User Manual
SyncMaster
S23A950D / S27A950D
The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
BN46-00035A-07
The contents of this manual are subject to change without notice to improve quality.
© 2011 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
The SAMSUNG and SyncMaster logos are registered trademarks of Samsung Electronics.
Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
An administration fee may be charged if either
(a)an engineer is called out at your request and there is no defect in the product (i.e. where you have failed to read this user manual).
(b)you bring the unit to a repair centre and there is no defect in the product
(i.e. where you have failed to read this user manual).
The amount of such administration charge will be advised to you before any work or home visit is carried out.
The following images are for reference only. Real-life situations may differ from what is shown in the images.
A serious or fatal injury may result if instructions are not followed.
Warning
Caution |
Personal injury or damage to properties may result if instructions are |
|
not followed. |
||
|
Before Using the Product |
2 |
|
|
|
|
|
|
|
Before Using the Product
Activities marked by this symbol are prohibited.
Instructions marked by this symbol must be followed.
Before Using the Product |
3 |
|
|
|
|
|
|
|
Before Using the Product
Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning.
1.Power off the monitor and computer.
2.Disconnect the power cord from the monitor.
Hold the power cable by the plug and do not touch the cable with wet
hands. Otherwise, an electric shock may result.
3. Wipe the monitor with a clean, soft and dry cloth.
Do not apply a cleaning agent that contains alcohol, solvent, or surfactant to the monitor.
!
Do not spray water or detergent directly on the product.
4.Wet a soft and dry cloth in water and wring thoroughly to clean the
exterior of the monitor.
5. Connect the power cord to the product after cleaning the product. 6. Power on the monitor and computer.
!
Before Using the Product |
4 |
|
|
|
|
|
|
|
Before Using the Product
Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product. Be sure to allow the amount of space as shown below or greater when installing the product.
The appearance may differ depending on the product.
|
10 cm |
10 cm |
10 cm |
10 cm
10 cm
High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used
nearby.
Be sure to contact Samsung Customer Service Center (page 81) if the inside of the monitor needs cleaning. (service fee will be charged).
The following images are for reference only. Real-life situations may differ from what is shown in the images.
Before Using the Product |
5 |
|
|
|
|
|
|
|
Before Using the Product
Warning
Do not use a damaged power cord or plug, or a loose power socket.
An electric shock or fire may result.
Do not plug many products into the same power socket.
Otherwise, the socket may overheat and cause a fire.
Do not touch the power plug with wet hands.
Otherwise, an electric shock may result.
Insert the power plug all the way in so it is not loose.
An unstable connection may cause a fire.
!
!
!
Connect the power plug to a grounded power socket (type 1 insulated devices only).
An electric shock or injury may result.
Do not bend or pull the power cord with force. Do not weigh the power cord down with a heavy object.
A damaged power cord may cause an electric shock or fire.
Do not place the power cord or product near heat sources.
An electric shock or fire may result.
Remove foreign substances such as dust around the plug pins and power socket with a dry cloth.
Otherwise, a fire may result.
Before Using the Product |
6 |
|
|
|
|
|
|
|
Before Using the Product
Caution
|
Do not unplug the power cord when the product is in use. |
|
The product may become damaged by an electric shock. |
|
Do not use the power cord for products other than authorized products supplied |
|
by Samsung. |
! |
An electric shock or fire may result. |
|
|
|
Keep the power socket where the power cord is connected unobstructed. |
|
If any problem occurs in the product, unplug the power cable to completely |
! |
cut the power to the product. |
|
|
|
Power to the product cannot be completely cut off with the power button. |
|
Hold the plug when disconnecting the power cord from the power socket. |
An electric shock or fire may result.
!
Warning
DO NOT PLACE CANDLES,INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT.DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.
Otherwise, a fire may result.
Avoid installing the product in a narrow space with bad ventilation, such as a bookshelf or wall closet.
Otherwise, a fire may result due to an increased internal temperature.
Keep the plastic packaging bag for the product in a place that cannot be reached by children.
! |
Children may suffocate. |
Before Using the Product |
7 |
|
|
|
|
|
|
|
Before Using the Product
! |
Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.).
The product may fall and break or cause a personal injury.
