User Manual
S24C650BW
S24C650MW
S24C650DW
S24C650XW
S27C650X
The color and the appearance may differ depending on
the product, and the specifications are subject to
change without prior notice to improve the performance.
BN46-00301F-02
Table Of Contents
BEFORE USING THE
PRODUCT
PREPARATIONS 18 Checking the Contents
7 Copyright
7 Icons used in this manual
8 Cleaning
9 Securing the Installation Space
9 Precautions for storage
10 Safety Precautions
10 Symbols
11 Electricity and Safety
12 Installation and Safety
14 Operation and Safety
17 Correct posture to use the product
18 Removing the Packaging
19 Checking the Components
CONNECTING AND USING
A SOURCE DEVICE
20 Parts
20 Frontal Buttons
24 Reverse Side (S24C650BW)
25 Reverse Side (S24C650MW)
26 Reverse Side (S24C650DW)
27 Reverse Side (S24C650XW / S27C650X)
28 Right Side View
29 Installation
29 Attaching the Stand
30 Adjusting the Product Tilt and Height
30 Rotating the Monitor
31 Installing a Wall-mount Kit or Desktop Stand
33 Anti-theft Lock
34 Before Connecting
34 Pre-connection Checkpoints
Table Of Contents
2
Table Of Contents
35 Connecting and Using a PC
35 Connecting to a PC
39 Connecting the Power
41 Driver Installation
42 Setting Optimum Resolution
43 Changing the Resolution Using a PC
SCREEN SETUP 47 Brightness
47 Configuring Brightness
48 Contrast
48 Configuring Contrast
49 Sharpness
49 Configuring Sharpness
50 SAMSUNG MAGIC Bright
50 Configuring SAMSUNG MAGIC Bright
51 Image Size
51 Changing the Image Size
53 Response Time
53 Configuring Response Time
54 H-Position & V-Position
54 Configuring H-Position & V-Position
55 Coarse
55 Adjusting Coarse
56 Fine
56 Adjusting Fine
CONFIGURING TINT 57 Red
57 Configuring Red
58 Green
58 Configuring Green
Table Of Contents
3
Table Of Contents
59 Blue
59 Configuring Blue
60 Color Tone
60 Configuring the Color Tone Settings
61 Gamma
61 Configuring Gamma
RESIZING OR
RELOCATING THE
SCREEN
62 Language
62 Changing the Language
63 Menu H-Position & Menu V-Position
63 Configuring Menu H-Position & Menu V-
Position
64 Display Time
64 Configuring Display Time
65 Transparency
65 Changing Transparency
SETUP AND RESET 66 Reset
66 Initializing Settings (Reset)
67 Eco Saving
67 Configuring Eco Saving
68 Off Timer
68 Configuring Off Timer
69 Turn Off After
69 Configuring Turn Off After
70 PC/AV Mode
70 Configuring PC/AV Mode
71 Key Repeat Time
71 Configuring Key Repeat Time
72 Source Detection
72 Configuring Source Detection
Table Of Contents
4
Table Of Contents
73 Customized Key
73 Configuring Customized Key
INFORMATION MENU AND
OTHERS
INSTALLING THE
SOFTWARE
74 INFORMATION
74 Displaying INFORMATION
75 Configuring Brightness and Contrast in
the Initial Screen
75 Configuring Volume in the Initial Screen
76 Magic Tune
76 What is MagicTune?
76 Installing the Software
77 Removing the Software
78 MultiScreen
78 Installing the Software
79 Removing the Software
80 MagicRotation
80 Installing the Software
82 Removing the Software
TROUBLESHOOTING
GUIDE
SPECIFICATIONS 88 General (S24C650BW / S24C650MW)
83 Requirements Before Contacting
Samsung Customer Service Center
83 Testing the Product
83 Checking the Resolution and Frequency
83 Check the following.
86 Q & A
90 General (S24C650DW / S24C650XW)
92 General (S27C650X)
94 PowerSaver
95 Standard Signal Mode Table
Table Of Contents
5
Table Of Contents
APPENDIX
INDEX
97 Contact SAMSUNG WORLD WIDE
103 Responsibility for the Pay Service (Cost
to Customers)
103 Not a product defect
103 A Product damage caused by customer's fault
103 Others
104 Correct Disposal
104 Correct Disposal of This Product (Waste
Electrical & Electronic Equipment)
105 Terminology
Table Of Contents
6
Copyright
The contents of this manual are subject to change without notice to improve quality.
© 2013 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is
prohibited.
Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Before Using the Product
Icons used in this manual
The following images are for reference only. Real-life situations may
differ from what is shown in the images.
Before Using the Product
7
Cleaning
!
Before Using the Product
Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
Take the following steps when cleaning.
1. Power off the monitor and computer.
2. Disconnect the power cord from the monitor.
Hold the power cable by the plug and do not touch the cable with wet
hands. Otherwise, an electric shock may result.
3. Wipe the monitor screen using a clean, soft and dry cloth.
Do not apply a cleaning agent that contains alcohol,
solvent, or surfactant to the monitor.
!
Do not spray water or detergent directly on the product.
4. Wet a soft and dry cloth in water and wring thoroughly to clean the
exterior of the monitor.
5. Connect the power cord to the product after cleaning the product.
6. Power on the monitor and computer.
Before Using the Product
8
Before Using the Product
10 cm
10 cm
10 cm
10 cm
10 cm
Securing the Installation Space
Ensure some space around the product for ventilation. An internal temperature rise may cause fire
and damage the product. Be sure to allow the amount of space as shown below or greater when
installing the product.
The exterior may differ depending on the product.
Precautions for storage
Be sure to contact Samsung Customer Service Center (page 97) if the inside of the monitor needs
cleaning. (Service fee will be charged.)
Before Using the Product
9
Before Using the Product
Safety Precautions
Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK)
This symbol indicates that high voltage is present inside.
It is dangerous to make any kind of contact with any internal part of this product.
Caution
RISK OF ELECTRIC SHOCK DO NOT OPEN
THERE ARE NO USER SERVICEABLE PARTS INSIDE.
REFER ALL SERVICING TO QUALIFIED PERSONNEL.
Symbols
Warning
Caution
This symbol alerts you that important literature concerning operation and maintenance
has been included with this product.
A serious or fatal injury may result if instructions are not followed.
Personal injury or damage to properties may result if instructions are not followed.
Activities marked by this symbol are prohibited.
Instructions marked by this symbol must be followed.
Before Using the Product
10
Before Using the Product
!
!
!
Electricity and Safety
The following images are for reference only. Real-life situations may differ from what is shown in the
images.
Warning
Do not use a damaged power cord or plug, or a loose power socket.
An electric shock or fire may result.
Do not plug many products into the same power socket.
Otherwise, the socket may overheat and cause a fire.
Do not touch the power plug with wet hands.
Otherwise, an electric shock may result.
Insert the power plug all the way in so it is not loose.
An unstable connection may cause a fire.
Ensure you connect the power plug to a grounded power socket. (type 1
insulated devices only).
An electric shock or injury may result.
Do not bend or pull the power cord with force. Do not weigh the power cord
down with a heavy object.
A damaged power cord may cause an electric shock or fire.
Do not place the power cord or product near heat sources.
An electric shock or fire may result.
Remove foreign substances such as dust around the plug pins and power socket
with a dry cloth.
Otherwise, a fire may result.
Before Using the Product
11
Before Using the Product
!
!
!
!
Caution
Do not unplug the power cord when the product is in use.
The product may become damaged by an electric shock.
Do not use the power cord for products other than authorized products supplied
by Samsung.
An electric shock or fire may result.
Keep the power socket where the power cord is connected unobstructed.
If any problem occurs in the product, unplug the power cable to completely
cut the power to the product.
Power to the product cannot be completely cut off with the power button.
Hold the plug when disconnecting the power cord from the power socket.
An electric shock or fire may result.
Installation and Safety
Warning
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP
OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.
Otherwise, a fire may result.
Avoid installing the product in a narrow space with bad ventilation, such as a
bookshelf or wall closet.
Otherwise, a fire may result due to an increased internal temperature.
Keep the plastic packaging bag for the product in a place that cannot be reached
by children.
Children may suffocate.
Before Using the Product
12
Before Using the Product
!
!
Do not install the product on an unstable or vibrating surface (insecure shelf,
sloped surface, etc.).
The product may fall and break or cause a personal injury.
Using the product in an area with excess vibration may damage the product
or cause a fire.
Do not install the product in a vehicle or a place exposed to dust, moisture (water
drips, etc.), oil, or smoke.
An electric shock or fire may result.
Do not expose the product to direct sunlight, heat, or a hot object such as a
stove.
Otherwise, the product lifespan may be reduced, or a fire may result.
Caution
Do not install the product within the reach of young children.
The product may fall and injure children.
Edible oil, such as soybean oil, can damage or deform the product. Do not install
the product in a kitchen or near a kitchen counter.
Take care not to drop the product when moving it.
Otherwise, product failure or personal injury may result.
Do not set down the product on its front.
The screen may become damaged.
When installing the product on a cabinet or shelf, make sure that the bottom
edge of the front of the product is not protruding.
The product may fall and break or cause a personal injury.
Install the product only on cabinets or shelves of the right size.
Before Using the Product
13
Before Using the Product
!
SAMSUNG
!
!
!
Put down the product carefully.
The product may fall and break or cause a personal injury.
Installing the product in an unusual place (a place exposed to a lot of fine
particles, chemical substances or extreme temperatures, or an airport or train
station where the product should operate continuously for an extended period of
time) may seriously affect its performance.
Be sure to consult Samsung Customer Service Center (page 97) before
installation if you want to install the product at such a place.
Operation and Safety
Warning
High voltage runs through the product. Do not attempt to disassemble, repair, or
modify the product on your own.
An electric shock or fire may result.
Contact Samsung Customer Service Center (page 97) for repair.
Before moving the product, turn off the power switch and disconnect the power
cable and all other connected cables.
Otherwise, the power cord may be damaged and a fire or electric shock may
result.
If the product generates a strange noise, a burning smell, or smoke, remove the
power cord immediately and contact Samsung Customer Service Center (page
97).
An electric shock or fire may result.
Do not let children hang from the product or climb on top of it.
The product may fall, and your child may become injured or seriously
harmed.
If the product falls or the exterior is damaged, power off the product, remove the
power cord, and contact Samsung Customer Service Center (page 97).
Otherwise, an electric shock or fire may result.
Do not put a heavy object, toy, or sweets on top of the product.
The product or heavy objects may fall as children try to reach for the toy or
sweets resulting in a serious injury.
Before Using the Product
14
Before Using the Product
!
!
!
GAS
!
100
During a lightning or thunderstorm, power off the product and remove the power
cable.
An electric shock or fire may result.
Do not drop objects on the product or apply impact.
An electric shock or fire may result.
Do not move the product by pulling the power cord or any cable.
