Samsung VCC88B0H1K, SC88B Series User Manual

imagine the possibilities

Thank you for purchasing a Samsung product.
To receive more complete service,
please register your product at

www.samsung.com/register

Vacuum Cleaner

user manual

✻ Before operating this unit, please read the instructions carefully.
✻ For indoor use only.

English

SC88B* series

This manual is made with 100% recycled paper.

2_ safety information

safety information

SAFETY INFORMATION

• Before operating the appliance, please read this manual thoroughly and retain

it for your reference.

• Because the following operating instructions cover various models, the

characteristics of your vacuum cleaner may differ slightly from those
described in this manual.

CAUTION/WARNING SYMBOLS USED

WARNING

Indicates that a risk of death or serious injury exists.

CAUTION

Indicates that a risk of personal injury or material damage exists.

OTHER SYMBOLS USED

Represents something you must NOT do.

Represents something you must follow.

Indicates that you must disconnect the power plug from the socket.

This vacuum cleaner is designed for domestic household use only. Do not use this
vacuum cleaner to clear building waste or debris. Do not use this vacuum cleaner with
any of the filters removed as this could cause damage to the internal components and
void your warranty.

SAVE THESE INSTRUCTIONS

POLARIZED PLUG INSTRUCTIONS

- To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than
the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper
outlet. Do not change the plug in any way.

WARNING

WARNING

WARNING

safety information _3

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, you should always follow these basic precautions:

READ ALL INSTRUCTIONS BEFORE USING YOUR CANISTER VACCUM

WARNING – To reduce the risk of fire, electric shock, or injury:

1. Do not leave the appliance unattended when it is plugged in. Unplug from the outlet
when not in use and before servicing.

2. Do not use outdoors or on wet surfaces.

3. Do not allow the vacuum to be used as a toy. Pay close attention when the vacuum is
used by or near children.

4. Use only as described in this manual. Use only manufacturer’s recommended
attachments.

5. Do not use with a damaged cord or plug. If the appliance is not working as it should,
has been dropped, damaged, left outdoors, or dropped into water, bring it to a service
center.

6. Do not pull or carry by the cord, use the cord as a handle, close a door on the cord, or
pull the cord around sharp edges or corners. Do not run appliance over the cord.
Keep the cord away from heated surfaces.

7. Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.

8. Do not handle the plug or appliance with wet hands.

9. Do not put any object into openings. Do not use with any opening blocked.
Keep free of dust, lint, hair, and anything that may reduce air flow.

10. Keep hair, loose clothing, fingers, and all parts of your body away from openings and

moving parts.

11. Turn off all controls before unplugging.

12. Use extra care when cleaning on stairs.

13. Do not use to pick up flammable or combustible liquids, such as gasoline, or use in

areas where they may be present.

14. Do not pick up anything that is burning or smoking, such as cigarettes, matches, or

hot ashes.

15. Do not use without the dirt cup and/or filters in place.

16. Do not use the vacuum cleaner in an enclosed space filled with vapors given off by oil

base paint, paint thinner, some moth proofing substances, flammable dust, or other
explosive or toxic materials.

17. Do not pick up hard or sharp objects such as glass, nails, screws, coins, etc.

18. Hold the plug when rewinding onto the cord reel. Do not allow the plug to whip when

rewinding.

safety information

4_ contents

contents

ASSEMBLING THE VACUUM

05

05 Assembling the vacuum

ASSEMBLING THE VACUUM

06

06 Power cord
06 On/Off switch
07 Power control

MAINTAINING THE TOOLS AND

FILTERS

08

08 Using accessories
09 Maintaining floor tools
10 Emptying the dust bin
11 Cleaning the dust pack
13 Cleaning the outlet filter

13 Changing the battery

TROUBLESHOOTING

14

assembling the vacuum _5

01 ASSEMBLING THE VACUUM

assembling the vacuum

• Please do not push the button of

the dust bin handle when carrying
the machine. (See page 10.)

• When storing, park the oor nozzle.

OPTIONS

6_ operating the vacuum

operating the vacuum

POWER CORD

ON/OFF SWITCH

• When removing the plug from the electrical outlet, grasp the

plug, not the cord.

CAUTION

operating the vacuum _7

02 OPERATING THE VACUUM

POWER CONTROL

1. Vacuum cleaner ON/OFF( )

Press the ON/OFF button to operate the

vacuum cleaner. Press again to stop the
vacuum cleaner.

2. Vacuum cleaner (+, -)

Press the (+) button to operate the vacuum

at high suction power. Press the (-) button to
operate the vacuum at low suction power.

Don’t cover the handle transmitter when you
use a handle control button.

INFRARED REMOTE-CONTROL

- HOSE

Handle Control

The cleaner is controlled by infrared

signals.

transmitter

- BODY

Press the power ON/OFF button repeatedly to start
and to stop the vacuum cleaner.
(OFF → ON → OFF)

If the remote handle control is not working, the
cleaner can be operated using the ON/OFF
button on the body of the machine.

1

The ON/OFF button operates the vacuum cleanner or stops it.

2

The INFRARED light indicates the part that receives the infra-red
signal from the handle control.

