Samsung S22E650D, S23E650D, S23E650K, S24E450F, S24E650XL user manual

...

User manual

S22E450F S22E650D S23E650D S23E650K S24E450F S24E650PL S24E650XL S24E650DW S24E650MW S24E650XW S27E650D S27E650X

The color and the appearance may differ depending on

the product, and the specifications are subject to

change without prior notice to improve the performance.

BN46-00480A-06

BEFORE USING THE

PRODUCT

PREPARATIONS 19 Checking the Components

7 Copyright

7 Icons used in this manual

8 Cleaning

9 Securing the Installation Space

9 Precautions for storage

10 Safety Precautions

10 Symbols 11 Electricity and Safety 12 Installation and Safety 14 Operation and Safety

18 Correct posture to use the product

19 Checking the Components

21 Parts

21 Frontal Buttons (S22E450F / S24E450F) 23 Frontal Buttons (S24E650PL / S24E650XL /

S24E650XW / S27E650X)

25 Frontal Buttons (S22E650D / S23E650D /

S24E650DW / S27E650D) 27 Frontal Buttons (S23E650K / S24E650MW) 29 Reverse Side (S23E650K) 30 Reverse Side (S24E650MW) 31 Reverse Side (S22E450F / S24E450F) 32 Reverse Side (S22E650D / S23E650D /

S24E650DW / S27E650D) 33 Reverse Side (S24E650XL / S24E650XW /

S27E650X) 34 Reverse Side (S24E650PL) 35 Right Side View

Table Of Contents

36 Installation

36 Attaching the Stand 37 Adjusting the Product Tilt and Height 38 Rotating the Monitor 39 Installing a Wall-mount Kit or Desktop Stand 41 Anti-theft Lock

CONNECTING AND USING

A SOURCE DEVICE

SCREEN SETUP 53 Brightness

42 Before Connecting

42 Pre-connection Checkpoints

43 Connecting and Using a PC

43 Connecting to a PC 47 Connecting the Power 51 Driver Installation 52 Setting Optimum Resolution

53 Configuring Brightness

54 Contrast

54 Configuring Contrast

55 Sharpness

55 Configuring Sharpness

56 Eye Saver Mode

56 Configuring Eye Saver Mode

57 Game Mode

57 Configuring Game Mode

58 SAMSUNG MAGIC Bright

58 Configuring SAMSUNG MAGIC Bright

60 SAMSUNG MAGIC Angle (S22E450F /

S24E450F)

60 Configuring SAMSUNG MAGIC Angle

62 SAMSUNG MAGIC Upscale

62 Configuring SAMSUNG MAGIC Upscale

Table Of Contents

63 Image Size

63 Changing the Image Size

65 HDMI Black Level (S22E450F / S24E450F

/ S23E650K / S24E650PL)

65 Configuring the HDMI Black Level Settings

66 Response Time (Except S22E450F /

S24E450F)

66 Configuring the Response Time

67 H-Position & V-Position

67 Configuring H-Position & V-Position

69 Coarse

69 Adjusting Coarse

70 Fine

70 Adjusting Fine

CONFIGURING TINT 71 Red

71 Configuring Red

72 Green

72 Configuring Green

73 Blue

73 Configuring Blue

74 Color Tone

74 Configuring the Color Tone Settings

75 Gamma

75 Configuring Gamma

RESIZING OR

RELOCATING THE

SCREEN

76 Language

76 Changing the Language

77 Menu H-Position & Menu V-Position

77 Configuring Menu H-Position & Menu V-

Position

Table Of Contents

78 Display Time

78 Configuring Display Time

79 Transparency

79 Changing Transparency

SETUP AND RESET 80 Reset All

80 Initializing Settings (Reset All)

81 Smart Eco Saving

81 Configuring Smart Eco Saving

82 Off Timer Plus

INFORMATION MENU AND

OTHERS

82 Configuring Off Timer 84 Configuring Eco Timer

86 PC/AV Mode

86 Configuring PC/AV Mode

88 Key Repeat Time

88 Configuring Key Repeat Time

89 Source Detection

89 Configuring Source Detection

90 INFORMATION

90 Displaying INFORMATION

91 Configuring Brightness, Contrast and

Sharpness from the Initial Screen

92 Configuring Volume in the Initial Screen

INSTALLING THE

SOFTWARE

93 MultiScreen

93 Installing the Software 94 Removing the Software

Table Of Contents

TROUBLESHOOTING

GUIDE

SPECIFICATIONS 100 General (S22E450F / S22E650D)