Otherwise, the cable may be damaged and product failure, an electric shock
or fire may result.
If a gas leakage is found, do not touch the product or power plug. Also, ventilate
the area immediately.
Sparks can cause an explosion or fire.
Do not lift or move the product by pulling the power cord or any cable.
Otherwise, the cable may be damaged and product failure, an electric shock
or fire may result.
Do not use or keep combustible spray or an inflammable substance near the
product.
An explosion or fire may result.
Ensure the vents are not blocked by tablecloths or curtains.
Otherwise, a fire may result from an increased internal temperature.
Do not insert a metallic object (a chopstick, coin, hair pin, etc.) or inflammable
object (paper, match, etc.) into the vent or ports of the product.
If water or any foreign substance enters the product, be sure to power off the
product, remove the power cord, and contact Samsung Customer Service
Center (page 97).
Product failure, an electric shock or fire may result.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic
objects on top of the product.
If water or any foreign substance enters the product, be sure to power off the
product, remove the power cord, and contact Samsung Customer Service
Center (page 97).
Product failure, an electric shock or fire may result.
Before Using the Product
15
Before Using the Product
!
-_-
!
!
!
!
!
Caution
Leaving the screen fixed on a stationary image for an extended period of time
may cause afterimage burn-in or defective pixels.
If you are not going to use the product for an extended period of time,
activate power-saving mode or a moving-picture screen saver.
Disconnect the power cord from the power socket if you do not plan on using the
product for an extended period of time (vacation, etc.).
Otherwise, a fire may result from accumulated dust, overheating, an electric
shock, or electric leakage.
Use the product at the recommended resolution and frequency.
Otherwise,Your eyesight may deteriorate.
Looking at the screen too close for an extended period of time can deteriorate
your eyesight.
Do not hold the monitor upside-down or move it by holding the stand.
The product may fall and break or cause a personal injury.
Do not use humidifiers or stoves around the product.
An electric shock or fire may result.
Rest your eyes for more than 5 minutes for every 1 hour of product use.
Eye fatigue will be relieved.
Do not touch the screen when the product has been turned on for an extended
period of time as it will become hot.
Store the small accessories used with the product out of reach of children.
Before Using the Product
16
Before Using the Product
!
Exercise caution when adjusting the product angle or stand height.
Otherwise, children's fingers or hands may become stuck and injured.
Tilting the product excessively may cause it to fall and result in personal
injury.
Do not place heavy objects on the product.
Product failure or personal injure may result.
When using headphones or earphones, do not turn the volume too high.
Having the sound too loud may damage your hearing.
Correct posture to use the product
Use the product in the correct posture as follows.
Straighten your back.
Allow a distance of 45 to 50cm between your eye and the screen, and look slightly
downward at the screen.
Keep your eyes directly in front of the screen.
Adjust the angle so light does not reflect on the screen.
Keep your forearms perpendicular to your upper arms and level with the back of
your hands.
Keep your elbows at about a right angle.
Adjust the height of the product so you can keep your knees bent at 90 degrees or
more, your heels attached to the floor, and your arms lower than your heart.
Before Using the Product
17
Preparations
1
1.1 Checking the Contents
1.1.1 Removing the Packaging
1 Open the packaging box. Be careful not to damage the product when you open the packaging with
a sharp instrument.
2 Remove the styrofoam from the product.
3 Check the components and remove the styrofoam and plastic bag.
4 Store the box in a dry area so that it can be used when moving the product in the future.
This image is for reference only.
1 Preparations
18
1
Preparations
1.1.2 Checking the Components
Contact the dealer from whom you purchased the product if any item is missing.
The appearance of the components and items sold separately may differ from the image shown.
Components
Quick setup guide
Power cable D-SUB cable (optional) DVI cable (optional)
DP cable (optional) Stereo Cable (optional) USB cable (optional)
Stand
Components may vary depending on the country.
(Not available in some locations)
(Applicable to the stand models
that have USB ports only.)
Warranty card
Stand
User manual
1 Preparations
19
Preparations
SAMSUNG
MAGIC
BRIGHT
VOL
AUTO
SAMSUNG
MAGIC
BRIGHT
VO
VOLL
SAMSUNG
MAGIC
BRIGHT
AUTO
Key Guide
AUTO
MENU
M
MENU
SAMSUNG
MAGIC
→
1
1.2 Parts
1.2.1 Frontal Buttons
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
S24C650BW / S24C650MW
Icons Description
Open or close the onscreen display (OSD) menu, or return to the
parent menu.
OSD control lock: Maintain the current settings, or lock the OSD
control to prevent unintended changes to settings.
Enable: To lock the OSD control, press the [ ] button for 10
ENU
seconds.
Disable: To unlock the locked OSD control, press the [ ] button
for more than 10 seconds.
If the OSD control is locked,
Brightness and Contrast can be adjusted, and INFORMATION
can be viewed.
The Customized Key function can be used by pressing the [ ]
button. (The Customized Key is available even when the OSD
control is locked.)
Configure Customized Key and press [ ]. The following options will
be enabled.
Bright - Eco Saving - Image Size
To configure Customized Key, go to SETUP&RESET
Customized Key and select the mode you want.
1 Preparations
20
1
AUTO
AUTO
Preparations
Icons Description
Move to the upper or lower menu or adjust the value for an option on the
OSD menu.
Use this button to control the brightness and contrast of the screen.
When OSD is not on the screen,push the button to adjust the
Volume in Analog / DVI mode if a stereo cable is connected to
the [IN] port.
Applicable to the models that have speakers only.
Confirm a menu selection.
Pressing the [ ] button when the OSD menu is not displayed will
change the input source (Analog / DVI). If you power on the product or
change the input source by pressing the [ ] button, a message that
shows the changed input source will appear at the top left corner of the
screen.
Key Guide
Press the [ ] button to automatically adjust the screen settings.
Changing the resolution in Display Properties will activate the
Auto Adjustment function.
This function is only available in Analog mode.
Turn the screen on or off.
When a control button on the product is pressed, the Key Guide will be
displayed before the onscreen menu opens. (The guide shows the
function of the button pressed.)
To access the onscreen menu when the guide is displayed, press the
corresponding button again.
The Key Guide may vary depending on the function or product model.
Refer to the actual product.
1 Preparations
21
1
SAMSUNG
MAGIC
BRIGHT
VOL
AUTO
SAMSUNG
MAGIC
BRIGHT
VO
VOLL
SAMSUNG
MAGIC
BRIGHT
AUTO
Key Guide
AUTO
MENU
M
M
SAMSUNG
MAGIC
Preparations
S24C650DW / S24C650XW / S27C650X
Icons Description
Open or close the onscreen display (OSD) menu, or return to the
parent menu.
OSD control lock: Maintain the current settings, or lock the OSD
control to prevent unintended changes to settings.
Enable: To lock the OSD control, press the [ ] button for 10
seconds.
Disable: To unlock the locked OSD control, press the [ ] button
for more than 10 seconds.
If the OSD control is locked,
Brightness and Contrast can be adjusted, and INFORMATION
can be viewed.
The Customized Key function can be used by pressing the [ ]
button. (The Customized Key is available even when the OSD
control is locked.)
Configure Customized Key and press [ ]. The following options will
be enabled.
Bright - Eco Saving - Image Size
To configure Customized Key, go to SETUP&RESET
Customized Key and select the mode you want.
Move to the upper or lower menu or adjust the value for an option on the
OSD menu.
ENU
ENU
→
1 Preparations
22
1
AUTO
AUTO
Preparations
Icons Description
Use this button to control the brightness and contrast of the screen.
When OSD is not on the screen, push the button to adjust the
Volume in Analog / DVI mode if a stereo cable is connected to
the [IN] port.
When OSD is not on the screen,push the button to adjust the
Volume in DisplayPort mode.
Applicable to the models that have speakers only.
Confirm a menu selection.
Pressing the [ ] button when the OSD menu is not displayed will
change the input source (Analog / DVI / DisplayPort). If you power on
the product or change the input source by pressing the [ ] button, a
message that shows the changed input source will appear at the top left
corner of the screen.
Key Guide
Press the [ ] button to automatically adjust the screen settings.
Changing the resolution in Display Properties will activate the
Auto Adjustment function.
This function is only available in Analog mode.
Turn the screen on or off.
When a control button on the product is pressed, the Key Guide will be
displayed before the onscreen menu opens. (The guide shows the
function of the button pressed.)
To access the onscreen menu when the guide is displayed, press the
corresponding button again.
The Key Guide may vary depending on the function or product model.
Refer to the actual product.
1 Preparations
23
1
DVI IN
POWER IN
RGB IN
POWER IN
DVI IN
DVI IN
POWER IN
RGB IN
POWER IN
DVI IN
Preparations
1.2.2 Reverse Side (S24C650BW)
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
Port Description
Connect the power cord for your monitor to the [POWER IN] port on the
back of the product.
Connect to a PC using the D-SUB cable.
Connect to a PC using the DVI cable.
The [DVI IN] terminal is supplied for the digital (DVI)-dedicated models
only.
Connect the [ ] port of the monitor and the USB port of the computer
with the USB cable.
Applicable to the stand models that have USB ports only.
1 Preparations
24
1
DVI IN
POWER IN
POWER IN
AUDIO IN/OUT
OUT
IN
RGB IN
POWER IN
DVI INAUDIO IN/OUT
OUT
IN
RGB IN
POWER IN
DVI IN
OUT
IN
Preparations
1.2.3 Reverse Side (S24C650MW)
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
Port Description
Connect the power cord for your monitor to the [POWER IN] port on the
back of the product.
Connect to a PC using the D-SUB cable.
Connect to a PC using the DVI cable.
The [DVI IN] terminal is supplied for the digital (DVI)-dedicated models
only.
Connect to an audio output device such as headphones.
Applicable to the models that have speakers only.
Connect to an audio-input source using an audio cable.
Applicable to the models that have speakers only.
Connect the [ ] port of the monitor and the USB port of the computer
with the USB cable.
Applicable to the stand models that have USB ports only.
1 Preparations
25
1
DVI IN
POWER IN
DP IN
RGB IN
POWER IN
DVI IN
DVI IN
POWER IN
DP IN
RGB IN
POWER IN
DVI IN
Preparations
1.2.4 Reverse Side (S24C650DW)
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
Port Description
Connect the power cord for your monitor to the [POWER IN] port on the
back of the product.
Connect to a PC using the D-SUB cable.
Connect to a PC using the DVI cable.
The [DVI IN] terminal is supplied for the digital (DVI)-dedicated models
only.
Connects to a PC using a DP cable.
The [DP IN] terminal is supplied for the DP-dedicated models only.
Connect the [ ] port of the monitor and the USB port of the computer
with the USB cable.
Applicable to the stand models that have USB ports only.
