Samsung SCB-2020, SCB-3020 User Manual

Compact High Resolution
ATM Camera

User Manual

SCB-3020
SCB-2020

Compact High Resolution ATM Camera

User Manual

Copyright

©2010 Sam sung Techwin Co., Ltd. Al l rights reserv ed.

Tra dem ark

The name of t his product is the re gistered tradem ark of Samsung Techwin C o., Ltd.
Other tr ademarks mentio ned in this manual are t he registered tr ademark of their res pective compan y.

Restriction

Samsung Tech win Co., Ltd shall res erve the copyri ght of this document . Under no circumst ances, this docu ment shall be
reprodu ced, distribute d or changed, par tially or wholly, wit hout formal autho rization of Sam sung Techwin.

Disclaimer

Samsung Tech win makes the best to v erify the integr ity and correc tness of the conte nts in this documen t, but no formal
guarante e shall be provided . Use of this documen t and the subsequen t results shall be en tirely on the user’s ow n respon­sibilit y. Samsung Techwin reser ves the right to cha nge the contents o f this document wit hout prior notic e.

Warra nty

If the pro duct does not oper ate properly in no rmal conditions , please let us know. S amsung Techwin will res olve the
problem fo r free of charge. Th e warranty peri od is 3 years. Howeve r, the follow ings are excluded:

•

If the sys tem behaves abnorm ally because you r un a program irrelev ant to the system ope ration.

•

Deterio rated perform ance or natural wor n-out in proces s of time

is the regis tered logo of Sams ung Techwin Co., Ltd.

Safety information

CAUTION

RISK OF ELECTRIC SHOCK.DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER

(OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSISTING A RISK OF
ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS EXCLAMATION POINT SYMBOL IS INTENDED TO ALERT THE USER TO THE
PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS
IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR

•

MOISTURE.

TO PREVENT INJURY, THIS APPARATUS MUST BE SECURELY ATTACHED TO THE FLOOR/WALL IN

•

ACCORDANCE WITH THE INSTALLATION INSTRUCTIONS.

•

IF THIS POWER SUPPLY IS USED AT 240V AC, A SUITABLE PLUG ADAPTER SHOULD BE USED.

WARNING

1.

BE SURE TO USE ONLY THE STANDARD ADAPTER THAT IS SPECIFIED IN THE SPECIFICATIO
USING ANY OTHER ADAPTER COULD CAUSE FIRE, ELECTRICAL SHOCK, OR DAMAGE TO THE PRODUCT.

2.

INCORRECTLY CONNECTING THE POWER SUPPLY OR REPLACING BATTERY MAY CAUSE EXPLOSION, FIRE,
ELECTRIC SHOCK, OR DAMAGE TO THE PRODUCT.

N SHEET.

3

Safety information

DO NOT CONNECT MULTIPLE CAMERAS TO A SINGLE ADAPTER. EXCEEDING THE CAPACITY MAY CAUSE

3.
ABNORMAL HEAT GENERATION OR FIRE.

SECURELY PLUG THE POWER CORD INTO THE POWER RECEPTACLE. INSECURE CONNECTION MAY CAUSE FIRE.

4.

WHEN INSTALLING THE CAMERA, FASTEN IT SECURELY AND FIRMLY. THE FALL OF CAMERA MAY CAUSE

5.
PERSONAL INJURY.

DO NOT PLACE CONDUCTIVE OBJECTS (E.G. SCREWDRIVERS, COINS, METAL PARTS, ETC.) OR CONTAINERS FILLED

6.
WITH WATER ON TOP OF THE CAMERA. DOING SO MAY CAUSE PERSONAL INJURY DUE TO FIRE, ELECTRIC SHOCK,
OR FALLING OBJECTS.

7.

8.

9.

10.

LL THE UNIT IN HUMID, DUSTY, OR SOOTY LOCATIONS. DOING SO MAY CAUSE FIRE OR

DO NOT INSTA
ELECTRIC SHOCK.

IF ANY UNUSUAL SMELLS OR SMOKE COME FROM THE UNIT, STOP USING THE PRODUCT. IN SUCH CASE,
IMMEDIATELY DISCONNECT THE POWER SOURCE AND CONTACT THE SERVICE CENTER. CONTINUED USE
IN SUCH A CONDITION MAY CAUSE FIRE OR ELECTRIC SHOCK.

IF THIS PRODUCT FAILS TO OPERATE NORMALLY, CONTACT THE NEAREST SERVICE CENTER.
NEVER DISASSEMBLE OR MODIFY THIS PRODUCT IN ANY WAY. (SAMSUNG IS NOT LIABLE
FOR PROBLEMS CAUSED BY UNAUTHORIZED MODIFICATIONS OR ATTEMPTED REPAIR.)

WHEN CLEANING, DO NOT SPRAY WATER DIRECTLY ONTO PARTS OF THE PRODUCT. DOING SO

MAY CAUSE FIRE OR ELECTRIC SHOCK.

Safety information

CAUTION

DO NOT DROP OBJECTS ON THE PRODUCT OR APPLY STRONG BLOWS TO IT. KEEP AWAY

1.
FROM A LOCATION SUBJECT TO EXCESSIVE VIBRATION OR MAGNETIC INTERFERENCE.

DO NOT INSTALL IN A LOCATION SUBJECT TO HIGH TEMPERATURE (OVER 140°F), LOW

2.
TEMPERATURE (BELOW -14°F), OR HIGH HUMIDITY. DOING SO MAY CAUSE FIRE OR ELECTRIC
SHOCK.

IF YOU WANT TO RELOCATE THE ALREADY INSTALLED PRODUCT, BE SURE TO TURN OFF THE

3.
POWER AND THEN MOVE OR REINSTALL IT.

REMOVE THE POWER PLUG FROM THE OUTLET WHEN THERE IS A LIGHTING STORM.

