (over 50°C), low temperature (below -10°F), or high humidity. Doing so may cause ﬁre or electric shock.

If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall it.

Remove the power plug from the outlet when there is a lighting storm. Neglecting to do so may cause ﬁre or damage to the product.

Keep out of direct sunlight and heat radiation sources. It may cause ﬁre. Install it in a place with good ventilation. Avoid aiming the camera directly towards extremely bright objects such as sun, as

this may damage the CCD image sensor. Apparatus shall not be exposed to dripping or splashing and no objects ﬁlled with

liquids, such as vases, shall be placed on the apparatus. The Mains plug is used as a disconnect device and shall stay readily operable at

any time. When using the camera outdoors, moisture may occur inside the camera due

to temperature difference between indoors and outdoors. For this reason, it is recommended to install the camera indoors. For outdoor use, use the camera with built-in fan and heater.

10.

00885A-NA_SCC-C6455N-ENG.indb 4 2009-08-05 오후 2:42:41

English _5

English

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions :

1) This device may not cause harmful interference, and

2) This device must accept any interference received including interference that may cause undesired operation.

Caution

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

IC Compliance Notice

This Class A digital apparatus meets all requirements of the Canadian Interference.-Causing Equipment Regulations of ICES-003.

00885A-NA_SCC-C6455N-ENG.indb 5 2009-08-05 오후 2:42:41

overview

6_ overview

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions. Do not install near any heat sources such as radiators, heat registers, or other

apparatus (including ampliﬁers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug.

A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not ﬁt into your outlet, consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories speciﬁed by the manufacturer. Use only with the cart, stand, tripod, bracket, or table speciﬁed

by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

Unplug this apparatus during lightning storms or when unused for long periods of time.

Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus

10.

11.

12.

13.

14.

00885A-NA_SCC-C6455N-ENG.indb 6 2009-08-05 오후 2:42:41

English _7

English

CONTENTS

OVERVIEW

6 Important Safety Instructions 7 Contents 8 Features 8 What’s Included 9 At a Glance

INSTALLATION &

CONNECTION

10 Preparing Installation 10 Installation 14 Initial Setup 17 Connecting With Other Device

SETUP

20 How to use the Keyboard

Controller

21 Main Menu 22 Proﬁle 24 Camera Set 33 Intelligent Video 34 Privacy Zone 35 Preset 37 Auto Set 41 Zone Set 42 Alarm Set 44 Clock Set 44 Other Set 46 Communication 46 System Info 47 Language

APPENDIX

48 Shortcut Keys 49 Speciﬁcations 51 Product Appearance

00885A-NA_SCC-C6455N-ENG.indb 7 2009-08-05 오후 2:42:41

overview

8_ overview

FEATURES

With the state-of-the-art digital signal processing technology, full digital image processing and special algorithm of 600-line high resolution implemented

High performance surveillance camera, equipped with x43 zoom lens and digital zoom IC, enabling monitoring up to 688 times

WDR to cover the full screen irregardless of its brightness DAY/NIGHT to improve the sensitivity by automatic conversion into the black and

white mode at night or in the environment with low illumination White Balance to control the brightness to the illumination Backlight Compensation under spotlight or utmost bright illumination Auto Focus to automatically adjust the focus to the subject movement Privacy zone to hide a speciﬁc area for personal privacy PAN/TILT for precise control at high speed

WHAT’S INCLUDED

Please check if your camera and accessories are all included in the product package.

Camera Frame Set Cover

User Manual

User Manual Template Connectors



 

    

00885A-NA_SCC-C6455N-ENG.indb 8 2009-08-05 오후 2:42:45

English _9

English

AT A GLANCE

CAMERA

FRAME SET

Wipe out a dirty surface of the lens softly with a lens tissue or cloth to which you have applied ethanol.



LENS

HOOK

ALARM IN

ALARM OUT

RS-485

POWER INPUT

00885A-NA_SCC-C6455N-ENG.indb 9 2009-08-05 오후 2:42:50

10_ installation & connection

installation & connection

PREPARING INSTALLATION

Use the ceiling installation template when you install the camera on the ceiling on your own.

Run the cables through the “” shaped hole on the center of the template, and remove ﬁlms on the adhesives, and then attach the template on the desired location on the ceiling.

When installing the frames set, align all template’s screw holes and those of the frames set.

This template prevents dust entering from the ceiling into the camera assembly.

INSTALLATION

Press the “SNAP FIT” on the “ADAPTOR” to open the “ADAPTOR”, and arrange cables so they pass out of the “FRAME SET”.



EXTERNAL CABLES

FRAME SET

ADAPTOR

SNAP FIT

ADAPTOR

SNAP FIT

CABLESCEILING CABLESCEILING TEMPLATE

00885A-NA_SCC-C6455N-ENG.indb 10 2009-08-05 오후 2:42:54

English _11

English

Use the three “SCREWS” to ﬁx the “FRAME SET” on a “CAMERA” installation position.

