Samsung SCB-1000 User Manual

Low Light, High Resolution,
Day & Night Camera

User Manual

SCB-1000

Low Light, High Resolution, Day & Night Camera

User Manual

Copyright
©2010 Samsung Techwin Co., Ltd. All rights reserved.

Trad e mark

is the registered logo of Samsung Techwin Co., Ltd.
The name of this product is the registered trademark of Samsung Techwin Co., Ltd.
Other trademarks mentioned in this manual are the registered trademark of their respective company.

Restriction

Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this document
shall be reproduced, distributed or changed, partially or wholly, without formal authorization of Samsung Techwin.

Disclaimer

Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but
no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on
the user’s own responsibility. Samsung Techwin reserves the right to change the contents of this document
without prior notice.

Warranty

If the product does not operate properly in normal conditions, please let us know. Samsung Techwin will resolve
the problem for free of charge. The warranty period is 3 years. However, the followings are excluded:

If the system behaves abnormally because you run a program irrelevant to the system operation.
Deteriorated performance or natural worn-out in process of time

•

•

B
T

■

■

Before operating the camera, confirm the camera model and correct input power voltage.
To help you understand this manual thoroughly, we’ll introduce our model description.

■ SCB-1000 SERIES

• NTSC MODEL • PAL MODEL
SCB-1000ND SCB-1000PD
SCB-1000NA SCB-1000PA
SCB-1000PH

■ MODEL DESCRIPTION

• SCB-1000X X

_ _

SIGNAL SYSTEM

• SIGNAL SYSTEM
N → NTSC MODEL
P → PAL MODEL

• POWER SOURCE
D → DC 12V
A → AC 24V~
H → AC 230V~

POWER SOURCE

4_ safety information

safety information

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates that dangerous voltage consisting a risk of electric

shock is present within this unit.

This exclamation point symbol is intended to alert the user to the presence

of important operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

WARNING

To prevent damage which may result in fi re or electric shock hazard, do not expose this
appliance to rain or moisture.

To prevent injury, this apparatus must be securely attached to the fl oor/wall in accordance
with the installation instructions.

WARNING

Be sure to use only the standard adapter that is specifi ed in the specifi cation sheet.
Using any other adapter could cause fi re, electrical shock, or damage to the product.

Incorrectly connecting the power supply or replacing battery may cause explosion, fi re,
electric shock, or damage to the product.

Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause
abnormal heat generation or fi re.

Securely plug the power cord into the power receptacle. insecure connection may cause
fi re.

When installing the camera, fasten it securely and fi rmly. The fall of camera may cause
personal injury.

•

•

1.

2.

3.

4.

5.

C

6

7

8

9

1

1

2

3

4

5

6

7

8

9

1

English_5

● SAFETY INFORMATION

c

e
e

Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers
fi lled with water on top of the camera. doing so may cause personal injury due to fi re,
electric shock, or falling objects.

Do not install the unit in humid, dusty, or sooty locations. doing so may cause fi re or
electric shock.

If any unusual smells or smoke come from the unit, stop using the product. in such case,
immediately disconnect the power source and contact the service center. continued use in
such a condition may cause fi re or electric shock.

If this product fails to operate normally, contact the nearest service center. never
disassemble or modify this product in any way. (samsung is not liable for problems caused
by unauthorized modifi cations or attempted repair.)

When cleaning, do not spray water directly onto parts of the product. doing so may cause

fi re or electric shock.

CAUTION

Do not drop objects on the product or apply strong shock to it. Keep away from a location
subject to excessive vibrationor magnetic interference.

Do not install in a location subject to high temperature (over 50°C), low temperature (below

-10°C), or high humidity. Doing so may cause fi re or electric shock.

If you want to relocate the already installed product, be sure to turn off the power and then
move or reinstall it.

Remove the power plug from the outlet when then there is a lightning. Neglecting to do so
may cause fi re or damage to the product.

Keep out of direct sunlight and heat radiation sources. It may cause fi re.

Install it in a place with good ventilation.

Avoid aiming the camera directly towards extremely bright objects such as sun, as this
may damage the CCD image sensor.

Apparatus shall not be exposed to dripping or splashing and no objects fi lled with liquids,
such as vases, shall be placed on the apparatus.

The Mains plug is used as a disconnect device and shall stay readily operable at any time.

Do not expose the camera to radioactivity. Radioactivity exposure may damage the CCD.

6.

7.

8.

9.

10.

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

safety information

6_ safety information

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions :

This device may not cause harmful interference, and
This device must accept any interference received including interference that may cause
undesired operation.

CAUTION

This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.

IC Compliance Notice

This Class A digital apparatus meets all requirements of the Canadian
Interference.-Causing Equipment Regulations of ICES-003.

1)

2)

Correct disposal of batteries in this product

(Applicable in the European Union and other European countries with separate battery return systems.)

This marking on the battery, manual or packaging indicates that the batteries in this product should not be
disposed of with other household waste at the end of their working life. Where marked, the chemical symbols
Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC
Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health
or the environment.

To protect natural resources and to promote material reuse, please separate batteries from other types of waste
and recycle them through your local, free battery return system.