4.
NEGLECTING TO DO SO MAY CAUSE FIRE OR DAMAGE TO THE PRODUCT.

KEEP OUT OF DIRECT SUNLIGHT AND HEAT RADIATION SOURCES. IT MAY CAUSE FIRE.

5.

INSTALL IT IN A PLACE WITH GOOD VENTILATION.

6.

AVOID AIMING THE CAMERA DIRECTLY TOWARDS EXTREMELY BRIGHT OBJECTS SUCH AS

7.
SUN, AS THIS MAY DAMAGE THE CCD IMAGE SENSOR.

APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED

8.
WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

THE MAINS PLUG IS USED AS A DISCONNECT DEVICE AND SHALL STAY READILY OPERABLE AT ANY TIME.

9.

FCC STATEMENT

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS :

1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND

4 – High Resolution Compact ATM Camera

5

Safety information Safety information

2)

THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.

Caution

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL
DEVICE, PURSUANT TO PART 15 OF FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE
PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL
ENVIRONMENT.
THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED
AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE TO
RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE
HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO CORRECT THE INTERFERENCE
AT HIS OWN EXPENSE.

IC COMPLIANCE NOTICE

THIS CLASS A DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE
CANADIAN INTERFERENCE.-CAUSING EQUIPMENT REGULATIONS OF ICES-003.

6 – High Resolution Compact ATM Camera

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection
systems)

This marking on the product, accessories or literature indicates that the product and its electronic
accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste
at the end of their working life. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate these items from other types of waste and recycle them
responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local
government office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

Correct disposal of batteries in this product

(Applicable in the European Union and other European countries with separate battery return
systems.)

This marking on the battery, manual or packaging indicates that the batteries in this product
should not be disposed of with other household waste at the end of their working life. Where
marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury,
cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not
properly disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from
other types of waste and recycle them through your local, free battery return system.

7

Important Safety Instructions

Read these instructions.

1.
Keep these instructions.

2.
Heed all warnings.

3.
Follow all instructions.

4.
Do not use this apparatus near water.

5.
Clean only with dry cloth.

6.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

7.
Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifi ers) that

8.
produce heat.

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider

9.
than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong
is provided for your safety. If the provided plug does not fi t into your outlet, consult an electrician for replacement of the
obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point

10.

where they exit from the apparatus.

Only use attachments/accessories specifi ed by the manufacturer.

11.
Use only with cart, stand, tripod, bracket, or table specifi ed by the manufacturer, or sold with the apparatus.

12.
Unplug this apparatus when a card is used. Use caution when moving the cart/ apparatus combination

13.

to avoid injury from tip-over.

Refer all servicing to qualifi ed service personnel. Servicing is required when the apparatus has been

14.

damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.

Apparatus shall not be exposed to dripping or splashing and no objects fi lled
with liquids, such as vases, shall be placed on the apparatus

Contents

Introduction

Features .................................................. 10

PRODUCT & ACCESSORIES .................................................. 11

Part Names and Functions .................................................. 12

Installation

Connecting the Remote Controller .................................................. 15

Connecting to Monitor .................................................. 16

Connecting to Power .................................................. 16

How to use OSD Menu

Using Icons in the Menu .................................................. 17

Main Menu .................................................. 17

Profi le .................................................. 18

Camera Setup .................................................. 22

Intelligence .................................................. 30

Privacy Zone Setup .................................................. 33

OTHER SET .................................................. 35

System Information .................................................. 36

Specifi cations

Specifi cations .................................................. 37

8 – High Resolution Compact ATM Camera

9

Introduction

Features

High Resolution

❖

•

This camera has realized high resolution of 600 lines using the top-notch full digital image processing and
special algorithm technologies.

❖

VPS(Virtual Progressive Scan)

•

This is an advanced technology that reproduces a sharp progressive image. This is appropriate to high quality
recording and fi le transfer via the Internet. ( For SCB-2020, the VPS option is not available.)

❖

Intelligent Motion Detection & Tracking

•

This is an intelligent function that automatically detects a motion of an object. You can set a virtual fence so it
sounds an alert if an object passes / enters /exits the virtual fence or virtual area.

❖

WDR

•

WDR extends the contrast range as it takes a picture of each of dark and bright areas before compositing the
two, which is useful if you take a picture of windows inside a building. Namely, it improves the picture quality
of the outdoor scenery as well as indoor. ( For SCB-2020, the WDR mode is not available.)

❖

XDR (eXtended Dynamic Range)

•

Actively controls the gamma compensation in the way it operates the ambient luminance contrast in a certain
pixel unit to determine the optimal visibility.

❖

High Sensitivity

Adopted SONY Super-HAD PS CCD (SCB-3020)/Super-HAD IT CCD (SCB-2020) which enables super sensitive video

•
acquisition.

Low Illumination

❖

Low illumination feature enabled by the digital signal processing technology that allows recording in a lowest illumination where

•
nearly no light is received.

Superior Backlight Adjustment

❖

•

When an object has a bright illumination or sunlight behind it, this camera automatically improves the shaded
object picture quality.

10 – High Resolution Compact ATM Camera

Introduction

Digital Power Synchronization

❖

•

The full digital Line Lock function directly adjusts the vertical camera synchronization to enhance the
operationability and reliability of this camera.

❖

Random Trigger Function

•

Recording video while synchronized to a random trigger signal is available. (This feature is not supported by
SCB-2020.)

❖

Output Signal Setting

•

You can set the following Video output signals: Image reversion (Horizontal, Vertical, or both), Privacy,
Horizontal/Vertical profi ling, and digital zooming.

❖

Coaxial Cable Communication

•

This is a remote control function that overlaps the coaxial cable (for a transfer of the video signal) with the control
signal. In installation or repair, this helps you control the communication controller (optional) without additional cabling.

