Samsung S19E200BR, S19E200BW, S19E200NW, S19E200NY, S19E450BR User Manual

...

User manual

S19E200BR S19E200BW S19E200NW S19E200NY S19E450BR S19E450BW S19E450MR S19E450MW S22E200B S22E200BW S22E200N S22E200NY S22E450B S22E450BW S22E450D S22E450DW S22E450M S22E450MW S23E200B S23E450B S24E200BL S24E450B S24E450BL S24E450D S24E450DL S24E450M S24E650BW S27E450B S27E450D

The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.

BN46-00478A-15

BEFORE USING THE

PRODUCT

PREPARATIONS 20 Checking the Components

8 Copyright

8 Icons used in this manual

9 Cleaning

10 Securing the Installation Space

10 Precautions for storage

11 Safety Precautions

11 Symbols 12 Electricity and Safety 13 Installation and Safety 15 Operation and Safety

19 Correct posture to use the product

20 Checking the Components

22 Parts

22 Frontal Buttons (SE200 Series) 24 Frontal Buttons (S**E450B*, S**E650B*) 26 Frontal Buttons (S**E450M*) 28 Frontal Buttons (S**E450D*) 30 Reverse Side (SE200 Series) 31 Reverse Side (S**E450B*, S**E650B*) 32 Reverse Side (S**E450M*) 33 Reverse Side ( S**E450D*) 34 Right Side View (S**E450D*)

35 Installation

35 Attaching the Stand (SE200 Series) 36 Attaching the Stand (SE450, SE650 Series) 37 Removing the Stand (SE200 Series) 38 Adjusting the Product Tilt (SE200 Series) 39 Adjusting the Product Tilt and Height (SE450,

SE650 Series) 40 Rotating the Monitor (SE450, SE650 Series) 41 Installing a Wall-mount Kit or Desktop Stand 44 Anti-theft Lock

Table Of Contents

CONNECTING AND USING

A SOURCE DEVICE

SCREEN SETUP 57 Brightness

45 Before Connecting

45 Pre-connection Checkpoints

46 Connecting and Using a PC

46 Connecting to a PC 51 Connecting the Power 55 Driver Installation 56 Setting Optimum Resolution

57 Configuring Brightness

58 Contrast

58 Configuring Contrast

59 Sharpness

59 Configuring Sharpness

60 Eye Saver Mode

60 Configuring Eye Saver Mode

61 Game Mode

61 Configuring Game Mode

62 SAMSUNG MAGIC Bright

62 Configuring SAMSUNG MAGIC Bright

63 SAMSUNG MAGIC Angle (Except

S19E200NY / S22E200NY / S24E650BW)

63 Configuring SAMSUNG MAGIC Angle

65 SAMSUNG MAGIC Upscale

65 Configuring SAMSUNG MAGIC Upscale

66 Image Size (Except S19E200BR /

S19E450BR / S19E450MR)

66 Changing the Image Size

68 Response Time (S24E650BW)

68 Configuring the Response Time

Table Of Contents

69 H-Position & V-Position

69 Configuring H-Position & V-Position

70 Coarse

70 Adjusting Coarse

71 Fine

71 Adjusting Fine

CONFIGURING TINT 72 Red

72 Configuring Red

73 Green

RESIZING OR

RELOCATING THE

SCREEN

73 Configuring Green

74 Blue

74 Configuring Blue

75 Color Tone

75 Configuring the Color Tone Settings

76 Gamma

76 Configuring Gamma

77 Language

77 Changing the Language

78 Menu H-Position & Menu V-Position

78 Configuring Menu H-Position & Menu V-

Position

79 Display Time

79 Configuring Display Time

80 Transparency

80 Changing Transparency

SETUP AND RESET 81 Reset All

81 Initializing Settings (Reset All)

Table Of Contents

82 Smart Eco Saving

82 Configuring Smart Eco Saving

83 Off Timer (S19E200NW / S19E200NY /

S22E200N /S22E200NY)

83 Configuring Off Timer 84 Configuring Turn Off After

85 Off Timer Plus (Except S19E200NW /

S19E200NY / S22E200N / S22E200NY)