95 Requirements Before Contacting

Samsung Customer Service Center

95 Testing the Product 95 Checking the Resolution and Frequency 95 Check the following.

98 Q & A

102 General (S23E650D / S23E650K)

104 General (S24E450F)

106 General (S24E650PL / S24E650XL)

108 General (S24E650DW / S24E650MW /

S24E650XW)

110 General (S27E650D / S27E650X)

112 PowerSaver

114 Standard Signal Mode Table

APPENDIX 117 Responsibility for the Pay Service (Cost

to Customers)

117 Not a product defect 117 A Product damage caused by customer's fault 117 Others

119 Correct Disposal

119 Correct Disposal of This Product (Waste

Electrical & Electronic Equipment)

119 Extended warranty

120 Terminology

INDEX

Table Of Contents

Copyright

The contents of this manual are subject to change without notice to improve quality.

Samsung Electronics owns the copyright for this manual.

Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.

Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation.

VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.

Before Using the Product

z An administration fee may be charged if either

 (a) an engineer is called out at your request and there is no defect in the product

(i.e. where you have failed to read this user manual).

 (b) you bring the unit to a repair center and there is no defect in the product

(i.e. where you have failed to read this user manual).

z The amount of such administration charge will be advised to you before any work or home visit is

carried out.

Icons used in this manual

The following images are for reference only. Real-life situations may differ from what is shown in the images.

Before Using the Product

Cleaning

Before Using the Product

Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.

Take the following steps when cleaning.

1. Power off the monitor and computer.

2. Disconnect the power cord from the monitor.

Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock may result.

3. Wipe the monitor screen using a clean, soft and dry cloth.

z Do not apply a cleaning agent that contains alcohol,

solvent, or surfactant to the monitor.

z Do not spray water or detergent directly on the product.

4. Wet a soft and dry cloth in water and wring thoroughly to clean the exterior of the monitor.

5. Connect the power cord to the product after cleaning the product.

6. Power on the monitor and computer.

Before Using the Product

3.93 inches (10 cm)

Securing the Installation Space

z Ensure some space around the product for ventilation. An internal temperature rise may cause fire

and damage the product. Be sure to allow the amount of space as shown below or greater when installing the product.

The exterior may differ depending on the product.

Precautions for storage

Be sure to contact Samsung Customer Service Center if the inside of the monitor needs cleaning. (A service fee will be charged.)

Before Using the Product

Safety Precautions

Caution: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR

BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO

This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.

This symbol alerts you that important literature concerning operation and maintenance has been included with this product.

Caution

RISK OF ELECTRIC SHOCK DO NOT OPEN

QUALIFIED PERSONNEL.

Symbols

Warning

Caution

A serious or fatal injury may result if instructions are not followed.

Personal injury or damage to properties may result if instructions are not followed.

Activities marked by this symbol are prohibited.

Instructions marked by this symbol must be followed.

Before Using the Product

Electricity and Safety

The following images are for reference only. Real-life situations may differ from what is shown in the images.

Warning

Do not use a damaged power cord or plug, or a loose power socket.

z An electric shock or fire may result.

Do not plug many products into the same power socket.

z Otherwise, the socket may overheat and cause a fire.

Do not touch the power plug with wet hands.

z Otherwise, an electric shock may result.

Insert the power plug all the way in so it is not loose.

z An unstable connection may cause a fire.

Ensure you connect the power plug to a grounded power socket. (type 1 insulated devices only).

z An electric shock or injury may result.

Do not bend or pull the power cord with force. Do not weigh the power cord down with a heavy object.

z A damaged power cord may cause an electric shock or fire.

Do not place the power cord or product near heat sources.

z An electric shock or fire may result.

Remove foreign substances such as dust around the plug pins and power socket with a dry cloth.

z Otherwise, a fire may result.

Before Using the Product

Caution

Do not unplug the power cord when the product is in use.

z The product may become damaged by an electric shock.