PRODUCT & ACCESSORIES

Product & Accessories❖

Main Product

•

Accessories

•

Screw (2EA)8PIN Connector Cable Tie (1EA)

High Resolution Compact
ATM Camera

User Manual

User Manual

SCB-3020
SCB-2020

11

Introduction

EXT-IN

2. KEY_E

B

O

PART NAMES AND FUNCTIONS

Front❖

n

o

L-P

ULSE

GND

ALM.O

UR

Lens 3.7mm (F2.0)

n

Bracket Used to fi x the product on a wall or ceiling.

o

Video Out Outputs camera’s video signal, which is to be connected to a monitor’s Video In. The port can be

p

Power In Power cable is connected to this terminal.

q

L/L PULSE Clock port for LINE-LOCK control.

r

GND Grounding port.

s

ALM.OUT Alarm out port for camera’s alarm signal output.

t

12 – High Resolution Compact ATM Camera

used for menu control if connected with a controller.

Introduction

Rear❖

1. EXT-IN

2. KEY_E

3. GND

4. DSPSTB

5. DSPSDI

6. DSPSDO

7. DSPSCK

8. FSPE

1. L/L PULSE

2. Alarm_out

3. GND

4. Video out

5. GND

6. V+12V

Port for camera’s fi rmware update. For further details, refer to the below table:

n

p
q

r
s

t

NO Port Name Description

1 EXT-IN Input port for random trigger.

2 KEY-E Input port for multiplexed analog voltage key.

3 GND Grounding port for the board.

4 DSPSTB Selection port for JTAG upgrade chip.

5 DSPSDI Output port for JTAG upgrade data.

6 DSPSDO Output port for JTAG upgrade data.

7 DSPSCK Clock port for JTAG upgrade clock.

8 FSPE Selection port for JTAG upgrade mode.

Sample KET-E port’s external connection is



shown in the right.

1.

1. EXT-IN

2. KEY_E

3. GND

3. GND

4. DSPST

4. DSPSTB

5. DSPSDI

5. DSPSDI

6. DSPSD

6. DSPSDO

7. DSPSCK

7. DSPSCK

8. FSPE

8. FSPE

13

Introduction

1

2. Ala

3. GND

4. Video out ou

5

D

6. V+12V

Rear❖

1. EXT-IN

2. KEY_E

3. GND

4. DSPSTB

5. DSPSDI

6. DSPSDO

7. DSPSCK

8. FSPE

1. L/L PULSE

2. Alarm_out

3. GND

4. Video out

5. GND

6. V+12V

Port for camera’s fi rmware update. For further details, refer to the below table:

o

NO Port Name Description

1 L/L PULSE

2 Alarm_out

3 GND

4 Video out

5 GND

6 V+12V

Clock port for LINE-LOCK control.

Alarm out port for motion detection.

Grounding Port.

This is connected to the Video Input Port of the monitor and it outputs
the Video signals.

Grounding Port.

Input port for DC 12 V power.

. L/L Pulse

1. L/L PULSE

2. Alarm_out

rm out

3. GND

4. Video out

5. GND

. GN

6. V+12V

CONNECTING THE REMOTE CONTROLLER

To control the camera, a remote controller should be connected to.

POWER

STATUS

POWER

ADDRESS

OFF ON

(X)100 (X)10

(X)1

CABLE
COMPENSATION

3

3

3

2

2

2

4

4

4

1

1

1

5

5

5

0

0

0

6

6

6

9

9

9

7

7

7

8

8

8

SL

1ON2345678

1ON2

TERMINATION PROTOCOL

REMOTE CONTROLLER SPC-300

<CONTROLLER>

Connect the camera’s video out port to the CONTROLLER’s VIDEO IN.

1.

Connect the CONTROLLER’s VIDEO OUT port to a monitor’s video in.

2.

You can use the menu as following :

❖

- Press and hold [ENTER]: Moves to the main menu screen.

- Press [ENTER] briefl y: Used to confi rm the current settings.

-

Four Direction Keys: Used to move the cursor up/down or left/right.

Installation

14 – High Resolution Compact ATM Camera

15

Installation

CONNECTING TO MONITOR

Connect the Video Output jack to the VIDEO-IN jack of monitor.

POWER

VIDEO

CCTV Camera

CONNECTING TO POWER

Connect the adaptor to the power input terminal as shown in the fi gure below.

The recommended adaptor specifi cation for SCB-3020/SCB-2020 is DC 12V / 500mA.

POWER

VIDEO

Monitor

USING ICONS IN THE MENU

 (EXIT)

•

Exits the menu setting.
Before you exits the menu setting, select SAVE to
save your settings, or select QUIT to cancel.

 (RET)

•

Returns to the previous menu.

 (SAVE)

•

Used to save your settings of MASK AREA,
PRIVACY ZONE and more.
Once you save your settings, they will remain even
if you select QUIT in the menu.

 (DEL)

•

Used to deletes your settings of MASK AREA,
PRIVACY ZONE and more.
Once you delete your settings, they will not be
restored even if you select QUIT in the menu.

How to use OSD Menu

MAIN MENU

MAIN MENU

PROFILE



CAMERA SET
INTELLIGENCE
PRIVACY ZONE

OTHER SET

SYSTEM INFO



PROFILE

•

You can set a mode according to the camera
installation conditions.

CAMERA SET

•

Confi gure Camera related functions and data.

INTELLIGENCE

•

You can confi gure the settings of motion detection,
tracking and more.

PRIVACY ZONE

•

You can confi gure the privacy related settings.

OTHER SET

•

You can confi gure for Factory Defaults, and more.

SYSTEM INFO.

•

Shows the Camera Version and System Information.

16 – High Resolution Compact ATM Camera

17

How to use OSD Menu

PROFILE

e

PROFILE

f

STANDARD

ITS

BACKLIGHT

DAY/NIGHT

GAMING
CUSTOM

 

In the PROFILE menu, you can confi gure the following camera settings at once.