1 Preparations
26
1
DVI IN
POWER IN
DVI IN
POWER IN
DP IN
AUDIO IN/OUT
OUT
IN
RGB IN
POWER IN
DVI IN
DP IN
AUDIO IN/OUT
OUT
IN
RGB IN
POWER IN
DVI IN
OUT
IN
Preparations
1.2.5 Reverse Side (S24C650XW / S27C650X)
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
Port Description
Connect the power cord for your monitor to the [POWER IN] port on the
back of the product.
Connect to a PC using the D-SUB cable.
Connect to a PC using the DVI cable.
The [DVI IN] terminal is supplied for the digital (DVI)-dedicated models
only.
Connects to a PC using a DP cable.
The [DP IN] terminal is supplied for the DP-dedicated models only.
Connect to an audio output device such as headphones.
Applicable to the models that have speakers only.
Connect to an audio-input source using an audio cable.
Applicable to the models that have speakers only.
Connect the [ ] port of the monitor and the USB port of the computer
with the USB cable.
Applicable to the stand models that have USB ports only.
1 Preparations
27
1
Preparations
1.2.6 Right Side View
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
Port Description
Connect to a USB device.
Applicable to the stand models that have USB ports only.
1 Preparations
28
Preparations
1
1.3 Installation
1.3.1 Attaching the Stand
Place a protective cloth or
cushion on a flat surface. Next,
place the product with the face
down on top of the cloth or
cushion.
Fasten the screw tightly (using a
screwdriver or coin) into the
bottom of the stand base.
Do not remove the fixing pin until
you are finished attaching the
stand.
After installing the stand, place
the product upright.
Insert the stand base into the
stand in the direction of the
arrow.
You can remove the fixing pin
and adjust the stand now.
- Caution
Do not hold the product upside
down only by the stand.
Disassembly is the reverse order of assembly.
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
1 Preparations
29
1
0(±5mm) ~
130mm(±5mm)
Preparations
1.3.2 Adjusting the Product Tilt and Height
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
To adjust the height, remove the fixing pin.
The monitor tilt and height can be adjusted.
Hold the top center of the product and adjust the height carefully.
1.3.3 Rotating the Monitor
You can rotate your monitor as shown below.
Be sure to fully extend the stand before rotating the monitor.
If you rotate the monitor without fully extending the stand, the corner of the monitor may hit the
floor and get damaged.
Do not rotate the monitor counterclockwise. The monitor may get damaged.
1 Preparations
30
1
1
A
2
3
B
4
A
B
Preparations
1.3.4 Installing a Wall-mount Kit or Desktop Stand
Before Installation
Power the product off and remove the power cable from the power socket.
Place a protective cloth or
cushion on a flat surface. Next,
place the product with the face
down on top of the cloth or
cushion.
Installing a Wall-mount Kit or Desktop Stand
Unfasten the screw from the
back of the product.
Lift and detach the stand.
Attach the wall-mount kit or desktop stand here
Bracket (sold separately)
Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding
parts on the wall-mount kit or desktop stand you want to attach.
1 Preparations
31
1
Preparations
Notes
Using a screw longer than the standard length can damage the internal components of the
product.
The length of screws required for a wall mount that does not comply with the VESA standards may
vary depending on the specifications.
Do not use screws that do not comply with the VESA standards. Do not attach the wall-mount kit
or desktop stand using excessive force. The product may get damaged or fall and cause personal
injury. Samsung shall not be held liable for any damage or injury caused by using improper screws
or attaching the wall-mount kit or desktop stand using excessive force.
Samsung shall not be held liable for any product damage or personal injury caused by using a wall-
mount kit other than the one specified or from an attempt to install the wall-mount kit on your own.
To mount the product on a wall, ensure you purchase a wall-mount kit that can be installed 10cm
or farther away from the wall.
Be sure to use a wall-mount kit that complies with the standards.
To install the monitor using a wall mount, disconnect the stand base from the monitor.
1 Preparations
32
1
Preparations
1.3.5 Anti-theft Lock
An anti-theft lock allows you to use the product securely even in public places. The locking device shape
and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft
locking device for details. The lock device is sold separately.
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
To lock an anti-theft locking device:
1 Fix the cable of your anti-theft locking device to a heavy object such as a desk.
2 Put one end of the cable through the loop on the other end.
3 Insert the locking device into the anti-theft lock slot at the back of the product.
4 Lock the locking device.
An anti-theft locking device can be purchased separately.
Refer to the user guide provided with your anti-theft locking device for details.
Anti-theft locking devices can be purchased at electronics retailers or online.
1 Preparations
33
Connecting and Using a Source Device
2
2.1 Before Connecting
2.1.1 Pre-connection Checkpoints
Before connecting a source device, read the user manual provided with it.
The number and locations of ports on source devices may differ from device to device.
Do not connect the power cable until all connections are completed.
Connecting the power cable during connection may damage the product.
Check the types of ports at the back of the product you want to connect.
2 Connecting and Using a Source Device
34
Connecting and Using a Source Device
RGB IN
RGB IN
DVI IN
DVI IN
2
2.2 Connecting and Using a PC
2.2.1 Connecting to a PC
Select a connection method suitable for your PC.
Connecting parts may differ in different products.
Connection Using the D-SUB Cable (Analog Type)
Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
1
Connect the D-SUB cable to the [RGB IN] port on the back of the product and the RGB port on the PC.
2 Press [ ] to change the input source to Analog.
Connection Using the DVI Cable
Do not connect the power cable before connecting all other cables. Ensure you connect a source
device first before connecting the power cable.
1 Connect the DVI cable to the [DVI IN] port on the back of the product and the DVI port on the PC.
2 Press [ ] to change the input source to DVI.
2 Connecting and Using a Source Device
35
2
DP IN
DP IN
OUT
IN
OUT
Connecting and Using a Source Device
Connection Using an DP Cable (S24C650DW / S24C650XW / S27C650X)
Do not connect the power cable before connecting all other cables. Ensure you connect a source
device first before connecting the power cable.
1 Connect the DP cable to the [DP IN] port on the back of the product and the DP port on the PC.
2 Press [ ] to change the input source to DisplayPort.
Connecting to Headphones or Speakers (S24C650MW / S24C650XW / S27C650X)
Do not connect the power cable before connecting all other cables. Ensure you connect a source
device first before connecting the power cable.
1 Connect an audio output device such as headphones or speakers to [ ] port on the product.
Applicable to the models that have speakers only.
2 Connecting and Using a Source Device
36
2
Connecting and Using a Source Device
Connecting USB
Applicable to the stand models that have USB ports only.
Do not connect the power cable before connecting all other cables. Ensure you connect a source
device first before connecting the power cable.
You can use a USB device such as a mouse, keyboard, Memory Stick, or external hard disk drive by
connecting them to the [ ] port of the monitor without connecting them to the PC.
The [ ] USB port of the monitor supports High-Speed Certified USB 2.0.
High speed Full speed Low speed
Data Rate 480 Mbps 12 Mbps 1.5 Mbps
Power Consumption
2.5 W
(Max., each port)
2.5 W
(Max., each port)
2.5 W
(Max., each port)
1 Connect the [ ] port of the monitor and the USB port of the computer with the USB cable.
To use [ ] port, you have to connect the UP (Upstream Cable) to the PC.
2 Connecting and Using a Source Device
37
2
A
B
USB
B
A
Connecting and Using a Source Device
Make sure to use the USB cable supplied with this monitor to connect the monitor's [ ]
port and your computer's USB port.
2 Connect the [ ] port of the USB monitor and a USB device with the USB cable.
3 The use procedures are as the same as those for using an external device connecting to the PC.
You can connect and use a keyboard and mouse.
You can play a file from a media device.
(Examples of media devices: MP3, digital camera, etc.)
You can run, move, copy or delete the files on the storage device.
(Examples of storage devices: external memory, memory card, memory reader, HDD-type MP3
player, etc.)
You can use other USB devices that can be connected to a computer.
When connecting a device to the [ ] port of the monitor, connect the device using a cable
appropriate to the device.
(For the purchase of the cable and external devices, ask the service center of the corresponding
product.)
The company is not liable for problems or damages to an external device caused by using an
unauthorized cable for the connection.
Some products do not follow the USB standard, and it may cause a malfunction of the device.
If the device malfunctions even if it is connected to the computer, contact the service center of the
device/computer.
2 Connecting and Using a Source Device
38
2
POWER IN
Connecting and Using a Source Device
2.2.2 Connecting the Power
To use the product, connect the power cable to a power outlet and the [POWER IN] port on the
product. (The input voltage is switched automatically.)
2 Connecting and Using a Source Device
39
2
→
1
2
3
4
Connecting and Using a Source Device
Changing the sound settings on Windows
Control Panel Audio Speaker Speaker Setup
→ →
2 Connecting and Using a Source Device
40
2
Connecting and Using a Source Device
2.2.3 Driver Installation
You can set the optimum resolution and frequency for this product by installing the corresponding
drivers.
An installation driver is contained on the CD supplied with the product.
If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com) and
download the file.
1 Insert the user manual CD provided with the product into the CD-ROM drive.
2 Click "Windows Driver".
3 Follow the instructions given on the screen to proceed with installation.
4 Select your product model from the list of models.
5 Go to Display Properties and check that the resolution and refresh rate are appropriate.
Refer to your Windows OS manual for further details.
2 Connecting and Using a Source Device
41
2
EXIT
AUTO
The optimal resolution for this
monitor is as follows:
**** x **** **Hz
Use the above settings to set
the resolution on your PC.
English
M
Connecting and Using a Source Device
2.2.4 Setting Optimum Resolution
An information message about setting optimum resolution will appear if you power on the product for the
first time after purchase.
Select a language on the product and change the resolution on your PC to the optimum setting.
1 Press [ ] to move to the language you want and press [ ].
2 To hide the information message, press [ ].
If the optimum resolution is not selected, the message will appear up to three times for a specified
time even when the product is turned off and on again.
The optimum resolution can also be selected in Control Panel on your PC.
ENU
2 Connecting and Using a Source Device
42
2
12
3
**** ****
**********
Connecting and Using a Source Device
2.2.5 Changing the Resolution Using a PC
Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture
quality.
The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected.
Changing the Resolution on Windows XP
Go to Control Panel Display Settings and change the resolution.
2 Connecting and Using a Source Device
43
2
12
34
***********
***********
Connecting and Using a Source Device
Changing the Resolution on Windows Vista
Go to Control Panel Personalization Display Settings and change the resolution.
2 Connecting and Using a Source Device
44
2
12
34
Connecting and Using a Source Device
Changing the Resolution on Windows 7
Go to Control Panel Display Screen Resolution and change the resolution.
2 Connecting and Using a Source Device
45
Connecting and Using a Source Device
12
34
5
2
Changing the Resolution on Windows 8
Go to Settings Control Panel Display Screen Resolution and change the resolution.
