User manual
S22E450F
S22E650D
S23E650D
S23E650K
S24E450F
S24E650PL
S24E650XL
S24E650DW
S24E650MW
S24E650XW
S27E650D
S27E650X
The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
BN46-00480A-06
BEFORE USING THE PRODUCT
PREPARATIONS
7Copyright
7Icons used in this manual
8Cleaning
9Securing the Installation Space
9Precautions for storage
10 Safety Precautions
10Symbols
11Electricity and Safety
12Installation and Safety
14Operation and Safety
18Correct posture to use the product
19Checking the Components
19 Checking the Components
21 Parts
21 Frontal Buttons (S22E450F / S24E450F)
23Frontal Buttons (S24E650PL / S24E650XL / S24E650XW / S27E650X)
25Frontal Buttons (S22E650D / S23E650D / S24E650DW / S27E650D)
27 Frontal Buttons (S23E650K / S24E650MW)
29Reverse Side (S23E650K)
30Reverse Side (S24E650MW)
31Reverse Side (S22E450F / S24E450F)
32Reverse Side (S22E650D / S23E650D / S24E650DW / S27E650D)
33Reverse Side (S24E650XL / S24E650XW / S27E650X)
34Reverse Side (S24E650PL)
35Right Side View
Table Of Contents |
2 |
|
|
|
|
|
|
|
Table Of Contents
CONNECTING AND USING A SOURCE DEVICE
SCREEN SETUP
36 Installation
36Attaching the Stand
37Adjusting the Product Tilt and Height
38Rotating the Monitor
39Installing a Wall-mount Kit or Desktop Stand
41Anti-theft Lock
42 Before Connecting
42 Pre-connection Checkpoints
43 Connecting and Using a PC
43 Connecting to a PC
47 Connecting the Power
51Driver Installation
52Setting Optimum Resolution
53 Brightness
53 Configuring Brightness
54 Contrast
54 Configuring Contrast
55 Sharpness
55 Configuring Sharpness
56 Eye Saver Mode
56 Configuring Eye Saver Mode
57 Game Mode
57 Configuring Game Mode
58 SAMSUNG MAGIC Bright
58 Configuring SAMSUNG MAGIC Bright
60SAMSUNG MAGIC Angle (S22E450F / S24E450F)
60 Configuring SAMSUNG MAGIC Angle
62 SAMSUNG MAGIC Upscale
62 Configuring SAMSUNG MAGIC Upscale
Table Of Contents |
3 |
|
|
|
|
|
|
|
Table Of Contents
CONFIGURING TINT
RESIZING OR RELOCATING THE SCREEN
63 Image Size
63 Changing the Image Size
65HDMI Black Level (S22E450F / S24E450F / S23E650K / S24E650PL)
65 Configuring the HDMI Black Level Settings
66Response Time (Except S22E450F / S24E450F)