<SCB-3020>

CAMERA SET Menu

Previous Menu

VPS OFF ON OFF OFF OFF

IRIS

MOTION (F.FAST)--- (F.FAST)--- F.FAST (F.FAST)--- SLOW

Sub-menus

ELC - - - - -

BACKLIGHT OFF OFF WDR OFF OFF

WDR - - - - -

18 – High Resolution Compact ATM Camera

STANDARD ITS BACKLIGHT DAY/NIGHT GAMING

ELC ELC ELC ELC ELC

LEVEL 0 0 0 0 0

WEIGHT

WHITE BAL

User setting
allowed

User setting
allowed

User setting
allowed

User setting
allowed

MID

INDOOR

User setting
allowed

User setting
allowed

User setting
allowed

User setting
allowed

How to use OSD Menu

CAMERA SET Menu

Previous Menu

DNR MID MID MID MID MID

SHUTTER (OFF)--- (OFF)--- (OFF)--- (OFF)--- (OFF)---

SENS-UP AUTOx2 AUTOx2 AUTOx2 AUTOx4 AUTOx4

XDR MID MID MID MID MID

DAY/NIGHT

WHITE BAL

DETAIL 2 2 2 2 2

Sub-menus

NIGHT - - - - -

DAY - - - - -

NIGHT - - - - -

BRIGHTNESS

STANDARD ITS BACKLIGHT DAY/NIGHT GAMING

AUTO AUTO DAY AUTO DAY

BURST OFF ON OFF OFF OFF

DAY DAY/NIGHT DAY DAY/NIGHT DAY

MODE ATW2 ATW1 ATW2 ATW1 ATW1

RED 0 0 0 0 0

BLUE 0 0 0 0 0

User setting
allowed

MODE OFF ATW2 OFF ATW2 OFF

User setting

RED

allowed

User setting

BLUE

allowed

MID

0

0

User setting
allowed

User setting
allowed

User setting
allowed

MID

0

0

User setting
allowed

User setting
allowed

User setting
allowed

19

How to use OSD Menu

<SCB-2020>

CAMERA SET Menu

Previous Menu

IRIS

MOTION (F.FAST)--- (F.FAST)--- F.FAST (F.FAST)--- SLOW

DNR MID MID MID MID MID

SHUTTER (OFF)--- (OFF)--- (OFF)--- (OFF)--- (OFF)---

SENS-UP AUTOx2 AUTOx2 AUTOx2 AUTOx4 AUTOx4

XDR MID MID MID MID MID

DAY/NIGHT AUTO AUTO DAY AUTO DAY

WHITE BAL

Sub-menus

ELC - - - - -

BACKLIGHT OFF OFF BLC OFF OFF

NIGHT - - - - -

DAY - - - - -

STANDARD ITS BACKLIGHT DAY/NIGHT GAMING

ELC ELC ELC ELC ELC

LEVEL 0 0 0 0 0

BURST OFF ON OFF OFF OFF

DAY DAY/NIGHT DAY DAY/NIGHT DAY

MODE ATW2 ATW1 ATW2 ATW1 ATW1

RED 0 0 0 0 0

BLUE 0 0 0 0 0

How to use OSD Menu

CAMERA SET Menu

Previous Menu

WHITE BAL

DETAIL 2 2 2 2 2

❖

Sub-menus

NIGHT - - - - -

BRIGHTNESS

ITS

It will be set automatically so you can easily check the traffi c conditions.

BACKLIGHT

❖

It will be set automatically so you can distinguish the object from the background in a severe backlighting scene.

❖

DAY/NIGHT

It will be set automatically so it optimizes to the day or night conditions, respectively.

GAMING

❖

It will be set automatically to help you take a picture in a regular indoor lighting condition.

STANDARD ITS BACKLIGHT DAY/NIGHT GAMING

User setting
allowed

MODE OFF ATW2 OFF ATW2 OFF

User setting

RED

allowed

User setting

BLUE

allowed

MID

0

0

User setting
allowed

User setting
allowed

User setting
allowed

MID

0

0

User setting
allowed

User setting
allowed

User setting
allowed

20 – High Resolution Compact ATM Camera

21

How to use OSD Menu

CAMERA SETUP

<SCB-3020>

eCAMERA SETf

CAMERA ID OFF
VPS OFF
IRIS ELC
MOTION F.FAST
DNR MID
SHUTTER (OFF)--­SENS-UP AUTO X2
FLICKERLESS (OFF)--­XDR MID
 

d

c

DAY/NIGHT DAY
WHITE BAL 
DIGITAL ZOOM

OFF
DETAIL [2]
V-SYNC INT
AGC COLOR SUP
REVERSE OFF
POSI/NEGA +
PIP OFF
 

DIS OFF

 

22 – High Resolution Compact ATM Camera

MID

d

c

<SCB-2020>

eCAMERA SETf

CAMERA ID OFF
IRIS ELC
MOTION F.FAST
DNR MID
SHUTTER (OFF)--­SENS-UP AUTO X2
FLICKERLESS (OFF)--­XDR MID
 

DAY/NIGHT DAY
WHITE BAL 
DIGITAL ZOOM
DETAIL [2]
V-SYNC INT
AGC COLOR SUP
REVERSE OFF
POSI/NEGA +
PIP OFF
 

DIS OFF

 

Setup the general functions of zoom camera module.

Use the

cdef

d

c

OFF

MID

d

c

switch to select a menu item.

How to use OSD Menu

CAMERA ID [OFF, ON]

❖

CAMERA ID

ABCDEFGHIJKLMNOPQRSTUVWXYZ0
123456789 :?-+*()/

ffee

SP LOCATION

SP

CAMERA-1..................

...........................

 

The CAMERA ID menu is used for you to assign
a unique name to a camera. If you press the
SETUP switch with the CAMERA ID menu
selected, you will see the appropriate screen.
You can enter up to 54 alphanumeric or
special characters for the CAMERA ID. Select
LOCATION and press the SETUP switch to
move the display position of the CAMERA ID.