2 Connecting and Using a Source Device
46
Screen Setup
SAMSUNG
MAGIC
MENU
:
:
:
: Custom
: Auto
: Faster
:
PICTURE
Brightness
Contrast
Sharpness
Image Size
Response Time
H-Position
100
60
50
75
SAMSUNG
MAGIC
Bright
AUTO
3
Configure the screen settings such as brightness.
3.1 Brightness
You can adjust the general brightness of the picture. (Range: 0~100)
A higher value will make the picture appear brighter.
This menu is not available when Bright is set to Dynamic Contrast mode.
This menu is unavailable when Eco Saving is set.
3.1.1 Configuring Brightness
1 Press any button on the front of the product to display the Key Guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to PICTURE and press [ ] on the product.
3 Press [ ] to move to Brightness and press [ ] on the product. The following screen will
appear.
4 Adjust the Brightness using the [ ] buttons.
3 Screen Setup
47
Screen Setup
SAMSUNG
MAGIC
MENU
:
:
:
: Custom
: Auto
: Faster
:
PICTURE
100
60
50
75
SAMSUNG
MAGIC
Bright
Brightness
Contrast
Sharpness
Image Size
Response Time
H-Position
AUTO
3
3.2 Contrast
Adjust the contrast between the objects and background. (Range: 0~100)
A higher value will increase the contrast to make the object appear clearer.
This menu is not available when Bright is in Cinema or Dynamic Contrast mode.
3.2.1 Configuring Contrast
1 Press any button on the front of the product to display the Key Guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to PICTURE and press [ ] on the product.
3 Press [ ] to move to Contrast and press [ ] on the product. The following screen will
appear.
4 Adjust the Contrast using the [ ] buttons.
3 Screen Setup
48
Screen Setup
SAMSUNG
MAGIC
MENU
:
:
:
: Custom
: Auto
: Faster
:
PICTURE
100
60
75
50
SAMSUNG
MAGIC
Bright
Brightness
Contrast
Sharpness
Image Size
Response Time
H-Position
AUTO
3
3.3 Sharpness
Make the outline of objects more clear or blurry. (Range: 0~100)
A higher value will make the outline of objects clearer.
This menu is not available when Bright is in Cinema or Dynamic Contrast mode.
3.3.1 Configuring Sharpness
1 Press any button on the front of the product to display the Key Guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to PICTURE and press [ ] on the product.
3 Press [ ] to move to Sharpness and press [ ] on the product. The following screen will
appear.
4 Adjust the Sharpness using the [ ] buttons.
3 Screen Setup
49
Screen Setup
MENU
SAMSUNG
MAGIC
یࡈ࣏ࢽ
ଥࢿ
PICTURE
100
60
50
75
SAMSUNG
MAGIC
Bright
Custom
Standard
Game
Cinema
Dynamic Contrast
Brightness
Contrast
Sharpness
Image Size
Response Time
H-Position
AUTO
3
3.4 SAMSUNG MAGIC Bright
This menu provides an optimum picture quality suitable for the environment where the product will be
used.
This menu is unavailable when Eco Saving is set.
You can customize the brightness to suit your preferences.
3.4.1 Configuring SAMSUNG MAGIC Bright
1 Press any button on the front of the product to display the Key Guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to PICTURE and press [ ] on the product.
3 Press [ ] to move to Bright and press [ ] on the product. The following screen will
appear.
Custom: Customize the contrast and brightness as required.
Standard: Obtain a picture quality suitable for editing documents or using Internet.
Game: Obtain a picture quality suitable for playing games that involve many graphic effects and
dynamic movements.
Cinema: Obtain the brightness and sharpness of TVs suitable for enjoying video and DVD
content.
Dynamic Contrast: Obtain balanced brightness through automatic contrast adjustment.
4 Press [ ] to move to the option you want and press [ ].
5 The selected option will be applied.
3 Screen Setup
50
Screen Setup
MENU
:
:
:
: Custom
:
:
:
PICTURE
100
60
50
75
SAMSUNG
MAGIC
Bright
Brightness
Contrast
Sharpness
Image Size
Response Time
H-Position
Auto
Wide
AUTO
:
:
:
: Custom
:
:
:
PICTURE
100
60
50
75
SAMSUNG
MAGIC
Bright
Brightness
Contrast
Sharpness
Image Size
Response Time
H-Position
AUTO
4 : 3
16 : 9
Screen Fit
:
:
:
: Custom
:
:
:
PICTURE
100
60
50
75
SAMSUNG
MAGIC
Bright
Brightness
Contrast
Sharpness
Image Size
Response Time
H-Position
AUTO
4 : 3
Wide
Screen Fit
3
3.5 Image Size
Change the picture size.
3.5.1 Changing the Image Size
1 Press any button on the front of the product to display the Key Guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to PICTURE and press [ ] on the product.
3 Press [ ] to move to Image Size and press [ ] on the product. The following screen will
appear.
Auto: Display the picture according to the aspect ratio of the input source.
Wide: Display the picture in full screen regardless of the aspect ratio of the input source.
- The functions available on the monitor may vary depending on the model.
4:3: Display the picture with an aspect ratio of 4:3. Suitable for videos and standard broadcasts.
16:9: Display the picture with an aspect ratio of 16:9.
Wide: Display the picture in full screen regardless of the aspect ratio of the input source.
Screen Fit: Display the picture with the original aspect ratio without cutting off.
Changing the screen size is available when the following conditions are satisfied.
A digital output device is connected using the DVI/DP cable.
The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every
model can support all of these signals. ) .
3 Screen Setup
51
3
Screen Setup
This can only be set when the external input is connected through DVI/DP and PC/AV Mode
is set to AV.
4 Press [ ] to move to the option you want and press [ ].
5 The selected option will be applied.
3 Screen Setup
52
Screen Setup
MENU
Custom
Auto
PICTURE
100
60
75
SAMSUNG
MAGIC
Bright
Brightness
Contrast
Sharpness
Image Size
Response Time
H-Position
AUTO
Standard
Faster
Fastest
3
3.6 Response Time
Accelerate the panel response rate to make video appear more vivid and natural.
It is best to set Response Time to Standard or Faster when you are not viewing a movie.
The functions available on the monitor may vary depending on the model. Refer to the actual
product.
3.6.1 Configuring Response Time
1 Press any button on the front of the product to display the Key Guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to PICTURE and press [ ] on the product.
3 Press [ ] to move to Response Time and press [ ] on the product. The following screen
will appear.
4 Press [ ] to move to the option you want and press [ ].
5 The selected option will be applied.
3 Screen Setup
53
Screen Setup
MENU
:
:
:
: Custom
: Auto
: Faster
:
PICTURE
100
60
75
SAMSUNG
MAGIC
Bright
Brightness
Contrast
Sharpness
Image Size
Response Time
H-Position
AUTO
50
PICTURE
V-Position
Coarse
Fine
AUTO
50
1936
0
3
3.7 H-Position & V-Position
H-Position: Move the screen to the left or right.
V-Position: Move the screen up or down.
This menu is available in Analog mode.
This menu is only available when Image Size is set to Screen Fit in AV Mode. When a 480P or
576P or 720P or 1080P signal is input in AV mode and the monitor can display normally ,select
Screen Fit to adjust horizontal position in 0-6 levels.
3.7.1 Configuring H-Position & V-Position
1 Press any button on the front of the product to display the Key Guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to PICTURE and press [ ] on the product.
3 Press [ ] to move to H-Position or V-Position, and press [ ]. The following screen will
appear.
4 Press [ ] to configure H-Position or V-Position.
3 Screen Setup
54
Screen Setup
MENU
PICTURE
0
V-Position
Coarse
Fine
AUTO
1936
50
3
3.8 Coarse
Adjust the screen frequency.
This menu is available in Analog mode only.
3.8.1 Adjusting Coarse
1 Press any button on the front of the product to display the Key Guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to PICTURE and press [ ] on the product.
3 Press [ ] to move to Coarse and press [ ] on the product. The following screen will
appear.
4 Adjust the Coarse using the [ ] buttons.
3 Screen Setup
55
Screen Setup
MENU
PICTURE
0
V-Position
Coarse
Fine
AUTO
1936
50
3
3.9 Fine
Fine-adjust the screen to obtain a vivid picture.
3.9.1 Adjusting Fine
1 Press any button on the front of the product to display the Key Guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to PICTURE and press [ ] on the product.
3 Press [ ] to move to Fine and press [ ] on the product. The following screen will appear.
This menu is available in Analog mode only.
4 Adjust the Fine using the [ ] buttons.
3 Screen Setup
56
Configuring Tint
SAMSUNG
MAGIC
MENU
COLOR
:
:
:
:
:
Red
Green
Blue
Color Tone
Gamma
Mode1
Normal
AUTO
4
Adjust the tint of the screen. This menu is not available when Bright is set to Cinema or
Dynamic Contrast mode.
4.1 Red
Adjust the value of the color red in the picture. (Range: 0~100)
A higher value will increase the intensity of the color.
4.1.1 Configuring Red
1 Press any button on the front of the product to display the Key Guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to COLOR and press [ ] on the product.
3 Press [ ] to move to Red and press [ ] on the product. The following screen will appear.
4 Adjust the Red using the [ ] buttons.
4 Configuring Tint
57
Configuring Tint
MENU
COLOR
:
:
:
:
:
Red
Green
Blue
Color Tone
Gamma
Mode1
Normal
AUTO
4
4.2 Green
Adjust the value of the color green in the picture. (Range: 0~100)
A higher value will increase the intensity of the color.
4.2.1 Configuring Green
1 Press any button on the front of the product to display the Key Guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to COLOR and press [ ] on the product.
3 Press [ ] to move to Green and press [ ] on the product. The following screen will appear.
4 Adjust the Green using the [ ] buttons.
4 Configuring Tint
58
Configuring Tint
MENU
COLOR
:
:
:
:
:
Mode1
Normal
Red
Green
Blue
Color Tone
Gamma
AUTO
4
4.3 Blue
Adjust the value of the color blue in the picture. (Range: 0~100)
A higher value will increase the intensity of the color.
4.3.1 Configuring Blue
1 Press any button on the front of the product to display the Key Guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to COLOR and press [ ] on the product.
3 Press [ ] to move to Blue and press [ ] on the product. The following screen will appear.
4 Adjust the Blue using the [ ] buttons.
4 Configuring Tint
59
Configuring Tint
MENU
COLOR
:
:
:
:
:
ֻҖ
ࣱ
&RRO
&RRO
1RUPDO
:DUP
:DUP
&XVWRP
Red
Green
Blue
Color Tone
Gamma
AUTO
4
4.4 Color Tone
Adjust the general color tone of the picture.
4.4.1 Configuring the Color Tone Settings
1 Press any button on the front of the product to display the Key Guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to COLOR and press [ ] on the product.