66 Configuring the Response Time
67 H-Position & V-Position
67 Configuring H-Position & V-Position
69 Coarse
69 Adjusting Coarse
70 Fine
70 Adjusting Fine
71 Red
71 Configuring Red
72 Green
72 Configuring Green
73 Blue
73 Configuring Blue
74 Color Tone
74 Configuring the Color Tone Settings
75 Gamma
75 Configuring Gamma
76 Language
76 Changing the Language
77 Menu H-Position & Menu V-Position
77Configuring Menu H-Position & Menu V- Position
Table Of Contents |
4 |
|
|
|
|
|
|
|
Table Of Contents
SETUP AND RESET
INFORMATION MENU AND OTHERS
INSTALLING THE
SOFTWARE
78 Display Time
78 Configuring Display Time
79 Transparency
79 Changing Transparency
80 Reset All
80 Initializing Settings (Reset All)
81 Smart Eco Saving
81 Configuring Smart Eco Saving
82 Off Timer Plus
82 Configuring Off Timer
84 Configuring Eco Timer
86 PC/AV Mode
86 Configuring PC/AV Mode
88 Key Repeat Time
88 Configuring Key Repeat Time
89 Source Detection
89 Configuring Source Detection
90 INFORMATION
90 Displaying INFORMATION
91Configuring Brightness, Contrast and Sharpness from the Initial Screen
92Configuring Volume in the Initial Screen
93MultiScreen
93Installing the Software
94Removing the Software
Table Of Contents |
5 |
|
|
|
|
|
|
|
Table Of Contents
TROUBLESHOOTING GUIDE
SPECIFICATIONS
APPENDIX
95Requirements Before Contacting Samsung Customer Service Center
95 Testing the Product
95 Checking the Resolution and Frequency
95 Check the following.
98 |
Q & A |
100 General (S22E450F / S22E650D)
102 General (S23E650D / S23E650K)
104 General (S24E450F)
106 General (S24E650PL / S24E650XL)
108General (S24E650DW / S24E650MW / S24E650XW)
110 |
General (S27E650D / S27E650X) |
112 |
PowerSaver |
114 |
Standard Signal Mode Table |
117Responsibility for the Pay Service (Cost to Customers)
117 Not a product defect
117 A Product damage caused by customer's fault
117 Others
119 Correct Disposal
119Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
119Extended warranty
120Terminology
INDEX
Table Of Contents |
6 |
|
|
|
|
|
|
|
The contents of this manual are subject to change without notice to improve quality.
© 2015 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
zAn administration fee may be charged if either
(a) an engineer is called out at your request and there is no defect in the product (i.e. where you have failed to read this user manual).
(b) you bring the unit to a repair center and there is no defect in the product (i.e. where you have failed to read this user manual).
zThe amount of such administration charge will be advised to you before any work or home visit is carried out.
The following images are for reference only. Real-life situations may differ from what is shown in the images.
Before Using the Product |
7 |
|
|
|
|
|
|
|
Before Using the Product
Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
Take the following steps when cleaning.
1. Power off the monitor and computer.
2. Disconnect the power cord from the monitor.
Hold the power cable by the plug and do not touch the cable with wet
hands. Otherwise, an electric shock may result.
3. Wipe the monitor screen using a clean, soft and dry cloth.
z Do not apply a cleaning agent that contains alcohol, solvent, or surfactant to the monitor.
!
zDo not spray water or detergent directly on the product.
4.Wet a soft and dry cloth in water and wring thoroughly to clean the
exterior of the monitor.
5. Connect the power cord to the product after cleaning the product. 6. Power on the monitor and computer.
!
Before Using the Product |
8 |
|
|
|
|
|
|
|
Before Using the Product
zEnsure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product. Be sure to allow the amount of space as shown below or greater when installing the product.
The exterior may differ depending on the product.
|
3.93 inches (10 cm) |
|
3.93 inches (10 cm) |
3.93 |
3.93 |
inches |
inches |
(10 cm) |
(10 cm) |
|
3.93 inches (10 cm) |
Be sure to contact Samsung Customer Service Center if the inside of the monitor needs cleaning. (A
service fee will be charged.)
Before Using the Product |
9 |
|
|
|
|
|
|
|
Before Using the Product
Caution
RISK OF ELECTRIC SHOCK DO NOT OPEN
Caution: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.
This symbol alerts you that important literature concerning operation and maintenance has been included with this product.
|
|
Warning |
A serious or fatal injury may result if instructions are not followed. |
|
|
|
|
|
|
|
|
|
|
Caution |
Personal injury or damage to properties may result if instructions are |
|
|
not followed. |
|
|
|
|
|
|
|
|
|
|
|
|
Activities marked by this symbol are prohibited. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Instructions marked by this symbol must be followed. |
|
|
|
|
Before Using the Product 10
Before Using the Product
The following images are for reference only. Real-life situations may differ from what is shown in the
images.
Warning
Do not use a damaged power cord or plug, or a loose power socket. z An electric shock or fire may result.
Do not plug many products into the same power socket. z Otherwise, the socket may overheat and cause a fire.
Do not touch the power plug with wet hands. z Otherwise, an electric shock may result.
Insert the power plug all the way in so it is not loose. z An unstable connection may cause a fire.
!
!
!
Ensure you connect the power plug to a grounded power socket. (type 1 insulated devices only).
zAn electric shock or injury may result.
Do not bend or pull the power cord with force. Do not weigh the power cord down with a heavy object.
zA damaged power cord may cause an electric shock or fire.
Do not place the power cord or product near heat sources.
zAn electric shock or fire may result.
Remove foreign substances such as dust around the plug pins and power socket with a dry cloth.
zOtherwise, a fire may result.
Before Using the Product 11
Before Using the Product
Caution
|
Do not unplug the power cord when the product is in use. |
|
z The product may become damaged by an electric shock. |
|
Do not use the power cord for products other than authorized products supplied |
|
by Samsung. |
! |
z An electric shock or fire may result. |
|
|
|
Keep the power socket where the power cord is connected unobstructed. |
|
z If any problem occurs in the product, unplug the power cable to completely |
! |
cut the power to the product. |
|
|
|
Power to the product cannot be completely cut off with the power button. |
|
Hold the plug when disconnecting the power cord from the power socket. |
z An electric shock or fire may result.