Using the product in an area with excess vibration may damage the product or cause a fire.
Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke.
An electric shock or fire may result.
Do not expose the product to direct sunlight, heat, or a hot object such as a stove.
Otherwise, the product lifespan may be reduced, or a fire may result.
Do not install the product within the reach of young children.
The product may fall and injure children.
Caution
Take care not to drop the product when moving it.
Otherwise, product failure or personal injury may result.
!
Do not set down the product on its front.
The screen may become damaged.
When installing the product on a cabinet or shelf, make sure that the bottom edge of the front of the product is not protruding.
The product may fall and break or cause a personal injury.
Install the product only on cabinets or shelves of the right size.
Before Using the Product |
8 |
|
|
|
|
|
|
|
Before Using the Product
Put down the product carefully.
The product may fall and break or cause a personal injury.
!
SAMSUNG
!
Installing the product in an unusual place (a place exposed to a lot of fine particles, chemical substances or extreme temperatures, or an airport or train station where the product should operate continuously for an extended period of time) may seriously affect its performance.
Be sure to consult Samsung Customer Service Center (page 81) before installation if you want to install the product at such a place.
Warning
High voltage runs through the product. Do not attempt to disassemble, repair, or modify the product on your own.
An electric shock or fire may result.
Contact Samsung Customer Service Center (page 81) for repair.
Before you move the product, be sure to turn off the power switch and remove all the cables connected to the product, including the power cord and the antenna cable.
!
Otherwise, the power cord may be damaged and a fire or electric shock may result.
If the product generates a strange noise, a burning smell, or smoke, remove the power cord immediately and contact Samsung Customer Service Center (page 81).
!
An electric shock or fire may result.
Do not let children hang from the product or climb on top of it.
The product may fall, and your child may become injured or seriously harmed.
If the product falls or the exterior is damaged, power off the product, remove the power cord, and contact Samsung Customer Service Center (page 81).
Otherwise, an electric shock or fire may result.
Before Using the Product |
9 |
|
|
|
|
|
|
|
Before Using the Product
Do not put a heavy object, toy, or sweets on top of the product.
The product or heavy objects may fall as children try to reach for the toy or sweets resulting in a serious injury.
During a lightning or thunderstorm, remove the power cord and do not touch the antenna cable.
! |
An electric shock or fire may result. |
|
Do not drop objects on the product or apply impact.
An electric shock or fire may result.
!
!
!
GAS
Do not move the product by pulling the power cord or any cable.
Otherwise, the power cable may be damaged and product failure, an electric shock or fire may result.
If a gas leakage is found, do not touch the product or power plug. Also, ventilate the area immediately.
Sparks can cause an explosion or fire.
During a lightning or thunderstorm, do not touch the power cord or antenna cable.
Do not lift or move the product by the power cord or any cable.
Otherwise, the power cable may be damaged and product failure, an electric shock or fire may result.
Do not use or keep combustible spray or an inflammable substance near the product.
An explosion or fire may result.
Ensure the vents are not blocked by tablecloths or curtains.
Otherwise, a fire may result from an increased internal temperature.
Before Using the Product 10
Before Using the Product
Do not insert a metallic object (a chopstick, coin, hair pin, etc.) or inflammable
100
object (paper, match, etc.) into the vent or ports of the product.
If water or any foreign substance enters the product, be sure to power off the product, remove the power cord, and contact Samsung Customer Service Center (page 81).
Product failure, an electric shock or fire may result.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of the product.
If water or any foreign substance enters the product, be sure to power off the product, remove the power cord, and contact Samsung Customer Service Center (page 81).
Product failure, an electric shock or fire may result.
Caution
-_-
!
!
Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels.
If you are not going to use the product for an extended period of time, activate power-saving mode or a moving-picture screen saver.
Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc).
Otherwise, a fire may result from accumulated dust, overheating, an electric shock, or electric leakage.
Use the product at the recommended resolution and frequency.
Your eyesight may deteriorate.
Do not put DC power adapters together.
Otherwise, a fire may result.
Remove the plastic bag from the DC power adapter before you use it.
Otherwise, a fire may result.
Before Using the Product 11
Before Using the Product
Do not let water enter the DC power device or get the device wet.