VPS [OFF, ON]

❖

If you set the VPS (Virtual Progressive Scan)
option, the camera will display the image in
progressive format.



Note :

For SCB-2020, the VPS option is not available.

–

In V-SYNC mode, video output may appear erroneous if

–

there is no L/L PULSE input.

In V-SYNC mode, you must enter L/L-PULSE; furthermore,

–

GND connection should be made for the device.

IRIS [ELC]

❖

The IRIS menu is used if you want to adjust the
intensity of radiation incoming to the camera.

•

ELC (Electronic Light Control)

①

If you press the SETUP switch when the ELC
submenu is selected, the corresponding screen
appears. You can make the ELC (Electronic Light
Control) function active or not.

LEVEL allows you to adjust the overall brightness;
the closer to “+” the level is, the brighter it gets while
the closer to “-” the level is, the darker it gets.

ELC

LEVEL [00]----I---­BACKLIGHT OFF

 

② If you set BACKLIGHT to BLC, you will see a menu

where you can specify the backlight compensation
area. Specify the backlight compensation area by
defi ning the area size and location.
If you use an ordinary camera to record a
backlighted scene, the object will be displayed
dark on the monitor. To solve this problem, use the
backlight compensation function. With this, you can
view a sharp video image even in a bright lighting.

23

How to use OSD Menu

Note :

ELC

LEVEL [00]----I---­BACKLIGHT BLC
AREA USER
<SIZE>
<LOCATION>

 

③

If you set the BACKLIGHT option to WDR, you will
see a menu where you can set the WDR options.

Specify the composition level in the WEIGHT menu.

You can also select any of OUTDOOR, and
INDOOR in WHITE BAL.

For ANTI ROLLING, select an option to reduce
the COLOR ROLLING effect.

ELC

LEVEL [ 00]----I---­BACKLIGHT WDR
WEIGHT MID
WDR LEVEL [ 0]----I---­ WHITE BAL INDOOR
ANTI ROLLING MID

 

WDR(Wide Dynamic Range) extends the gain
range of the screen that is mostly useful if you
take a simultaneous picture of both indoor and
outside of the window.
Namely, it improves the sharpness of the picture
in outdoor scenery as well as indoor.

24 – High Resolution Compact ATM Camera



If you use the VPS (Virtual Progressive Scan) function, the CCD

–

reads differently so you can not use WDR simultaneously.
If you set VPS to ON, WDR will be automatically set to OFF.

For SCB-2020, the WDR mode is not available.

–

AGC

❖

[OFF, VERY LOW, LOW, MID, HIGH, VERY
HIGH, USER, FIX]

The AGC (Auto Gain Control) menu is used to
set the AGC level of the camera. When the AGC
is active, the camera automatically increases the
sensitivity by amplifying the Video signal when the
strength of the signal falls below the normal value.

If OFF or FIX mode is selected in the SENS-UP
menu, you can specify the AGC level.

If you press the SETUP switch with a USER sub
menu selected, you will see the appropriate screen.

AGC USER

LEVEL [16]

 

In USER mode, you can break down the level in
16 steps from VERY LOW to VERY HIGH to your
preference.

How to use OSD Menu

AGC FIX

LEVEL [01]

 

If you press the SETUP switch with a FIX sub menu
selected, you will see the appropriate screen.

As a fi xed value of the AGC gain is used in FIX
mode, you can select one of the 16 detailed levels
from VERY LOW to VERY HIGH before fi xing it.



Note :

If the DAY/NIGHT menu of the CAMERA SET is set to AUTO,

–

the AGC menu will be deactivated.

If FLICKERLESS is set to ON, the AGC FIX mode will be

–

disabled.

❖

[S.SLOW, SLOW, NORM, FAST, F.FAST]

MOTION

The MOTION menu is used to adjust the strength
of the AGC level for a control of the camera motion.
This is available only if the SENS-UP menu is set
to AUTO.
You can select one from S.SLOW, SLOW, NORM,
FAST and F.FAST for the AGC level.

If you monitor a fast moving object in a low contrast
scene, select F.FAST while select S.SLOW for a
hardly moving object in the same lighting condition.

Note :



If the DAY/NIGHT menu of the CAMERA SET is set to AUTO,

–

the MOTION menu will be deactivated.

DNR

❖

❖

❖

[OFF,LOW,MID,HIGH, USER(1~16)]

You can confi gure the DNR (Digital Noise
Reduction) related settings.

Reduces the noise on the screen.
This is especially useful for a severely distorted
screen.

You can set the level if you set DNR to USER.

SENS-UP

[OFF, AUTO X2, AUTO X4, AUTO X6, AUTO X8,
AUTO X12, AUTO X16, AUTO X24, AUTO X32,
AUTO X48, AUTO X64, AUTO X96, AUTO X128,
AUTO X256, AUTO X512]

For brighter and clear video output, it automatically
extends capturing exposure under low illumination
circumstances such as night or insuffi cient lighting.

XDR (eXtended Dynamic Range)
[OFF, LOW, MID, HIGH]

Actively controls the gamma compensation in the
way it operates the ambient luminance contrast in a
certain pixel unit to determine the optimal visibility.

Select one from OFF, LOW, MID and HIGH.
Closing to HIGH will increase the compensation
level.

25

How to use OSD Menu

DAY/NIGHT

❖

DAY

•

If set to DAY, it will be fi xed to DAY mode regardless
of the ambient conditions.

•

NIGHT

If set to NIGHT, it will be fi xed to Black-and-White
mode regardless of the ambient conditions.
If you press the SETUP switch with a NIGHT sub
menu selected, you will see a menu where you can set
Burst to OFF/ON.
If BURST is set to ON, the Burst signal will output
together with the black-and-white composite video
signal. If BURST is set to OFF, the Burst signal does
not output.
You can set the BURST option to OFF/ON, or select
to output the Burst signal in NIGHT mode.