85 Configuring Off Timer 87 Configuring Eco Timer

89 PC/AV Mode (Except S19E200NW /

S19E200NY / S22E200N / S22E200NY)

INFORMATION MENU AND

OTHERS

INSTALLING THE

SOFTWARE

89 Configuring PC/AV Mode

91 Key Repeat Time

91 Configuring Key Repeat Time

92 Source Detection (Except S19E200NW /

S19E200NY / S22E200N / S22E200NY)

92 Configuring Source Detection

93 INFORMATION

93 Displaying INFORMATION

94 Configuring Brightness, Contrast and

Sharpness from the Initial Screen

95 Configuring Volume in the Initial Screen

96 MultiScreen

96 Installing the Software 97 Removing the Software

Table Of Contents

TROUBLESHOOTING

GUIDE

SPECIFICATIONS 103 General (S19E200NY / S19E200NW)

98 Requirements Before Contacting

Samsung Customer Service Center

98 Testing the Product 98 Checking the Resolution and Frequency 98 Check the following.

101 Q & A

104 General (S19E200BW / S19E200BR)

105 General (S22E200NY)

106 General (S22E200B / S22E200N /

S22E200BW)

107 General (S23E200B / S24E200BL)

108 General (S19E450BW / S19E450MW /

S19E450BR / S19E450MR)

109 General (S22E450B / S22E450M /

S22E450D)

110 General (S22E450BW / S22E450MW /

S22E450DW)

111 General (S23E450B)

112 General (S24E450BL / S24E450DL)

113 General (S24E450B / S24E450M /

S24E450D)

114 General (S24E650BW)

115 General (S27E450B / S27E450D)

116 PowerSaver

120 Standard Signal Mode Table

Table Of Contents

APPENDIX

INDEX

128 Responsibility for the Pay Service (Cost

to Customers)

128 Not a product defect 128 A Product damage caused by customer's fault 128 Others

130 Correct Disposal

130 Correct Disposal of This Product (Waste

Electrical & Electronic Equipment)

130 Extended warranty

131 Terminology

Table Of Contents

Copyright

The contents of this manual are subject to change without notice to improve quality.

Samsung Electronics owns the copyright for this manual.

Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.

Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation.

VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.

Before Using the Product

Icons used in this manual

The following images are for reference only. Real-life situations may differ from what is shown in the images.

Before Using the Product

Cleaning

Before Using the Product

Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.

Take the following steps when cleaning.

1. Power off the monitor and computer.

2. Disconnect the power cord from the monitor.

Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock may result.

3. Wipe the monitor screen using a clean, soft and dry cloth.

 Do not apply a cleaning agent that contains alcohol,

solvent, or surfactant to the monitor.

 Do not spray water or detergent directly on the product.

4. Wet a soft and dry cloth in water and wring thoroughly to clean the exterior of the monitor.

5. Connect the power cord to the product after cleaning the product.

6. Power on the monitor and computer.

Before Using the Product

10 cm

10 cm 10 cm

10 cm

10 cm 10 cm

10 cm

Securing the Installation Space

 Ensure some space around the product for ventilation. An internal temperature rise may cause fire

and damage the product. Be sure to allow the amount of space as shown below or greater when installing the product.

The exterior may differ depending on the product.

SE200 Series

SE450, SE650 Series

Precautions for storage

Be sure to contact Samsung Customer Service Center if the inside of the monitor needs cleaning. (A service fee will be charged.)

Before Using the Product

Safety Precautions

Caution: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR

BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO

This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.

This symbol alerts you that important literature concerning operation and maintenance has been included with this product.

Caution

RISK OF ELECTRIC SHOCK DO NOT OPEN

QUALIFIED PERSONNEL.

Symbols

Warning

Caution

A serious or fatal injury may result if instructions are not followed.

Personal injury or damage to properties may result if instructions are not followed.

Activities marked by this symbol are prohibited.

Instructions marked by this symbol must be followed.

Before Using the Product

Electricity and Safety

The following images are for reference only. Real-life situations may differ from what is shown in the images.