3 Press [ ] to move to Color Tone and press [ ] on the product. The following screen will
appear.
Cool 2: Set the color temperature to be cooler than Cool 1.
Cool 1: Set the color temperature to be cooler than Normal mode.
Normal: Display the standard color tone.
Warm 1: Set the color temperature to be warmer than Normal mode.
Warm 2: Set the color temperature to be warmer than Warm 1.
Custom: Customize the color tone.
4 Press [ ] to move to the option you want and press [ ].
5 The selected option will be applied.
4 Configuring Tint
60
Configuring Tint
MENU
COLOR
:
:
:
:
:
ֻҖ
Normal
Mode1
Mode2
Mode3
Red
Green
Blue
Color Tone
Gamma
AUTO
4
4.5 Gamma
Adjust the mid-range brightness (Gamma) of the picture.
4.5.1 Configuring Gamma
1 Press any button on the front of the product to display the Key Guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to COLOR and press [ ] on the product.
3 Press [ ] to move to Gamma and press [ ] on the product. The following screen will
appear.
4 Press [ ] to move to the option you want and press [ ].
5 The selected option will be applied.
4 Configuring Tint
61
Resizing or Relocating the Screen
MENU
20 sec
On
MENU SETTINGS
Language
Menu H-Position
Menu V-Position
Display Time
Transparency
'HXWVFK
(QJOLVK
(VSDxRO
)UDQoDLV
,WDOLDQR
0DJ\DU
3ROVNL
3RUWXJXrV
ƧNJLjLjǁƿǀ
6YHQVND
7UNoH
ଞ˲߭
∝䇁
AUTO
ᣣᧄ⺆
5
5.1 Language
Set the menu language.
A change to the language setting will only be applied to the onscreen menu display.
It will not be applied to other functions on your PC.
5.1.1 Changing the Language
1 Press any button on the front of the product to display the Key Guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to MENU SETTINGS and press [ ] on the product.
3 Press [ ] to move to Language and press [ ] on the product. The following screen will
appear.
4 Press [ ] to move to the language you want and press [ ].
5 The selected option will be applied.
5 Resizing or Relocating the Screen
62
Resizing or Relocating the Screen
MENU
English
20 sec
On
MENU SETTINGS
Language
Menu H-Position
Menu V-Position
Display Time
Transparency
AUTO
English
20 sec
On
MENU SETTINGS
Language
Menu H-Position
Menu V-Position
Display Time
Transparency
AUTO
5
5.2 Menu H-Position & Menu V-Position
Menu H-Position: Move the menu position to the left or right.
Menu V-Position: Move the menu position up or down.
5.2.1 Configuring Menu H-Position & Menu V-Position
1 Press any button on the front of the product to display the Key Guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to MENU SETTINGS and press [ ] on the product.
3 Press [ ] to move to Menu H-Position or Menu V-Position, and press [ ]. The following
screen will appear.
4 Press [ ] to configure Menu H-Position or Menu V-Position.
5 Resizing or Relocating the Screen
63
Resizing or Relocating the Screen
MENU
English
20 sec
On
MENU SETTINGS
Language
Menu H-Position
Menu V-Position
Display Time
Transparency
AUTO
VHF
VHF
VHF
VHF
5
5.3 Display Time
Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified
period of time.
Display Time can be used to specify the time after which you want the OSD menu to disappear.
5.3.1 Configuring Display Time
1 Press any button on the front of the product to display the Key Guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to MENU SETTINGS and press [ ] on the product.
3 Press [ ] to move to Display Time and press [ ] on the product. The following screen will
appear.
4 Press [ ] to move to the option you want and press [ ].
5 The selected option will be applied.
5 Resizing or Relocating the Screen
64
Resizing or Relocating the Screen
MENU
English
20 sec
On
MENU SETTINGS
Language
Menu H-Position
Menu V-Position
Display Time
Transparency
AUTO
Off
On
5
5.4 Transparency
Set the transparency for the menu windows:
5.4.1 Changing Transparency
1 Press any button on the front of the product to display the Key Guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to MENU SETTINGS and press [ ] on the product.
3 Press [ ] to move to Transparency and press [ ] on the product. The following screen will
appear.
4 Press [ ] to move to the option you want and press [ ].
5 The selected option will be applied.
5 Resizing or Relocating the Screen
65
Setup and Reset
MENU
SETUP&RESET
Off
Off
Acceleration
Auto
Reset
Eco Saving
Off Timer
Turn Off After
PC/AV Mode
Key Repeat Time
Source Detection
AUTO
Reset all settings?
Yes No
EXIT
AUTO
6
6.1 Reset
Return all the settings for the product to the default factory settings.
6.1.1 Initializing Settings (Reset)
1 Press any button on the front of the product to display the Key Guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3 Press [ ] to move to Reset and press [ ] on the product. The following screen will appear.
4 Press [ ] to move to the option you want and press [ ].
5 The selected option will be applied.
6 Setup and Reset
66
Setup and Reset
SAMSUNG
MAGIC
MENU
SETUP&RESET
Off
Off
Acceleration
Manual
Reset
Eco Saving
Off Timer
Turn Off After
PC/AV Mode
Key Repeat Time
Source Detection
ଥࢿ
ଥࢿ
Off
AUTO
6
6.2 Eco Saving
The Eco Saving function reduces power consumption by controlling the electric current used by the
monitor panel.
This menu is not available when Bright is in Dynamic Contrast mode.
6.2.1 Configuring Eco Saving
1 Press any button on the front of the product to display the Key Guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3 Press [ ] to move to Eco Saving and press [ ] on the product. The following screen will
appear.
75% : Change the monitor power consumption to 75% of the default level.
50% : Change the monitor power consumption to 50% of the default level.
Off: Deactivate the Eco Saving function.
4 Press [ ] to move to the option you want and press [ ].
5 The selected option will be applied.
6 Setup and Reset
67
Setup and Reset
MENU
SETUP&RESET
Off
Acceleration
Manual
Reset
Eco Saving
Off Timer
Turn Off After
PC/AV Mode
Key Repeat Time
Source Detection
AUTO
Off
On
6
6.3 Off Timer
You can set the product to automatically turn off.
6.3.1 Configuring Off Timer
1 Press any button on the front of the product to display the Key Guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3 Press [ ] to move to Off Timer and press [ ] on the product. The following screen will
appear.
Off: Deactivate the off timer so that the product does not power off automatically.
On: Activate the off timer so that the product powers off automatically.
4 Press [ ] to move to the option you want and press [ ].
5 The selected option will be applied.
6 Setup and Reset
68
Setup and Reset
MENU
SETUP&RESET
Off
Acceleration
Manual
Reset
Eco Saving
Off Timer
Turn Off After
PC/AV Mode
Key Repeat Time
Source Detection
On
4h
AUTO
→
6
6.4 Turn Off After
The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the
specified number of hours.
This menu is available only when Off Timer is set to On.
6.4.1 Configuring Turn Off After
1 Press any button on the front of the product to display the Key Guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3 Press [ ] to move to Turn Off After and press [ ] on the product. The following screen will
appear.
4 Press [ ] to configure Turn Off After.
For products for the market in Europe, the Off Timer is set to automatically activate 4 hours after the
product powers on. This is done in accordance with power supply regulations. If you do not want the
timer to activate, go to MENU SETUP&RESET and set Off Timer to Off.
6 Setup and Reset
69
Setup and Reset
MENU
SETUP&RESET
Off
Acceleration
Manual
Reset
Eco Saving
Off Timer
Turn Off After
PC/AV Mode
Key Repeat Time
Source Detection
On
AUTO
4h
PC/AV Mode
DVI
AUTO
PC
AV
PC/AV Mode
DVI
DisplayPort
AUTO
PC
AV
6
6.5 PC/AV Mode
Set PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie.
This function does not support Analog mode.
Supplied for the wide models only such as 16:9 or 16:10.
If the monitor (when set to DVI or DP) is in power saving mode or is displaying the message Check
Signal Cable, press the MENU button to display the On Screen Display (OSD). You can select PC
or AV.
6.5.1 Configuring PC/AV Mode
1 Press any button on the front of the product to display the Key Guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3 Press [ ] to move to PC/AV Mode and press [ ] on the product. The following screen will
appear.
- The functions available on the monitor may vary depending on the model.
4 Press [ ] to move to the option you want and press [ ].
5 The selected option will be applied.
6 Setup and Reset
70
Setup and Reset
MENU
SETUP&RESET
Off
Acceleration
Manual
Reset
Eco Saving
Off Timer
Turn Off After
PC/AV Mode
Key Repeat Time
Source Detection
On
Acceleration
1 sec
2 sec
No Repeat
AUTO
4h
6
6.6 Key Repeat Time
Control the response rate of a button when the button is pressed.
6.6.1 Configuring Key Repeat Time
1 Press any button on the front of the product to display the Key Guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3 Press [ ] to move to Key Repeat Time and press [ ] on the product. The following screen
will appear.
Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds
only once when a button is pressed.
4 Press [ ] to move to the option you want and press [ ].
5 The selected option will be applied.
6 Setup and Reset
71
Setup and Reset
MENU
SETUP&RESET
Off
Acceleration
Reset
Eco Saving
Off Timer
Turn Off After
PC/AV Mode
Key Repeat Time
Source Detection
On
AUTO
Auto
Manual
4h
6
6.7 Source Detection
You can activate Source Detection.
6.7.1 Configuring Source Detection
1 Press any button on the front of the product to display the Key Guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3 Press [ ] to move to Source Detection and press [ ] on the product. The following
screen will appear.
Auto: The input source is automatically recognized.
Manual: Manually select an input source.
4 Press [ ] to move to the option you want and press [ ].
5 The selected option will be applied.
6 Setup and Reset
72
Setup and Reset
MENU
SETUP&RESET
Customized Key
Eco Saving
Image Size
SAMSUNG
MAGIC
Bright
AUTO
SAMSUNG
MAGIC
6
6.8 Customized Key
You can customize Customized Key as follows.
6.8.1 Configuring Customized Key
1 Press any button on the front of the product to display the Key Guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3 Press [ ] to move to Customized Key and press [ ] on the product. The following screen
will appear.
Bright - Eco Saving - Image Size
4 Press [ ] to move to the option you want and press [ ].
5 The selected option will be applied.
6 Setup and Reset
73
INFORMATION Menu and Others
MENU
SETUP&RESET
Analog
**kHz **Hz PP
**** x ****
Optimal Mode
**** x **** **Hz
PICTURE
COLOR
MENU SETTINGS
INFORMATION
AUTO
EXIT
7
7.1 INFORMATION
View the current input source, frequency and resolution.
7.1.1 Displaying INFORMATION
1 Press any button on the front of the product to display the Key Guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to INFORMATION. The current input source, frequency and resolution will
appear.
The displayed menu items may vary depending on the model.