AUTO

•

The camera will automatically switch between
DAY and NIGHT mode, according to the lighting
condition.
If you press the SETUP switch with an AUTO-based
sub menu selected, you will see the appropriate
screen.

26 – High Resolution Compact ATM Camera

[DAY,NIGHT,AUTO]

BURST OFF
DAYÆNIGHT
BRIGHTNESS MID
DWELL TIME 2SEC
NIGHTÆDAY
BRIGHTNESS MID
DWELL TIME 5SEC
MASK AREA 1 2

 

You can set the BURST option to OFF/ON, or
select to output the Burst signal in NIGHT mode.
Brightness of DAYÆNIGHT sets the criterion for
switching color (C) to black&white (BW), selectable
from LOW, MEDIUM and HIGH. The lower the
setting (HIGH Æ LOW) is, the darker condition the
switching will be.

The DWELL TIME of DAYÆNIGHT is the criterion
of switching requirement.

Brightness of NIGHT Æ DAY sets the criterion for
switching black&white (BW) to color (C), selectable
from LOW, MEDIUM and HIGH. The lower the
setting (HIGH Æ LOW) is, the darker condition the
switching will be.

The DWELL TIME of NIGHT Æ DAY is the
criterion of switching requirement.

The MASK AREA menu is provided for preventing
switching failure or error which may be caused by
bright spot lighting source at night.

The MASK menu is used to prevent a fi lter switch
error or inability of determining the switch in
existence of a high spot light source at night.

AUTO

How to use OSD Menu

If you press the SETUP switch in item 1 or 2 of the
MASK menu, you will see a menu where you can

specify an area to mask.

MASK AREA
<SIZE> 
<LOCATION>

   

You can specify Mask 1 and 2 simultaneously.
The mask is used only for determining the switch and
any excessive bright area at night will be masked.

Note :



If BACKLIGHT is set to BLC, the MASK AREA function will

–

be deactivated.

WHITE BAL [DAY/NIGHT]

❖

If you want to adjust the color scheme, use the

WHITE BALANCE function.

DAY

•

In DAY mode, you can set the color values of RED
and BLUE. The screen will be displayed in colors
according to your settings.

WHITE BAL

DAY/NIGHT DAY
MODE AWC
RED [00]----I---­ BLUE [00]----I---­ R-GAIN [0128]
B-GAIN [0128]

 

Note :



You can set the values of R-GAIN and B-GAIN only in AWC mode.

–

NIGHT

•

Use the NIGHT mode if you want to set the white
balance differently according to the ambient luminance.

If the NIGHT mode is set to OFF, the white balance
will always operate as set in DAY mode; if not
to OFF, the camera will switch to as set in DAY/
NIGHT mode according to the brightness.

In NIGHT mode, you can set the values of RED,
BLUE and BRIGHTNESS. The screen will be
displayed in colors according to your settings.

WHITE BAL

DAY/NIGHT NIGHT
BRIGHTNESS MID
MODE AWC
RED [00]----I---­ BLUE [00]----I---­ R-GAIN [0128]
B-GAIN [0128]

 

27

How to use OSD Menu

DIGITAL ZOOM [ON/OFF]

Note :



You can set the values of R-GAIN and B-GAIN only in AWC

–

mode.

If AGC is set to OFF or FIX, you can not access the NIGHT

–

menu.

For adjusting the white balance, the following 5

–

modes are provided:

ATW1(Auto Tracing White Balance mode 1):

•

The camera can automatically adjust the color
temperature in real time, according to the ambient
conditions. The color temperature ranges from
approx. 2500K to 9300K.

ATW2: The color temperature ranges from

•

approx. 2,000K to 10,000K.

AWC ( Auto White Balance Control): If you

•

press the SETUP switch in the appropriate item
position, Auto White Balance will perform once.

3200K : Set color temperature to 3200K

•

5600K : Set color temperature to 5600K

•

RED : Adjusts the strength of the red color.

–

BLUE : Adjusts the strength of the blue color.

–

R-GAIN/B-GAIN : Enables you to set the current

–

color temperature manually.

BRIGHTNESS : Select a brightness level in

–

switching from setting in DAY mode to setting in
NIGHT mode.

28 – High Resolution Compact ATM Camera

❖

You can set the digital zoom factor and position.
If you press the SETUP switch with the DIGITAL
ZOOM function set to ON, you will see the
appropriate screen.

When the zoom factor and position are defi ned, the
digital zoom function will operate.

DIGITAL ZOOM

RATIO [X1.0]
<LOCATION>

 

- LOCATION : If you press the SETUP switch in the

condition where the image is enlarged as much as
the ratio setting, you can watch an invisible area of
the effective screen as well using the
switch.

Note :



If the digital zoom factor is set to larger than 1x, the FENCE

–

function will be deactivated.

The DIGITAL ZOOM function enlarges the pixel itself, which

–

can cause deterioration of the quality.

cdef

How to use OSD Menu

DETAIL [0~3]

❖

Controls the horizontal or vertical distinction.

V-SYNC [INT, LINE]

❖

Select the vertical sync mode for INT or LINE.

If you select INT, the camera will use the internal
synchronization.

If selecting LINE, the camera will use the external
power source frequency for the synchronization.

You can adjust the LL-PHASE.

AGC COLOR SUP [LOW , MID, HIGH]

❖

Adjust the color scheme according to the AGC
value.

REVERSE [OFF, H, V, H/V]

❖

Mirrors video signals horizontally, vertically, or both.

POSI/NEGA [+, -]

❖

Output as it is or mirror the video brightness signal.

❖

PIP [OFF, ON]

Displays a sub image together with the main image
on the same screen using the Picture In Picture
function.

Note :



If more than one privacy zone is set and the PRIVACY SET is

–

set to ON, the PIP function will be deactivated.

If the INTELLIGENCE function is set to FENCE mode, the PIP

–

menu will be deactivated.