An electric shock or fire may result.
Avoid using the product outdoors where it can be exposed to rain or snow.
Be careful not to get the DC power adapter wet when you wash the floor.
Do not put the DC power adapter near to any heating apparatus.
Otherwise, a fire may result.
Keep the DC power adapter in a well-ventilated area.
!
Looking at the screen too close for an extended period of time can deteriorate your eyesight.
!
Do not hold the monitor upside-down or move it by holding the stand.
The product may fall and break or cause a personal injury.
Do not use humidifiers or stoves around the product.
An electric shock or fire may result.
Rest your eyes for more than 5 minutes for every 1 hour of product use.
Eye fatigue will be relieved.
!
Do not touch the screen when the product has been turned on for an extended period of time as it will become hot.
Store the small accessories used with the product out of reach of children.
!
Before Using the Product 12
Before Using the Product
Exercise caution when adjusting the product angle or stand height.
|
|
! |
|
Otherwise, children's fingers or hands may become stuck and injured.
Tilting the product excessively may cause it to fall and result in personal injury.
Do not place heavy objects on the product.
Product failure or personal injure may result.
Use the product in the correct posture as follows:
Straighten your back.
Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at the screen.
Keep your eyes directly in front of the screen.
Adjust the angle so light does not reflect on the screen.
Keep your forearms perpendicular to your upper arms and level with the back of your hands.
Keep your elbows at about a right angle.
Adjust the height of the product so you can keep your knees bent at 90 degrees or more, your heels attached to the floor, and your arms lower than your heart.
Caution
Before Using the Product 13
BEFORE USING THE PRODUCT
PREPARATIONS
3D
2Copyright
2Icons used in this manual
2Symbols for safety precautions
4Cleaning
4Cleaning
5Securing the Installation Space
5Precautions for storage
5Safety Precautions
5Electricity and Safety
7Installation
9Operation
13 Correct posture to use the product
19 Checking the Contents
19Removing the Packaging
20Checking the Components
21 Parts
21 Frontal Buttons
23Reverse Side
24Tidying Up the Connected Cables
24Kensington Lock
25Adjusting the Product Tilt
26 3D
263D Mode
27Depth
28L/R Change
28 3D→2D
29 Standard HDMI-Compatible Formats
29Resolution Supported for PC Input (via the HDMI Port)