3

The filter light is illuminated when the dust pack requires checking or
emptying. An audio signal will also sound.

1

3 2

8_ maintaining the tools and filters

maintaining the tools and filters

USING ACCESSORIES

PIPE

• Adjust the length of the telescopic pipe by sliding

the length control button located in the center of the
telescopic pipe back and forth.

• To check for blockages, separate the telescopic pipe

and adjust to shorten. This allows for easier removal of
waste clogging the tube.

ACCESSORIES (OPTIONAL)

• Push the accessory onto the end of

the hose handle.

• Pull out and turn the dusting brush

to clean delicate areas.

• To use the upholstery tool, push the

accessory onto the end of the hose
handle.

maintaining the tools and filters _9

03
MAINTAINING THE TOOLS AND FILTERS

MAINTAINING FLOOR TOOLS

2-STEP BRUSH (OPTION)

• Adjust the inlet lever according to the floor surface.

• Remove waste matter completely from the inlet if the inlet is blocked.

Carpet Cleaning Floor Cleaning

•

Vacuums dust in a wide area at once.

•

Remove waste matter completely
from the inlet if the inlet is blocked.

PARQUET MASTER BRUSH (OPTIONAL)

10_ maintaining the tools and filters

EMPTYING THE DUST BIN

Once dust reaches the dust
full mark, empty the dust bin.

Take the dust bin out by
pushing the dust bin button,
and then lifting the dust bin out.

Separate the dust bin cover.

Throw the dust in the bin
away.

Close the dust bin cover.

Before use, push the dust
bin into the main body of
the vacuum cleaner until
you hear a “click” sound.

4 5 6

1 2 3

Rinse the dust bin with
cold water only.

- To empty into a plastic bag:
(recommended for asthma/allergy sufferers)

maintaining the tools and filters _11

03
MAINTAINING THE TOOLS AND FILTERS

If suction is noticeably and continuously reduced or the vacuum cleaner overheats
abnormally, please clean the dust pack.

CLEANING THE DUST PACK

WHEN TO CLEAN THE DUST PACK

• The lamp will turn red when suction is reduced.

If the light comes on, please clean the dust pack.

• If the filter check indicator turns red with the inlet held

10cm (4 inches) above a flat floor, clean the dust pack.

• Turn the vacuum power

to ‘MAX’.

Handle Control

Body Control

TO CONFIRM THE DUST PACK NEEDS CLEANING

12_ maintaining the tools and filters

Make sure the filter is completely dry
before putting it back into the vacuum
cleaner. Allow 12 hours for it to dry.

CLEANING THE DUST PACK

1

4

7

10

2

5

8

11 12

3

Remove the dust bin.

Separate the dust bin cover
from the dust bin.

Before reassembly, align the
dust pack cover and dust
pack correctly.

Close the dust bin cover.

Before use, push the dust
bin into the main body of
the vacuum cleaner until
you hear a “click” sound.

Remove the fixed frame of
the dust pack cover.

Separate the dust pack
from the dust bin cover.

Let the sponge and filter dry
in the shade for more than 12
hours.

Put the sponge and filter into
the dust pack.

Remove the sponge and filter
from the dust pack.

Shake the sponge and filter over
a garbage can to remove loose
dust, then wash the sponge and
filter of the dust pack with water.

Put the assembled dust pack
into the cover.

6

9

maintaining the tools and filters _13

03
MAINTAINING THE TOOLS AND FILTERS

CHANGING THE BATTERY

1. If the vacuum cleaner does not work, replace the batteries in the handle.
If the problem persists, please contact an authorized dealer.

2. Use 2 AAA batteries.

1. Never disassemble or recharge the batteries.

2. Never heat up the batteries or throw them into a fire.

3. Do not reverse the (+), (-) poles.

4. Dispose of the batteries property.

WARNING

BATTERY TYPE : AAA Size

CLEANING THE OUTLET FILTER

1 2

Press the fixed frame part at the back of
the main body to remove.

Remove the dust bin and HEPA Filter as
shown.

Clean the HEPA filter. If cleaning
the filter does not resolve the
problem, replace the filter.

• When suction is noticeably and

continuously reduced or the vacuum
cleaner overheats abnormally, please clean
the outlet filter.
Note : Do not wash the HEPA filter. If
cleaning does not resolve the problem,
please replace the blocked filter.

• Replacement lters are available at your

local Samsung distributor.

14_ troubleshooting

troubleshooting

PROBLEM SOLUTION

Motor does not start

• Check the cable, plug, and socket.

• Let cool.

Suction force is gradually
decreasing

• Check for a blockage and remove.

Cord does not rewind
fully

• Pull the cord out 2-3m (6.5 - 9.75 ft.) and push the cord
rewind button.

Vacuum cleaner does not
pick up dirt

• Check the hose and replace if necessary.

Low or decreasing
suction

• Please check the lters and, if needed, clean as illustrated
in the instructions. If the lters are clogged and cannot be
cleaned, replace with new ones.

Body overheating

• Please check the lters. If needed, clean as illustrated in the
instructions.

Static electricity
discharge

• Please decrease power suction.

• This can also occur when the air in the room is very dry.
Please ventilate the room to increase the humidity.

memo