Thank you for purchasing the SBH200, Samsung Stereo
Bluetooth Headset. We hope you will be satisfied with
your new headset. Please read the instruction manual to
get started and to make the best use of the headset’s
features.
Drive safely
Using a mobile phone while driving creates a distraction
to the driver which may increase the likelihood of an
accident.
When using the phone while driving, keep conversations
short and do not make notes or read documents. Before
answering calls consider your circumstances. Pull off the
road and park before making or answering calls when
driving conditions require (e.g. bad weather, high traffic
density, presence of children in the car, difficult junctions
or manoeuvres.)
Remember, driving comes first, not the call!
Abide by local laws.
Check phone compatibility
The SBH200 is compatible with most Bluetooth1 (see
Glossary) phones that are compliant with Bluetooth
version 1.1 or higher and support Advanced Audio
Distribution profile, Audio Video Remote Control profile,
Headset profile, and Hands-free profile
phone has Bluetooth capability by visiting your phone
manufacturer’s website.
Some devices, especially those that are not tested
or approved by SIG, may be incompatible with your
phone
.
2
. Ensure that your
English
3
Getting started
This section explains what to remember for the proper
use of your Bluetooth headset.
Checking the accessories
Make sure you have the following items with your
headset: Headset holder, Portable holder, Travel adapter,
User’s Guide.
The items supplied with your headset and the
accessories available at Samsung dealer may vary,
depending on your country.
Your headset overview
REW Button
FF Button
Play/Pause/
Stop Button
Left
Earpiece
Right
Earpiece
4
Volume Up
Button
Volume Down
Button
ON/OFF Switch
Talk Bu tt o n
Microphone
Indicator Light
Button functions
Talk button
In Standby mode
• Press to activate voice dialling.
Available only when your headset and phone are
connected using the Hands-free Bluetooth profile and
your phone supports this function.
• Press and hold to redial the last dialled number.
For some phones, pressing and holding this button
opens the call log list. Press and hold it again to redial
the last number.
When a call comes in
• Press to answer the call.
• Press and hold to reject the call.
During a call
• Press and hold to place the call on hold or retrieve the
held call.
• Press and hold to answer a second call.
• Press and hold to switch between the active call and
held the call.
• Press to end the call.
In Connectable mode
• Press to connect the headset to the phone, if they have
been paired, via the Handsfree or Headset profile.
English
5
Play/Pause/Stop button
In Standby mode
• Press and hold to launch the music player.
When the music player is launched
• Press to begin playing music.
• Press to pause or resume playback.
• Press and hold to stop playback.
• Press again to play from the start of the track.
In Connectable mode
• Press to connect the headset to the phone, if they have
been paired, via the
Volume Up/Down button
• Press to adjust the speaker volume during playback.
• Press to adjust the earpiece volume during a call.
• Press to scroll through call logs, if you accessed the call
log list by pressing and holding .
REW button
• Press to move to the previous track during music
playback.
• Press and hold to rewind during music playback.
FF button
• Press to move to the next track during music playback.
• Press and hold to fast forward during music playback.
6
A/V Remote Control
profile.
Charging the battery
This headset has a rechargeable internal battery which is
non-removable. Please make sure that you fully charge
the battery before using the headset for the first time.
You can use the supplied headset holder and portable
holder to charge the battery.
Using the headset holder
The supplied headset holder serves as a desktop charger
and a wall charger.
To use the holder as a wall charger:
Separate the fixing board from the main body of the
1
holder.
2
Fix the board on the wall with the supplied screws and
then connect the main body to the board.
English
7
3
Plug the adapter into the holder’s charger connector
and place the headset on the holder.
4
Plug the adapter into the electrical outlet.
The red indicator light turns on. When the battery is
fully charged, the indicator light changes to blue.
To use the holder as a desktop charger:
Place the main body of the holder on a flat surface and
place the headset on the holder.
8
Loading...
+ 18 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.