Do not use the power cord for products other than authorized products supplied by Samsung.

z An electric shock or fire may result.

Keep the power socket where the power cord is connected unobstructed.

z If any problem occurs in the product, unplug the power cable to completely

cut the power to the product.

Power to the product cannot be completely cut off with the power button.

Hold the plug when disconnecting the power cord from the power socket.

z An electric shock or fire may result.

Installation and Safety

Warning

DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.

z Otherwise, a fire may result.

Avoid installing the product in a narrow space with bad ventilation, such as a bookshelf or wall closet.

z Otherwise, a fire may result due to an increased internal temperature.

Keep the plastic packaging bag for the product in a place that cannot be reached by children.

z Children may suffocate.

Before Using the Product

Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.).

z The product may fall and break or cause a personal injury.

z Using the product in an area with excess vibration may damage the product

or cause a fire.

Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke.

z An electric shock or fire may result.

Do not expose the product to direct sunlight, heat, or a hot object such as a stove.

z Otherwise, the product lifespan may be reduced, or a fire may result.

Caution

Do not install the product within the reach of young children.

z The product may fall and injure children.

Edible oil (such as soybean oil) may damage or distort the product. Keep the

product away from oil pollution.

And do not install or use the product in the kitchen or near the kitchen stove.

Take care not to drop the product when moving it.

z Otherwise, product failure or personal injury may result.

Do not set down the product on its front.

z The screen may become damaged.

When installing the product on a cabinet or shelf, make sure that the bottom edge of the front of the product is not protruding.

z The product may fall and break or cause a personal injury.

z Install the product only on cabinets or shelves of the right size.

Before Using the Product

SAMSUNG

Put down the product carefully.

z The product may fall and break or cause a personal injury.

Installing the product in an unusual place (a place exposed to a lot of fine dust, chemical substances, extreme temperatures or a significant presence of moisture, or a place where the product will operate continuously for an extended period of time) may seriously affect its performance.

z Be sure to consult Samsung Customer Service Center before installation if

you want to install the product at such a place.

Operation and Safety

Warning

High voltage runs through the product. Do not attempt to disassemble, repair, or modify the product on your own.

z An electric shock or fire may result.

z Contact Samsung Customer Service Center for repair.

To move the product, first disconnect all the cables from it, including the power cable.

z Otherwise, the power cord may be damaged and a fire or electric shock may

result.

If the product generates a strange noise, a burning smell, or smoke, remove the power cord immediately and contact Samsung Customer Service Center.

z An electric shock or fire may result.

Do not let children hang from the product or climb on top of it.

z The product may fall, and your child may become injured or seriously

harmed.

If the product falls or the exterior is damaged, power off the product, remove the power cord, and contact Samsung Customer Service Center.

z Otherwise, an electric shock or fire may result.

Do not put a heavy object, toy, or sweets on top of the product.

z The product or heavy objects may fall as children try to reach for the toy or

sweets resulting in a serious injury.

Before Using the Product

GAS

100

If there is a thunderstorm or lightning strike, turn off the power and disconnect the power cable.

z An electric shock or fire may result.

Do not drop objects on the product or apply impact.

z An electric shock or fire may result.

Do not move the product by pulling the power cord or any cable.

z Otherwise, the cable may be damaged and product failure, an electric shock

or fire may result.

If a gas leakage is found, do not touch the product or power plug. Also, ventilate the area immediately.

z Sparks can cause an explosion or fire.

Do not lift or move the product by pulling the power cord or any cable.

z Otherwise, the cable may be damaged and product failure, an electric shock

or fire may result.

Do not use or keep combustible spray or an inflammable substance near the product.

z An explosion or fire may result.

Ensure the vents are not blocked by tablecloths or curtains.

z Otherwise, a fire may result from an increased internal temperature.

Do not insert a metallic object (a chopstick, coin, hair pin, etc.) or inflammable object (paper, match, etc.) into the vent or ports of the product.

z If water or any foreign substance enters the product, be sure to power off the

product, remove the power cord, and contact Samsung Customer Service Center.

z Product failure, an electric shock or fire may result.

Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of the product.

z If water or any foreign substance enters the product, be sure to power off the

product, remove the power cord, and contact Samsung Customer Service Center.

z Product failure, an electric shock or fire may result.