Warning

Do not use a damaged power cord or plug, or a loose power socket.

 An electric shock or fire may result.

Do not plug many products into the same power socket.

 Otherwise, the socket may overheat and cause a fire.

Do not touch the power plug with wet hands.

 Otherwise, an electric shock may result.

Insert the power plug all the way in so it is not loose.

 An unstable connection may cause a fire.

Ensure you connect the power plug to a grounded power socket. (type 1 insulated devices only).

 An electric shock or injury may result.

Do not bend or pull the power cord with force. Do not weigh the power cord down with a heavy object.

 A damaged power cord may cause an electric shock or fire.

Do not place the power cord or product near heat sources.

 An electric shock or fire may result.

Remove foreign substances such as dust around the plug pins and power socket with a dry cloth.

 Otherwise, a fire may result.

Before Using the Product

Caution

Do not unplug the power cord when the product is in use.

 The product may become damaged by an electric shock.

Do not use the power cord for products other than authorized products supplied by Samsung.

 An electric shock or fire may result.

Keep the power socket where the power cord is connected unobstructed.

 If any problem occurs in the product, unplug the power cable to completely

cut the power to the product.

Power to the product cannot be completely cut off with the power button.

Hold the plug when disconnecting the power cord from the power socket.

 An electric shock or fire may result.

Installation and Safety

Warning

DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.

 Otherwise, a fire may result.

Avoid installing the product in a narrow space with bad ventilation, such as a bookshelf or wall closet.

 Otherwise, a fire may result due to an increased internal temperature.

Keep the plastic packaging bag for the product in a place that cannot be reached by children.

 Children may suffocate.

Before Using the Product

Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.).

 The product may fall and break or cause a personal injury.

 Using the product in an area with excess vibration may damage the product

or cause a fire.

Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke.

 An electric shock or fire may result.

Do not expose the product to direct sunlight, heat, or a hot object such as a stove.

 Otherwise, the product lifespan may be reduced, or a fire may result.

Caution

Do not install the product within the reach of young children.

 The product may fall and injure children.

Edible oil (such as soybean oil) may damage or distort the product. Keep the

product away from oil pollution.

And do not install or use the product in the kitchen or near the kitchen stove.

Take care not to drop the product when moving it.

 Otherwise, product failure or personal injury may result.

Do not set down the product on its front.

 The screen may become damaged.

When installing the product on a cabinet or shelf, make sure that the bottom edge of the front of the product is not protruding.

 The product may fall and break or cause a personal injury.

 Install the product only on cabinets or shelves of the right size.

Before Using the Product

SAMSUNG

Put down the product carefully.

 The product may fall and break or cause a personal injury.

Installing the product in an unusual place (a place exposed to a lot of fine dust, chemical substances, extreme temperatures or a significant presence of moisture, or a place where the product will operate continuously for an extended period of time) may seriously affect its performance.

 Be sure to consult Samsung Customer Service Center before installation if

you want to install the product at such a place.

Operation and Safety

Warning

High voltage runs through the product. Do not attempt to disassemble, repair, or modify the product on your own.

 An electric shock or fire may result.

 Contact Samsung Customer Service Center for repair.

To move the product, first disconnect all the cables from it, including the power cable.

 Otherwise, the power cord may be damaged and a fire or electric shock may

result.

If the product generates a strange noise, a burning smell, or smoke, remove the power cord immediately and contact Samsung Customer Service Center.

 An electric shock or fire may result.

Do not let children hang from the product or climb on top of it.

 The product may fall, and your child may become injured or seriously

harmed.

If the product falls or the exterior is damaged, power off the product, remove the power cord, and contact Samsung Customer Service Center.

 Otherwise, an electric shock or fire may result.

Do not put a heavy object, toy, or sweets on top of the product.

 The product or heavy objects may fall as children try to reach for the toy or

sweets resulting in a serious injury.

Before Using the Product

GAS

100

If there is a thunderstorm or lightning strike, turn off the power and disconnect the power cable.

 An electric shock or fire may result.

Do not drop objects on the product or apply impact.

 An electric shock or fire may result.

Do not move the product by pulling the power cord or any cable.

