INSTALLATION MANUAL – SBP-B-100x Hanging Mount and Gang Box Adapters
Unpacking
Unpack carefully. This is mechanical equipment and should be handled with care. If an item appears to have been damaged in shipment, replace it properly in its carton and notify the shipper. If any items are missing, notify Broadsight Systems, Inc. The shipping carton is the safest container in which the unit may be transported. Save it for possible future use.
Service
If the unit ever needs repair service, the customer should contact Broadsight Systems, Inc. for a return materials authorization (RMA) and shipping instructions.
Care and Maintenance
Perform routine maintenance to keep the unit dust free.
Model Designation
SBP-B-100HM Hanging Mount Cap Kit SBP-B-100P Single Gang Box Converter Plate
Description
The Hanging Mount Cap Kit allows a dome camera to be attached to the end of a pipe or mount. It accepts ¾”, 1”, or 1-1/2” NPT threads using supplied adapters. Removing the cap allows the camera to be attached to a ¼-20 stud or screw using a supplied adapter. The Singe Gang Box Converter Plate allows the camera to be installed onto a standard single gang box.
Hardware Kit – SBP-B-100HM
2 x #8-32 x ¼” Pan Head Cross Recessed (Phillips) Screws 2 x #8-32 x 3/8” Flat Head Cross Recessed (Phillips) Screws 1 x ¾” NPT Adapter
1 x 1-1/2” NPT Adapter
1 x ¼-20 Adapter
Hardware Kit – SBP-B-100P
2 x #8-32 x ¼” Pan Head Cross Recessed (Phillips) Screws
Tools Required
L Wrench from Camera Hardware Kit
#2 Cross Recessed (Phillips head) screwdriver
Certification
Camera installation should be performed by a licensed professional and conform to the National Electrical Code (NEC) and any applicable local codes.
Installation - Hanging Mount Cap Kit
1.Remove cover from dome camera using L-wrench supplied with camera. Feed camera cable through appropriate hole in Plate.
2.Select appropriate Adapter fitting depending on type of pipe used. The Cap has 1” threads. Adapters are included for ¾” or
1-1/2” pipes (see Figure 2). Attach Cap to pipe. Feed camera cable through Cap and Adapter (optional) If mounting to ¼-20 screw, discard Cap and use ¼-20 Adapter (see Figure 4, skip to Step 4).
3.Make network cable connection in Cap or pipe and feed excess cable into Cap or pipe. Attach Plate to Cap using flat head screws.
4.See Figure 1. Attach Camera Base to Plate by installing Pan Head screws through the Mounting Holes provided
5.Re-attach Camera Cover using L-wrench supplied with camera.
Compatible Model List
SNV-6013, SND-6011R, SCD-2080/B/E/EB, SCD-2082, SCD-2080R, SCD-2042R, SCD-2022R, SCD-2020R, SCD-3080/B, SCD-3083
|
|
|
Adapter |
|
|
|
(3/4-in |
|
|
|
shown) |
|
|
|
Cap |
|
|
|
Plate |
|
|
|
Flat Head |
|
|
Camera |
Screws |
|
|
|
|
|
|
Base |
|
Figure 1 - Camera Base with |
Pan |
|
|
Head |
|
||
Cover Removed. Camera |
|
||
Screws |
|
||
components (black parts) not |
Camera |
|
|
shown in following images. |
|
||
Cover |
|
||
|
|
|
|
|
|
|
|
|
Not Included, part |
|
|
|
|
Figure 2 - Hanging Mount Cap |
|
|
of Gang Box kit |
|
|
|
|
Kit w/ ¾-in Fitting |
|
|
|
|
|
|
|
|
|
|
|
|
¼-20 |
|
|
|
Adapter |
|
Not Included, |
Plate |
|
|
part of Gang |
|
|
|
|
|
|
|
Box Kit |
Camera |
|
|
|
|
|
|
|
Base |
|
|
|
Pan |
|
|
|
Head |
|
|
|
Screws |
|
|
|
Camera |
|
|
|
Cover |
|
|
|
|
|
Figure 3 - Single Gang Box |
Figure 4 - Hanging Mount Cap |
|
Kit w/ ¼-20 Fitting |
||
Converter Plate |
||
|
Installation - Single Gang Box Converter Plate
1.Remove cover from dome camera using L-wrench supplied with camera. Feed camera cable through appropriate hole in Plate.
2.Remove desired knockout from Gang Box. Feed camera cable through knockout, or bring external cable into gang box and make camera connection.
3.Use screws from Gang Box kit to attach Plate to Gang Box. Feed excess cable into Gang Box.
4.Attach Camera Base to Plate by installing Pan Head screws through Mounting Holes provided (see Figure 1).
5.Reattach Camera Cover using L-wrench supplied with camera.
Use tapped holes to attach
Camera Base to Plate
Stud used in SBP-B-100HM Only
Use these holes (2) to attach
Plate to Cap
Holes (3) for Cable pass-through
Use these holes (2) to attach
Plate to Gang Box
Figure 5 - Plate Close Up
Made in the USA by Broadsight Systems, Inc. for Samsung Techwin |
Page 1 of 1 |