7 INFORMATION Menu and Others
74
INFORMATION Menu and Others
Brightness
100
Contrast
75
EXIT
Volume
EXIT
50
7
7.2 Configuring Brightness and Contrast in the Initial Screen
Adjust the Brightness or Contrast setting using the [ ] buttons in the initial screen (where no OSD
menu is displayed).
1 Press any button on the front of the product (when no menu screen is displayed) to display the Key
guide. Next, press [ ]. The following screen will appear.
2 Press the [ ] button to alternate between the Brightness and Contrast settings.
3 Adjust the Brightness or Contrast setting using the [ ] buttons.
7.3 Configuring Volume in the Initial Screen
Adjust the Volume by pressing the [ ] button when the Key Guide is displayed.
1 Press any button on the front of the product (when no menu screen is displayed) to display the Key
guide. Next, press [ ]. The following screen will appear.
2 Adjust the Volume setting using the [ ] buttons.
Applicable to the models that have speakers only.
7 INFORMATION Menu and Others
75
Installing the Software
8
8.1 Magic Tune
8.1.1 What is MagicTune?
MagicTune is a software program that helps with monitor adjustments by providing comprehensive
descriptions of monitor functions and easy-to-understand guidelines.
You can adjust the product with the mouse and the keyboard without using the operating buttons of the
product.
8.1.2 Installing the Software
1 Insert the installation CD into the CD-ROM drive.
2 Select the MagicTune setup program.
If the pop-up screen for the software installation does not appear on the main screen, find and
double-click the MagicTune setup file on the CD-ROM.
3 Select the installation language and click [Next].
4 Complete the remaining software installation steps according to the instructions displayed on the
screen.
The software may not work properly if you do not restart the computer after the installation.
The MagicTune icon may not appear depending on the computer system and the product
specifications.
If the shortcut icon does not appear, press the F5 key.
Restrictions and Problems with the Installation (MagicTune™)
The installation of MagicTune™may be affected by the graphics card, motherboard and the networking
environment.
System Requirements
OS
Windows XP, Windows Vista, Windows 7, Windows 8
8 Installing the Software
76
8
Installing the Software
8.1.3 Removing the Software
You can only remove MagicTune™ through [Add or Remove Programs] in Windows.
To remove MagicTune™, complete the following steps.
1 Click [Start] select [Settings], and select [Control Panel] from the menu.
For Windows XP, click [Start], and select [Control Panel] from the menu.
2 Double-click the [Add or Remove Programs] icon in the Control Panel.
3 In the [Add/Remove] window, find and select MagicTune™so that it is highlighted.
4 Click [Change or Remove Programs] to remove the software.
5 Select [Yes] to start removing MagicTune™.
6 Wait until a message box appears informing you that the software has been removed completely.
For technical support, the FAQ (frequently asked questions) or information about the software
upgrade for MagicTune™, please visit our website(http://www.samsung.com/us/consumer/
learningresources/monitor/magetune/pop_intro.html).
8 Installing the Software
77
Installing the Software
MultiScreen
8
8.2 MultiScreen
MultiScreen enables users to use the monitor by partitioning multiple sections.
8.2.1 Installing the Software
1 Insert the installation CD into the CD-ROM drive.
2 Select the "MultiScreen" setup program.
3 When the Installation Wizard appears, click [Next].
If the pop-up screen for the software installation does not appear on the main screen, find and
double-click the "MultiScreen" setup file on the [CD-ROM].
4 Follow the instructions given on the screen to proceed with installation.
Restrictions and Problems with the Installation (MultiScreen)
The "MultiScreen" installation may be affected by the Graphics card, Motherboard and the Networking
environment.
Operating System
"OS"
"Windows 2000"
"Windows XP Home Edition"
"Windows XP Professional"
"Windows Vista 32bit"
"Windows 7 32bit"
The software may not work properly if you do not restart the computer after the installation.
The "MultiScreen" icon may not appear depending on the computer system and the product
specifications.
If the shortcut icon does not appear, press the "F5" key.
"Windows 8 32bit"
For "MultiScreen", the operating systems "Windows 2000" or later is recommended.
"Hardware"
At least 32MB of memory
At least 60MB of free space on the hard disk drive
8 Installing the Software
78
8
Installing the Software
8.2.2 Removing the Software
Click [Start], select [Settings]/[Control Panel], and then double-click [Add or Remove Programs].
Select "MultiScreen" from the program list and click the [Add/Delete] button.
8 Installing the Software
79
Installing the Software
8
8.3 MagicRotation
The MagicRotation Software from Samsung Electronics, Inc. provides the user with a rotation feature (0,
90, 180, 270 orientation) that facilitates the optimum utilization of computer display screen, better viewing
and improved user productivity.
8.3.1 Installing the Software
1 Insert the installation CD into the CD-ROM drive.
2 Select the "MagicRotation" setup program.
If the pop-up screen for the software installation does not appear on the main screen, find and
double-click the "MagicRotation" setup file on the [CD-ROM].
3 Select the installation language and click [Next].
4 Complete the remaining software installation steps according to the instructions displayed on the
screen.
Restrictions and Problems with the Installation (MagicRotation)
The installation of "MagicRotation" may be affected by the Graphics card, Motherboard and the
Networking environment.
Limitation
The software may not work properly if you do not restart the computer after the installation.
The "MagicRotation" icon may not appear depending on the computer system and the
product specifications.
If the shortcut icon does not appear, press the "F5" key.
1 The "Display Driver" should be properly loaded for the MagicRotation to work properly.
The installed "Display Driver" should be the latest driver supplied by the vendor.
2 If some applications like Windows Media Player, Real Player, etc. are not displaying movie files
properly in 90, 180 and 270 orientations then do the following :
Close the application.
Select the Orientation (90, 180, 270) you want to view the application.
Relaunch the application.
In most cases this should fix the problem.
8 Installing the Software
80
8
Installing the Software
3 User Applications using OpenGL and DirectDraw (3D drawing) will not function as per the orientation
mode selected (90, 180, 270).
e.g. 3D games
4 DOS based applications in Full Screen Mode will not function as per the orientation mode selected
(90, 180, 270).
5 Dual is not supported in Windows™ 98, ME, NT 4.0.
6 MagicRotation does not provide support for 24 bits per pixel (Bit depth/Color Quality).
7 If you are changing your Graphic Card it is recommended that you uninstall the MagicRotation
Software before doing so.
System Requirements
"OS"
"Windows™ 98 SE "
"Windows™ Me "
"Windows™ NT 4.0 "
"Windows™ 2000 "
"Windows XP Home Edition "
"Windows XP Professional "
"Windows Vista 32bit "
"Windows 7 32bit"
"Windows 8 32bit"
For MagicRotation, Windows 2000 or later is recommended.
"Hardware"
At least 128MB of memory(recommended)
At least 25MB of free space on the hard disk drive
"Service Packs"
It is recommended that your System has the latest Service Pack installed.
For Windows™ NT 4.0, it is recommended to install Internet Explorer 5.0 and above with Active
Desktop component.
For more information, refer to the website(http://www.samsung.com/us/consumer/
learningresources/monitor/magicrotation/pop_download.html).
Windows™ is registered trademark of Microsoft Corporation,Inc.
8 Installing the Software
81
8
Installing the Software
8.3.2 Removing the Software
You can only remove MagicRotation through [Add or Remove Programs] in Windows.
To remove "MagicRotation", complete the following steps.
1 Click [Start] select [Settings], and select [Control Panel] from the menu.
For Windows XP, click [Start], and select [Control Panel] from the menu.
2 Double-click the [Add or Remove Programs] icon in the Control Panel.
3 In the [Add/Remove] window, find and select MagicRotation so that it is highlighted.
4 Click [Change or Remove Programs] to remove the software.
5 Select [Yes] to start removing MagicRotation.
6 Wait until a message box appears informing you that the software has been removed completely.
For technical support, the FAQ (frequently asked questions) or information about the software upgrade
for MagicRotation, please visit our website(http://www.samsung.com/us/consumer/learningresources/
monitor/magicrotation/pop_download.html).
8 Installing the Software
82
Troubleshooting Guide
9
9.1 Requirements Before Contacting Samsung Customer Service Center
9.1.1 Testing the Product
Before calling Samsung Customer Service Center, test your product as follows.
If the problem persists, contact Samsung Customer Service Center.
Check if your product is operating normally by using the product test function.
If the screen is turned off and the power indicator blinks even though the product is properly connected
to a PC, perform a self-diagnosis test.
1 Power off both the PC and product.
2 Disconnect the cables from the product.
3 Power on the product.
4 If the message Check Signal Cable appears, the product is working normally.
9.1.2 Checking the Resolution and Frequency
For a mode that exceeds the supported resolution (refer to "10.5 Standard Signal Mode Table"), the
message Not Optimum Mode will appear for a short time.
9.1.3 Check the following.
Installation issue (PC mode)
The screen keeps switching on and off. Check the cable connection between the product
If the screen remains blank, check the PC system, video controller and cable.
Issues Solutions
and PC, and ensure the connectors are locked.
(Refer to "2.2 Connecting and Using a PC")
9 Troubleshooting Guide
83
9
Troubleshooting Guide
Screen issue
Issues Solutions
The power LED is off.
The screen will not switch on.
The message Check Signal Cable appears. Check that the cable is properly connected to the
Not Optimum Mode is displayed. This message appears if the signal from the
The images on the screen look distorted. Check the cable connection to the product
The screen is not clear. The screen is blurry. Adjust Coarse and Fine.
Check that the power cable is connected
properly.
(Refer to "2.2 Connecting and Using a PC")
product.
(Refer to "2.2 Connecting and Using a PC")
Check that the device connected to the product is
powered on.
graphics card exceeds the maximum resolution or
frequency for the product.
Change the maximum resolution and frequency to
suit the product performance, referring to
Standard Signal Mode Table (page 95).
(Refer to "2.2 Connecting and Using a PC")
Remove any accessories (video extension cable,
etc.) and try again.
Set the resolution and frequency to the
recommended level.
The screen appears unstable and shaky. Check that the resolution and frequency for the
There are shadows or ghost images left on the
screen.
The screen is too bright. The screen is too dark. Adjust Brightness and Contrast.
Screen color is inconsistent. Change the COLOR settings.
The colors on the screen have a shadow and are
distorted.
White does not really look white. Change the COLOR settings.
There is no image on the screen and the power
LED blinks every 0.5 to 1 second.
PC are within the range of resolution and
frequency compatible with the product.
Next, if required, change the settings, referring to
Standard Signal Mode Table (page 95) in this
manual and the INFORMATION menu on the
product.
Change the COLOR settings.
The product is operating in power-saving mode.
Press any key on the keyboard or move the
mouse to return to normal operating mode.
9 Troubleshooting Guide
84
9
Troubleshooting Guide
Sound issue
Issues Solutions
There is no sound. Check the connection of the audio cable or adjust
the volume.