 Otherwise, the cable may be damaged and product failure, an electric shock

or fire may result.

If a gas leakage is found, do not touch the product or power plug. Also, ventilate the area immediately.

 Sparks can cause an explosion or fire.

Do not lift or move the product by pulling the power cord or any cable.

 Otherwise, the cable may be damaged and product failure, an electric shock

or fire may result.

Do not use or keep combustible spray or an inflammable substance near the product.

 An explosion or fire may result.

Ensure the vents are not blocked by tablecloths or curtains.

 Otherwise, a fire may result from an increased internal temperature.

Do not insert a metallic object (a chopstick, coin, hair pin, etc.) or inflammable object (paper, match, etc.) into the vent or ports of the product.

 If water or any foreign substance enters the product, be sure to power off the

product, remove the power cord, and contact Samsung Customer Service Center.

 Product failure, an electric shock or fire may result.

Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of the product.

 If water or any foreign substance enters the product, be sure to power off the

product, remove the power cord, and contact Samsung Customer Service Center.

 Product failure, an electric shock or fire may result.

Before Using the Product

-_-

Caution

Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels.

 If you are not going to use the product for an extended period of time,

activate power-saving mode or a moving-picture screen saver.

Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc.).

 Otherwise, a fire may result from accumulated dust, overheating, an electric

shock, or electric leakage.

Use the product at the recommended resolution and frequency.

 Otherwise,Your eyesight may deteriorate.

Do not put DC power adapters together.

 Otherwise, a fire may result.

Remove the plastic bag from the DC power adapter before you use it.

 Otherwise, a fire may result.

Do not let water enter the DC power device or get the device wet.

 An electric shock or fire may result.

 Avoid using the product outdoors where it can be exposed to rain or snow.

 Be careful not to get the DC power adapter wet when you wash the floor.

Do not put the DC power adapter near to any heating apparatus.

 Otherwise, a fire may result.

Keep the DC power adapter in a well-ventilated area.

If you place the AC/DC power adapter so that it is hanging with the cord input facing upwards, water or other foreign substances could enter the Adapter and cause the Adapter to malfunction.

Make sure to rest the AC/DC power adapter flat on a table or the floor.

Before Using the Product

Looking at the screen too close for an extended period of time can deteriorate your eyesight.

Do not hold the monitor upside-down or move it by holding the stand.

 The product may fall and break or cause a personal injury.

Do not use humidifiers or stoves around the product.

 An electric shock or fire may result.

Rest your eyes for more than 5 minutes for every 1 hour of product use.

 Eye fatigue will be relieved.

Do not touch the screen when the product has been turned on for an extended period of time as it will become hot.

Store the small accessories used with the product out of reach of children.

Exercise caution when adjusting the product angle or stand height.

 Otherwise, children's fingers or hands may become stuck and injured.

 Tilting the product excessively may cause it to fall and result in personal

injury.

Do not place heavy objects on the product.

 Product failure or personal injure may result.

When using headphones or earphones, do not turn the volume too high.

 Having the sound too loud may damage your hearing.

Before Using the Product

Correct posture to use the product

Use the product in the correct posture as follows:

 Straighten your back.

 Allow a distance of 45 to 50 cm between your eye and the screen, and look slightly

downward at the screen.

Keep your eyes directly in front of the screen.

 Adjust the angle so light does not reflect on the screen.

 Keep your forearms perpendicular to your upper arms and level with the back of

your hands.

 Keep your elbows at about a right angle.

 Adjust the height of the product so you can keep your knees bent at 90 degrees or

more, your heels attached to the floor, and your arms lower than your heart.

Before Using the Product

Preparations

1.1 Checking the Components

1.1.1 Checking the Components

 Contact the dealer from whom you purchased the product if any item is missing.

 The pictures may look different from the actual components.

Components

Quick setup guide

User manual

(optional)

D-SUB cable

(optional)

Warranty card (Not available in

some locations)

Power cable

DVI cable

(optional)

Regulatory guide

(optional)

D-SUB cable

(optional)

DVI cable

(optional)

HDMI-DVI cable

(optional)

DP cable

(optional)

Stereo Cable

For S**E450M* Model

(optional)

1 Preparations

Preparations

USB cable

(optional)

Stand base

For SE450 Series Model

(Applicable to the stand

models that have USB ports

only.)

