Samsung S3350 Disassembly and assembly Instructions 6
Level
7.
Disassembly and Assembly Instructions
7-1.
Repair
2
7-1-1.
1
1)
※
1)
2)
Disassembly
Unscrew the6points.
1)
Loosen screws at6points.
Caution
Be care of scratch and molding damage.
Torque
: 1.0 ~ 1.2
Kgf·cm
2
Separate the REAR from the FRONT ass'y
1)
using disassembly stick.
Caution
※
Be care of scratch and molding damage.
1)
using disassembly stick.
Separate the REAR from the FRONT ass'y
1)
3
Seprete LCD connector from Front ass'y
1)
Seprete MIC from the Front ass'y.
1)
※
Be care of scratch and molding damage.
1)
Be care of damage to LCD/MICFPCB
2)
Seprete LCD connector from Front ass'y
1)
Seprete MIC from the Front ass'y.
1)
Caution
4
1) Seprete PBA from the Front ass'y.
2) Seprete the LCD & KEYPAD from the Front ass'y.
Hook
Seprete PBA from the Front ass'y.
1)
Seprete the LCD&KEYPAD from the Front ass'y.
2)
Caution
※
Be care of scratch and molding damage.
1)
Be care of damage to LCD/MICFPCB
.
2)
points
3
.
7-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Level2Repair
7.
7-1-2.
Assemble the LCD&KEYPAD on the Front ass'y.
1)
※
1)
2)
Assembly
1) Assemble the LCD & KEYPAD on the Front ass'y.
1
Caution
Be care of scratch and molding damage.
Be care of damage to LCDFPCB
.
2
Assemble the Front ass'y and PBA
1)
Assemble LCD connector and MIC on the Front
2)
Assemble LCD connector and MIC on the Front
2)
Assy.
Hook
points
3
Assemble the Front ass'y and PBA
1)
Assy.
Caution
※
Be care of scratch and molding damage.
1)
Be care of damage to LCD/MICFPCB
2)
.
3
Assemble the REAR and the FRONT ass'y
1)
Top→Left→Right→Bottom Hook)
(
Caution
※
1)
Assemble the REAR and the FRONT ass'y
1)
Top→Left→Right→Bottom Hook)
(
Be care of scratch and molding damage.
1) Screw the 6 points.
4
Screw the6points.
1)
Caution
※
Be care of scratch and molding damage.
1)
2)
Torque
:1.0~1.2
Kgf·cm
7-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Loading...