Check the volume.
The volume is too low. Adjust the volume.
If the volume is still low after turning it up to the
maximum level, adjust the volume on your PC
sound card or software program.
Source device issue
Issues Solutions
A beeping sound is heard when my PC is booting. If a beeping sound is heard when your PC is
booting, have your PC serviced.
9 Troubleshooting Guide
85
Troubleshooting Guide
9
9.2 Q & A
Question Answer
How can I change the
frequency?
Set the frequency on your graphics card.
Windows XP: Go to Control Panel Appearance and
Themes Display Settings Advanced Monitor,
and adjust Refresh rate under Monitor settings.
Windows ME/2000: Go to Control Panel Display
Settings Advanced Monitor, and adjust Refresh rate
under Monitor settings.
Windows Vista: Go to Control Panel Appearance and
Personalization Personalization Display Settings
Advanced Settings Monitor, and adjust Refresh rate
under Monitor settings.
Windows 7: Go to Control Panel Appearance and
Personalization Display Screen Resolution
Advanced settings Monitor, and adjust Refresh rate under
Monitor settings.
Windows 8: Go to Settings Control Panel Appearance
and Personalization Display Screen Resolution
Advanced settings Monitor, and adjust Refresh rate under
Monitor settings.
9 Troubleshooting Guide
86
9
Troubleshooting Guide
Question Answer
How can I change the
resolution?
How do I set power-saving
mode?
Windows XP: Go to Control Panel Appearance and
Themes Display Settings, and adjust the resolution.
Windows ME/2000: Go to Control Panel Display
Settings, and adjust the resolution.
Windows Vista: Go to Control Panel Appearance and
Personalization Personalize Display Settings, and
adjust the resolution.
Windows 7: Go to Control Panel Appearance and
Personalization Display Adjust Resolution, and adjust
the resolution.
Windows 8: Go to Settings Control Panel Appearance
and Personalization Display Adjust Resolution, and
adjust the resolution.
Windows XP: Set power-saving mode in Control Panel
Appearance and Themes Display Screen Saver
Settings or BIOS SETUP on the PC.
Windows ME/2000: Set power-saving mode in Control Panel
Display Screen Saver Settings or BIOS SETUP on the
PC.
Windows Vista: Set power-saving mode in Control Panel
Appearance and Personalization Personalize Screen
Saver Settings or BIOS SETUP on the PC.
Windows 7: Set power-saving mode in Control Panel
Appearance and Personalization Personalize Screen
Saver Settings or BIOS SETUP on the PC.
Windows 8: Set power-saving mode in Settings Control
Panel Appearance and Personalization Personalize
Screen Saver Settings or BIOS SETUP on the PC.
Refer to the user manual for your PC or graphics card for further instructions on adjustment.
9 Troubleshooting Guide
87
Specifications
10
10.1 General (S24C650BW / S24C650MW)
Model Name S24C650BW / S24C650MW
Size 61 cm
Panel
Synchronization
Display Color 16.7 M
Resolution
Input Signal, Terminated RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB
Maximum Pixel Clock 154 MHz (Analog, Digital)
Display
area
Pixel Pitch 0.27 mm (H) x 0.27 mm (V)
Horizontal
Frequency
Vertical
Frequency
Optimum
Resolution
Maximum
Resolution
518.4 mm (H) x 324 mm (V)
30 ~ 81 kHz
56 ~ 63 Hz
1920 x 1200 @ 60 Hz
1920 x 1200 @ 60 Hz
0.7 Vp-p ± 5%
separate H/V sync, Composite, SOG
TTL level (V high ≥ 2.0V, V low ≤ 0.8V)
Power Supply AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz
Signal connectors
Without
Dimensions
(W x H x D) /
Weight
VESA Mounting Interface
Environmental
considerations
Stand
With Stand
Operating
Storage
D-sub connector
DVI-D connector
554.8 x 359.35 x 54.2 mm
Minimum: 554.8 x 382.25 x 224.0 mm / 5.75 kg
Maximum: 554.8 x 512.25 x 224.0 mm / 5.75 kg
100 mm x 100 mm
(For use with Specialty(Arm) Mounting hardware.)
Temperature : 10°C ~ 40°C (50°F ~ 104°F)
Humidity : 10 % – 80 %, non-condensing
Temperature : -20°C ~ 45°C (-4°F ~ 113°F)
Humidity : 5 % ~ 95 %, non-condensing
10 Specifications
88
10
Specifications
Model Name S24C650BW / S24C650MW
This monitor can be installed and used with any Plug-and-Play
compatible systems. Two-way data exchange between the monitor
Plug-and-Play
Panel Dots (Pixels)
The above specifications are subject to change without notice to improve quality.
This device is a Class B digital apparatus.
and PC system optimizes the monitor settings. Monitor installation
takes place automatically. However, you can customize the
installation settings if desired.
Due to the nature of the manufacturing of this product, approximately
1 pixel per million (1ppm) may be brighter or darker on the LCD panel.
This does not affect product performance.
10 Specifications
89
Specifications
10
10.2 General (S24C650DW / S24C650XW)
Model Name S24C650DW / S24C650XW
Size 61 cm
Panel
Synchronization
Display Color 16.7 M
Resolution
Input Signal, Terminated RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB,
Display
area
Pixel Pitch 0.27 mm (H) x 0.27 mm (V)
Horizontal
Frequency
Vertical
Frequency
Optimum
Resolution
Maximum
Resolution
518.4 mm (H) x 324 mm (V)
30 ~ 81 kHz
56 ~ 63 Hz
1920 x 1200 @ 60 Hz
1920 x 1200 @ 60 Hz
DP
0.7 Vp-p ± 5%
separate H/V sync, Composite, SOG
TTL level (V high ≥ 2.0V, V low ≤ 0.8V)
Maximum Pixel Clock 154 MHz (Analog, Digital)
Power Supply AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz
D-sub connector
Signal connectors
Without
Dimensions
(W x H x D) /
Weight
VESA Mounting Interface
Environmental
considerations
Stand
With Stand
Operating
Storage
DVI-D connector
DP connector
554.8 x 359.35 x 54.2 mm
Minimum: 554.8 x 387.25 x 224.0 mm / 5.75 kg
Maximum: 554.8 x 517.25 x 224.0 mm / 5.75 kg
100 mm x 100 mm
(For use with Specialty(Arm) Mounting hardware.)
Temperature : 10°C ~ 40°C (50°F ~ 104°F)
Humidity : 10 % – 80 %, non-condensing
Temperature : -20°C ~ 45°C (-4°F ~ 113°F)
Humidity : 5 % ~ 95 %, non-condensing
10 Specifications
90
10
Specifications
Model Name S24C650DW / S24C650XW
This monitor can be installed and used with any Plug-and-Play
compatible systems. Two-way data exchange between the monitor
Plug-and-Play
Panel Dots (Pixels)
The above specifications are subject to change without notice to improve quality.
This device is a Class B digital apparatus.
and PC system optimizes the monitor settings. Monitor installation
takes place automatically. However, you can customize the
installation settings if desired.
Due to the nature of the manufacturing of this product, approximately
1 pixel per million (1ppm) may be brighter or darker on the LCD panel.
This does not affect product performance.
10 Specifications
91
Specifications
10
10.3 General (S27C650X)
Model Name S27C650X
Size 68 cm
Panel
Synchronization
Display Color 16.7 M
Resolution
Input Signal, Terminated RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB, DP
Maximum Pixel Clock 148 MHz (Analog, Digital)
Display
area
Pixel Pitch 0.31125 mm (H) x 0.31125 mm (V)
Horizontal
Frequency
Vertical
Frequency
Optimum
Resolution
Maximum
Resolution
597.6 mm (H) x 336.15 mm (V)
30 ~ 81 kHz
56 ~ 75 Hz
1920 x 1080 @ 60 Hz
1920 x 1080 @ 60 Hz
0.7 Vp-p ± 5%
separate H/V sync, Composite, SOG
TTL level (V high ≥ 2.0V, V low ≤ 0.8V)
Power Supply
Signal connectors
Without
Dimensions
(W x H x D) /
Weight
VESA Mounting Interface
Stand
With Stand
This product supports 100-240 V.Since the standard voltage may
differ from country to country, please check the label on the back of
the product.
D-sub connector
DVI-D connector
DP Connector
639.0 x 378.1 x 56.7 mm
Minimum: 639.0 x 402.8 x 224.0 mm / 6.95 kg
Maximum: 639.0 x 532.8 x 224.0 mm / 6.95 kg
100 mm x 100 mm
(For use with Specialty(Arm) Mounting hardware.)
10 Specifications
92
10
Specifications
Model Name S27C650X
Operating
Environmental
considerations
Storage
Plug-and-Play
Panel Dots (Pixels)
The above specifications are subject to change without notice to improve quality.
This device is a Class B digital apparatus.
Temperature : 10°C ~ 40°C (50°F ~ 104°F)
Humidity : 10 % – 80 %, non-condensing
Temperature : -20°C ~ 45°C (-4°F ~ 113°F)
Humidity : 5 % ~ 95 %, non-condensing
This monitor can be installed and used with any Plug-and-Play
compatible systems. Two-way data exchange between the monitor
and PC system optimizes the monitor settings. Monitor installation
takes place automatically. However, you can customize the
installation settings if desired.
Due to the nature of the manufacturing of this product, approximately
1 pixel per million (1ppm) may be brighter or darker on the LCD panel.
This does not affect product performance.
10 Specifications
93
Specifications
10
10.4 PowerSaver
The power-saving function of this product reduces power consumption by switching off the screen and
changing the color of the power LED if the product is not used for a specified period of time.
The power is not turned off in power-saving mode. To switch the screen back on, press any key on the
keyboard or move the mouse. Power-saving mode functions only when the product is connected to a
PC that has a power-saving function.
PowerSaver
Power Indicator On Blinking Off
Power Consumption
(S24C650BW)
Power Consumption
(S24C650MW)
Power Consumption
(S24C650DW)
Power Consumption
(S24C650XW)
Power Consumption
(S27C650X)
The power consumption level can vary in different operating conditions or when settings are
changed. (S**C650B* / S**C650M* Model Power saving mode / Power off (Power button): Typical:
Less than 0.1 watts (Analog Input Condition), Max 0.25 watts,S**C650D* / S**C650X* Model
Power saving mode / Power off (Power button): Max 0.45 watts)
ENERGY STAR
Energy Star power is measured with the test method in the current Energy Star
®
is a US registered mark of the United States Environmental Protection Agency.
Energy Star
Power Consumption
25 watts
25 watts
25 watts Typical: 0.3 watts Typical: 0.3 watts
25 watts Typical: 0.3 watts Typical: 0.3 watts
18 watts Typical: 0.3 watts Typical: 0.3 watts
Power saving mode
Typical: Less than 0.1
watts
Typical: Less than 0.1
watts
Typical: Less than 0.1
Typical: Less than 0.1
Power off
(Power button)
watts
watts
®
Standard.
