Samsung SBP-B-100HM, SBP-B-100P User Manual
INSTALLATION MANUAL – SBP-B-100x Hanging Mount and Gang Box Adapters
Figure 1 - Camera Base with
Cover Removed. Camera
components (black parts) not
shown in following images.
Figure 2 - Hanging Mount Cap
Kit w/ ¾-in Fitting
Figure 4 - Hanging Mount Cap
Kit w/ ¼-20 Fitting
Figure 3 - Single Gang Box
Converter Plate
Not Included,
part of Gang
Box Kit
Not Included, part
of Gang Box kit
Flat Head
Screws
Pan
Head
Screws
¼-20
Adapter
Plate
Pan
Head
Screws
Adapter
(3/4-in
shown)
Plate
Camera
Base
Cap
Camera
Cover
Camera
Cover
Camera
Base
Figure 5 - Plate Close Up
Stud used in SBP-B-100HM Only
Use these holes (2) to attach
Plate to Gang Box
Use tapped holes to attach
Camera Base to Plate
Use these holes (2) to attach
Plate to Cap
Holes (3) for Cable pass-through
Compatible Model List
SNV-6013, SND-6011R, SCD-2080/B/E/EB, SCD-2082, SCD-2080R,
SCD-2042R, SCD-2022R, SCD-2020R, SCD-3080/B, SCD-3083
Unpacking
Unpack carefully. This is mechanical equipment and should be
handled with care. If an item appears to have been damaged in
shipment, replace it properly in its carton and notify the shipper. If
any items are missing, notify Broadsight Systems, Inc. The shipping
carton is the safest container in which the unit may be transported.
Save it for possible future use.
Service
If the unit ever needs repair service, the customer should contact
Broadsight Systems, Inc. for a return materials authorization (RMA)
and shipping instructions.
Care and Maintenance
Perform routine maintenance to keep the unit dust free.
Model Designation
SBP-B-100HM Hanging Mount Cap Kit
SBP-B-100P Single Gang Box Converter Plate
Description
The Hanging Mount Cap Kit allows a dome camera to be attached to
the end of a pipe or mount. It accepts ¾”, 1”, or 1-1/2” NPT threads
using supplied adapters. Removing the cap allows the camera to be
attached to a ¼-20 stud or screw using a supplied adapter. The
Singe Gang Box Converter Plate allows the camera to be installed
onto a standard single gang box.
Hardware Kit – SBP-B-100HM
2 x #8-32 x ¼” Pan Head Cross Recessed (Phillips) Screws
2 x #8-32 x 3/8” Flat Head Cross Recessed (Phillips) Screws
1 x ¾” NPT Adapter
1 x 1-1/2” NPT Adapter
1 x ¼-20 Adapter
Hardware Kit – SBP-B-100P
2 x #8-32 x ¼” Pan Head Cross Recessed (Phillips) Screws
Tools Required
L Wrench from Camera Hardware Kit
#2 Cross Recessed (Phillips head) screwdriver
Certification
Camera installation should be performed by a licensed professional
and conform to the National Electrical Code (NEC) and any applicable
local codes.
Installation - Hanging Mount Cap Kit
1. Remove cover from dome camera using L-wrench supplied with
camera. Feed camera cable through appropriate hole in Plate.
2. Select appropriate Adapter fitting depending on type of pipe
used. The Cap has 1” threads. Adapters are included for ¾” or
1-1/2” pipes (see Figure 2). Attach Cap to pipe. Feed camera
cable through Cap and Adapter (optional) If mounting to ¼-20
screw, discard Cap and use ¼-20 Adapter (see Figure 4, skip to
Step 4).
3. Make network cable connection in Cap or pipe and feed excess
cable into Cap or pipe. Attach Plate to Cap using flat head
screws.
4. See Figure 1. Attach Camera Base to Plate by installing Pan
Head screws through the Mounting Holes provided
5. Re-attach Camera Cover using L-wrench supplied with camera.
Made in the USA by Broadsight Systems, Inc. for Samsung Techwin Page 1 of 1
Installation - Single Gang Box Converter Plate
1. Remove cover from dome camera using L-wrench supplied with
camera. Feed camera cable through appropriate hole in Plate.
2. Remove desired knockout from Gang Box. Feed camera cable
through knockout, or bring external cable into gang box and
make camera connection.
3. Use screws from Gang Box kit to attach Plate to Gang Box.
Feed excess cable into Gang Box.
4. Attach Camera Base to Plate by installing Pan Head screws
through Mounting Holes provided (see Figure 1).
5. Reattach Camera Cover using L-wrench supplied with camera.
Loading...