Page 1
Samsung Compatible Active Shutter 3D Glasses
®
Model :SAMBLK2200
Active Shutter 3D Glasses
Overview
Extra3DGlasses.com SA MBLK2200 Active Shutter 3D gl asses are intended as a dir ect
replacement for Samsung 3D Enabled television glas ses.
The SA MBLK2200 are only compatible with Samsung 3D Enab led televisions. The TV
communicates with the glasses using an infrared transmitter that is included with all Samsung
3D Ena bled televisions. The SAMBLK2200 must be used with a Samsung 3D TV to enjoy
3D vie wing.
Included Equipment
Following items are included in the package
1， Active 3D Glasses x1
(contain one piece CR2032 battery)
3， Storage Pouch x1
®
®
®
2， Cleaning Cloth x1
4， User’s Guide x1
Ext ra3DG lasse s.com
Product Features
3
®
1
1. Liquid Crystal Lenses
The high quality LCD lenses will bring you unbelievable 3D effect;
2. IR Signal Receiver
3Folding . Earpiece
4Power Button.
Turn ON: Press the button once;
Turn OFF: Hold the button for about 1.5 seconds.
Auto OFF: The glasses will automatically turn off after 2 minutes if there
is no IR SYNC signal.
5 Indicator . LED
Power ON: LED is on for 1.5 seconds;
Power OFF: LED blinks three times;
Low Battery: LED blinks once every 3 seconds.
6
6. CR2032 Battery
7. Battery Holder
Note: Remove the insulation tab over the battery holder before using.
1
2
4
5
7
2
Using your Extra3DGlasses.com 3D glasses
1. Unpack the 3D glasses from the packaging and remove the protective sheet from the lenses.
This is included to protect the lenses during transportation and can be discarded. The included
cloth bag may be used to protect your 3D glasses
2. Locate and remove the insulation sheet from the battery holder. This is put in place to prevent
the battery from discharging. Once this sheet is removed the glasses battery will function and
the glasses will be ready to use.
3. Follow the user guide of your Samsung® 3D Enabled television to properly set up your television
for 3D viewing.
4. Start up your system and turn on 3D mode
5. Press and hold the power button on the glasses to turn them on. The LED power indicator will
blink once to confirm that the glasses are on and the lenses will appear darker.
6. Put on the glasses and verify that the image appears in 3D and that the glasses are on. If not,
recheck the setting and connection of the entire 3D system.
7. To power off the glasses, press and hold the power button. The LED power indicator will blink
three times to indicate that the glasses are turning off. The lenses will appear brighter.
8. In order to extend the battery life the glasses will also turn off automatically after 2 minutes
when there is no longer an infrared signal being sent by the television. The LED power indicator
will blink three times to indicate that the glasses are turning off. The lenses will appear brighter.
Specifications
Shutter lens
Power consumption
Sync method
Power supply
Battery life
Operating
Condition
Liquid Crystal
2.8 mA
Infrared
One CR2032 Lithium/Manganese dioxide battery – 3V, 220mAh
70 hours of continuous function
Working Temperature
Storage Temperature
Refresh rate
Maximum receiving
distance
Transmittance
0℃ to 40℃
-10℃ to 75℃
200/240Hz
20 Feet
38+/-2%
Replacing Battery
Your Extra3DGlasses.com 3D glasses are powered by one CR2032 lithium/manganese
dioxide battery located on the right side of the glasses frame.
When the battery life is low, the LED power indicator will flash 3 times. From this point
the battery life will be approximately 2 hours. The LED will blink every 3 seconds contin-
uously to indicate the low battery life. When the battery is almost completely drained the
glasses may not operate correctly and the battery must be replaced.
To change the battery, follow these steps:
2
Step 1
Press the locking tab of
the battery holder in the
direction indicated by the
arrow
Step 2
While pressing the locking
tab, pull out the battery holder
downwards from the glasses
3
Step 3
Remove the old battery
and replace it with a new
standard CR2032 3V Lithium/
Manganesebattery. Be sure
to place the battery in the
correct orientation so the
polarity is correct.
4
Step 4
Install the battery holder
with the new battery back
to its original position.
3
4
Page 2
Proper Use and Care of your Extra3DGlasses.com Active 3D Glasses
1. IM PORTANT – Clean the 3D g lasse s only wi th a clea n, dry, lint-fr ee soft c loth.
A clean ing clo th is inc luded f or this e xpres s purpo se.
2. IM PORTANT – When clean ing the g lasse s wipe th e cloth a cross o ne side o f the
len ses at a ti me to rem ove dus t or debr is. DO NO T cl ean bot h sides o f the gla sses
at th e same ti me by pin ching t hem bet ween yo ur fing ers. This may ca use dam age
to th e LCD len ses.
3. Do n ot use an y chemi cal cle aning a gent or g lasse s clean ing spr ay. An y chemi cal
cle aning a gent on t he 3D gla sses ma y damag e the pro duct su rface a nd may ca use
a pro duct ma lfunc tion.
4. The 3D glas ses are c ontro lled by r eceiv ing an in frare d signa l from th e 3D tele visio n.
Mis -oper ation m ay occu r if:
a. The 3D glas ses do no t face th e 3D Tel evisi on. Whe n using t he 3D gla sses fa ce
squ arely t oward s the TV and do not li e down or l ean you r head.
b. If t here ar e any obj ects bl ockin g the pat h betwe en the 3D g lasse s and the i nfrar ed
tra nsmit ter on th e 3D tele visio n
c. If t here ar e other i nfrar ed comm unica tion de vices , resid entia l heati ng equi pment ,
or ma gneti c fluor escen t lamps n earby.
d. If y ou are wa tchin g 3D in a roo m lit by a ma gneti c fluor escen t lamp (5 0Hz or 60 Hz)
you m ay see fl icker ing on th e 3D glas ses. If t his occ urs ple ase tur n off the light
5. If t he glas ses do no t detec t a signa l from th e 3D TV they will tu rn off automat icall y to
con serve b atter y life. The LED on t he glas ses wil l blink 3 t imes an d the gla sses wi ll
tur n off. To resume w atchi ng 3D, se t the TV back to 3D mo de and pr ess the p ower
but ton on th e glass es.