Before Using the Product

-_-

Caution

Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels.

z If you are not going to use the product for an extended period of time,

activate power-saving mode or a moving-picture screen saver.

Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc.).

z Otherwise, a fire may result from accumulated dust, overheating, an electric

shock, or electric leakage.

Use the product at the recommended resolution and frequency.

z Otherwise,Your eyesight may deteriorate.

Do not put DC power adapters together.

z Otherwise, a fire may result.

Remove the plastic bag from the DC power adapter before you use it.

z Otherwise, a fire may result.

Do not let water enter the DC power device or get the device wet.

z An electric shock or fire may result.

z Avoid using the product outdoors where it can be exposed to rain or snow.

z Be careful not to get the DC power adapter wet when you wash the floor.

Do not put the DC power adapter near to any heating apparatus.

z Otherwise, a fire may result.

Keep the DC power adapter in a well-ventilated area.

Looking at the screen too close for an extended period of time can deteriorate your eyesight.

Before Using the Product

Do not hold the monitor upside-down or move it by holding the stand.

z The product may fall and break or cause a personal injury.

Do not use humidifiers or stoves around the product.

z An electric shock or fire may result.

Rest your eyes for more than 5 minutes for every 1 hour of product use.

z Eye fatigue will be relieved.

Do not touch the screen when the product has been turned on for an extended period of time as it will become hot.

Store the small accessories used with the product out of reach of children.

Exercise caution when adjusting the product angle or stand height.

z Otherwise, children's fingers or hands may become stuck and injured.

z Tilting the product excessively may cause it to fall and result in personal

injury.

Do not place heavy objects on the product.

z Product failure or personal injure may result.

When using headphones or earphones, do not turn the volume too high.

z Having the sound too loud may damage your hearing.

Before Using the Product

Correct posture to use the product

Use the product in the correct posture as follows:

z Straighten your back.

z Allow a distance of 45 to 50 cm between your eye and the screen, and look slightly

downward at the screen.

Keep your eyes directly in front of the screen.

z Adjust the angle so light does not reflect on the screen.

z Keep your forearms perpendicular to your upper arms and level with the back of

your hands.

z Keep your elbows at about a right angle.

z Adjust the height of the product so you can keep your knees bent at 90 degrees or

more, your heels attached to the floor, and your arms lower than your heart.

Before Using the Product

Preparations

1.1 Checking the Components

1.1.1 Checking the Components

z Contact the dealer from whom you purchased the product if any item is missing.

z The appearance of the components may differ from the images shown.

Components

Quick setup guide

User manual

(optional)

D-SUB cable

(optional)

Warranty card

(Not available in some locations)

Power cable

DVI cable

(optional)

Regulatory guide

(optional)

D-SUB cable

(optional)

DVI cable

(optional)

HDMI cable

(optional)

Stereo Cable

(optional)

HDMI-DVI cable

(optional)

USB cable

(optional)

DP cable

(optional)

Stand base

(optional)

1 Preparations

Preparations

Stand base

(Applicable to the stand

models that have USB ports

only.)

(optional)

Components may vary depending on the country.

Stand neck

(optional)

1 Preparations

Preparations

Key Guide

EYE

SAVERMENU SOURCE

AUTO

EYE SAVERMENU SOURCE

AUTO

SAMSUNG

MAGIC

SAMSUNG

MAGIC

1.2 Parts

1.2.1 Frontal Buttons (S22E450F / S24E450F)

The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.

Icons Description

Open or close the onscreen display (OSD) menu, or return to the parent menu.

OSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings. Enable: To lock the OSD control, press the [ ] button for 10 seconds. Disable: To unlock the locked OSD control, press the [ ] button for more than 10 seconds.

ENU

If the OSD control is locked,

Brightness

available.

The button. (The

and

Contrast

INFORMATION

Eye Saver Mode

can be adjusted. can be viewed.

function can be used by pressing the [ ]

is available even when the OSD

control is locked.)

Press [ ] to enable or disable

The items below are not available if the

z PICTURE Brightness, Game Mode, Bright, Angle

z COLOR

Eye Saver Mode

function is enable.

z SETUP&RESET Smart Eco Saving

Move to the upper or lower menu or adjust the value for an option on the OSD menu.