DIS [OFF, ON]

❖

Digital Image Stabilization will set the anti-shake
compensation.

Note :



If you set DIS to ON, the compensation area will be enlarged

–

as set in the digital zoom factor.
If you set the digital zoom factor to greater than the enlarged
zoom factor for the compensation, the DIS function will be
deactivated.

29

How to use OSD Menu

ADVANCED [OFF, FIXED/MOVED, FENCE]

INTELLIGENCE

eINTELLIGENCEf

MOTION OFF
ADVANCED OFF
MASK AREA
DISPLAY ON
SENSITIVITY [3]
RESOLUTION [3]
ALARM OUT 

 

You can set the motion detection and tracking in the

INTELLIGENCE menu.

MOTION [OFF,TRACKING,DETECTION]

❖

TRACKING

•

Detects and tracks a moving object.

DETECTION

•

Detects a moving object.

Note :



If it is set to DETECTION, you can not set such functions as

–

FIXED/MOVED and FENCE in the ADVANCED menu.

1 2 3 4

❖

Detects a motion of an object and displays an image
of any moving object before tracking the moving
route.

•

FENCE

This is to detect if a moving object passes through
the specifi ed LINE or AREA.

In a condition where a moving object is detected
in an analysis of the previous and current frames
whose movement overlaps a certain area, the
system displays “PASS” if the object’s center line
passes through the line while it displays “ENTER” or
“EXIT” if the center point passes through the area.

LINE OFF
AREA OFF



You can set the position and detection direction of the
LINE, and the size and position of the AREA.

FENCE



How to use OSD Menu

- How to set the line

LINE

PIXEL LEVEL [4]
<POINT>
DIRECTION §¨





1 If you press the SETUP switch with the LINE

option set to ON, you can specify the position
and detection direction of the line.

2 If you change the PIXEL LEVEL for setting the

position, specify the pixel that moves by a single
pressure of the

3

In <POINT>, you can specify the fi rst position of

the line by pressing the SETUP switch once, and
the second position by pressing the switch again.
Use the
Set each position of the two points and press
the SETUP switch to complete the positioning.

4 If you change the DIRECTION, you can specify

the detection direction. The detection direction
based on the defi ned two points will be
displayed on the screen.

cdef

cdef

switch to specify the position.

switch.

- How to set the area



AREA
PIXEL LEVEL [4]
<SIZE> 
<LOCATION>

 

1 If you press the SETUP switch with the AREA

option set to ON, you can specify the position
and size of the area.

2 If you change the PIXEL LEVEL for setting the

position, specify the pixel that moves by a single
pressure of the

3 In <SIZE>, press the SETUP switch and use the

cdef

Press the SETUP switch again to complete
the sizing.

4 In <LOCATION>, press the SETUP switch

and use the
position.
Press the SETUP switch again to complete the
positioning.



cdef

switch.

switch to adjust the size.

cdef

switch to specify the

30 – High Resolution Compact ATM Camera

31

How to use OSD Menu

MASK AREA [1~4]

Note :



If you set the LINE of the FENCE to ON, PRIVACY 12 will not

–

be available.
Functions of FENCE, PIP, DIS and DIGITAL ZOOM (if the
digital zoom factor is set to larger than 1x) can not be used
simultaneously.

In the boundary of the defi ned AREA and LINE, a FENCE

–

detection error may occur if two or more moving objects
overlap with each other or one object separates in multiple
directions.

•

FIXED/MOVED

If an object on the screen suddenly disappears or an
object comes out of nowhere and stays for a certain time,
the area will be displayed.

A detection (FIXED/MOVED) error may occur if :

- multiple motions occur continuously in random
directions

- a fi xed object moves in one position continuously

- a second object screens the fi rst moving object

❖

Specify a detection exception area to mask.
Select a mask number and specify the size and
position.

<SIZE> 
<LOCATION>

   

DISPLAY [ON, OFF]

❖

With the DISPLAY option set to ON, a motion or
a set ADVANCED function will be displayed on
the screen, if detected.

SENSITIVITY [1~7]

❖

Set the sensitivity of the motion detection.

RESOLUTION [1~5]

❖

If setting it to high, the camera can detect even a
trivial movement of the target.



MASK AREA

How to use OSD Menu

ALARM OUT

❖

If you set a desired menu item to ON, the camera
will sound an alert if it detect the appropriate
motion.



ALARM OUT

MOTION ON
FIXED/MOVED ON
FENCE
LINE ON
AREA
ENTER ON
EXIT ON

 

PRIVACY ZONE SETUP

ePRIVACY ZONEf

1 2 3 4 5 6
7 8 9 10 11

PRIVACY SET ON
STYLE

 

The PRIVACY function will protect your privacy by
screening the privacy area that you have specifi ed
during monitoring. You can specify up to 12 privacy
zones.

If you set the PRIVACY SET to ON, your PRIVACY
ZONE settings will be applied.

You can change the style to adjust the mosaic size and
color of the PRIVACY ZONE.

ePRIVACY ZONEf

1 2 3 4 5 6
7 8 9 10 11

PRIVACY SET ON
STYLE COLOR
Y-LEVEL [55]
RED [55]
BLUE [55]



12

MOSAIC1

12



32 – High Resolution Compact ATM Camera

33

How to use OSD Menu

Use the

cdef

1 through 12.

Select one from PRIVACY 1~12 and press the SETUP
switch to confi rm your setting. You can specify a pixel
that moves as you change the PIXEL LEVEL to set
the position.

- How to set the point

You can set each position of the 4 points.

1 If you press the SETUP switch in <POINT>,

2 Use the

switch to select one from PRIVACY

PRIVACY ZONE SET1

PIXEL LEVEL [4]
<POINT>
<POSITION>

   

you will see the points available in the PRIVACY
ZONE. Each time you press the SETUP switch,

the points available will move.

cdef

each point. Set each position of the four points
and press the SETUP switch to complete the
positioning.

switch to set the position of

- How to set the position

You can move the position of the overall area.