6. Pl ease no te that i f you wat ch 3D TV for too lon g while w earin g 3D glas ses you m ay
experience a headache or fatigue. If you experience headaches, fatigue, or dizziness
sto p watch ing imm ediat ely and r est.
7. In particular, parents should care fully observ e chi ldren when they are watching 3D TV.
Caution
1. The 3D glas ses are f or use wi th Sams ung 3D enable d telev ision s only. Do not
use t he glas ses as ge neral e yewea r, readi ng glas ses, pr otect ive gog gles, o r
sun glass es. Imp roper u se of the 3 D glass es may re sult in i njury.
2. The glass es are no t compa tible w ith oth er bran ds of 3D te levis ions or 3 D movie
the ater te chnol ogies .
3. The 3D glas ses are powered by a CR2032 type lithium-manganese dioxide battery.
Whe n repla cing th e batte ry the same or equivale nt type must be used and must be
installed it in the corr ect polarity (+ , -). Installing the battery in the incorrect polarity
may c ause a fi re or exp losio n. Do not d amage o r destr oy the ba ttery a s this ma y
cau se a fire o r injur y.
4. Do not expose the glasses to direct sunlight, high heat, fire, or water. This may cause
the p roduc t to malf uncti on or cat ch on fire
5. Keep the batter y away from children. If the battery is removed and swallowed consult
a doc tor imm ediat ely.
6. Do not apply force to the lenses of the 3D glasses. Do not bend or drop the 3D glasses.
This may res ult in a pr oduct m alfun ction .
7. Do n ot disa ssemb le, rep air, or mo dify th e produ ct or its p arts. This may r esult i n
dam age to th e produ ct or a mal funct ion.
8. 3D programming may result in involuntary reactions of surprise or shock. Do not place
sur round ing obj ects ne arby th at can be e asily b roken . Invol untar y movem ent as
a res ult of wa tchin g 3D TV may result i n viewe rs harm ing the mselv es.
9. Pr egnan t women , peopl e with he art iss ues or th at beco me easi ly naus eous, a s
well as person s with epilepsy should not watch 3D videos. Some 3D vi deos may
surprise o r overe xcite v iewer s.
10. D o not use t he 3D gla sses if t here is a ny sign o f a crack ed lens o r expos ed wiri ng.
This may res ult in an e lectr ic shoc k or inju ry.
®
Troubleshooting
If th e glass es do not o perat e:
Rep lace th e batte ry if it is d raine d.
Fac e the TV directl y from th e front . Make su re that t he dist ance be tween t he
TV and the 3D gl asses i s less th an 20 fee t in a stra ight li ne.
Che ck the 3D f uncti on sett ings of y our TV.
Che ck the 3D f uncti on sett ings of y our 3D co ntent ( 3D Blu- ray, Satellit e/Cab le,
®
etc .) .
If th e LED bli nks con tinuo usly an d then tu rns off
The batter y is drai ned. Re place i t with a ne w CR203 2 batte ry. Ensure that t he
bat tery is i nstal led wit h the cor rect po larit y (+, -)
Warranty
mon ths. If t he glas ses pro ve to be de fecti ve with r egard s to the ma teria ls or
Thr ee
wor kmans hip und er norm al oper ating c ondit ions du ring th e warra nty per iod, pl ease
con tact in fo@Ex tra3D Glass es.co m Th is warr anty is o nly val id for th e origi nal pur chase r
of th e produ ct. Addi tiona l infor matio n may be fo und at
htt p://w ww.Extra 3DGla sses. com/r eturn s
FCC Compliance
Cha nges or m odifi catio ns not ex press ly appr oved by t he part y respo nsibl e for
com plian ce coul d void th e user' s autho rity to o perat e the equ ipmen t.
This equipment has be en tested an d found to comply with the limits for a Class B digital
device , purs uant to p art 15 of the FC C Rul es. Th ese limit s are desig ned to pr ovid e
rea sonab le prot ectio n again st harm ful int erfer ence in a r eside ntial i nstal latio n. This
equ ipmen t gener ates us es and can radiate radio frequency energy and, if not installed
and u sed in ac corda nce wit h the ins truct ions, may cause harmful interference to radio
com munic ation s. Howe ver, the re is no gu arant ee that i nterf erenc e will no t occur i n a
par ticul ar inst allat ion. If t his equ ipmen t does cause h armf ul interf eren ce to rad io or
tel evisi on reception, which can be deter mined by turning the equipment off an d on, the
use r is enco urage d to try to c orrec t the inte rfer ence b y one o r more of the fo llow ing
mea sures :
—Re orien t or relo cate th e recei ving an tenna .
—In creas e the sep arati on betw een the e quipm ent and r eceiv er.
—Co nnect t he equi pment i nto an ou tlet on a c ircui t different fr om that t o which t he
rec eiver i s conne cted.
—Co nsult t he deal er or an ex perie nced ra dio/T V techn ician f or help .
®
Sam sung is a trade mark of S amsun g Elect ronic s LTD .
Ext ra3DG lasse s.com , maker o f the SAM BLK22 00 Activ e 3D Glas ses is no t affiliated
wit h Samsu ng Elec troni cs LTD.
Mad e in Chin a
5
6
7
Loading...