!
Warning
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.
z Otherwise, a fire may result.
Avoid installing the product in a narrow space with bad ventilation, such as a bookshelf or wall closet.
z Otherwise, a fire may result due to an increased internal temperature.
Keep the plastic packaging bag for the product in a place that cannot be reached by children.
! |
z Children may suffocate. |
Before Using the Product 12
Before Using the Product
! |
Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.).
zThe product may fall and break or cause a personal injury.
zUsing the product in an area with excess vibration may damage the product or cause a fire.
Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke.
zAn electric shock or fire may result.
Do not expose the product to direct sunlight, heat, or a hot object such as a stove.
zOtherwise, the product lifespan may be reduced, or a fire may result.
Do not install the product within the reach of young children. z The product may fall and injure children.
Edible oil (such as soybean oil) may damage or distort the product. Keep the product away from oil pollution.
And do not install or use the product in the kitchen or near the kitchen stove.
Caution
Take care not to drop the product when moving it.
z Otherwise, product failure or personal injury may result.
!
Do not set down the product on its front. z The screen may become damaged.
When installing the product on a cabinet or shelf, make sure that the bottom edge of the front of the product is not protruding.
z The product may fall and break or cause a personal injury.
zInstall the product only on cabinets or shelves of the right size.
Before Using the Product 13
Before Using the Product
Put down the product carefully.
z The product may fall and break or cause a personal injury.
!
SAMSUNG
!
Installing the product in an unusual place (a place exposed to a lot of fine dust, chemical substances, extreme temperatures or a significant presence of moisture, or a place where the product will operate continuously for an extended period of time) may seriously affect its performance.
zBe sure to consult Samsung Customer Service Center before installation if you want to install the product at such a place.
Warning
High voltage runs through the product. Do not attempt to disassemble, repair, or modify the product on your own.
z
z
An electric shock or fire may result.
Contact Samsung Customer Service Center for repair.
To move the product, first disconnect all the cables from it, including the power cable.
! |
z Otherwise, the power cord may be damaged and a fire or electric shock may |
|
|
|
result. |
|
If the product generates a strange noise, a burning smell, or smoke, remove the |
|
power cord immediately and contact Samsung Customer Service Center. |
! |
z An electric shock or fire may result. |
|
Do not let children hang from the product or climb on top of it.
z The product may fall, and your child may become injured or seriously harmed.
If the product falls or the exterior is damaged, power off the product, remove the power cord, and contact Samsung Customer Service Center.
z Otherwise, an electric shock or fire may result.
Do not put a heavy object, toy, or sweets on top of the product.
z The product or heavy objects may fall as children try to reach for the toy or sweets resulting in a serious injury.
Before Using the Product 14
Before Using the Product
If there is a thunderstorm or lightning strike, turn off the power and disconnect the power cable.
! |
z An electric shock or fire may result. |
Do not drop objects on the product or apply impact.
z An electric shock or fire may result.
!
!
!
GAS
100
Do not move the product by pulling the power cord or any cable.
zOtherwise, the cable may be damaged and product failure, an electric shock or fire may result.
If a gas leakage is found, do not touch the product or power plug. Also, ventilate the area immediately.
zSparks can cause an explosion or fire.
Do not lift or move the product by pulling the power cord or any cable.
zOtherwise, the cable may be damaged and product failure, an electric shock or fire may result.
Do not use or keep combustible spray or an inflammable substance near the product.
zAn explosion or fire may result.
Ensure the vents are not blocked by tablecloths or curtains.
zOtherwise, a fire may result from an increased internal temperature.
Do not insert a metallic object (a chopstick, coin, hair pin, etc.) or inflammable object (paper, match, etc.) into the vent or ports of the product.
zIf water or any foreign substance enters the product, be sure to power off the product, remove the power cord, and contact Samsung Customer Service Center.
zProduct failure, an electric shock or fire may result.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of the product.
zIf water or any foreign substance enters the product, be sure to power off the product, remove the power cord, and contact Samsung Customer Service Center.
zProduct failure, an electric shock or fire may result.
Before Using the Product 15
Before Using the Product
Caution
-_-
!
!
Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels.
zIf you are not going to use the product for an extended period of time, activate power-saving mode or a moving-picture screen saver.
Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc.).
zOtherwise, a fire may result from accumulated dust, overheating, an electric shock, or electric leakage.