30Playing 3D Games on a PC
31Precautions when Viewing 3D Video
Table Of Contents 14
Table Of Contents
CONNECTING AND USING A SOURCE DEVICE
SCREEN SETUP
CONFIGURING TINT
32 Before Connecting
32 Pre-connection Checkpoints
32Connecting the Power
33Connecting and Using a PC
33 Connecting to a PC
35Driver Installation
36Setting Optimum Resolution
37Changing the Resolution Using a PC
39 Connecting to a Video Device
39 Connection Using the HDMI Cable
39Connecting Headphones
40MAGIC
40SAMSUNG MAGIC Angle
41SAMSUNG MAGIC Bright
42Configuring SAMSUNG MAGIC Color
43 Brightness
43 Configuring Brightness
43 Contrast
44 Configuring Contrast
44 Sharpness
44 Configuring Sharpness
45 Response Time
45 Configuring Response Time
45 HDMI Black Level
47 Red
47 Configuring Red
47 Green
47 Configuring Green
Table Of Contents 15
Table Of Contents
RESIZING OR RELOCATING THE SCREEN
SETUP AND RESET
48
48
48
49
50
50
51
51
52
52
52
52
53
53
53
54
55
55
56
58
59
61
61
61
61
62
62
63
63
Blue
Configuring Blue
Color Tone
Configuring the Color Tone Settings
Gamma
Configuring Gamma
Image Size
Changing the Image Size
H-Position
Configuring H-Position
V-Position
Configuring V-Position
Menu H-Position
Configuring Menu H-Position
Menu V-Position
Configuring Menu V-Position
ECO
Eco Motion Sensor
Eco Light Sensor
Eco Saving
Eco Icon Display
Menu Transparency
Changing Menu Transparency
Language
Changing the Language
PC/AV Mode
Configuring PC/AV Mode Settings
Auto Source
Configuring Auto Source
Table Of Contents 16
Table Of Contents
INFORMATION MENU AND OTHERS
TROUBLESHOOTING GUIDE
SPECIFICATIONS
63 Display Time
63 Configuring Display Time
64 Key Repeat Time
64 Configuring Key Repeat Time
65 Customized Key
65 Configuring Customized Key
65 Off Timer On/Off
65 Configuring Off Timer On/Off
66 Off Timer Setting
66 Configuring Off Timer Setting
67 Reset
67 Initializing Settings (Reset)
68 INFORMATION
68 Displaying INFORMATION
68Configuring Brightness in the Startup Screen
68Configuring Volume in the Startup Screen
70Requirements Before Contacting Samsung Customer Service Center
70 Testing the Product
70 Checking the Resolution and Frequency
70 Check the followings.
73 |
Q & A |
75General
76PowerSaver
78 Standard Signal Mode Table
Table Of Contents 17
Table Of Contents
APPENDIX
INDEX
81 Contact SAMSUNG WORLDWIDE
86Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only
87Terminology
Table Of Contents 18
1Open the packaging box. Be careful not to damage the product when you open the packaging with a sharp instrument.
2 Remove the Styrofoam from the product.
3 Check the components and remove the Styrofoam and plastic bag.
The appearance of actual components may differ from the image shown.
This image is for reference only.
4 Store the box in a dry area so that it can be used when moving the product in the future.
1 Preparations 19
1Preparations
Contact the dealer from whom you purchased the product if any item is missing.
The appearance of the components and items sold separately may differ from the image shown.
Components
Quick Setup Guide |
Warranty |
User Manual |
(Not available in some locations)
Cleaning cloth |
Power cable |
DC power adapter |
3D Glasses & 3D Glasses User |
DVI-Dual cable |
Wire holders |
Manual |
|
|
Components may differ in different locations.
The cleaning cloth is only supplied with the black high-glossy model.
1 Preparations 20
1Preparations
The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
If the MENU button is not visible, lightly tap the area around the [] button. The MENU button will become visible.
The onscreen display menu only appears when the MENU button light is lit.
The button light will remain on for 10 seconds and then dim.
1 Preparations 21
1Preparations
Icons |
Description |
|
|
|
Open or close the onscreen display (OSD) menu, or return to the last |
|
menu. |
|
OSD control lock: Maintain the current settings, or lock the OSD |
|
control to prevent unintended changes to settings. |
|
To lock the OSD control, press the MENU button [m ] for five |
|
seconds. |
m |
To unlock the locked OSD control, press the MENU button [m ] for |
|
more than five seconds. |
If the OSD control is locked,
Brightness, Contrast and 3D can be adjusted, and INFORMATION can be viewed.
The function that was configured as Customized Key before locking the OSD control can be used by pressing the [ ] button.
Confirm a menu selection.
Pressing the [ ] button when the OSD menu is not displayed will change the input source (Digital/HDMI/DP). If you power on the product or change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen.
Move to the upper or lower menu or adjust the value for an option on the
OSD menu.
Move to the left or right menu or adjust the value for an option on the
OSD menu.
Configure Customized Key and press []. The following options will be enabled.
3D - ECO - MAGIC - Image Size
To configure Customized Key, go to SETUP&RESET → Customized Key and select the mode you want.
Turn the screen on or off.
The power indicator will be lit when the product is operating normally.
This is a touch-type button. Tap the button lightly with a finger.
Refer to "10.2 PowerSaver" for details about the power-saving function.
To reduce power consumption, it is best to remove the power cable when you will not be using the product for an extended period of time.
1 Preparations 22
1Preparations
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
|
DISPLAYPORT IN |
DVI IN |
HDMI IN |
|
|
DC 14V |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Port |
Description |
|
Connects to a source device using an DP cable. |
|
Connects to a source device via a DVI cable. |
|
Connects to a source device using an HDMI cable. |
|
Connects to an audio output device such as headphones. |
|
Connects to the DC power adapter. |
1 Preparations 23
1Preparations
Tidy up the cables using the cable holder on the back of the stand.
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
An anti-theft lock allows you to use the product securely even in public places.