1 Preparations

AUTO

Preparations

Icons Description

Use this button to control the brightness, contrast and sharpness of the screen.

Confirm a menu selection.

Pressing the [ ] button when the OSD menu is not displayed will change the input source (Analog/DVI/HDMI). If you power on the

product or change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen.

This function is not available for products with an Analog interface only.

Key Guide

Press the [ ] button to automatically adjust the screen settings.

Turn the screen on or off.

When a control button on the product is pressed, the Key Guide will be displayed before the onscreen menu opens. (The guide shows the function of the button pressed.)

To access the onscreen menu when the guide is displayed, press the corresponding button again.

The Key Guide may vary depending on the function or product model. Refer to the actual product.

AUTO

z Changing the resolution in Display Properties will activate the

Auto Adjustment function.

z This function is only available in Analog mode.

1 Preparations

EYE SAVERMENU SOURCE

AUTO

Key Guide

EYE

SAVERMENU SOURCE

AUTO

EYE

SAVERMENU SOURCE

AUTO

SAMSUNG

MAGIC

Preparations

1.2.2 Frontal Buttons (S24E650PL / S24E650XL / S24E650XW / S27E650X)

The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.

Icons Description

Open or close the onscreen display (OSD) menu, or return to the parent menu.

ENU

If the OSD control is locked,

Brightness

available.

The button. (The

and

Contrast

INFORMATION

Eye Saver Mode

can be adjusted. can be viewed.

function can be used by pressing the [ ]

is available even when the OSD control

is locked.)

Press [ ] to enable or disable

The items below are not available if the

PICTURE

COLOR

Brightness, Game Mode

Eye Saver Mode

function is enable.

Bright

z SETUP&RESET Smart Eco Saving

Move to the upper or lower menu or adjust the value for an option on the OSD menu.

Use this button to control the volume or the screen brightness or contrast.

1 Preparations

AUTO

Preparations

Icons Description

Confirm a menu selection.

Pressing the [ ] button when the OSD menu is not displayed will change the input source (S24E650XL/S24E650XW/S27E650X: Analog/

DVI/DisplayPort, S24E650PL: Analog/HDMI/DisplayPort). If you power

on the product or change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen.

This function is not available for products with an Analog interface only.

Press the [ ] button to automatically adjust the screen settings.

z Changing the resolution in Display Properties will activate the

Auto Adjustment function.

Key Guide

z This function is only available in Analog mode.

Turn the screen on or off.

When a control button on the product is pressed, the Key Guide will be displayed before the onscreen menu opens. (The guide shows the function of the button pressed.)

To access the onscreen menu when the guide is displayed, press the corresponding button again.

The Key Guide may vary depending on the function or product model. Refer to the actual product.

1 Preparations

Key Guide

EYE

SAVERMENU SOURCE

AUTO

EYE SAVERMENU SOURCE

AUTO

SAMSUNG

MAGIC

Preparations

1.2.3 Frontal Buttons (S22E650D / S23E650D / S24E650DW / S27E650D)

The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.

Icons Description

Open or close the onscreen display (OSD) menu, or return to the parent menu.

ENU

If the OSD control is locked,

Brightness

available.

The button. (The

and

Contrast

INFORMATION

Eye Saver Mode

can be adjusted. can be viewed.

function can be used by pressing the [ ]

is available even when the OSD control

is locked.)

Press [ ] to enable or disable

The items below are not available if the

z PICTURE Brightness, Game Mode, Bright

z COLOR

Eye Saver Mode

function is enable.

z SETUP&RESET Smart Eco Saving

Move to the upper or lower menu or adjust the value for an option on the OSD menu.

Use this button to control the brightness, contrast and sharpness of the screen.

1 Preparations

AUTO

Preparations

Icons Description

Confirm a menu selection.

Pressing the [ ] button when the OSD menu is not displayed will change the input source (Analog/DVI/DisplayPort). If you power on the

product or change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen.

This function is not available for products with an Analog interface only.

Press the [ ] button to automatically adjust the screen settings.

z Changing the resolution in Display Properties will activate the

Auto Adjustment function.

Key Guide

z This function is only available in Analog mode.

Turn the screen on or off.