Use the product at the recommended resolution and frequency.
zOtherwise,Your eyesight may deteriorate.
Do not put DC power adapters together.
zOtherwise, a fire may result.
Remove the plastic bag from the DC power adapter before you use it.
zOtherwise, a fire may result.
Do not let water enter the DC power device or get the device wet.
zAn electric shock or fire may result.
zAvoid using the product outdoors where it can be exposed to rain or snow.
zBe careful not to get the DC power adapter wet when you wash the floor.
Do not put the DC power adapter near to any heating apparatus.
z Otherwise, a fire may result.
Keep the DC power adapter in a well-ventilated area.
!
Looking at the screen too close for an extended period of time can deteriorate your eyesight.
!
Before Using the Product 16
Before Using the Product
Do not hold the monitor upside-down or move it by holding the stand. z The product may fall and break or cause a personal injury.
Do not use humidifiers or stoves around the product. z An electric shock or fire may result.
Rest your eyes for more than 5 minutes for every 1 hour of product use. z Eye fatigue will be relieved.
!
Do not touch the screen when the product has been turned on for an extended period of time as it will become hot.
Store the small accessories used with the product out of reach of children.
! |
|
|
Exercise caution when adjusting the product angle or stand height. |
|
z Otherwise, children's fingers or hands may become stuck and injured. |
! |
z Tilting the product excessively may cause it to fall and result in personal |
|
injury. |
|
Do not place heavy objects on the product. |
|
z Product failure or personal injure may result. |
When using headphones or earphones, do not turn the volume too high. z Having the sound too loud may damage your hearing.
Before Using the Product 17
Before Using the Product
Use the product in the correct posture as follows:
z
z
z
z
z
z
Straighten your back.
Allow a distance of 45 to 50 cm between your eye and the screen, and look slightly downward at the screen.
Keep your eyes directly in front of the screen.
Adjust the angle so light does not reflect on the screen.
Keep your forearms perpendicular to your upper arms and level with the back of your hands.
Keep your elbows at about a right angle.
Adjust the height of the product so you can keep your knees bent at 90 degrees or more, your heels attached to the floor, and your arms lower than your heart.
Before Using the Product 18
z
z
Contact the dealer from whom you purchased the product if any item is missing.
The appearance of the components may differ from the images shown.
Components
Warranty card |
Regulatory guide |
Quick setup guide |
(optional) |
(Not available in some locations) |
User manual |
D-SUB cable |
(optional) |
Power cable |
(optional) |
D-SUB cable |
DVI cable |
DVI cable |
(optional) |
(optional) |
(optional) |
HDMI cable |
HDMI-DVI cable |
DP cable |
||
(optional) |
(optional) |
(optional) |
||
|
|
|
|
|
Stereo Cable |
USB cable |
Stand base |
(optional) |
(optional) |
(optional) |
1 Preparations 19
1Preparations
Stand base |
|
|
(Applicable to the stand |
Stand neck |
|
models that have USB ports |
||
(optional) |
||
only.) |
||
|
||
(optional) |
|
Components may vary depending on the country.
1 Preparations 20
1Preparations
The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
MENU |
EYE |
SOURCE |
SAVER |
|
|
Key Guide |
MENU |
EYE |
SOURCE |
SAVER |
AUTO
Icons |
Description |
|
|
zOpen or close the onscreen display (OSD) menu, or return to the parent menu.
zOSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings. Enable: To lock the OSD control, press the [MENU] button for 10 seconds. Disable: To unlock the locked OSD control, press the [MENU] button for more than 10 seconds.
MENU
If the OSD control is locked,
zBrightness and Contrast can be adjusted. Eye Saver Mode is available. INFORMATION can be viewed.
zThe Eye Saver Mode function can be used by pressing the [ ] button. (The Eye Saver Mode is available even when the OSD
control is locked.)
Press [] to enable or disable Eye Saver Mode.
The items below are not available if the Eye Saver Mode function is enable. z PICTURE Brightness, Game Mode, MAGICSAMSUNGBright, MAGICSAMSUNGAngle
zCOLOR
zSETUP&RESET Smart Eco Saving
Move to the upper or lower menu or adjust the value for an option on the
OSD menu.
