Samsung SCC-C4339P, SCC-C4337P, SCC-C4237P, SCC-C4239P User Manual

SCC-C4237P SCC-C4337P SCC-C4239P SCC-C4339P

Power Zoom Camera

User Manual

imagine the possibilities

Thanks you for purchasing this Samsung product. To receive a more complete service, please visit our website www.samsungsecurity.com

overview

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.

This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.

WARNING



To reduce the risk of ﬁ re or electric shock, do not expose this appliance to rain or moisture.



To prevent injury, this apparatus must be securely attached to the ﬂ oor/wall in accordance with the installation instructions.

WARNING

Be sure to use only the standard adapter that is speciﬁ ed in the speciﬁ cation

1. sheet. Using any other adapter could cause ﬁ re, electrical shock, or damage to the product. Incorrectly connecting the power supply or replacing battery may cause

2. explosion, ﬁ re, electric shock, or damage to the product. Do not connect multiple cameras to a single adapter. Exceeding the capacity

3. may cause abnormal heat generation or ﬁ re. Securely plug the power cord into the power receptacle. Insecure connection

4. may cause ﬁ re. When installing the camera, fasten it securely and ﬁ rmly. The fall of camera

5. may cause personal injury. Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.)

6. or containers ﬁ lled with water on top of the camera. Doing so may cause personal injury due to ﬁ re, electric shock, or falling objects.

Do not install the unit in humid, dusty, or sooty locations. Doing so may cause

2_ overview

ﬁ re or electric shock.

If any unusual smells or smoke come from the unit, stop using the product. In

8. such case, immediately disconnect the power source and contact the service center. Continued use in such a condition may cause ﬁ re or electric shock.

If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modiﬁ cations or attempted repair.)

10.

When cleaning, do not spray water directly onto parts of the product. Doing so may cause ﬁ re or electric shock.

CAUTION

Do not drop objects on the product or apply strong blows to it. Keep away from a location subject to excessive vibration or magnetic interference.

Do not install in a location subject to high temperature (over 50°C), low temperature (below -10°C), or high humidity. Doing so may cause ﬁ re or electric shock.

If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall it.

English

Remove the power plug from the outlet when there is a lighting storm. Neglecting to do so may cause ﬁ re or damage to the product.

Keep out of direct sunlight and heat radiation sources. It may cause ﬁ re.

Install it in a place with good ventilation.

Avoid aiming the camera directly towards extremely bright objects such as sun, as this may damage the CCD image sensor.

Apparatus shall not be exposed to dripping or splashing and no objects ﬁ lled with liquids, such as vases, shall be placed on the apparatus.

The Mains plug is used as a disconnect device and shall stay readily operable at any time.

10.

When using the camera outdoors, moisture may occur inside the camera due to temperature difference between indoors and outdoors. For this reason, it is recommended to install the camera indoors. For outdoor use, use the camera with built-in fan and heater.

English _3

overview

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the

7. manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat registers, or other

8. apparatus (including ampliﬁ ers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding-type plug.

9. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not ﬁ t into your outlet, consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs,

10. convenience receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories speciﬁ ed by the manufacturer.

11.

Use only with the cart, stand, tripod, bracket, or table

12. speciﬁ ed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

Unplug this apparatus during lightning storms or when

13. unused for long periods of time.

Refer all servicing to qualiﬁ ed service personnel. Servicing is required when

14. the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus

4_ overview

CONTENTS

OVERVIEW

INSTALLATION &

CONNECTION

SETUP

4 Important Safety Instructions 5 Contents 6 Features 7 What’s Included 7 Part Names and Functions

11 Preparing Installation 11 Connecting the Cables

14 Main Menu 15 Proﬁ le 17 Camera Set 26 Intelligent Video 28 Privacy Zone 29 Preset 30 Other Set 31 Communication 31 System Info 32 Language

English

APPENDIX

33 Shortcut Keys 34 Speciﬁ cations

English _5

overview

FEATURES



With the state-of-the-art digital signal processing technology, full digital image processing and special algorithm of 600-line high resolution implemented.



High Sensitivity: It implements images of high sensitivity using the up-to-date SuperHAD IT CCD(SCC-C4237P/C4337P)/ExView-HAD PS CCD(SCC-C4239P/C4339P).



VPS(Virtual Progressive Scan): This is an advanced technology that reproduces a sharp progressive image. This is appropriate to high quality recording and ﬁ le transfer via the Internet. (SCC-C4239P/C4339P only)



High performance surveillance camera, equipped with x34 zoom lens and digital zoom IC, enabling monitoring up to 544 times



WDR extends the contrast range as it takes a picture of each of dark and bright areas before compositing the two, which is useful if you take a picture of windows inside a building. Namely, it improves the picture quality of the outdoor scenery as well as indoor.(SCC-C4239P/C4339P only)



Low Illumination: It uses the digital signal technologies such as low illumination and Day/Night functions that make your camera identify objects even in the worst environment.