When a control button on the product is pressed, the Key Guide will be displayed before the onscreen menu opens. (The guide shows the function of the button pressed.)

To access the onscreen menu when the guide is displayed, press the corresponding button again.

The Key Guide may vary depending on the function or product model. Refer to the actual product.

1 Preparations

EYE SAVERMENU SOURCE

AUTO

Key Guide

EYE

SAVERMENU SOURCE

AUTO

EYE

SAVERMENU SOURCE

AUTO

SAMSUNG

MAGIC

SAMSUNG

MAGIC

Preparations

1.2.4 Frontal Buttons (S23E650K / S24E650MW)

The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.

Icons Description

Open or close the onscreen display (OSD) menu, or return to the parent menu.

ENU

If the OSD control is locked,

Brightness

available.

The button. (The

and

Contrast

INFORMATION

Eye Saver Mode

can be adjusted. can be viewed.

function can be used by pressing the [ ]

is available even when the OSD control

is locked.)

Press [ ] to enable or disable

The items below are not available if the

z PICTURE Brightness, Game Mode, Bright, Angle

z COLOR

Eye Saver Mode

function is enable.

z SETUP&RESET Smart Eco Saving

Move to the upper or lower menu or adjust the value for an option on the OSD menu.

Use this button to control the volume or the screen brightness or contrast.

1 Preparations

AUTO

Preparations

Icons Description

Confirm a menu selection.

Pressing the [ ] button when the OSD menu is not displayed will change the input source (S23E650K: Analog/HDMI, S24E650MW:

Analog/DVI). If you power on the product or change the input source by

pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen.

This function is not available for products with an Analog interface only.

Press the [ ] button to automatically adjust the screen settings.

Changing the resolution in Display Properties will activate the

Auto Adjustment function.

Key Guide

This function is only available in

Turn the screen on or off.

When a control button on the product is pressed, the Key Guide will be displayed before the onscreen menu opens. (The guide shows the function of the button pressed.)

To access the onscreen menu when the guide is displayed, press the corresponding button again.

The Key Guide may vary depending on the function or product model.

Refer to the actual product.

Analog

mode.

1 Preparations

HDMI IN

RGB IN AUDIO IN/OUT

POWER IN

AUDIO IN/OUT

OUT

RGB IN

POWER IN

HDMI IN

POWER IN

HDMI IN

RGB IN AUDIO IN/OUT

AUDIO IN/OUT

OUT

RGB IN

POWER IN

HDMI IN

OUT

Preparations

1.2.5 Reverse Side (S23E650K)

The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.

HDMI IN

GB INAUDIO IN/OUT

WER I

GB INAUDIO IN/OUT

Port Description

Connect to a source device using an HDMI cable.

Connect to a PC using the D-SUB cable.

Connect to an audio output device such as headphones.

Applicable to the models that have speakers only.

Connect to an audio-input source using an audio cable.

Applicable to the models that have speakers only.

WER I

Connect to an external device.

Connect the [ ] port of the monitor and the USB port of the

computer with the USB cable.

Applicable to the stand models that have USB ports only.

Connect the power cord for your monitor to the [POWER IN] port on the back of the product.

1 Preparations

DVI IN

RGB IN AUDIO IN/OUT

POWER IN

AUDIO IN/OUT

OUT

RGB IN

POWER IN

DVI IN

POWER IN

DVI IN

RGB IN

AUDIO IN/OUT

OUT

RGB INDVI IN

OUT

Preparations

1.2.6 Reverse Side (S24E650MW)

The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.

VI IN

GB INAUDIO IN/OU

WER I

GB IN

Port Description

Connect to a PC using the DVI cable.

The [DVI IN] terminal is supplied for the digital (DVI)-dedicated models only.

Connect to a PC using the D-SUB cable.

Connect to an audio output device such as headphones.

Applicable to the models that have speakers only.

Connect to an audio-input source using an audio cable.

Applicable to the models that have speakers only.

AUDIO IN/OU

WER I

Connect to an external device.

Connect the [ ] port of the monitor and the USB port of the

computer with the USB cable.

Applicable to the stand models that have USB ports only.

Connect the power cord for your monitor to the [POWER IN] port on the back of the product.

1 Preparations

+ 93 hidden pages