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)

This marking on the product, accessories or literature indicates that the product and its electronic accessories
(e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their
working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal,
please separate these items from other types of waste and recycle them responsibly to promote the sustainable
reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government
office, for details of where and how they can take these items for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

i

m

1

2

3

4

5

6

7

8

9

1

1

1

1

1

English_7

● SAFETY INFORMATION

o

e

important safety instructions

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.

Do not install near any heat sources such as radiators, heat registers, or other apparatus
(including amplifi ers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong is provided for your safety. If
the provided plug does not fi t into your outlet, consult an electrician for replacement of the
obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories specifi ed by the manufacturer.

Use only with cart, stand, tripod, bracket, or table specifi ed by the

manufacturer, or sold with the apparatus.

Unplug this apparatus when a card is used. Use caution when moving

the cart/ apparatus combination to avoid injury from tip-over.

Refer all servicing to qualifi ed service personnel. Servicing is required when the apparatus

has been damaged in any way, such as powersupply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.

Apparatus shall not be exposed to dripping or splashing and no objects
fi lled with liquids, such as vases, shall be placed on the apparatus

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

8_ contents

INTRODUCTION

9

9

Features

10

What’s included

11

Component names and functions

13

Lens

CONNECTION

16

16

Connecting to a monitor

16

Connecting to power

CAMERA OPERATION

18

18

Menu

18

Settings

TROUBLESHOOTING

28

28

Troubleshooting

contents

SPECIFICATIONS

30

30

Specifi cations

F

y

y

y

y

y

y

y

y

y

i

English_9

● INTRODUCTION

s

FEATURES

Horizontal Resolution 540 TV Lines

Clear image quality has been achieved by employing a CCD with 410,000 pixels
(NTSC), 470,000 pixels (PAL), which provides a horizontal resolution of 540 TV
lines.

Electronic DAY & NIGHT

This camera has a function that electronically selects the mode that is appropriate
for daytime or night-time conditions.
The COLOR mode operates in daytime conditions to provide optimum colors, and
BW mode operates in night-time conditions to enhance the defi nition of the image.

Electronic IRIS

The electronic IRIS function enables continuous automatic control of the shutter
between 1/60(1/50)~1/120,000 seconds.

PRIVACY Function

The PRIVACY function conceals the areas you do not wish to appear on the
screen.

VIDEO/DC Drive Lens

The video drive lens and the DC drive lens can be selected by the touch of a
switch.

High Sensitivity

The built-in high sensitivity COLOR CCD enables a clear image even in 0.3lux or
lower illumination.

SSNR (Samsung Super Noise Reduction)

By using built-in SSNR function manufactured by SAMSUNG TECHWIN, the amount
of low illuminance noise has been signifi cantly reduced, and the signal-to-noise ratio
(S/N) as well as horizontal resolution have been improved, resulting in a clear and
sharp image display even in the dark.

Controlled by OSD Menu

The camera can be controlled by selecting text displayed on the monitor screen.

- ENGLISH, PORTUGUESE

Additional Functions

SENS-UP, MOTION DETECTION, MIRROR, SHARPNESS and SYNC(INT/LL)
functions are also available.

y

y

y

y

y

y

y

y

y

introduction

10_ introduction

introduction

WHAT’S INCLUDED

Check if the following items are included in the product package.

Low Light, High Resolution,
Day & Night Camera

User Manual

SCB-1000

Low Light, High Resolution,
Day & Night Camera

Quick Set-up Guide

SCB-1000

SCB-1000 User Manual

Quick Set-up Guide

Auto iris lens connection plug

C-Mount adaptor

C

F

English_11

● INTRODUCTION

COMPONENT NAMES AND FUNCTIONS

❶

CCD protection cap : Please cover the CCD SENSOR when not using it.

❷

C-Mount lens adaptor : Please attach the C-Mount lens here.

❸

CS-Mount lens adaptor : Please remove the C-MOUNT lens adaptor and then attach it.

❹

Back Focus clamp screw : Please loosen the clamp screw with a screwdriver before

adjusting the Back Focal length.

❺

Auto iris lens connector

➊ ➋➌ ➍

➍

FRONT VIEW SIDE VIEW

BOTTOM VIEW

❻

Mounting bracket screw hole

1/4”-20 UNC (20 THREAD)
L:4.5mm±0.2mm (ISO standard),
or 0.197” (ASA standard)

L

Please use the screw
hole when fixing the
camera onto the mounting
bracket. Please use the
clamp screw as specified
below.

➏

※

The mounting bracket can be separated and attached to the

top of the camera.
In this instance please do not tighten the screw to a depth of
more than 4mm, otherwise serious damage can occur to the
inside of the camera.

This camera package does not include the mounting bracket. Please refer to the user’s manual
for installation of the mounting bracket.



12_ introduction

introduction

L

L
l

e

REAR VIEW

➐

Video output terminal : Sends video signal and connects to the video input terminal of

the monitor.

➑

Auto iris lens selection switch : Please change the mode to DC or VIDEO depending

on the type of auto iris lens being used.

➒

Setting button:

• SETUP button : Displays the menu on the screen and uses enter sub menu.

• Up&Down button : Used to move the cursor up or down in the menu screen.

• Left&Right button :Used to move the cursor left or right in the menu screen.

❿

Power input terminal : Connects to the power appropriate to each model.

⓫

Power lamp : Lights up when the correct power is supplied to the camera.

⓫

➐

➒

❿

➑

* High Voltage Type

(SCB-1000PH)