Page 1
Operating Instructions
VACUUM CLEANER
❈ Before operating this unit, please read the instructions carefully.
❈ For indoor use only.
Register your product at www.samsung.com/global/register
Page 2
IMPORTANT SAFEGUARDS
1. Read all instructions carefully. Before switching on, make sure that the voltage of
your electricity supply is the same as that indicated on the rating plate on the
bottom of the cleaner.
2. WARNING : Do not use the vacuum cleaner when rug or floor is wet.
Do not use to suck up water.
3. This appliance is not intended for use by young children or infirm persons unless
they have been adequately supervised by a responsible person to ensure that
they can use the appliance safely. Young children should be supervised to ensure
that they do not play with the appliance.
4. Do not use the vacuum cleaner without the dust bag. Empty the dust bag before it
is full in order to maintain the best efficiency.
5. Slide to the Stop (or Min)position before inserting a plug into the electrical outlet.
6. Do not use the vacuum cleaner to pick up matches, live ashes or cigarette butts.
Keep the vacuum cleaner away from stoves and other heat sources. Heat can
deform and discolour the plastic parts of the unit.
7. Avoid picking up hard, sharp objects with the vacuum cleaner as they may
damage the cleaner parts. Do not stand on the hose assembly. Do not put a
weight on the hose. Do not block the suction or the exhaustion part.
8. Switch the vacuum cleaner off at the machine before unplugging from the
electrical outlet. Grasp the plug to disconnect cord from the electrical outlet
before caring the dust bag and filters.
9. The plug must be removed from the socket out-let before cleaning or maintaining
the appliance.
10. The use of an extension cord is not recommended.
11. If your vacuum cleaner is not operating correctly, switch off the power supply and
consult an authorized service agent.
12. If the supply cord is damaged, it must be replaced by the manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard.
13. The vacuum cleaner is provided with a self-resetting thermal cut-out protection
which automatically shut off current on over heating. Overheating can be
caused by blockage in the filter, nozzle, tube or hose. After removing the cause
and cooling the motor, vacuum cleaner automatically start again.
1
Page 3
ASSEMBLING THE CLEANER
1
OPTION
OPTION
Features may vary according to model.
▼
OPTION
Parking floor nozzle for easier storage.
2
Page 4
OPERATING THE CLEANER
2
2-1 POWER CORD 2-2 ON/OFF SWITCH
(BODY CONTROL TYPE ONLY)
NOTE
Grasp the plug to
disconnect cord from
the electrical outlet.
2-3 POWER CONTROL
1) HANDLE CONTROL TYPE
• SLIDE TO THE STOP POSITION
Vacuum cleaner switches off. (stand by mode)
• SLIDE FORWARD TO MAX
Suction capacity increase smoothly up to maximum.
2) BODY CONTROL TYPE
MIN =
For delicate surface e. g. net curtains.
MAX =
For hard floors and heavily soiled carpets.
HANDLE CONTROL TYPE ONLY
BODY CONTROL TYPE ONLY
2-4 AIR CONTROL
To reduce suction for cleaning draperies, small
rugs, and other light fabrics, pull the tap air
until the hole is open.
BODY CONTROL TYPE ONLY
3
Page 5
2-5 USING FLOOR TOOLS
Carpets
Bare floors
CREVICE
DUSTING
OPTION
OPTION
Brush for
blanket
Detach transparent drum cover for easy cleaning.
Clogs on turbine keeps brush from turning, and in this case, take care of it.
Remove waste
matter
completely when
inlet is blocked.
Turn the lock button to
‘UNLOCK’, and
remove waste matter.
To reassemble, align the cover
to the front of the main body and
close. After closing the cover,
ensure that the lock button is
turned to the ‘LOCK’ position.
Warning : Use for bedclothes only. Be cautious not to damage brush during unclogging.
4
Page 6
DUST FULL INDICATOR
3
CHANGING THE DUST BAG
4
1 2
If the "DUST FULL" indicator turns to red color while you
are cleaning, the dust bag requires replacement
NOTE : If the "DUST FULL" indicator continues to display red
color even after having changed bag into new one, turn
the cleaner off and check if there is any clogging in the
hose, tube, floor nozzle, or on the inlet/ outlet filter.
3
4 5
FOR TEXTILE FILTER BAG
If the textile filter bag gets
full after using, clean the
textile filter bag and use it
again.
CLEANING THE CYCLONE FILTER(Optional)
5
123
456
5
VP-95B
TYPE
OPTIONAL
Page 7
CLEANING THE INLET FILTER
6
123
NOTE :Regularly check if the filter gets clogged and if so, remove the dust particles from the
filter as filter clogging may cause the damage on the motor or suction decrease.
OUTLET FILTER
7
123
HEPA FILTER(option)
- IF YOU HAVE A PROBLEM
PROBLEM CAUSE REMEDY
Motor does not start.
Suction force is gradually
decreasing.
Cord does not rewind fully. Check that the cord is not
Vacuum cleaner does not
pick up dirt.
This Vacuum cleaner is approved the following.
EMC Directive : 89/336/EEC, 92/31/EEC and 93/68/EEC
Low Voltage Safety Directive : 73/23/EEC and 93/68/EEC
No power supply.
Thermal cut-out.
Nozzle, suction hose or tube
is blocked.
twisted or wound unevenly.
Crack or hole in hose.
6
MICRO FILTER(option)
Check cable, plug and
socket.
Leave to cool.
Remove the object and
change the dust-bag.
Pull the cord out 2-3m and
push down the cord rewind
button.
Check hose and replace if
required.
Page 8
DJ68-00348A REV(1.0)
Loading...