The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details.
To lock an anti-theft locking device:
1Fix the cable of your anti-theft locking device to a heavy object such as a desk.
2
3
4
Put one end of the cable through the loop on the other end.
Insert the locking device into the anti-theft lock slot at the back of the product.
Lock the locking device.
An anti-theft locking device can be purchased separately.
Refer to the user guide provided with your anti-theft locking device for details.
Anti-theft locking devices can be purchased at electronics retailers or online.
1 Preparations 24
1Preparations
The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
20°
You can adjust the tilt of your monitor.
Hold the lower part of the product and adjust the tilt carefully.
1 Preparations 25
23D
This feature allows you to view 3D content such as 3D movies. You can view 3D content
using(SyncMaster-dedicated) Samsung 3D glasses.
2.13D
You can purchase "SyncMaster-dedicated 3D glasses (model name: SSG-M3750CR)" separately. Contact the dealer you purchased the product from for details about purchasing the 3D glasses.
The product may not be compatible with 3D glasses other than the model specified above.
Power off the 3D glasses if you will not be using them. Otherwise, the battery life will decrease.
When you configure the display settings initially, change the frequency to 120Hz using the display settings menu on the Windows desktop.
*System requirements to play 3D PC games
|
Recomme |
|
Operating |
|
Basic Video Signal |
nded |
|
systems |
|
|
connection |
|
supported |
|
|
|
|
|
|
If an AMD HD5000 series |
DVI-D |
Display images in |
Windows 7, |
Recomme |
graphics card or higher is used |
|
FullHD Real 120Hz |
Vista |
nded |
|
|
mode |
|
|
|
|
|
|
|
Other graphics cards, such as |
DVI-D |
Display images in |
Windows 7, |
|
an nVIDIA graphics card or a |
|
Side-by-side 60Hz |
Vista, XP |
|
graphics card lower than AMD |
|
mode |
|
|
HD5000 series |
|
|
|
|
|
|
|
|
|
Important Health and Safety Information about Watching 3D Content
Warning. Please read the following safety information carefully before you use the 3D function.
Some viewers may experience dizziness, nausea or headaches when viewing 3D video. If this occurs, stop viewing 3D video immediately, take off the 3D glasses, and rest.
Viewing 3D video for an extended period of time may cause eye fatigue. If you experience eye fatigue, stop viewing 3D video, take off the 3D glasses, and rest.
Children must be constantly monitored by adults when using the 3D function. If your child shows any symptom such as eye fatigue, headache, dizziness, or nausea, stop the child from watching 3D video immediately to rest.
Do not use the 3D glasses for other purposes such as general eyeglasses, sunglasses, protective goggles, etc.
Do not use the 3D function or 3D glasses while moving. You may trip or fall and become injured.
Select the appropriate mode for the video input, and view 3D video.
Put on the 3D glasses, and select whichever 3D mode that offers the best 3D effect from 3D Mode.
2 3D |
26 |
|
23D
Configuring the 3D Mode
1Press [m ] on the product.
2Press [] to move to Picture and press [ ] on the product.
3Press [] to move to 3D and press [ ] on the product.
4Press [] to move to 3D Mode and press [ ] on the product. The following screen will appear.
3D |
|
|
|
3D Mode |
: |
|
|
Off |
|||
Depth |
|
2D→3D |
|
L/R Change |
|
Frame Sequential |
|
|
Top-Bottom |
||
3D→2D |
|
Side-by-Side |
Return |
Move |
Enter |
Off: Disable the 3D Mode function.
2D → 3D: Converts a normal video to 3D video.
Frame Sequential: Display the left and right images alternately in each frame.
Top-Bottom: Display the top and bottom images overlapping each other to allow you to experience the 3D effect.
Side-By-Side: Display the left and right images overlapping each other to allow you toexperience the 3D effect.
5Press [] to move to the option you want and press the [ ].
6The selected option will be applied.
2.1.2Depth
Determines the three-dimensional effect of the 3D video.
Configuring Depth
1Press [m ] on the product.
2Press [] to move to Picture and press [ ] on the product.
3Press [] to move to 3D and press [ ] on the product.
2 3D |
27 |
|