1 Preparations 21
1Preparations
Icons |
|
Description |
|
|
|
||
|
Use this button to control the brightness, contrast and sharpness of the |
||
|
screen. |
|
|
|
|
|
|
|
Confirm a menu selection. |
|
|
|
Pressing the [ |
] button when the OSD menu is not displayed will |
|
|
change the input source (Analog/DVI/HDMI). If you power on the |
||
|
product or change the input source by pressing the [ |
] button, a |
|
|
message that shows the changed input source will appear at the top left |
||
|
corner of the screen. |
|
|
|
This function is not available for products with an Analog interface |
||
|
only. |
|
|
Press the [AUTO] button to automatically adjust the screen settings.
z Changing the resolution in Display Properties will activate the
AUTO
Auto Adjustment function.
zThis function is only available in Analog mode.
Turn the screen on or off.
When a control button on the product is pressed, the Key Guide will be displayed before the onscreen menu opens. (The guide shows the function of the button pressed.)
Key Guide To access the onscreen menu when the guide is displayed, press the corresponding button again.
The Key Guide may vary depending on the function or product model.
Refer to the actual product.
1 Preparations 22
1Preparations
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
|
|
Key Guide |
EYE |
EYE |
SOURCE |
MENU SAVER SOURCE |
||
MENU |
SAVER |
AUTO
Icons |
Description |
|
|
zOpen or close the onscreen display (OSD) menu, or return to the parent menu.
zOSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings. Enable: To lock the OSD control, press the [MENU] button for 10 seconds. Disable: To unlock the locked OSD control, press the [MENU] button for more than 10 seconds.
MENU
If the OSD control is locked,
zBrightness and Contrast can be adjusted. Eye Saver Mode is available. INFORMATION can be viewed.
zThe Eye Saver Mode function can be used by pressing the [] button. (The Eye Saver Mode is available even when the OSD control
is locked.)
Press [] to enable or disable Eye Saver Mode.
The items below are not available if the Eye Saver Mode function is enable. z PICTURE Brightness, Game Mode, MAGICSAMSUNGBright
zCOLOR
zSETUP&RESET Smart Eco Saving
Move to the upper or lower menu or adjust the value for an option on the
OSD menu.
Use this button to control the volume or the screen brightness or contrast.
1 Preparations 23
1Preparations
Icons |
Description |
|
|
Confirm a menu selection.
Pressing the [] button when the OSD menu is not displayed will change the input source (S24E650XL/S24E650XW/S27E650X: Analog/
DVI/DisplayPort, S24E650PL: Analog/HDMI/DisplayPort). If you power on the product or change the input source by pressing the [] button, a message that shows the changed input source will appear at the top left corner of the screen.
This function is not available for products with an Analog interface
only.
Press the [AUTO] button to automatically adjust the screen settings.
z Changing the resolution in Display Properties will activate the
AUTO
Auto Adjustment function.
zThis function is only available in Analog mode.
Turn the screen on or off.
When a control button on the product is pressed, the Key Guide will be displayed before the onscreen menu opens. (The guide shows the function of the button pressed.)
Key Guide To access the onscreen menu when the guide is displayed, press the corresponding button again.
The Key Guide may vary depending on the function or product model.
Refer to the actual product.
1 Preparations 24
1Preparations
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
MENU |
EYE |
SOURCE |
SAVER |
|
|
Key Guide |
MENU |
EYE |
SOURCE |
SAVER |
AUTO
Icons |
Description |
|
|
zOpen or close the onscreen display (OSD) menu, or return to the parent menu.
zOSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings. Enable: To lock the OSD control, press the [MENU] button for 10 seconds. Disable: To unlock the locked OSD control, press the [MENU] button for more than 10 seconds.
MENU
If the OSD control is locked,
zBrightness and Contrast can be adjusted. Eye Saver Mode is available. INFORMATION can be viewed.
zThe Eye Saver Mode function can be used by pressing the [] button. (The Eye Saver Mode is available even when the OSD control
is locked.)
Press [] to enable or disable Eye Saver Mode.
The items below are not available if the Eye Saver Mode function is enable.
z PICTURE Brightness, Game Mode, MAGICSAMSUNGBright
zCOLOR
zSETUP&RESET Smart Eco Saving
Move to the upper or lower menu or adjust the value for an option on the
OSD menu.
Use this button to control the brightness, contrast and sharpness of the screen.
1 Preparations 25
1Preparations
Icons |
Description |
|
|
Confirm a menu selection.
Pressing the [] button when the OSD menu is not displayed will change the input source (Analog/DVI/DisplayPort). If you power on the product or change the input source by pressing the [
] button, a message that shows the changed input source will appear at the top left corner of the screen.
This function is not available for products with an Analog interface
only.