Connect external cables to the “CONNECTORS(ALARM IN, POWER, RS-485, ALARM OUT)”and connect the “CONNECTOR” to the “ADAPTOR”. Insert the cable into the “FRAME SET”, and close the “ADAPTOR”.

Then, wrap the “BNC JACK” with the “INSULATION TUBE”, and use an insulation tape to seal up the end of the “INSULATION TUBE” so that the “BNC JACK” does not protrude outside of the “INSULATION TUBE” coating. For more information about cable connection, refer to “Connecting the adaptor cable”. (page 19)



FRAME SET

ADAPTOR

SNAP FIT

INSULATION TUBE

BNC JACK

ALARM OUT

ALARM IN

RS-485

POWER INPUT

FRAME SET

ADAPTOR

SCREW

00885A-NA_SCC-C6455N-ENG.indb 11 2009-08-05 오후 2:43:00

installation & connection

12_ installation & connection

Connect the “SAFETY WIRE” of the “CAMERA” to the “BRACKET WIRE” on the “FRAME SET”. Arrange the “22P CONNECTOR” of the “CAMERA” in line with that of the “ADAPTOR”, push the “HOOK” on either end of the “CAMERA” in the “RACK” direction of the “FRAME SET” to secure the two. Then, ensure that all of the two “HOOKS” “clicks” to ﬁx to the “RACK” properly.

When the installation is completed, remove the “PROTECTIVE FILM” and “PROTECTIVE TAPE” from on the lens.



FRAME SET

22P CONNECTOR

CAMERA

SAFETY WIRE

BRACKET WIRE

FRAME SET

CAMERA

RACK

HOOK

RACK

HOOK

CAMERA

FRAME SET

PROTECTIVE FILM

PROTECTIVE TAPE

00885A-NA_SCC-C6455N-ENG.indb 12 2009-08-05 오후 2:43:08

English _13

English

Arrange the “COVER” arrow in line with the “FRAME SET” arrow, and push in the “COVER”. Insert the “COVER” to the end, and turn the “COVER” clockwise. As shown in the ﬁgure below, turn it until you see the “BUTTON” hole and hear a click.

Ensure that the “COVER” should not move any further if you turn the “COVER” counter clockwise.

If you want to remove the “COVER”, hold down the “BUTTON” and turn the “COVER” counter clockwise to remove the “COVER”.



FRAME SET

BUTTON

CAMERA

COVER

BUTTON

COVER

00885A-NA_SCC-C6455N-ENG.indb 13 2009-08-05 오후 2:43:11

installation & connection

14_ installation & connection

INITIAL SETUP

Camera Address Setup

Use SW606, SW605, and SW604 to specify the camera address. You can specify between 0 and 255 for the address, where the hundreds digit is with SW606, the tens digit with SW605, and the ones digit with SW604. ex) Camera address: If the address is 1, follow the steps in the figure below.

Communication Protocol Setup

Use pins #1~#4 of SW603 to specify the communication protocol.

Comp

PIN1 PIN2 PIN3 PIN4

A OFF OFF OFF OFF B ON OFF OFF OFF C OFF ON OFF OFF D ON ON OFF OFF E OFF OFF ON OFF F ON OFF ON OFF G OFF ON ON OFF H ON ON ON OFF

I OFF OFF OFF ON J ON OFF OFF ON K OFF ON OFF ON L ON ON OFF ON M OFF OFF ON ON N ON OFF ON ON O OFF ON ON ON P ON ON ON ON

A : SAMSUNG HALF B : SAMSUNG FULL

SW606

(x100)

SW605

(x10)

SW604

(x1)

00885A-NA_SCC-C6455N-ENG.indb 14 2009-08-05 오후 2:43:14

English _15

English

Baud Rate Setup

Use pins #5, #6 of SW603 to set the baud rate.

BAUD RATE PIN 5 PIN 6

4800 BPS ON ON

9600 BPS OFF ON 19200 BPS ON OFF 38400 BPS OFF OFF

The factory default is 9600 BPS.

Setting RS-422A/RS-485 Termination

As it is shown in the structure map, when Controller and RS-422A/RS-485 is connected, it should be terminated according to the Cable feature of impedance on the each end of the transmitting line to transfer the signals in long distance by controlling the reflection of the signals to the lowest.

Termination : Using numbers 1 and 2 PIN, turn to <ON> and it will be terminated.

Controller

Termination

n < 32

Termination SW1-ON

CAM n

CAM n-1

CAM 2

CAM 1

TX+(DATA+) TX-(DATA-)

RX-

RX+

RX+ RX- RX+ RX- RX+ RX-

<RS-485 Half Duplex Organization>

00885A-NA_SCC-C6455N-ENG.indb 15 2009-08-05 오후 2:43:14

installation & connection

16_ installation & connection

A communication error may occur if you connect multiple cameras that are assigned the same address in the network.



Controller

Termination

n < 32

Termination SW1-ON SW2-ON

CAM n

CAM n-1

CAM 2CAM 1

<RS-422A/RS-485 Full Duplex Organization>

00885A-NA_SCC-C6455N-ENG.indb 16 2009-08-05 오후 2:43:14

+ 36 hidden pages