(optional)

Components may vary depending on the country.

For SE200 Series Model

Stand base

For SE450 Series Model,

For SE650 Series Model

(optional)

Stand neck

For SE450 Series Model,

For SE650 Series Model

(optional)

1 Preparations

Preparations

Key Guide

EYE

SAVERMENU SOURCE

AUTO

EYE SAVERMENU SOURCE

AUTO

SAMSUNG

MAGIC

SAMSUNG

MAGIC

1.2 Parts

1.2.1 Frontal Buttons (SE200 Series)

The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.

Icons Description



Open or close the onscreen display (OSD) menu, or return to the parent menu.



OSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings. Enable: To lock the OSD control, press the [ ] button for 10 seconds. Disable: To unlock the locked OSD control, press the [ ] button for more than 10 seconds.

ENU

If the OSD control is locked,

 Brightness and Contrast can be adjusted. Eye Saver Mode is

available. INFORMATION can be viewed.



The

Eye Saver Mode

button. (The

Eye Saver Mode

function can be used by pressing the [ ]

is available even when the OSD

control is locked.)

Press [ ] to enable or disable

The items below are not available if the



PICTURE

COLOR

Brightness, Game Mode

Eye Saver Mode

function is enable.

Bright

Angle



SETUP&RESET

Move to the upper or lower menu or adjust the value for an option on the OSD menu.

Smart Eco Saving

1 Preparations

AUTO

Preparations

Icons Description

Use this button to control the brightness, contrast and sharpness of the screen.

Confirm a menu selection.

Pressing the [ ] button when the OSD menu is not displayed will change the input source (Analog/DVI). If you power on the product or

change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen.

This function is not available for products with an Analog interface only.

Key Guide

Press the [ ] button to automatically adjust the screen settings.

Turn the screen on or off.

When a control button on the product is pressed, the Key Guide will be displayed before the onscreen menu opens. (The guide shows the function of the button pressed.)

To access the onscreen menu when the guide is displayed, press the corresponding button again.

The Key Guide may vary depending on the function or product model. Refer to the actual product.

AUTO

 Changing the resolution in Display Properties will activate the

Auto Adjustment function.

 This function is only available in Analog mode.

1 Preparations

Key Guide

EYE

SAVERMENU SOURCE

AUTO

SAMSUNG

MAGIC

SAMSUNG

MAGIC

Preparations

1.2.2 Frontal Buttons (S**E450B*, S**E650B*)

The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.

Icons Description



Open or close the onscreen display (OSD) menu, or return to the parent menu.



If the OSD control is locked,

 Brightness and Contrast can be adjusted. Eye Saver Mode is

available. INFORMATION can be viewed.



The

Eye Saver Mode

button. (The control is locked.)

Eye Saver Mode

Press [ ] to enable or disable

The items below are not available if the



PICTURE

COLOR

Brightness, Game Mode

ENU

function can be used by pressing the [ ]

is available even when the OSD

Eye Saver Mode

function is enable.

Bright

Angle



SETUP&RESET

Smart Eco Saving

Move to the upper or lower menu or adjust the value for an option on the OSD menu.

Use this button to control the brightness, contrast and sharpness of the screen.

1 Preparations

AUTO

Preparations

Icons Description

Confirm a menu selection.

Pressing the [ ] button when the OSD menu is not displayed will change the input source (Analog/DVI). If you power on the product or

change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen.

This function is not available for products with an Analog interface only.

Key Guide

Press the [ ] button to automatically adjust the screen settings.

Turn the screen on or off.

When a control button on the product is pressed, the Key Guide will be displayed before the onscreen menu opens. (The guide shows the function of the button pressed.)

To access the onscreen menu when the guide is displayed, press the corresponding button again.

The Key Guide may vary depending on the function or product model. Refer to the actual product.

AUTO

 Changing the resolution in Display Properties will activate the

Auto Adjustment function.