XDR (eXtended Dynamic Range): Actively controls the gamma compensation in the way it operates the ambient luminance contrast in a certain pixel unit to determine the optimal visibility.



Digital Power Synchronization: The full digital Line Lock function directly adjusts the vertical camera synchronization to enhance the operationability and reliability of this camera.(SCC-C4337P/C4339P only)



DAY/NIGHT: illumination below the normal value.



White Balance to control the brightness to the illumination



Superior Backlight Adjustment:When an object has a bright illumination or sunlight behind it, this camera automatically improves the shaded object picture quality.



Auto Focus to automatically adjust the focus to the subject movement



Privacy zone to hide a speciﬁ c area for personal privacy.

This function can make the IR Cut ﬁ ltering function inactive under the

6_ overview

WHAT’S INCLUDED

Please check if your camera and accessories are all included in the product package.

Camera Holder

Camera

(Mount Adaptor)

2 Screws

User's Manual

PART NAMES AND FUNCTIONS

English

SIDE VIEW

Wipe out a dirty surface of the lens softly with a lens tissue or cloth to which you have



applied ethanol.

Mount Adapter Fixing Grooves

Camera Lens

English _7

overview

Rear Panel

SCC-C4337P











SCC-C4237P



SCC-C4339P







SCC-C4239P



















 Input/Output Connector

This connector has input and output ports for RS-485 control signals, DAY/NIGHT switching, and alarm output signals.

SCC-C4239P/C4339P

SCC-C4237P/C4337P





8_ overview

1. ALARM OUT Alarm out jack for motion detection. (Open Collector, On Gnd)

2. GND Grounding jack.

3. TRIGGER IN (SCC-C4239P/C4339P)

Displays the current still image when it receives the Trigger signal. (Normal Open Type)

4.5.6 FOCUS, COM, ZOOM

This port is used for ZOOM/FOCUS, MENU CONTROL, HOME RETURN, and ONEAF by using an external controller. Depending on the input condition, 4 modes, A, B, C, and D are available. (SPECIAL - CTRL TYPE) (Operation Voltage Range : +3V~+13V, -3V~-13V)

1) When the voltage is supplied to either ZOOM or FOCUS port

English

Function *1

Code

A -6V +6V -6V +6V B -6V +6V +6V -6V C +6V -6V -6V +6V D

Tele(Up)

ZOOM Port FOCUS Port

+6V -6V +6V -6V

Wide(Down)

Near(Left) Far(Right)

*1: During MENU OFF, controls ZOOM/FOCUS and during MENU ON,

changes the direction, Up/Down/Left/Right SETUP switch.

2) When the voltage is supplied to both ports

Function

Code

A -6V -6V +6V +6V B -6V +6V +6V -6V C +6V -6V -6V +6V D

ENTER/AF *2 HOME RETURN *3

ZOOM Port

+6V +6V -6V -6V

FOCUS Port

ZOOM Port

FOCUS Port

English _9

* 2 : For short voltage supply during MENU OFF, executes ONEAF and for

more than 2 second

* 3 : For more than 2 second long voltage supply, moves to the PRESET

0(HOME) position.

7. 5V OUT Power supply jack for RS-485 JIG. Use within typical DC +5V 100mA.

8. DAY/NIGHT IN This is a function to receive the external DAY/NIGHT signal from the sensor(option) and convert the signal into BW.

9. RS-485 DATAJack for connection to RS-485 DATA- signal line.

10. RS-485 DATA+ Jack for connection to RS-485 DATA+ signal line.

 SETUP Switch

This switch is used to set the function or property. When this switch is pressed for at least 2 seconds, the MAIN MENU appears.

ef (Left/Right)

(Up/Down) :

 : When you press this switch in the menu, the selected function is conﬁ rmed.

To enter a submenu, press this button.

: By pressing this switch left or right, you can move left or right

on the menu or change the displayed value.

By pressing this switch up or down, you can move up or down on the menu.

 Video OUT Port

This is connected to the Video Input Port of the monitor and it outputs the Video signals.

 GND

This is a grounding port.

 Power Connection Port

This is connected to the Power cable.

 Power Display LED

When the power is normally connected, the red LED lights.

10_ installation & connection

installation & connection

PREPARING INSTALLATION

To install and use the camera, ﬁ rst prepare the following cables.



POWER ADAPTER CABLE (SOLD SEPARATELY)



The requirements for the power adapter, which connects to the camera’s

POWER IN terminal, are as follows:

- SCC-C4237P/C4239P : DC 12V 600mA

- SCC-C4337P/C4339P: AC 24V 300mA DC 12V 600mA

English

VIDEO CABLE(SOLD SEPARATELY)



Use a BNC cable, such as the one shown below, to connect the camera’s VIDEO OUT to the monitor.

INSTALLATION

1. Connect one end of the BNC cable(not included) to the VIDEO OUT.

2. Connect the other end of the BNC cable (not included) to the VIDEO IN of the

monitor.

English _11

+ 25 hidden pages