Press the [AUTO] button to automatically adjust the screen settings.
z Changing the resolution in Display Properties will activate the
AUTO
Auto Adjustment function.
zThis function is only available in Analog mode.
Turn the screen on or off.
When a control button on the product is pressed, the Key Guide will be displayed before the onscreen menu opens. (The guide shows the function of the button pressed.)
Key Guide To access the onscreen menu when the guide is displayed, press the corresponding button again.
The Key Guide may vary depending on the function or product model.
Refer to the actual product.
1 Preparations 26
1Preparations
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
|
|
Key Guide |
EYE |
EYE |
SOURCE |
MENU SAVER SOURCE |
||
MENU |
SAVER |
AUTO
Icons |
Description |
|
|
zOpen or close the onscreen display (OSD) menu, or return to the parent menu.
zOSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings. Enable: To lock the OSD control, press the [MENU] button for 10 seconds. Disable: To unlock the locked OSD control, press the [MENU] button for more than 10 seconds.
MENU
If the OSD control is locked,
zBrightness and Contrast can be adjusted. Eye Saver Mode is available. INFORMATION can be viewed.
zThe Eye Saver Mode function can be used by pressing the [] button. (The Eye Saver Mode is available even when the OSD control
is locked.)
Press [] to enable or disable Eye Saver Mode.
The items below are not available if the Eye Saver Mode function is enable. z PICTURE Brightness, Game Mode, MAGICSAMSUNGBright, MAGICSAMSUNGAngle
zCOLOR
zSETUP&RESET Smart Eco Saving
Move to the upper or lower menu or adjust the value for an option on the OSD menu.
Use this button to control the volume or the screen brightness or contrast.
1 Preparations 27
1Preparations
Icons |
Description |
|
|
Confirm a menu selection.
Pressing the [] button when the OSD menu is not displayed will change the input source (S23E650K: Analog/HDMI, S24E650MW: Analog/DVI). If you power on the product or change the input source by pressing the [
] button, a message that shows the changed input source will appear at the top left corner of the screen.
This function is not available for products with an Analog interface only.
Press the [AUTO] button to automatically adjust the screen settings.
z Changing the resolution in Display Properties will activate the
AUTO
Auto Adjustment function.
zThis function is only available in Analog mode.
Turn the screen on or off.
When a control button on the product is pressed, the Key Guide will be displayed before the onscreen menu opens. (The guide shows the function of the button pressed.)
Key Guide To access the onscreen menu when the guide is displayed, press the corresponding button again.
The Key Guide may vary depending on the function or product model.
Refer to the actual product.
1 Preparations 28
1Preparations
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
HDMI IN |
AUDIO IN/OUT |
POWER IN |
HDMI IN |
AUDIO IN/OUT |
POWER IN |
RGB IN |
|
RGB IN |
|
||
|
OUT |
|
|
OUT |
|
|
IN |
|
|
IN |
|
|
Port |
Description |
|
|
|
|
|
Connect to a source device using an HDMI cable. |
|
|
|
|
|
|
|
|
Connect to a PC using the D-SUB cable. |
|
|
|
|
|
Connect to an audio output device such as headphones. |
OUT |
Applicable to the models that have speakers only. |
|
|
|
|
|
|
|
|
|
Connect to an audio-input source using an audio cable. |
IN |
Applicable to the models that have speakers only. |
|
|
|
Connect to an external device.
Connect the [ ] port of the monitor and the USB port of the computer with the USB cable.
Applicable to the stand models that have USB ports only.
Connect the power cord for your monitor to the [POWER IN] port on the back of the product.
1 Preparations 29
1Preparations
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
DVI IN |
AUDIO IN/OUT |
POWER IN |
DVI IN |
AUDIO IN/OUT |
POWER IN |
RGB IN |
|
RGB IN |
|
||
|
OUT |
|
|
OUT |
|
|
IN |
|
|
IN |
|
Port |
Description |
|
|
Connect to a PC using the DVI cable.
The [DVI IN] terminal is supplied for the digital (DVI)-dedicated
models only.
Connect to a PC using the D-SUB cable.
Connect to an audio output device such as headphones.
OUT
Applicable to the models that have speakers only.
Connect to an audio-input source using an audio cable.
IN
Applicable to the models that have speakers only.
Connect to an external device.
Connect the [ ] port of the monitor and the USB port of the computer with the USB cable.
Applicable to the stand models that have USB ports only.
Connect the power cord for your monitor to the [POWER IN] port on the back of the product.
1 Preparations 30