1

By pressing the SETUP switch in <POSITION>,
you can move the overall position of the privacy
zone.

2

Use the

cdef

and press the SETUP switch to confi rm it.

Note :



If more than one PRIVACY ZONE is specifi ed and the PRIVACY

–

SET is set to ON, the PIP function will be deactivated.

If the 12th PRIVACY ZONE is specifi ed, the LINE function of

–

FENCE will be deactivated.

switch to move the position

How to use OSD Menu

OTHER SET

<SCB-3020>

eOTHER SETf

EXTERNAL TRG OFF
FACTORY DEFAULTS
OSD COLOR BW

 

<SCB-2020>

FACTORY DEFAULTS 
OSD COLOR BW

 

EXTERNAL TRG

❖

Set the EXTERNAL TRG menu to ON and press the
SETUP switch to display the appropriate screen.



eOTHER SETf

EXTERNAL TRG

STILL TIME OFF
DELAY TIME FIX

 

You can set the STILL TIME to 1~4 seconds.

If DELAY TIME is set to FIX, the DELAY TIME will be
set in sync with the STILL TIME if set to USER, the
DELAY TIME will be set to your setting.

Note :



If VPS is set to OFF, the EXTERNAL TRG menu will be

–

deactivated.

If the external signal is received when the lighting control is not

–

stable, this may cause an error.

SCB-2020, the VPS and WDR mode are not available.

–

❖

FACTORY DEFAULTS

All the settings will be restored to the factory default.

OSD COLOR [BW, R/G/B]

❖

You can set the OSD(On-screen Display) color to
COLOR or B/W.

34 – High Resolution Compact ATM Camera

35

How to use OSD Menu

Initial Confi guration Table

SYSTEM INFORMATION

eSYSTEM INFOf

TYPE 3_ATM_WDR_P
SERIAL NO.
CAMERA VER. V1.00_100528

 

You can view the system information including the
serial number and camera version.

000000000000000

❖

Camera Confi guration

•

CAMERA ID OFF

VPS OFF

IRIS ELC

AGC VERY HIGH

MOTION F.FAST

DNR MID

SHUTTER (OFF)

SENS-UP

AUTO x2

FLICKERLESS (OFF)

XDR MID

DAY/NIGHT DAY

DIGITAL ZOOM OFF

DETAIL [2]

AGC COLOR SUP MID

REVERSE OFF

POSI/NEGA +

PIP OFF

DIS OFF

V-SYNC INT

 VPS is only available with SCB-3020.

Specifi cations

SPECIFICATIONS

Items

POWER

Input Voltage DC12V

Power Consumption Max. 2.0W Max. 1.6W

Video

Imaging Device 1/3” Vertical Double Density Interline CCD 1/3” Super HAD CCD ii

Total Pixels 795(H) x 596(V)

Effective Pixels 752(H) x 582(V)

Scanning System 2 : 1 Interlace

Synchronization Internal/Line lock (L-Pulse input)

Frequency

Horizontal Resolution Color : 600 TV Lines

Min. Illumination

S / N (Y signal) 52dB (AGC off, Weight on)

Video Output CVBS : 1.0 Vp-p / 75Ω composite

Lens

Zoom Ratio Fixed

Focal Length 3.7mm

Max. Aperture Ratio F2.0

Angular Field of View D : 80.81°, H : 64.65°, V : 48.49 °

SCB-3020P SCB-2020P

H : 15.625KHz / V : 50Hz

Color : 0.45 Lux (50IRE@F2.0, Sens-up 2x) Color : 0.15 Lux (50IRE@F2.0, Sens-up 2x)

36 – High Resolution Compact ATM Camera

37

Specifi cations

Items

Operational

On Screen Display Chinese

Camera Title Off / On ( Displayed 54 characters )

Day & Night Color / B/W / Auto / Extern

Backlight Compensation Off / On / WDR Off / On

Wide Dynamic Range 160x (54dB)

XDR Off/LOW/MID/HIGH

Digital Noise Reduction
(2D+3D)

Digital Image Stabilization On / Off

Motion Detection Built-in

Privacy Function On / Off (12 Areas, Polygonal Type)

Sens-up (Frame
Integration)

Gain Control Off / On

White Balance ATW1 / ATW2 / AWC(Manual) / 3200°K / 5600°K

Electronic Shutter Speed 1/50 ~ 1/200,000

Digital Zoom

Flip / Mirror On / Off

Profi le Standard / ITS / Backllight / Day & Night / Gaming / Custom

VPS Built-in

Intelligent Video DETECTION / TRACKING / FIXED_MOVED / FENCE

38 – High Resolution Compact ATM Camera

SCB-3020P SCB-2020P

On / Off

Auto / Off (Selectable x2 ~ x512)

On / Off (2x ~ 16x)

-

Specifi cations

Items

PIP On / Off

Alarm 1 Output

Communication Coaxial Control by SPC-300 (Option)

ENVIRONMENTAL

Operating Temperature /
Humidity

MECHANICAL

Dimension

Weight 105g



The specifi cation for this product may change without prior notice for product improvement.

SCB-3020P SCB-2020P

-10°C ~ +50°C (+14°F ~ +122°F) / Less than 90% RH

55 x 42 x 52mm

39

MEMO MEMO

MEMO MEMO

SALES NETWORK

SAMSUNG TECHWIN CO., LTD.

Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400
TEL : [phone]~60, FAX : [phone]

SAMSUNG TECHWIN AMERICA Inc.

1480 Charles Willard St, Carson, CA 90746, UNITED STATES
Tol Free : [phone], FAX : [phone]
www.samsungcctvusa.com

www.samsungsecurity.com
www.samsungtechwin.com

SAMSUNG TECHWIN EUROPE LTD.

Samsung House, 1000 Hillswood Drive, Hillswood Business
Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS
TEL : [phone], FAX : [phone]