To reduce the power consumption to 0 watts, turn off the power switch on the back of the product
or disconnect the power cable. Be sure to disconnect the power cable when you will not be using
the product for an extended period of time. To reduce the power consumption to 0 watts when the
power switch is not available, disconnect the power cable.
10 Specifications
94
Specifications
10
10.5 Standard Signal Mode Table
This product can be set to only one resolution for each screen size to obtain the optimum picture
quality due to the nature of the panel. Therefore, a resolution other than the specified resolution
may degrade the picture quality. To avoid this, it is recommended that you select the optimum
resolution specified for the screen size of your product.
Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor.
If the LCD monitor does not support 85Hz, change the vertical frequency to 60Hz using the CDT
monitor before you exchange it with the LCD monitor.
If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will
automatically be adjusted. If the signal transmitted from the PC does not belong to the standard signal
modes, the screen may be blank even though the power LED turns on. In such a case, change the
settings according to the following table by referring to the graphics card user manual.
S24C650BW / S24C650MW / S24C650DW / S24C650XW
Horizontal
Resolution
VESA DMT, 640 x 480 31.469 59.940 25.175 -/-
VESA DMT, 800 x 600 35.156 56.250 36.000 +/+
VESA DMT, 800 x 600 37.879 60.317 40.000 +/+
VESA DMT, 1024 x 768 48.363 60.004 65.000 -/-
VESA DMT, 1280 x 720 45.000 60.000 74.250 +/+
VESA DMT, 1280 x 800 49.702 59.810 83.500 -/+
VESA DMT, 1280 x 1024 63.981 60.020 108.000 +/+
VESA DMT, 1440 x 900 55.935 59.887 106.500 -/+
VESA DMT, 1600 x 900RB 60.000 60.000 108.000 +/+
VESA DMT, 1680 x 1050 65.290 59.954 146.250 -/+
VESA DMT, 1920 x 1080 67.500 60.000 148.500 +/+
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
VESA DMT, 1920 x 1200RB 74.038 59.950 154.000 +/-
10 Specifications
95
10
Specifications
S27C650X
Horizontal
Display Mode
IBM, 720 x 400 31.469 70.087 28.322 -/+
MAC, 640 x 480 35.000 66.667 30.240 -/-
MAC, 832 x 624 49.726 74.551 57.284 -/-
MAC, 1152 x 870 68.681 75.062 100.000 -/-
VESA DMT, 640 x 480 31.469 59.940 25.175 -/-
VESA DMT, 640 x 480 37.861 72.809 31.500 -/-
VESA DMT, 640 x 480 37.500 75.000 31.500 -/-
VESA DMT, 800 x 600 35.156 56.250 36.000 +/+
VESA DMT, 800 x 600 37.879 60.317 40.000 +/+
VESA DMT, 800 x 600 48.077 72.188 50.000 +/+
VESA DMT, 800 x 600 46.875 75.000 49.500 +/+
VESA DMT, 1024 x 768 48.363 60.004 65.000 -/-
VESA DMT, 1024 x 768 56.476 70.069 75.000 -/-
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
VESA DMT, 1024 x 768 60.023 75.029 78.750 +/+
VESA DMT, 1152 x 864 67.500 75.000 108.000 +/+
VESA DMT, 1280 x 720 45.000 60.000 74.250 +/+
VESA DMT, 1280 x 800 49.702 59.810 83.500 -/+
VESA DMT, 1280 x 1024 63.981 60.020 108.000 +/+
VESA DMT, 1280 x 1024 79.976 75.025 135.000 +/+
VESA DMT, 1440 x 900 55.935 59.887 106.500 -/+
VESA DMT, 1600 x 900RB 60.000 60.000 108.000 +/+
VESA DMT, 1680 x 1050 65.290 59.954 146.250 -/+
VESA DMT, 1920 x 1080 67.500 60.000 148.500 +/+
Horizontal Frequency
The time required to scan a single line from the left to the right side of the screen is called a
horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency.
Horizontal frequency is measured in kHz.
Vertical Frequency
Repeating the same picture dozens of times per second allows you to view natural pictures. The
repeat frequency is called "vertical frequency" or "refresh rate" and is indicated in Hz.
10 Specifications
96
Appendix
01 8000 112 112
Bogotá 600 12 72
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care cent
U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com/us
CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca
re.
NORTH AMERICA
(English)
http://www.samsung.com/ca_fr
(French)
LATIN AMERICA
ARGENTINE 0800 333 3733 http://www.samsung.com.ar
BOLIVIA 800-10-7260 http://www.samsung.com
BRAZIL 0800-124-421(Demais cidades e
regiões)
4004-0000 (Capitais e grandes
centros)
CHILE 800-SAMSUNG (726-7864) http://www.samsung.com/cl
COLOMBIA
COSTA RICA 0-800-507-7267 http://www.samsung.com/latin
DOMINICA 1-800-751-2676 http://www.samsung.com/latin
http://www.samsung.com.br
http://www.samsung.com/co
(Spanish)
http://www.samsung.com/latin_en
(English)
(Spanish)
http://www.samsung.com/latin_en
(English)
ECUADOR 1-800-10-7267 http://www.samsung.com/latin
(Spanish)
http://www.samsung.com/latin_en
(English)
EL SALVADOR 800-6225 http://www.samsung.com/latin
(Spanish)
http://www.samsung.com/latin_en
(English)
Appendix
97
Appendix
LATIN AMERICA
GUATEMALA 1-800-299-0013 http://www.samsung.com/latin
(Spanish)
http://www.samsung.com/latin_en
(English)
HONDURAS 800-27919267 http://www.samsung.com/latin
(Spanish)
http://www.samsung.com/latin_en
(English)
JAMAICA 1-800-234-7267 http://www.samsung.com
NICARAGUA 001-800-5077267 http://www.samsung.com/latin
(Spanish)
http://www.samsung.com/latin_en
(English)
MEXICO 01-800-SAMSUNG (726-7864) http://www.samsung.com
PANAMA 800-7267 http://www.samsung.com/latin
(Spanish)
http://www.samsung.com/latin_en
(English)
PARAGUAY 009 800 542 0001 http://www.samsung.com.py
PERU 0-800-777-08 http://www.samsung.com/pe
PUERTO RICO 1-800-682-3180 http://www.samsung.com
TRINIDAD & TOBAGO 1-800-SAMSUNG (726-7864) http://www.samsung.com
URUGUAY 000 405 437 33 http://www.samsung.com
VENEZUELA 0-800-100-5303 http://www.samsung.com/ve
EUROPE
AUSTRIA 0810 - SAMSUNG
(7267864, € 0.07/min)
http://www.samsung.com
BELGIUM 02-201-24-18 http://www.samsung.com/be
(Dutch)
http://www.samsung.com/be_fr
(French)
BOSNIA 051 331 999 http://www.samsung.com
BULGARIA 07001 33 11 , share cost tariff http://www.samsung.com/bg
CROATIA 062 SAMSUNG (062 726 786) http://www.samsung.com/hr
CYPRUS 8009 4000 only from landline http://www.samsung.com/gr
Appendix
98
Appendix
0 801-172-678*
lub +48 22 607-93-33 **
EUROPE
CZECH 800 - SAMSUNG (800-726786) http://www.samsung.com
Samsung Electronics Czech and Slovak, s.r.o. V Parku 2343/24, 148 00 -
Praha 4
DENMARK 70 70 19 70 http://www.samsung.com
EIRE 0818 717100 http://www.samsung.com
ESTONIA 800-7267 http://www.samsung.com/ee
FINLAND 030-6227 515 http://www.samsung.com
FRANCE 01 48 63 00 00 http://www.samsung.com/fr
GERMANY 0180 6 SAMSUNG bzw. http://www.samsung.com
0180 6 7267864*
(*0,20 €/Anruf aus dem dt. Festnetz, aus dem
Mobilfunk max. 0,60 €/Anruf)
GREECE 80111-SAMSUNG (80111 726
7864) only from land line
(+30) 210 6897691 from mobile
and land line
HUNGARY 06-80-SAMSUNG (726-7864) http://www.samsung.com/hu
ITALIA 800-SAMSUNG (726-7864) http://www.samsung.com
LATVIA 8000-7267 http://www.samsung.com/lv
LITHUANIA 8-800-77777 http://www.samsung.com/lt
LUXEMBURG 261 03 710 http://www.samsung.com
MONTENEGRO 020 405 888 http://www.samsung.com
NETHERLANDS 0900 - SAMSUNG
(0900-7267864) (€ 0,10/Min)
NORWAY 815 56480 http://www.samsung.com
POLAND
http://www.samsung.com/gr
http://www.samsung.com
http://www.samsung.com/pl
PORTUGAL 808 20 - SAMSUNG (808 20 7267) http://www.samsung.com
ROMANIA 08008 SAMSUNG (08008 726
SERBIA 011 321 6899 http://www.samsung.com/rs
7864) TOLL FREE No.
http://www.samsung.com/ro
Appendix
99
Appendix
EUROPE
SLOVAKIA 0800 - SAMSUNG (0800-726 786) http://www.samsung.com
SPAIN 902172678 http://www.samsung.com
SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsung.com
SWITZERLAND 0848-SAMSUNG
(7267864, CHF 0.08/min)
U.K 0330 SAMSUNG (7267864) http://www.samsung.com
CIS
ARMENIA 0-800-05-555 http://www.samsung.com
AZERBAIJAN 088-55-55-555 http://www.samsung.com
BELARUS 810-800-500-55-500 http://www.samsung.com
GEORGIA 0-800-555-555 http://www.samsung.com
KAZAKHSTAN 8-10-800-500-55-500
(GSM: 7799)
KYRGYZSTAN 00-800-500-55-500 http://www.samsung.com
MOLDOVA 0-800-614-40 http://www.samsung.com
MONGOLIA +7-800-555-55-55 http://www.samsung.com
http://www.samsung.com/ch
(German)
http://www.samsung.com/ch_fr
(French)
http://www.samsung.com
RUSSIA 8-800-555-55-55 http://www.samsung.com
TADJIKISTAN 8-10-800-500-55-500 http://www.samsung.com
UKRAINE 0-800-502-000 http://www.samsung.com/ua
(Ukrainian)
http://www.samsung.com/ua_ru
(Russian)
UZBEKISTAN 8-10-800-500-55-500 http://www.samsung.com
ASIA PACIFIC
AUSTRALIA 1300 362 603 http://www.samsung.com/au
CHINA 400-810-5858 http://www.samsung.com
HONG KONG (852) 3698 4698 http://www.samsung.com/hk
(Chinese)
http://www.samsung.com/hk_en
(English)
Appendix
100
Loading...