 This function is only available in Analog mode.

1 Preparations

Key Guide

EYE

SAVERMENU SOURCE

AUTO

EYE

SAVERMENU SOURCE

AUTO

SAMSUNG

MAGIC

SAMSUNG

MAGIC

Preparations

1.2.3 Frontal Buttons (S**E450M*)

The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.

Icons Description



Open or close the onscreen display (OSD) menu, or return to the parent menu.



ENU

If the OSD control is locked,

 Brightness and Contrast can be adjusted. Eye Saver Mode is

available. INFORMATION can be viewed.



The

Eye Saver Mode

button. (The

Eye Saver Mode

function can be used by pressing the [ ]

is available even when the OSD control

is locked.)

Press [ ] to enable or disable

The items below are not available if the



PICTURE

COLOR

Brightness, Game Mode

Eye Saver Mode

function is enable.

Bright

Angle



SETUP&RESET

Smart Eco Saving

Move to the upper or lower menu or adjust the value for an option on the OSD menu.

Use this button to control the brightness and contrast of the screen.

Volume can be adjusted if a cable is connected to the [IN] port.

1 Preparations

AUTO

Preparations

Icons Description

Confirm a menu selection.

Pressing the [ ] button when the OSD menu is not displayed will change the input source (Analog/DVI). If you power on the product or

change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen.

This function is not available for products with an Analog interface only.

Press the [ ] button to automatically adjust the screen settings.

 Changing the resolution in Display Properties will activate the

Auto Adjustment function.

Key Guide

 This function is only available in Analog mode.

Turn the screen on or off.

When a control button on the product is pressed, the Key Guide will be displayed before the onscreen menu opens. (The guide shows the function of the button pressed.)

To access the onscreen menu when the guide is displayed, press the corresponding button again.

The Key Guide may vary depending on the function or product model. Refer to the actual product.

1 Preparations

Key Guide

EYE

SAVERMENU SOURCE

AUTO

SAMSUNG

MAGIC

SAMSUNG

MAGIC

Preparations

1.2.4 Frontal Buttons (S**E450D*)

The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.

Icons Description



Open or close the onscreen display (OSD) menu, or return to the parent menu.



If the OSD control is locked,

 Brightness and Contrast can be adjusted. Eye Saver Mode is

available. INFORMATION can be viewed.



The

Eye Saver Mode

button. (The is locked.)

Eye Saver Mode

Press [ ] to enable or disable

The items below are not available if the



PICTURE

COLOR

Brightness, Game Mode

ENU

function can be used by pressing the [ ]

is available even when the OSD control

Eye Saver Mode

function is enable.

Bright

Angle



SETUP&RESET

Smart Eco Saving

Move to the upper or lower menu or adjust the value for an option on the OSD menu.

Use this button to control the brightness, contrast and sharpness of the screen.

1 Preparations

AUTO

Preparations

Icons Description

Confirm a menu selection.

Pressing the [ ] button when the OSD menu is not displayed will change the input source (

change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen.

This function is not available for products with an Analog interface only.

Press the [ ] button to automatically adjust the screen settings.



Analog/DVI/DisplayPort

Changing the resolution in Display Properties will activate the

Adjustment

function.

). If you power on the product or

Auto

Key Guide



This function is only available in

Turn the screen on or off.

When a control button on the product is pressed, the Key Guide will be displayed before the onscreen menu opens. (The guide shows the function of the button pressed.)

To access the onscreen menu when the guide is displayed, press the corresponding button again.

The Key Guide may vary depending on the function or product model.

Refer to the actual product.

Analog

mode.

1 Preparations

DVI IN RGB IN

POWER IN

RGB INDVI IN

Preparations

1.2.5 Reverse Side (SE200 Series)

The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.

RGB IN

WER IN

Port Description

Connect to a PC using the DVI cable.

The [DVI IN] terminal is supplied for the digital (DVI)-dedicated models only.

Connect to a PC using the D-SUB cable.

Connect to an external device.

Connect the power cord for your monitor to the [POWER IN] port on the back of the product.

1 Preparations

+ 104 hidden pages